gas systems: regulators, compressors, cylinders 2017 gas...5460 forged y, (2) 1/4 fpt x 1/4 mpt...
TRANSCRIPT
Gas
Sys
tem
s: R
egul
ator
s, C
ompr
esso
rs, C
ylin
ders
PageD-1
100 Gary Avenue, Suite CRoselle, IL 60172Local: 847-524-1707Fax: 847-524-1710
lancermidwest.comcall: 888-674-5719email: [email protected]
1. RegulatorsandAccessories2. CO2CylindersandAccessories3. CO2Detectors/Alarms4. AirCompressorandParts
Part Number Type of Regulator Gauge Mount Additional InfoT5741PMHPBK Primary,1Px1P 2000x160 Tank 1/4"MFLwithcheckvalve,blackcapT5741PMHPBK-01 Primary,1Px1P 2000x160 Tank 1/4"barb,blackcapT5741PMHPBKGP Primary,1Px1P 2000x160 Tank 1/4"MFLwithcheckvalve,blackcap,gaugeguardT5741PMHPBK-01 Primary,1Px1P 2000x160 Tank 1/4"barbshutoffwithcheckvalveT5741WMHP Primary,1Px1P 2000x160 Wall 1/4"MFLwithcheckvalve,redcapT5741WMHP-3 Primary,1Px1P 2000x160 Wall With3'highpressurehoseT5741WMHP-6 Primary,1Px1P 2000x160 Wall With6'highpressurehoseT5745HPBK Primary,1Px5P 2000x160 Tank (5)1/4"MFLwcheckvalve,verticalmanifold,blackcapT5752HP-02 Primary,2Px2P 2000x160 Tank 1/4"MFLwithcheckvalve,redcapT5752WMHP-06-3 Primary,2Px2P 2000x160 Wall With6'and3'highpressurehosesT5740HP160BK Primarybody,blackcap 2000x160 Tank Regulatorbodyassyfor160#gauge,nofittings5741PMHPN Nitrogen,1Px1P 3000x160 Tank Nitrogen,1/4"MFLwithcheckvalve,blackbonnetT7430K3 TwinCylinder 3000x160 Wall Changeovervalve,two3'highpressurehosesT7430K6 TwinCylinder 3000x160 Wall Changeovervalve,two6'highpressurehosesT8861-6 Primary&secondary,2Px2P 2000x100x200 Wall With6'highpressurehose,red3741 Primary,1Pressurex1Product 2000x160 Tank 1/4"MFLwithcheckvalveoutlet3735 Primary,1Px5P 2000x160 Tank Manifold,horizontal,1/4"MFLwithcheckvalve3752 Primary,2Px2P 2000x160x160 Tank 1/4"MFLwithcheckvalveoutlet3753 Primary,2Px3P 2000x160x160 Tank 1/4"MFLwithcheckvalveoutlet3754 Primary,2Px4P 2000x160x160 Tank (2+2)1/4"MFLwithcheckvalveoutlet
High performance T5700 Series high pressure (HP) tank or wall mounting regulators have an interlocking seat and self-relieving diaphragm. Poly bonnet and cap will not chip, break or fade. UL approved per UL252 class IV rating for CO2 and provides up to 2 SCFM additional flow. Maximum inlet pressure: 3300 psi.
Economy 3000 Series regulators have a safety check valve and self-relieving diaphragm. UL approved per UL252 class IV rating for CO2. Maximum inlet pressure: 3000 psi.
Standard operating range is 0-130 psi, but can be preset to other pressures to meet customer requirements. Temperature range: -40˚ F to +200˚ F. Ports are 1/4" FPT. HP regulators are LH thread.
HP hoses are available in 3, 6 and 9 foot lengths. Inlet is a CO2 swivel nut, and outlet is a 1/4" MFL fitting.
