fuel injection pump #70645322
TRANSCRIPT
-
8/22/2019 Fuel Injection Pump #70645322
1/85
PartsCatalog
FUELINJECTIONPUMP
AMERICAN BOSCHC A P E Series)
ALLIS-CHALMERS
CONST RUCT ION M ACH INERY D IV IS IONSPR ING FIELD, ILLINO IS 62708 U. S . A.
FORM 0645322-9
-
8/22/2019 Fuel Injection Pump #70645322
2/85
AVOID ACCIDENTSMost accidents, whether they occur in industry, on the farm, at
home or on the highway, are caused by the failure of some individualto follow simple and fundamental safety rules or precautions. For thisreason MOST ACCIDENTS CAN BE PREVENTED by recognizing thereal cause and doing something about it before the accident occurs.
Regardless of the care used in the design and construction of anytype of equipment there are many conditions that cannot be completelysafeguarded against without interfering with reasonable accessibilityand efficient operation.
A careful operator is the best insurance against an accident.The complete observance of one simple rule would preventmany thousand serious injuries each year.That rule is:
N e v e r a t t e m p t t o c l e a n , o i l o r a d j u s t a m a c h i n e w h i l e t s nm o t i o n .
NATIONAL SAFETY COUNCIL
WARNING-On machines having hydraulically, mechanically, and/or cable con-trolled equipment (such as shovels, loaders, dozers, scrapers, etc.)be certain the equipment is lowered to the ground before servicing,adjusting and/or repairing. If it is necessary to have the hydraulically,mechanically, and/or cable controlled equipment partially or fullyraised to gain access to certain items, be sure the equipment is suit-ably supported by means other than the hydraulic lift cylinders, cableand/or mechanical devices used for controlling the equipment.
(9-64)
-
8/22/2019 Fuel Injection Pump #70645322
3/85
SECOND PRINTING (4-73)
Identica to the First Printing (9-64) including al supplementaryinformation as reeased thru Parts Bulletin TPSD 132 (3-6-73)
-
8/22/2019 Fuel Injection Pump #70645322
4/85
-
8/22/2019 Fuel Injection Pump #70645322
5/85
IMPORTANTThis publication covers American Bosch APE series Fuel Injection Pumps used onunits manufactured by the Construction Machinery Division of the Allis-ChalmersMfg. Co. Due to the similarity of the various pumps, and to avoid repetition,"Typical" lists of parts have been established. The "Typical" list is followed by alisting of individual assemblies. The only parts that appear in the assembly listingsare those that are different from the "Typical" list. In most cases, no part numberwill appear in the "Typical" list for those parts that usually vary from pump topump. However, if a number for a particular part appears both in the assemblylist and the "Typical" list, the number in the assembly list takes preference. Thus,to correctly order parts from this publication, find the listing of the assembly forwhich the parts are intended and substitute all parts listed therein for the corre-sponding parts in the "Typical" list.Illustrations preceding the text of each group or section are intentionally drawn torepresent the typical design of the pumps listed. Some details may actually bedifferent in appearance from the particular part being identified.Common hardware such as nuts, bolts, cotter pins, etc., not identified with an itemnumber, is indented immediately following the part it attaches.Common attaching hardware listed under a part is not included with the part unlessspecified.Any changes or corrections to this catalog will appear on the regular supplemenform.
At the time this parts catalog was published the listed part numberswere current. It is our policy to constantly improve our machines andtherefore, part numbers and design may change. When ordering parts,verify part numbers through your dealer's parts catalog which is upto date with all latest part numbers.
-
8/22/2019 Fuel Injection Pump #70645322
6/85
INDEXUNIT PAGE
LoaderTL 40 65ScraperTS 200 27260 28,29, 58, 59, 60, 61A,61B,61C, 61D, 61E260 P 58, 61TS 300 27, 30360 30, 31, 62, 63
460 64,64A, 64B562 62, 63, 64, 65
TractorHD 16 A, D 15,16,17,47,48,51,51AHD 16 AC, DC, FC, GC 18, 19, 20, 49, 50, 52, 53HD 16 DP 52,53AHD 21 A, F, G 21, 22, 23, 24, 25, 26 , 54, 55, 56HD 21 P 57,57ATractor DozerD 40 65555 64,65
Wagon260 58, 60260 P 58, 61
TYPICAL PUMP ASSEMBLY T-70595
-
8/22/2019 Fuel Injection Pump #70645322
7/85
PACKAGENUMBER DESCRIPTION4385491 PUMP KIT
1 40400532 4 0 4 0 1 1 11 2 4 0 4 0 1 1 86 4 0 4 0 2 6 11 4 0 4 0 2 6 34 40402761 40402971 4 0 4 0 4 1 96 4 0 4 1 1 4 86 4 0 4 9 6 7 21 4 0 5 1 9 2 31 40526141 4 3 7 2 0 6 01 4 3 7 2 0 6 21 43720646 43720651 4 3 7 2 0 6 76 43720762 43721141 2 4 3 7 2 1 2 0
PACKAGED PARTS
SEAL, oilGASKET, screwGASKET, screwGASKET, delivery valveGASKET, oil baffleWASHER, end plateGASKET, governor end plateGASKET, front plateCAP, plastic (For shipping only)GASKET, valve bodySEAL, oil, camshaftSEAL, oil, camshaftGASKET, drain plugGASKET, transfer pumpGASKET, inspection coverGASKET, base plugGASKET, breather capWIPER, feltGASKET, adapting plugGASKET, union
4385492 GOVERNOR KIT2 40400531 40400851 40400912 40403911 43720561 43720571 43720591 4 3 7 2 0 6 01 4 3 7 2 0 6 71 4 3 7 2 1 4 9
SEAL, oilLOCKWASHERLOCKWASHERPLUG, expansionGASKET, governor housingGASKET, housing coverGASKET, end capGASKET, drain plugGASKET, breather capLOCKWASHER
-
8/22/2019 Fuel Injection Pump #70645322
8/85
T-70809TYPICAL PUMP FOR 779 AND 844 ENGINES
TRACTORS MOTORSCRAPERS 85 84 83 82 81 80 79 78 77 76 7 4 73D\4 te'66168 645433
22 21 20 19 185 1 .
14 50 521 51 6
T 1 \7 /924 25 26 23 271 29 30 31 3428
?71hrt4737 38 39 141 42 43 45 44 46140
4948
75 73A
-
8/22/2019 Fuel Injection Pump #70645322
9/85
INJECTION PUMP PARTSUSAGE: Typical pump for 779 and 844 engine. See assembly listings on following pages forspecific usage and parts information.ITEM PART NO. QTY. DESCRIPTION
1 1 HOUSING ASSEMBLY, pump2 4 1 0 3 1 5 0 3 STUD, pump housing4043006 3 LOCKWASHER4040271 3 NUT3 4 3 7 2 0 6 2 1 GASKET, transfer pump or cover1 PUMP ASSEMBLY, transfer1 COVER, transfer pump hole
5 4372064 1 OGASKET, inspection cover6 4372048 1 COVER, inspection903772 9 CAPSCREW, 5/ 16"NC x 1"4138538 9 LOCKWASHER
4372046 1 CAP, breather (first type, short)7 4372047 1 CAP, breather (second type, long)8 4 3 7 2 0 6 7 1 0 GASKET, breather cap9 4040239 1 PLATE, bearing retaining, rear4 5 0 7 1 4 6 4 SCREW4040276 4 WASHER
1 0 4040297 1 GASKET, rear plate1 1 4052614 1 SEAL, oil, camshaft, rear1 2 4253870 2 BEARING, ball, camshaft1 3 4040237 1 CAMSHAFT9 0 4 3 6 9 1 LOCKWASHER, 3/4"4372251 1 NUT1 4 4040233 1 BEARING, center, camshaft1 5 4 0 4 0 1 1 1 2 GASKET, bearing retaining screw1 6 4040274 2 SCREW, bearing retaining
4040275 2 WASHER, plain4047773 2 LOCKWASHER1 7 4040269 1 KEY, coupling
4040220 A WASHER, camshaft adjusting (.004" thick)4040221 A WASHER, camshaft adjusting (.006" thick)
1 8 4040289 A WASHER, camshaft adjusting (.008" thick)4040290 A WASHER, camshaft adjusting (.012" thick)4040119 A WASHER, camshaft adjusting (.016" thick)
Also see PACKAGED PARTSAUse as required
-
8/22/2019 Fuel Injection Pump #70645322
10/85
ITEM1 92021
222324252627282930
3132333435
36373839404142
43
PART NO, QTY.INJECTION PUMP PARTS (Continued)
DESCRIPTION4 0 5 1 9 2 3 1 SEAL, oil, camshaft, front4 0 4 0 4 1 9 1 GASKET, front plate4040389 1 PLATE, bearing retaining, front4 3 7 2 1 8 5 4 SCREW906958 4 LOCKWASHER, internal teeth, 1/4"4 3 7 1 7 1 2 1 COUPLING4 0 4 3 4 1 8 6 CAP, protecting (plastic)(shipping only)4372121 6 NUT, union retaining4 3 7 2 1 2 0 1 2 GASKET, fuel discharge union43720534040258404025940402414040256
4 0 4 0 2 6 1
66666
6
UNION, fuel dischargeHOLDER, delivery valveHOLDER ASSEMBLY, delivery valve (Consists of items 23 thru 27)SPRING, delivery valveVALVE ASSEMBLY, delivery (Consists of valve and body. Servicedonly as a unit)
GASKET, delivery valve6 PLUNGER ASSEMBLY (Includes barrel)
4040284 6 SCREW, barrel locating4040118 6 GASKET, barrel locating screw4 0 4 0 1 0 3 6 GEAR, segment, control4040280 6 SCREW, clamping4040223 6 SLEEVE, control4040234 6 SEAT, plunger spring, upper4040293 6 SPRING, plunger4040240 6 SEAT, plunger spring, lower4043746 6 TAPPET ASSEMBLY (Consists of items 41 thru 46)4 0 4 0 1 1 2 6 KNOB, tappet4040291 6 RING, snap, knob retaining4040114 A SPACER, tappet (.050" thick)4 0 4 0 1 1 5 A SPACER, tappet (.054" thick)4040116 A SPACER, tappet (.058" thick)4 0 4 0 1 1 3 A SPACER, tappet (.062" thick)4040117 A SPACER, tappet (. 066" thick)
Also see PACKAGED PARTS
-
8/22/2019 Fuel Injection Pump #70645322
11/85
ITEM44
PART NO.4051015
QTY.6
INJECTION PUMP PARTS (Continued)DESCRIPTIONSHELL, tappet (When making first replacement on early units also
order PIN 4051016)4047788 6 PIN, tappet roller (first type, fixed)4 54051016 6 PIN, tappet roller (second type, floating)4372578 6 ROLLER, tappet (first type)464040418 6 ROLLER ASSEMBLY, tappet (second type. Includes bushing whichis not serviced separately)
47 4372577 6 BUSHING, tappet roller (Used only with ROLLER 4372578)48 4040118 6 ['GASKET, guide screw49 4040283 6 SCREW, tappet guide50 4372153 6 PLUG, base51 4372065 6 Di GASKET, base plug52 4372076 6 OWIPER, camshaft (felt)53 1 COVER, control rack54 4040423 1 BUSHING, control rack cover (threaded)55 4040285 1 SCREW, control rack
4040224 A SPACER, control rack .002" thick)4040225 A SPACER, control rack (.003" thick)4040226 A SPACER, control rack (.004" thick)
For factory use only56 4040227 A SPACER, control rack (.010" thick)4040228 A SPACER, control rack (.020" thick)4040229 A SPACER, control rack (.040" thick)4040230 A SPACER, control rack (.094" thick)
