GAS TANKS

7-2

Note: All tanks should be tested for fitment and pressure tested prior to painting. In addition, we recommend using a tank prep and tank liner sealer.

STRETCHED STYLE FLaT SiDE FaTbob TankSG3124 6.0 gallon stretched Flatside evolution® screw top style

FLaT SiDE FaTbob TankSG3121 3.5 gallon Flatside evolution® screw top style Repl. oEM’s 61218-85 & 61426-85G3122 5.0 gallon Flatside evolution® screw top style Repl. oEM’s 61211-84a & 61228-84G3123 6.0 gallon Flatside evolution® screw top style

FaTbob GaS TankSthese Fatbob gas tanks are available in styles of Cam-Lok and screw top. they accept stock dashes, fit stock frames, and stock gas valves. Sold in pairs.G3120 3.5 gallon late screw top style Repl. oEM 61219-83 & 61425-83G3010 3.5 gallon early Cam-Lok style Repl. oEM 61213-83 & 61229-83G3130 5.0 gallon late screw top style Repl. oEM 61213-83 & 61229-83G3020 5.0 gallon early Cam-Lok style Repl. oEM 61211-67 & 61228-67a

7-3

MOUNTING KITS

UnivERSaL FaTbobMoUnTinG kiTConsists of bracket assembly, front lower bracket & two adjustable clamps.G3531 Universal Mounting Kit

FaTbob Tank MoUnTinG kiTSthis complete kit includes top and lower brackets. If you ever cut your Fatbob mounts off you can restore your bike back to it’s original look.G3030 Mounting Kit

LaTE FaTbob MoUnTinG kiT bY baDLanDSInstall late model fatbobs on your ‘58-84 FL, FX or custom frame using this Badlands conversion kit. Includes detailed instructions, mounting brackets, all necessary hardware and even the tank grommets. easy to install and requires only minimum welding.G3625 Late model tank conversion mount kitG3626 Late model tank conversion mount kit for custom frames

MoUnT FoR FLaTSiDE GaS TankSIncludes all necessary hardware to mount a3.5 or 5 gallon flat side gas tankG3021 Mounting Kit

FaTbob Tank MoUnT kiT With shimsF4145 ‘88-up Fatbob

RUbbER MoUnTS FoR FLaTSiDE GaS TankSWorks for 4 speed FX models ‘85-86 and Softail® ‘84-99. G3022 6 pack grommets Repl. oEM 11447

GAS TANKS

7-4

FaTbob STYLE TankS FoR SpoRTSTER® bY paUGHCoBoth tanks are dual cap. Cam lock style.G1022 ‘95-98 Sportster® 4.2 Gallon G1021 ‘82-94 Sportster® 4.2 Gallon not shown

SinGLE oR DUaL CapaxED STYLE FoR SpoRTSTER®

4.2 gallon capacity. Mounts to stock framemounts and accepts stock right side petcock. 18 gauge steel. Cam lock style.G2502 ‘82-’94 XL single cap axedG2503 ‘82-’94 XL dual cap axed

SinGLE oR DUaL Cap MUSTanG STYLE FoR SpoRTSTER®

3 gallon capacity. Bolts to stock frame mounts and accepts stock right sidepetcock. 18 gauge steel. Cam lock style.G2504 ‘82-94 XL single cap mustangG2505 ‘82-94 XL dual cap mustang

G2504

G2505

G2502 G2503

7-5

GaS Tank FoR EaRLY SpoRTSTER®

original style bolt-on gas.this tank features stockmounts and holds 2.4 gallons.G3527 ‘55-78 XL Repl. oEM 61006-63b

kinG GaS Tank FoR SpoRTSTER®

this King gas tank is made2” wider than pre-’79 stock tanks.tank is high tunneled andfeatures stock mounts.It will hold 3.1 gallons. G3528 ‘79-81 XL 3.1 gallon

GaS TankS FoR LaTE SpoRTSTER®

Pressure tested under water. Utilizes stock H-D® gas cap and petcock. tank has tillotson tube vent if needed. tunnel 3½” high X 2” wide. tank 17” long X 10¾” wide. Fits ‘82-93 XL models.

G3530 3.1 gallon tank

GAS TANKS

GAS TANKS & ACCESSORIES

7-6

GaS Tank MoUnT aLLEn SCREw SETS bY GaRDnER wESTCoTT

F6145 ‘88-up FXRS F6146 ‘84-89 FXStF6147 ‘90-up FXSt & FLStF6148 ‘91-up Dyna Glide®

F6139 ‘86-up XL

CUSToM GaS TankSbY paUGHCo

SinGLE oR DUaL Cap axED

4 gallon capacity with one 3/8” left side petcock outlet. Horseshoe mounting tab on front. Dimensions: 16” long; 13-1/2” wide; 9” deep; 3” wide tunnel x 2” deep.