T5741PMHP T5741PMHPB T5741PMHPBKPrimaryHighPressureCO2Regulators
T7430K-6
T8861-6 3734
3741 37523735
See our Bar Equipment Section Hfor beer regulators and beer fittings
Gas
Sys
tem
s: R
egul
ator
s, C
ompr
esso
rs, C
ylin
ders
PageD-2 Continuingproductimprovementsmaynecessitatechangeswithoutnotice.©2017Lancer
100 Gary Avenue, Suite CRoselle, IL 60172Local: 847-524-1707Fax: 847-524-1710
lancermidwest.comcall: 888-674-5719email: [email protected]
SecondaryLowPressureCO2Regulators
Part Number Type of Regulator or Manifold Gauge Mount Additional InfoT5261SND Secondary,1Px1P 30 Wall 1/4"MFLoutletwithcheck,goldcapT5272SN Secondary,2Px2P 100 Wall 1/4"MFLoutletwithcheck,goldcapT5261SN-03 Secondary,1Px1P 100 Wall 1/4barbinletandoutletT5261SN75 Secondary,1Px1P 160 Wall PepsiIntellicarb(presetnon-adjustablepsi)T5260SN100 Secondary,body,goldcap N/A N/A Regulatorbodyassyfor100#gaugeT5260SN100BK Secondary,body,blackcap N/A N/A Regulatorbodyassyfor100#gaugeT5364SN Secondary,1Px4P 100 Wall MFLbartypeoutletwithcheckT5365SN Secondary,1Px5P 100 Wall MFLbartypeoutletwithcheckT5366SN Secondary,1Px6P 100 Wall MFLbartypeoutletwithcheckT5368SN Secondary,1Px8P 100 Wall MFLbartypeoutletwithcheckT5375SN Secondary,2Px5P 100x30 Wall MFLbartypeoutletwithcheckT5376SN Secondary,2Px6P 100x30 Wall MFLbartypeoutletwithcheckT6365SN Secondary,1Px5P 100 Wall MFLmanifoldwithshutoffT6366SN Secondary,1Px6P 100 Wall MFLmanifoldwithshutoffT6368SN Secondary,1Px8P 100 Wall MFLmanifoldwithshutoff31-0501-16 Secondary,1Px1P 75 Wall ForIntellicarbfountaindispenser,withgauge31-0500-16 Secondary,1Px1P 75 Wall ForIntellicarbfountaindispenser,withoutgauge3734-100 Secondary,1Px4P 100 Pre-mix,bartype
The T5200SN Series is a secondary reducing valve designed to maximize the performance of fountain dispensers. Interlocking seat and self-relieving diaphragm, and non-removable adjustment screws are standard. Poly bonnet and cap will not chip, break or fade. LP regulators are RH thread unless otherwise specified.
UL approved per UL252 class IV rating for CO2. Standard operating range is 0-100 psi, but can be preset to other pressures to meet customer requirements. Maximum inlet pressure: 3000 psi. Temperature range: -40˚ F to +200˚ F. Inlet and outlet ports are 1/4" MFL.
T5261SN75 31-0501-16T5261SN
T5261SND T5365SN T5366SN T5376SN
T6366SN
T6368SN
RegulatorRepairKits
Part Number Description3740-15 Regulatorrepairkit,3000Series740-15 Regulatorrepairkit,self-centering,700and1600Series(priorto10/2006)7740-15 Regulatorrepairkit:77003C,77006T,44017Q7740-15N Nitrogenregulatorrepairkit Regulatorrepairkit
Gas
Sys
tem
s: R
egul
ator
s, C
ompr
esso
rs, C
ylin
ders
PageD-3
100 Gary Avenue, Suite CRoselle, IL 60172Local: 847-524-1707Fax: 847-524-1710
lancermidwest.comcall: 888-674-5719email: [email protected]
RegulatorBarManifoldsforBIBandFIGALDispensing
Part Number Type of Manifold Mount Additional Info6444* Manifold,4Product Regulator Manifoldwithshutoff6446* Manifold,6P Regulator Manifoldwithshutoff6448* Manifold,8P Regulator Manifoldwithshutoff2554* Manifold,4P Wall 90˚Manifoldwithindividualshutoffs2546* Manifold,6P Wall 90˚Manifoldwithindividualshutoffs2548* Manifold,8P Wall 90˚Manifoldwithindividualshutoffs5364-1A Manifold,4P Regulator Manifold,standard1/4"SAE(M)withcheckvalve5365-1A Manifold,5P Regulator Manifold,standard1/4"SAE(M)withcheckvalve394-K44 Manifold,4P RH1/4"MFLinlet,(4)1/4MFLair-cockoutlets395-K44 Manifold,5P RH1/4"MFLinlet,(5)1/4MFLair-cockoutlets396-K44 Manifold,6P RH1/4"MFLinlet,(6)1/4MFLair-cockoutlets397-K44 Manifold,7P RH1/4"MFLinlet,(7)1/4MFLair-cockoutlets398-K44 Manifold,8P RH1/4"MFLinlet,(8)1/4MFLair-cockoutlets399-K44 Manifold,9P RH1/4"MFLinlet,(9)1/4MFLair-cockoutlets399-KH-4 Manifold,9P 9-waybarbair-cockwithshutoff,1/4"
*AddsuffixCtopartnumberforbackflowchecks(6444C)
5364-1A 5365-1A25462554 2548
GovReg®installedonkegcoupler
Only12partscomparedto25plusofordinaryregulators
Part Number Description
G5150Secondaryregulator,dispensegoveforkegcouplers,pre-setto12psi,psiisadjustable
G5500Dispenseregulatortester/adjusterforG5200secondaryregulatorforkegcouplers
GovReg®
Takes the place of a traditional secondary regulator, based on proven medical technology for high precision and durability.• Greatly reduces install time, effort, and expense. Set it and forget it!• Leak test under water. Boil for sterilization• Limited number of components to increase durability• Impervious to corrosion• Gas compatibility: CO2, Argon, O2, N20, N2, gas blends• Prevents backflow of beer from keg into gas line• Output pressure range 4-55 psi, input pressure range 20-150 psi
Applications• Short or long draw draught beer systems• Kegs in series: events/high volume dispense• Wine On Tap, kombucha, nitro coffee, mixed cocktails• Soda/soft drink fountain dispense systems
G5150
G5500tester/adjuster
Gas
Sys
tem
s: R
egul
ator
s, C
ompr
esso
rs, C
ylin
ders
PageD-4 Continuingproductimprovementsmaynecessitatechangeswithoutnotice.©2017Lancer
100 Gary Avenue, Suite CRoselle, IL 60172Local: 847-524-1707Fax: 847-524-1710
lancermidwest.comcall: 888-674-5719email: [email protected]
740-12N
PT1000
RegulatorPartsandAccessories
HPhoseassembly
770-6T
7700-3C
600GPS03S07100
Gauges
440-18
08-1080-00
RK1000-0051
63
63NY
440-4PN
43-0006-00
740-19
440-12
440-17Q 440-17R
1690-3S 2701-BCTRHB-32
740-12
5232B
MoreCarbonationTestersandpartsare located in Water Systems on page E-9.
