francesco lanza di scalea - university of california, san...

1

Francesco Lanza di Scalea

Professor Director, NDE & Structural Health Monitoring Laboratory

Department of Structural Engineering

University of California, San Diego 9500 Gilman Drive, M.C. 0085

La Jolla, CA 92093-0085, U.S.A.

Tel: 858-8221458; Fax: 858-5346373; E-mail: [email protected]

UCSD Research Website : http://ndeshm-lab.ucsd.edu/

UCSD School of Engineering Faculty Profile: http://jacobsschool.ucsd.edu/faculty/faculty_bios/index.sfe?fmp_recid=62

Other Affiliations

California Institute for Telecommunications and Information Technology (Calit2), University of California San Diego (http://www.calit2.net/)

Los Alamos National Laboratory Engineering Institute (https://www.lanl.gov/projects/national-security-education-center/engineering/)

2

Index

Section Page no.

Education ...................................................................................................................................3

Research and Teaching Interests ...............................................................................................3

Professional History ....................................................................................................................3

Professional Certifications ..........................................................................................................3

University Service .......................................................................................................................3

Professional Committee/Panels .................................................................................................4

Professional Society Memberships (current) .............................................................................5

Honors and Awards ...................................................................................................................5

Editorial Activities ......................................................................................................................6

Research Program Reviews .......................................................................................................6

Conference Committees .............................................................................................................7

Visiting Professorships .............................................................................................................10

Invited Seminars and Presentations .........................................................................................10

Funded Research Grants ........................................................................................................12

Courses Taught at UCSD .........................................................................................................15

Supervision of Student Research .............................................................................................16

Publications:

Book Chapters .............................................................................................................20

Journal Articles .............................................................................................................20

Research Technical Reports ........................................................................................26

Refereed Conference Proceedings ..............................................................................27

Other Conference Proceedings ....................................................................................30

Patents ..........................................................................................................................44

Personal ...................................................................................................................................44

3

Education Post-doctoral Fellow, Center for Non-destructive Evaluation, Materials Science and Engineering,

The Johns Hopkins University, Baltimore, 1998-1999 (advisors: R.E. Green, Jr., B. Djordjevic) Ph.D., Mechanical Engineering, University of Palermo, Italy, 1997 (advisor: A. Ajovalasit) M.S., Engineering Mechanics, Michigan State University, 1996 (advisor: G. Cloud) Laurea, Mechanical Engineering, 110/110 summa cum laude, University of Palermo, Italy, 1993 (advisor: A. Ajovalasit) Research and Teaching Interests Non-Destructive Evaluation (NDE); Structural Health Monitoring (SHM); Experimental Mechanics; Material Characterization and Structural Testing; Linear and Nonlinear Wave Propagation; Ultrasonic Testing and Ultrasonic Imaging; Acoustic Emission Testing; Infrared Thermography; Laser Metrology; Strain Measurements; Digital Signal Processing; Data Analysis. Recent applications to railroad tracks, prestressed concrete bridges, composite aerospace structures, wind turbines blades, biological materials Professional History Full Professor, Department of Structural Engineering, University of California, San Diego (2007-) Director, NDE & Structural Health Monitoring Laboratory, University of California, San Diego

(2000-) Associate Professor, Department of Structural Engineering, University of California, San Diego

(2003-2007) Assistant Professor, Department of Structural Engineering, University of California, San Diego

(1999-2003) Post-doctoral Fellow, Center for Non-destructive Evaluation, Materials Science and Engineering

Department, The Johns Hopkins University (1998-1999) Research Assistant, Michigan State University, (1997 and 1995) Research Assistant, University of Palermo, Italy (1996 and 1993-1994) Professional Certifications Professional Engineer, Italy (since 1993) University Service UCSD University-wide

Member, UCSD Academic Senate Graduate Council Committee (2017-present) Member, UCSD Next-Generation Network Advisory Committee (2012-2016) Member, Engineering Dean’s Search Committee (2013 and 2002) Faculty Panelist, UCSD’s Frontiers of Innovation Scholars Program (FISP) to advice VC for Research on funding research to address the society’s greatest challenges (2014/15) Faculty At-large Representative, UCSD Next Generation Network Advisory Committee (2012/13 and 2013/14) Member, Hellman Faculty Fellows Selection Committee (2006)

UCSD School of Engineering Member, UCSD School of Engineering Strategic Planning Workgroup – Research (2012/13) UCSD Reference, Academic Cooperation Agreement between the School of Engineering of UCSD and the School of Engineering of the University of Palermo (2006-2011 renewed 2011-2016) Member, School of Engineering Strategic Planning Workgroup – Research (2012/13) UCSD Reference, Academic Cooperation Agreement between the School of Engineering of UCSD and the School of Engineering of the University of Trento (2007-2012)

4

Member, Master of Engineering (MEng) Degree Committee (2005/06 and 2006/07) Member, Aerospace Engineering Program Committee (2001/02) Member, Ethos Committee (2000/01)

UCSD Department of Structural Engineering Chair, Committee on Teaching (2015-present, Member 2012-15) Member, Excellence Faculty Search Committee (2016/17) Member, Graduate Affairs Committee (2007-present) Member, UCSD Structural Engineering Dept. External Relations Committee (2015-present) Member, Powell Laboratories Advisory Committee (2012-present) Chair, Faculty Search Committee on Structural Health Monitoring and Prognosis (2014/15) Member, Faculty Search Committee on Geotechnical Engineering and Structural Health Monitoring (2014) Member, ABET Subcommittee for Mechanics and Materials (2012 - 2015) Chair, Graduate Affairs Committee (2004/05 to 2006/07) Chair, Renewal Engineering Undergraduate Focus Area Committee (2013/14) Member, Geotechnical Engineering and Structural Health Monitoring Faculty Search Committee (2014) Member, ABET Subcommittee for Mechanics and Materials (2012/13) Member, Powell Laboratories Advisory Committee (2012/13) Member, Undergraduate Teaching Evaluation Committee (2012/13) Member, Aerospace Safety Faculty Search Committee (2011/12) Member, Department Space Committee (2011/12) Chair, Composites Faculty Search Committee (2008) Member, Composites Faculty Search Committee (2007/08) Member, Protective Systems Faculty Search Committee (2004/05 and 2005/06) Member, Low-cost/Light-weight/Large-scale Structural Systems Faculty Search Committee (2004/05) Member, Undergraduate Laboratories Committee (2002/03 to 2004/05) Member, Space Committee (2003/04) Member, Aerospace Program Committee (2000/01 to 2003/04) Member, Graduate Affairs Committee (2001/02 to 2003/04) Member, Marine/Ocean Engineering Faculty Search Committee (2003/04) Member, Ad Hoc Staff Review Committee (2002) Member, Structural Health Monitoring Faculty Search Committee (2002) Member, MSO Search Committee (2000/01) Member, SE Faculty Ad Hoc Review Committee (2000-present)

Professional Committees/Panels Member, Expert Panel on Non-Destructive Evaluation Technologies for CFRP Automotive

Components and Structures for the Institute for Advanced Composites Manufacturing Innovation of the American Chemistry Council (IACMI/ACC Institute) (2017-present).