G2500 Axed single cap G2501 Axed dual cap

G2506 Mustang, dual capG2507 Mustang, single cap

FoR CUSToM FRaMES wiTHoUT Tank MoUnTS

SinGLE oR DUaL Cap MUSTanG FaTbob STYLE

4.75 gallon Mustang style tank with left side external petcock. Dimensions: 20” long; 13” wide; 8” high; tunnel is 20-3/16 long, 2-3/16” wide & 3-3/4” deep. tank is indented on bottom for rocker box clearance. Will accept 3/8” or 1/4” petcocks.

2” STRETCH GaS Tank4.2 gallon tanks fit ‘84-99 Softail®. Necessary mounting hardware included. No welded tips. Some finishing will be needed due to seam in middle. Also some stock and custom seats may not match up to tanks due to 2” stretch. G3126 2” stretch tanks with dual screw in caps G3127 2” stretch tanks with right side single flush mount locking cap which is included. not shown

4” STRETCH GaS Tankthis center fill tank has a chrome flush mount gas cap which is included. 3.8 gallonG3128 4” stretch center fill tank

GAS TANK ACCESSORIES

7-7

TUbE SEaL™ HoSE EnDSDesigned for applications where high pressure connections are not required. tube Seal™ hose ends are primarily intended for gas and oil cooler lines. tube Seals™ are machined from aircraft aluminum and are brightly anodized for professional show appearance. Maximum application pressure: 50 PSI. 6 pack. b6540 Polished, 1⁄4” for #4 hoseb6550 Polished, 5⁄16” for #6 hoseb6560 Polished, 3⁄8” for #8 hose

STREET-FLEx™ HoSE SERiES Developed with the same Russell quality Street-Flex™ hose utilizes a CPe inner liner, with a single wire outer braid to achieve an operating pressure of 250 PSI. Designed for use with tube Seal™ hose ends. Available in traditional stainless steel.

RUbbER HoSE FiTTinGS FRoM paUGHCoUniversal fittings for gas or oil tanks. Sold each.o3619 1⁄8” pipe, 1⁄4” hoseo3610 1⁄8” pipe, 3⁄8” hose

SkULL Tank MoUnT CovER SETthe ultimate bad-ass accessories, these 5/16” chromed tank mount covers come complete with diamond cut eyes to glue in the sockets. See Wild one Products in index for matching skull accessories.G3050 Skull tank mount cover set

RUSSELL FUEL CRoSSovER LinESConstructed of stainless braided hose with chrome ends, these fuel crossover lines utilize chrome compression fittings in place of the standard clamps. G3461 For 1/4” outlets, universal fit not for FXR and Dyna Length 11 ½”G3462 ‘00-01 Softail® not for Deuce Length 5 ½”

LEnGTH3’ 6’ 18’ SizE

b6610 b6454 b6455 1/4”b6620 b6630 b6456 5/16”b6640 b6650 b6660 3/8”

FaTbob SHUT-oFF vaLvEthru-tank gas shut-off valve, fits pre-’66. Complete assembled unit featuring cap knob, seat and shut off rod. Fits stock tanks only.G3470 Shut-off valve Repl. oEM 62033-41

GAS TANK ACCESSORIES

7-8

STainLESS STEEL Mini CLaMpSthese stainless steel screw-on mini clamps are available in two sizes: 9/16” for 1/4”-5/16” hose and 11/16” for 3/8” hose.F2221 9/16” Screw-on mini clampF2222 11/16” Screw-on mini clamp

CRiMp HoSE CLaMpSoeM style hose clamps.Diameters listed reflect size before crimping. 50 pack.C2551 11/32” C2552 7/16”C2553 17/32”

CoLoR HoSE EnDS wiTH CLaMpSthese hose ends are made of polished aluminum and are available in chrome as well as red and blue anodized finish and in two different sizes.