5460
C296
C295
15-0017-60
Part Number Description7000-3A 3'Highpressurehoseassembly7000-6A 6'Highpressurehoseassembly7000-9A 9'Highpressurehoseassembly3740-2PA Bonnet,black,3000series7700-6T Replacementdiaphragmassembly,newstyle7700-3C Replacementseatassembly,newstyle600GPS Gaugebootprotector03S07100 C133GormangaugeprotectorRK1000-0051 Gaugeguard,singlebodyregulator440-4PN Guidenuttool63 FiberCO2washer63NY NylonCO2flarewasher20W1005H02L30# Gauge,30#PSIGRHthread20W1005H02L60# Gauge,60#PSIGRHthread20W1005H02L100# Gauge,100#PSIGRHthread20W1005H02L160# Gauge,160#PSIGRHthread20W1005H02L300# Gauge,300#PSIGRHthread6603-2000 Gauge,2000#PSIGLHthread5603 Gauge,3000#PSIGRHthread6603 Gauge,3000#PSIGLHthread440-18 Wrench,CO2regulator,Tapritezincbonnet440-19 Wrench,CO2regulator,Tapritepolybonnet22-0016 Wrench,CO2regulator,Lancer08-1080-00 Regulatormountingbracketforlouveredrack5201738506212 Lockwasherforregulatorbracket1690-3S Hexbolt43-0006-00 SSbracketforregulatormountingREGMT-24 Regulatormount,24",galvanizedsteelPT1000 CO2pressuretester2701-BCT BeercarbonationtesterwithprotectivecaseRBH-32 EconomyRefractometer440-12 BrassCO2inletnippleRHthread440-17Q Inletnipplequadring440-17R O-ringforCO2nipple740-12 CO2inletnipple,O-ringseal,lefthand740-12N Nitrogeninletnipple1/4"MPTlefthandthread740-13N Nitrogentanknut,malethread740-16 MPTplug,1/4"LHthread740-19 ReplacementCO2nutandnippleassy,LH5460 ForgedY,(2)1/4FPTx1/4MPT5232B Brasscap,1/4"SAE1000730 BrassCO2nut,CGA320JO-11N RegulatorfittingRHthreadC296 CO2tonitrogenadapterC295 NitrogentoCO2adapter15-0017-60 Regulatormountingpanel11"x8.5"galvanized15-0018-60 Regulatormountingpanel16"x8.5"galvanized15-0019-60 Regulatormountingpanel21"x8.5"galvanized
22-0016
Gas
Sys
tem
s: R
egul
ator
s, C
ompr
esso
rs, C
ylin
ders
PageD-5
100 Gary Avenue, Suite CRoselle, IL 60172Local: 847-524-1707Fax: 847-524-1710
lancermidwest.comcall: 888-674-5719email: [email protected]
Part Number Description6600 ShutoffoutletforBIB,nocheck,1/4"SAEmale6600C ShutoffoutletforBIB,withcheck,1/4"SAEmaleCO882015 Barbedshutoff,1/4"CO882020 Barbedshutoff,1/4”MPTx5/16”barbCO882029 Barbedshutoff,5/16"CO882028 Barbedshutoffwithcheckvalve,5/16"8100B Brassshutoff,1/4MPTx5/16barb,wcheckvalve8101B Brassshutoff,1/4MPTx5/16barb,nocheckvalve8120B Brassshutoff,1/4MPTx1/4barb,wcheckvalve8121B Brassshutoff,1/4MPTx1/4barb,nocheckvalve8160B Brassshutoff,1/4MPTx3/8barb,wcheckvalve8161B Brassshutoff,1/4MPTx3/8barb,nocheckvalve5153B Inletfittingforsecondaryreg.,1/4"MPTx1/4"SAE5436 Outletfittingwithcheckvalve,S1/4"AEmale5436H Outletfittingwithcheckvalve,1/4"hosebarb617BN Brass5/16"barbx1/4"MPTfitting431-P44 Fitting,1/4"MFL,1/4"MPT,ballcheckwadaptor618L Brassnipple1/4RHMPTx1/4LHMPT08-0564 1/4"gashoseblueselfstoreST-B78C12-12F 78seriescouplerwithwing-nutforbulkCO2
CO2RS-CCornelius160lbCO2tankmountregulator,changeovervalve,bulksystemgaugewithmanifoldcheckvalveandshutoff
RegulatorPartsandAccessories
CO2TankOutsideStorageCabinet
Part Number Description20604733 CO2tankoutsidestoragecabinet
Cabinet provides tank security and improved appearance. Accommodates all sizes of Chart Beverage outdoor tanks.
