gexol cir - intop - international top products - home cir cir® power cable gexol® insulated three...

Crush and Impact Resistant Without External ArmoringCrush and Impact Resistant Without External Armoring

®

Superior FlexibilitySafer to HandleLower TotalInstallation Costs

Superior FlexibilitySafer to HandleLower TotalInstallation Costs

CIRCIR

The Global Cable Solutions CompanyThe Global Cable Solutions Company

GexolGexol®

� Shortest Lead Times• Standard 8 - 10 weeks• Emergency 2 - 4 weeks

� Best On Time Delivery Rate

(99%+ in the last 36 months)*

*Visit www.AmerCable.com for our most current on-time delivery rate

IInnddeexx

AmerCable believes the information presented throughout this catalog to be reliable and current. All information is subject to change without notice. The information listedis approximate, and is presented only as a guide for product selection. We make no claims or warranties for the suitability of any product for any particular application.

Gexol® is a registered trademark of AmerCable Incorporated. Registered in the U.S. Patent and Trademark Office. © 2008 AmerCable Incorporated

CIR Power Cables

• Three & Four Conductor + Ground . . . . . . . . . . . . . . 1- 2

CIR Control Cable

• Multi-Conductor . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3

CIR Instrumentation Cables

• Individually Shielded Pairs . . . . . . . . . . . . . . . . . . . . . . . 4

• Individually Shielded Triads . . . . . . . . . . . . . . . . . . . . . . 4

CIR Type VFD Cable

• Three Conductor . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 - 6

Stranding Profile / Cable Color Codes. . . . . . . . . . . . . . 7

Assemblies . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8

Why Specify CIR? . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9

CIRCIRGexol®

®

Crush and Impact Resistant Without External Armoring

Passes the same stringent crush and impact testing required by

UL 2225 for Type MC-HL

Faster and Easier to Install than Metal Clad

Easier! Faster! Safer!

CIR® is the fastest, safest crush-proof cable to install. Metal clad cable installationrequires an expensive box of tools and a multi-step procedure for jacket removal.

To prep CIR – all you need is a knife!

CIR® Ratings & Approvals� 90°C temperature rating� UL Listed as Marine Shipboard Cable (E111461)� UL Listed as Type TC-ER (E123629)� American Bureau of Shipping (ABS) (99-BT5905-X)� Flame Retardant – IEEE 1202� Suitable for use in Class I, Div 2 and

Zone 2 environmentsNOTE: Armored cables are required in Class I,

Division 1 and Zone 1 environments.

JacketA black, flame retardant,oil, abrasion, chemical and sunlight resistant thermoplastic compoundmeeting UL 1309/CSA 245and IEEE 1580.

ConductorSoft annealed flexiblestranded tinned copper perIEEE 1580 Table 11.

InsulationGEXOL® cross-linkedflame retardantpolyolefin, meeting the requirements for Type P of IEEE 1580and Type X110 of UL 1309/CSA 245.600V/IEC 1000V.

Gexol® and CIR® are registered trademarks of AmerCable Incorporated.

ApplicationDesigned and constructed to be a flexiblealternative to Type MC cable where userdesires the added crush and impactprotection.

Features� Passes the same stringent crush and impact

testing required by UL 2225 for Type MC-HL� Gas & vapor tight – impervious to water and air� Smaller bend radius (up to 40% smaller)

than Type MC� Reduced tray fill (up to 35% less) compared

to Type MC� Considerably more flexible than Type MC� Reduced installation time and cost compared

to Type MC� Glands for this product cost up to 50% LESS

than those for Type MC

37-102 CIR

CIR® Power CableGexol® InsulatedThree & Four Conductor + Ground • 0.6/1kV • Rated 90°C

Safe to HandleCIR® has no sharp metal armor edges that imperil worker’shands during splicingand installation ofconnectors

Oil & Gas Cables

1www. amercable.com • e-mail: [email protected]

37-102 CIR

CIR® Power CableGexol® InsulatedThree & Four Conductor + Ground • 0.6/1kV • Rated 90°C

Ampacities are based on Table 310.16 of the National Electrical Code (NEC) for conductors rate 90°C, in a multi-conductor cable, at an ambient temperature of30°C. The 75°C column is provided for additional information. The ampacities shown apply to open runs of cable, installation in any approved raceway. Deratingfor more than three current carrying conductors within the cable is in accordance with NEC Table 310.15 (B) (2) (a). The ampacities shown also apply to cablesinstalled in cable tray in accordance with NEC Section 392.11.

