get the speed you need - knoglemekanik · get the speed you need. small - powerful - inspiring this...
TRANSCRIPT
Aesculap Power Systems
Aesculap® microspeed uniGet the speed you need
Small - powerful - inspiring
This completely innovative high speed motorfrom Aesculap sets a new milestone in the field of electric motor systems.By means of a new, patented motor technology,it has been possible to achieve what, you as asurgeon and we as the developers of the firstelectric motor for surgical use, have been dreaming of for years: a high speed electric motor that is as small and powerful as a fineespresso!
You will be inspired by this unique innovation.
small – powerful – inspiring ....
Get the speed you need.
2
Small
Until today the size of an electric high speedmotor was limited. Excessive heat generationand lack of power were the two major prob -lems. Only by means of an exceptional tech-nological leap Aesculap was able to over comethis technical obstacle. Resulting in the microspeed uni XS motor - the smallest highspeed electric motor in its speed class on theglobal market. Combined with the slimline,ergonomic Hi-Line XS hand pieces and theHi-Line XS precision tools, the compact microspeed uni XS high speed motor allowsfor optimum visibility of the operation site,even in deep and very small accesses.
Powerful
Small - but as powerful as its larger counter -parts. The microspeed uni XS motor showsits true greatness in clinical use. Thanks toits new patented motor technology, cuttingoperations can be performed at a constantpower and a speed of 80.000 rpm. The microspeed uni XS motor thus performshigh-torque skull perforation as effortlesslyas it does burring procedures to the vertebral column. You will undoubtedly be impressed by thiscompact power pack.
..................................small – powerful –
inspir
ing
3
4
Relax – the power is in your hand.
ergonomic, lightweight and quiet...........
Ergonomic, lightweight and quiet - absolute perfection!
With a weight of under 100 g and an out stan dingdesign, the microspeed uni XS motor nestles likea pencil in your hand. The sure grip profile of the compatible Hi-Line XShandpieces round off this ergonomic master piece.Fatigue free operation, however, also means noise-free operation. The extremely low noise level ofthe new high speed motor re presents a further accomplishment of this innovative and unique motor concept.
Highest reliability
The revolutionary motor technology coupled withtop-grade materials and high-precision productionmethods afford the microspeed uni XS motor the highest level of quality and reliability.
................................................absolute perfe
ction
5
6
Relax – the power is in your hand.
The control unit - High tech forintuitive and easy operation
Touch Screen with clear, self-explainingsymbols and intuitive user dialog for easyoperationCustomizable settings: Acceleration and stopping characteristics for individual motors, oscillation angle and much morecan be adapted to your indi vi dual pre -ferenceThe versatile control unit combined with the microspeed uni motors and hand pieces designed for specific indi-cations makes it a perfect system for
NeuroNeurotologySpineSmall boneArthroscopy
Two motor connection sockets for effort -less switching between the motorsIntegrated irrigation pump allows precise adjustments of the pump flow
The foot controls
Their high-quality finish and resistance againstfluids ensure a long lifetime for our foot controlswitches. Two options of foot switches are avail -able - one pedal or two pedals.
GD668 GD671
GD670
The motor cables
The motor cables are available either with handcontrol or for use with our foot control pedals.
GD673GD672
The motors
Specialized motors for special requirements
The eight microspeed uni motors havebeen designed especially for the indi -
cation specific requirements. Com binethem with its three spe cialized handpie-
ce ranges, Hi-Line XS, micro-Line, mini-Line and you get the system according to
your wishes.
Unrestricted cleanability The high-grade titanium motors and motor cablescan be safely processed with alkaline cleaningagents. With Eccos, the ingenious storage and cleaning system, they can be washed simply andpractically in the washing machine. For more in -formation please refer to page 21.
Top grade materialState-of-the art manufacturing technology, yearsof experience in the field surgical motors, andthe application of top-grade material such as titanium make a product of value and quality.