57 1 RACK, control58 4040281 1 SCREW, guide, control rack59 4040110 2 BUSHING, control rack6 0 4040263 1 GASKET, oil baffle6 1 4040105 1 BAFFLE, oil
919804 2 SCREW, self tapping, rd-hd., #10 x 3/8"6 2 920167 1 SCREW, self-tapping, fl-hd., #6 x 1/4"6 3 919840 2 PLUG, pipe, hex-hd., 1/4"NPT
Also see PACKAGED PARTSA Use as required
(Continued)
-
8/22/2019 Fuel Injection Pump #70645322
12/85
ITEM6 46 56 66 76 86 9
PART NO,4505556
4051304404101540506854372181
INJECTION PUMP PARTS (Continued)QTY. DESCRIPTION
1 VALVE ASSEMBLY, overflow (Consists of items 65 thru 68)1 BODY, valve (Not serviced. Order item 64)1 SCREW, valve spring1 VALVE1 SPRING, valve1 PLUG, overflow fitting
70 4372114 1 GASKET, adapting plug71 4372170 1 PLUG, adapting, fuel supply line72 4040282 1 PLUG, fuel supply line connection (shipping only)73 1 LEVER ASSEMBLY, shut-off73A 4372186 1 SCREW, clamping
4043006 1 LOCKWASHER4372132 1 NUT4372129 1 PIN, cotter (Early units only)
74 4372081 1 PIN, swivel, control cable (peened to lever)4372085 1 SCREW, control cable locking
75 4040273 1 WASHER, lever shaft seal76 4040053 1 SEAL, oil, lever shaft77 4040295 1 BUSHING, lever shaft, seal end78 4040242 1 SPACER, stop lever79 4040249 1 SHAFT, shut-off lever
900942 1 PIN, cotter, 3/32" x 5/8"80 4040255 1 LEVER, stop81 4040248 1 SPRING, stop lever82 4040243 1 BUSHING, lever shaft, plug end83 4040272 1 WASHER, retaining84 4040279 1 RING, snap, retaining washer85 4372184 1 PLUG, lever shaft86 4047195 1 PLATE, pump identification
917852 2 SCREW, drive, #0 x 1/8"87 4040235 1 PLATE, caution
917852 2 SCREW, drive #0 x 1/8"88 1 GOVERNOR ASSEMBLY
Also see PACKAGED PARTS
-
8/22/2019 Fuel Injection Pump #70645322
13/85
ME MO
-
8/22/2019 Fuel Injection Pump #70645322
14/85
-
8/22/2019 Fuel Injection Pump #70645322
15/85
GOVERNOR PARTSUSAGE:
ITEM1
2
Typical governor for 779 and 844 engines. See pump assembly listings for specificusage and parts information.PART NO. QTY. DESCRIPTION
4372042 1 CAP, bearing4 5 0 7 1 6 3 2 CAPSCREW, drilled-hd.9 0 5 6 5 7 2 CAPSCREW, 1/4"NC x 1"4043006 4 LOCKWASHER4372059 1 GASKET, bearing cap3 4040472 1 BEARING, ball, weight shaft (small)4 4 3 7 2 1 4 5 1 NUT, bearing retaining4372149 1 LOCKWASHER5 4040052 2 BUSHING, operating shaft6 4372184 1 PLUG, governor housing7 4040053 1 SEAL, oil, operating shaft8 4372043 1 COVER, load and idle stop screw, upper4372159 1 SCREW4372134 1 WASHER
4 3 7 2 1 3 7 2 SCREW, full load and idle stop9 1 1 0 4 0 2 NUT, 1/4"NF1 0 4372044 1 COVER, load and idle stop screw, lower4 3 7 2 1 8 3 2 SCREW4372134 2 WASHER1 1 4372090 1 SHAFT ASSEMBLY, operating (Includes stop and item 12)1 2 , 4 3 7 2 1 5 7 1 SCREW, operating shaft1 3 4 0 5 5 1 3 6 1 LEVER ASSEMBLY, operating (Includes item 14)1 4 4 3 7 2 1 8 6 1 SCREW4043006 1 LOCKWASHER4 3 7 2 1 3 2 1 NUT4372129 1 PIN, cotter (Early units)1 5 4048076 1 PLATE, instruction, oil level and drain917852 2 SCREW, drive, #0 x 1/8"1 6 4372052 1 COCK, oil level1 7 4 3 7 2 1 6 1 1 PLUG, oil drain1 8 4 3 7 2 0 6 0 1 GASKET, oil drain plug1 9 4040390 1 HOUSING ASSEMBLY, governor (Includes items 5, 6, 7,20, 70, 71 and 74372181 1 PLUG (Used on Motor Scrapers only)20 4040054 2 PIN, dowel (locating)21 4 5 0 7 1 6 3 2 SCREW, drilled-hd.9 0 5 6 5 7 7 CAPSCREW, 1/4"NC x 1"4043006 9 LOCKWASHER22 4372056 1 GASKET, governor housing23 4040055 1 SPRING, hub
Also see PACKAGED PARTS
-
8/22/2019 Fuel Injection Pump #70645322
16/85
GOVERNOR PARTS (Continued)ITEM PART NO. QTY. DESCRIPTION
24 4040056 1 HUB, operating shaft25 4372068 1 SEAT, weight spring2627
43721434372102437210343721044372105437210643721074372108
A SPACER,A SPACER,A SPACER,A SPACER,A SPACER,A SPACER,A SPACER,A SPACER,
weightweightweightwe ightweightweightweightweight
shaft innershaft innershaft innershaft innershaft oute rshaft outershaft oute rshaft outer
springspringspr ingspringspringspringspringspring
(.020"(.042"(.058"(.083"(.020"(.042"(.058"(.083"
thick)thick)thick)thick)thick)thick)thick)thick)
28 1 SPRING, governor, inner29 1 SPRING, governor, outer30 4054452 1 SLEEVE ASSEMBLY, sliding, weight shaft (Includes bushing whichis not serviced separately and item 31)31 4054453 1 BEARING, ball, sleeve thrust32 4040020 1 SHAFT, governor weight33 4040072 2 PIN, weight4372129 2 PIN, cotter2 BUSHING, weight2 WASHER, spacing, bushing2 WEIGHT ASSEMBLY (Includes items 34 and 38)4040075404007140400744054291
405429237 4054293
40542944054295
38 404007639 40400784040082404007740 404007941 4040080
A WASHER, spacing,A WASHER, spacing,A WASHER, spacing,A WASHER, spacing,A WASHER, spacing,2 BEARING, needle,
weight bearingweight bearingweight bearingweight bearingweight bearingwe ight
(.036" thick)(. 038" thizck)(.040" thick)(.044" thick)(.048"-thick)
343536
1 PLATE, bearing retaining2 SCREW2 NUT1 RING, snap, bearing1 BEARING, ball, weight shaft (large)(Includes item 40)
A Use as required
-
8/22/2019 Fuel Injection Pump #70645322
17/85
ITEM42
4344
PART NO.40400814372185404008440400864040085
QTY.141
11
GOVERNOR PARTS (Continued)DESCRIPTIONBRIDGE, weight shaft bearing
SCREWGEAR, drivenNUT, gear retaining
LOCKWASHER45 4050452 1 SPRING, weight lubricating plunger46 4372077 1 PLUNGER, weight lubricating47 4040089 1 GEAR ASSEMBLY, drive (Consists of items 50 thru 56)48 4040088 1 WASHER49 4040087 1 NUT50 4040294 1 HUB, drive gear51 4040245 1 GEAR, drive
4372139 A SPACER, gear adjustment (.035" thick)52 4 3 7 2 1 4 0 A SPACER, gear adjustment (.049" thick)
4 3 7 2 1 4 1 A SPACER, gear adjustment (.065" thick)53 4372050 1 DISC, spring, inner54 4372051 1 DISC, spring, outer (blued)55 4040091 1 LOCKWASHER56 4040090 1 NUT57 4050419 1 PIN, control rack58 4040019 1 LINK, connecting59 4372147 1 SCREW, link connecting9 0 6 9 5 8 1 LOCKWASHER, internal teeth, 1/4"4 3 7 2 1 3 2 1 NUT60 4040473 1 LINK, control rack6 1 1 CAM, torque6 2 4372147 1 SCREW906958 1 LOCKWASHER, internal teeth, 1/4"4 3 7 2 1 3 2 1 NUT6 3 1 PLATE, stop4372132 2 NUT6 4 4049066 1 BRIDGE, stop plate9 0 5 6 5 7 2 CAPSCREW, 1/4"NC x 1"4043006 2 LOCKWASHER4507057 2 WASHER, plain6 5 4 0 4 0 0 6 1 1 PIN, control rack link4040059 2 PIN, cotter4 0 4 0 0 6 0 2 WASHER, plain
Also see PACKAGED PARTSA Use as required
-
8/22/2019 Fuel Injection Pump #70645322
18/85
ITEM
66
PART NO.4040057
4040058
QTY.1
1
GOVERNOR PARTS (Continued)DESCRIPTIONLEVER ASSEMBLY, fulcrum (Consists of 1 LEVER 4040058,items 57, 58, 59, 60, 65, 67, 68 and 69)LEVER, fulcrum
6 7 4 0 4 0 0 6 3 1 BRACKET, operating shaft6 8 4040092 1 PIN, fulcrum lever4 3 7 2 1 2 9 1 PIN, cotter6 9 4 0 5 4 4 5 8 2 PIN, pivot, fulcrum lever70 4372135 1 SCREW, bumper spring4 0 4 9 1 3 7 1 LOCKWASHER71 4372099 1 SPRING, bumper (long)72 4040251 1 SPRING, bumper (short)73 4372057 1 GASKET, governor housing cover74 4041083 1 COVER, governor housing4040391 2 PLUG, expansion75 4 5 0 7 1 4 7 2 SCREW, (drilled-hd.)76 4372185 2 SCREW, (short)77 4040277 2 SCREW, (long)4043006 6 LOCKWASHER4507057 4 WASHER, plain (Not used on PUMP ASSEMBLY 4371578)78 4372047 1 CAP, breather79 4 3 7 2 0 6 7 1 GASKET, breather cap80 4372073 1 CAP, adjusting screw81 4372146 1 SCREW, adjusting, bumper spring4 3 7 2 1 3 1 1 NUT82 4372058 2 GASKET, adjusting screw nut83 4047196 1 PLATE, identification917852 2 SCREW, drive #0 x 1/8"84 4355843 A SEAL, anti-tampering (Not included with assembly)
Also see PACKAGED PARTSAUse as required
-
8/22/2019 Fuel Injection Pump #70645322
19/85
PUMP ASSEMBLY 4373409USAGE: HD16A, D tractors with 844 engine prior to engine serial No. 83794. Order PUMP
ASSEMBLY4377690 when replacing complete pumpITEM
1
PART NO.
40496689155144041008
QTY.
111
DESCRIPTIONNOTE: Parts are identical to those shown on pages 5 thru 8 with the
items 2, 59, 60 and 61)following exceptions.
HOUSING ASSEMBLY, pump (IncludesCOCK, drain, 1/8"NPTCOCK, drain 3/8"NPT
4 4040222 1 COVER, transfer pump hole32 4050295 6 PLUNGER ASSEMBLY(Includes barrel)53 4040262 1 COVER, control rack4040278 2 SCREW4040108 2 PLUG, expansion54 1 BUSHING, control rack (Omit this item)57 4050510 1 RACK, control64 1 VALVE ASSEMBLY overflow65 1 BODY valve66 1 SCREW, valve spring Omit these items67 1 VALVE68 1 SPRING, valve73 4040250 1 LEVER ASSEMBLY shut-off (Includes item 73A)74 1
1PIN, swivel ) Omit these itemsSCREW, control cable locking
88 4051731 1 GOVERNOR ASSEMBLYNOTE: Governor parts are identical to those shown on pages 11
exceptions.hru 14 with the following28 4372095 1 SPRING, governor, inner (50/3)29 4372098 1 SPRING, governor, outer (51/10)61 4040064 1 CAM torque63 4043637 1 PLATE, stop (straight)
-
8/22/2019 Fuel Injection Pump #70645322
20/85
PUMP ASSEMBLY 4374619USAGE: HD16A, D tractors with 844 engine effective engine serial No. 83794 thru 16-3013. Order
PUMP ASSEMBLY 4377690 when replacing complete pump.ITEM PART NO. QTY. DESCRIPTION
1 40496689155144041008
111
NOTE: Parts are identical to those shown on pages 5 thru 8 with the
items 2, 59, 60 and 61)following exceptions:
HOUSING ASSEMBLY, pump (IncludesCOCK, drain, 1/8"NPTCOCK, drain, 3/8"NPT4 4040222 1 COVER, transfer pump hole
32 4050295 6 PLUNGER ASSEMBLY (Includes barrel)53 4040262 1 COVER, control rack
4040278 2 SCREW4040108 2 PLUG, expansion
54 1 BUSHING, control rack (Omit this item)57 4050510 1 RACK, control64 1 VALVE ASSEMBLY, overflow6 5 1 BODY, valve66 1 SCREW, valve spring Omit these items6 7 1 VALVE6 8 1 SPRING, valve73 4040250 1 LEVER ASSEMBLY, shut-off (Includes item 73A)7 4 1
1PIN, swivel ) Omit these itemsSCREW, control cable locking
88 4051731 1 GOVERNOR ASSEMBLYNOTE: Governor parts are identical to those shown on pages 11 thru14 with the following exceptions:
28 4372095 1 SPRING, governor, inner(50/3)29 4372098 1 SPRING, governor, outer (51/ 10)61 4040064 1 CAM, torque6 3 4043637 1 PLATE, stop (straight)
-
8/22/2019 Fuel Injection Pump #70645322
21/85
PUMP ASSEMBLY 4377690USAGE: HD16A, D tractors with 844 engine effective engine serial No. 16-3014ITEM PART NO. QTY. DESCRIPTION
1 4049668437218191551440402824041008
11112
NOTE: Parts are identical to those shown on pages 5 thru 8 with
(Includes items 2,59,60 and 61)the following exceptions:
HOUSING ASSEMBLY, pumpPLUG, 1/8"NPTCOCK, drain, 1/8"NPTPLUG, 3/8"NPTCOCK, drain, 3/8"NPT
4 4040222 1 COVER, transfer pump hole32 4050295 6 PLUNGER ASSEMBLY(Includes barrel)52 6 WIPER (Omit this item)53 4040262 1 COVER, control rack4040278 2 SCREW4040108 2 PLUG, expansion54 1 BUSHING, control rack (Omit this item)55 1 SCREW, control rack
A SPACER, control rackA SPACER, control racki SPACER, control rack
56 A SPACER, control rack Omit these itemsA SPACER, control rackA SPACER, control rackA SPACER, control rack
57 4050510 1 RACK, control64 1 VALVE ASSEMBLY overflow65 1 BODY valve66 1 SCREW, valve spring Omit these items67 1 VALVE68 1 SPRING, valve69 1 PLUG, overflow fitting (Omit this item)73 4040250 1 LEVER ASSEMBLY shut-off (Includes item 73A)74 1 PIN, swivel
1 SCREW, control cable locking ) O it these items87 1 PLATE, caution---- - 2 SCREW, drive Omit these items)88 4051731 1 GOVERNOR ASSEMBLY
NOTE: Governor parts are identical to those shown on pages 11 thru14 with the following exceptions:
28 4372095 1 SPRING, governor, inner (50/3)29 4372098 1 SPRING, governor, outer (51/10)
-
8/22/2019 Fuel Injection Pump #70645322
22/85
PUMP ASSEMBLY 4373408USAGE: HD16AC, DC, FC, GC tractors with 844 engine prior to engine serial No. 83559. Order
PUMP ASSEMBLY4377691 when replacing complete pumpITEM PART NO. QTY. DESCRIPTION
1
43253
40496689155144041008404022240502954040262
111
1
61
NOTE: Parts are identical to those shown on pages 5 thru 8 with the
items 2, 59,60 and 61)
barrel)
following exceptions:HOUSING ASSEMBLY, pump (Includes
COCK, drain, 1/8"NPTCOCK, drain, 3/8"NPT
COVER, transfer pump holePLUNGER ASSEMBLY (IncludesCOVER, control rack
4040278 2 SCREW4040108 2 PLUG, expansion54 1 BUSHING, control rack (Omit this item)57 4050510 1 RACK, control64 1 VALVE ASSEMBLY overflow65 1 BODY valve66 1 SCREW, valve spring Omit these items67 1 VALVE68 1 SPRING, valve73 40402 50 1 LEVER ASSEMBLY shut-off (Includes item 73A)74 1 PIN, swivel
1 SCREW, control cable locking Omit these items)88 4051728 1 GOVERNOR ASSEMBLY
NOTE: Governor parts are identical to those shown on pages 11 thru14 with the following exceptions:
28 4372095 1 SPRING, governor, inner (50/3)29 4372097 1 SPRING, governor, outer (51/1)61 4040107 1 CAM torque63 4048227 1 PLATE, stop (7 decrease)
-
8/22/2019 Fuel Injection Pump #70645322
23/85
PUMP ASSEMBLY 4374620USAGE: HD16AC, DC, FC, GC tractors with 844 engine effective engine serial No. 83559 thru
16-3012. Order PUMP ASSEMBLY4377691 when replacing complete pumpITEM PART NO. QTY. DESCRIPTION
NOTE: Parts are identical to those shown on pages 5 thru 8 with thefollowing exceptions:
1 4049668 1 HOUSING ASSEMBLY pump (Includes items 2, 59, 60 and 61)915514 1 COCK, drain, 1/8"NPT4041008 1 COCK, drain, 3/8"NPT4 4040222 1 COVER, transfer pump hole32 4050295 6 PLUNGER ASSEMBLY(Includes barrel)53 4040262 1 COVER, control rack4040278 2 SCREW4040108 2 PLUG, expansion54 1 BUSHING, control rack (Omit this item)57 4050510 1 RACK, control64 1 VALVE ASSEMBLY overflow65 1 BODY valve66 1 SCREW, valve spring Omit these items67 1 VALVE68 1 SPRING, valve73 4040250 1 LEVER ASSEMBLY shut-off (Includes item 73A)74 1 PIN, swivel
1 SCREW, control cable locking ) Omit these items88 4051728 1 GOVERNOR ASSEMBLYNOTE: Governor parts are identical to those shown on pages 11 thru14 with the following exceptions.28 4372095 1 SPRING, governor, inner (50/3)29 4372097 1 SPRING, governor, outer (51/1)61 4040107 1 CAM torque63 4048227 1 PLATE, stop (7 decrease)
-
8/22/2019 Fuel Injection Pump #70645322
24/85
PUMP ASSEMBLY 4377691USAGE: HD16AC, DC, FC, GC tractors with 844 engine effective engine serial No. 16-3013ITEM PART NO. QTY. DESCRIPTION
1 4049668437218191551440402824041008
11112
NOTE: Parts are identical to those shown on pages 5 thru 8 with the
(Includes items 2,59,60 and 61)following exceptions:
HOUSING ASSEMBLY, pumpPLUG, 1/8"NPTCOCK, drain, 1/8"NPTPLUG, 3/ 8"NPTCOCK, drain, 3/8"NPT
4 4040222 1 COVER, transfer pump hole32 4050295 6 PLUNGER ASSEMBLY(Includes barrel)52 6 WIPER (Omit this item)53 4040262 1 COVER, control rack4040278 2 SCREW4040108 2 PLUG, expansion54 1 BUSHING, control rack (Omit this item)55 1 SCREW, control rack
A SPACER, control rackA SPACER, control rackA SPACER, control rack
56 A SPACER, control rack Omit these itemsA SPACER, control rackA SPACER, control rackA SPACER, control rack
57 4050510 1 RACK, control64 1 VALVE ASSEMBLY overflow65 1 BODY valve66 1 SCREW, valve spring Omit these items67 1 VALVE68 1 SPRING, valve69 1 PLUG, overflow fitting (Omit this item)73 4040250 1 LEVER ASSEMBLY shut-off (Includes item 73A)74 1 PIN, swivel
1 SCREW, control cable locking Omit these items87 12 PLATE, caution ) Omit these itemsSCREW, drive88 4051728 1 GOVERNOR ASSEMBLY
NOTE: Governor parts are identical to those shown on pages 11 thru14 with the following exceptions:
28 4372095 1 SPRING, governor, inner (50/3)29 4372097 1 SPRING, governor, outer (51/1)61 4040107 1 CAM torque63 4048227 1 PLATE, stop (7 decrease)
-
8/22/2019 Fuel Injection Pump #70645322
25/85
PUMP ASSEMBLY 4373407USAGE: 1-1D21A, F, G tractors with 844 engine prior to engine serial No. 83490. Order PUMP
ASSEMBLY 4377692 when replacing complete pump.ITEM
1
PART NO,
40496689155144041008
QTY,
111
DESCRIPTIONNOTE: Parts are identical to those shown on pages 5 thru 8 with the
items 2, 59, 60 and 61)following exceptions:
HOUSING ASSEMBLY, pump (IncludesCOCK, drain, 1/8"NPTCOCK, drain 3/8"NPT4 4040222 1 COVER, transfer pump hole
32 4050295 6 PLUNGER ASSEMBLY (Includes barrel)53 4040262 1 COVER, control rack
4040278 2 SCREW4040108 2 PLUG, expansion
5 4 1 BUSHING, control rack (Omit this item)57 4050510 1 RACK, control64 1 VALVE ASSEMBLY, overflow6 5 1 BODY, valve6 6 1 SCREW, valve spring Omit these items6 7 1 VALVE6 8 1 SPRING, valve73 4040250 1 LEVER ASSEMBLY, shut-off (Includes item 73A)74 1
1PIN, swivel ) Omit these itemsSCREW, control cable locking
88 4040736 1 GOVERNOR ASSEMBLYNOTE: Governor parts are identical to those shown on pages 11 thru14 with the following exceptions:
28 4040247 1 SPRING, governor, inner (50/2)2 9 4372098 1 SPRING, governor, outer (51/10)6 1 4040107 1 CAM, torque6 3 4040292 1 PLATE, stop (7 decrease)
-
8/22/2019 Fuel Injection Pump #70645322
26/85
PUMP. ASSEMBLY. 4374621USAGE: HD21A,F,G tractors with 844 engine effective engine serial No. 83490 thru 21-2010.
Order PUMP ASSEMBLY4377692 when replacing complete pump.
ITEM PART NO. QTY. DESCRIPTIONNOTE: Parts are identical to those shown on pages 5 thru 8 with the
following exceptions:1 4049668 1 HOUSING ASSEMBLY pump (Includes items 2,59,60 and 61)915514 1 COCK, drain, 1/8"NPT4041008 1 COCK, drain, 3/8"NPT4 4040222 1 COVER, transfer pump hole
32 4050295 6 PLUNGER ASSEMBLY(Includes barrel)53 4040262 1 COVER, control rack4040278 2 SCREW
4040108 2 PLUG, expansion54 1 BUSHING, control rack (Omit this item)57 4050510 1 RACK, control64 1 VALVE ASSEMBLY overflow65 1 BODY valve6 6 1 SCREW, valve spring Omit these items67 1 VALVE68 1 SPRING, valve73 4040250 1 LEVER ASSEMBLY shut-off (Includes item 73A)74 1 PIN, swivel
1
88 4040736 1 GOVERNOR ASSEMBLYNOTE: Governor parts are identical to those shown on pages 11 thru
14 with the following exceptions:28 4040247 1 SPRING, governor, inner (50/2)29 4372098 1 SPRING, governor, outer (51/10)61 4040107 1 CAM torque63 4040292 1 PLATE, stop (7 decrease)
)SCREW, control cable locking Omit these items
-
8/22/2019 Fuel Injection Pump #70645322
27/85
PUMP ASSEMBLY 4377692USAGE: Service replacement for HD21A, F, G tractors with 844 engine prior to engine
serial No. 21-2011ITEM PART NO. QTY. DESCRIPTION
NOTE: Parts are identical to those shown on pages 5 thru 8 with thefollowing exceptions:1 4049668 1 HOUSING ASSEMBLY, pump (Includes items 2, 59, 60 and 61)
4372181 1 PLUG, 1/ 8"NPT915514 1 COCK, drain, 1/8"NPT4040282 1 PLUG, 3/ 8"NPT4041008 2 COCK, drain, 3/8"NPT4 4040222 1 COVER, transfer pump hole
32 4050295 6 PLUNGER ASSEMBLY (Includes barrel)52 6 WIPER (Omit this item)53 4040262 1 COVER, control rack
4040278 2 SCREW4040108 2 PLUG, expansion
54 1 BUSHING, control rack (Omit this item)55 1 SCREW, control rackA SPACER, control rack
A SPACER, control rackA SPACER, control rackA SPACER, control rackA SPACER, control rackA SPACER, control rackA SPACER, control rack
56 Omit these items
576 46 56 6
4050510 1111
RACK, controlVALVE ASSEMBLY, overflowBODY, valveSCREW, valve spring ) Omit these items
6 7 1 VALVE6 8 1 SPRING, valve6 9 1 PLUG, overflow fitting (Omit this item)73 4040250 1 LEVER ASSEMBLY, shut-off {Includes items 73A)74 1 PIN, swivel
1 SCREW, control cable, locking Omit these items)87 1
2PLATE, caution ) Omit these itemsSCREW, drive
88 4040736 1 GOVERNOR ASSEMBLYNOTE: Governor parts are identical to those shown on pages 11 thru14 with the following exceptions:
28 4040247 1 SPRING, governor, inner (50/2)29 4372098 1 SPRING, governor, outer (51/10)6 1 4040107 1 CAM, torque6 3 4043637 1 PLATE, stop (straight)
-
8/22/2019 Fuel Injection Pump #70645322
28/85
PUMP ASSEMBLY 4376104USAGE.: HD21A, F, G tractors with 844 engine effective engine serial No. 21-2011 thru 21-2363.