Conductor Size Grounding Nominal DC Resistance AC Resistance Inductive Voltage DropAWG/ Number of Conductor Part No. Diameter Weight 90°C NEC 75°C NEC at 25°C at 90°C, 60Hz Reactance (Volts/Amp/kcmil mm2 Conductors AWG/kcmil 37-102 (inches) (lbs/1000 ft.) Ampacity Ampacity Ampacity (ohms/1000 ft.) (ohms/1000 ft.) 1000 ft.)

14 2.1 3 3 #18 -508CIRG 0.487 161 15 15 2.91 3.64 0.04 5.06914 2.1 4 3 #18 -509CIRG 0.535 187 15 15 2.91 3.64 0.04 5.07212 3.3 3 3 #16 -516CIRG 0.537 210 20 20 1.83 2.28 0.03 3.19512 3.3 4 3 #16 -517CIRG 0.578 246 20 20 1.83 2.28 0.04 3.19810 5.2 3 3 #14 -308CIRG 0.580 277 30 30 1.15 1.44 0.03 2.02810 5.2 4 3 #14 -408CIRG 0.685 367 30 28 1.15 1.44 0.03 2.0318 7.6 3 10 -309CIRG 0.760 431 55 50 0.708 0.885 0.034 1.2618 7.6 4 10 -409CIRG 0.821 513 44 40 0.708 0.885 0.037 1.2636 12.5 3 8 -310CIRG 0.844 585 75 65 0.445 0.556 0.032 0.8036 12.5 4 8 -410CIRG 0.915 705 60 52 0.445 0.556 0.035 0.8064 21 3 6 -312CIRG 0.944 774 95 85 0.300 0.376 0.029 0.5504 21 4 6 -412CIRG 1.036 956 76 68 0.300 0.376 0.032 0.5532 34 3 6 -314CIRG 1.094 1105 130 115 0.184 0.230 0.028 0.3472 34 4 6 -414CIRG 1.203 1381 104 92 0.184 0.230 0.030 0.350

1/0 54 3 6 -316CIRG 1.331 1669 170 150 0.117 0.147 0.028 0.2321/0 54 4 6 -416CIRG 1.468 2107 136 120 0.117 0.147 0.030 0.2352/0 70 3 4 -317CIRG 1.450 2062 195 175 0.0929 0.1174 0.0270 0.1902/0 70 4 4 -417CIRG 1.602 2585 156 140 0.0929 0.1174 0.0296 0.1934/0 109 3 4 -319CIRG 1.769 3151 260 230 0.0585 0.0753 0.0261 0.1314/0 109 4 4 -419CIRG 1.953 3972 208 184 0.0585 0.0753 0.0287 0.134250 127 3 3 -330CIRG 1.906 3493 290 255 0.0488 0.0635 0.0263 0.115250 127 4 3 -430CIRG 2.106 4510 232 204 0.0488 0.0635 0.0290 0.118350 177 3 3 -331CIRG 2.171 4594 350 310 0.0344 0.0456 0.0256 0.090350 177 4 3 -431CIRG 2.402 5900 280 248 0.0344 0.0456 0.0283 0.093500 253 3 2 -333CIRG 2.521 6207 430 380 0.0251 0.0348 0.0258 0.075500 253 4 2 -433CIRG 2.855 8178 344 304 0.0251 0.0348 0.0284 0.078750 380 3 1 -334CIRG 3.035 9165 535 475 0.0166 0.0253 0.0252 0.061750 380 4 1 -434CIRG 3.365 11883 428 380 0.0166 0.0253 0.0278 0.063

CIR® Power Cable

HawkeGland Types Type CIR

Industrial & Safe Area (IP68) 121Increased Safety

501/421“EExe”Explosion Proof 710

Class I, Div. 2Class I, Zone 1 & 2

Flameproof 501/421“EExd” Zone 1 & 2

Hawke Gland Types

Type CIR

IEEE 45 6X Diameter

NEC < 1" (25mm)4X Diameter> 1" (25mm) < 2" (50mm)5X Diameter> 2" (50mm) 6X Diameter

Bend Radius

Oil & Gas Cables

Manufactured by AmerCable Incorporated • 800-506-9473 • 713-896-5800 • Fax: 713-849-90092 v2.08.1

For Cable Color Codes and Stranding Information see page 7


37-102 CIR

CIR® Control CableGexol® InsulatedMulti-Conductor • 0.6/1kV • Rated 90°C



ConductorSoft annealed flexiblestranded tinned copper perIEEE 1580 Table 11.Insulation

GEXOL® cross-linked flameretardant polyolefin, meeting the requirements for Type Pof IEEE 1580 and Type X110of UL 1309/CSA 245.600V/IEC 1000V.