7
GD682
GD675
GD674
GD676
GD681
GD684
GD678
GD685
8
microspeed uni –for neuro, neurotology and spine
microspeed uni XS high speed motor GD675
Smallest and lightest high speed motor with a speed range of 10.000 - 80.000 rpm!Constant power through special motor actuationLow heat generation - despite extremelycompact design and maximum powerExtremely quiet
Acceleration and stopping characte -ristics can be adjusted to individual requirementsUnrestricted motor guidance thanks to particularly thin and flexible motor cableEasy handling of the eXtra Slim Hi-Line XS handpiecesSmooth-running and vibration-free
Precise interventions require instruments that are especially adapted to the task
In order to perform high-precision neuro, neuro-tolo gical and spinal procedures, surgical instru-ments that do not impair the tactile sense are ofenormous impor tance. Moreover, new, minimallyinvasive access techniques increasingly requirethe use of miniaturized instruments for the pur-pose of enhancing visibility of the operating site.
During the development of our motor systems,the focus is therefore always on a design which is adapted to the latest access techniques and the most recent findings in ergonomics.
Compatible with all Hi-Line and Hi-Line XS handpiecesCan be combined with motor cables with hand control or with foot control pedalsSpeed range: 10.000 - 80.000 rpmConstant power through special motor actuationAcceleration and stopping characteristics can be adjusted to individual requirements
9
Spray nozzles for Hi-Line XS handpieces
Handpiece Spray nozzleCraniotome/multi GB767SUpurpose handpiece1 ring handpiece GB761SU2 ring handpiece GB762SU3 ring handpiece GB763SUXL 1 handpiece GB764SUXL 2 handpiece GB765SUXL 3 handpiece GB766SU
microspeed uni high speed motor GD676
10
High speed – Hi-Line XS
GB740R Hi-Line XS craniotome, tobe used with dura guards, drill-depth guard and holding sleeveGB741R-GB748R (suitable spraynozzle GB767SU)
GB741R Hi-Line XS dura guard, 1ring code, to be used with cranio-tome burrs GE420R, GE420SU,GE429SU
GB742R Hi-Line XS dura guard, 2ring code, to be used with cranio-tome burrs GE520R, GE520SU,GE529SU
GB743R Hi-Line XS dura guard, 3ring code, to be used with cranio-tome burrs GE620R, GE620SU,GE629SU
GB746R Hi-Line XS dura guard,steerable, 1 ring code, to be usedwith craniotome burr GE420R,GE420SU, GE429SU
GB747R Hi-Line XS dura guard,steerable, 2 ring code, to be usedwith craniotome burr GE520R,GE520SU, GE529SU
GB748R Hi-Line XS dura guardsteerable, 3 ring code, to be usedwith craniotome burr GE620R,GE620SU, GE629SU
GB744R Hi-Line XS drill depthguard, for craniotome and multi-purpose handpiece GB740R, drilldepth from 2-8 mm adjustable
GB745R Hi-Line XS holding sleeve,for craniotome and multipurposehandpiece GB740R
11
~ 40 mm
~ 70 mm
High speed – Hi-Line XS
~ 130 mm
~ 170 mm
~ 220 mm
~ 100 mm
GB751R Hi-Line XS handpiece,straight, 1 ring code (suitablespray nozzle GB761SU)
GB752R Hi-Line XS handpiece,straight, 2 ring code (suitablespray nozzle GB762SU)
GB753R Hi-Line XS handpiece,straight, 3 ring code (suitablespray nozzle GB763SU)
GB756R Hi-Line XS handpiece,angled, 1 ring code(suitable spray nozzle GB761SU)