Order PUMP ASSEMBLY4377693 when replacing complete pump.ITEM PART NO. QTY. DESCRIPTION
NOTE: Parts are identical, to those shown on pages 5 thru 8 with thefollowing exceptions:
1 4049668 1 HOUSING ASSEMBLY pump (Includes items 2, 59, 60 and 61)915514 1 COCK, drain, 1/8"NPT4041008 1 COCK, drain, 3/8"NPT4 4040222 1 COVER, transfer pump hole32 4050295 6 PLUNGER ASSEMBLY(Includes barrel)53 4040262 1 COVER, control rack4040278 2 SCREW4040108 2 PLUG, expansion54 1 BUSHING, control rack (Omit this item)57 4050510 1 RACK, control64 1 VALVE. ASSEMBLY, overflow65 1 BODY valve66 1 SCREW, valve spring Omit these items67 1 VALVE68 1 SPRING, valve73 4040250 1 LEVER ASSEMBLY shut-off (Includes item 73A)74 1 PIN, swivel
1 SCREW, control cable locking ) Omit these items88 4040736 1 GOVERNOR ASSEMBLYNOTE: Governor parts are identical to those shown on pages 11 thru14 with the following exceptions:28 4040247 1 SPRING, governor, inner (50/2)29 4372098 1 SPRING, governor, outer (51/10)61 4040107 1 CAM torque63 4043637 1 PLATE, stop (straight)
-
8/22/2019 Fuel Injection Pump #70645322
29/85
PUMP ASSEMBLY 4377693USAGE: Service replacement for HD21A, F, G tractors with 844 engine effective engine serial
No. 21-2011 thru 21-2363ITEM PART NO. QTY. DESCRIPTION
NOTE: Parts are identical to those shown on pages 5 thru 8 with thefollowing exceptions:1 4049668 1 HOUSING ASSEMBLY, pump (Includes items 2, 59,60 and 61)4372181 1 PLUG, 1/8"NPT915514 1 COCK, drain, 1/8"NPT4040282 1 PLUG, 3/ 8"NPT4041008 2 COCK, drain, 3/8"NPT4 4040222 1 COVER, transfer pump hole
32 4050295 6 PLUNGER ASSEMBLY (Includes barrel)52 6 WIPER (Omit this item)53 4 0 4 0 2 6 2 1 COVER, control rack4040278 2 SCREW4 0 4 0 1 0 8 2 PLUG, expansion54 1 BUSHING, control rack (Omit this item)55 1 SCREW, control rackA SPACER, control rack
A SPACER, control rackA SPACER, control rack
56 A SPACER, control rackA SPACER, control racki SPACER, control rackA SPACER, control rack57 4 0 5 0 5 1 0 1
6 4 16 5 166 16 7 16 8 16 9 173 4040250 1 LEVER ASSEMBLY, shut-off (Includes item 73A)74 1 PIN, swivel
1 SCREW, control cable locking ) Omit these items87 1 PLATE, caution2 SCREW, drive ) Omit these items88 4040736 1 GOVERNOR ASSEMBLYNOTE: Governor parts are identical to those shown on pages 11 thr14 with the following exceptions:28 4040247 1 SPRING, governor, inner (50/2)29 4372098 1 SPRING, governor, outer (51/10)6 1 4 0 4 0 1 0 7 1 CAM, torque6 3 4043637 1 PLATE, stop (straight)
Omit these items
RACK, controlVALVE ASSEMBLY,BODY, valveSCREW, valve springVALVESPRING, valvePLUG, overflow fitting (Omit this
overflow
Omit these items
item)
-
8/22/2019 Fuel Injection Pump #70645322
30/85
PUMP ASSEMBLY 4376845USAGE: HD21A, F, G tractors with 844 engne effective with engne seria No. 21-2364ITEM PART NO. QTY. DESCRIPTION
1 4049668437218191551440402824041008
11112
NOTE: Parts are identica to thoseshown on pages 5 thru 8 with theitems 2, 59, 60 and 61)
following exceptions:HOUSING ASSEMBLY, pump (IncludesPLUG, 1/8"NPTCOCK, dran, 1/8"NPTPLUG, 3/ 8"NPTCOCK, dran, 3/8"NPT
4 4040222 1 COVER, transfer pump hole32 4050295 6 PLUNGER ASSEMBLY (Includes barre)52 6 WIPER (Omt this item)53 4040262 1 COVER, control rack4040278 2 SCREW4040108 2 PLUG, expansion54 1 BUSHING, control rack (Omt this item)55 1 SCREW, control rack
A SPACER, control rackA SPACER, control rack
56AA
SPACER, control rackSPACER, control rack - Omt these items
A SPACER, control rackA SPACER, control rackA SPACER, control rack
5764656 6676 8
4050510 111111
RACK, controlVALVE ASSEMBLY, overflowBODY, vaveSCREW, vave springVALVESPRING, vave
Omt these items
6 9 1 PLUG, overflow fitting (Omt this item)73 4040250 1 LEVER ASSEMBLY, shut-off (Includes item73A)74 1 PIN, swive
1 SCREW, control cable locking Omt these items)87 1 PLATE, caution2 SCREW, drive Omt these items88 4051737 1 GOVERNOR ASSEMBLY
NOTE: Governor parts are identica to those shown on pages 11 thru14 with the following exceptions:28 4040247 1 SPRING, governor, inner (50/ 2)29 4372098 1 SPRING, governor, outer (51/10)6 1 4040107 1 CAM, torque63 4043637 1 PLATE, stop (straght)
-
8/22/2019 Fuel Injection Pump #70645322
31/85
PUMP ASSEMBLY 4371578USAGE: 200 Motor Scraper with 779 engine, 300 Motor Scraper with 844 engine effective
engine serial No. 39956 thru 50531)ITEM PART NO. QTY. DESCRIPTION
1
4
3253
40403879155144041008
4 0 4 0 4 1 643720754040424
121
1
611
NOTE: Parts are identical to those shown on pages 5 thru 8 with the
items 2, 59, 60 and 61)
Parts List 184205 for TS200 and
barrel)
following exceptions:HOUSING ASSEMBLY, pump (IncludesCOCK, drain, 1/8"NPT
COCK, drain, 3/8"NPTPUMP ASSEMBLY, transfer (See
Parts List 184204 for TS300)PLUNGER ASSEMBLY (IncludesCOVER, control rack
WASHER, locking55 1 SCREW, control rack
A SPACER, control rackA SPACER, control rackA SPACER, control rack Omit these items
56 L S SPACER, control rackA SPACER, control rackA SPACER, control rackA SPACER, control rack
57 4040420 1 RACK, control63 919840 2 PLUG, pipe (Change quantity to 1)73 4040422 1 LEVER ASSEMBLY shut-off (Includes items 73A and 74)88 4040425 1 GOVERNOR ASSEMBLY
NOTE: Governor parts are identical to those shown on pages 11 thru14 with the following exceptions:
13 1 LEVER ASSEMBLY operating (Change to 4364510 LEVER whichdoes not include SCREW 4372186)28 4040247 1 SPRING, governor, inner (50/2)29 4372097 1 SPRING, governor, outer (51/1)61 4040064 1 CAM torque63 4043637 1 PLATE, stop (straight)74 1 COVER, governor housing (Change part No. to 4372045)77 2 SCREW (long) (Change part No. to 4372148)
-
8/22/2019 Fuel Injection Pump #70645322
32/85
PUMP ASSEMBLY 4372399USAGE: 260 Motor Scraper with 844 engine prior to engine serial No. 84091. Order PUMP
ASSEMBLY4374394 when replacing complete pump
ITEM
1
43253
PART NO.
404038791551440410084342417404041643720754040424
QTY.
121
1
611
DESCRIPTIONNOTE: Parts are identical to those shown on pages 5 thru 8 with the
(Includes items 2, 59, 60 and 61)
(See page 33 for parts)barrel)
following exceptions:HOUSING ASSEMBLY, pump
COCK, drain, 1/8"NPTCOCK, drain, 3/8"NPT
PUMP ASSEMBLY, transferPLUNGER ASSEMBLY (IncludesCOVER, control rack
WASHER, locking55 1 SCREW, control rack
A SPACER, control rackA SPACER, control rackA SPACER, control rack Omit these items56 A SPACER, control rackA SPACER, control rackA SPACER, control rackA SPACER, control rack
57 4040420 1 RACK, control6 3 919840 2 PLUG, pipe (Change quantity to 1)73 4040422 1 LEVER ASSEMBLY shut-off (Includes items 73A and 74)88 4051792 1 GOVERNOR ASSEMBLY
NOTE: Governor parts are identical to those shown on pages 11 thruexceptions:4 with the following
28 4372095 1 SPRING, governor, inner (50/3)29 4372097 1 SPRING, governor, outer (51/1)61 4040064 1 CAM torque63 4043637 1 PLATE, stop (straight)
-
8/22/2019 Fuel Injection Pump #70645322
33/85
PUMP ASSEMBLY 4374394USAGE: 260 Motor Scraper with 844 engine effective engine serial No. 84091ITEM PART NO. QTY. DESCRIPTION
NOTE: Parts are identical to those shown on pages 5 thru 8 with thefollowing exceptions:1 4040387 1 HOUSING ASSEMBLY, pump (Includes items 2, 59,60 and 61)915514 2 COCK, drain, 1/8"NPT4041008 1 COCK, drain, 3/8"NPT4 4049755 1 PUMP ASSEMBLY, transfer (See page 33 for parts)32 4040416 6 PLUNGER ASSEMBLY (Includes barrel)
53 4372075 1 COVER, control rack4040424 1 WASHER, locking
55 1 SCREW, control rackA SPACER, control rackA SPACER, control rackA SPACER, control rack
56 A SPACER, control rackA SPACER, control rackA SPACER, control rackA SPACER, control rack
4040420 1 RACK, control919840 2 PLUG, pipe (Change quantity to 1)4040422 1 LEVER ASSEMBLY, shut-off (Includes items 73A and 74)4 0 5 1 7 9 2 1 GOVERNOR ASSEMBLY
NOTE: Governor parts are identical to those shown on pages 11 thru14 with the following exceptions:4372095 1 SPRING, governor, inner (50/3)4372097 1 SPRING, governor, outer (51/1)4040064 1 CAM, torque4 0 4 3 6 3 7 1 PLATE, stop (straight)
576 37388
28
296 16 3
Omit these items
-
8/22/2019 Fuel Injection Pump #70645322
34/85
PUMP ASSEMBLY 4373410USAGE: 300 Motor Scraper with 844 engine effective engine serial No. 50532, 360 Motor Scraperwith 844 engine prior to engine serial No. 84884. Order PUMP ASSEMBLY 4374622
when replacing complete pump.ITEM PART NO. QTY, DESCRIPTION
1
4
40403879155144041008
121
1
NOTE: Parts are identical to those shown on pages 5 thru 8 with the
(Includes items 2, 59, 60 and 61)
(See Parts List 184204 for TS300 and
following exceptions:HOUSING ASSEMBLY, pumpCOCK, drain, 1/8"NPTCOCK, drain, 3/8"NPTPUMP ASSEMBLY, transferParts List 184201 for TS360)
32 4040416 6 PLUNGER ASSEMBLY (Includes barrel)53 4372075 1 COVER, control rack4040424 1 WASHER, locking55 1 SCREW, control rack
A SPACER, control rackA SPACER, control rackA SPACER, control rack Omit these items
56 A SPACER, control rackA SPACER, control rackA SPACER, control rackA SPACER, control rack
57 4040420 1 RACK, control6 3 919840 2 PLUG, pipe (Change quantity to 1)73 4040422 1 LEVER ASSEMBLY, shut-off (Includes items 73A and 74)88 4051725 1 GOVERNOR ASSEMBLY
NOTE: Governor parts are identical to those shown on pages 11 thru14 with the following exceptions:2 8 4372095 1 SPRING, governor, inner (50/3)29 4372098 1 SPRING, governor, outer (51/10)6 1 4040064 1 CAM, torque6 3 4043637 1 PLATE, stop (straight)
-
8/22/2019 Fuel Injection Pump #70645322
35/85
1
1
PUMP ASSEMBLY 4374622USAGE: 360 Motor Scraper with 844 engine effective engine serial No. 84884ITEM PART NO. QTY. DESCRIPTION
NOTE: Parts are identical to those shown on pages 5 thru 8 with thefollowing exceptions:1 HOUSING ASSEMBLY pump (Includes items 2, 59, 60 and 61)2 COCK, drain, 1/8"NPT1 COCK, drain, 3/8"NPT1 PUMP ASSEMBLY, transfer (See Parts List 184201)6 PLUNGER ASSEMBLY(Includes barrel)1 COVER, control rack1 WASHER, locking1 SCREW, control rack
SPACER, control rackSPACER, control rackSPACER, control rackSPACER, control rack
A SPACER, control rackA SPACER, control rack
SPACER, control. rackRACK, controlPLUG, pipe (Change quantity to 1)LEVER ASSEMBLY shut-off (Includes items 73A and 74)GOVERNOR ASSEMBLYNOTE: Governor parts are identical to those shown on pages 11 thru
14 with the following exceptions:1 SPRING, governor, inner (50/3)1 SPRING, governor, outer (51/10)1 CAM torque1 PLATE, stop (straight)
1 404030791551440410084
32 404041653 4372075.404042455
56
57 404042063 91984073 404042288 4051725
28 437209529 43720986 1 40400646 3 4043637
Omit these items
-
8/22/2019 Fuel Injection Pump #70645322
36/85
18 209 PUMP ASSEMBLY 4049755
1 311 5 - - - , h i /
l7TalmEin21 22 23
t1 41 ,41,1,1(
14 1 6 1 7
PUMPASSEMBLY 4055468
24 2 1 221 2321 10 1 11 111 1
[EARLY UNITS10 11 12PUMP ASSEMBLY 4342417
T-39339TRANSFER PUMP PARTS
-
8/22/2019 Fuel Injection Pump #70645322
37/85
TRANSFER PUMP PARTS
ITEM PART NO. QUANTITY* ** ***
* 4342417 PUMP ASSEMBLY (See page 28)** 4049755 PUMP ASSEMBLY (See pages 29, 58, 59, 60, 61, 62,6 3 , 6 4 , 6 5 )*** 4055468 PUMP ASSEMBLY (See pages 51, 52, 53, 56, 57, 58,6 0, 61, 6 4 , 6 5 )DESCRIPTION
1 4040994 1 - - PRIMER ASSEMBLY, hand (Includes items 2 thru 9)2 4040993 1 - - STEM ASSEMBLY, plunger (Includes knob)3 4040995 1 - - BARREL, plunger4 4040996 1 - - GASKET, plunger stem (copper) (late units)5 4040997 1 - - PLUNGER, primer6 4040998 1 1 - RING, plunger sealing7 4 0 4 1 0 0 0 1 - - NUT, plunger retaining (late units)8 4 3 7 2 0 6 6 1 1 - GASKET, plunger barrel9 4 0 4 1 0 0 1 1 1 - ADAPTER, plunger barrel
1 0 1 GASKET, plunger stem (rubber)1 1 1 WASHER, stem gasket Early units. Orderitems 4 and 7.1 2 1 - - NUT, plunger retaining1 3 4049703 - 1 - PRIMER ASSEMBLY, hand (Includes items 6 , 8, 9 and 14 thru 21 4 4 0 4 1 3 4 1 - 1 - KNOB, primer1 5 4041340 - 1 - PIN, primer knob1 6 4 0 4 1 3 4 3 - 1 - NUT, plunger barrel1 7 4 0 4 1 3 3 9 1 - SPRING1 8 4 0 4 1 3 4 2 - 1 - WASHER1 9 4041344 - 1 - BARREL, plunger20 4041345 - 1 - PLUNGER ASSEMBLY21 4372119 2 2 2 GASKET22 4 3 7 2 1 0 1 2 2 2 SPRING, valve23 4 3 7 2 1 1 0 2 2 2 VALVE24 4372087 1 1 2 SCREW, retaining, valve spring25 4 3 7 2 1 5 0 1 1 1 ROLLER, tappet26 4 3 7 2 1 1 2 1 1 1 PIN, tappet roller27 4372084 1 1 1 SHELL, tappet28 4 3 7 2 1 2 2 1 1 1 SPRING, tappet
-
8/22/2019 Fuel Injection Pump #70645322
38/85
TRANSFER PUMP PARTS (Continued)QUANTITY DESCRIPTIONTEM PART NO, * ** ***
4040793 1 1 14040794 1 1 14372111 1 1 14040795 1 1 14040796 1 1 1
29 4040797 1 1 14040798 1 1 14040799 1 1 14040800 1 1 14040801 1 1 14040802 1 1 1
30 4372142 1 1 131 4372070 1 1 1
32
40407424040790
4372082
1
1
1
1
1
1
1
1
1
4040791 1 1 14040792 1 1 1
33 4372094 1 1 134 4372116 1 1 135 4372086 1 1 1
SPINDLE (4.993-4. 995 MMdiam. red one end)SPINDLE (4.995-4. 997 MMdiam. blue one end)SPINDLE (4.997-4. 999 MM diam. yellow one end)SPINDLE (5.087-5. 089 MMdiam. white one end)SPINDLE (5.089-5. 091 MMdiam. black one end)SPINDLE (5.091-5. 093 MMdiam. green one end)SPINDLE (5.093-5. 095 MMdiam. aluminum one end)SPINDLE (5. 189-5. 191 MMdiam. red both ends)SPINDLE (5.191-5. 193 MMdiam. blue both ends)SPINDLE (5. 193-5. 195 MMdiam. yellow both ends)SPINDLE (5.195-5. 197 MMdiam. black both ends)PIN, tappet shell re tainingHOUSING, pumpPLUNGER (21.984- 21.989 MMdiam. white dot)PLUNGER (21.986- 21.991 MMdiarn. green dot)
PLUNGER (21.988- 21.993 MMdiam. yellow dot)PLUNGER (21.990- 21.995 MMdiam. red dot)PLUNGER (21.992- 21.997 MMdiam. blue dot)SPRING, plungerGASKET, retaining screwSCREW, retaining, plunger spring
-
8/22/2019 Fuel Injection Pump #70645322
39/85
MEMO
-
8/22/2019 Fuel Injection Pump #70645322
40/85
61 59
1 3 \4
53 54 74560)))
o
'41
(1 173 3
1 4 a 1 1 1 012
47 48 49 50 5 1 58 57 56
0 9 0 oiwzrzyglimmmir
*-111 10MOVONIti4 4 4 5oo690049
21-2 1 22 23 "r17 fs:51 4234 36 37 38 39 "4 0 41
35
0
2 8,129 30 31 32 33
cst;65 64 6 3 62 (V 602 71 70 69 68
T-3 72 30TYPICAL PUMP FOR15000, 16000, 16000H, 19000, 21000, 21000H, 25000 ENGINES
-
8/22/2019 Fuel Injection Pump #70645322
41/85
USAGE:
ITEM
INJECTION PUMP PARTSTypical pump for 15000, 16000, 16000H, 19000, 21000, 21000H, 25000 engines. Seeassembly listings on following pages for specific usage and parts information.
