g10 sq4 - four-step sequencer

1
G10 ETA Line Building Automation Products, Inc. • 750 North Royal Avenue, Gays Mills, WI 54631 USA Tel: +1-608-735-4800 • Fax: +1-608-735-4804 • Email: [email protected] • Web: www.bapihvac.com SQ4 - Four-Step Sequencer Overview SQ4RA - Four-Step Sequence Module The high cost of energy today makes proportional control of HVAC systems a necessity, not a luxury. With proportional control you use only the energy needed to get the job done. Proportional control is easy for water valves and air dampers, but more complex and cost prohibitive for electric heat units, fans and refrigeration systems. The SQ4 module simplifies the job by sequencing multiple on-off devices based on a single analog output from the controller. Now items such as cooling towers with multiple two-speed fans, staged electric heat units and multi-compressor chillers can be controlled to provide the utmost efficiency and consistency for the load at hand – all at a reasonable price. Each SQ4 module provides four NO/NC output relays that trigger at four fixed voltages across the 0-5 or 0-10 control voltage range. Two SQ4 modules can be cascaded to provide eight independent output stages. When closed, each output relay provides 24 VDC at 120 mA. In addition, sequencer modules are available that provide a rotational sequence as well as contact monitoring and alarm output. Part Number Description BA/SQ4 .................. 4-Step Sequence Module BA/SQ4-R .............. 4-Step Sequence Module Specifications SQ4 plugged into a BP4 Backplane BP8 or BP4 Interface Backplane (p. G16) Associated Products Power Voltage: 26 to 36 VDC Power Current: 50 mA max. plus output (1.7 VA max plus output ) Input Control Voltage: 0 to 5 or 0 to 10 VDC Output Power Voltage: Nominal 24 VDC (23 to 32 VDC) Output Power Current: 4 outputs of 120 mA max. (12 Watts total) Part Number Description BA/SQ4-A .............. 4-Step Sequence Module (with Alarm) BA/SQ4-RA............ 4-Step Sequence Module (Rotational with Alarm) (Rotational) PS17 or PS17CB Power Supply (p. G19) TRK18 Snaptrack (p. G18) Rev. 10/16/12

Upload: others

Post on 28-Dec-2021

7 views

Category:

Documents


0 download

TRANSCRIPT

Page 1: G10 SQ4 - Four-Step Sequencer

G10ETA Line

Building Automation Products, Inc. • 750 North Royal Avenue, Gays Mills, WI 54631 USATel: +1-608-735-4800 • Fax: +1-608-735-4804 • Email: [email protected] • Web: www.bapihvac.com

SQ4 - Four-Step Sequencer

Overview

SQ4RA - Four-Step Sequence Module

The high cost of energy today makes proportional control of HVAC systems a necessity, not a luxury. With proportional control you use only the energy needed to get the job done.

Proportional control is easy for water valves and air dampers, but more complex and cost prohibitive for electric heat units, fans and refrigeration systems. The SQ4 module simplifi es the job by sequencing multiple on-off devices based on a single analog output from the controller. Now items such as cooling towers with multiple two-speed fans, staged electric heat units and multi-compressor chillers can be controlled to provide the utmost effi ciency and consistency for the load at hand – all at a reasonable price.

Each SQ4 module provides four NO/NC output relays that trigger at four fi xed voltages across the 0-5 or 0-10 control voltage range. Two SQ4 modules can be cascaded to provide eight independent output stages. When closed, each output relay provides 24 VDC at 120 mA. In addition, sequencer modules are available that provide a rotational sequence as well as contact monitoring and alarm output.

Part Number DescriptionBA/SQ4 ..................4-Step Sequence ModuleBA/SQ4-R ..............4-Step Sequence Module

Specifi cationsSQ4 plugged into a BP4 Backplane

BP8 or BP4Interface Backplane

(p. G16)

Associated Products

Power Voltage: 26 to 36 VDCPower Current: 50 mA max. plus output

(1.7 VA max plus output )Input Control Voltage:

0 to 5 or 0 to 10 VDCOutput Power Voltage:

Nominal 24 VDC (23 to 32 VDC)Output Power Current:

4 outputs of 120 mA max.(12 Watts total)

Part Number DescriptionBA/SQ4-A ..............4-Step Sequence Module

(with Alarm)BA/SQ4-RA ............4-Step Sequence Module

(Rotational with Alarm)

SQ4RA - Four-Step

BP8 or BP4Interface Backplane

(p. G16)

(Rotational)

PS17 or PS17CBPower Supply

(p. G19)

TRK18 Snaptrack (p. G18)

Rev. 10/16/12