furnitubes - litters and waste brochure

RAILINGS BROCHURE

© 2012 Copyright Reproduction Prohibited

TEL 020 8378 3200FAX 020 8378 3250fuRnitubes .com

108R

AIL

ING

S▼

LIN

X T

raffo

rd R

ailin

g (s

peci

al c

omm

issio

n) in

stal

led

at b

right

on m

arin

a

TEL 020 8378 3200FAX 020 8378 3250fuRnitubes .com© 2012 Copyright Reproduction Prohibited

Ent

er s

peci

fic to

pic

here

1093RAILINGS

Where the proximity of pedestrians to traffic could prove hazardous, guardrails are a cost effective, proven way of reducing the chance of tragic accidents.

furnitubes offer an extensive range of post & rail systems, from simple and economic utilitarian steel railings to ornate cast iron designs that are ideal for traditional sites. furnitubes also offer a full design service that enables new and bespoke designs to be developed in collaboration with architects and local authorities.

Railings Introduction 110

Selecting a Rail System 112

Linx™ Railing Systems 114

Stretford & Romney

Composite Rail 126

Harrington & Hackney

Steel Railings 129

PGRM Steel Barriers 132

OKR Pedestrian Barrier 133

HKR Pedestrian Barrier 134

Sockets For Steel Posts 135

Cast Iron Railings 136

Special Commissions 140

Gates 142



110R

AIL

ING

S

EXTENSIVE RANGE OF RAILING SYSTEMSour extensive range includes systems that can be utilised to co-ordinate stretches of the highway with combinations of full, 3/4 or 1/2 guardrail, 3-rail, 2-rail, and knee rail configurations. the streetscape can be further enhanced by the selection of matching bollards, designed to complement our guardrails.

RAILINGSintroduction

the simple specif ication of guardrails besidea busy main road or outside a school can mean the difference between a safe, controlled highway or an accident black spot.

furnitubes international has been at the forefront of guardrail provision throughout the uK since it was established over sixty years ago.

▲ LINX 100 ¾ GUARDRAILKnightsbridge Postinstalled at Loughton, essex

▲ MARINE 2-RAILas supplied to ealing, London

▲ LINX 100 FULL GUARDRAILeuston Postinstalled at new cross, London


111

Rai

lings

Intr

oduc

tion

CUSTOMISATIONmany of our composite systems can be customised by the mixing and matching of cap and base castings. Post features can be fur ther emphasised by highlighting in contrasting colours.

our sales team will be happy to advise on ways in which each system can be adapted where areas demand special considerations, for example high visibility panels at a pedestrian crossing or differing heights of rail where the ground level is uneven.

LINX™ RAILING SYSTEMfurnitubes modernised the railing system with the introduction of their new generation Linx system - an astonishing, simple revolution in railing design and installation. the Linx’s unique post to panel connection enables modular panels to be f itted and adjusted on site, to a variety of radii and height levels. - see pages 114-125 for more information.

▲ ROCHESTERpost detail

▲ HARRINGTON ¾ GUARDRAILas supplied to Lb Hackney

▲ ROCHESTER 3/4 GUARDRAILhigh visibility panelas supplied to thameside terminal, cliffe, Rochester

▲ LINX 400 3-Railinstalled in Hammersmith, London

▲ LINX 300 2-Raileuston postinstalled at Ashvale canal bridge, Aldershot



112R

AIL

ING

S

As well as selecting a guardrail design for aesthetic reasons, it is important to consider how the chosen system will f it the proposed site. it is unlikely that any site is actually f lat and that only straight runs of guardrail will be required - sites usually include hills, bends and awkward junctions around pedestrian crossings etc.

overall site curve or changes in angle achieved by straight rail segments

‘Horizontal’ members follow pavement incline

Horizontal members are plumb level side view

Guardrail TypeSiTe CondiTion

inclined stepped

side view


inclined raked

plan view


curved (or anGled)

segmented

Rails are radiused so concentric to kerb

note: in all situations, posts and vertical panel inf ill bars are manufactured to be installed plumb vertical. We do not recommend that guardrail is installed with the posts perpendicular to an inclined site, i.e. not true vertical.

plan view


curved (or anGled)

radiused

STep 1: aSSeSS The SiTe

seLectinG An APPRoPRiAte RAiLinG sYstem

Guardrail may need to accommodate either inclines or a curved (or angled) kerb line, or a combination of both, as illustrated below. the table on the next page helps with the selection of the correct guardrail to overcome these site variables.


113

Sel

ectin

g an

App

ropr

iate

Rai

l Sys

tem

STraiGhT

STraiGhT

STraiGhT

Curved (or anGled)

Curved (or anGled)

Curved (or anGled)

Curved (or anGled)

Curved (or anGled)

STraiGhT

STraiGhT

STraiGhT

SeGmenTed

radiuSed

SeGmenTed

radiuSed

radiuSed

site conditions(refer to illustrations on pg 112)

guardrail type(refer to illustrations on pg 112)

guardrail system (refer to index below for full product range available)

further technical information on individual guardrail systems is available on request, including details of the maximum incline and minimum radius that can be achieved by standard components.

side

view

plan

view

level

inClined

inClined

level

level

inClined

inClined

inClined

plan

view

side

view

level

STepped

raked

level

level

STepped

raked

STepped

linx romneyharrG’TnhaCkneyCaST iron

STreTfordokrhkr

pGrm

STandard STandard STandard STandard

key/explanation guardrail system index

these are common components, and may be held as stock items.

linx 100linx 200linx 300linx 400

pgs 114 - 120, 125pgs 114 - 121, 125pgs 114 - 123, 125pgs 114 - 124

okr & hkrSTreTford 115STreTford 75

pg 133 - 134pgs 126 - 127pgs 126 - 127

romneyharrinGTon haCkneyCaST iron ranGeS

pgs 126 - 128pgs 129 - 131pgs 129 - 131pgs 136 - 139

pGrm pg 132

these components are made to order, to precisely f it the site. site survey information (spot heights and relative positions of posts) is therefore required before manufacture can be commenced.

As the table below demonstrates, some guardrail systems f it certain site conditions better than others and we recommend that you carefully consider which system is the most appropriate when making your selection.

Guardrail not available in this configuration.

STandard opTion n/a STandard

n/a n/a opTion n/a

STandard STandard n/a STandard

opTion opTion opTion n/a

STandard opTion n/a STandard

n/a n/a opTion n/a

opTion opTion n/a n/a

linx

okrhkrSTreTford

romneyharrG’TnhaCkneyCaST iron

pGrm

opTion

STandard

n/a

STep 2: ChooSe a SySTem

STep 3: CheCk viSiBiliTyPANELTYPE PANEL LAYOUT

OPTIMUMSIGHT ANGLE WHERE USED

V2 2.5° TO 5° STRAIGHT ROADSMODERATE SPEEDS

V4 5° TO 14° BENDS.SLOW SPEEDS

V8 MORE THAN 14° BELLMOUTHS. SITE WHEREVISIBILITYIS NOT THE MAIN REQUIREMENT

if the guardrail that you select will f it your site with ‘standard’ components only, this will shorten manufacturing lead times and generally speaking will be more cost effective. Also, spare components can be held in stock for replacement purposes at immediate notice rather than made to order - minimising inconvenience and vastly reducing maintenance costs.for a guardrail that requires special components, i.e. those denoted as ‘options’ in the table below, the opposite may apply.