Member, Expert Evaluation Panel on "Future and Emerging Technologies -FET," Horizon 2020 - the EU Framework Program for Research and Innovation, European Research Council (2016-present).

Member, Railway Maintenance Committee (AR060) of the US National Transportation Research Board (2005-present).

Member, Technical Advisory Committee of the National University Rail (NURail) Center, led by University of Illinois Urbana-Champaign (2013-present).

Member, International Scientific Committee, Centro Studi e Ricerche per l’Identificazione dei Materiali e delle Strutture “Michele Capurso,” Alma Mater Studiorum, University of Bologna, Italy (2004-present).

5

International Expert, evaluation of research program in “Multiscale dynamics theories for characterizing slight damage in structures,” Department of Engineering Mechanics, Hohai University, China (2014).

Member, Expert Panel on Rail Safety Technologies for US Government Accountability Office (GAO) for presentation to US Congressional Committee on Rail Transportation (2010).

International Expert, evaluation of research program in “Multiscale Dynamics Theories for Characterizing Slight Damage in Structures,” Department of Engineering Mechanics, Hohai University, China (2014).

Member, International Scientific Board on Research on Advanced Materials (Ricerca Scientifica e Tecnologica sui Materiali Avanzati), CARIPLO FOUNDATION, Milan, Italy (2008-2011)

Member, International Jury for “Bridges to Italy: Cervelli in Movimento,” Italy-USA Bridges to Italy International Business Association (2011-present)

UCSD Reference, Academic Cooperation Agreement between the School of Engineering of the University of California San Diego and the School of Engineering of the University of Palermo, Italy (2006-2011, renewed 2011-2016)

UCSD Reference, Academic Cooperation Agreement between the School of Engineering of the University of California San Diego and the School of Engineering of the University of Trento, Italy (2007-2012)

Professional Society Memberships (current) Acoustical Society of America (ASA) Society for Experimental Mechanics (SEM) Fulbright Alumni Association American Society for Nondestructive Testing (ASNT) Institute of Electrical and Electronics Engineering (IEEE) Railway Maintenance Committee (AR060) of the Transportation Research Board of the US

National Academies (renewed 2010-2015) “Albo degli Ingegneri” (Society of Professional Engineers, Italy)

Honors and Awards Fellow of the Society for Experimental Mechanics (SEM) for "contributions to the fields of non-

destructive evaluation and structural health monitoring, particularly ultrasonic testing, acoustic emission testing and infrared thermography for quantitative damage detection" (2018).

Fellow of the Acoustical Society of America (ASA) "for contributions to the theory and applications of ultrasonic guided waves" (2016).

Fellow of American Society of Nondestructive Testing (ASNT) (2016). Best Paper Award, "Passive-only Defect Detection and Imaging in Composites Using Diffuse

Fields" (with J. Tippmann), SEM Composites & Multifunctional Materials Technical Division, Annual Conference of the Society for Experimental Mechanics, Costa Mesa, CA (2015).

Best Paper Award, for paper “Non-contact Ultrasonic Guided Wave Inspection of Rails,” 9th International Workshop on Structural Health Monitoring, Stanford University (2013).

Best Teacher Award, Department of Structural Engineering, UCSD – voted by graduating seniors (2010/11).

Plenary Speaker, Italian National Congress on Experimental Mechanics, Palermo, Italy (2010). San Diego Regional Renewable Energy Technology Acceleration Program Award – through

UCSD Von Liebig Center - “Structural Health Monitoring of Turbine Blades Using Advanced Infrared Thermography,” 2011 (with A. Manohar).

American Society for Nondestructive Testing Fellowship Research Award – “Stress Prediction Through Nonlinear Ultrasonics in Waveguides,” 2010.

Expert Panelist on Rail Safety Technologies, US Government Accountability Office – Physical Infrastructure for US Congressional Committee on Rail Transportation, 2010.

6

Structural Health Monitoring “Person of the Year Award” for “Outstanding Contributions to Structural Health Monitoring,” Editorial Board of International Journal of Structural Health Monitoring, 2007.

American Society for Nondestructive Testing Fellowship Research Award – “Built-in System for the Structural Health Monitoring of Adhesively-bonded Components in Aerospace Structures,” 2006.

American Society for Nondestructive Testing Fellowship Research Award – “Load Measurement and Health Monitoring in Cable Stays via Guided Wave Magnetostrictive Ultrasonics,” 2002.

American Society for Nondestructive Testing Faculty Grant Award – “Development of Undergraduate Course SE163: Nondestructive Evaluation,” 2003 (with V. Karbhari).

O-1 U.S. Immigration Status for “extraordinary ability in science” (1999-2006). Hellman Faculty Fellowship, University of California San Diego, 2000/01 and 2002/03. Second place award, International Student Paper Presentation Competition of the Society for

Experimental Mechanics Spring Conference, 1997. Italian Department of New Technology, Energy and Environment (ENEA) award for academic

excellence, Rome, Italy, 1996. Fulbright Scholarship, U.S. Institute of International Education,1995-1996. COMETT European Union award for research experience in a foreign country, 1994. "Giuseppe Manzella" Italian National Foundation award for best academic thesis in experimental

solid mechanics, 1993. Editorial Activities Associate Editor, ASME Journal of Nondestructive Evaluation, Diagnostics and Prognostics of

Engineering Systems, 2017-present. Editor, Experimental Mechanics, Society for Experimental Mechanics, 2014-present. Associate Editor, International Journal of Structural Health Monitoring, 2008-present Associate Editor, Research in Nondestructive Evaluation, American Society for Nondestructive

Testing, 2001-present Associate Editor, Journal of Intelligent Materials Systems and Structures, 2007-present Associate Editor, International Journal of Structural Longevity, 2009-2010 Guest Editor (with T. Kundu of Univ of Arizona and H. Sohn of KAIST Korea) of Special Issue on

“Structural Health Monitoring: Use of Guided Waves and/or Nonlinear Acoustic Techniques” for the Journal of Optical Engineering, 2015.

