ga series - flowserve€¦ · ga series gear pumps provide high efficiency, pu se free pumping even...
TRANSCRIPT
GA Series Heavy-Duty Gear Pumps
For Smooth, Efficient Handling of Viscous Products
Piganne/ tobviiac
4('Ill' IY1111111
widol ■ used l)ocau.c of their depelidabilih.
effivienev and relati‘ 1,11‘. 1•114.
lIl-,elf-primiw , and wt'll over
wide rangc nf fluid ftniporalurrs and
mdre COMI11011 attlidS
hanifird are:
%sphalt and Crude Oil
Chemicals and Pharmaceuticals
Chocolate and Confectionery Products
- Fuel Oils and Greases
Molasses and Sugar liy-products
Lube Oils and Greases
Paints, Lacquers and Varnishes
Printing Inks and Dyes
1)ulp and Paper Liquors
Soaps and Detergents
Solvents ainl Walte Oils
Ingersoll-Dresser Pumps
Marine Service GAs are well-suited for en room service on 44,40„ticv
, .
where supplymgJl aitl cation is operation. Petrochemicals
ring, blending and i aiI viscous 34.1,.(1-'k6it as crude oil,
fiffrgatsgs and grease are petztOfiltargrothly and efficiently with double-helical design.
e. • s
'cal of
Process Industries GA pumps are ideally suited for transfer, loading and,), movement of liquids i_nti) ark throughout manufablin processes. Paints and plastic4 these -liquids.
Food Products Handling high-temperature,
ear-sensitive
'9ge4- fr --As are ideal applications for the smooth-running G fOitttp4dng oils, syrups and chocolate are exemplary positive-di'Spit food products.
OEM Applications Manufacturers typically employ GA pumps in filtration equipment, as lubrication uni for large mac
7ery and foam s GA's deptif4 .
'a plus for OEMs.
GA Series Gear Pumps provide high efficiency, pu se free pumping even under the most challenging conditions
C-
General Info UTIOfl
OPERATION
GA double-helical gear pumps utilize precision-machined herringbone gears for smooth, high-efficiency operation.
This family of heavy-duty pumps covers a wide spectrum of requirements:
• Pressures to 500 psi • Flows to 120 gpm • Temperatures to 650°F • Speeds to 1800 rpm • Viscosities to 10,000+ ssu
Shaft and gears are supported at both ends, virtually eliminating shaft deflection, even while accommodating heavy, highly viscous loads.
BENEFITS/ADVANTAGES Ingersoll-Dresser Pumps' GA models are designed and built to outperform industrial pumps of all types. In comparisons with lobe-type, three-screw, vane-type and others, the GA emerges superior:
I Easier to maintain: • Handles higher pressures and viscosities
without special modifications • Has only one seal to maintain • More tolerant of dirt and grit
I Less complex than other pumps: • Direct drive — no gear reduction • Able to run "dry" for short periods —
greater margin for error
I Pulse-free operation
I Lower overall cost
I Uncontested warranty
GA pumps are available nationwide from stock through local distributors.
ength. Loc
North Amerka Sales
East USA Phillipsburg, New Jersey Tel: 800.414.1454
908.859.7000 Fax: 908.859.7890
East Canada Cambridge, Ontario Tel: 519.740.9891 Fax: 519.740.2021
Gulf Coast USA Houston, Texas Tel: 800.414.9434
713.803.4400 Fax: 713.803.4499
Midwest USA Franklin Park, Illinois Tel: 800.414.9434
708.451.3990 Fax: 708.451.3909
West Canada Calgary, Alberta Tel: 403.259.2505 Fax: 403.259.2593
West USA Santa Fe Springs, California Tel: 800.464.0136
310.903.2688 Fax: 310.941.2228
Central and South America Sales
Area Management Houston, Texas Tel: 713.803.4400 Fax: 713.803.4497
Chile and Pen, Santiago Tel: 2.236.1455 Fax: 2.236.1414
Colombia Bogota Tel: 1.285.3547 Fax: 1.285.3845
Mexico Tlalnepantla Tel: 5.390.2517 Fax: 5.390.4031
Venezuela Caracas Tel: 02.239.0068 Fax: 02.239.9761
Europe, Middle East and Africa Sales
Area Management Gateshead, UK Tel: 91.487.5051 Fax: 91.491.5535
Algeria Algiers Tel: 2.56.21.38
2.56.18.34
Austria Brunn Tel: 2236/31530 Fax: 2236/34994