PART NO. QTY. DESCRIPTION1 4 0 5 0 6 8 9 1 HOUSING ASSEMBLY, pump (Includes items 2, 52, 53 and 54)2 4 1 0 3 1 5 0 3 STUD, pump housing4043006 3 LOCKWASHER4040271 3 NUT3 4372062 1 GASKET, transfer pump or cover
1 PUMP ASSEMBLY, transfer41 COVER, transfer pump hole
5 4372064 1 GASKET, inspection cover6 4 0 5 1 9 2 0 1 COVER, inspection4051926 9 SCREW40 53881 9 LOCKWASHER7 4040239 1 PLATE, bearing retaining, rear4 5 0 7 1 4 6 4 SCREW4040276 4 WASHER8 4052614 1 SEAL, oil, camshaft, rear9 4253870 2 BEARING, ball, camshaft
1 0 4050693 1 CAMSHAFT1 1 4040233 1 BEARING, center, camshaft1 2 4 0 4 0 1 1 1 2 GASKET, bearing retaining screw1 3 4040274 2 SCREW, bearing retaining4040275 2 WASHER, plain4047773 2 LOCKWASHER1 4 4040269 1 KEY, flywheel
4040220 L. WASHER, camshaft adjusting (.004" thick)4040221 A WASHER, camshaft adjusting (.006" thick)
1 5 4040289 A WASHER, camshaft adjusting (.008" thick)4040290 A WASHER, camshaft adjusting (.012" thick)4040119 A WASHER, camshaft adjusting (.016" thick)
1 6 4051923 1 SEAL, oil, camshaft, front1 7 4040419 1 GASKET, front plate1 8 4040389 1 PLATE, bearing retaining, front9 1 2 3 2 7 2 CAPSCREW, 1/4"NC x 7/8" (Upper)(Also attaches timingpointer)4372185 2 SCREW, (lower)4043006 4 LOCKWASHER
Also see PACKAGED PARTSAUse as required
-
8/22/2019 Fuel Injection Pump #70645322
42/85
ITEM PART NO. QTY.INJECTION PUMP PARTS (Continued)
DESCRIPTION1 9 4379077 1 POINTER, timing20 4379177 1 FLYWHEEL
904369 1 LOCKWASHER, 3/4"4372251 1 NUT
21 4041148 6 CAP, protecting (plastic)(shipping only)22 4049669 6 NUT, delivery valve holder23 4050691 6 HOLDER, delivery valve24 4049671 6 SPRING, delivery valve25 4050694 6 VALVE ASSEMBLY, delivery (Consists of valve and body.only as a unit)26 4049672 6 GASKET, valve body27 6 PLUNGER ASSEMBLY (Includes barrel)2 8 4040284 6 SCREW, barrel locating29 4040118 6 GASKET, barrel locating screw30 4040103 6 GEAR, segment, control4040280 6 SCREW, clamping (Used prior to pump #915300)4058964 6 SCREW, clamping (Effective with pump #915300)31 4040223 6 SLEEVE, control32 4040234 6 SEAT, plunger spring, upper33 4040293 6 SPRING, plunger34 4040240 6 SEAT, plunger spring, lower35 4043746 6 TAPPET ASSEMBLY (Consists of items 36 thru 41)36 4040112 6 KNOB, tappet37 4040291 6 RING, snap, knob retaining
r 4040114 A SPACER, tappet (.050" thick)4040115 A SPACER, tappet (.054" thick)
38 ( 4040116 A SPACER, tappet (.058" thick)4040113 A SPACER, tappet (. 062" thick)
.. . 4040117 A SPACER, tappet (.066" thick)39 4051015 6 SHELL, tappet40 4051016 6 PIN, tappet roller41 4040418 6 ROLLER ASSEMBLY, tappet (Includes bushing which is notserviced separately)
Also see PACKAGED PARTSA Use as required
Serviced
-
8/22/2019 Fuel Injection Pump #70645322
43/85
ITEM PART NO. QTY.INJECTION PUMP PARTS (Continued)
DESCRIPTION42 4 0 4 0 1 1 8 6 GASKET, guide screw43 4040283 6 SCREW, tappet guide44 4 3 7 2 1 5 3 6 PLUG, base45 4372065 6 GASKET, base plug46 4372075 1 COVER, control rack4372118 1 LOCKWASHER47 4040423 1 BUSHING, control rack cover (threaded)48 4040285 1 SCREW, control rack40 52749 1 PIN, roll
4040224 A SPACER, control rack (.002" thick)4040225 A SPACER, control rack (.003" thick)4040226 A SPACER, control rack (.004" thick) For factory use only
49 4040227 A SPACER, control rack (.010" thick)4040228 A SPACER, control rack (.020" thick)4040229 A SPACER, control rack (.040" thick)4040230 A SPACER, control rack (.094" thick)
50 4 0 5 4 6 0 0 1 RACK, control51 4040281 1 SCREW, guide, control rack52 4040110 2 BUSHING, control rack53 4040263 1 GASKET, oil baffle54 4040105 1 BAFFLE, oil919804 2 SCREW, self tapping, rd-hd., #10 x 3/8"55 919840 2 PLUG, pipe, hex-hd., 1/4"NPT56 4372114 1 GASKET, adapting plug57 4 3 7 2 1 7 0 1 PLUG, adapting, fuel supply line58 4040282 1 PLUG, fuel supply line connection (shipping only)59 1 LEVER ASSEMBLY, shut-off6 0 4372186 1 SCREW, clamping, shut-off lever4043006 1 LOCKWASHER4372132 1 NUT6 1 4372081 1 PIN, swivel, control cable (peened to lever)4372085 1 SCREW, control cable locking6 2 4040273 1 WASHER, lever shaft seal
Also see PACKAGED PARTSAUse as required(Continued)
-
8/22/2019 Fuel Injection Pump #70645322
44/85
(Continued)ITEM PART NO. QTY.
INJECTION PUMP PARTSDESCRIPTION
6 3 4040053 1 SEAL, oil, lever shaft6 4 4040295 1 BUSHING, lever shaft, seal end6 5 4040242 1 SPACER, stop lever66 4040249 1 SHAFT, shut-off lever900942 1 PIN, cotter, 3/32" x 5/8"6 7 4040255 1 LEVER, stop6 8 4040248 1 SPRING, stop lever6 9 4040243 1 BUSHING, lever shaft, plug end70 4040272 1 WASHER, retaining71 4040279 1 RING, snap, retaining washer72 4372184 1 PLUG, lever shaft73 4 0 4 7 1 9 5 1 PLATE, pump identification917852 2 SCREW, drive #0 x 1/8"74 1 GOVERNOR ASSEMBLY
Also see PACKAGED PARTS
-
8/22/2019 Fuel Injection Pump #70645322
45/85
ME MO
41
-
8/22/2019 Fuel Injection Pump #70645322
46/85
FIRST TYPE72
7370 71 72 73 71
54 57 56
[FIRST TYPE7 0 696 7 786 8 C n z t - - - -75 76 74
556165
2 3 2 2 21 1 9 4 2 8 13 1I0
-0 70337 638
40 39 /442 143
12 63 6235
2027 25 1 47 1 1 1 0-t - 2432 28 2631
334,-4 30
CAMSHAFT 294550
46 47 48 49 51 52 53
1 8 1 6 1 5
64 62gMa6312 19 20 11
ASSEMBLED VIEW44
-37231T Y PI CAL GOVERNOR FOR 15000, 16000, 16000H, 19000, 21000, 21000H, 25000 ENGINES
-
8/22/2019 Fuel Injection Pump #70645322
47/85
thick)thick)thick)thick)thick)thick)thick)thick)
Use as required
GOVERNOR PARTSUSAGE: Typical governor for 15000,16000,16000H, 19000, 21000, 21000H, 25000 engines. Seepump assemblylistingsfor specific usage and parts information.ITEM PART NO. QTY. DESCRIPTION
1 CAP, bearing (Used prior to pump #883063)1 CAP, bearing (Used on pump #883063 thru #915299)1 CAP ASSEMBLY, bearing (Includes bushing which is not servicedseparately)(Effective with pump #915300)2 CAPSCREW, drilled-hd.2 CAPSCREW, 1/4"NC x 1"4 LOCKWASHER1 DGASKET, bearing cap (Used prior to pump #883063)1 0-RING, bearing cap (Effective with pump #883063)1 BEARING, ball, weight shaft (small)(Used prior to pump #915300)1 NUT, bearing retaining (Used prior to pump #915300)1 DLOCKWASHER2 BUSHING, operating shaft (bronze.Early units)2 BUSHING, operating shaft (Teflon. Late units)1 PLUG, governor housing1 DSEAL, oil, operating shaft
43720421 4055462
4058860
4507163916285404300643720594058963
3 40404724 4372145
43721494040052
5 40593476 43721847 40400538 4372043 1 COVER, idle stop screw, upper
4372159 1 SCREW4372134 1 WASHER2 SCREW, stop, idle (1/4"NF x 1")(Used prior to pump #951265)2 NUT, 1/4"NF2 SCREW, stop, idle (5/16"NF x 1")(Effective wth pump #951265)2 NUT, 5/16"NF1 COVER, idle stop screw, lower2 SCREW2 WASHER1 SHAFT ASSEMBLY, operating (Includes stop and item 12)1 SCREW, operating shaft1 LEVER ASSEMBLY, operating (Includes item 14)1 SCREWLOCKWASHER1 NUT1 HOUSING ASSEMBLY, governor (Includes items 5,6,7,16,66,67,68.1/4" idle stop screw holes)(Used prior to pump #951265)1 HOUSING ASSEMBLY, governor (Includes items 5,6,7,16,66,67,68.5/16" idle stop screw holes)(Effective with pump #951265)
43721379110409 40593384059337
10 437204443721834372134
1 1 43720901 2 43721571 3 40551361 4 43721864043006437213240506971 5 40593351 6 4040054 21 7 4507163 2
916285 74043006 9
1 8 4372056 11 9 4040055 120 4040056 121 4372068 1
PIN, dowelSCREW, drilled-hd.CAPSCREW, 1/4"NC xLOCKWASHERDGASKET, governor housing
SPRING, hubHUB, operating shaftSEAT, governor spring
43721434372102437210343721044372105437210643721074372108
O SPACER, SPACER,O SPACER,O SPACER, SPACER,O SPACER,O SPACER,O SPACER,
governorgovernorgovernorgovernorgovernorgovernorgovernorgovernor
innerinnerinnerinnerouterouterouterouter
springspringspringspringspringspringspringspring
(. 020"(. 042"(.058"(. 083"(.020"(.042"(.058"(. 083"
22
23
(Continued)43
(Revised October 1967)
-
8/22/2019 Fuel Injection Pump #70645322
48/85
ITEM PART NO.242526 40544522 7 4054453
40400694058864
2 840597724040020
( 4040072294058868
30 f 40400751 405887031 4040071
4040074
405886932
40588614058866 2
1 PLATE, bearing retaining (Used on pump #915300 thru #944011)SCREW
GOVERNOR PAR TS (Continued)QTY. DESCRIPTION
1 SPRING, governor, inner1 SPRING, governor, outer1 SLEEVE ASSEMBLY, sliding, weight shaft (Includes bushing whichis not serviced separately and item 27)1 BEARING, ball, sleeve thrust
1 WEIGHT AND SHAFT ASSY. (Consists of SHAFT 4040020 anditems 29 thru 34)(Used prior to pump #915300)1 WEIGHT AND SHAFT ASSY. (Consists of shaft which is notserviced separately, items 29,30,32,33 and 34)(Effective withpump #915300 thru 979514)1 WEIGHT AND SHAFT ASSY. (Serviced only as a unit)(Effective
with pump #979515)1 SHAFT, governor weight (Used prior to pump #915300)2 PIN, weight (Used prior to pump #915300)2 PIN, cotter2 PIN, weight (Effective with pump #915300 thru #979514)2 BUSHING, weight (Used prior to pump #915300)2 BUSHING, weight (Teflon)(Effective with pump #915300 thru #979514)2 WASHER, spacing, bushing (Used prior to pump #915300)2 WEIGHT ASSEMBLY (Includes items 30 and 34)(Used prior to
pump #915300)2 WEIGHT ASSEMBLY (Includes items 30 and 34)(Effective with
pump #915300 thru #979514)
33
34
35