GB757R Hi-Line XS handpiece,angled, 2 ring code(suitable spray nozzle GB762SU)
GB758R Hi-Line XS handpiece,angled, 3 ring code(suitable spray nozzle GB763SU)
GB771R Hi-Line XS handpiece,angled, extra long, XL 1, 1 boldring code (suitable spray nozzleGB764SU)
GB772R Hi-Line XS handpiece,angled, extra long, XL 2, 2 boldring code (suitable spray nozzleGB765SU)
GB773R Hi-Line XS handpiece,angled, extra long, XL 3, 3 boldring code (suitable spray nozzleGB766SU)
~ 100 mm
~ 40 mm
~ 70 mm
12
Highspeed tools
GB740R
GB751R GB756R
Ø 1.0 Ø 1.4 Ø 1.8 Ø 2.3 Ø 2.7 Ø 3.1 Ø 4.0 Ø 5.0 Ø 6.0GE401R GE402R GE403R GE404R GE405R GE406R GE407R GE408R GE409R
Rosen burrs
GE420R GE429SUGB741R GB746R
Ø 1.0 Ø 1.1 Ø 1.2 Ø 1.5GE390R GE391R GE389R GE395R
Twist drills
GB744R
GE520R GE529SUGB742R GB747R
GE620R GE629SU
Craniotome cuttersspiral straight
GB743R GB748R
Diamond burrs coarse
Ø 5.0 Ø 6.0GE396R GE397R
Twin-Cutburrs
GB745RØ 1.0GE392R
Pin cutter
2 – 8 mm
Drill depth guard
appr
ox. 4
0 m
m
appr
ox. 4
0 m
m
Twist drills Diamond disc
Ø 3.1GE435TC-SU
Neuro cutterRosen burrsTungsten carbide
Ø 1.8 Ø 2.3 Ø 3.1GE431R GE434R GE435R
Neuro cutters
Ø 2.3 Ø 3.1 Ø 4.5 Ø 6.0GE424R GE425R GE426R GE427R
Diamond burrscoarse extra coarse
Craniotome cuttersspiral straight
Craniotome cuttersspiral straight
Holdingsleeve
Ø 3.1 Ø 5.0 Ø 6.0GE394R GE398R GE399R
Ø 1.5 Ø 2.0GE432R GE433R
Ø 3.1 Ø 4.0 Ø 5.0GE406TC-SU GE407TC-SU GE408TC-SU
Ø 22GE430SU
Ø 1.0 Ø 1.4 Ø 1.8 Ø 2.3 Ø 2.7 Ø 3.1 Ø 4.0 Ø 5.0 Ø 6.0GE411R GE412R GE413R GE414R GE415R GE416R GE417R GE418R GE419R
Diamond burrs
2-8
mm
Ø 6.0GE437R
Acorn burr
microspeed uni –for neuro, neurotology and spine
Acornburr
Cone burrsBarrel burrstandard
GB752R GB757R
Ø 4.0 Ø 5.0 Ø 6.0GE548R GE549R GE550R
Barrel burrssoft cut
Ø 1.0 Ø 1.4 Ø 1.8 Ø 2.3 Ø 2.7 Ø 3.1 Ø 4.0 Ø 5.0 Ø 6.0GE501R GE502R GE503R GE504R GE505R GE506R GE507R GE508R GE509R
Rosen burrs
appr
ox. 7
0 m
m
appr
ox. 7
0 m
m
Tungsten carbide
Ø 2.35GE528SU
Rosen burrsSied rasp burr
Ø 3.1GE535TC-SU
Neuro cutter
Ø 4.0 Ø 6.0GE544R GE546R
Ø 4.0 Ø 5.0GE507TC-SU GE508TC-SU
Ø 1.0 Ø 1.4 Ø 1.8 Ø 2.3 Ø 2.7 Ø 3.1 Ø 4.0 Ø 5.0 Ø 6.0GE511R GE512R GE513R GE514R GE515R GE516R GE517R GE518R GE519R
Diamond burrs
Diamond burrscoarse extra coarse
Ø 2.3 Ø 3.1 Ø 4.5 Ø 6.0GE524R GE525R GE526R GE527R
Neuro cutters
Ø 1.8 Ø 2.3 Ø 3.1 Ø 3.1GE531R GE534R GE535R GE555R
Ø 4.0 Ø 6.0GE540R GE542R
Ø 6.0GE546R
Ø 1.5 Ø 2.0GE532R GE533R
Twist drills
Ø 3.1 Ø 3.1GE554R GE555R
diamond coarse
Ø 1.0GE521R
Pin cutter
Ø 1.4 Ø 1.4GE522R GE523R
Lindemann
12 m
m
Diamond disc
Ø 22GE530SU
Reverse taperburr
Ø 4.0GE539R
12 m
m
13
14
Highspeed tools
GB753R GB758R
Ø 1.8 Ø 2.3 Ø 2.7 Ø 3.1 Ø 4.0 Ø 5.0 Ø 6.0GE603R GE604R GE605R GE606R GE607R GE608R GE609R
Rosen burrs
ø 4.0 Ø 6.0GE644R GE646R
Barrel burrsstandard
Ø 4.0 Ø 5.0 Ø 6.0 Ø 4.0GE648R GE649R GE650R GE645R
Barrel burrssoft cut
appr
ox. 1
00 m
m
appr
ox. 1
00 m
m
Ø 1.8 Ø 2.3 Ø 2.7 Ø 3.1 Ø 4.0 Ø 5.0 Ø 6.0GE613R GE614R GE615R GE616R GE617R GE618R GE619R
Diamond burrs
Ø 2.3 Ø 3.1 Ø 4.5 Ø 6.0GE625R GE625R GE626R GE627R
Diamond burrscoarse extra coarse
Ø 3.1 Ø 3.1GE654R GE655R
Neuro cuttersdiamond coarse
Ø 1.8 Ø 2.3 Ø 3.1 Ø 3.1GE631R GE634R GE635R GE653R