Egypt Cairo Tel: 2.417.30.15
2.417.30.16 2.291.92.38
Fax: 2.662.034
France Paris, France Tel: 1.41.16.21.21 Fax: 1.49.00.03.19
Germany Hamburg Tel: 40.69.689.0 Fax: 40.69.689.243
69.689.310
Iran Tehran Tel: 21.802.9567 Fax: 21.802.9840
Italy Tel: 362.612.433
362 .612 .438 Fax: 362.303.396
Lebanon Beirut Tel: 1.601.781 Fax: 1.601.782
Netherlands Hoofddorp Tel: 2503.40204 Fax: 2503.39702
Roma& Bucharest Tel: 1.638.2384 Fax: 1.312.8370
Russia Moscow Tel: 502.220.3047
502.290.3522 502.203.1715 502.203.0055
Fax: 095.220.3036 095.200.1284
Saudi Arabia Al-Khobar Tel: 3.895.2716
3.898.0028 Fax: 3.895.2716
Spain Madrid Tel: 4.370.995 Fax: 4.377.250
United Arab Emirates Dubai Tel: 4.370.995 Fax: 4.377.250
United Kingdom Croydon, UX Tel: 81.688.77.33 Fax: 81.680.18.07
Asia Pacific Sales
Singapore (covering Philippines, Malaysia, Brunei, Thailand, Indonesia, Vietnam, India & Bangladesh) Tel: 567.7811 Fax: 569.7800
PR China 8, Hong Kong Beijing Tel: 1.499.1859 Fax: 1.493.0969
Japan Tokyo Tel: 03.3732.6121 Fax: 03.3732.6126
Korea Seoul Tel: 02.277.2302 Fax: 02.277.2305
Taiwan Taipei Tel: 2.718.8121 Fax: 2.719.3281
2.718.4260
Parts, Servke & Repairs Sales
East USA Cleveland, Ohio Tel: 800.404.6454
216.642.1494 Fax: 216.642.5741
East Canada Cambridge, Ontario Tel: 519.740.9891 Fax: 519.740.2021
West USA Houston, Texas Tel: 800.694.1118
713.803.4400 Fax: 713.803.4499
West Canada Calgary, Alberta Tel: 403.259.2505 Fax: 403.259.2593
World Headquarters Liberty Corner, New Jersey
USA
Customer Servkes Moosic, Pennsylvania USA
Customer Service Locations Baton Rouge, Louisiana Brantford, Ontario Charlotte, North Carolina Chicago, Illinois Cleveland, Ohio Edmonton, Alberta Fairfield, New Jersey Gateshead, U.K. Greer, South Carolina
Houston, Texas Lakeland, Florida La Mirada, California Pittsburgh, Pennsylvania St. Louis, Missouri Scranton, Pennsylvania Singapore Vancouver, Washington Walpole, Massachusetts
Manufacturing Sites
Argentina Buenos Aires
Austria Brunn
Brazil Rio de Janeiro
Canada Brantford, Ontario
Colombia Mosquera, Cund
Entlkild Gateshead Newark
Fume Arnage Orleans
Germany Hamburg Berlin
Italy Desio Caserta
Spcin Arganda Coslada
USA Chesapeake, Virginia Hastings, Nebraska Huntington Park, California Memphis, Tennessee Phillipsburg, New Jersey Statesville, North Carolina Taneytown, Maryland
Ingersoll-Rand • Padfic • Worthington • Pleuger • Sdenco • Jeumont-Sdmeider Pumps
Representative
Information Center: 253 E. Washington Avenue Washington, NJ 07882
800.728.7867
Ingersoll-Dresser Pumps Nothing contained within this brochure is intended to extend any warranty or representation, expressed or implied, regarding the products described herein. Any such warranties or other terms or conditions of sale of products shall be in accordance with Ingersoll-Dresser Pumps standard terms and conditions of sale for such products, which are available upon request.
Form 75104 © 1995 Ingersoll-Dresser Pump Company Printed in USA
GA Features I ngersoll-Dresser Pumps
Needle Bearings for high performance operation to 500 psi (GAR Series only).
Mechanical Seal for leak-free operation over a wide range of service conditions.
CapScrews for quick and easy pump assembly and disassembly.
Filler Plates for proper sealing under all operating conditions, guar-anteeing casing integrity. . moroNeWma
6.11 1119041A01 11001114111PP1111101110140110111111010 1fill
ndang Features
1011: filfillMODIIIMIM mumilkomilum*Aagillpot„
Herringbone Gears are precision-cut for greater face area, strength and load-carrying capability.
WiffiriligliaMpmmormamm
NOMIDNOWNI" .. U.
immel
Ingersoll-Dresser Pumps
Our Gear Pump Program
Known by the Worthington brand name before becoming part of the Ingersoll-Dresser Pumps family, our gear pumps comprise three basic series, each designed to fill a specific requirement.