Reviewer: Journal of the Acoustical Society of America, Journal of Intelligent Material Systems and Structures, Journal of Sound and Vibration, International Journal of Solids and Structures, Research in Nondestructive Evaluation, Experimental Mechanics, ASCE Journal of Structural Engineering, ASCE Journal of Materials in Civil Engineering, ASCE Journal of Aerospace Engineering, Journal of Composite Materials, Experimental Mechanics, International Journal of Structural Health Monitoring

Research Program Reviews Expert evaluator, European Community Research Projects, Transport and Energy Area, “Future

and Emerging Technologies – FET Horizon 2020,” 2015 Online Expert Reviewer, National Science Foundation’s “Catalyzing New International

Collaborations” (CNIC) Program, under the International Science and Engineering Section of NSF’s Office of International and Integrative Activities Support, NSF 13-605, July 2014.

Research Proposal reviewer for US National Science Foundation: Small Business Innovation Research/Small Business Technology Transfer (SBIR/STTR) Program.

Research Proposal reviewer for US Army Research Laboratory (ARL) Director’s Research Initiative, US Army Research Office (ARO).

Research Proposal reviewer for US Air Force Office of Scientific Research, Dynamic Data Driven Applications Systems (DDDAS) Program.

7

Research Proposal reviewer for CARIPLO FOUNDATION, Milan, Italy, Advanced Materials Program

Research proposal reviewer for Competitive Support for Unrated Researchers (CSUR), National Research Foundation, South Africa

Research Proposal reviewer for US Air Force Office of Scientific Research, Structural Mechanics Program

Research Proposal reviewer for US National Science Foundation: Structural Health Monitoring Program

Research Proposal reviewer for US National Science Foundation: Energy, Power and Adaptive Systems Division.

Research Proposal reviewer for US National Science Foundation: International Science and Engineering Section of Office of International and Integrative Activities Support.

Research Proposal reviewer for US National Science Foundation: Civil, Mechanical and Manufacturing Innovation Division

Research Proposal reviewer for US National Science Foundation: Sensors and Sensing Systems Program

Research Proposal reviewer for US National Institute of Health, Ultrasound Imaging Program (SBIR).

Research Proposal reviewer for US Department of State, Science and Technology Center Programs, ex-Soviet Union Nuclear Weapons Antiproliferation Initiative.

Conference Committees Chair (with Alexander Samsonov), Mini-symposium "Waves in Solids," International Conference

of Eurodyn, La Sapienza University, Rome, Sept 10-13, 2017. Presiding Officer (with Dr. Tedd Sussman), Special Session on "New Technologies for Track

Condition Assessment and Management," 95th Annual Meeting of the Transportation Research Board Annual Conference, Washington DC, Jan 10-14, 2016.

Member, International Advisory Board, 5th International Conference on Smart and Multifunctional Materials, Devices and Structures (CIMTEC 2016), Symposium P, Embodying Intelligence in Structures and Integrated Systems, Perugia, Italy June 5-10, 2016.

Chair, session on "Recent Advances in Ultrasonic and Acoustic Emission Techniques for SHM/NDE III" International Workshop on Structural Health Monitoring, Stanford University, Sept 1-3, 2015.

Chair, Session on Smart Materials and Sensors, Symposium 5 –Structural Health Monitoring, 2015 ASME SMASIS Conference (Smart Materials, Adaptive Structures and Intelligent Systems), Colorado Springs, CO, September 21 -23, 2015.

Chair, Session T01.RS01 –“Acoustic Imaging and Acoustic Detection”, 22nd International Congress on Sound and Vibration (ICSV22), Florence, Italy, July 12-16, 2015.

Chair of following technical sessions: “Noncontact Guided Wave Techniques,” “Distributed Sensors,” and “Advanced Ultrasonic Methods for SHM II,” Conference on Health Monitoring of Structural and Biological Systems IX, part of SPIE Smart Structures/NDE Symposium, San Diego, CA, 8-12 March 2015.

Program committee member, Conference on Health Monitoring of Structural and Biological Systems IX, part of SPIE Smart Structures/NDE Symposium, San Diego, CA, 8-12 March 2015.

Program committee member, Conference on Sensors and Smart Structures Technologies for Civil, Mechanical and Aerospace Systems, part of SPIE Smart Structures/NDE Symposium, San Diego, CA, 8-12 March 2015.

Program Committee Member, Conference on Health Monitoring of Structural and Biological Systems VIII, SPIE’s Smart Structures/NDE Conference, San Diego, CA, March 2014.

Program Committee Member, Conference on Sensors and Smart Structures Technologies for Civil, Mechanical, and Aerospace Systems, SPIE’s Smart Structures/NDE Conference, San Diego, CA, March 2014.

8

Chair, session on “Guided Waves for SHM in Aerospace Applications II,” Conference on Health Monitoring of Structural and Biological Systems VIII, SPIE’s Smart Structures/NDE Conference, San Diego, CA, March 2014.

Scientific and Organizing Committee Member, 9th Intl Workshop on Structural Health Monitoring, Stanford University, September 2013.

Chair of following Technical Sessions: “Guided waves for SHM of Composites II,” “Guided waves for SHM: Nonlinear Ultrasonics,” and “SHM for Railway Track, Energy Harvesting and Other Issues,” Conference on Health Monitoring of Structural and Biological Systems VIII, SPIE’s Smart Structures/NDE Conference, San Diego, CA, March 2013.

Chair, session on “Damage localization using NDE methods,” Conference on Sensors and Smart Structures Technologies for Civil, Mechanical, and Aerospace Systems, SPIE’s Smart Structures/NDE Conference, San Diego, CA, March 2013.

Program Committee Member, Conference on Sensors and Smart Structures Technologies for Civil, Mechanical, and Aerospace Systems, SPIE’s Smart Structures/NDE Conference, San Diego, CA, March 2013.

Program Committee Member, Conference on Health Monitoring of Structural and Biological Systems VII, SPIE’s Smart Structures/NDE Conference, San Diego, CA, March 2013

Scientific Advisory Committee Member, International Workshop “Toward Intelligent Civil Infrastructure”, organized as European Community- funded project MEMSCON (Micro-Electro-Mechanical Systems in a Wireless, Remote and Intelligent Monitoring and Assessment System for the Maintenance of Constructed Facilities), Athens, Greece, March 2012.

Chair of following Technical Sessions: “Guided Waves II: Monitoring Pipes and Other Structures,” and “Guided Waves III: Modeling and Analysis, and Sensing Technologies for Wind Turbines,” SPIE’s Smart Structures/NDE Conference, San Diego, CA, March 2012.