Neuro cutters
Tungsten carbide
Ø 2.35GE628SU
Rosen burrsSied rasp burr
Ø 3.1GE635TC-SU
Neuro cutter
Ø 4.0 Ø 5.0GE607TC-SU GE608TC-SU
Reverse taperburr
Ø 4.0GE639R
microspeed uni –for neuro, neurotology and spine
Twist drill
GB771R
GB772R
GB773R
Neuro cutter
Ø 4.0 Ø 5.0 Ø 6.0GE711R GE729R GE712R
Barrel burrssoft cut
Rosen burrs
Ø 3.1 Ø 4.5 Ø 6.0GE283SU GE286SU GE284SU
Diamond burrs
Ø 3.1GE288SU
Neuro cutter
Ø 4.0GE285SU
Barrel burrsoft cut
Rosen burrs Diamond burrs
Ø 3.1GE298SU
Neuro cutter
Ø 4.0GE295SU
Barrel burrssoft cut
appr
ox. 1
30 m
map
prox
. 170
mm
appr
ox. 2
20 m
m
XLI
XLII
XLI
XLII
XLIII
XLIII
Ø 3.1 Ø 4.5 Ø 6.0GE290SU GE292SU GE291SU
Ø 3.1 Ø 4.5 Ø 6.0GE293SU GE296SU GE294SU
Ø 3.1 Ø 4.5 Ø 6.0GE280SU GE282SU GE281SU
Ø 2.3 Ø 3.1 Ø 4.0 Ø 5.0 Ø 6.0GE704R GE706R GE707R GE708R GE709R
Rosen burrs
Ø 2.3 Ø 3.1 Ø 4.0 Ø 5.0 Ø 6.0GE714R GE716R GE717R GE718R GE719R
Diamond burrs
Ø 1.5GE700SU
Ø 3.1GE702R
15
16
Extremely short design through inte-gration of the motor in the handpiece!The short design and the proximity of the grip surface to the skull ensurethe best possible control via the motor during the skull perforationPowerful torqueConstant power through special motor actuation
Absence of rotating parts ensures safe operationSpeed range: 800-1.200 rpmAll common safety perforators withHudson shanks can be usedCan be combined with motor cableswith hand control or with foot controlpedals
microspeed uni perforator driver GD685
microspeed uni –for neuro, neurotology and spine
The high speed system with low speedvalue added
The range of applications for the microspeed unisystem extends beyond advanced high speed burring. Complete your system, for example withthe new perforator driver, the universal drill handpieces or the soft-tissue sparing micro-saws.
new
Low speed motor for all microsurgical sawing and drilling operationsSpeed range: 1.000 - 30.000 rpmCan be combined with motor cables with hand control or with foot control pedalsWide choice of micro-Line handpieces availableConstant power through special motor actuationAcceleration and stopping characteristics can be adjusted to individual requirements
microspeed uni low speed motor GD678
Low speed – micro-Line
17
~ 15 mm
GB129 micro-Line sagittal saw
GB130R micro-Line reciprocatingsaw
GD305 micro-Line reciprocatingsaw, incl. saw blade GD320R
GD307 micro-Line sagittal saw
GD450M micro-Line handpiece 1:1,for 70 mm burrs, coding: 1 blue ring
GD451M micro-Line handpiece 1:1, for 95 mm burrs, coding: 1 blue ring
GD455M micro-Line handpiece1:2, for 70 mm burrs, coding: 1 red ring
GD456M micro-Line handpiece1:2, for 95 mm burrs, coding: 1 red ring
GD457M micro-Line handpiece1:2, for 125 mm burrs, coding: 1 red ring
GB111 micro-Line handpiece 4:1, coding: 1 green ring
GB119 micro-Line angle piece head2:1, coding: 1 green dot, for dentalshank
GB300R Cranial perforator withHudson shank, ø 6 /9 mm
GB302R Cranial perforator withHudson shank, ø 9 /12 mm
GB304R Cranial perforator withHudson shank, ø 12/15 mm
ca. 45 mm
ca. 15 mm
ca. 45 mm
ca. 75 mm
18
For information on the respectivetools, please refer to our Burrs &Blades catalogue O17599.