• GA Our standard series for flow rates to 120 gpm, pressures to 150 psi, and temperatures to 650°F. The GA Series also includes a modified design, designated the GAR Series, for pressures to 500 psi at flows to 28 gpm.
• GR Our high performance series for flow rates to 1,050 gpm, pressures to 500 psi, and viscosity to 1,000,000 ssu.
• Gearex Our extra heavy-duty series with external timing gears for pump-ing slurries, abrasive materials, and dry running for extended periods of time. For flow rates to 800 gpm, pressures to 300 psi, and viscosities to 1,000,000 ssu.
Form 75105
GA Performance
) ngersoll-Dresser Pum s
GA Quick Selection Charts
Capacity, YP
VISCOMM 100 ssu, 20 tentis okes (Examples No. 1 fuel oil; SAE 30 at 150
Pressure, psi
- 2001)
10 25 50 75 100 150 200 300
1 model 1 GA 1 GA 1 GA 1 GA 1 GA 1 GA 1 GAR 1 GAR 1 GAR hp/rpm V4/900 1/4/900 'A /900 1/4/900 1/4 /900 V4/900 'h /900 Vz /900 1/1200
3 model 1 GA 1 GA 1 GA 1 GA 1 GA 1 GA 1 GAR 1 GAR 1 GAR hp/rpm V4/1800 1/4/1800 1/4/1800 Vz /1800 '/2 /1800 Vz /1800 1/4/1800 1/1800 5/1800
5 model 2 GA 2 GA 2 GA 2 GA 2 GA 2 GA 2 GAR 2 GAR 2 GAR hp/rpm 1/4/1200 1/4/1200 1/4/1200 Vz /1200 1/2/1200 3A /12 00 1/1200 3/1800 5/1800
10 model 3 GA 3 GA 3 GA 3 GA 3 GA 3 GA 3 GAR 3 GAR 3 GAR hp/rpm Vz /1200 Vz /1200 3/4/1200 3/4/1200 1 1/z /1800 2/1800 2/1200 5/1800 7 1/2/1800
15 model 3 GA 3 GA 3 GA 3 GA 3 GA 3 GA 3 GAR 3 GAR 4 GAR hp/rpm 3/4/1800 1/4/1800 1/1800 1'/z /1800 2/1800 3/1800 3/1800 5/1800 10/1800
20 model 4 GA 4 GA 4 GA 4 GA 4 GA 4 GA 4 GAR 4 GAR 4 GAR hp/rpm 1/1800 Ph /1800 2/1800 2/1800 3/1800 5/1800 5/1800 7V2/1800 10/1800
30 model 5 GA 5 GA 5 GA 5 GA 5 GA 5 GA hp/rpm 2/1800 2/1800 3/1800 3/1800 5/1800 5/1800
40 model 5 GA 6 GA 6 GA 6 GA 6 GA 6 GA hp/rpm 2/1800 3/1800 5/1800 5/1800 5/1800 71/4/1800
50 model 6 GA 6 GA 6 GA 6 GA 6 GA hp/rpm 3/1800 3/1800 5/1800 5/1800 5/1800
60 model 7 GA 7 GA 7 GA 7 GA 7 GA hp/rpm 3/1200 3/1200 5/1200 7 1/z/1200 7 1/2/1200
70 model 7 GA 7 GA 7 GA 7 GA 7 GA hp/rpm 3/1200 3/1200 5/1200 10/1800 10/1800 For applications in this range, refer to
80 model 7 GA 7 GA 7 GA 7 GA 7 GA Ingersoll-Dresser Pumps' sales office or hp/rpm 5/1800 5/1800 7 Y2/1800 10/1800 10/1800 distributor.