C2554 19/32”C2555 11/16” C2556 13/16”

pinGEL® CHRoMEMETRiC aDapTER nUT3/8” NPt to 22mm adapter nut for ‘75-95 H-D® models.G3495 Adapter nut

CHRoME CRoSSovER GaS LinEFor stock Fatbob gas tanksG3460 ‘48-65 FL Repl. oEM 62355-48

CHRoME RED bLUE SizEF2215 F2217 F2219 1/4”-5/16”F2216 F2218 F2220 3/8”

pinGEL® Tank bUnGthese male tank bungs with H-D® metric thread are available in aluminum and steel for welding to custom tanks or repairing stock.G3472 SteelG3473 Aluminum

pinGEL® FUEL injECTion To CaRbUREToR ConvERSion kiTthese kits replace the factory tank fittings allowing the use of a fuel valve to feed your carburetor.G3402 Magneti Marelli FI to Carb KitG3403 Delphi FI to Carb Kit

G3402

G3403

GAS FUEL VALVES

7-9

pinGEL® ‘DESiGnER’ powER-FLo™ FUEL vaLvESPingel’s designer line includes diamond, round, hex, and round with flames. All are chromed to perfection and feature high quality o-rings for a leakproof seal, a stainless steel fuel filtering screen and an easy-turn lever for on/off/reserve positions. Fits ‘75-up w/22 mm external thread. Styles A is backward, B is inward, and C is forward.

pinGEL® powER-FLo™ HEx FUEL vaLvESthese chrome hex gas valves not only look great on your bike but they flow 76 ounces per minute, compared to the 28 ounces per minute amount from the stock H-D® valve. Power-Flo™ is just what your stock or high performance engine and carburetor are craving. Fit ‘75-up models with 22mm external thread, or pre-’75 tanks internally threaded for 3/8” NPt. own a fuel valve you can operate without pliers!

G3485 G3488 G3469 G3465 G3468

aLL powER-FLo™ vaLvES aRE STanDaRD wiTH 5/16” HoSE oUTLETS.

noTE: All descriptions and designs are left side mounted top view of the valves illustrating the position of the lever. See below for

suggested valve positioning on gas tanks.

STYLE a:Left Side mounted,Hose outlet Facing

Backwardor

Right Side MountedHose outlet Facing Forward

STYLE b:Left Side Mounted,

Hose outlet Facing Rightor

Right Side MountedHose outlet Facing Left

Right or Left SideHose outlet Facing Down

STYLE C:Left Side Mounted,

Hose outlet Facing Forwardor

Right Side MountedHose outlet Facing Back

STYLE DiaMonD RoUnD FLaMED LiGHTEninG vERTiCaLGRoovE

FLaG RoUnD

FLaG HEx

wavE HEx

RoUnD knob

RoUnD in-LinE

a G3481 G3487 G3499 G3464 G3467 n/a n/a n/a n/a n/ab G3485 G3488 G3469 G3465 G3468 G3451 G3452 G3456 G3457 G3458C G3479 G3486 G3489 G3463 G3466 n/a n/a n/a n/a n/a

G3451 G3452

pinGEL® SinGLE oUTLET RESERvE vaLvE vaCUUM vaLvE HEx DESiGnFinally! A direct oeM replacement vacuum operated fuel valve has the highest fuel flow of any vacuum style fuel valve on the market. these fuel valves have the same safety feature as a oeM. When the valveis left in the on position, with the motor off, the fuel flow will be shut off automatically. these valves feature the same high quality, lustrous chrome finish as our Power-Flo™ line.G3453 Vacuum gas valve forwardG3454 Vacuum gas valve backwardG3455 Vacuum gas valve inward

3.2.1.3/8” npT wiTH nUT 1. HEx vaLvEG3492 G3475 STYLE aG3493 G3476 STYLE bG3491 G3474 STYLE CG3494 G3478 2. DUaL oUTLETG3496 G3477 3. nippLE Down

G3456 G3457

G3458

GAS FUEL VALVES

7-10

SkULL pETCoCk CovER bY wiLD 1American made skull accessories by Wild one are bad to the bone! See Wild one in index for more.p3020 Fits Pingel® petcocks

EaRLY STYLE CHRoME pETCoCkthese custom petcocks fit all stock Harley® pre-’75 tanks and any custom tanks with 3/8” NPt. Available in straight through and 90° outlet.G3430 90° right handG3450 Straight Repl. oEM 62125-55b

LaTE STYLE CHRoME pETCoCkthese custom petcocks fit all stock Harley® tanks from‘75-up and any custom tank with 22 mm male connection. they are available with straight or 90°.G3440 90° right hand short screenG3532 Straight Repl. oEM 62163-75

LaTE STYLE CHRoME pETCoCkHigh flow replica original late chrome petcocks fit all late stock Harley® gas tanks ‘75-up and any custom tanks with 22mm connection. CG3533 Straight Repl. oEM 62129-75G3390 90° right hand w/tall screen 1/4” spigot Repl. oEM 62167-81G3534 90° left handG3535 Repl. nylon screen straightG3536 Repl. short nylon screen 90°G3537 Repl. nut for straight & 90°