405429140542924054293405429440542954040182404018340401844040185404018640400764058870404007840400824040077
A WASHER,A WASHER,A WASHER,A WASHER,A WASHER,A WASHER,A WASHER,A WASHER,A WASHER,A WASHER,2 BEARING,
spacing,spacing,spacing,spacing,spacing,spacing,spacing,spacing,spacing,spacing,
weight bearing (. 036" thick)weight bearing (.038" thick)weight bearing (.040" thick)weight bearing (.044" thick)weight bearing (.048" thick)governor weight (.036" thick)governor weight (.038" thick)governor weight (.040" thick)governor weight . 044" thick)governor weight (.048" thick)
Used prior topump #915300
Effective withpump #915300thru #979514needle, weight (Used prior to pump #915300)
2 BUSHING, weight (Teflon)(Effective with pump#915300 thru #979514)1 PLATE, bearing retaining (All pumps except #915300 thru #944011)2 SCREW2 NUT
36 4040079 1 RING, snap, bearing (All pumps except #915300 thru #944011)1 BEARING, ball, weight shaft (Large. Includes item 36)(All pumps
except #915300 thru #944011)1 BEARING, ball, weight shaft (Used on pump #915300 thru #944011)1 BRIDGE, weight shaft bearing(All pumps except #915300 thru#944011)1 PLATE, supporting, weight shaft bearing (pump#915300 thru 944011)4 SCREW4 LOCKWASHER1 SPACER, driven gear (Used prior to pump #915300)1 WASHER, oil slinger (Effective with pump #915300)
/Use as required(Continued)
404008037
4058862404008138 4058863437218540430064055042394059212
44 (Revised October 1967)
-
8/22/2019 Fuel Injection Pump #70645322
49/85
ITEM PART NO. QTY.GOVERNOR PARTS (Continued)
DESCRIPTION40 4040084 1 GEAR, driven41 4040086 1 NUT, gear retaining4040085 1 LOCKWASHER42 4050452 1 SPRING, weight lubricating plunger43 4372077 1 PLUNGER, weight lubricating44 4040089 1 GEAR ASSEMBLY, drive (Consists of items 46 thru 53)45 4040088 1 WASHER4040087 1 NUT46 4040294 1 HUB, drive gear47 4040245 1 GEAR, drive
4372139 A SPACER, gear adjustment (.035" thick)48 43 72140 A SPACER, gear adjustment (.049" thick)
4 3 7 2 1 4 1 A SPACER, gear adjustment (.065" thick)49 4372050 1 DISC, spring, inner50 4372139 1 SPACER, disc (.035" thick)51 4372051 1 DISC, spring, outer (has small drilled hole)52 4040091 1 LOCKWASHER53 4040090 1 NUT54 4050419 1 PIN, control rack4040066 1 WASHER, plain4043006 1 LOCKWASHER43 7213 2 1 NUT55 4053038 1 LINK, control rack56 1 CAM, torque57 43 72147 1 SCREW43 7213 2 1 NUT58 1 PLATE,. stop43 7213 2 2 NUT59 4049066 1 BRIDGE, stop plate9 05657 2 CAPSCREW, 1/4"NC x 1"4043006 2 LOCKWASHER4507057 2 WASHER, plain
40 40 0 6 1 1 PIN, control rack link4040059 2 PIN, cotter )Used prior to pump #8669196 0 4040060 2 WASHER, plain
4054455 1 PIN, control rack link4054454 2 RING, retaining ) Effective with pump #8669194054457 1 LEVER ASSEMBLY, fulcrum (Consists of 1 LEVER 4040058, items
6 1 54, 55, 60, 63, 64 and 65)4040058 1 LEVER, fulcrum Also see PACKAGED PARTSAUse as required(Continued)45
-
8/22/2019 Fuel Injection Pump #70645322
50/85
GOVERNOR PARTS (Continued)ITEM PART NO. QTY. DESCRIPTION
43 72143 A SPACER, operating shaft bracket (.020" thick)43 72102 A SPACER, operating shaft bracket (.042" thick)43 72103 A SPACER, operating shaft bracket (.058" thick)4372104 A SPACER, operating shaft bracket (.083" thick)4043733 A SPACER, operating shaft bracket (.177" thick)405649 2 A SPACER, operating shaft bracket (.276" thick)
6 3 4040063 1 BRACKET, operating shaft6 4 4040092 1 PIN, fulcrum lever4372129 1 PIN, cotter6 5 4054458 2 PIN, pivot, fulcrum lever6 6 4372135 1 SCREW, bumper spring4049 13 7 1 LOCKWASHER6 7 4372099 1 SPRING, bumper (long)6 8 40 40 2 51 1 SPRING, bumper (short)6 9 4372057 1 GASKET, governor housing cover
404108 3 1 COVER, governor housing (Used prior to pump #849997)4040391 2 PLUG, expansion4372047 1 CAP, breather4372067 1 GASKET, breathe r cap4052526 1 COVER, governor housing (Effective with pump #849997)717273
4507147 2 SCREW (drilled-hd.)43 7218 5 2 SCREW (short)(4040277 2 SCREW (long) (Used prior to pump #849997)4 3 7 2 1 4 8 2 SCREW (long) (Effective with pump #849997)4043006 6 LOCKWASHER
74 4372073 1 CAP, adjusting screw 75 43 72146 1 SCREW, adjusting, bumper spring4372 1 31 1 NUT76 4372058 2 GASKET, adjusting screw nut77 4047196 1 PLATE, identification91 7852 2 SCREW, drive, #0 x 1/8"78 4355843 A SEAL, anti-tampering
Also see PACKAGED PARTSAUse as required
6 2
70
-
8/22/2019 Fuel Injection Pump #70645322
51/85
PUMP ASSEMBLY 4379042USAGE: HD16A, D tractors with 16000 engine prior to engine serial No. 16-4587. Order PUMP
ASSEMBLY 4385801 when replacing complete pumpITEM PART NO. QTY. DESCRIPTION
NOTE: Parts are identical to those shown on pages 37 thru 39 withthe following exceptions:
4 4040222 1 COVER, transfer pump hole27 40 50 6 90 6 PLUNGER ASSEMBLY (Includes barrel)46 1 COVER (Change part No. to 4048682)50 1 RACK (Change part No. to 4050510)59 4040250 1 LEVER ASSEMBLY,shut-off (Includes item 60)6 1 1 PIN ) Omit these items1 SCREW74 4051915 1 GOVERNOR ASSEMBLY
NOTE: Governor parts are identical to those shown on pages 41thru 44 with the following exceptions:2 4 4048709 1 SPRING, governor, inner (50/22)25 4372098 1 SPRING, governor, outer (51/10)39 1 SPACER, (Omit this item)54 4050419 1 PIN, control rack
4040066 1 WASHER, plain4043006 1 LOCKWASHER Used only with LINK 40530384372132 1 NUT4040473 1 LINK, control rack (Two-piece) (First-type)554053038 1 LINK, control rack (One-piece)(Second-type)
55A 4040019 1 LINK, connecting4372147 1 SCREW First type. Used only906958 1 LOCKWASHER, internal teeth, 1/4" with LINK 40404734372132 1 NUT (Not illustrated)
56 4040064 1 CAM, torque58 4043637 1 PLATE, stop (straight)
4040057 1 LEVER ASSEMBLY, fulcrum (Consists of 1 LEVER 4040058, items54, 55, 55A, 60, 63, 64 and 65) (First-type)6 2 4054457 LEVER ASSEMBLY, fulcrum (Consists of 1 LEVER 4040058, items54, 55, 60, 63, 64 and 65) (Second-type)
4040058 1 LEVER, fulcrum
47
-
8/22/2019 Fuel Injection Pump #70645322
52/85
PUMP ASSEMBLY 4385801USAGE: HD16A, D tractors with 16000 engine effective engine serial No 16-4587ITEM PART NO. QTY. DESCRIPTION
NOTE: Parts are identical to those shown on pages 37 thru 39 withthe following exceptions:4 4040222 1 COVER, transfer pump hole
27 4050690 6 PLUNGER ASSEMBLY(Includes barrel)59 4040250 1 LEVER ASSEMBLY shut-off (Includes item 60)61 1
1PIN ) Omit this itemSCREW
74 4054459 1 GOVERNOR ASSEMBLYNOTE: Governor parts are identical to those shown on pages 41 thru
44 with the following exceptions:24 4048709 1 SPRING, governor, inner (50/22)25 4372098 1 SPRING, governor, outer (51/10)56 4040064 1 CAM torque58 4043637 1 PLATE, stop (straight)
48
-
8/22/2019 Fuel Injection Pump #70645322
53/85
PUMP ASSEMBLY 4379041USAGE: HD16AC, DC, FC, GC tractors with 16000 engine prior to engine serial No. 16-4560.Order PUMP ASSEMBLY 4385803 when replacing complete pumpITEM PART NO. QTY. DESCRIPTION
NOTE: Parts are identical to those shown on pages 37 thru 39 withthe following exceptions:4 4040222 1 COVER, transfer pump hole
2 7 4050690 6 PLUNGER ASSEMBLY (Includes barrel)46 1 COVER (Change part No. to 4048682)50 1 RACK (Change part No. to 4050510)59 4040250 1 LEVER ASSEMBLY, shut-off (Includes item 60)6 1 1 PIN
1 SCREW ) Omit this item
74 4051914 1 GOVERNOR ASSEMBLYNOTE: Governor parts are identical to those shown on pages 41 thru44 with the following exceptions:
24 4040288 1 SPRING, governor, inner (50/6)25 4372097 1 SPRING, governor, outer (51/1)39 1 SPACER (Omit this item)54 4050419 1 PIN, control rack
4040066 1 WASHER, plain4043006 1 LOCKWASHER Used only with LINK 4053038
)NUT4372132 1
4040473 1 LINK, control rack (Two-piece) (First type)55
(._4053038 1 LINK, control rack (One -piece)(Second type)
55A 4040019 1 LINK, connecting4372147 1 SCREW First type. Used only906958 1 LOCKWASHER, internal teeth, 1/4" with LINK 40404734372132 1 NUT (Not illustrated)
56 4040064 1 CAM, torque58 4048227 1 PLATE, stop (70 decrease)
4040057 1 LEVER ASSEMBLY, fulcrum (Consists of 1 LEVER 4040058, items54, 55, 55A, 60, 63, 64 and 65) (First type)6 2 4054457 1 LEVER ASSEMBLY, fulcrum (Consists of 1 LEVER 4040058, items54, 55, 60, 63, 64 and 65) (Second type)
4040058 1 LEVER, fulcrum
49
-
8/22/2019 Fuel Injection Pump #70645322
54/85
PUMP ASSEMBLY 4385803USAGE: HD16AC, DC, FC, GC tractors with 16000 engine effective with engine serial No. 16-4560ITEM PART NO, QTY. DESCRIPTION
NOTE: Parts are identical to those shown on pages 37 thru 39 withthe following exceptions:
4 4040222 1 COVER, transfer pump hole27 4050690 6 PLUNGER ASSEMBLY(Includes barrel)59 4040250 1 LEVER ASSEMBLY shut-off (Includes item 60)61 1
1PIN ) Omit this itemSCREW
74 4054477 1 GOVERNOR ASSEMBLYNOTE: Governor parts are identical to those shown on pages 41 thru
44 with the following exceptions:24 4040288 1 SPRING, governor, inner (50/6) -25 4372097 1 SPRING, governor, outer (51/1)56 4040064 1 CAM torque58 4048227 1 PLATE, stop (7 decrease)
50
-
8/22/2019 Fuel Injection Pump #70645322
55/85
PUMP ASSEMBLY 4387019USAGE: HD16D tractor with 16000H engine prior to engine serial No. 16-05350. Order PUMPASSEMBLY 4389485 when replacing complete pump.ITEM
427596 1
74
PART NO.
405546840552944040250
4055630
QTY.