114R

AIL

ING

S

• straight runs

for years, the technology surrounding guardrail systems has remained unchanged. in response to increased demand for safety on the highway, furnitubes have designed and developed the patented Linx railing system - an astonishing, simple revolution in guardrail design and installation.

The linx system:

■ utilises standard components

■ doesn’t require radiused panels

■ requires minimal site survey

■ suitable for almost every site

■ available in a range of options

■ 100% recyclable

linx2

00se

ries

linx3

00se

ries

linx1

00se

ries

linx3

00se

ries

the Linx railing system has been designed with every customer in mind, for installation in almost every situation with only a minimal site survey requirement.the Linx’s unique post to panel connection enables modular panels to be fitted and adjusted on site, to a variety of radii and height levels. the modular design also enables clients to keep a ready stock of spare panels for instant replacement should any of the railing system be damaged.

in addition to the standard rectangular rail of the Linx 100 and 200, the Linx 300 and Linx 400 offers a circular rail for more decorative applications.

linxRAiLinGTm

• gradients

• bends, corners

• & all combinations

composite railing system


115

Linx

™ R

ailin

g

As a means of improving the line-of-sight between drivers and pedestrians, and increasing safety, furnitubes offer a variety of High Visibility options for Linx panels and posts.

Those involved in specifying and installing guardrail are all too aware of the inflexibility of most systems. the necessity for a full site survey and the manufacture of 'special' components and 'one-offs' to suit specific site conditions is time-consuming and expensive. furthermore, if replacement sections are required after an accident has occurred, the exact damaged components need to be identified and new 'special' components manufactured. this inevitably results in the site being left in disrepair for a long period of time.

linxRAiLinGTm

explained

the Linx range comprises 4 basic series, based on different post and horizontal bar sections and sizes. in each series the post can be fitted with a choice of top caps and collars that enable countless decorative combinations.

the modular design also allows clients to keep a ready stock of spare panels for instant replacement should any of the railing system be damaged.

100 series 200 series 300 series

cast cap variations

linx100 Knightsbridge cap

linx100 trafford cap

linx100 Hale cap

linx100 Ashton cap

linx100 euston cap

The Linx railing system range is a complete solution. the unique, patented post-to-panel connections of the Linx enables standard straight panels to be adjusted in angle and height on site, to suit a variety of curves, bends, junctions and levels.

iT’S So Simple iT’S BrillianT!

▲ LINX 300 3/4 GUARDRAILKnightsbridge post

▲ LINX 100 VISI-POSTS with V2 High Visibility Raileuston post and base collarinstalled at Deptford broadway, London

400 series



116R

AIL

ING

S

the following images are taken from a workshop demonstration of the step-by-step assembly sequence for the Linx 100 series patented bracket connection, showing how variable angles and heights can be achieved with standard posts and panels, and therefore how standard components can be used for virtually all sites.

The complete video from which these stills have been taken is available on video CD-ROM. Please contact a member of Furnitubes sales team to request a free copy.

the video cD also contains additional footage of the Linx 100 series during site assembly and of a number of completed installations.

* note: the post shown here is a Linx 100 ‘High Visibility’ post (with sight gap) which requires all brackets to be bolted to the post on site in order to adjust the precise rotation of the post cut-out gap section. the rotation angle of non-visirail posts (without gap) is not important, and brackets are supplied pre-fixed on one side of the post.

FITTING THE BRACKETthe bracket is shaped to suit the post diameter and is fastened by a simple bolt connection to the previously fixed rivnut.

THE BRACKETthe bracket now forms a solid connection on the post. the fixing shown here will be hidden when the railing panel is attached.

OFFERING UP THE RAILINGSthe railing panel, or individual rail is loosely attached to the bracket by the supplied fixings until final adjustment is made.

SECURING THE RAILINGSA small degree of lateral adjustment is achieved by means of the slot in the bracket. once in the correct position, fixings are tightened so the post and panel or rail form a combined solid structure.

THE NEXT PANEL...the bracket is positioned on the post at an angle and height to suit the position of the next post in the line of railings and the assembly sequence as described above is repeated.

THE ASSEMBLY KITAll brackets and fixings are supplied as standard. the only specialist item required is the rivnut tool, available from furnitubes at a nominal price.

MARKING THE BRACKETSWhen the height and angle of the railing has been determined, hole centres for the fixing brackets are marked and centre punched.

DRILLING THE POSTA 12mm diameter hole is drilled through the wall of the post at the marked positions.

THE RIVNUTAs the name suggests, a rivnut is a combination of a rivet and a nut - essentially a rivet that has an internal thread and is shown here being fitted to the rivnut tool with an m10 mandrel.

FITTING THE RIVNUTthe rivnut is fitted to the post via the previously drilled hole and tightened by means of a spanner and rivnut tool. the rivnut now forms a threaded insert onto which a bracket can be securely attached.

* ALL DesiGns incoRPoRAtinG tHe LinX RAiLinG sYstem,

WitH oR WitHout suRfAce DecoRAtion, ARe PRotecteD

bY PAtent no. 2310441 coPYRiGHt / DesiGn RiGHt 1995.

linxRAiLinGTm

installation

bollards pg 46 gates pg 143parking pg 98

RAnGe

litter pg 253


117

Linx

™ R

ailin

g

STAINLESS STEEL OPTIONSthe striking, clean-cut look of stainless steel makes it an ideal material for modern eye-catching designs. stainless steel is also extremely hardwearing, corrosion resistant, 100% recyclable and does not require a protective coating. instead it can be polished to either a satin or bright mirror finish.

in addition to its versatility for coping with site variations, the Linx system has also been adapted with a number of unique stainless steel cap designs. furnitubes worked with Haringey council to achieve a double-ringed variation of the Linx 200. the stainless steel cap complements the architectural Art Deco features of the nearby London underground station.

other variations include a single-neck Kenton-style cap and an Ashton cap in stainless steel. to discuss other possibilities please call a member of our dedicated design team.

linxRAiLinG

◄ LINX 300 Railing and Gate with FB14 Padlockwith Ashton stainless steel cap(see page 143 for gate options)

▲ LINX 100with Kenton single-neck stainless steel capwith etched graphics (special commission)shown here in Walthamstow

◄▼ LINX 200with stainless steel capsupplied to Wood Green, London



118▼

LIN

X 4

00 ¾

GU

AR

DR

AIL

sat

in p

olish

ed s

tain

less

ste

el, i

nsta

lled

at H

amm

ersm

ith, L

ondo

n


119

Linx

™ R

ailin

g

▲ LINX 400 2-Rail (special commission)stainless steel, glass bead blast finishinstalled in Hammersmith, London

▲ LINX 400 3-Railstainless steel, glass bead blast finishinstalled in Hammersmith, London

linxRAiLinGTm

composite railing system

the contemporary stainless steel Linx 400 guardrail system is a new addition to furnitubes revolutionary Linx range.

the stylish Linx 400 railing system is an ideal solution for modern areas, which can be enhanced with this sleek and flexible railing system, available in 100% stainless steel.