90 model 7 GA 7 GA 7 GA 7 GA 7 GA hp/rpm 5/1800 5/1800 71/4/1800 10/1800 10/1800
100 model 7 GA 7 GA 7 GA 7 GA 7 GA hp/rpm 5/1800 5/1800 7V2/1800 10/1800 10/1800
C9IHNITY, gp
VISCOSITY: 400 Hu, 90 tentistoke Example: No, 4 fuel oil at 70
Pressure, psi
- 1001; SM 30 at 100 - 130'F)
10 25 50 75 100 150 200 300 500
1 model 1 GA 1 GA 1 GA 1 GA 1 GA 1 GA 1 GAR 1 GAR 1 GAR hp/rpm 1/4/900 1/4/900 1/4/900 1/4/900 1/4/900 1/4/900 'h /900 '/2 /900 1/1200
3 model 1 GA 1 GA 1 GA 1 GA 1 GA 1 GA 1 GAR 1 GAR 1 GAR hp/rpm 1/4/1200 1/4/1800 1/4/1800 1/z/1800 Vz/1800 3/4/1800 1/4/1800 1/1800 2/1800
5 model 2 GA 2 GA 2 GA 2 GA 2 GA 2 GA 2 GAR 2 GAR 2 GAR hp/rpm V4/1200 V3/1200 1/2 /1200 1/4/1200 3/4/1200 1/1200 1'/z/1200 2/1200 3/1200
10 model 3 GA 3 GA 3 GA 3 GA 3 GA 3 GA 3 GAR 3 GAR 3 GAR hp/rpm 1/4 /1200 1/2/1200 3/4/1200 1/1200 1/1200 1 1/2/1200 2/1200 3/1200 7V2/1800
15 model 3 GA 3 GA 3 GA 3 GA 3 GA 3 GA 3 GAR 3 GAR 3 GAR hp/rpm 3/4/1800 1/1800 1'h/1800 1 1/2/1800 2/1800 3/1800 3/1800 5/1800 71/4/1800
20 model 4 GA 4 GA 4 GA 4 GA 4 GA 4 GA 4 GAR 4 GAR 4 GAR hp/rpm 1/1800 Ph /1800 2/1800 2/1800 3/1800 5/1800 5/1800 7'/z/1800 10/1800
30 model 5 GA 5 GA 5 GA 5 GA 5 GA 5 GA hp/rpm 2/1800 2/1800 3/1800 5/1800 5/1800 7V2/1800
40 model 5 GA 6 GA 6 GA 6 GA 6 GA 6 GA hp/rpm 2/1800 3/1800 5/1800 5/1800 71/4/1800 7'/J1800
50 model 6 GA 6 GA 6 GA 6 GA 6 GA 6 GA hp/rpm 3/1800 3/1800 5/1800 5/1800 7 1/z/1800 7 1/z/1800
60 model 7 GA 7 GA 7 GA 7 GA 7 GA hp/rpm 5/1200 5/1200 7 1/2/1200 71/4/1200 10/1200
70 model 7 GA 7 GA 7 GA 7 GA 7 GA hp/rpm 5/1200 5/1200 7'01200 71/4 /1200 15/1800 For applications in this range, refer to
80 model 7 GA 7 GA 7 GA 7 GA 7 GA Ingersoll-Dresser Pumps' sales office or hp/rpm 7 1/2/1800 10/1800 10/1800 15/1800 15/1800 distributor.
90 model 7 GA 7 GA 7 GA 7 GA 7 GA hp/rpm 71/4 /1800 10/1800 10/1800 15/1800 15/1800
100 model 7 GA 7 GA 7 GA 7 GA 7 GA hp/rpm 7 1/2/1800 10/1800 10/1800 15/1800 15/1800
Comity, Ilisv
VISCOSITY: 1,000 ssu, 220 sentistokes (Exam e: Ile. S fuel oil
Pressure, psi
at 951; SAE 30 at BO - 1001)
10 25 50 75 100 150 200 300 500
1 model 1 GA 1 GA 1 GA 1 GA 1 GA 1 GA 1 GAR 1 GAR 1 GAR hp/rpm '/4/900 1/4 /900 'h/900 1/4/900 1/4/900 Vz /900 1/4/900 'h /900 1/900
3 model 1 GA 1 GA 1 GA 1 GA 1 GA 1 GA 1 GAR 1 GAR 1 GAR hp/rpm 1/4/1800 V4/1800 1/4/1800 Y2/1800 1/4 /1800 3/4/1800 1/1800 11/4/1800 2/1800
5 model 2 GA 2 GA 2 GA 2 GA 2 GA 2 GA 2 GAR 2 GAR 2 GAR hp/rpm 'A /1200 'h /1200 'h /1200 1/2 /1200 3/4/1200 1/1200 1'/z/1200 2/1200 3/1200
10 model 3 GA 3 GA 3 GA 3 GA 3 GA 3 GA 3 GAR 3 GAR 3 GAR hp/rpm 1/4/1200 3h /1200 1/1200 1/1200 1 1/2/1200 1'/z/1200 2/1200 3/1200 5/1200
15 model 3 GA 3 GA 3 GA 3 GA 3 GA 3 GA 3 GAR 3 GAR 3 GAR hp/rpm 1/1800 1/1800 1 1/z /1800 2/1800 3/1800 5/1800 5/1800 7'h/1800
20 model 4 GA 4 GA 4 GA 4 GA 4 GA 4 GA 4 GAR 4 GAR 4 GAR hp/rpm 1'/2/1800 2/1800 2/1800 3/1800 3/1800 5/1800 5/1800 7V2/1800 10/1800
30 model 5 GA 5 GA 5 GA 5 GA 5 GA 5 GA hp/rpm 3/1800 3/1800 5/1800 5/1800 5/1800 7'/2/1800
40 model 5 GA 6 GA 6 GA 6 GA 6 GA 6 GA hp/rpm 3/1800 5/1800 5/1800 7 1/2/1800 71/4/1800 10/1800
50 model 7 GA 7 GA 7 GA 7 GA 7 GA hp/rpm 5/900 5/900 5/900 7 1/2/900 7 1/z /900
60 model 7 GA 7 GA 7 GA 7 GA 7 GA hp/rpm 5/1200 7 1/2/1200 71/4/1200 10/1200 10/1200
70 model 7 GA 7 GA 7 GA 7 GA 7 GA hp/rpm 5/1200 71/4/1200 7 1/2/1200 10/1200 10/1200 For applications in this range, refer to
80 model 7 GA 7 GA 7 GA 7 GA 7 GA Ingersoll-Dresser Pumps' sales office or hp/rpm 10/1800 10/1800 15/1800 15/1800 15/1800 distributor.