Features: • 60% open surface for cross ventilation• 2 hinged lockable doors• Port accommodates 2" conduit connections• Tabs for bolting unit to concrete• Removable roof panel protects against harsh weather • Rustproof aluminum construction• Powder coated gray primer is ready to paint• Options: fill valve to fill box connection, vent kit to direct
discharge to the floor
Cabinet comes un-assembled in an easy-to-ship package preventing damage in transit. Can be assembled on site in about an hour using screwdriver and small adjustable wrench. 32.6"W x 32.6"D x 76.5"H
Tankcabinet
66006600C
5436H617BN
5153B
5436
ST-B78C12-12F
CO2RS-CBulkCO2reservekit08-0564
CO882015CO882020CO882028
8100B8101B8120B8121B8160B8161B
CO882029
Gas
Sys
tem
s: R
egul
ator
s, C
ompr
esso
rs, C
ylin
ders
PageD-6 Continuingproductimprovementsmaynecessitatechangeswithoutnotice.©2017Lancer
100 Gary Avenue, Suite CRoselle, IL 60172Local: 847-524-1707Fax: 847-524-1710
lancermidwest.comcall: 888-674-5719email: [email protected]
Part Number DescriptionB5 5lb./2.3kgs.cylinder,CatalinaB10 10lb./4.5kgs.cylinder,CatalinaB20 20lb./9.1kgs.cylinder,CatalinaB35 35lb./15.9kgs.cylinder,CatalinaB50 50lb./22.7kgs.cylinder,CatalinaCGA-320 Replacementvalve
CO2Cylinders
Catalina seamless aluminum alloy compressed gas cylinders are manufactured in accordance with U.S. DOT 3AL and TC 3ALM requirements and are stamped with required U.S. Department of Transportation (DOT) and Transport Canada (TC) Markings. Every cylinder is inspected and tested by a DOT and TC authorized independent inspection agency. Service pressure: 1800 psi / 124 bar.
CO2CylinderPartsandAccessories
Part Number DescriptionH1BK Carryinghandleblack,CatalinaH1RD Carryinghandlered,CatalinaH2BK Carryinghandleblack,LuxferSR1 Snapring,CatalinaSR2 Snapring,Luxfer22-0016 CO2wrench1421 Highpressurechangeovervalveassy,1/4"MFL7430 Highpressurechangeovervalveassy,1/4"MFL7431 CO2changeoverkit20020104 Manifold,3/8x1/4(4)20F05-103 Gascylinderbracket,triple,2"Hx4"Wx37"L20F05-102 Gascylinderbracket,double,2"Hx4"Wx24"L20F05-101 Gascylinderbracket,single,2"Hx4"Wx8"L
CGA-320replacementvalve
22-0016LuxfersnapringCarryinghandle Catalinasnapring
7431
20F05-101
20F05-102
20F05-103
Prevents off-tastes and aromas from spoiling soda and draft beer due to CO2 contaminants, such as bacteria, yeasts, molds, and particles from gas (CO2) streams, even in the presence of humidity and moisture.
CO2Purifier
BCT-2409-ATOPart Number DescriptionBCT-2409-ATO 2"x10"stainlesssteelhousingandCO2filterATO-9SS ReplacementcartridgeforBCT-2409-ATOBCT-2510-ATO 2"x10"nylonhousingandCO2filterATO-10P ReplacementcartridgeforBCT-2510-ATO BCT-2510-ATO
7430 1421
Gas
Sys
tem
s: R
egul
ator
s, C
ompr
esso
rs, C
ylin
ders
PageD-7
100 Gary Avenue, Suite CRoselle, IL 60172Local: 847-524-1707Fax: 847-524-1710
lancermidwest.comcall: 888-674-5719email: [email protected]
Infinity™AutoChangeover
The Infinity™ Auto Changeover senses a depleted cylinder and automatically switches to the reserve cylinder.