7-11

GAS FUEL VALVES & ADDITIVES

aCCEL® HiGH FLowAccel’s high-flow fuel valve increases the cross-sectional area by over 10% and provides the extra fuel needed for mild to wild engines. Made in the USA, this valve kit is complete with the adapter nut and features show chrome plating, a 100 micron screen and a reserve position.G3401 ‘75-up Big twins

pj1 GaS EnERGizERePA approved power boost with racing fuel to increase speed. Protects valve seat wear due to low-lead gasoline & reduces carburetor/intake valve deposits.C1015 18 oz. eachC1050 6/Case

aCCEL® banjo HiGH FLowthis Banjo-Style High Flow Fuel Valve kit provides all of the advantages of the G3401 plus one more: a 180° rotating outlet. the fuel valve outlet may be swiveled and then secured to point in any direction for custom fuel hose routing. Made in the USA.G3400 ‘75-up Big twins

GAS CAPS

7-12

GRoovED

babY Moon

FLaMEDLoUvERED

pEakED

RaDiUS

1982-E96vEnTED

1982-E96non-vEnTED

L96-UpvEnTED

L96-Upnon-vEnTED

STYLE

G3801 G3802 G3803 G3804 RaDiUSG3545 G3546 G3807 G3808 babY MoonG3805 G3806 G3809 G3810 pEakEDG3549 G3550 G3811 G3812 GRoovEDG3547 G3548 LoUvEREDG3551 G3552 G3815 G3816 FLaMED

7-13

GAS CAPS

CUSToM FLUSH MoUnT GaS Capto open just push, twist & cap pops up. Weld in for custom applications. G2239 Flush Mount Gas Cap

Closed

SkULL biLLET GaS CapG2235 ‘82-96 Skull billet gas cap vented G2236 ‘82-96 Skull billet gas cap non-vented G2237 ‘96-up Skull billet gas cap ventedG2238 ‘96-up Skull billet gas cap non-vented

nESS TECH® Low GRaviTY SCREw in GaS CapG3819 ‘82-96 Rad II gas cap vented G3820 ‘82-96 Rad II gas cap non-ventedG3821 ‘97-up Rad II gas cap vented G3822 ‘97-up Rad II gas cap non-ventedG3823 Rad II gas cap Dummy Replaces the fuel gauge style gas caps found on some late Big twin models

küRYakYn FLUSH MoUnT GaS CapSthese slick flush mount gas caps have the high tech look of aviation style fuel fillers. Vented and non-vented versions available to fit all screw type H-D® tanks from ‘82-present. the built in trim ring protects the painted surface around the filler opening from dings and gas stains. A keyed entry system permits their ultra thin profile and prevents tampering.G2233 Vented flush mount gas cap R.H. threadG2234 Non-vented flush mount gas cap L.H. thread

opened

GAS CAPS & COVERS

7-14

CHRoME biLLET GaS Cap CovERthis exclusive Billet Gas Cap Cover is easily installed over the stock gas cap with the special adhesive supplied. Without gauge hole. Fits all oeM and most aftermarket gas caps from 1973 to present.G2902 Smooth Gas Cap Cover

SkULL GaS Cap CovERSthese great skull designs are a simple custom look you can add to your bike. Install with adhesive such as silicone or epoxy which is not included. Available in 2 patterns. Matching skull accessories available to complete the look. Please see the index for skull products. G3041 Single skullG3042 Multi skull

GaS Tank nECk SkiRTSProtect your paint around the gas cap opening with these gold plated rings. Sold in pairs.G3003 Neck skirts

7-15

GAS CAPS

LaTE STYLE SCREw in GaS Capthese late style gas caps are chrome plated with plastic thread, emission control approved. Will fit models to early 1996 unless a thicker gasket is used.G3540 Screw in Fatbob, pairG3140 Right side cap with vent also fits single tank models Repl. oEM 61102-83G3150 Left side cap without vent Repl. oEM 61103-83

CHRoME SCaLLop‘73-up Cam-lok style. one piece die-cast gas caps complete with cork seals. Vented version has a ball check value to prevent leakage. G3070 Fatbob scallop, pairG3080 Scallop with vent for right Fatbob or XL.

