PICKUPS AND ELECTRONICS

The MicroXTCT (uXTCT) Preamp in the Swordtail Tailpiece provides 3 band tone control – Bass andTreble boost and cut are controlled by convenient stacked knobs, and Mid cut is set by an internaltrimmer. The Swordtail features 2 inputs as RCA jacks which can be balanced with a Blend control.The system has a standard ¼” output jack and Master Volume control. The switch can be used tobypass the preamp for a passive output of the Upper Input only. The system is powered directly bya 9V battery which will last for up to a year of typical use.

Glasser NY - Swordtail Dual Input Active Bass Tailpiece System

R170625.1

TU

µX

TCT

Ma

de

in U

SA

NC

Gro

un

d

EQ 2

Ou

tpu

tEQ

1

Inp

ut

EQ 3

EQ 4

+9V

Bat

t

Key

500KX2 5A5C250K 30A250K

Mid

25KΩ

Bass VolumeBlendTrebleOutput

LowerInput

UpperInput

BypassSwitch

9V Battery Clip

Bass Mid Treble Input Impedance Output Impedance Power

+/-12dB@50Hz -16dB@500Hz +/-13dB@6KHz 250KΩ || 470KΩ 6KΩ 650uA@9V

Wiring Diagram

Specifications

PICKUPS AND ELECTRONICS

The MicroXTCT (uXTCT) Preamp in the Swordtail Tailpiece provides 3 band tone control – Bass andTreble boost and cut are controlled by convenient stacked knobs, and Mid cut is set by an internaltrimmer. The Swordtail features an RCA jack input for connection to your favorite Piezo orMicrophonic pickup system. The system has a standard ¼” output jack and Master Volume control.The switch can be used to bypass the preamp for a passive output. The system is powered directlyby a 9V battery which will last for up to a year of typical use.

Glasser NY - Swordtail Single Input Active Bass Tailpiece System

R170625.1

Bass Mid Treble Input Impedance Output Impedance Power

+/-12dB@50Hz -16dB@500Hz +/-13dB@6KHz 250K || 470KΩ 6KΩ 650uA@9V

Wiring Diagram

Specifications

TU

µX

TCT

Ma

de

in U

SA

NC

Gro

un

d

EQ 2

Ou

tpu

tEQ

1

Inp

ut

EQ 3

EQ 4

+9V

Bat

t

Key

30A250KA500KA500KMid

25KΩ

VolumeBassTrebleOutput

InputBypassSwitch

9V Battery Clip

PICKUPS AND ELECTRONICS

AA

A

AA

A

TU

VTCTMade in USA

Battery +

Ground

EQ 2

OutputEQ 1

Input

EQ 3EQ 4

NC

Key

The ViolinTCT (VTCT) Preamp in the Active Violin System provides 2 band tone control – Bass andTreble boost and cut are controlled by convenient stacked knobs. The frequency response wasdeveloped specifically for violin to reduce unwanted noise, undesirable overtones, and distortion.The system has a standard ¼” output jack and Master Volume control. The system is powereddirectly by 2 AAA batteries which will last for up to a year of typical use and provide a lowimpedance output at up to 9V.

Glasser NY – Active Violin System

R170831.1

Bass Mid Treble Input Impedance Output Impedance Power

+/-6dB@165Hz -8dB@1KHz +/-5dB@4KHz 500KΩ 6KΩ 1.2mA@3V

Wiring Diagram

Specifications

Bass

Volume

Treble

OutputInput from Piezo Bridge