Features
• Priority Select™ feature allows service personnel to designate which cylinder is considered primary
• Installation is quick and simple
Benefits to Suppliers
• Eliminates emergency calls• Requires no location involvement• Increases customer loyalty• Optimizes route planning
Benefits to Customers
• Ensures a continuous supply of gas• Eliminates the need to change cylinders• Eliminates the need to call for service
Ordering Instructions
• Specify CGA connections
Note: 2-6 Cylinders may be connected in any configuration using standard pigtails. Hose assemblies are priced individually.
Dimensions:6”Wx4.6”Hx2”DGasService:InertInlet:1/4”NPT(2)Outlet:1/4”NPT(1)Safety:Self-resetting175psi
Infinity™AutoChangeover
Part # Description3563 InfinityAutoChangeoverHKCO-580-1 HoseassemblysinglenitrogencylinderCGA580HKCO-580-2 HoseassemblydualnitrogencylinderCGA580HKCO-580-3 HoseassemblytriplenitrogencylinderCGA580HKCO-320-1 HoseassemblysingleCO2cylinderCGA320HKCO-320-2 HoseassemblydualCO2cylinderCGA320HKCO-320-3 HoseassemblytripleCO2cylinderCGA320
Gas
Sys
tem
s: R
egul
ator
s, C
ompr
esso
rs, C
ylin
ders
PageD-8 Continuingproductimprovementsmaynecessitatechangeswithoutnotice.©2017Lancer
100 Gary Avenue, Suite CRoselle, IL 60172Local: 847-524-1707Fax: 847-524-1710
lancermidwest.comcall: 888-674-5719email: [email protected]
Trumix®GasBlenders
The Trumix® blending panel is a small wall-mounted unit that is easy to install, dependable, and requires no electricity, on-going maintenance or adjustment. It can be used with all sources of clean nitrogen and CO2 including high pressure cylinders, bulk tanks or separators.
TM-1 & TM-1HF are for single blend (one beer) long draw beer systems. TM-2 & TM-2HF are for systems that dispense more than one type of beer requiring two separate blends of CO2 and N2. TM-3 is for triple blends.
Inlet Pressures: 55-150 psi, however, panel can be set to match any conditions (standard 55 and 70 psi). Outlet pressures are adjustable from 0-60 psi. The maximum outlet pressure will always be 10 psi lower than the lowest inlet pressure. The panel can also be ordered with outlet pressure set to custom ranges.
MV tee and straight check valve fittings protect the blender from being filled with water when the blender is being using in conjunction with a carbonator. Trumix® blender warranty only covers water damage if a MV check valve fitting was installed.
The MV035 and MV039 inline leak detectors can easily determine if there is a leak and the size of the gas leak so you will know if it requires immediate attention or is hazardous to your employees.
The Bypass Leak Detector (BLIP) can tell you in seconds if your microbrewery has leaks and how big they are. One glance before you start using gas tells you whether you have a leak or not. As you repair leaks, it serves as your scorecard, letting you know how much of the problem is resolved and if all leaks are fixed. Even the smallest leak can cost hundreds of dollars per year.
LeakDetectors
TM-1 TM-3TM-2
TeewithcheckvalveRequiredforMcDantimwarranty
MV039MV035
MV020 MV022
Part Number DescriptionTM-1 Trumix®singlegasblender15kegs/hourTM-1HF Trumix®singlegashighflowblender30kegs/hourTM-2 Trumix®doublegasblender30kegs/hourTM-2HF Trumix®doublegashighflowblender60kegs/hourTM-3 Trumix®triplegasblender30kegs/hourMV013 Checkvalvetee1/4”x1/4”x1/4”MV042 Checkvalvetee3/8”x3/8”x3/8”MV044 Checkvalvetee1/4”x1/4”x3/8”MV045 Checkvalvetee1/4”x3/8”x3/8”MV073 Checkvalvestraight1/4”x1/4”MV020 BeergasanalyzerwithadapterMV022 BeergasanalyzerwithadapterandleaksensorMV035 In-lineleakindicatordoubleMV039 In-lineleakindicatorsingleBLIP Bypassleakdetector
Trumix blenders come with standard 1/4" female NPT fittings, hose barbs available at no additional cost. Specify size: 1/4", 5/16", or 3/8".