NO BRACKETSsimple in design, the rails are attached to unique curved plates which fit flush onto the posts in any position or angle. several options and combinations are available, including different material and cap options.

▲ KENTON CAPdetail

400 series

EXPLODED ASSEMBLYno BraCkeTS

Panels bolt straight onto the post, using riv-nuts and dome head bolts

SeCuriTy BolT

riv-nuT

STainleSS STeel kenTon Cap

poWder CoaTed poST & railinG

STainleSS STeel poST & railinG

OPTIONS■ mild steel, galvanised

■ powder coated mild steel

■ satin polished stainless steel

■ bright polished stainless steel

■ glass bead blast stainless steel

► LINX 400 ¾ GUARDRAILfinish options



120R

AIL

ING

S

fRont eLeVAtion & GRounD LeVeL section 1:25

Product codes are in bold type. Dimensions are in mm, are approximate and do not form any part of the contract.

We reserve the right to change the design and specification on any item offered and, where possible, notification will be made.

linx 100 guardrail range

euston post

lep 100 Fintermediate/corner Post for full Guardrail Panel

lep 100 Qintermediate/corner Post for 3/4 Guardrail Panel

options:end Post

knightsbridge post

lkp 100 Fintermediate/corner Post for full Guardrail Panel

lkp 100 Qintermediate/corner Post for 3/4 Guardrail Panel

options:end Post

ashton post

lap 100 Fintermediate/corner Post for full Guardrail Panel

lap 100 Qintermediate/corner Post for 3/4 Guardrail Panel

options:end Post

hale post

lHp 100 Fintermediate/corner Post for full Guardrail Panel

lHp 100 Qintermediate/corner Post for 3/4 Guardrail Panel

options:end Post

trafford post

ltp 100 Fintermediate/corner Post for full Guardrail Panel

ltp 100 Qintermediate/corner Post for 3/4 Guardrail Panel

options:end Post


euston base collar

eB 100

full guardrail panel

lFr 100 Panel for 2m post pitch60 x 40 horizontal railsØ16 vertical infill bars

options:High Visibility PanelHigh Visibility PostRadiused Panel

trafford base collar

tB 100

3/4 guardrail panel

lQr 100 Panel & Rail for 2m post pitch60 x 40 horizontal railsØ16 vertical infill bars

options:High Visibility PanelHigh Visibility PostRadiused Panel & Rail

additional joint assembly

lBr 100 Galvanised steel bracket complete with fixings

TeChniCal

materialfurnitubes cast iron and steel railings are 100% recyclable.

Suitabilitybefore making your final guardrail or post & rail selection please refer to ‘selecting an Appropriate Rail system’ notes on pages 112-113.

patent protectionAll designs incorporating the LinX railing system, with or without surface decoration, are protected by Patent no. 2310441.copyright/Design Right 1995.

product heightsDimensions shown apply to installations in level ground only and will vary for non-level (inclined) sites.

materials & finishPosts and panels are manufactured in steel and supplied in a galvanised finish as standard.

Post caps & collars are in cast iron and supplied in a primed finish.We recommend that top coats are applied on site after installation.

3 & 4 Way postsintermediate & end posts are supplied complete with all necessary joint assemblies & fixings.

to convert an intermediate post to a 3-way post, the following number of additional joint assemblies are required:full panel - 2 joints 3/4 panel - 3 joints.


Ø 115

Ø 115

Ø 115

375

1200

Ø 115

375

1270

Ø 115

Ø 155

150

1090

Ø 200

150

1090

375

1180

375

1275

375

1200

linx 100 series


121

Linx

™ R

ailin

g

1:25 fRont eLeVAtion & GRounD LeVeL section



TeChniCal






Post caps & collars are in cast iron and supplied in a primed finish.We recommend that top coats are applied on site after installation.





euston post



options:end Post

knightsbridge post



options:end Post

ashton post



options:end Post

hale post



options:end Post

trafford post



options:end Post


euston base collar

eB 200


lFr 200 Panel for 2m post pitch60 x 40 horizontal railsØ16 vertical infill bars

options:Radiused Panel


tB 200

3/4 guardrail panel

lQr 200 Panel & Rail for 2m post pitch60 x 40 horizontal railsØ16 vertical infill bars

options:Radiused Panel & Rail


lBr 200 Galvanised steel bracket complete with fixings

375

1160

Ø 75

375

1170

Ø 75

375

1170

Ø 75

375

1220

Ø 75

375

1220

Ø 75

Ø 145Ø 115

150

1090

150

1090

linx 200 series



122R

AIL

ING

S




knightsbridge post



options:end Post

ashton post



options:end Post

hale post



options:end Post

trafford post



options:end Post


euston post



options:end Post


euston base collar

eB 100


lFr 300 Panel for 2m post pitchØ48 horizontal railsØ16 vertical infill bars

options:Radiused Panel

trafford base collar tB 100

3/4 guardrail panel

lQr 300 Panel & Rail for 2m post pitchØ48 horizontal railsØ16 vertical infill bars


lBr 300 cast bronze bracket complete with fixings

375

1180

375

1275

Ø 115

Ø 115

375

1200

Ø 115

375

1200

Ø 115

375

1270

Ø 115

Ø 200Ø 155

150

150

1090

1090

TeChniCal

materialfurnitubes cast iron, bronze and steel railings are 100% recyclable.





Post caps & collars are in cast iron and supplied in a primed finish.Junction brackets are cast in bronze and are supplied unpainted.We recommend that top coats are applied on site after installation.




linx 300 series


123

Linx

™ R

ailin

g




linx 300 post & rail range

euston post

lep 300 r3intermediate/corner Post for 3-Rail

lep 300 r2intermediate/corner Post for 2-Rail

options:end Post

knightsbridge post

lkp 300 r3intermediate/corner Post for 3-Rail

lkp 300 r2intermediate/corner Post for 2-Rail

options:end Post

ashton post

lap 300 r3intermediate/corner Post for 3-Rail

lap 300 r2intermediate/corner Post for 2-Rail

options:end Post

hale post

lHp 300 r3intermediate/corner Post for 3-Rail

lHp 300 r2intermediate/corner Post for 2-Rail

options:end Post

trafford post

ltp 300 r3intermediate/corner Post for 3-Rail

ltp 300 r2intermediate/corner Post for 2-Rail

options:end Post

linx 300 post & rail range

euston base collar

eB 100

3-rail

l3r 300 Ø48 rails for 2m post pitch


tB 100

2-rail

l2r 300 Ø48 rails for 2m post pitch


lBr 300 cast bronze bracket complete with fixings

TeChniCal


Suitabilitybefore making your final guardrail or post & rail selection please refer to ‘selecting an Appropriate Rail system’ notes on pages 112 - 113.



materials & finishPosts and rails are manufactured in steel and supplied in a galvanised finish as standard.