Program Committee Member, Conference on Sensors and Smart Structures Technologies for Civil, Mechanical, and Aerospace Systems, SPIE’s Smart Structures/NDE Conference, San Diego, March 2012.

Program Committee Member, Conference on Health Monitoring of Structural and Biological Systems VI, SPIE’s Smart Structures/NDE Conference, San Diego, CA, March 2012.

Scientific Advisory Committee Member, International Workshop “Toward Intelligent Civil Infrastructure,” European Community Funded Project MEMSCON (Micro-Electro-Mechanical Systems in a Wireless, Remote and Intelligent Monitoring and Assessment System for the Maintenance of Constructed Facilities), Athens, Greece, March 2012.

International Advisory Board Member, Symposium G – “Embodying Intelligence in Structures and Integrated Systems,” 4th International Conference on Smart Materials, Structures and Systems (CIMTEC 2012), Montecatini Terme, Italy, June 2012.

International Steering Committee Member, 1st International Workshop on High-speed and Intercity Railways (IWHIR 2011), The Hong Kong Polytechnic University, July 2011.

Program Committee Member, Conference on Health Monitoring of Structural and Biological Systems V, part of part of SPIE (The International Society for Optical Engineering) Annual International Symposium on Smart Structures & NDE, San Diego, CA, March 2011.

Chair, Guided Waves Sessions (“Guided Waves in Composites,” “Guided Waves for Large Structure Monitoring,” “Guided Waves with Distributed Sensors – 1,” and “Guided Waves for Impact Monitoring”), Conference on Health Monitoring of Structural and Biological Systems V, part of part of SPIE (The International Society for Optical Engineering) Annual International Symposium on Smart Structures & NDE, San Diego, CA, March 2011.

Program Committee Member and Session Chair (“Ultrasonic Methods”), Conference on Sensors and Smart Structures Technologies for Civil, Mechanical and Aerospace Systems, part of part of SPIE (The International Society for Optical Engineering) Annual International Symposium on Smart Structures & NDE, San Diego, CA, March 2011.

Program Committee Member and Session Chair (“Guided Waves III, IV and VI”), Conference on Health Monitoring and Biological Systems VIII, part of SPIE (The International Society for Optical

9

Engineering) Annual International Symposium on Smart Structures & NDE, San Diego, CA, March 2010.

Program Committee Member, Conference on Sensors and Smart Structures Technologies for Civil, Mechanical and Aerospace Structures, part of SPIE (The International Society for Optical Engineering) Annual International Symposium on Smart Structures & NDE, San Diego, CA, March 2010.

International Organizing Committee Member, 7th International Workshop on Structural Health Monitoring, Stanford University, September 2009.

Session Chair, “Nonlinear Ultrasonics for Structural Health Monitoring,” 7th International Workshop on Structural Health Monitoring, Stanford University, September 2009.

Program Committee Member and Sessions Chair (“Guided Waves for Structural Health Monitoring I: Metal Waveguides and Temperature Effects,” “Guided Waves for Structural Health Monitoring II: Fatigue Damage and Crack Detection,” and “Guided Waves for Structural Health Monitoring III: New Concepts and Applications”), Conference on Health Monitoring and Smart NDE of Structural and Biological Systems VII, part of SPIE (The International Society for Optical Engineering) Annual International Symposium on Smart Structures and Materials & NDE and Health Monitoring, San Diego, CA, March 2009.

Program Committee Member and Session Chair (“Modeling and Mechanics II”), Conference on Sensors and Smart Structures Technologies for Civil, Mechanical and Aerospace Systems, part of SPIE (The International Society for Optical Engineering) Annual International Symposium on Smart Structures/NDE, San Diego, CA, March 2009.

Technical Advisory Committee Member, NDE/NDT for Highways and Bridges: Structural Materials Technology (SMT), Oakland, CA, September 2008.

Program Committee Member, Conference on Sensors and Smart Structures Technologies for Civil, Mechanical and Aerospace Structures, part of SPIE (The International Society for Optical Engineering) Annual International Symposium on Smart Structures and NDE, San Diego, CA, March 2008.

Program Committee Member and Session Chair (“Guided Waves for Structural Health Monitoring I and II”), Conference on Health Monitoring and Smart NDE of Structural and Biological Systems VI, part of SPIE (The International Society for Optical Engineering) Annual International Symposium on Smart Structures and NDE, San Diego, CA, March 2008.

Session Chair, “Emerging Sensing Technologies for SHM: I and II,” 6th International Workshop on Structural Health Monitoring, Stanford University, September 2007.

Program Committee Member and Session Chair (“Guided Waves for Structural Health Monitoring I, II and III”), Conference on Health Monitoring and Smart NDE of Structural and Biological Systems VI, part of SPIE (The International Society for Optical Engineering) Annual International Symposium on Smart Structures and Materials & NDE and Health Monitoring, San Diego, CA, March 2007.

Program Committee Member, Conference on Sensors and Smart Structures Technologies for Civil, Mechanical, and Aerospace Systems, part of SPIE (The International Society for Optical Engineering) Annual International Symposium on Smart Structures and Materials & NDE and Health Monitoring, San Diego, CA, March 2007.

Technical Advisory Committee Member, NDE/NDT for Highways and Bridges: Structural Materials Technology (SMT), St. Louis. MO, 14-18 August 2006.

Program Committee Member, Conference on Nondestructive Evaluation and Health Monitoring of Aerospace Materials, Composites and Civil Infrastructures IV, 10th SPIE International Symposium on Nondestructive Evaluation for Health Monitoring and Diagnostics, San Diego, CA, February/March 2006

Program Committee Member, SPIE Smart Structures and NDE Joint Conference: Sensors and Smart Structures Technologies for Civil, Mechanical and Aerospace Systems, San Diego, CA, February/March 2006

10

Session Chair, “Guided Waves for Structural Health Monitoring”, Conference on Health Monitoring and Smart NDE of Structural and Biological Systems, part of SPIE (The International Society for Optical Engineering) Annual International Symposia on NDE for Health Monitoring and Diagnostics, San Diego, CA, March 2004, 2005 and 2006

Program Committee Member, Conference on Health Monitoring and Smart NDE of Structural and Biological Systems, part of SPIE (The International Society for Optical Engineering) Annual International Symposia on NDE for Health Monitoring and Diagnostics, San Diego, CA, March 2004, 2005 and 2006

Program Committee Member, Conference on NDE and Health Monitoring of Aerospace Materials and Composites, part of SPIE (The International Society for Optical Engineering) Annual International Symposia on NDE for Health Monitoring and Diagnostics, San Diego, CA, March 2002, 2003, 2004 and 2005

Organizing Committee Member, 11th International Symposium on Nondestructive Characterization of Materials, Berlin, Germany, June 2002

Chair, sessions I and II on Advanced NDE and Smart Structures, Society for the Advancement of Material and Process Engineering (SAMPE) 45th International Symposium and Exhibition, Long Beach, CA, May 2000

Visiting Professorships Visiting Professor, Master in Evaluation Control and Reduction of Environmental Seismic Risk –

Advance Course on Structural Health Monitoring, University of Rome “La Sapienza”, Rome, July 2012.