microspeed uni – for small bone surgery and arthroscopy
Ergonomic, lightweight design meetsendless power
These two low speed motors, with 16.000 rpmare ideal for the requirements of small bone surgery. Combine these motors with a wide choice of mini-Line handpieces. Sawing, drilling,burring, wiring - the mini-Line has it all!
microspeed uni pistol GD684
Low speed pistol for arthroscopy andsmall bone surgery Compatible with all mini-Line hand-piecesLightweight and ergonomic shape for fatigue-free and precise operating
Oscillation- and tapping mode for a safe and accurate preparation of screwholes - primarily in tight approaches in small traumaAcceleration and stopping characte -ristics can be adjusted to individual requirements
microspeed uni mini motor GD674
Pencil-shaped microspeed uni motor for small bone surgeryCompatible with all mini-Line hand piecesCan be operated either with the motor cable with hand control GD673 or with the motor cable for foot control GD672Acceleration and stopping characteris tics can be adjusted to individual requirements
Low speed – mini-Line
19
GB376R mini-Line burr attach-ment, 1:2, for tools with 2.35 mmshank
GB382R mini-Line drill attachment,16:1, for tools with AO shank
GB383R mini-Line drill attachment,16:1, Jacobs chuck Ø 0 - 4.0 mm
GB377R mini-Line drill attachment,36:1, Jacobs chuck Ø 0 - 6.5 mm
GB389R mini-Line drill attachment,36:1, for tools with hexagonalshank
GB373R mini-Line angled drill attachment, 8:1, for tools withdental shank
GB374R mini-Line angled K-wirechuck, 17:1, Ø 0.6 - 1.6 mm, for use with microspeed uni mini motor GD674
GB398R mini-Line K-wire chuck16:1, Ø 0.6 - 2.5 mm, for use withmicrospeed uni pistol GD684
GB390R mini-Line sagittal saw attachment
GB391R mini-Line reciprocatingsaw attachment
GB392R mini-Line transversal sawattachment
20
microspeed uni shaver handpiece with hand control GD681
The ergonomic two button control de-sign allows easy operation of oscillation,right and left mode with fingertipsCompact, lightweight (275 g) construc-tion with ergonomic design for fatigue-free and precise operating Automatic tip recognitionSpeed range shaver tips: 400 - 5.000 rpm
Speed range reamer tips: 1.000 - 8.000 rpmOscillation frequency: 0.3 - 2.0 secondsAcceleration and stopping characte -ristics can be adjusted to individual requirementsSuction power easily adjustable overthe control lever on the handpiece
microspeed uni – for small bone surgery and arthroscopy
Arthroscopic procedures require reliable, ergonomically sophisticatedshaver handpieces
The microspeed uni shaver handpieces excel inparticular thanks to their compact, lightweightdesign. Even extremely long operations can thusbe performed comfortably and without fatigue.Modern production technologies and the use oftop-grade materials are characteristic of thesefirst-class quality products. Combined with our extensive range of shaver blades and burrs, the microspeed uni system isone of the most sophisticated and advancedshaver systems available.