Post caps & collars are in cast iron and supplied in a primed finish.Junction brackets are cast in bronze and are supplied unpainted.We recommend that top coats are applied on site after installation.


to convert an intermediate post to a 3-way post, the following number of additional joint assemblies are required:2 rail - 2 joints 3 rail - 3 joints.

to convert an intermediate post to a 4-way post, the following number of additional joint assemblies are required:2 rail - 4 joints 3 rail - 6 joints.

Ø 115

Ø 115

Ø 115

Ø 115

Ø 115

Ø 200Ø 15

5

150

595

375

1200

375

1275

375

1180

375

1200

375

1270

1090

1090

linx 300 series



124R

AIL

ING

S



linx 400 3-rail lnp 400 poststainless steel

l3r 415 panelto suit 1.5m Post Pitch

l3r 420 panelto suit 2m Post Pitch

TeChniCal

materialfurnitubes steel and stainless steel railings are 100% recyclable.




materials & finishPosts and panels are manufactured in stainless steel and supplied in a satin finish as standard.

linx 400 series

linx 400 3/4 guardrail range

lnp 400 poststainless steel

lQr 415 panelto suit 1.5m Post Pitch

lQr 420 panelto suit 2m Post Pitch

linx 400 full guardrail

lnp 400 poststainless steel

lFr 415 panelto suit 1.5m Post Pitch

lFr 420 panelto suit 2m Post Pitch

Ø 100

375

1135

Ø 100

375

1135

Ø 100

375

1135

optionsmild steel, GalvanisedPowder coated mild steelsatin Polished stainless steelbright Polished stainless steelGlass bead blast finish




1070

1070

1070

130

130

130


125

Linx

™ R

ailin

g


rail

l1r 200 60 x 40 Knee-Rail for 2m post pitch

options:Radiused Rail

linx 100 knee-rail range

euston post

lek 100 intermediate/corner Post for Knee-Rail

options:end Post

knightsbridge post

lkk 100 intermediate/corner Post for Knee-Rail

options:end Post

ashton post

lak 100 intermediate/corner Post for Knee-Rail

options:end Post

hale post

lHk 100 intermediate/corner Post for Knee-Rail

options:end Post

trafford post

ltk 100intermediate/corner Post for Knee-Rail

options:end Post

rail

l1r 100 60 x 40 Knee-Rail for 2m post pitch

options:Radiused Rail


euston post


options:end Post

knightsbridge post


options:end Post

ashton post


options:end Post

hale post


options:end Post

trafford post


options:end Post


euston post


options:end Post

knightsbridge post


options:end Post

ashton post


options:end Post

hale post


options:end Post

trafford post


options:end Post

rail

l1r 300 Ø48 Knee-Rail for 2m post pitch

250

540

Ø 115

Ø 115

250

560

Ø 115

Ø 115

Ø 115

250

540

250

520

Ø 115

Ø 115

Ø 115

Ø 115

250

630

Ø 115

Ø 75 Ø 75 Ø 75 Ø 75 Ø 7525

058

0

450

250

635

250

560

250

630

450

250

530

250

580

250

530

250

560

250

635

250

560

450

linx 200 series

linx 100 series

linx 300 series


We reserve the right to change the design and specif ication on any item offered and, where possible, notif ication will be made.

TeChniCal


Suitabilitybefore making your f inal guardrail or post & rail selection please refer to ‘selecting an Appropriate Rail system’ notes on pages 112-113.



materials & finishPosts and rails are manufactured in steel and supplied in a galvanised f inish as standard.

Post caps & collars are in cast iron and supplied in a primed finish.Linx 300 junction brackets are cast in bronze and are supplied unpainted.We recommend that top coats are applied on site after installation.

3 & 4 Way postsintermediate & end posts are supplied complete with all necessary joint assemblies & f ixings.

to convert an intermediate post to a 3-way post, 1 additional joint assembly is required.

to convert an intermediate post to a 4-way post, 2 additional joint assemblies are required.



126R

AIL

ING

S

furnitubes’ Romney guardrail system, as pictured here, is a simple modern design.

the product has a post which has been especially designed to accommodate corporate logos into the top cast junction boss.

furnitubes’ composite barriers are manufactured from steel and cast iron, offering a combination of strength, reliable protection and durability to help ensure pedestrian safety wherever they are specified. composite bollards have also been created to support rail applications. further details appear in the bollards section.

the Stretford guardrail is a popular choice among specifiers due to its flexibility. the panels are able to follow the line of a gentle curve in a segmented arrangement, as can be seen in the picture on this page. this could preclude the need for a costly site survey and the production of specially radiused panels. the stretford is available with a wide range of top and base castings and in two different post diameters.

STRETFORD & ROMNEYcomposite rail systems

▲ STRETFORD FULL GUARDRAILAshton post

◄ ROMNEY FULL GUARDRAIL

▼ ROMNEY FULL GUARDRAILwith corporate logo (special commission) supplied to st Georges Wharf, Vauxhall

Durability and reliability combined with functional good looks are essential qualities for all guardrail systems.


127

Com

posi

te R

ail S

yste

ms



stretford 115 guardrail range

ashton post

sap 115 Fintermediate Post for full Guardrail Panel

sap 115 Qintermediate Post for 3/4 Guardrail Panel

optionsend Postcorner Post

hale post

sHp 115 Fintermediate Post for full Guardrail Panel

sHp 115 Qintermediate Post for 3/4 Guardrail Panel

options:end Postcorner Post

trafford post

stp 115 Fintermediate Post for full Guardrail Panel

stp 115 Qintermediate Post for 3/4 Guardrail Panel



sFr 115Panel for 2m post pitch70 x 8 horizontal rails16 sq vertical infill bars

options:High Visibility PanelRadiused Panel

3/4 guardrail panel

sQr 115Panel & Rail for 2m post pitch60 x 40 top rail70 x 8 horizontal panel rails16 sq vertical infill bars


trafford collar

tB 100

stretford 75 guardrail range

ashton post

sap 75 Fintermediate Post for full Guardrail Panel

sap 75 Qintermediate Post for 3/4 Guardrail Panel


hale post

sHp 75 Fintermediate Post for full Guardrail Panel

sHp 75 Qintermediate Post for 3/4 Guardrail Panel


trafford post

stp 75 Fintermediate Post for full Guardrail Panel

stp 75 Qintermediate Post for 3/4 Guardrail Panel



sFr 75Panel for 2m post pitch70 x 8 horizontal rails16 sq vertical infill bars


3/4 guardrail panel

sQr 75Panel & Rail for 2m post pitch60 x 40 top rail70 x 8 horizontal panel rails16 sq vertical infill bars


trafford collar

tB 200

TeChniCal



materials & finishPosts and panels are manufactured in steel and supplied in a galvanised finish as standard.Post caps & collars are in cast iron and supplied in a primed finish.We recommend that top coats are applied on site after installation.