Visiting Professor, Department of Mechanical Engineering, University of Palermo, Palermo, Italy (2008).

Invited Seminars and Presentations “Topics in condition monitoring of solids and structures using elastic waves,” seminar series of

the Center for Sustainable Engineering of Geological and Infrastructure Materials (SEGIM), Northwestern University, Evanston, IL, December 2017.

“Research topics in structural health monitoring based on elastic wave propagation,” aerospace graduate seminar series of Department of Aerospace Engineering, University of Michigan, February 2017.

“Detection of major impact damage to composite aerospace structures by ultrasonic guided waves and statistical signal processing”, invited presentation at the San Diego Section of the American Society for Nondestructive Testing, September 6, 2016.

“Advances in ultrasonic defect detection and imaging in structures,” invited lecture at CIMTEC 2016 conference – 5th International Conference on Smart and Multifunctional Materials Structures & Systems, Session P-2 - Integration Technologies of Symposium P "Embodying Intelligence in Structures and Integrated Systems", Perugia, Italy, June 2016.

“Air-coupled ultrasonic testing of rails,” invited presentation to special session on NDE for Railroad Applications, 25th American Society for Nondestructive Testing Annual Research Symposium, New Orleans, LA, April 2016.

“Nonlinear ultrasonic waves for structural monitoring: thermal stress measurement and guided wave management”, invited presentation to special session 3aSA, Nonlinear Techniques for Nondestructive Evaluation, Acoustical Society of America Annual Meeting, Jacksonville, Florida, November 2015.

“Some efforts to improve structural defect imaging using ultrasonic testing”, invited presentation to Symposium 5 – Structural Health Monitoring, 2015 ASME SMASIS Conference (Smart Materials, Adaptive Structures and Intelligent Systems), Colorado Springs, CO, September 2015.

“Non-Destructive Evaluation Methods for Detecting Major Damage in Internal Composite Structural Components,” Federal Aviation Administration, 12th Annual technical Review Meeting

11

of the Joint Advanced Materials and Structures (JAMS) Center of Excellence, Grapevine, TX, March 2016

“NDT and SHM issues in railroad tracks,” invited presentation at the San Diego Section of the American Society for Nondestructive Testing, February 2014.

”Use of Guided Waves for the Health Monitoring of Rails,” invited presentation at Special Session on Advances and Challenges in SHM of Civil and Aerospace Structures, 4th International Conference on Smart Materials Structures and Systems (CIMTEC), Montecatini Terme, Italy, June 2012.

“Modeling of nonlinear guided waves and applications to structural health monitoring” invited presentation at Special Session on Ultrasonic Guided Waves for Nondestructive Evaluation and Structural Health Monitoring, organized by Prof. Kundu at the 164th Meeting of the Acoustical Society of America, Kansas City, Missouri, 22-26, October 2012.

“Measurement of Rail Neutral Temperature by Ultrasonic Guided Waves,” invited presentation at the Third Research Review of the Federal Railroad Administration for the Transportation Research Board, Washington, DC, May 2012.

“Ultrasonic Inspection Of Composite Structures: From NDE To Continuous Structural Health Monitoring,” invited presentation at the Meeting of the San Diego Section of the American Society for Nondestructive Testing, San Diego, CA, October 2011.

“Ultrasonic Guided Waves and Applications to Structural Health Monitoring,” Plenary Lecture, Italian National Congress on Experimental Mechanics (AIAS), Palermo, Italy, September 2011.

“Nonlinear Higher-harmonic Generation of Ultrasonic Guided Waves and Applications to Structural Diagnosis,” invited presentation at the 7th European Nonlinear Dynamics Conference (ENOC 2011), Rome, July 2011.

“Adding Artificial Nerves to Engineering Structures,” invited presentation at the Osher Lifelong Learning Institute, UCSD Extension, San Diego, CA, March 2011.

“High-speed Rail Inspection System,” invited presentation at the Federal Railroad Administration Second R&D Program Review for the US Transportation Research Board, Washington DC, May 2011.

“Acoustic Emission at UCSD,” invited presentation at NDT Technology Day: Acoustic Emission and Ultrasonics in Universities, Mistras Group, Inc., University of Southern California, Los Angeles, CA, February 2011.

“Ultrasonic Guided Waves for Structural Health Monitoring,” invited presentation at the Department of Mechanical and Aerospace Engineering, University of California Los Angeles, November 2010.

“Ultrasonic Guided Waves for Structural Health Monitoring,” invited presentation at the Department of Mechanical Engineering, University of South Carolina, November 2010.

“Ultrasonic Guided Waves for the Structural Health Monitoring of Composite Aerospace Structures,” invited presentation at the School of Mechanical, Aerospace, Chemical and Materials Engineering, Arizona State University, January 2010.

“Non-contact Ultrasonic Guided Waves for Rail Defect Detection,” invited presentation at the Federal Railroad Administration R&D Program Review for the US Transportation research Board, Washington, DC, December 2009.

“Quantitative Structural Health Monitoring of Ship Hulls by Ultrasonic Guided Waves,” invited presentation at the Workshop on Structural Reliability of Ship Hulls, US Office of Naval Research, Washington, DC, July 2009.

“Research Activities in Ultrasonic Guided Waves for Structural Health Monitoring at UCSD,” invited presentation at the Department of Mechanical Engineering, University of Palermo, Italy, December 2008.

“Wavelet Feature Extraction and Pattern Recognition in Imagery Surveillance,” invited presentation at the US National Science Foundation, EXP Grantees Conference, Washington DC, January 2008.

12

“Quantitative Detection of Bond Defects in Composite Aircraft Panels by Global-Local Ultrasonic Models,” invited presentation at SAMPE Conference, Long Beach, CA, May 2008.

“Defect Detection in Composite Structures by Wave Propagation Techniques,” invited presentation at the Los Alamos Workshop on Composites Damage Modeling, Los Alamos National Laboratory, August 2007.