1
61
11
1
DESCRIPTIONNOTE: Parts are identical to those shown on pages 36 thru 40 withthe following exceptions:PUMP ASSEMBLY, transfer (See page 33 for parts)PLUNGER ASSEMBLY (Includes barrel)LEVER ASSEMBLY, shut-off (Includes item 60)PIN Omit this itemSCREWGOVERNOR ASSEMBLYNOTE: Governor parts are identical to those shown on pages 42 thru
46 with the following exceptions:9 4372137 2 SCREW (For full load stop use 4048704 (1-1/4" long) )
24 4040288 1 SPRING, governor, (50/6)2 5 4372098 1 SPRING, governor, outer (51/10)56 4040107 1 CAM, torque58 4048227 1 PLATE, stop (7 decrease)
PUMP ASSEMBLY 4389485USAGE: HD16D tractor with 16000H engine effective engine serial No. 16-05350 thru 16-09575
427596 1
405546840552944040250
1
61
11
NOTE: Parts are identical to those shown on pages 36 thru 40 withthe following exceptions:PUMP ASSEMBLY, transfer (See page 33 for parts)PLUNGER ASSEMBLY (Includes barrel)LEVER ASSEMBLY, shut-off (Includes item 60)PIN Omit this itemSCREW
74 4056262 1 GOVERNOR ASSEMBLYNOTE: Governor parts are identical to those shown on pages 42 thru46 with the following exceptions:
9 4372137 2 SCREW (For full load stop use 4048704 (1-1/4" long)24 4372096 1 SPRING, governor, inner (50/16)25 4372098 1 SPRING, governor, outer (51/10)56 4040064 1 CAM, torque58 4040292 1 PLATE, stop (7 decrease)
51
-
8/22/2019 Fuel Injection Pump #70645322
56/85
PUMP ASSEMBLY 4391977USAGE: HD16D tractor with 16000H engine effective engine serial No. 16-09576ITEM PART NO. QTY. DESCRIPTION
420
4055468405901290436943 72251
1
111
NOTE: Parts are identical to those shown on pages 36 thru 40with the following exceptions:PUMP ASSEMBLY, transfer (See page 33 for parts)HUB, pump drivingLOCKWASHERNUT
27 4059009 6 PLUNGER ASSEMBLY (Includes barrel)59 4040250 1 LEVER ASSEMBLY, shut-off (Includes item 60)6 1 1
1PIN )Omit this itemSCREW
74 4059779 1 GOVERNOR ASSEMBLYNOTE: Governor parts are identical to those shown on pages 42
thru 46 with th.e following exceptions:4059338 1 SCREW, stop, low idle (1" long)9 4059339 1 SCREW, stop, high idle (1-1/4" long)4059337 2 NUT, 5/16"NF
24 4372096 1 SPRING, governor, inner (50/16)25 4372098 1 SPRING, governor, outer (51/10)56 4040064 1 CAM, torque58 4040292 1 PLATE, stop (straight)
51 A (Added July 1969)
-
8/22/2019 Fuel Injection Pump #70645322
57/85
-
8/22/2019 Fuel Injection Pump #70645322
58/85
PUMP ASSEMBLY 4387021USAGE: HD16DC tractor with 16000H engine prior to engine serial No. 16-05335. Order PUMPASSEMBLY 4389467 when replacing complete pump.ITEM PART NO. QTY. DESCRIPTION
427596 1
74
4 0 5 5 4 6 840552944040250
4055629
1
61
11
1
NOTE: Parts are identical to those shown on pages 37 thru 39 withthe following exceptions:PUMP ASSEMBLY, transfer (See page 33 for parts)PLUNGER ASSEMBLY (Includes barrel)LEVER ASSEMBLY, shut-off (Includes item 60)PIN j Omit this itemSCREWGOVERNOR ASSEMBLYNOTE: Governor parts are identical to those shown on pages 41thru 44 with the following exceptions:
9 4372137 2 SCREW (For full load stop use 4048704 (1-1/4" long) )24 4040288 1 SPRING, governor, inner (50/6)25 4372098 1 SPRING, governor, outer (51/10)56 4040107 1 CAM, torque58 4048 227 1 PLATE, stop (7 decrease)
PUMP ASSEMBLY 4387645USAGE: HD16DP tractor with 16000H engine prior to engine serial No. 16-05321. Order PUMPASSEMBLY 4389467 when replacing complete pump.
427596 1
405546840552944040250
1
61
11
NOTE: Parts are identical to those shown on pages 37 thru 39 withthe following exceptions:PUMP ASSEMBLY, transfer (See page 33 for parts)PLUNGER ASSEMBLY (Includes barrel)LEVER ASSEMBLY, shut-off (Includes item 60)PIN ) Omit this itemSCREW
(Continued)
52
-
8/22/2019 Fuel Injection Pump #70645322
59/85
ITEM PART NO, QTY.PUMP ASSEMBLY 4387645 (Continued)
DESCRIPTION74 4055628 1 GOVERNOR ASSEMBLY
NOTE: Governor parts are identical to those shown on pages 42 thru46 with the following exceptions:9 4372137 2 SCREW (For full load stop use 4048704 (1-1/4" long) )
24 4040288 1 SPRING, governor, inner (50/6)25 4372098 1 SPRING, governor, outer (51/10)56 4040107 1 CAM, torque58 4047161 1 PLATE, stop (straight)
PUMP ASSEMBLY 4389467
USAGE: HD16DC tractor with 16000H engine effective engine serial No. 16-05335. HD16DPtractor with 16000H engine effective engine serial No. 16-05321 thru 16-09427
4275961
74
405546840552944040250
4056260
1
61
11
1
NOTE: Parts are identical to those shown on pages 36 thru 40 withthe following exceptions:PUMP ASSEMBLY, transfer (See page 33 for parts)PLUNGER ASSEMBLY(Includes barrel)LEVER ASSEMBLY, shut-off (Includes item 60)PIN Omit this itemSCREWGOVERNOR ASSEMBLYNOTE: Governor parts are identical to those - shown on pages 42 thru
46 with the following exceptions:9 4372137 2 SCREW (For full load stop use 4048704 (1-1/4" long) )
24 4040247 1 SPRING, governor, inner (50/2)25 4372097 1 SPRING, governor, outer (51/1)56 4040107 1 CAM, torque58 4047161 1 PLATE, stop (straight)
53
-
8/22/2019 Fuel Injection Pump #70645322
60/85
PUMP ASSEMBLY 4391819USAGE: HD16DP tractor with 16000H engine effective engine serial No. 16-09428.ITEM PART NO. QTY. DESCRIPTION
420
2759
40554684059012904369437225140590094040250
1
111
61
NOTE: Parts are identical to those shown on pages 36 thru 40with the following exceptions:PUMP ASSEMBLY, transfer (See page 33 for parts)HUB, pump driyingLOCKWASHER
NUTPLUNGER ASSEMBLY (Includes barrel)LEVER ASSEMBLY, shut-off (Includes item 60)
6 1 1 PIN1 SCREW Omit this item
74 4059702 1 GOVERNOR ASSEMBLYNOTE: Governor parts are identical to those shown on pages 42thru 46 with the following exceptions:
r 4059338 1 SCREW, stop, low idle (1" long)4059339 1 SCREW, stop, high idle (1-1/4" long)4059337 2 NUT, 5/16"NF
2 4 4040247 1 SPRING, governor, inner (50/2)25 4372097 1 SPRING, governor, outer (51/1)56 4040107 1 CAM, torque58 4043637 1 PLATE, stop (straight)
53A (Added January 1969)
-
8/22/2019 Fuel Injection Pump #70645322
61/85
-
8/22/2019 Fuel Injection Pump #70645322
62/85
55A 404001943721479069584372132
First type. Used onlywith LINK 4040473.(Not illustrated)
LINK, connectingSCREWLOCKWASHER, internal teeth, 1/4"NUT
1111
62 c 4054457 1 LEVER ASSEMBLY, fulcrum (Consists of 154, 55, 60 -, 63, 64 and 65) (Second type)
4040058 1 LEVER, fulcrum
PUMP ASSEMBLY 4379040USAGE: HD21A, F, G tractors with 21000 engine prior to engine serial No. 21-3792. Order
PUMP ASSEMBLY 4385805 when replacing complete pump.ITEM PART NO. QTY. DESCRIPTION
NOTE: Parts are identical to those shown on pages 37 thru 39 withthe following exceptions:4040222 1 COVER, transfer pump hole4050690 6 PLUNGER ASSEMBLY (Includes barrel)
1 COVER (Change part No. to 4048682)1 RACK (Change part No. to 4050510)
4040250 1 LEVER ASSEMBLY, shut-off (Includes item 60)1 PIN Omit this item1 SCREW
74 4051739 1 GOVERNOR ASSEMBLYNOTE: Governor parts are identical to those shown on pages 41thru 44 with the following exceptions:
24 4040247 1 SPRING, governor, inner (50/2)25 4372098 1 SPRING, governor, outer (51/10)
42746505961
3954 40504194040066
40430064372132
1 SPACER, (Omit this item)1 PIN, control rack1 WASHER, plain1 LOCKWASHER Used only with LINK 40530381 NUT,
4040473 1 LINK, control rack (Two-piece) (First type)55 (. 4053038 1 LINK, control rack (One-piece) (Second type)
56 4040107 1 CAM, torque58 4048227 1 PLATE, stop (7 decrease)
4040057 1 LEVER ASSEMBLY, fulcrum (Consists of 154, 55, 55A, 60, 63, 64 and 65) (First type)
LEVER 4040058, items
LEVER 4040058, items
54
-
8/22/2019 Fuel Injection Pump #70645322
63/85
PUMP ASSEMBLY 4385805USAGE: HD21A, F, G tractors with 21000 engine effective with engine serial No. 21-3792.ITEM PART NO. QTY. DESCRIPTION
NOTE: Parts are 'identical to those shown on pages 37 thru 39 withthe following exceptions:4 4040222 1 COVER, transfer pump hole
27 405069 0 6 PLUNGER ASSEMBLY (Includes barrel)59 4040250 1 LEVER ASSEMBLY, shut-off (Includes item 60)61 1 PIN
1 SCREW j Omit this item74 4054478 1 GOVERNOR ASSEMBLY
NOTE: Governor parts are identical to those shown on pages 41 thru.44 with the following exceptions:24 4040247 1 SPRING, governor, inner (50/2)25 4372098 1 SPRING, governor, outer (51/10)56 4040107 1 CAM, torque58 4048227 1 PLATE, stop (7 decrease)
55
-
8/22/2019 Fuel Injection Pump #70645322
64/85
PUMP ASSEMBLY 4387017USAGE: HD21A, G tractors with 21000H engine prior to engine serial No. 21- 05479. OrderPUMP ASSEMBLY 4389457 when replacing complete pump.ITEM PART NO. QTY. DESCRIPTION
NOTE: Parts are identical to those shown on pages 37 thru 39 withthe following exceptions:4 4 0 5 5 4 6 8 1 PUMP ASSEMBLY, transfer (See page 33 for parts)
27 4055294 6 PLUNGER ASSEMBLY (Includes barrel)59 4040250 1 LEVER ASSEMBLY, shut-off (Includes item 60)6 1 1
1PIN ) Omit this itemSCREW
74 4055405 1 GOVERNOR ASSEMBLYNOTE: Governor parts are identical to those shown on pages 41thru 44 with the following exceptions:
24 4372095 1 SPRING, governor, inner (50/3)25 4372098 1 SPRING, governor, outer (51/10)56 4040107 1 CAM, torque58 4048 227 1 PLATE, stop (7 decrease)
PUMP ASSEMBLY 4389457USAGE:
427596 1
74
HD21A, G tractors
4 0 5 5 4 6 8 14055294 64040250 1
11
4 0 5 6 2 5 9 1
with 21000H engine effective engine serial No. 21-05479NOTE: Parts are identical to those shown on pages 37 thru 39 withthe following exceptions:PUMP ASSEMBLY, transfer (See page 33 for parts)PLUNGER ASSEMBLY (Includes barrel)LEVER ASSEMBLY, shut-off (Includes item 60)PIN ) Omit this itemSCREWGOVERNOR ASSEMBLYNOTE: Governor parts are identical to those shown on pages 41 thru44 with the following exceptions:.
9 43 7213 7 2 SCREW (For full load stop use 4048704 (1-1/4") )24 4372095 1 SPRING, governor, inner (50/3)25 4372098 1 SPRING, governor, outer (51/10)56 4040107 1 CAM, torque58 4048 227 1 PLATE, stop (7 decrease)
56
-
8/22/2019 Fuel Injection Pump #70645322
65/85
PUMP ASSEMBLY 4387659USAGE: HD21P tractor with 21000H engine prior to engine serial No. 21-05469. Order PUMP
ASSEMBLY4389469 when replacing complete pump.ITEM PART NO. QTY. DESCRIPTION
NOTE: Parts are identical to those shown on pages 37 thru 39 withthe following exceptions:
4 4055468 1 PUMP ASSEMBLY, transfer (See page 33 for parts)27 4055294 6 PLUNGER ASSEMBLY(Includes barrel)59 4040250 1 LEVER ASSEMBLY shut-off (Includes item 60)61 1
1PIN ) Omit this itemSCREW
74 4055658 1 GOVERNOR ASSEMBLYNOTE: Governor parts are identical to those shown on pages 41 thru
44 with the following exceptions:24 4372095 1 SPRING, governor, inner (50/3)25 4372098 1 SPRING, governor, outer (51/10)56 4040107 1 CAM, torque58 4048227 1 PLATE, stop (7decrease)
PUMP ASSEMBLY 4389469USAGE: HD21P tractor with 21000H engine effective engine serial No. 21-05469
NOTE: Parts are identical to those shown on pages 37 thru 39 withthe following exceptions:
4 4055468 1 PUMP ASSEMBLY, transfer (See page 33 for parts)27 4055294 6 PLUNGER ASSEMBLY(Includes barrel)59 4040250 1 LEVER ASSEMBLY shut-off (Includes item 60)61 1
1PIN j Omit this itemSCREW
74 4056261 1 GOVERNOR ASSEMBLYNOTE: Governor parts are identical to those shown on pages 41 thru
44 with the following exceptions:
24 4040609 1 SPRING, governor, inner (50/15)25 4372098 1 SPRING, governor, outer (51/10)56 4040107 1 CAM torque58 4048227 1 PLATE, stop (7decrease)
57
-
8/22/2019 Fuel Injection Pump #70645322
66/85
PUMP ASSEMBLY 4390709USAGE: HD-21P crawler tractor with 21000 Mark II engineITEM PART NO. QTY. DESCRIPTION
42 0
405546840590129043694372251
1
111
NOTE: Parts are identical to those shown on pages 36 thru 40 withthe following exceptions:PUMP ASSEMBLY, transfer (See page 33 for parts)HUB, pump drivingLOCKWASHER
NUT27 4059009 6 PLUNGER ASSEMBLY (Includes barrel)59 4040250 1 LEVER ASSEMBLY, shut-off (Includes item 60)6 1 1 PIN Omit this item
1 SCREW74 4391129 1 GOVERNOR ASSEMBLY
NOTE: Governor parts are identical to those shown on pages 42thru 46 with the following exceptions:4372137 1 SCREW, stop, low idle (1" long)9 4048704 1 SCREW, stop, high idle (1-1/4" long)911040 2 NUT, 1/4"NF
24 4040609 1 SPRING, governor, inner (50/15)25 4372098 1 SPRING, governor, outer (51/10)56 4040107 1 CAM, torque5 8 . 4040292 1 PLATE, stop 7 decrease)
57A (Added April 1967)