microspeed uni shaver handpiece GD682
Compact, lightweight (275 g) construc-tion with ergonomic design for fatigue-free and precise operating Automatic tip recognitionSpeed range shaver tips: 400 - 5.000 1/minSpeed range reamer tips: 1.000 - 8.000 1/min
Oscillation frequency: 0.3 – 2.0 secondsAcceleration and stopping charac te- ristics can be adjusted to individual requirementsSuction power easily adjustable over the control lever on the handpiece
21
22
microspeed uni – for arthroscopyShaver blades and burrs for standard and small joint arthroscopy
Full Radius Resector
cutting right and left; toothed inner and outer blade; for all indications, e.g. meniscectomy, synovectomy, chondromalacia
cutting right and left; for all indications, e.g. meniscectomy, syno vec tomy, chondro ma la cia
3.03.74.55.5
GB955SUGB965SUGB975SUGB985SU
3.03.74.55.54.54.5
GB956SUGB966SUGB976SUGB986SUGB996SUGB997SU
3.74.55.5
GB967SUGB977SUGB987SU
cutting right and left; inner bladewith two toothed windows for rapid ablation, for all indications,e.g. meniscectomy, synovectomy,chondromalacia
4.55.5
GB959SUGB969SU
cutting right and left; special cuttingedges design for effective tissue and bo-ne resection; inner blade with two too-thed windows ensures rapid ablation,for all indications, e.g. synovectomy,chondromalacia, arthroscopic abrasion
cutting right and left; smoothingof cartilage layer defects and me-niscal tissue
3.04.5
GB953SUGB973SU
3.03.74.54.5 4.5
GB951SUGB961SUGB971SUGB992SUGB993SU
cutting right and left; toothed innerand outer blade; meniscectomy andjoint debridement
4.5 GB972SU
4.5 GB979SU cutting, right and left; for joint debridement, final smoothing ofsoft tissue or cartilage defects
Full Radius Resector Toothed
Full Radius Resector Twin Cut
Allrounder
Cartilage Trimmer
Bilateral Cutter
cutting right and left; meniscecto-my especially in the posterior horn region
Lateral Cutter Toothed
Whisker
newnew
new
Ø in mm Article no. DiscriptionTop quality for top performance and safety
The Aesculap shaverblades and burrs provide outstandingperformance in bone and tissue resection. The applicationof superior materials and a revolutionary manufacturingprocess produce precision cutting edges which lead toaggressive and efficient cutting motion with reducedclogging effect. In addition all Aesculap shaverblades andburrs feature a unique safety concept which avoids metalbreakage in the joint when the blades get overstressed –safety for you and your patient!
Ø in mm Article no. Discription
23
Shaverblades and burrs for hip arthroscopy
Round Surface Burr
6.0 GB990SU
Conical Surface Burr
cutting to the right; aggressive re-amer for arthroplastic abrasion,notch plasty etc.
3.76.0
GB981SUGB991SU
Round Burr
cutting to the right; reamer for arthroplastic abrasion, cartilagetrimming, removal of osteo phytes
GB958SUGB968SUGB978SUGB988SU
Acromion Burr
cutting to the right; special reamer for acromion plasty
6.0 GB989SU
cutting to the right; reamer for arthroplastic abrasion, notch plasty etc.
new
3.03.74.56.0
Cox Round Surface Burr
6.0 GB838SU
Cox Round Burr
cutting to the right; reamer for boneresection, e.g. femoroacetabular im-pingement, resection of osteophytes
6.0 GB839SU
Cox Full Radius Resector Toothed
angled 20°; canulated; to be usedfor synovectomies, cartilage defects,lesions of lig. teres and debridementof labral tears in the central com-partment
GB835SUGB836SU
Cox Full Radius Resector Twin-Cut
canulated; cutting right and left;inner blade with two toothed win-dows for rapid ablation of jointcapsule and synovialis in the peri-pheral compartment
5.5 GB837SU
cutting to the right; reamer for boneresection, e.g. femoroacetabular im-pingement, resection of osteophytes
4.54.5
Ellipsoid Resector
cutting right and left; cutting geometry specially suited for joint debridement and synovectomy
4.5 GB974SU
Guiding wire; nitinolcan be used with all Aesculap Coxshaverblades and burrs
1.2 GB827R
Cox shaverblades and burrs
For an easy and secure insertion all Aesculap hip arthroscopyshaverblades and burrs can be introduced via a flexible guidingwire. Not only the length is adapted to the particular require -ments of the hip joint also the stability of these shaverbladesand burrs is increased considerably.
newØ in mm Article no. Discription
Ø in mm Article no. Discription
24
microspeed uni –accessories
Other accessories can be found in our Aesculap Power Systems catalogue O22702.
GA411 Mobile stand for microspeed uni control unit; adjustable height
GA391SU Tubing set complete with adaptor for spray nozzle, fixation clips and short spike; for singleuse;
GA392SU Tubing set with Y-adaptercomplete with adaptor for spray nozzle,fixation clips and short spike; for singleuse;
25
microspeed uni –processing and maintenance
Maintenance with Sterilit
Sterilit allows optimal maintenance of your microspeed uni motor system.