350

1125

Ø 115

Ø 115

Ø 115

Ø 200

120

120

Ø 145

Ø 75 Ø 75 Ø 75

350

1100

1020

1020

350

1200

350

1125

350

1100

350

1150

1020

120

120

1020

stRetfoRD GuARDRAiL RAnGe




128R

AIL

ING

S

90

romney guardrail and post & rail range

full guardrail post

rmd 2rintermediate Post for full Guardrail Panel

options:end Post


rmdr FPanel for 2m post pitchØ48 horizontal railsØ16 vertical infill bars

options:Raked PanelRadiused Panel

3/4 guardrail post

rmd 3rintermediate Post for 3/4 Guardrail Panel

options:end Post

3/4 guardrail panel

rmdr s1QPanel & Rail for 2m post pitchØ48 horizontal railsØ16 vertical infill bars

options:Raked Panel & RailRadiused Panel & Rail

3-rail post

rmd 4rintermediate Post for 3-Rail

options:end Post

3-rail

rmdr s3Ø48 rails for 2m post pitch

options:Raked RailsRadiused Rails

romney post & rail range

2-rail high post

rmd 5rintermediate Post for 2-Rail High

options:end Post

2-rail



2-rail low post

rmd 6rintermediate Post for 2-Rail Low

options:end Post

2-rail



knee-rail post

rmd 7rintermediate Post for trip-rail

options:end Post

1-rail

rmdr s1Ø48 rail for 2m post pitch

options:Raked RailRadiused Rail

Ø 7535

011

35

Ø 75 Ø 75

Ø 75 Ø 75

Ø 75

350

690

595

250

495

1090

645

450

1090

1090

350

1135

350

1135

150

150

150

350

1135

1090

150



TeChniCal



materials & finishPost stems and panels are manufactured in steel and supplied in a galvanised finish as standard.Post junctions are in s.G iron and supplied in a primed finish.We recommend that top coats are applied on site after installation.

logo Bossesthe Ø70 circular bosses are on only one side of the rail junctions and are left plain as standard. Alternatively, they may be utilised for raised relief logos or completely removed upon special request.

RomneY GuARDRAiL RAnGeRomneY Post & RAiL RAnGe



129

Ste

el R

ailin

gs

the beauty of steel is its consistent tensile strength. economy and material sizes can be balanced to ensure that a particular barrier provides a specific level of protection.

HARRINGTON & HACKNEYsteel railings

▲ HARRINGTON 3/4 GUARDRAIL installed in Greenwich, London

▲ HARRINGTON 3/4 GUARDRAILwith gold highlightingas supplied to bulverhythe Road, st Leonards on sea

furnitubes steel barriers, manufactured to the highest standards can be fabricated to meet the needs of any individual site. steel is also fully recyclable.

▲ HARRINGTON 3/4 GUARDRAIL as supplied to college Approach, Greenwich, London

the Hackney post and rail system is based on the design of the Harrington. it utilises the use of a bracket, allowing rails to be fixed to the post using just one bolt, thus making installation easier and provides more freedom on complex sites.

▲ HACKNEY 3/4 GUARDRAIL bracket detailsupplied to Lb Hackney

the Harrington post and rail system not only offers the protective advantages of steel but has the elegance and traditional appearance of cast iron.



130R

AIL

ING

S



harrington post & rail range

2-rail high post

Har 5rintermediate Post for 2-Rail High

options:end Postcorner Postbase Plated

2-rail

Harr s2Ø48 rails for 2m post pitch


2-rail low post

Har 6rintermediate Post for 2-Rail High


2-rail



knee-rail post

Har 7rintermediate Post for Knee-Rail


rail

Harr s1Ø48 rail for 2m post pitch


harrington guardrail and post & rail range

full guardrail post

Har 2rintermediate Post for full Guardrail Panel



Harr FPanel for 2m post pitchØ48 horizontal railsØ16 vertical infill bars


3/4 guardrail post

Har 3rintermediate Post for 3/4 Guardrail Panel

options:end Postcorner Post base Plated

3/4 guardrail panel

Harr s1QPanel & Rail for 2m post pitchØ48 horizontal railsØ16 vertical infill bars


3-rail post

Har 4rintermediate Post for 3-Rail


3-rail



see note 1 see note 1

TeChniCal

materialfurnitubes steel railings are 100% recyclable.


materials & finishPost and panels are manufactured in steel and supplied in a galvanised finish as standard.We recommend that top coats are applied on site after installation.

high visibility panelsmaterials sections for high visibility panels are as follows:Horizontal panel rails - 50 sqVertical infill bars - Ø16 top rail (3/4 only) - 50 sq or Ø48

note 1

Ø 7535

011

60

Ø 7535

011

60

Ø 7535

011

60

90 90 90

Ø 7535

011

60

Ø 75

Ø 75

350

705

550

90

250

585

1050

1050

1050

590

475

1050


HARRinGton GuARDRAiL RAnGeHARRinGton Post & RAiL RAnGe


131

Ste

el R

ailin

gs



hackney post & rail range

2-rail high post

Hac 5rintermediate Post for 2-Rail High


2-rail

Hacr s2Ø48 rails for 2m post pitch


2-rail low post

Hac 6rintermediate Post for 2-Rail High


2-rail



knee-rail post

Hac 7rintermediate Post for Knee-Rail


rail

Hacr s1Ø48 rail for 2m post pitch


hackney guardrail and post & rail range

full guardrail post

Hac 2rintermediate Post for full Guardrail Panel



Hacr FPanel for 2m post pitchØ48 horizontal railsØ16 vertical infill bars


3/4 guardrail post

Hac 3rintermediate Post for 3/4 Guardrail Panel


3/4 guardrail panel

Hacr s1QPanel & Rail for 2m post pitchØ48 horizontal railsØ16 vertical infill bars


3-rail post

Hac 4rintermediate Post for 3-Rail


3-rail



see note 1 see note 1

TeChniCal




high visibility panelsmaterials sections for high visibility panels are as follows:Horizontal panel rails - 50 sqVertical infill bars - Ø16 top rail (3/4 only) - 50 sq or Ø48

note 1

Ø 7535

011

60

Ø 7535

011

60

Ø 7535

011

60

90 90 90

Ø 7535

011

60

Ø 75

Ø 75

350

705

550

90

250

585

1050

1050

1050

590

475

1050


HAcKneY GuARDRAiL RAnGeHAcKneY Post & RAiL RAnGe



132R

AIL

ING

S

in addition to preventing pedestrians from crossing or walking into high traffic areas, they can also be used to designate safe crossing places at dangerous crossing points such as junctions and bends. PGRm Pedestrian Guardrails are manufactured in standard two metre panels and are available as full Pedestrian Guardrail, 3/4 Pedestrian Guardrail and 2-bar Handrail.