CHRoME LaTE STYLE ‘73-Up Cam-lok style.G3100 With vent, right side Fatbob tank Repl. oEM 61102-73G3110 Without vent, fits left side Fatbob tank Repl. oEM 61103-73a

CHRoME oRiGinaL STYLE‘65-73 Cam-lok style. Fits most Harley gas tanks thru ‘64 and right side ‘65 to early ‘73. Also fits Sportster XLCH thru early 73.G3040 early Fatbob, pairG3060 With vent Repl. oEM 61103-36G3090 Without vent Repl. oEM 61103-65

GAS FUEL FILTERS

7-16

k&n in-LinE FUEL FiLTERSIdeal for today’s dirty gasoline. High volume, low pressurein-line gas filters are easily cleaned by back flushing.Stainless steel mesh filter element.G3558 1/4” flanges, singleG3559 1/4” flanges, 12-pack display boardG3560 5/16” flanges, singleG3561 5/16” flanges, 12 pack display board

RUSSELL pREMiUM FUEL FiLTERSthese premium quality gas filters are perfect for motorcycle applications. their alloy cases are impervious to vibration, heat and shock. their compact size makes them simple to install. the replaceable bronze filter element eliminates the tiny particles of dirt, rust and grit from the fuel that causes clogging and excessive wear. Sold each.

pinGEL® in-LinE FUEL FiLTERthis new super-short in-line fuel filter was designed to appeal to the motorcycle enthusiast. Machined from high strength aluminum bar stock with attention to detail and aesthetics. It supports a lifetime cleanable element and is the only filter designed to meet the high flow requirements of the Pingel® Power-Flo™ valves and today’s high performance carburetors.G3483 5/16” inlet - 5/16” outletG3404 3/8” inlet - 3/8” outletG3406 6AN inlet - 6AN outlet

GLaSS boDY FUEL FiLTERSG3480 5/16” short glass typeG3538 5/16” long glass type

RUSSELL CLEaR FLow™ Filter for visual inspection without removal of harmful contaminants from fuel system. Sold with 6 different adapter fittings.b6780 1/4”, 5/16”, 3/8” universal - longb6790 Replacement element - long

CHRoME SizEb6690 1/4”b6720 5/16”

7-17

DASH & SPEEDOMETER KITS

DaSH & SpEEDo kiTSAll kits come complete with chrome dash cover with lenses, mounting kit, speedometer with reset knob, ignition switch with keys, all necessary hardware.D3318 ‘68-84 Late cast face, 1:1 speedo kitD3319 ‘68-84 Late cast face, 2:1 speedo kit

D3314 ‘62-67 3-light face, 1:1 speedoD3315 ‘62-67 3-light face, 2:1 speedo

D3312 ‘48-61 2-light face, 1:1 speedoD3313 ‘48-61 2-light face, 2:1 speedo

D3316 ‘46-47 Cateye face, 1:1 speedo kitD3317 ‘46-47 Cateye face, 2:1 speedo kit

SPEEDOMETER ACCESSORIES

7-18

SkULL DaSH nUT CovER FxR & SoFTaiL® bY wiLD 1the ultimate bad-ass accessory, this chromed nut cover comes complete with diamond cut eyes to glue in the sockets. For matching accessories see Wild one Products in index.D3020 Skull dash nut cover

CHRoME CHokE knob CovERS these choke knob covers are machined of billet aluminum. Fits over stock black plastic knob.

C2885 Ball milled

SpEEDo DRivE UniTSFront wheel speedometer drive units.S4309 ‘73-83 XL/FX, FX, FXR with Narrow Glide 19” wheels, 2:1 ratio Repl. oEM 67127-73S4310 ‘80 FX 1:1 ratio Repl. oEM 67124-80S4311 ‘81-84 FL 4-speed, ‘82-86 FLt/FLHt 2:1 ratio Repl. oEM 67073-81S4312 ‘84-94 FX, FXR, XL & Dyna Glide® with 19” Narrow Glide® front wheels, 2:1 ratio Repl. oEM 67127-84S4313 ‘84-up FXSt/C, Dyna Wide Glide® & 4-speed FXWG with 21” front wheels, 2:1 ratio Repl. oEM 67120-84a

CHRoME SpEEDo DRivE CovERthis chrome die-cast speedo cover installs easily over the oeM speedometer drive unit. this great item really adds style. By Wild 1.S6610 All Softails®

S6620 eVo XL/FXR

SpEEDo RESET knobSDie-cast knurled knob and screw setS4329 ‘90-up Softail® Repl. oEM 67215-89S4303 ‘68-84 FL, ‘71-89 FX w/cast dash, ‘80-87 FXWG/FXSt Repl. oEM 67215-68