Ampacities are based on Table 310.16 of the National Electrical Code (NEC) for conductors rate 90°C, in a multi-conductor cable, at an ambienttemperature of 30°C. The 75°C column is provided for additional information. The ampacities shown apply to open runs of cable, installation in anyapproved raceway. Derating for more than three current carrying conductors within the cable is in accordance with NEC Table 310.15 (B) (2) (a).The ampacities shown also apply to cables installed in cable tray in accordance with NEC Section 392.11.

Conductor Size Nominal DC Resistance AC Resistance Voltage DropNumber of Part No. Diameter Weight 90°C NEC 75°C NEC at 25°C at 90°C, 60Hz (Volts/Amp/

AWG mm2 Conductors 37-102 (inches) (lbs/1000 ft.) Ampacity Ampacity (ohms/1000 ft.) (ohms/1000 ft.) 1000 ft.)14 2.1 2 -507CIR 0.466 129 15 15 2.91 3.64 5.06914 2.1 3 -508CIR 0.487 147 15 15 2.91 3.64 5.06914 2.1 4 -509CIR 0.535 174 15 15 2.91 3.64 5.07214 2.1 5 -510CIR 0.562 206 15 15 2.91 3.64 5.07214 2.1 7 -521CIR 0.602 249 15 14 2.91 3.64 5.07214 2.1 9 -764CIR 0.796 289 15 14 2.91 3.64 5.07214 2.1 12 -585CIR 0.839 426 12 10 3.00 3.75 5.22414 2.1 19 -765CIR 0.933 677 12 10 3.00 3.75 5.22414 2.1 37 -514CIR 1.287 1138 10 8 3.00 3.75 5.22412 3.3 2 -515CIR 0.512 163 20 20 1.83 2.28 3.19512 3.3 3 -516CIR 0.532 192 20 20 1.83 2.28 3.19512 3.3 4 -517CIR 0.578 227 20 20 1.83 2.28 3.19812 3.3 5 -560CIR 0.682 305 20 20 1.83 2.28 3.19812 3.3 7 -712CIR 0.730 374 20 17 1.83 2.28 3.19812 3.3 9 -766CIR 0.893 435 20 17 1.83 2.28 3.19812 3.3 12 -750CIR 0.913 576 15 12 1.88 2.35 3.29412 3.3 19 -767CIR 1.130 1007 15 12 1.88 2.35 3.29412 3.3 37 -520CIR 1.448 1739 12 10 1.88 2.35 2.02810 5.2 2 -553CIR 0.552 204 30 30 1.15 2.35 2.02810 5.2 3 -308CIR 0.580 243 30 30 1.15 1.44 2.03110 5.2 4 -408CIR 0.685 335 30 28 1.15 1.44 2.03110 5.2 5 -561CIR 0.736 397 30 28 1.15 1.44 2.03110 5.2 7 -591CIR 0.790 488 28 24 1.15 1.44 2.03110 5.2 9 -768CIR 0.805 575 28 24 1.15 1.44 2.03110 5.2 12 -762CIR 1.079 980 20 17 1.18 1.48 2.092

ApplicationDesigned and constructed to be a flexible alternative to Type MC cable where user desires the added crush and impact protection.


testing required by UL 2225 for Type MC-HL� Gas & vapor tight – impervious to water & air� Smaller bend radius (up to 40% smaller)





See page 1 for Ratings & Approvals

For Cable Color Codes and Stranding Information,

see inside back cover.


Oil & Gas Cables

3v2.08.1

37-102 CIR

CIR® Instrumentation CableGexol® InsulatedIndividually Shielded Pairs/Triads • 0.6/1kV • Rated 90°C



ConductorSoft annealed flexiblestranded tinned copper perIEEE 1580 Table 11.

InsulationGEXOL® cross-linkedflame retardant polyolefin, meeting the requirementsfor Type P of IEEE 1580and Type X110 of UL 1309/CSA 245.600V/IEC 1000V.

Pairs/TriadsEach pair/triad is twistedwith a bare tinned drainwire. Each pair/triad is shielded with polyester-backed aluminum foil tape toafford 100% coverage.Pair to pair, or triad totriad, isolation – plusoverall shielding – is provided.