BLIPBypassLeakDetector
Beergasanalyzers
Gas
Sys
tem
s: R
egul
ator
s, C
ompr
esso
rs, C
ylin
ders
PageD-9
100 Gary Avenue, Suite CRoselle, IL 60172Local: 847-524-1707Fax: 847-524-1710
lancermidwest.comcall: 888-674-5719email: [email protected]
LogiCO2MK9/MK10CO2Detectors/Alarms
CO2 is a colorless, odorless gas which normally exists at a concentration of .04% in the air, but above 4% concentrations has dangerous effects:• 4% = IDHL - immediate danger to health and life• 7% = Dizziness, vomiting, headache, reduced blood supply to the brain• 10% = Convulsions, unconsciousness, death• 20% = Death in a few seconds
The MK9 and MK10 are the most cost effective CO2 detection systems currently available. Four alarm levels fulfill ALL U.S. CO2 safety codes and norms. Central unit makes non-smelling invisible CO2 gas visible and advises what to do in different alarm situations. Automatic calibration is safer and zero maintenance. System is expandable up to eight sensors.
MK10 All-In-One SensorThe MK10 is a a CO2 monitor for the area CO2 equipment is used or distributed. It has an integrated sound and light alarm and can be used as a stand-alone unit or can be linked to a central unit for digital display of values. The MK10 performs self-calibration at regular intervals, eliminating the need for service calibration. The sensor can be linked to an existing fire alarm system that is connected to the fire department.
MK9 SensorThe MK9 sensor is a precision instrument that continuously monitors temperature and CO2 gas concentration using infrared analysis. It has red, yellow and green LED lights and an intermittent buzzer for Low Alarm and continuous sound for High Alarm. The MK9 performs a self-calibration at regular intervals, eliminating the need for service calibration. MK9 is compatible with MK7. The sensor can be linked to an existing fire alarm system that is connected to the fire department.
MK9 CO2 Central UnitThe multi-lingual Central Unit controls the safety system and displays measurements from up to eight MK9 or MK10 sensors. It is mounted outside the area being monitored, such as a manager's office. An information and instructional text for all Alert/Alarm and Error conditions is shown on the display. If multiple sensors are connected, each value indicates which sensor the value is from. The Central Unit has an alarm memory that remembers and reactivates any alarm after a power interruption. On the right side there is a sound mute/reset and test button.
LED and sound indications...• Green - the system is active, normal safe conditions• Yellow - Error• Red - CO2 concentration alarm: Low >1.5%, or High >3%• Beeping sound indicates Low Alarm (warning) or Error• Continuous sound indicates High Alarm (danger)
The Need for O2 DetectionLow levels of oxygen causes asphyxiation and leads to brain damage. High concentrations of nitrogen displaces oxygen. Wherever nitrogen is stored or used an O2 sensor is advised. Each O2 sensor comes with a horn/strobe, cables and splitters.
Horn/Strobe and Warning BeaconSensors are mounted 12" from the floor and therefore may not be visible from a distance. Horn/strobe and waterproof warning beacons are mounted high above sensors to provide greater visibility and audibility. Additional horn/strobes and beacons can be added.
Portable LogiCO2-ScoutA portable CO2 sensor takes at least 30 seconds to read the correct value, yet the human body reacts in about 2 seconds. To ensure safety, the LogiCO2-Scout is rolled into potentially hazardous areas where it remotely measures the concentration of CO2 and sends the values to a smartphone OUTSIDE the danger zone. Range: 65-100 feet.
FullyApproved
CO2leaksarecostlyanddangerous
MK10CO2Sensor/Beacon/Horn
CentralUnit
MK9CO2Sensor
O2Sensor
Horn/StrobeRedBeacon
LogiCO2-Scout
Gas
Sys
tem
s: R
egul
ator
s, C
ompr
esso
rs, C
ylin
ders
PageD-10 Continuingproductimprovementsmaynecessitatechangeswithoutnotice.©2017Lancer
100 Gary Avenue, Suite CRoselle, IL 60172Local: 847-524-1707Fax: 847-524-1710
lancermidwest.comcall: 888-674-5719email: [email protected]