S4309 S4310 S4311

S4312

S4313

C2895 Smooth

SPEEDOMETERS & TACHOMETER

7-19

SpEEDoMETER wiTH TaCHoMETERthe 1:1 ratio is used for ‘68-83 FL/FX/FXWG models with transmission drive units. the 2:1 ratio unit is used for ‘47-67 transmission drive units and late model front wheel drive application thru ‘90. except ‘84-up Softail® and FXWe.S6170 Big twin Speedo with tach 1:1 ratioS6180 Big twin Speedo with tach 2:1 ratio

b. Silver on black C. Green on black w/ Gold Center

a. white on black

D. Silver on black E. Silver on black F. black on white

1:1 2:1 2240:60 STYLE YEaRS CoLoR

S6020 S4307 S4338 a. 68-84 wHiTE on bLaCk

S6030 S6010 S4337 b. 62-67 SiLvER on bLaCk

S6080 S4300 C. 48-61 GREEn on bLaCk

S4308 S4306 S4336 D. 46-47 SiLvER on bLaCk

S6050 S4305 E. 41-45 SiLvER on bLaCk

S6070 S4304 S4335 F. 36-40 bLaCk on wHiTE

DASH COVERS

7-20

D3309

CaTEYE DaSH CovERShow chrome complete with lenses and trim rubberD3110 Cateye Repl. oEM 71270-39

D3308 ‘68-90 FL, Softail® Repl. oEM 71241-68D3309 Replacement dash lens kitD3310 Replacement trim rubber Repl. oEM 71295-68

D3308

CHRoME STYLE CaST DaSHZinc die-cast dash cover complete with lenses, light divider

and trim rubber for 4-speed Big twins and Softail®.

DaSH CovERS FoR FaTbobSShow chrome dash covers complete with lenses and trim rubber. Replacement lenses and trim rubber are also available. Speedo not included.D3050 2-light dash Repl. oEM 71271-47D3304 Replacement Lens for 2-lightD3060 3-light Fatbob coverD3305 Lenses for 3-light 1 blue, 2 redD3307 Replacement trim rubber

D3060

D3050

DaSH iGniTion CovER knob‘68-84 FLH, ‘84-94 Softail®D3043 Knob

CUSToM SoFTaiL® DaSH FRoM MiLwaUkEE iRonthis bolt on steel dash is made from 14 gauge cold rolled steel on top and 16 gauge precision laseer cut sides. and trim rubberD3401 Custom Dash

7-21

DASH MOUNTING PLATES

aLL FaTbob MoUnTinG pLaTES CoME CoMpLETE wiTH HaRDwaRE.

D3120 Cateye ‘36-46 Repl. oEM 70935-39

CaTEYE DaSH MoUnTinG pLaTE

D3070 ‘47-67 Dash mounting stud & nut. Chromed to complement your dash.

D3311 ‘68-up for late style cast dash. Fits D3308 on page 7-20.

LaTE STYLE MoUnTinG pLaTE

D3130 3 light , comes complete with all hardwareD3080 2 light repl. oEM’s 70932-48 & 70938-49

Two LiGHT MoUnTinG pLaTE THREE LiGHT MoUnTinG pLaTE

DASH PANELS & COVERS

7-22

Low RiDER CovERenhance your Fatbob with these beautifully chromed dashes.D3040 Die cast for Low Rider & late FX models ‘77-84 Repl. oEM 71301-77D3030 trim rubber Repl. oEM 61401-82

D3030

D3040

LEGEnDS biLLET DaSHES these American Made chrome dash panels feature the Speed Ball design and are contoured for an accurate fit. See lower dash panels on opposite page for the finishing touch.D3061 ‘68-95 Big twins with cast dash except FXDWG. Upper Chrome Dash Indicator Light opening 1”x 3 ¼”D3063 ‘93-up Dyna Lower Chrome Lower Dash Panel

nESS-TECH® biLLET DaSH aSSEMbLYthis unique one-piece dash assembly fits over theexisting speedometer housing. Available in chromefinish. trim rubber is included.D3325 ‘84-95 Softail® & ‘84-86 FXWGD3500 ‘96-99 Softail®D3511 ‘00-up Softail®

LEaTHER FLaME anD SkULL Tank panELL3211 ‘84-98 Flame skull tank panel

L3212 ‘99-up Softail®, FXD ‘93-up Flame skull tank panel

LEaTHER anD SkULL Tank poUCHD3214 ‘84-98 FXSt Skull tank pouch D3215 ‘99-up FXSt, ‘93-up Dyna Skull tank pouch

SkULL CHRoME biLLET panELD3211 ‘84-98 FXSt flatside tanks D3212 twin Cam®, Softail®, & FXDWG