ApplicationDesigned and constructed to be a flexible alternative to Type MC cable where user desires the added crush and impact protection.


testing required by UL 2225 for Type MC-HL� Gas & vapor tight – impervious to water & air� Smaller bend radius (up to 40% smaller)





Conductor Nominal DC Resistance MutualSize Part No. Diameter Weight 20°C Capacitance Inductance

AWG mm2 Pairs Triads 37-102 (inches) (lbs/1000 ft.) (ohms/1000 ft.) (nF/1000 ft.) (mH/1000 ft.)16 1.3 1 – -610CIR 0.437 106 4.52 32 0.2016 1.3 2 – -611CIR 0.700 279 4.52 32 0.2016 1.3 4 – -613CIR 0.790 340 4.52 32 0.2016 1.3 8 – -616CIR 1.075 702 4.52 32 0.2016 1.3 12 – -618CIR 1.275 1062 4.52 32 0.2016 1.3 24 – -699CIR 1.637 1560 4.52 32 0.2016 1.3 – 1 -668CIR 0.467 128 4.52 32 0.2016 1.3 – 4 -698CIR 0.930 453 4.52 32 0.2016 1.3 – 8 -677CIR 1.130 825 4.52 32 0.2016 1.3 – 12 -734CIR 1.380 1235 4.52 32 0.20

#16 Pairs / Triads

Capacitance – nF/1000 feet = 32

Inductance – mH/1000 = 0.20

Resistance – Ohms/1000 feet = 4.52 (@ 20°C)

VALUES:See page 1

for Ratings &Approvals

For Cable Color Codes and Stranding

Informationsee page 7


Oil & Gas Cables


37-102 CIRVFD

CIR® Type VFD Power CableGexol® InsulatedThree Conductor • 2kV • Rated 90°C

ApplicationA flexible, braid and foil shielded, 2kV powercable specifically engineered for use in variablefrequency AC motor drive (VFD) applications.

Features� Specially engineered cable design produces

a longer cable life in VFD applications.� Overall braid and foil shield provides 100%

coverage containing VFD EMI emissions.� Symmetrical insulated ground conductors

reduce induced voltage imbalances and carry common mode noise back to the drive.

� High strand count conductors and braid shield design is much more flexible, easier to install and more resistant to vibration than Type MC cable.

� Gexol’s lower dielectric constant (standardXLPEs, EPRs and other Type P insulationmaterials have higher dielectric constants)reduces reflected wave peak voltage magnitudes. This allows for longer output cable distances and minimizes the effect of high frequency noise induced into the plant ground system.

� 2kV insulation thickness resists the repetitive2x voltage spikes from 600V VFDs andreduces drive over current trip problems due to cable charging current.

� Passes the same stringent crush and impact testing required by UL 2225 for Type MC-HL

� Gas & vapor tight – impervious to water and air� Smaller bend radius (up to 40% smaller)


to Type MC� Considerably more flexible than Type MC� Reduced installation time and cost compared to

Type MC� Glands for this product cost up to 50% LESS


Insulation (2kV)Gexol® cross-linked flame retardant polyolefin, meeting the requirements for Type P of IEEE 1580 and Type X110 of UL 1309/CSA 245. Color: Gray with

printed phase I.D. (Black-White-Red)

JacketA black, flame retardant, oil, abrasion,chemical and sunlightresistant thermoplasticcompound meeting UL1309/CSA 245 and IEEE 1580.

Power Conductors (x3)Soft annealed flexiblestranded tinned copperper IEEE 1580 Table 11.

Ground Conductors (x3)Soft annealed flexible stranded tinned copper per IEEE 1580 Table 11.Gexol® insulation sized per UL 1277.Color: Green

ShieldOverall tinned copperbraid plus aluminum/polyester tape providing100% coverage.

CIR® Ratings & Approvals� 90°C temperature rating� UL Listed as Marine Shipboard Cable

(E111461)� UL Listed as Type TC-ER (E123629)� American Bureau of Shipping (ABS)

(99-BT5905-X)� Flame Retardant – IEEE 1202� Suitable for use in Class I, Div 2 and

Zone 2 environmentsNOTE: Armored cables are required in Class I,

Division 1 and Zone 1 environments.

Oil & Gas Cables



37-102 CIRVFD

CIR® Type VFD Power CableGexol® InsulatedThree Conductor • 2kV • Rated 90°C

Gexol® and CIR® are registered trademarks ofAmerCable Incorporated.