GB600810mirco-line
GB600870microspeed uni XS
GB600830mini-line
GB600820microspeed uni, microLAN, miniLAN,Hi-Line, Hi-Line XS, HiLAN, HiLAN XS
50 mmThis symbol indicates the respectivetray height.
GB255R Eccos set for neurosurgery50 mm
comprising: QuantityJF212 1GB587R 1GB586R 1GB614R 1GB615R 1GB689R 1
GB254R Eccos set for small bone surgery50 mm
comprising: QuantityJF212 1GB579R 1 GB673R 1GB674R 2GB690R 3
Handpieces and motors shown in the illustrations are not included in deliveryof storage products.
GB600Sterilit Power Systems Oilspray
Safety Mechanical cleaning ensures consistentprocessing quality.
Simplicity For simple intraoperative handling, Eccosoffers clearly arranged storage solutionfor the machines throughout the entiresterile goods cycle.
SpeedEccos allows mechanical processing ofthe complete microspeed uni family.
Eccos
Reprocessing with EccosOn this page you will find Eccos standardtrays for the microspeed uni motor system. However, you can also use Eccos tocompose your individual storage system or extend our standard trays.
Ordering information
Shaver blades and burrsfor standard and small joint arthroscopy
Shaver blades and burrsfor hip arthroscopy
26
GB951SU Lateral cutter toothed, Ø 3.0 GB961SU Lateral cutter toothed, Ø 3.7 GB971SU Lateral cutter toothed, Ø 4.5GB992SU Lateral cutter toothed, Ø 4.5 concave curved GB993SU Lateral cutter toothed, Ø 4.5 convex curved GB972SU Bilateral cutter, Ø 4.5 GB953SU Cartilage trimmer, Ø 3.0 GB973SU Cartilage trimmer, Ø 4.5 GB974SU Ellipsoid resector, Ø 4.5 GB955SU Full radius resector, Ø 3.0GB965SU Full radius resector, Ø 3.7GB975SU Full radius resector, Ø 4.5GB985SU Full radius resector, Ø 5.5GB956SU Full radius resector toothed, Ø 3.0GB966SU Full radius resector toothed, Ø 3.7GB976SU Full radius resector toothed, Ø 4.5GB986SU Full radius resector toothed, Ø 5.5GB996SU Full radius resector toothed, Ø 4.5 concave curvedGB997SU Full radius resector toothed, Ø 4.5 convex curvedGB967SU Full radius resector twin cut, Ø 3.7GB977SU Full radius resector twin cut, Ø 4.5GB987SU Full radius resector twin cut, Ø 5.5GB959SU Allrounder, Ø 4.5GB969SU Allrounder, Ø 5.5GB979SU Whisker, Ø 4.5 GB958SU Round burr, Ø 3.0 GB968SU Round burr, Ø 3.7GB978SU Round burr, Ø 4.5 GB988SU Round burr, Ø 6.0 GB989SU Acromion burr, Ø 6.0 GB990SU Round surface burr, Ø 6.0 GB981SU Conical surface burr, Ø 3.7GB991SU Conical surface burr, Ø 6.0
GB835SU Cox Full Radius Resector toothed, Ø 4.5GB836SU Cox Full Radius Resector toothed, Ø 4.5GB837SU Cox Full Radius Resector Twin-Cut, Ø 5.5GB838SU Cox Conical Surface Burr, Ø 6.0GB839SU Cox Round Surface Burr, Ø 6.0GB827R Guiding wire; nitinol
Accessories
GA411 Mobile stand for microspeed uni, adjustable height
GD416M Mobile stand for Aesculap control unitsGA391SU Tubing set complete with adapter for spray nozzle
and punch, for single useGA392SU Tubing set with Y-adapter, complete
with adapter for spray nozzle and punch, for single use
TE780 Power cord for Europe; 1.5 mTE730 Power cord for Europe; 5 mTE735 Power cord for USA, Canada, Japan; 5 mTE734 Power cord for UK; 5 mGB254R Eccos set for small bone surgeryGB255R Eccos set for neurosurgeryGB689R Eccos fixation for GD672 and GD673GB578R Eccos fixation for GD674, GD676, GD678, GD679GB579R Eccos fixation for GD684GB580R Eccos fixation for GD681, GD682GB586R Eccos fixation for GD675GB587R Eccos fixation for GD685