LogiCO2 Safety Systems
MK10CO2DetectorSet#2025MK9CO2DetectorSet#2049
Includes:MK9 CO2 Central UnitMK9 CO2 Sensor Horn/Strobe LED with 3 ft cable1 Cable red 15 ft1 Cable red 30 ft1 Cable blue 15 ftRJ45 1-1 spliterRJ45 1-2 spliterTransformer 1A & Plug - ULPlug-lockBag with 6 screws and plug CO2 safety monitoring sign Sign horn/strobe MK9/10Installation manual MK9 Quick-guide MK9
MK9 Central Unit Specifications:Operating temp: 0° to 104° FOperating humidity: 0-95% RHPower supply: 24V DCPower usage: No alarm status: 21 mA Alarm status: 32 mAAcoustic signal-strength: 80 dBa (1m)Size (LxWxD): 3.5" x 6.3" x 1.5"
MK9 Sensor Specifications:Operating temp: 0° to 104° FOperating humidity: 0-95% RHPower supply: 24V DCPower usage: No alarm status: 56 mA, Alarm status: 68 mAAcoustic signal-strength: 76 dBa (1m)Automatic calibration: 60 daysSize (LxWxD): 3.5" x 6.3" x 1.5"
Horn/Strobe Specifications:Operating temp: 23° to 122°FPower supply: 18-24V DCPower usage: 120 mA @ 24V DC supplyAcoustic signal-strength: 110 dB / 1 mFlash intensity: 115 CDFlash frequency: 65/minSize (LxWxD): 5.3" x 4.5" x 2.4"
Includes:MK10 CO2 Detector/AlertHorn/strobe LED with 3 ft cable1 Cable blue 30 ft1 Cable red 15 ftStainless steel protection bar for SensorRJ45 1-1 spliterTransformer 1A & Plug-ULPlug-lockCO2 safety monitoring sign Sign CO2 AlertSign horn/strobe MK9/10Installation manual MK10Quick-guide MK10
Optional:Part # 0328 - MK9 CO2 Central Unit
MK10 Specifications:Operating temp: 0° to 122° FOperating humidity: 0-95% RHPower supply: 24V DCPower usage: 600 mA peak, 30 mA averageAutomatic calibration: 60 daysWeight: 0.88 lbsSize: 3.54" diameter, height 4.75"
Horn/Strobe Specifications:Operating temp: 23° to 122°FPower supply: 18-24V DCPower usage: 120 mA @ 24V DC supplyAcoustic signal-strength: 110 dB / 1 mFlash intensity: 115 CDFlash frequency: 65/minSize (LxWxD): 5.3" x 4.5" x 2.4"
Includes:Portable CO2 sensor unit and foam ballNeckband with safety clipUSB charging cableNote: Does not include smartphone
LogiCO2-Scout Specifications:Works with Bluetooth communication to a iPhone or Android AppBattery: Li-Ion 3,6V, 1150mAhBattery operating time: Approx. 12hBattery charging: with a USB - Micro USB cable to a smartphone chargerBattery charging time: Approx. 2.5hWarning levels: 1.5% and 3% CO2 Weight: 2.68 ozDimension (HxWxD): 3.56" x 2.25" x .78"
LogiCO2-Scout#2216
CO2 detection distance = 15 ft radius
MK9O2DetectorSet#2056
Includes:MK9 O2 Detector/AlertMK9 Central UnitHorn/Strobe LED with 3 ft cableTransformer 1A & Plug - UL1 Cable blue 30 ft, 1 Cable red 15 ftRJ45 1-1 and 1-2 splitterO2 safety monitoring & horn/strobe sign
MK9 O2 Specifications:Measurement range: 0-25% O2-concentrationPower supply: 24V DCOperating Principle: FB-opticalSize (LxWxD): 3.5" x 6.3" x 1.5"
Gas
Sys
tem
s: R
egul
ator
s, C
ompr
esso
rs, C
ylin
ders
PageD-11
100 Gary Avenue, Suite CRoselle, IL 60172Local: 847-524-1707Fax: 847-524-1710
lancermidwest.comcall: 888-674-5719email: [email protected]
LogiCO2MK9/MK10CO2Detectors/Alarms
CO2 Safety System Parts and Accessories
Cableraceway
MK9O2Sensor
MK9CO2SensorCentralUnit
RedSiren
Transformer
RedCable BlueCable
RemoteConnection
USB-MODBUSinterface
CO2warningsign
RedBeacon
MK10CO2
Sensor/Beacon/Horn
MK10protectionbar
PortableCO2monitorLogiCO2-Scout
Extension1:1-2-4
Horn/Strobe
Outdoorstrobe/horn
Trafficlight
Autoshut-offvalve
MK7/MK9protectionbar
Powerbox
Part # Description
0328 Centralunitadd-onkitforMK7/MK9/MK10systemwith15'redcable,RJ451-2splitter,CO2SafetySystemMK9sign
0311 CentralunitonlyforMK7/MK9/MK10system
2117 MK9CO2sensoradd-onkitforMK7/MK9/MK10systemwithamberlenshorn/strobe,cables,connectorsandsigns
1134 MK9CO2sensorassparepartonly
2124 MK9O2sensoradd-onkitwithhorn/strobe,cables,splitters,con-nectorsandpowersupply
2100 MK10CO2add-onkitforMK7/MK9/MK10systemwithsensor/horn/strobe,SSprotectionbar,cables,connectorsandsigns