“Non-contact Ultrasonic Rail Flaw Detection,” invited presentation at the World Forum on Smart Materials and Smart Structures Technology (SMSST07), Chongquing and Nanjing, China, May 2007.

“Ultrasonic Guided Waves for Structural Health Monitoring: Semi-analytical Finite Element Modeling and Inspection Prototype for Railroad Tracks,” invited presentation at the Department of Civil and Environmental Engineering, University of California, Los Angeles, November 2006.

“Research Activities in NDE at UCSD Using Ultrasonic Guided Waves,” invited presentation at the Technical Meeting of the San Diego Section of the American Society for Nondestructive Testing, April 2005

“Ultrasonic Guided Waves for Structural Health Monitoring: Background and Application to Aerospace and Civil Structures,” invited presentation at the Department of Structural Engineering, University of Bologna, Italy, July 2004

“Ultrasonic Guided Waves for Structural Health Monitoring: Background and Application to Aerospace and Civil Structures,” invited presentation at the Department of Mechanical and Structural Engineering, University of Trento, Italy, July 2004

“Research in Nondestructive Evaluation at UCSD,” invited presentation at the Nondestructive Characterization Center, Lawrence Livermore National Laboratory, June 2001

“Non-contact Ultrasonics for Materials Nondestructive Evaluation,” invited presentation at the 138th Meeting of the Acoustical Society of America, Columbus, Ohio, November 1999

“Remote Nondestructive Evaluation of Structural Materials,” invited presentation at the 14th Annual Spring Meeting of the Center for Nondestructive Evaluation, The Johns Hopkins University, April 1999

“Advances in Optical Methods for Non-contact Nondestructive Evaluation of Structures,” invited presentation at the Smart Structures Group, Naval Research Laboratory, Washington D.C., September 1999

“Phase-Shifting Digital Speckle Pattern Interferometry: Image Processing Algorithms and Application to Pin-Fastened Joints,” invited presentation at the 13th Annual Spring Meeting of the Center for Nondestructive Evaluation, The Johns Hopkins University, April 1998

“New Directions in Optical Methods for Experimental Mechanics,” invited presentation at the Department of Mechanical Engineering, The Johns Hopkins University, September 1998

Funded Research Grants “Model-based infrared sensing for quantitative defect detection in composite structures,” (PI, US

National Science Foundation – CMMI Division/Sensors and Sensing Systems (SSS) Program - $300,000, 08/01/2014 – 07/31/2018).

“Development of rail flaw imaging technology based on ultrasonic tomography – Phase III,” (PI, US Department of Transportation – Federal Railroad Administration, $149,024, 09/21/2016-03/20/2018).

“Non-contact rail inspection prototype improvements,” (PI, US Department of Transportation – Federal Railroad Administration, Basic agreement thru amendment 5, $1,600,431, 07/01/11-09/30/2017).

“Non‐destructive evaluation methods for detecting major damage in internal composite structural components,” (co-PI, with H. Kim as PI, US Federal Aviation Administration – Joint Center of Excellence for Advanced Materials, $357,555, 06/1/14-12/31/17).

13

“Automated measurement of stress in continuous welded rail – artificial heating option study,” basic agreement and amendment 1 (PI, US Department of Transportation – Federal Railroad Administration, $299,654, 07/01/2014-03/31/2016).

“Adaptive system based on macro-fiber composite transducers for vibration control and noise reduction in wind turbine blades,” (PI, US National Science Foundation, $349,056, 09/15/10-08/31/14).

“Automated measurement of stress in CWR- Phase III,” basic agreement thru amendment 4 (PI, US Department of Transportation – Federal Railroad Administration, $808,701, 09/01/2010-06/30/2014).

“DDAS: computational steering of large-scale structural systems through advanced simulation, optimization, and structural health monitoring,” (co-PI, with Y. Bazilevs as PI, US Air Force Office of Scientific Research, $334,370, 01/01/12-09/27/2013).

“Structural health monitoring of turbine blades using advanced infrared thermography,” (PI with A. Manohar as co-PI, US Department of Energy - San Diego Regional Renewable Energy Technology Acceleration Program, $45,000, 08/15/11-08/14/12).

Est. $30,000 of in-kind donation of labor and materials from Burlington Northern Santa Fe (BNSF) Railway for upgrade of UCSD/FRA Large-scale Rail NT/Buckling Test-bed at the Powell Laboratories, fall 2012.

“Automated measurement of stress in continuous welded rail including buckling detection – Task 3” (PI with C-M. Uang as co-PI, US Department of Transportation – Federal Railroad Administration, $288,700, 07/01/10-12/31/11).

“Stress prediction through nonlinear ultrasonics in waveguides,” (PI with R. Phillips as co-PI, American Society for Nondestructive Testing Research Fellowship Award, $15,000, 07/01/10-06/30/11).

“Stress prediction through nonlinear ultrasonics in waveguides,” (PI, American Society for Nondestructive Testing - Fellowship Award, $15,000, 07/01/10-06/30/11)

“Real-time in-situ impact and damage locator in anisotropic aerospace structures” (PI, US Air Force Office of Scientific Research, $100,000, 06/15/09-03/31/10).

“Dynamic response during blast in viscoelastic structures,” (co-PI, with R. Asaro as PI and H. Kim as co-PI, US Office of Naval Research, $1,450,605, 07/01/08-06/30/10).

“Rail defect detection system prototype development” (PI, US Department of Transportation – Federal Railroad Administration, $440,588, 12/01/09-12/31/10).

“On-line high-speed rail defect detection - Amendment 8” (PI, US Department of Transportation – Federal Railroad Administration, $238,510, 03/01/09-11/31/09).



“EXP-SA: Wavelet feature extraction and pattern recognition in imagery surveillance for detecting roadside explosives” (PI, US National Science Foundation, Program in Explosives and Related Threats: Frontiers in Prediction and Detection (EXP), $374,345, 09/01/07-08/31/10).

“In-situ adhesive bond assessment for aerospace structures” (co-PI with M. Todd as PI, US Air Force Office of Scientific Research, $316,375, 12/1/06-11/30/09).

“Proof-of-concept studies in novel guided wave methods for metallic structural condition diagnostics” (co-PI with M. Todd as PI, US Office of Naval Research, $60,000, 06/1/08-03/31/09).

“Health monitoring to detect failure of prestressing (PS) cables in segmental box-girder bridges” (PI, California Department of Transportation, $292,037, 06/15/06-06/30/08).


14


“On-line high-speed rail defect detection - Amendment 4” (PI, US Department of Transportation – Federal Railroad Administration, $251,453 (of which $27,326 university matching), 08/30/06-03/31/08).




