fujikura fsm 60 r12 fusion splicer
TRANSCRIPT
Fujikura FSM-60R12 Fusion Splicer
A brief description of FUjikura FSM-60R
The new FSM-60R12 Fusion Splicer is Mass Ribbon Fusion Splicer’sleading-edge features, including unprecedented size, weight, and ruggedness,make it the first core-alignment splicer truly optimized for field use, includingFTTH applications. Automation such as calibration-free arc (with AUTO splicemode), automatic fiber identification and reduced operational steps, providesease of use. In addition, the Fujikura FSM-60R12 Fusion Splicer Mass offersincreased flexibility with user selectable front or top monitor positioning. TheFujikura FSM-60R12 Mass splicer has been designed for use in harsh, outdoorconditions and features an innovative wind protector, which allows splicing in30 mph cross winds.
The FSM-60R12 Splicer offers unmatched versatility and reliability. The newribbon splicer withstands a drop test of up to 30” and continues to splice. Andenhanced, robust features enable the FSM-60R12 to resist shock, dust, andrain so that unfortunate environmental conditions do not negatively impactproductivity.
Equipped with a user-friendly interface and precision fixed V-groove, theFSM-60R12 offers 2 to 12 fiber ribbon splicing, as well as, single fiber splicingcapability. Automated features such as auto-start splicing, auto-start tubeheater operation, automatic ribbon fiber identification, and auto-arc calibrationreduce operational steps and improve splicing performance. Additional
improvements include automatic image orientation when switching the dualposition monitor, a large capacity battery option and the ability to charge thebattery during splicer operation.
New software included provides the ability to download splice data to a PC forsplice data reporting, download splicer operating software via the internet tomaintain peak performance, and download video images from the splicer toenhance technical support.
Features: Automatic core to core, low-loss splicing regardless of fiber quality or age 9 second splicing time 35 second heat time User selectable monitor position Excellent visibility in bright sunlight with 5.6" TFT Color LCD display Multiple pre-programmed modes for specialized splicing Optional data download ki to connect splicer to PC Wind protector design withstands 30 mph cross wind
SpecificationPARAMETER VALUEModel FSM-60R Fusion SplicerF FSM-70R Fusion Splicer
Applicable FibersSMF(ITU-TG.652),MMF(ITU-TG.651).DSF(ITU-TG.653),NZDSF(ITU-TG.655),BIF(ITU-T657)
Fiber Count Single, 2, 4, 5, 6, 8, 10, 12Cladding Diameter 125 μmCoating Diameter Ribbon: 0.25 mm to 0.4 mm, Single: 250 μm and 900 μmFiber Cleave Length 10mm 10 mm ~13mmTypical Average SpliceLoss
0.05 dB with SM, 0.02 dB with MM, 0.08 dB with DS, 0.08 dB with NZDS; measured bycut-back method relevant to ITU-T standards
Splicing TimeTypical 20 seconds with standardsingle-mode fiber
Typical 11 seconds with standardsingle-mode fiber
Arc CalibrationMethod
Automatic, real-time by using results of previous splice when in AUTO mode; manual arccalibration function available
Splicing Modes 100 preset and user programmable modesSplice Loss Estimate Based upon dual camera cladding alignment dataStorage of SpliceResult
Last 2000 splice results stored in the internal memory
Fiber DisplayX or Y, or both X and Y simultaneously; front or rear monitor display options with automaticimage orientation
Magnification 35X to 90XViewing Method Dual cameras with 4.7 inch TFT color LCD monitor with anti-reflective coatingOperating Condition 0 to 3,660 m above sea level, 0 to 95% RH, and -10 to 50℃ respectivelyMechanical Proof Test 1.96 to 2.25 NTube Heater Built-in tube heater with 30 heating modes; auto-start function
Tube Heating TimeTypical 40 seconds with FP-5 sleeve, 17 seconds with FP3 (40), 5-15 seconds with Fujikuramicro sleeves
Protection SleeveLength 60 mm, 40 mm, Micro
Splice/Heat Cycleswith Battery
Typical 90 cycles with power save functionsactivated
Typical 110 cycles with power savefunctions activated
Electrode Life 1,500 Arc Discharges
Power SupplyAuto voltage selection from 100 to 240V AC or 10to 15V DC with ADC-13, 13.2V DC with BTR-08battery
Auto voltage selection from 100 to 240VAC or 10 to 15V DC with ADC-18, 14.8VDC with BTR-09 battery
TerminalsUSB 1.1(USB-B type) for PC communication andMini-DIN (6-pin) for HJS-02/03 and SH-8 tuberheater
USB 2.0 (USB-B type) for PCcommunication and Mini-DIN (6-pin) forHJS-02/03
Wind Protection Maximum wind velocity of 15m/s (34 mph)
Dimensions136 W x 161 D x 143 H (mm) / 5.3 W x 6.3 D x5.6 H (inches)
146 W x 159 D x 150 H (mm) / 5.7 W x6.3 D x 5.9 H (inches)
Weight2.1 kg (4.6 lbs) with AC adapter-13; 2.5 kg (5.5lbs) with battery
2.3 kg (5.1 lbs) with AC adapter; 2.5 kg(5.5 lbs) with battery
View: www.fibercasa.com or cs04fibercasa.blogspot.com
for more information
Or you can buy it now.