SSiizzee NNoommiinnaall WWeeiigghhttAAWWGG// PPaarrtt NNoo.. DDiiaammeetteerr PPeerr 9900˚̊CC NNEECC 7755˚̊CC NNEECCkkccmmiill 3377--110022 IInncchheess** 11000000 FFtt.. SSiizzee ((AAWWGG)) AAmmppaacciittyy AAmmppaacciittyy

14 -508CIRVFD 0.540 194 18 15 15

12 -516CIRVFD 0.590 224 18 20 20

10 -308CIRVFD 0.633 308 14 30 30

8 -309CIRVFD 0.764 441 14 55 50

6 -310CIRVFD 0.865 570 12 75 65

4 -312CIRVFD 1.072 886 12 95 85

2 -314CIRVFD 1.215 1421 10 130 115

1/0 -316CIRVFD 1.443 1803 10 170 150

2/0 -317CIRVFD 1.572 2153 10 195 175

4/0 -319CIRVFD 2.053 3463 8 260 230

262 -320CIRVFD 2.193 4175 6 297 262

373 -322CIRVFD 2.501 5415 6 364 322

535 -324CIRVFD 2.972 7483 6 446 394

777 -327CIRVFD 3.388 10395 4 546 483

GGrreeeenn IInnssuullaatteeddGGrroouunnddiinngg CCoonndduuccttoorr ((xx33))

andhas a

low capacitance for superior performance in

VFD applications!

Gexolis

flexible

Oil & Gas Cables

See page 7 for Stranding Profile

CIR® VFD Power Cable


Ampacities are based on Table 310.16 of the National Electrical Code (NEC) for conductorsrate 90°C, in a multi-conductor cable, at an ambient temperature of 30°C. The 75°C columnis provided for additional information. The ampacities shown apply to open runs of cable,installation in any approved raceway. Derating for more than three current carryingconductors within the cable is in accordance with NEC Table 310.15 (B) (2) (a). Theampacities shown also apply to cables installed in cable tray in accordance with NECSection 392.11.

*Cable diameters are subject to a +/- 5% manufacturing tolerance

Power Cables6 AWG and smaller = colored insulation

4 AWG and larger = print

Conductor # Color

1 Black

2 Red

3 Blue

4 Orange

Instrumentation CablesPairs Black, WWhhiittee

Triads Black, WWhhiittee, Red

Pair / Triad numberprinted on conductors

Control CablesColored Insulation

Conductor # Base Color Tracer Color

1 Black –

2 Red –

3 Blue –

4 Orange –

5 Yellow –

6 Brown –

7 Red Black

8 Blue Black

9 Orange Black

10 Yellow Black

11 Brown Black

12 Black Red

13 Blue Red

14 Orange Red

15 Yellow Red

16 Brown Red

17 Black Blue

18 Red Blue

19 Orange Blue

20 Yellow Blue

21 Brown Blue

22 Black Orange

23 Red Orange

24 Blue Orange

25 Yellow Orange

26 Brown Orange

27 Black Yellow

28 Red Yellow

29 Blue Yellow

30 Orange Yellow

31 Brown Yellow

32 Black Brown

33 Red Brown

34 Blue Brown

35 Orange Brown

36 Yellow Brown

37 Black –

Individual Closest Equivalent UninsulatedSize Number Strand Dia. IEEE 45 Metric Size Conductor

AWG/kcmil of Strands (inches) Std. Size (mm2) Dia. (inches)

161412108642

1/02/04/0

250350500750

191919373761

133133266342532627888

12211850

0.0117 0.0147 0.01850.01670.0201 0.0201 0.01770.0223 0.0201 0.0201 0.0201 0.0201 0.0201 0.0201 0.0201

346

1016264166

106133212250350500750

1.32 2.083.29 5.23 7.57

12.49 21.11 33.51 54.45 70.01

108.91 127177253380

0.059 0.0740.093 0.113 0.1360.1750.2580.3240.4070.4610.5750.6340.7570.8881.093

CCIIRR SSttrraannddiinngg PPrrooffiillee

Crush and ImpactResistant WithoutExternal Armoring.

Safer to Handle.Easier to Install.

Crush and ImpactResistant WithoutExternal Armoring.

Safer to Handle.Easier to Install.