90 model 7 GA 7 GA 7 GA 7 GA 7 GA hp/rpm 10/1800 10/1800 15/1800 15/1800 15/1800
100 model 7 GA 7 GA 7 GA 7 GA 7 GA hp/rpm 10/1800 10/1800 15/1800 15/1800 15/1800
Caparity, (iPtIl
VISCOSITY: 5,000 sue, 1,100 tentistakes (Examples Ile. 5 feel oil at 601, Bunker
Pressure, psi
C at arr; SAE SO at SO - 100°F)
10 25 SO 75 100 150 200 300 500
1 model 1 GA 1 GA 1 GA 1 GA 1 GA 1 GA 1 GAR 1 GAR 1 GAR hp/rpm 1/4/900 1/2/900 'A /900 V4/900 'A /900 'h/900 'h /900 ' A1900 1/900
3 model 1 GA 1 GA 1 GA 1 GA 1 GA 1 GA 1 GAR 1 GAR 1 GAR hp/rpm 1/4/1200 V4/1200 'h/1200 1h/1200 1/4/1200 Vz /1200 3/4/1200 1/1200 1'/2/1200
5 model 2 GA 2 GA 2 GA 2 GA 2 GA 2 GA 2 GAR 2 GAR 1 GAR hp/rpm 1/z /1200 Vz /1200 3/4/1200 3/4/1200 3/4/1200 1/1200 1'/2/1200 2/1200 3/1200
10 model 3 GA 3 GA 3 GA 3 GA 3 GA 3 GA 3 GAR 3 GAR 3 GAR hp/rpm 1/1200 1'/z /1200 Ph /1200 Ph /1200 1'/2/1200 2/1200 3/1200 5/1200 5/1200
15 model 4 GA 4 GA 4 GA 4 GA 4 GA 4 GA 4 GAR 4 GAR 4 GAR hp/rpm Ph /1200 2/1200 2/1200 3/1200 3/1200 3/1200 3/1200 5/1200 7'h/1200
20 model 5 GA 5 GA 5 GA 5 GA 5 GA 5 GA hp/rpm 1'/1/900 2/900 2/900 3/900 3/900 5/900
30 model 6 GA 6 GA 6 GA 6 GA 6 GA 6 GA hp/rpm 5/1200 5/1200 5/1200 5/1200 71/4/1200 7'h/1200
40 model 7 GA 7 GA 7 GA 7 GA 7 GA hp/rpm 7 1121900 7Vz /900 7 1/2/900 7 1/z /900 10/900
50 model 7 GA 7 GA 7 GA 7 GA 7 GA hp/rpm 71/4 /900 71/2 /900 7 1/2 /900 7' /2/900 10/900
60 model 7 GA 7 GA 7 GA 7 GA 7 GA hp/rpm 10/1200 10/1200 10/1200 15/1200 10/1200
70 model 7 GA 7 GA 7 GA 7 GA 7 GA hp/rpm 10/1200 10/1200 10/1200 15/1200 15/1200 For applications in this range, refer to
80 model Ingersoll-Dresser Pumps' sales office or hp/rpm distributor.
90 model hp/rpm
100 model hp/rpm
Types GA, GAR in selecting rotary pumps, viscosity must be consid- selections for specific conditions listed at four representative vis-ered as well as capacity and head. These charts give rotary pump cosities. The selections have been made for 60-cycle ac motors.