TeChniCal





325

1050

2000

2000

2000

325

1050

325

1050



PGRMsteel barriersPedestrian Guardrails ‘PGRm’ are an inexpensive and effective solution in improving traffic safety.

full pedestrian guardrail

pgrm 100Galvanised steel50 x 30 frameØ12 vertical infill bars

options:Polyester Powder coatedstainless steelHigh Visibility Panel

3/4 pedestrian guardrail

pgrm 200Galvanised steel 50 x 30 frameØ12 vertical infill bars

options:Polyester Powder coatedstainless steelHigh Visibility Panel

2-bar pedestrian handrail

pgrm 2rGalvanised steel 50 x 30 frame

options:Polyester Powder coatedstainless steel

▲ P

GR

M 2

00in

stal

led

at W

estfi

eld

Shop

ping

Cen

tre,

She

pher

d’s

Bush

, Lon

don


133

Ped

estr

ian

Gua

rdra

il

the oKR is produced using high visibility panels which maximise the motorist’s vision from any angle. the staggered vertical bars of the high visibility panels have the visual effect of creating space when viewed at an angle allowing motorists to see pedestrians approaching a crossing point. this is the ideal solution at high risk areas such as outside schools.




okr post & rail range

end post

okr 301 end Post

TeChniCal



finishPosts and rails are manufactured in steel and supplied in a galvanised finish as standard. We recommend that top coats are applied on site after installation.

oKR railings can be supplied black Powder coated. However, furnitubes cannot be held responsible for any damage during transit.

removable Socketsfurnitubes offer the fi socket to suit the 50 x 50 oKR railing posts - see page 135.

guardrail panel with balls

okr 306Panel for 2m post pitch70 x 8 horizontal rails with balls on top12 square vertical infill bars

options:High Visibility Panel

intermediate post

okr 302intermediate Post

1000

50 sq

guardrail panel without balls

okr 305Panel for 2m post pitch70 x 8 horizontal rails12 square vertical infill bars


100

OKRsteel railings

300

1070

▲ OKR GUARDRAIL V2 - high visibilitygalvanised steel version with balls on top of panel

the oKR steel railings utilise hooped rings and forged balls in an extremely popular and decorative design.

▲▼ OKR V4 GUARDRAIL - high visibilitywith balls on top of panelinstalled on Kennington Lane, London

2000



134R

AIL

ING

S




TeChniCal



finishPosts and rails are manufactured in steel and supplied in a galvanised finish as standard. We recommend that top coats are applied on site after installation.

HKR railings can be supplied Powder coated. However, furnitubes cannot be held responsible for any damage during transit.

removable Socketsfurnitubes offer the fi socket to suit the 50 x 50 HKR railing posts - see page 135.

50 sq

100

HKRsteel railings

300

1000

▲ HKR GUARDRAILwith V4 high visibility panelused in sites in Hammersmith & fulham

the HKR railings utilise high visibility panels which maximise the motorist’s line of sight.

the staggered vertical bars of the high visibility panels have the visual effect of creating space when viewed at an angle allowing motorists to see pedestrians approaching a crossing point. this is the ideal solution at high risk areas such as outside schools.

hkr post & rail range

end post

Hkr 301 end Post

guardrail panel

Hkr 308Panel for 2m post pitch70 x 8 horizontal rails12 square vertical infill bars


intermediate post

Hkr 302intermediate Post

900

PANELTYPE PANEL LAYOUT

OPTIMUMSIGHT ANGLE WHERE USED

V2 2.5° TO 5° STRAIGHT ROADSMODERATE SPEEDS

V4 5° TO 14° BENDS.SLOW SPEEDS

V8 MORE THAN 14° BELLMOUTHS. SITE WHEREVISIBILITYIS NOT THE MAIN REQUIREMENT

▲ HIGH VISIBILITY CHART

2000


135

Ped

estr

ian

Gua

rdra

il




F1 75composite Removable socketwith cast iron Lid and Key.

to accept Ø75mm diameterLinx 200, stretford 75, Romney or Harrington posts

options:shallow mount

175

8533

5

sometimes it is necessary for railings to be removable to allow them to be taken away during special occasions or for access to manhole services below. furnitubes f1 socket is suitable for this task.

set socket in concrete. Align along the direction of the railings.

foundation notePrepare hole at least 75mm deeper than overall height of the socket and fill below with hard-core or gravel to allow for drainage.

Place the socket in the centre of the hole, ensuring that there is good clearance on all sides, and hold in vertical position.

Pour concrete and compact well and check that socket is vertical until it has set.

note: if existing ground is loose or uncompacted, a wider/deeper base of concrete should be used.

160

345

300

F1 115composite Removable socket with cast iron Lid and Key. to accept Ø115mm diameterLinx 100, Linx 300 or stretford 115 posts

options:shallow mount

21.5 kg

F1 50composite Removable socketwith steel Lid.

to accept 50mm squareoKR & HKR railing post

130

270

300

11.5 kg

the FI 50 socket is designed to accept a 50mm square post profile, which makes it ideal for use with the oKR and HKR railing systems, while the FI 75 and FI 115 are suited for our larger railing systems.

they are of robust composite steel construction, with one hole to accept the railing post and another to access the internal retention bolts. these bolts enable the socket to firmly grip the post.

two lids are also supplied per socket, one to hide these bolts and the other to cover the main hole when not in use. further details are provided on pages 60 and 61 of the bollards section.

■ aesthetically pleasing solution

■ neat retention bolts hidden from view

■ strong composite construction

■ removal of posts within a few minutes

■ can be blanked off when a post is not used

5.5 kg

F1 SOCKETSfor steel posts

reTaininG BolT

(stainless steel)

main Body(coated cast iron)

lidS

(coated stainless steel)

all fixinGS

(stainless steel)

▲ F1 50 SOCKET

TeChniCal

F1 50 x 60composite Removable socketwith steel Lid

to accept two PGRm posts

F150 F148 F150 x 60

175

8533

5

fi socket range

F1 48composite Removable socketwith steel Lid

130

185

7 kg5.5 kg

fix pressure plate loosely in place. Withdraw bolt to allow the post to enter.

slide post into socket. tighten bolt fully to secure post.

Replace lid and bolt securely.

F150 F148 F150 x 60

335



136R

AIL

ING

S

furnitubes manufacture one of the widest and most comprehensive range of cast iron post & rail systems on the market today. often selected for its aesthetic qualities, cast iron gives a timeless elegance to towns and heritage areas.