“On-line high-speed rail defect detection - Basic Agreement” (PI, US Department of Transportation – Federal Railroad Administration, $45,000, 09/06/02-10/01/03).

“Built-in system for the structural health monitoring of adhesively-bonded components in aerospace structures” (PI, American Society for Nondestructive Testing Research Fellowship Award, $15,000, 06/30/06-06/30/07).

“Structural integrity monitoring of UAV composite wings” (co-PI with J. Kosmatka as PI and J. Conte as co-PI, Los Alamos-UCSD Educational Collaboration – Task 2, $700,000, 07/31/03-09/30/08)

“Health monitoring of multi-strand steel tendons and cable stays for civil structures” (PI with F. Seible as co-PI, US National Science Foundation, $180,000, 09/15/02-08/31/06)

“Sensing system for quantitative health assessment of bonded components in smart aircraft structures” (PI with G. Park as co-PI, UCSD/ Los Alamos National Laboratory Cooperative Agreement on Research and Education (CARE), $226,000, 07/01/04-06/30/06)

“Evaluate the effects of fabrication procedures and weld melt-through on fatigue resistance of steel orthotropic deck welds” (co-PI with C-M. Uang as PI, California Department of Transportation, $745,000, 06/15/04-11/30/05)

“Apparatus for the inspection of pipes and tubes” (PI, Von Liebig Center, $49,000, 08/01/03-12/31/04)

“Development of undergraduate course SE163 – Nondestructive Evaluation” (PI with V. Karbhari as co-PI, American Society for Nondestructive Testing – Faculty Grant Award, $20,000, 07/01/03-06/30/04)

“Load measurement and health monitoring in cable stays via guided wave magnetostrictive ultrasonics” (PI, American Society for Nondestructive Testing - Fellowship Award, $15,000, 07/01/02-06/30/04)

“Attacking the aging aircraft problem” (PI, Hellman Foundation– Fellowship Award, $20,000, 07/01/02-06/30/03)

“Health monitoring of I-5/Gilman Advanced Technology Bridge” (co-investigator with F. Seible and V. Karbhari as PIs, California Department of Transportation, Federal Highway Administration, National Science Foundation, $40,000, 08/30/01-07/31/03)

“Development of a non-contact remote ultrasonic system for the non-destructive inspection of railroad tracks” (PI, US National Science Foundation, $174,690, 10/01/00-09/30/03).

“Ultrasonic non-destructive evaluation of aging aircraft” (PI, UCSD Academic Senate, $5,172, 03/15/01-03/29/02)

“Visualization of ultrasonic waves in fiber-reinforced composite materials” (PI, UCSD Academic Senate, $6,695, 03/15/00-03/31/01)

“Air-coupled ultrasonics for the non-destructive inspection of fiber-reinforced composites” (PI, Hellman Foundation – Fellowship Award, $15,000, 07/01/00-06/30/01)

Equipment donation: ultrasonic immersion scanning system (BFGoodrich Aerospace Corporation, San Diego, CA, $60,000, 06/26/00)

15

Courses Taught at UCSD Undergraduate courses: Solid Mechanics I (SE110A): every year since 2001/02. Last six-year average course approval:

95%. Last six-year average instructor approval: 85.5%. Solid Mechanics I (MAE131A): every year since 2001/02. Last six-year average course approval:

95%. Last six-year average instructor approval: 84.8%. Solid Mechanics II (SE110B): every year 2001/02 to 2009/10. Last six-year average course

approval: 87.6%. Last six-year average instructor approval: 96%. Non-destructive Evaluation (SE 163): every year since 2001/02. Last six-year average course

approval: 98.2%. Last six-year average instructor approval: 98.2%. Freshmen Seminar “Smart Structures: Challenges, Dreams and Reality (SE87): every year

2008/09 to 2012/13 and 2015. Last six-year average course approval: 100%. Last six-year average instructor approval: 100%.

Graduate courses: Experimental Mechanics and NDE (SE 252): every year since 2001/02. Last six-year average

course approval: 97.8%. Last six-year average instructor approval: 97.4%. Course Evaluation breakdowns - past six years (2011-2017)

SP 2017

WI 2017

WI 2016

FA 2015

SP 2015

WI 2015

SP 2014

WI 2014

SP 2013

FA 2012

SP 2012

WI 2012

SP 2011

WI 2011

SE87 – Smart Structures

(undergraduate)

Enroll 13

Rec class 100%

Rec instr

100%

Enroll 10

Rec class 100%

Rec instr

100%

SE110A - Solid

Mechanics I (undergraduate)

Enroll 65

Rec class 100%

Rec instr 94%

Enroll 63

Rec class 98%

Rec instr 92%

Enroll100

Rec class 94%

Rec instr 83%

Enroll101

Rec class 90%

Rec instr 61%

Enroll 20

Rec class 93%

Rec instr 93%

Enroll133

Rec class 95%

Rec instr 90%

MAE131A - Solid

Mechanics I (undergraduate)

Enroll54

Rec class 89%

Rec instr 92%

Enroll23

Rec class 92%

Rec instr 83%

Enroll27

Rec class 85%

Rec instr 88%

Enroll26

Rec class 79%

Rec instr 68%

Enroll20

Rec class 93%

Rec instr 93%

SE163 Non-

Destructive Evaluation

(undergraduate)

Enroll67

Rec class100%

Rec instr

100%

Enroll62

Rec class 94%

Rec instr 96%

Enroll63

Rec class98%

Rec instr 96%

Enroll62

Rec class97%

Rec instr 97%

Enroll42

Rec class 100%

Rec instr

100%

Enroll27

Rec class 100%

Rec instr

100%

16

SE252 Experimental Mechanics and NDE (graduate)

Enroll14

Rec class 100%

Rec instr

100%

Enroll9

Rec class 88%

Rec instr 88%

Enroll14

Rec class 100%

Rec instr

100%

Enroll21

Rec class 100%

Rec instr

100%

Enroll38

Rec class 97%

Rec instr 94%

Enroll26

Rec class 100%

Rec instr

100%

Enroll25

Rec class 100%

Rec instr

100%

Six-year average class approval: 95% Six-year average instructor approval: 93% Supervision of Student Research Former Students Currently in Academia Piervincenzo Rizzo (Ph.D. 2003, now Associate Professor at University of Pittsburgh) Ivan Bartoli (Ph.D 2007, now Associate Professor at Drexel University) Salvatore Salamone (2010 Post-Doc, now Associate Professor at University of Texas, Austin) Ankit Srivastava (Ph.D. 2009, now Assistant Professor at Illinois Institute of Technology,