AVAILABLE OPTIONS
Model Sizes
GA • • GAR
•
itto_l A4 ..iWIIPIPMIPIPMINOMPO
Standard Materials and Options
The GA Series is available in seven basic sizes with porting from 1/2" to 2". With many options available, it is easy to custom build a pump for a particular application. These options include:
Monobloc Close-Coupled (Option FT) The mounting end of the pump is changed to allow direct connection through a bracket to a standard C-face motor. No baseplate is required.
Pressure Relief Valve (Option U) This allows short-term emergency bypass to pro-tect the pump and system from over-pressurization in case of a downstream obstruction.
Mechanical Seal (Option M)
High Pressure Design (Option R) For pressures above 150 psi, this option includes needle bearings and a modified casing to allow pressures to 500 psi. (Sizes 1 - 4 only)
Carbon Sleeve Bushings (Option D) The carbon sleeve bushings are inherently self-lubricating to extend component life when handling low lubricity fluids.
Inboard Bearing (Option MI)
With a mechanical seal, the inboard bearing pre-vents shaft deflection when using a chain or belt drive arrangement.
High Temperature Design (Option Y) For fluids above 350°F, this option includes special gas-kets, bushings, packing and seals to allow tempera-tures to 650°F.(Packing version shown)
To ensure positive shaft sealing with a minimum of leakage. Field conver-sion of packed pumps to mechanical seals is easily accomplished as well.
MATERIALS OF CONSTRUCTION
Item GA Series GAR Series
Cast iron Cast iron Alloy iron Carbon steel Cast iron N/A All steel Graphited Teflon or synthetic fiber Carbon on cast iron faces, Buna N elastomers, all else steel
Cast iron Cast iron Nodular iron Carbon steel Cast iron Cast iron N/A Graphited Teflon or synthetic fiber Carbon on cast iron faces, Buna N rubber bellows, all else steel
Mounting bracket Casing Gears Shafts Stuffing Box Gland Wear Plates Relief Valve Assembly Packing
Mechanical Seal
Form 75106
GA Diagrams I Ingersoll-Dresser Pumps
SUCTION & DISCHARGE PIPE TAP
SUCTION & DISCHARGE PIPE TAPS
od dbc
x h HOLES
Type GA Rotary Pumps
Pump Size a b d I m a P u y z cannettionsize
1 GA 3.11 3.94 1.81 1.62 3.56 1.00 2.38 0.56 0.68 2.75 0.31 1.06 1/2NPT
2 GA 4.21 4.25 2.33 2.12 4.62 1.25 3.00 0.62 0.50 3.38 0.06 0.94 1/4 NPT
3 GA 4.31 5.50 2.88 2.75 5.69 1.50 3.88 0.75 1.06 3.25 0.44 1.69 1 NPT
4 GA 4.94 5.50 2.88 2.75 5.69 1.50 3.88 0.75 1.06 3.25 0.44 1.69 1 NPT
5 GA 5.88 6.00 3.55 3.25 7.06 2.12 4.75 0.87 0.88 4.25 0.12 1.62 1 1/2 NPT
6 GA 6.62 6.00 3.55 3.25 7.06 2.12 4.75 0.87 0.88 4.25 0.12 1.62 1'/2NPT
7 GA 4.75 10.06 4.62 3.88 8.81 2.12 6.12 0.87 4.25 2.81 3.50 5.00 2 NPT
Type GAFT Rotary Pumps
Flange
1 GAFT 3.50 0.56 0.561 2.50 2.75 7.88 2.19 0.81 1.81 1.19 4.874 4.19 1/2NPT ,
2 GAFT 4.50 0.66 0.624 2.50 3.38 9.31 2.62 1.00 2.38 1.25 4.874 4.19 5/4NPT
3 GAFT 5.58 1.00 0.749 2.50 3.25 9.88 3.00 1.38 2.75 1.38 4.874 4.19 1 NPT
4 GAFT 5.58 1.00 0.749 2.50 3.25 10.50 3.00 1.38 2.75 1.38 4.874 4.19 1 NPT
5 GAFT 6.94 1.20 0.874 3.00 4.25 11.88 3.00 - - 6.872 6.18 1 1/2NPT
6 GAFT 6.94 1.20 0.874 3.00 4.25 12.62 3.00 - - 6.872 6.18 1 1/2 NPT
7 GAFT 8.38 1.50 0.874 3.00 2.81 14.81 7.06 - - - 6.872 6.18 2 NPT
Form 75107
Worthington pumps or OEM services
DRESSER PUMP
Worthington: Industry's broadest selection of pumps for original
cc
equipment manufacturers. Dresser offers you the widest variety of Worthington centrifugal and rotary pumps, single-stage and multi-stage, to fill your precise needs without compromise.