CHRoME DaSH CovERD3038 ‘88-up FXR

7-23

DASH PANELS

nESS-TECH® CUSToM painTabLE DaSH CovERSthese custom dash covers fill the gap between Fatbob style gas tanks when using a large FL, FXSt style speedometer. All necessary mounting holes are pre-drilled for simple installation except odometer reset. Ready to sand and paint.D3320 ‘84-up FXSt, FL Flat side fatbobsD3322 FL thru ‘83 early style fatbob tanks

baLL MiLLED biLLET DaSH panELSthese top quality dash panels are machined from billet aluminum and chromed to a mirror finish. easily installed in minutes. D3600 ‘68-95 Big twins with cast dash except FXDWG Upper approx. 1” x 3-¼” indicator light openingD3601 ‘96-up with cast dashes, ‘93-up FXDWG Upper approx. 7/16” x 3-¼” indicator light opening D3602 Lower, ‘93-up Dyna

CHRoME DaSH panEL FoR FaTbobCovers the gap found on 3.5 and 5 gallon Fatbob style tanks.D3100 ‘36-84 Fatbob, comes with rubber mount.

CHRoME DaSH panEL FoR FaTbobFits Fatbob tanks in applications where there are no tank mounted instruments.D3300 Fatbob style tanks

CHRoME biG Twin DaSH panELSthese chrome die-cast tank panels fit ‘68-83 models with Fatbob tanks. they come with hooks and ring for easy installation and are also available with an embossed eagle.D3301 ‘68-83 Repl. oEM 61118-81D3302 ‘68-83 with eagle

DaSH TRiM FoR RoaD kinG®

A little trim goes a long way. Place this three dimensional trim plate at the bottom of the Road King® dash for a sleeker more finished look. easily installed in only minutes.D3213 Dash trim

bRACKETS & TACH COVER

7-24

poLiSHED TaCH bRaCkETSD3510 Angled bracket for springer 3 3/8”

TaCH DRivE GEaR CovERS6160 ‘71-80 Sportster® chrome

nESS-TECH® CUSToM CUSToM SpEEDo bRaCkETSthese chrome billet aluminum brackets are designed to mount various speedometers or tachometers to any 1” or 1 ¼” t bars.

GaUGE SUppoRT bRaCkETSChrome instrument support bracketsS4302 ‘86-up XL, FXR Repl. oEM 67053-86S4301 ‘83-85 Sportster® with a single gauge Repl. oEM 67053-83

S4302S4301

Style aDiameter

Single Gauge ‘84-94

Dual Custom 2 3/8”

1” D3502 D35031 ¼” D3516 D3517

Style a

Style b

Style bDiameter

Single Gauge ‘84-94

Dual Custom 2 3/8”

1” D3504 D35051 ¼” D3518 D3519

TACH & SPEEDO bRACKETS

7-25

biLLET aLUMinUM TaCH & SpEEDo MoUnTS bY YankEE EnGinUiTYChrome gauge mounts will work with all 1” bars. Designs are available with or without indicator light holes. Light holes are designed for late style 1996-present oeM indicator lights. All mini gauge mounts come with retaining rings to hold gauges in place. the oeM gauge mounts use stock rubber mount and rear cup. Choose the top & clamp needed to fit your specific needs.TaCH SpEEDo GaUGE TopSD3520 Single 2 5/8” Mini tach/Speedo top D3521 Dual 2 5/8” Mini tach/Speedo topD3522 Single 2 7/8” Autometer or ‘95-up H-D® oeM 2 5/8” Mini tach topD3523 Dual 2 7/8” Autometer tach/Speedo topD3524 Single 3 3/8” Autometer, VDo, ‘95-up H-D® oeM tach/Speedo topD3525 Dual 3 3/8” Autometer, VDo, ‘95-up H-D® oeM tach/Speedo topD3526 Single 3 3/8” Autometer, VDo, ‘95-up H-D® oeM tach/Speedo top for Road King®

baSE CLaMpSD3529 Handlebar clamp for ‘74-up risers, with led light bar and harnessD3527 35° Base for ‘74-up risers, no indicator lightsD3528 35° Base for ‘74-up risers, with led light bar and harnessD3530 35° Base for ‘74-up risers, with 4 indicator light holesD3531 35° Base for ‘74-up risers, with 5 indicator light holesD3532 35° Base for ‘74-up risers, ‘95-up oeM indicator lightsD3533 35° Base for H-D® Deuce style risers, no indicator lightsD3536 Flat mount base for ‘74-up risers, with no indicator light holesD3537 Flat mount base for ‘74-up risers, with led light bar and harnessD3538 Flat mount base for ‘74-up risers, with 4 indicator light holesD3539 Flat mount base for ‘74-up risers, with 5 indicator light holesD3540 Flat mount base for ‘74-up risers, for ‘95-up indicator lightsD3534 tach/Speedo base for 1” t-bars with no indicator lightsD3535 tach/Speedo base for 11/4” t-bars with no indicator lightsD3541 tach/Speedo base for 11/4” t-bars with 4 indicator light holesGaUGE CUpSD3542 Gauge cup for 2 5/8” Mechanical Mini tach/SpeedoD3543 Gauge cup for 2 5/8” electric Mini tach/SpeedoD3544 Gauge cup for ’95-up H-D® oeM 3 3/8” tach/Speedo