CAST IRONrail barriers

▲ REIGATE 3-RAILas supplied to Park Royal, London

▲ REIGATE FULL GUARDRAIL

▲ REIGATE 3-RAILrails bend at corners to reduce damage on impact

cast iron is corrosion resistant and therefore ideal for seafronts, piers, marinas and canals where a low maintenance system is required. Public safety is paramount and careful positioning of post & rail directs pedestrians away from danger especially at roadside, waterside or other high-risk areas.

the Reigate post has been designed specifically to accommodate a variety of rail systems. full, 3/4 or 1/2 guardrail, 3-rail, 2-rail and trip-rail. this diversity allows a variety of options for multiple applications within the same general area.

furnitubes cast iron railings are recommended with bent corners. this allows any angle to be achieved instead of the standard 90 degrees. this arrangement also allows for easy replacement if damaged as the post is more likely to remain intact.


137

Cas

t Iro

n R

ail B

arrie

rs


We reserve the right to change the design and specif ication on any item offered and, where possible, notif ication will be made.

TeChniCal


Suitabilitybefore making your final guardrail or post & rail selection please refer to ‘selecting an Appropriate Rail system’ notes on pages 112-113


materials & finishPost are manufactured in cast iron and supplied in a primed finish as standard.Panels are in steel and supplied in a galvanised finish.

We recommend that top coats are applied on site after installation.


reigate guardrail range

full guardrail post

rei 351intermediate Post for full Guardrail Panel

options:end Postcorner Postbaseplate

full guardrail panel reir F Panel for 2m post pitchØ42 horizontal railsØ16 vertical infill bars


3/4 guardrail post

rei 352intermediate Post for 3/4 Guardrail Panel


3/4 guardrail panel

reir s1Q Panel & Rail for 2m post pitchØ42 horizontal railsØ16 vertical infill bars


1/2 guardrail post

rei 353intermediate Post for 1/2 Guardrail Panel


1/2 guardrail panel

reir s1H Panel & Rail for 2m post pitchØ42 horizontal railsØ16 vertical infill bars


reigate post & rail range

3-rail post

rei 353intermediate Post for 3-Rail


rail mst 42 Ø42 rail supplied in 6.4-6.5m random length

trip-rail post

rei 356intermediate Post for trip-Rail

options:end Postcorner Postbase PlatedKnee Rail

rail

mst 42 Ø42 rail supplied in 6.4-6.5m random length

100

sq30

012

25

200

100

sq30

012

25

100

sq20

034

5

100

sq30

012

25

630

100

sq30

012

25

200

100

sq

200

1120

1120

300

1225

1120

1120

200

2-rail post

rei 354intermediate Post for 2-Rail


rail

mst 42 Ø42 rail supplied in 6.4-6.5m random length

ReiGAte GuARDRAiL RAnGeReiGAte Post & RAiL RAnGe

1120

240



138R

AIL

ING

S

marine post & rail

2-rail post

mar 751intermediate Post for 2-Rail


rail mst 42Ø42 rail supplied in 6.4-6.5m random length

270

1050

445

Ø 150

880

▲ ROCHESTER 3/4 GUARDRAILwith high visibility panelas supplied to Rochester, Kent

rochester guardrail

3/4 guardrail post

rcH 426intermediate Post for 3/4 Guardrail Panel

options:end Post

3/4 guardrail panel rcHr s1Q Panel & Rail for 2m post pitchØ60 top rail50 sq horizontal panel railsØ16 vertical infill bars

options:High Visibility PanelRaked Panel & Rail

100

sq30

012

10

100

1060



TeChniCal




materials & finishPosts are manufactured in cast iron and supplied in a primed finish as standard.Panels and/or rails are in steel and supplied in a galvanised finish.



▲ MARINE 2-RAIL

ROCHESTER & MARINE POST & RAILthe decorative Rochester post and rail system was named after the city of Rochester where it was first installed. the Rochester, as with most of our railing systems, is available with high visibility panels, and has been supplied in sG iron for roadside use.

the Marine 2-Rail is ideal for seafront areas.

CAST IRONrail barriers


139

Cas

t Iro

n R

ail B

arrie

rs




windsor post & rail

2-rail post

win 536intermediate Post for 2-RailRoot fixed



hove post & rail

knee-rail post

Hov 450intermediate Post for Knee-Rail


rail

mst 33Ø33 rail supplied in 6.4-6.5m random length

TeChniCal




materials & finishPosts are manufactured in cast iron and supplied in a primed finish as standard.Panels and/or rails are in steel and supplied in a galvanised finish.


100

sq30

010

80

450

320

200

440

75 sq

930

350

hammersmith riverside post & rail

2-rail post

Ham 532intermediate Post for 2-Railbolt Down



1125

940

460

165

sq

HAMMERSMITH & WINDSOR POST & RAILthe Hammersmith Riverside and Windsor designs have become increasingly popular throughout the country and are a standard specification with many local authorities. fully painted and highlighted railings are available giving identity to an area, however for the best results furnitubes recommend that railings are painted on site after installation.

▲ WINDSOR 2-RAILas installed in to beckenham, bromley

▲ HOVE KNEE-RAIL

rail barriersCAST IRON

▲ HAMMERSMITH RIVERSIDE 2-RAIL

HOVE KNEE RAILthe Hove knee-rail is one of the most popular cast iron knee-rails in the uK. used primarily as an attractive edging for lawns and landscaped areas it restricts access without intruding upon the general streetscape.

130

Ø12 holes



140R

AIL

ING

S

furnitubes’ design team were sensitive to conservation when asked to extend the existing railings along eastbourne seafront. the post & rail pictured here is an exact replica of the unusual cast aluminium original.

While the main function of guardrail is to protect the public from the highway, many systems can be adapted to either incorporate access gates (see page 142) or tailored for wall-top installation, as shown here.

COMMISSIONSspecial

▲ R

eplic

a C

ast A

lum

iniu

m R

ailin

gs

▲ D

ecor

ativ

e St

eel R

ailin

gs

current trends are placing more demands on suppliers of street furniture to develop new and distinctive products, enhancing the appearance of the built environment and providing a real sense of location.

▲ ROMNEY FULL GUARDRAILwith corporate logo (special commission) supplied to st George’s Wharf, Vauxhall

SPECIAL SITESthe Linx Railing was adapted to replace the existing railings at brighton marina. trafford capped posts were supplied with a bolt-down plate to fix to the existing foundations.

the Romney Guardrail installed at st Georges Wharf, Vauxhall, has been adapted to incorporate timber handrails to create an attractive contrast between natural timber and painted steel.

▲ LINX RAILINGStrafford cap (special commission)supplied to brighton marina


141

Spe

cial

Com

mis

sion

s

CaST iron BollardS aS railinG poSTSfurnitubes’ design team have researched new uses for traditional cast iron bollards, and the flexibility of our standard products means that it is possible to adapt items in a way which most readily suits the requirements of our clients.