micro-LineGD450M micro-Line handpiece 1:1, for 70 mm burr,
coding: 1 blue ringGD451M micro-Line handpiece 1:1, for 95 mm burr,
coding: 1 blue ringGD455M micro-Line handpiece 1:2, for 70 mm burr,
coding: 1 red ringGD456M micro-Line handpiece 1:2, for 95 mm burr,
coding: 1 red ringGD457M micro-Line handpiece 1:2, for 125 mm burr,
coding: 1 red ring
Motors
GD676 microspeed uni Hi 150 motorGD674 microspeed uni mini 100 motorGD675 microspeed uni XS high speed motorGD678 microspeed uni micro 150 motor GD681 microspeed uni shaver handpiece with hand
controlGD682 microspeed uni shaver handpieceGD684 microspeeduni mini pistol, 2.5 mm cannulatedGD685 microspeed uni perforator driver
Ordering information
27
Control unit (power cord to be ordered separately)
GD670 Control unit microspeed uni
Motor cablesGD672 microspeed uni motor cableGD673 microspeed uni motor cable with hand control
Foot control switchesGD668 microspeed uni foot control switch, one pedalGD671 microspeed uni foot control switch, two pedals
Handpieces (suitable spray nozzle to be ordered separately)
Hi-Line XSGB751R Hi-Line XS handpiece straight, 1 ringGB752R Hi-Line XS handpiece straight, 2 ringGB753R Hi-Line XS handpiece straight, 3 ringGB756R Hi-Line XS handpiece angled, 1 ringGB757R Hi-Line XS handpiece angled, 2 ringGB758R Hi-Line XS handpiece angled, 3 ringGB771R Hi-Line XS handpiece angled, 1 bold ringGB772R Hi-Line XS handpiece angled, 2 bold ringGB773R Hi-Line XS handpiece angled, 3 bold ringGB740R Hi-Line XS craniotomeGB741R Hi-Line XS dura guard, 1 ringGB742R Hi-Line XS dura guard, 2 ringGB743R Hi-Line XS dura guard, 3 ringGB746R Hi-Line XS dura guard, steerable, 1 ringGB747R Hi-Line XS dura guard, steerable, 2 ringGB748R Hi-Line XS dura guard, steerable, 3 ringGB744R Hi-Line XS drill depth guardGB745R Hi-Line XS holding sleeve
mini-LineGB373R mini-Line angled drill attachm. for tools with
dental shankGB374R mini-Line K-wire chuck, angledGB376R mini-Line burr attachment, for 2.35 mm shankGB382R mini-Line drill attachment, for tools with AO
shankGB383R mini-Line drill attachment, Jacobs chuck, smallGB377R mini-Line drill attachment, Jacobs chuck, largeGB398R mini-Line K-wire chuck for GD684GB389R mini-Line drill attachment, for tools with
hexagonal shankGB390R mini-Line sagittal saw attachmentGB391R mini-Line reciprocating saw attachmentGB392R mini-Line transversal saw attachment
GB111 micro-Line handpiece 4:1, coding: 1 green ringGB119 Contra angle head 2:1, coding: 1 green dot, for
tools with dental shankGD305 micro-Line reciprocating saw incl. blade GD320R GD307 micro-Line sagittal sawGB129 micro-Line sagittal sawGB130R micro-Line reciprocating sawGB300R Cranial perforator with Hudson shank, Ø 6 / 9 mmGB302R Cranial perforator with Hudson shank, Ø 9 / 12 mmGB304R Cranial perforator with Hudson shank, Ø 12 / 15 mm
Aesculap AG | Am Aesculap-Platz | 78532 Tuttlingen | GermanyPhone +49 (0) 74 61 95-0 | Fax +49 (0) 74 61 95-26 00 | www.aesculap.com
Aesculap – a B. Braun company
All rights reserved. Technical alterations arepossible. This leaflet may be used in no waywhatsoever other than for the offering, buyingand selling of our products. No part may be copied or reproduced in anyform. In the case of misuse we retain the rightto recall our catalogues and pricelists and totake legal action.
The main product mark ’Aesculap’ is a regis -tered mark of Aesculap AG.
Brochure No. O28302 0510/1.5/4