CIR® Cable Color CodesCIR® Cable Color Codes

For faster, safer installation, lower overall costsand on-time delivery – specify AmerCable CIR®

7

Precision Engineered

Cable AssembliesTurn-key cable assembly solutions for hazardous and industrial environments

Constructions:� 300V – 15kV AC� DC Power� Composite Power

& Control� Instrumentation� Thermocouple� Fiber Optic� Electro-Optic

Applications:� Service Loops� Driller’s Console� Mud Pump Controls� 15kV Bridle Assembly� Tender-to-Platform Bridle� Ship-to-Shore Power� Portable Power

Generation� Zone 1 (EX) Rated

Cable Assemblies (800) 506-9473www.amercablesystems.com

� Fast Delivery

� Job-site application evaluation and consultation

� Highly reliable cable assemblies custom built and tested to spec

Cable Assemblies from AmerCable Systems

save you time & money!

TOP DRIVESERVICELOOPS


Data Basis:1. Labor rate $35.00/hr.

2. Labor time quotes based on long established Fluor Daniel ProjectControls Standard Unit for Type TC and Type CWCMC cables forinstallation tray.

3. Identical installation for both products using a 100 ft. run basis.

4. Hawke A121 series glands used for CIR® cables and Hawke N701 glandsused for Type CWCMC cables.

5. MRO pricing is used for cables and glands.

The True Cable Cost Comparison

Lower Total Installed CostAmerCable CIR® vs. Type CWCMC (MC-HL)Based on 100 ft. of cable, 2 glands and installation labor (cable & glands)

16 AWG 1 Shielded Pair ...................... CIR® Saves you 36%

14 AWG 3/C+G......................................CIR® Saves you 37%

6 AWG 3/C+G........................................CIR® Saves you 38%

4 AWG 3/C+G........................................CIR® Saves you 33%

2/0 4/C+G ............................................ CIR® Saves you 10%Glands for CIR Cables cost up to 50% LESS


Easy on the Hands – and the Cable Handler

� Crush and Impact Resistantwithout external armoring –Passes the same stringent crush and impact testing requiredby UL 2225 for Type MC-HL

� Fastest Lead Times• Standard 8 - 10 weeks• Emergency 2 - 4 weeks

� Best On Time Delivery(99%+ in the last 36 months)

� Gas & vapor tight – impervious to water and air

� Smaller bend radius – up to 40% smaller than Type MC

� Reduced tray fill – up to 35% less comparedto Type MC

� Insulated with Gexol® – AmerCable’s exclusive insulating compound provides superiorflexibility, dielectric propertiesand field proven performance inthe most severe, isolatedoperating environments.

� Ergonomically Superior From an ergonomic perspective,CIR is safer to handle. To readthe complete ergonomic report, visit our website atwww.AmerCable.com / Oil &Gas / CIR Cables and click on“What’s So Great About CIR?”

Why Specify AmerCable CIR®?Why Specify AmerCable CIR®?

No jaggedmetal edges

Smoothflexiblejacket

for easyhandling

CIR does not expose cable handlers to sharp metalarmor edges during splicing and installation –meaning less potential work-loss injuries.CIR also reduces the potential for repetitive straininjury due to it’s greater flexibility and smoother outer surface. CIR also has a 40% smaller bendradius than Type MC.

AmerCable is an ISO 9001 certified cable manufacturerthat combines leading-edge manufacturing technology,

innovative thinking, and high quality service to deliver the finest oil & gas cable productsavailable.

AmerCable serves the world from our Oil & Gas Group headquarters in Houston, Texas. Ourprofessional field engineers and sales force work withyou to create innovative, cost effective project solutions.

What can you expect from AmerCable?� Fastest Lead Times in the Industry

(Standard 8 - 10 weeks / Emergency 2 - 4 weeks)� On-Time Delivery (99%+ in the last 36 months)� Professional Sales, Support and Service� Strategic Inventory Locations

3/08© 2008, AmerCable Incorporated

10633 West Little York • Building #1 • Suite #100 • Houston, TX 77041 800-506-9473 • 713-896-5800 • Fax: 713-849-9009 • e-mail: [email protected] • www.amercable.com

The industrystandard forflexible, highperformanceType P cables.

Premium-level high performanceIEC cables

Precisionengineered cable assembliesfor hazardousand industrialapplications.

Low smokehalogen-freefire resistantor flame retardant Type P cables.

Meets BOTH IECand IEEE marineshipboard cablestandards.

Foil shielded,power cablesengineered for use in variablefrequency AC driveapplications.

Available in severalconstructions

AmerCable’s manufacturing facility in El Dorado, Arkansas.OOiill && GGaass CCaabblleess

gexol cir - intop - international top products - home cir cir® power cable gexol® insulated three...

Documents