Right, a standard Holborn bollard has been adapted to accept two rail posts. this versatility permits a uniform appearance with other items of street furniture and with existing bollards. standard cast iron bollards can be adapted to act as barriers, railings, fencing and gate posts.

many of these items are exclusive to furnitubes international, such as the belsize whose design was taken from an original Victorian bollard at belsize Park in Hampstead. furnitubes’ pattern makers skillfully produced a faithful copy which was then cast and adapted to take a circular section rail.

for the complete range of bollards that complement or can be adapted for post & rail applications please refer to the bollards section.

◄▼ EDINBURGH Bollardas railing post (special commission)

▲ BELSIZE Bollardas railing post

▲ CANNON Bollardas railing post

Railings can also be designed to work in conjunction with many of furnitubes’ products. Here a Linx 100 panel fits seamlessly into a bell traffic bollard. the bell protects the post from damage and the post provides increased visibility and safety.

▲ LINX with BELL BOLLARD(see bollards section)

▲ HOLBORN 2-RAILinstalled at bessborough Gardens, Vauxhall, London



142R

AIL

ING

S

While the main function of guardrail is to protect the public from the highway, many systems can be adapted to either incorporate access gates as shown here with the PGRM and Reigate 1/2-rail. the frame, hinge and hasps are manufactured from structural steel and fully galvanised to optimise endurance and strength. fixings are generally supplied in stainless steel.

furnitubes design team are always on hand to discuss bespoke gate requirements. they are able to advise on the most suitable types of post to suit a particular application and to propose feasible designs for the gate framework.

GATES

PGRM Double Leaf Gate ▲

CAST IRON REIGATE ▲½ rail with gate

iLLustRAtions not to scALe

pgrm gate

single leaf

pgsl 100 - PGRm 1 metre gate pgsl 200 - PGRm 2 metre gate

pgsl 300 - PGRm 3 metre gate

pgsl 400 - PGRm 4 metre gate

double leaf

pgdl 100 - PGRm 1 metre gate pgdl 200 - PGRm 2 metre gate

pgdl 300 - PGRm 3 metre gate

pgdl 400 - PGRm 4 metre gate

cLeARAnce

450

1050



TeChniCal

materialfurnitubes steel gates are 100% recyclable.

finishGates are supplied in a galvanised finish.

padlockfor use with an fb padlock - not supplied - available upon request.

ClearanceGates can be designed to suit any specification, please contact sales to discuss your site requirements.

cLeARAnce

390

1050

Galvanised steel Gate

options:3/4 Panel2-Rail PanelHi Visibility Panelstainless steel


options:3/4 Panel2-Rail PanelHi Visibility Panelstainless steel


143

Gat

es

3770

USE THIS ONE!! IT IS SCALED CORRECTLY @ 1:25

furnitubes patented Linx™ railing system can also incorporate gates, providing access for areas whilst keeping consistency within a scheme.



TeChniCal

materialfurnitubes Linx gates are 100% recyclable.

finishcast iron posts caps are supplied in a primed finish and steel posts and gate fabrication is supplied in a galvanised finish.


the Linx gate is available in steel or stainless steel can be single or double leaf. the gate can have a clearance of up to 4 metres, and is compatible with all four Linx series. see page 115 for the range of caps available.

gate

cLeARAnce

▲ LINX 100 Gatedouble leaf with euston cap

linxTm

bollards pg 46 railings pg 114parking pg 98

RAnGe

litter pg 253

▲ LINX 300 GATE¾ rail double leaf gate with stainless steel Ashton caps

installed in Leytonstone, essex (special commission)

375

1180

1090

iLLustRAtions not to scALe

linx gate

single leaf

lgsl 001 - Linx 1 metre gate lgsl 002 - Linx 2 metre gate

lgsl 003 - Linx 3 metre gate

lgsl 004 - Linx 4 metre gate

double leaf

lgdl 001 - Linx 1 metre gate lgdl 002 - Linx 2 metre gate

lgdl 003 - Linx 3 metre gate

lgdl 004 - Linx 4 metre gate


options:Linx 100 GateLinx 200 GateLinx 300 GateLinx 400 Gate3/4 PanelHi Visibility panelstainless steel


options:Linx 100 GateLinx 200 GateLinx 300 GateLinx 400 Gate3/4 PanelHi Visibility panelstainless steel



144R

AIL

ING

S

for secured access, furnitubes also offer a heavy duty gate, utilising reinforced telford bollards in s.G iron for excellent strength characteristics.

1:25 fRont eLeVAtion

telford gate range

2900 clearance

tgt 290 telford sG cast iron bollardssteel Galvanised Gate fabrication

options:Locking PostReflective sign

3420 clearance

tgt 340telford sG cast iron bollardssteel Galvanised Gate fabrication


4500 clearance

tgt 450telford sG cast iron bollardssteel Galvanised Gate fabrication


both the Holborn and telford gates comprise of a hinge bollard, a locking bollard, plus an optional additional bollard to secure the gate when in the open position. bollards require a foundation depth of 800mm.

the gate is available with a clearance width of either 2900mm, 3420mm or 4500mm. ‘Emergency Access - Keep Clear’ reflective sign plates are also available.

TELFORD & HOLBORNgates

cLeARAnce

800

1015

870

▲ TELFORD Gatewith sign platesupplied to Lb Lewisham

Hinge Detail ▲

▲ TELFORD Gatewith sign plate & optional locking bollard



TeChniCal

materialfurnitubes cast ironand steel gates are 100% recyclable.

finishPosts are supplied in a primed finish and steelgate fabrication is supplied in a galvanised finish. We recommend that top coats are applied on site after installation.


Signoptional “emeRGencY Access - KeeP cLeAR” white on red reflective sign can be fitted both sides.


145

Gat

es

1:25 fRont eLeVAtion

holborn gate range

2900 clearance

Hol 290 Holborn composite bollardssteel Galvanised Gate fabrication


3420 clearance

Hol 340Holborn composite bollardssteel Galvanised Gate fabrication


4500 clearance

Hol 450Holborn composite bollardssteel Galvanised Gate fabrication


cLeARAnce

800

1170

900

▲ HOLBORN Gate



TeChniCal

materialfurnitubes cast ironand steel gates are 100% recyclable.

finishGate and posts are supplied in a galvanised finish. Decorative castings are supplied primed. We recommend that top coats are applied on site after installation.


Signoptional “emeRGencY Access - KeeP cLeAR” white on red reflective sign can be fitted both sides.

gatesTELFORD & HOLBORN

the Salisbury composite bollard (see page 45) can also be adapted as gate posts. Please call our technical sales department for further details.

▲ HOLBORN Gatepainted steel bollard with galvanised steel gate with sign plate (special commission)supplied to Lb Hammersmith & fulham

Furnitubes International LimitedMeridian House, Royal Hill

Greenwich, LondonSE10 8RD

tel +44 (0)20 8378 3200fax +44 (0)20 8378 3250www.furnitubes .com

For possible modifications or updates, please refer to www.furnitubes.com

© Furnitubes 2012

furnitubes - litters and waste brochure

Documents