D3520D3522

D3524

D3525D3521

D3525 with D3528

D3524 with D3528

D3524 with D3527

SPEEDOMETER CAbLES

7-26

aLL CabLES aRE baRnETT STainLESS STEEL CLEaR CoaT.

paRT # REpL. oEM# LEnGTH appLiCaTion Top nUT

C7206 67024-84a67038-8467370-9067051-74

67060-87a67072-7967186-88

39” 39”39”39”39”40”39”

F.w. DRivE 12mm12mm12mm12mm12mm12mm12mm

C7207 67026-3767026-62

92062-65a

36” TRanS DRivE-aLL FL/Fx

5/8”

C7208 46” TRanS DRivE-xL THRU ‘69

5/8”

C7209 46” TRanS DRivE-xL ‘70-72

16mm

paRT # REpL. oEM# LEnGTH appLiCaTion Top nUT

C7201

40”

67051-7367052-78a67052-78b67063-8967077-85

67078-85a

39”40”40”40”36”39”

F.w. DRivE 16mm 16mm 16mm 16mm 16mm 16mm

C7202 67048-83a67060-96

42”41”

F.w. DRivE F.w. DRivE

16mm 16mm

C7203 67054-83a 45” F.w. DRivE 16mm

C720435”

67026-8167072-87b67079-86a

35”34”34”

F.w. DRivE 12mm12mm12mm

C720535”

67077-85 36” F.w. DRivE 16mm

C7201Fits XLX ‘83-85, XR1000 ‘83-84, FXB ‘80-82, FXe ‘73-e84, FXeF ‘79-84, FXLR ’86-94, FXR ‘86-94, FXRP ‘85, FXRS ‘84-87, FXS ‘77-84, FXSB ‘83-85, FLtR/I ‘97-99. 16mm 40” Long. Repl. oEM 67051-73, 67052-78a, 67078-85a, 67063-89, 67077-85

C7202Fits XLS L84-85, XLH 883/1100/1200 ‘86-94, XL ‘73, FLHt ‘96-UP, FXRS-CoNV ‘90-94, FXRSP ‘85-93, FXRt ‘85, FXRC ‘85-87, FXRP ‘86-87, FX ‘78-82, FXSB ‘82-84, FXRS ‘84-87. 16mm 43” Long. Repl. oEM 67048-83a, 67060-96, 67063-89, 67052-78b

C7206Fits XLCH ‘74-79, XLCR ‘77-78, XLH ‘74-83, XLt ‘77, XLS ‘79-82, FLHt ‘83-85, FLHtC ‘80-85 & ‘87-95, FLHtCU/I ‘89-95, FLHtP ‘84-85 & ‘87-95, FtL ‘80-83, FLtC ‘80-86, FXDWG ‘93-95, FXSt ‘84-90, FXStC ‘86-95, FXStS ‘88-95, FXStSB ‘95, FXWG ‘84-85, FXR ‘82-83, FXRP ‘84, FXRS ‘82-83, FLtCU ‘89-95, FLHtC/P ‘89-95, FXDG ‘91-95. 12mm 40” Long. Repl. oEM 67024-84a , 67038-84, 67051-74, 67060-87a, 67072-79, 67186-88, 67060-79b

C7204 Fits FL ‘81-84, FLHS ‘87-94, FLSt ‘86-90, FLStC ‘87-95, FLStF ‘90-95, FLStN ‘93-95, FLtC, FLtCU ‘87-95, FLtCU/I ‘96, FXDB-D ‘92, FXDB-S ‘91, FXDC ‘92, FXDL ‘93-94, FXRS ‘88-92. 12mm 36” Long. Repl. oEM 67026-81, 67072-87b, 67079-86a

paRT # appLiCaTion

C7207 trans-Drive, fits all FL/FX, 5/8”-18 top nut. 36” long

C7208 trans-Drive, fits all XL ‘65-69, 5/8”-18 top nut. 46” long

C7209 trans-Drive, fits all XL ‘70-72, 16mm top nut. 46” long

C7203 Fits FXRD ‘86, FXRDG ‘84, FXRt ‘83-84 & ‘86-94, XLS ‘83, FXWG ‘86. 16mm 47” Long. Repl. oEM 67054-83b, 67054-83a