1158 MK10CO2sensorwithcableassparepartonly2216 LogiCO2-Scoutsensor,foamball,chargingcable,neckband0438 Amberlenshorn/strobe,3'cableandsign1172 Amberlenshorn/strobe,3'and33'cables,splittersandsign0454 Whitehorn/strobeforoutdooruse,3'cableandsign0427 TrafficlightforMK7andMK9,withhornandsign0403 Flash-24-RweatherproofLEDwarningbeacon0458 Redsirenforhighalarmindication,includescable0717 Redcable,15ft0724 Redcable,30ft0731 Bluecable,15ft0748 Bluecable,30ft0519 Cableextension1-10526 Cableextension1-20540 Cableextension1-4FWF-10511 Foldable1"rigidracewaywithadhesivebackingforcables,50ft0465 Remoteconnectiontofiredepartmentorrunexternalventilation0468 Shut-offvalvecontrolledbyCO2monitorduringalarmorpowerloss0478 Powerboxsmall,connectmultisensorswithlargerpowersupply0474 Powerboxlarge,connectmultisensorswithlargerpowersupply0021 Transformerpowersupply1ampforMK7,MK9andMK10
0953 USB-MODBUSinterfaceandsoftwaretoviewandlogCO2sensorlevelsonacomputer
0199 MK10stainlesssteelprotectionbar0182 MK7andMK9stainlesssteelprotectionbar1240 MK9centralunitsign1257 MK10CO2alertsign1264 Horn/strobealertsign1278 Flash-24-R(beacon)sign1285 Siren-24-Rsign
Gas
Sys
tem
s: R
egul
ator
s, C
ompr
esso
rs, C
ylin
ders
PageD-12 Continuingproductimprovementsmaynecessitatechangeswithoutnotice.©2017Lancer
100 Gary Avenue, Suite CRoselle, IL 60172Local: 847-524-1707Fax: 847-524-1710
lancermidwest.comcall: 888-674-5719email: [email protected]
AirCompressorsandAccessories
Oil-less air compressor with air line filter/regulator:• Motor: 5/8 HP• Voltage:110V/60hz• Output: 2.6 CFM• Maximum pressure: 100 psi• Operating pressure: 70-100 psi• Noise level: 62 decibels• Tank size: 2 gallons• Includes filter/regulator with gauge• Dimensions: 16.5"L x 13"W x 16"H, Weight: 37 lbs.• Shipping dimensions: 15" x 17" x 18", Shipping weight: 45 lbs.
Part Number DescriptionCU012 Oil-lessaircompressorwithfilter/regulatorCU011 Oil-lessaircompressorwithfilter/regulator,autodrainvalveandmufflerCU011-SC SuitcasestylecompressorwithautodrainandmufflerVAL039 Generalpurposeairlinefilter/regulatorVAL038 Automaticcondensatedrainvalve
Automatic Condensate Drain Valve• Timer specification: interval time 1-120
minutes, adjustable• Supply voltage: 115V• Valve specification: type 2/2 way direct acting• In/out ports: 1/8" NPT female
General Purpose Air Line Filter/Regulator• 1/4" NPT female in/out ports 0-150 psi gauge• 1/8" NPT female gauge port• Maximum pressure 150 psi• Adjustment range 0-120 psi• Maximum flow 15 CFM• 5 micron filter
Part Number Description82-4428 Aircompressor,6gallon,oilfree
Part Number Description99-2201 Airstation,wallmount,115V
Gas
Sys
tem
s: R
egul
ator
s, C
ompr
esso
rs, C
ylin
ders
PageD-13
100 Gary Avenue, Suite CRoselle, IL 60172Local: 847-524-1707Fax: 847-524-1710
lancermidwest.comcall: 888-674-5719email: [email protected]
Senco®AirCompressor
PC1010, 1 hp (peak), 1/2 hp (running) electric oil-less compressor is ultra-quiet and ultra-light (only 20 lbs.). Direct drive induction motor/pump for efficient operation. One gallon air capacity. 120 psi max output. 1/4" quick disconnect coupler. Individual gauges for tank and regulated output pressure. CSA approved. 1 year warranty.
• SCFM: 90 PSI: 0.7 • Pump Up-Time: 0-120 PSI: 128 seconds • Recovery Time: 90-120 PSI: 35 seconds • Max Pressure: 125 PSI • Tank Capacity: 1 gallon • Weight: 20 lbs. • Dimensions: 13"H x 14"L x 10"W
Part Number Description0229558 SencoPC1010oil-lessaircompressor,115V
Taprite is a registered trademark of Taprite-Fassco Mfg., Inc., San Antonio, Texas.
Senco is a registered trademark of Senco Brands, Inc., Cincinnati, Ohio.
Catalina Cylinders is a registered trademark of Catalina Cylinders, Inc., Garden Grove, California.
INFINITY is a trademark of Sterling Pressure Systems, San Antonio, Texas.
LogiCO2, MK7, MK9 and MK10 are trademarks of LogiCO2 International AB, Västra Frölunda, Sweden.
Part # Description1741S Aluminumairdistributor,1-waywithshut-off1742S Aluminumairdistributor,2-waywithshut-off1743S Aluminumairdistributor,3-waywithshut-off1744S Aluminumairdistributor,4-waywithshut-off1741 Aluminumairdistributor,1-way1742 Aluminumairdistributor,2-way1743 Aluminumairdistributor,3-way1744 Aluminumairdistributor,4-way
AluminumAirDistributors
17411741S
17421742S
17431743S
17441744S