Our application experts fully understand the capabilities of our pumps. With their background, they can select the correct model, size, materials, impeller trim, sealing, etc. to fit your needs efficiently. The broad range of models, sizes, materials, etc. make a perfect match. All are thoroughly engineered with state-of-the-art equipment and procedures. And, all are thoroughly field-proven in thousands of applications in every variety of industry. You have assurance that you will receive the correct pump for each application.
Manufacturing is performed to the highest standards of quality assurance.
With our large inventory of units and parts, and the ability to fine-tune our production, you can be assured we can serve your continu-ing and recurring delivery requirements to your satisfaction.
To further serve our OEM customers, our worldwide network of qualified distributors are also available to you. They, too, carry inventories of units and parts, and have the ability to establish special stocking and delivery programs according to your schedules.
Typical Applications OEM Industrial dishwashers Industrial laundry equipment Cooking oil filtration Package irrigation systems Lease automated custody transfer
(LACT) units Heat transfer equipment Air scrubber systems Water purification & filtration Reverse osmosis High pressure washdown packages Main & auxiliary oil circulation
packages Hospital & laboratory sterilization
systems Package boiler feed systems Packaged cooling tower systems Corn processing systems Polystyrene extrusion systems Portable oil scrubber systems Evaporator packages Steam cleaner systems
Photos— Upper Left Worthington pumps are designed utilizing the latest state-of-the-art engineering techniques that assure the utmost in product reliability. CAD (Computer Assisted Design), FEM (Finite Element Method) are but two of the tools that assist our engineers in their efforts to build efficiency and reliability into every product.
Left Center The Chesapeake plant maintains extensive inventories of complete units and parts to assure prompt delivery to customers and distributors.
Lower Left Chesapeake not only maintains a large inventory of parts, but also utilizes part of the plant as a 'quick' response center. This allows us to machine parts on an emergency basis to meet customers' requirements.
D-800 cast iron centrifuga . 1)
D-500
n
• Capacities to 1200 gpm • Heads to 650 ft. O 1 to 60 HP O ANSI liquid end • NEMA standard motors O Low NPSH inducer options
• Capacities to 800 gpm O Heads to 300 feet O Greater corrosion resistance O Single mechanical seals
Worthington D-800 pumps available in frame mounted (D-814) or in the close coupled (0-824) (horizontal, and vertical in-line D-834) configurations, offer you 19 sizes with capacities to 1500 gpm, heads to 400 feet, in sizes from 1" through 4". Applicable for pumping water and a variety of other fluids including solvents, light oils, non-corrosive chemicals, coolants and brine, the 0-800 is a line of cast iron, end suction pumps designed with a combination of features that ensure long-term reliability, high efficiency and ease of maintenance.
0-800's back pull-out design allows for easy maintenance by providing access to internal pump components, and its top centerline discharge arrangement eliminates air entrapment and bending moments on pump supports, and simplifies piping layout. Other 0-800 features include:
Capacities to 1500 gpm Heads to 400 feet Discharge sizes 1 to 4 inches
O Efficient closed impellers • Pre-set mechanical seal
Worthington 0-511/512 and 0-520 end-suction pumps represent a highly standardized line, engineered to meet a broad range of commercial and industrial services. Available in close-coupled or frame-mounted models with either threaded connections (C.I.) or flanged connections (316 S.S.), the pumps are designed for durability, efficiency and economy.
Closed-impeller design offers high efficiencies across a broad range covering 1/3 to 3 HP. Closed-iMpellers also eliminate the need for troublesome clearance adjustments.
Frame-mounted (D-510) and close-coupled (D-520) Sizes 1 to 1-1/2 inch Capacities to 175 gpm
- Heads to 110 feet Cast iron and stainless steel Centerline discharge — back pull-out design
C
DSS-800 rolled stainless c, D-1093194 dose-coup "1.04111111if
cc The cold rolled stainless steel used in the casing, impeller and stuffing box cover of the DSS-800 pump offer greater corrosion resistance, and is ideal for application for a wide range of process liquids. The stainless steel components are made of Cr Ni Mo which is more elastic than cast metal. The casing is approximately 7mm thick and is further compression-hardened during the deep drawing process.
Worthington 0-1093/94 pumps utilize the same casings, impellers and stuffing boxes as the Worthington 0-1091. The pump is a close-coupled design, requiring only as much as half the space as the frame-mounted counterpart. It features standard ductile or modular iron construction, assuring extended life in the most difficult applications. All 316 stainless steel construction is also available. Standard NEMA, motors, readily available from a variety of manufac-turers are standard. The close-coupled design requires no final coupling alignment and requires no bearing frame or coupling maintenance during operation.