-
8/22/2019 Fuel Injection Pump #70645322
67/85
-
8/22/2019 Fuel Injection Pump #70645322
68/85
USAGE:ITEM
260 Motor Scraper,PART NO. QTY.
PUMP ASSEMBLY 4385023260 Rear Dump Wagon with 15000 engine
DESCRIPTIONNOTE: Parts are identical to those shown on page 37 thru 39 with
the following exceptions:
4049755 1 PUMP ASSEMBLY, transfer (See page 33 for parts) (Used prior toJanuary 1964)4
4055468 1 PUMP ASSEMBLY, transfer (See page 33 for parts) (EffectiveJanuary 1964)27 4050690 6 PLUNGER ASSEMBLY (Includes barrel)59 4051922 1 LEVER ASSEMBLY, shut-off (Includes items 60 and 61)74 4055173 1 GOVERNOR ASSEMBLY
NOTE: Governor parts are identical to those shown on pages 41thru 44 with the following exceptions:
24 4040609 1 SPRING, governor, inner (50/15)25 4372097 1 SPRING, governor, outer (51/1)56 4040064 1 CAM, torque58 4040065 1 PLATE, stop (straight)
PUMP ASSEMBLY 4388077USAGE: 260P Motor Scraper, 260P Rear Dump Wagon with 15000 engine
NOTE: Parts are identical to those shown on pages 37 thru 39 withthe following exceptions:4049755 1 PUMP ASSEMBLY, transfer (See page 33 for parts) (Used prior to
January I 964)4
4055468 1 PUMP ASSEMBLY, transfer (See page 33 for parts)(EffectiveJanuary 1964)27 4050690 6 PLUNGER ASSEMBLY (Includes barrel)59 4051922 1 LEVER ASSEMBLY, shut-off (Includes items 60 and 61)74 4055897 1 GOVERNOR ASSEMBLY
NOTE: Governor Parts are identical to those shown on pages 41thru 44 with the following exceptions:24 4043730 1 SPRING, governor, inner (50/5)25 4372097 1 SPRING, governor, outer (51/1)56 4040064 1 CAM, torque58 4040065 1 PLATE, stop (straight)
58
-
8/22/2019 Fuel Injection Pump #70645322
69/85
PUMP ASSEMBLY 4379297USAGE: 260 Motor Scraper with 16000 engine. Order PUMP ASSEMBLY 4385807 when replacing
complete pump.ITEM PART NO. QTY. DESCRIPTION
NOTE: Parts are identical to those shown on pages 37 thru 39 withthe following exceptions:4 4049755 1 PUMP ASSEMBLY, transfer (See page 33 for parts)
27 405069 0 6 PLUNGER ASSEMBLY (Includes barrel)46 1 COVER (Change part No. to 4048682)50 1 RACK (Change part No. to 4050510)59 4 0 5 1 9 2 2 1 LEVER ASSEMBLY, shut-off (Includes items 60 and 61)74 405173 8 1 GOVERNOR ASSEMBLY
NOTE: Governor parts are identical to those shown on pages 41thru 44 with the following exceptions:24 4040609 1 SPRING, governor, inner (50/15)
4372098 1 SPRING, governor, outer (51/10)(Used on engines, without turbocharger)25 4048 710 1 SPRING, governor, outer (51-4) (Used on engines with turbocharger)i39 1 SPACER (Omit this item)54 4050419 1 PIN, control rack4040066 1 WASHER, plain4043006 1 LOCKWASHER Used only with LLNK 405303843 7213 2 1 NUT
4040473 1 LINK, control rack (Two-piece) (First type)554053038 1 LINK, control rack (Two-piece) (Second type)
55A 40400194 3 7 2 1 4 790 6 95843 7213 2
1111
LINK, connecting First type. Used onlySCREW with LINK 4040473.LOCKWASHER, internal teeth, 1/4" (Not illustrated)NUT4040107 1 CAM, torque (Used on engines without turbocharger)56 4040064 1 CAM, torque (Used on engines with turbocharger)4043 63 7 1 PLATE, stop (straight) (Used on engines without turbocharger)58 4047163 1 PLATE, stop (15 decrease) (Used on engines with turbocharger)4040057 1 LEVER ASSEMBLY, fulcrum (Consists of 1 LEVER 4040058, items54, 55, 55A, 60, 63, 64 and 65) (First type)
6 2 4054457 1 LEVER ASSEMBLY, fulcrum (Consists of 1 LEVER 4040058, items54, 55, 60, 63, 64 and 65) (Second type)
4040058 1 LEVER, fulcrum
59
-
8/22/2019 Fuel Injection Pump #70645322
70/85
PUMP ASSEMBLY 4385807USAGE: Service replacement for 260 Motor Scraper with 16000 engineITEM PART NO. QTY. DESCRIPTION
4 4049755 I
NOTE: Parts are identical to those shown on pages 37 thru 39 withthe following exceptions:
PUMP ASSEMBLY, transfer (See page 33 for parts)27 4050690 1 PLUNGER ASSEMBLY(Includes barrel)59 4051922 1 LEVER ASSEMBLY shut-off (Includes items 60 and 61)74 4054479 1 GOVERNOR. ASSEMBLY
NOTE: Governor parts are identical to those shown on pages 41thru 44 with the following exceptions:
24 4040609 1 SPRING, governor, inner (50/ 15)4372098 1 SPRING,: outer (51/10)(Used on engines withoutturbocharger)25 4048710 1 SPRING, governor, outer (51/4) (Used on engines with turbocharger)4040107 1 CAM, torque (Used on engines without turbocharger)
56 4040064 1 CAM, torque (Used on engines with turbocharger)4043637 PLATE, stop (straight) (Used on engines without turbocharger)58 {. 4047163 1 PLATE, stop (15decrease) on engines with turbocharger)
PUMP ASSEMBLY 4388083USAGE: 260 Motor Scraper, 260 Rear Dump Wagon with 19000 engine
NOTE: Parts are identical to those shown on pages 37 thru 39 withthe following exceptions:(049755 PUMP ASSEMBLY, transfer (See page 33 for parts) (Used prior to
engine #19-01151)4055468 1 PUMP ASSEMBLY, transfer (See page 33 for parts) (Effective with
engine #19-01151)27 4055294 6 PLUNGER ASSEMBLY(Includes barrel)59 4051922 1 LEVER ASSEMBLY, shut-off (Includes items 60 and 61)
(Continued)
60
-
8/22/2019 Fuel Injection Pump #70645322
71/85
ITEM PART NO, QTY.PUMP ASSEMBLY 4388083(Continued)
DESCRIPTION74 4055988 1 GOVERNOR ASSEMBLY
NOTE: Governor parts are identical to those shown on pages 41 thru44 with the following exceptions:
9 4372137 2 SCREW (For full load stop use 4048704 (1-1/4" long) )24 4043730 1 SPRING, governor, inner (50/5)25 4372097 1 SPRING, governor, outer (51/1)56 4040064 1 CAM, torque58 4 ,040065 1 PLATE, stop (straight)
PUMP ASSEMBLY 4388081USAGE: 260P Motor Scraper,
4049755 14
260P Rear Dump Wagon with 19000 engine.NOTE: Parts are identical to those shown on pages 37 thru 39 withthe following exceptions:PUMP ASSEMBLY, transfer (See page 33 for parts) (Used prior to
engine #19-01159)4055468 1 PUMP ASSEMBLY, transfer (See page 33 for parts) (Effective withengine #19-01159)
27 4055294 6 PLUNGER ASSEMBLY (Includes barrel)59 4051922 1 LEVER ASSEMBLY, shut-off (Includes items 60 and 61)74 4055987 1 GOVERNOR ASSEMBLY
NOTE: Governor parts are identical to those shown on pages 41thru 44 with the following exceptions:24 4043730 1 SPRING, governor, inner (50/5)25 4372097 1 SPRING, governor, outer (51/1)56 4040064 1 CAM, torque58 4040065 1 PLATE, stop (straight)
6 1
-
8/22/2019 Fuel Injection Pump #70645322
72/85
PUMP ASSEMBLY 4388421USAGE: 260E Motor Scraper with 19000 engine.ITEM PART NO. QTY. DESCRIPTION
427
40554684055294
1
6
NOTE: Parts are identical to those shown on pages 36 thru 40with the following exceptions:PUMP ASSEMBLY, transfer (See page 33 for parts)PLUNGER ASSEMBLY (Includes barrel)
59 4051922 1 LEVER ASSEMBLY, shut-off (Includes items 60 and 61)74 4058941 1 GOVERNOR ASSEMBLY
NOTE: Governor parts are identical to those shown on pages42 thru 46 with the following exceptions:24 4372095 1 SPRING, governor, inner (50/3)25 4372097 1 SPRING, governor, outer (51/1)56 4040064 1 CAM, torque58 4040065 1 PLATE, stop (straight)
61A (Added January 1966)
-
8/22/2019 Fuel Injection Pump #70645322
73/85
PUMP ASSEMBLY 4390424USAGE: 260E tractor scraper with 19000 Mark II engne prior to engne seria No. 19-01941ITEM PART NO. QTY. DESCRIPTION
420
405546840590129043694372251
1111
NOTE: Parts are identica to those shown on pages 36 thru 40 withthe following exceptions:PUMP ASSEMBLY, transfer (See page 33 for parts)HUB, pump drivingLOCKWASHERNUT
27 4055294 6 PLUNGER ASSEMBLY (Includes barre)59 4051922 1 LEVER ASSEMBLY, shut-off (Includes items 60 and 61)74 4058941 1 GOVERNOR ASSEMBLY
NOTE: Governor parts are identica to those shown on pages 42thru 46 with the following exceptions:24 4372095 1 SPRING, governor, inner (50/3)25 4372097 1 SPRING, governor, outer (51/1)56 4040064 1 CAM, torque58 4040065 1 PLATE, stop (straght)
PUMP ASSEMBLY 4390805USAGE: 260E tractor scraper with 19000 Mark II engne effective engne seria No. 19-01941ITEM PART NO. QTY. DESCRIPTION
420
405546840590129043694372251
1111
NOTE: Parts are identica to those shown on pages 36 thru 40 withthe following exceptions:PUMP ASSEMBLY, transfer (See page 33 for parts)HUB, pump drivingLOCKWASHERNUT
27 4059009 6 PLUNGER ASSEMBLY (Includes barre)59 4051922 1 LEVER ASSEMBLY, shut-off (Includes items 60 and 61)74 4059324 1 GOVERNOR ASSEMBLY
NOTE: Governor parts are identica to those shown on pages 42thru 46 with the following exceptions:24 4372095 1 SPRING, governor, inner (50/3)25 4372097 1 SPRING, governor, outer (51/1)56 4040064 1 CAM, torque58 4049245 1 PLATE, stop (straght)
61B (Added April 1967)
-
8/22/2019 Fuel Injection Pump #70645322
74/85
PUMP ASSEMBLY 4390423USAGE: 260 tractor scraper with 19000 Mark II engine prior to engine serial No. 19-01940ITEM PART NO. QTY. DESCRIPTION
420
275974
405546840590129043694372251405529440519224055987
1
111
61
1
NOTE: Parts are identical to those shown on pages 36 thru 40 withthe following exceptions:PUMP ASSEMBLY, transfer (See page 33 for parts)HUB, pump drivingLOCKWASHER
NUTPLUNGER ASSEMBLY (Includes barrel)LEVER ASSEMBLY, shut-off (Includes items 60 and 61)GOVERNOR ASSEMBLYNOTE: Governor parts are identical to those shown on pages 42thru 46 with the following exceptions:
4372137 1 SCREW, stop, low idle (1" long)9 (048704 1 SCREW, stop, high idle (1-1/4" long)
911040 2 NUT, 1/4"NF24 4043730 1 SPRING, governor, inner (50/5)25 4372097 1 SPRING, governor, outer (51/1)56 4040064 1 CAM, torque58 4040065 1 PLATE, stop (straight)
61C (Added April 1967)
-
8/22/2019 Fuel Injection Pump #70645322
75/85
PUMP ASSEMBLY 4390800USAGE: 260 tractor scraper with 19000 Mark II engine effective engine serial No. 19-01940ITEM PART NO. QTY. DESCRIPTION
420
275974
405546840590129043694372251405900940519224059323
1
111
61
1
NOTE: Parts are identical to those shown on pages 36 thru 40with the following exceptions:PUMP ASSEMBLY, transfer (See page 33 for parts)HUB, pump drivingLOCKWASHER
NUTPLUNGER ASSEMBLY (Includes barrel)LEVER ASSEMBLY, shut-off (Includes items 60 and 61)GOVERNOR ASSEMBLYNOTE: Governor parts are identical to those shown on pages 42thru 46 with the following exceptions:
4372137 1 SCREW, stop, low idle (1" long)9(
4048704 1 SCREW, stop, high idle (1-1/4" long)911040 2 NUT, 1/4"NF
24 4043730 1 SPRING, governor, inner (50/5)25 4372097 1 SPRING, governor, outer (51/1)56 4040064 1 CAM, torque58 4049245 1 PLATE, stop (straight)
61D (Added April 1967)
-
8/22/2019 Fuel Injection Pump #70645322
76/85
PUMP ASSEMBLY 4391272USAGE:ITEM
420
260 series A tractorPART NO, QTY.
4055468 14059012 1904369 14372251 1
scraper with 21000 Mark II engineDESCRIPTIONNOTE: ,Parts are identical to those shown on pages 36 thru 40with the following exceptions:PUMP ASSEMBLY, transfer (See page 33 for parts)HUB, pump drivingLOCKWASHERNUT
27 4059009 6 PLUNGER ASSEMBLY