C C GA/GR heavy duty rotary pumps
WD low flow, high head, multi-stage ring section pumps DP-900 non-metallic chemical pumps
Worthington DP-900 non-metallic pumps have been designed in full accordance with ANSI B73.1 specifications. They've been engineered and constructed to withstand corrosion from a wide range of liquids. They are hydraulically efficient, impact resistant and have excellent mechanical strength.
Most DP-900 major parts are constructed of our corrosion resistant reinforced epoxy resin materials.
• Capacities to 400 gpm • Heads to 450 feet • Meets ANSI B73.1 specs • Integral impeller/sleeve combination • Wide variety of sealing options
Specially developed for high-pressure, low-flow applications, Worthington's WD multi-stage ring-section pump optimizes hydraulic performance, conserves energy, minimizes the cost of the driver and reduces maintenance. A completely modular pump, it is quickly assembled from a varying number of identical stages - up to 16 as a practical limit - to closely match the requirements of each specific application.
Designed for low NPSH requirements, (lower still with its optional first-stage inducer), the WD reduces system costs by minimizing piping and suction tank requirements, and eliminating wasteful "pump and motor oversizing." The WD's design (it allows for flexible positioning of the suction
and discharge flanges independently of each other) and its compact size make it an excellent choice where space is limited and headroom at a premium, as in many OEM applications.
• Heads to 1600 feet • Capacities to 400 gpm • High efficiency • Up to 16 stages • Low NPSH - optional inducer • Alternate nozzle positions
Worthington's LR line offers you 29 horizontal sizes from 1-1/2" through 10". They provide a wider range of hydraulic coverage than other typical horizontal split-case pumps and end-suction designs. Split-case pumps minimize the effects of radial load by allowing the radial thrust to be shared equally by the bearings at each end of the shaft.
The Worthington split-case line is a single-stage, double-suction impeller design. Double-suction impellers offer two advantages: reduced NPSH requirements up to 30%, and balanced axial thrust for longer bearing life.
The model LLR, single-suction, two-stage designs are available in 1-1/2-4" sizes. They feature two single-suction impellers placed back-to-back to minimize axial thrust. Radial thrust is balanced through the use of opposed volutes. Impellers are firmly secured to the shaft by use of a key and nut.
• Capacities to 19,000 gpm • Heads to 1000 feet • Sizes 1-1/2 to 10 inches • Type LR - single-stage • Type LLR - two-stage • Closed double-suction impeller
Worthington GA/GR pumps are simple external gear designs with only two moving parts to ensure long life and ease of maintenance. They are capable of handling a variety of liquids and varied conditions of service.
Worthington GA/GR pumps feature double helical or herringbone gear teeth which provide maximum face area allowing better load-carrying ability, greater strength and minimum hydraulic shock.
The smaller-capacity rotaries are often incorporated as vital parts of larger machines or pumping units: oil burners, oil filtration systems, oil transfer assemblies, lube oil consoles, machine tools, laundry equipment, packaging machinery
(including hot-melt process), diesel engines, gear reducers, pressure spray outfits, hydraulic systems, and for lube, fuel or bilge pumping on smaller marine craft.
• Pressures to 500 p.s.i. • Capacities to 1100 gpm • GR sizes 1-1/2 to 6 inches • Smooth running herringbone gears • Temperatures to: GA 450 F; GR 500 F • GA - flange and frame-mounted,
belt-drive option • GR - direct drive
LR/LLR centrifugal horizontal split-case pumps
Your Local Contact Is:
ORESEP PUIVIP (IY-RESS-72)
Dresser Pump Division Dresser industries, Inc. 815 Live Oak Drive Chesapeake, VA 23320
2011-B1 790 TPC
Worldwide distribution assures availability of pumps, parts and service.
An extensive network of Dresser Pump sales offices and Worthington pump distributors, located in every major trading area, is your assurance that there is a Dresser Pump, Worthington representative near you for prompt, local service when you need it.
Worthington pump distributors are factory trained specialists in pumping equipment. They can offer you expert assistance on pump application, selection, installation, operation, and maintenance.
Local availability is another benefit of selecting and using Worthington pumps. Worthington distributors carry large inventories of pumps and parts. In most cases, immediate shipment can be assured. And service is always nearby for prompt reaction to your specific needs.
You can locate the Dresser Pump sales office or Worthington distributor in your area by consulting your local telephone directory.