Chicago) Alessandro Marzani (M.S. 2004, now Professor at University of Bologna, Italy) Gaetano Restivo (M.S. 2004, now Assistant Professor at Santa Clara University) Stefano Mariani (Ph.D. 2015, now Research Associate at Imperial College, London) Lei Zhang (2010 Post-Doc, now Associate Professor at Southeast University, China) Xuan (Peter) Zhu (P.D. 2016) – (currently post-doc at University of Illinois Urbana-Champagne) Piotr Kijanka (Ph.D. 2015, now Postdoc at AGH, University of Science and Technology) Sydney Sroka (research B.S. 2013, now Ph.D. student at Massachusetts Institute of Technology)

Project Scientists Stefano Coccia (2006-2010) Ivan Bartoli (2007-2010) - currently Associate Professor at Drexel University, Philadelphia Piervincenzo Rizzo (2005-2007) - currently Associate Professor at University of Pittsburgh Post-doctoral Fellows Xuan (Peter) Zhu (2016-17) – currently post-doc at University of Illinois Urbana-Champagne Lei Zhang (2009-2010) – currently Associate Professor at Southeast University, China Salvatore Salamone (2007-2010) - currently Associate Professor at University of Texas, Austin Stefano Mariani (2015-2016) – currently Research Associate at Imperial College, London Doctoral Students (primary advisor) Simone Sternini, Ph.D. candidate (current) Margherita Capriotti, Ph.D. candidate (current) Albert Liang, Ph.D. candidate (current) Ranting Cui, Ph.D. candidate (current) Xuan Peter Zhu, Ph.D. 2016. Dissertation: “Non-destructive and Semi-destructive Methods for

Thermal Stress Measurement in Continuous Welded Rails” (currently post-doc at University of Illinois Urbana-Champagne)

Thompson Nguyen, Ph.D. 2015. Dissertation: “Applications Of Ultrasonic Nondestructive Evaluation And Ultrasonic Defect Imaging On Rails” (currently self-employed)

17

Stefano Mariani, Ph.D. 2015. Dissertation: “Noncontact Ultrasonic Guided Wave Inspection of Rails: Next Generation Approach” (currently Research Associate at Imperial College, London)

Jeffrey Tippmann, Ph.D. 2014. Dissertation “Damage inspection using ambient noise with application to composite wind turbine blades” (currently senior scientist at Applied Physical Sciences, Denver, CO).

Ankit Srivastava, Ph.D. 2009. Dissertation “Quantitative structural health monitoring by ultrasonic guided waves” (currently Assistant Professor at Illinois Institute of Technology, Chicago)

Claudio Nucera, Ph.D. 2012. Dissertation “Propagation of nonlinear waves in waveguides and application to nondestructive stress measurement” (currently senior scientist at Deutche Bank)

Robert Phillips, Ph.D. 2012. Dissertation: “Ultrasonic methods for rail inspection” (deceased in May 2015).

Arun Manohar, Ph.D. 2012. Dissertation: “Quantitative nondestructive testing using infrared thermography” (currently at SAS Institute, Inc., San Diego, CA)

Ivan Bartoli, Ph.D. 2007. Dissertation: “Ultrasonic guided wave models for structural health monitoring” (currently Associate Professor at Drexel University, Philadelphia)

Stefano Coccia, Ph.D. 2007. Dissertation: “Structural health monitoring of railroad tracks” (currently self-employed)

Salvatore Salamone, co-advisor, Ph.D. 2007 (University of Palermo. Advisor: Di Paola). Dissertation: “Structural monitoring of adhesive joints in structures by built-in piezoelectric ultrasonic transducers accounting for temperature effects” (currently Associate Professor at University of Texas, Austin)

Howard Matt, Ph.D. 2006. Dissertation: “Structural diagnostics of CFRP composite aircraft components by ultrasonic guided waves and built-in piezoelectric transducers” (currently at ATA Engineering, San Diego, CA)

Piervincenzo Rizzo, Ph.D. 2004. Dissertation: “Health monitoring of tendons and stay cables for civil structures” (currently Associate Professor at University of Pittsburgh)

John McNamara, Ph.D. 2003. Dissertation: “Health monitoring of railroad tracks by elastic-wave based non-destructive testing”

Master’s Students (research thesis) Thompson Nguyen, M.S. 2011. Francesco Graziotti, M.S. 2010. Thesis: “Seismic bridge response modification due to

degradation of viscous dampers performance” (G. Benzoni primary advisor). Claudio Nucera, co-advisor, Laurea 2009 (University of Palermo. Advisor: Rizzo). Thesis:

“Nonlinear ultrasonic guided waves for stress monitoring in prestressing tendons for post-tensioned concrete structures”

Marzia Mezzanotte, co-advisor, Laurea 2009 (University of Palermo. Advisor: Ajovalasit). Thesis: “Determination of amplitude and frequency content of impact forces on plates from acoustic emissions”

Patrizia Di Leo, co-advisor, Laurea 2009 (University of Palermo. Advisor: Ajovalasit). Thesis: “Impact location in plates by acoustic emission”

Jacob Finkler, M.S. 2007. Thesis: “Transmission, reflection and diffraction measurements of ultrasonic guided waves for the structural monitoring of composite aircraft wings”

Gaetano Restivo, M.S. 2004. Thesis: “Damage detection in aircraft structures by multi-sensor ultrasonic inspection” (currently Assistant Professor at Temple University, Philadelphia)

Alessandro Marzani, M.S. 2004. Thesis: “Guided wave modeling for bond inspection in aerospace structures” (currently Associate Professor at University of Bologna)

Elisa Sorrivi, co-advisor, Laurea 2004 (University of Bologna. Advisor: Viola). Thesis: “Identification of structural modal parameters by the Wavelet Transform”

Joshua Robinson, M.S. 2002. Thesis: “Bond quality assessment by ultrasonic guided waves” Daniel Tuzzeo, co-advisor, Laurea 2001 (University of Palermo. Advisor: Ajovalasit). Thesis:

“Ultrasonic inspection of aluminum plates by non-contact techniques”

18

Massimo Bonomo, co-advisor, Laurea 2001 (University of Palermo. Advisor: Ajovalasit). Thesis: “Photoelastic visualization of ultrasonic waves”

Master’s Students (comprehensive exam – primary advisor)

Dawei Wang/Advisor, M.S. 2017, SE/UCSD Jashien Zhang/Advisor, M.S. 2016, SE/UCSD Tan Wang/Advisor, M.S. 2016, SE/UCSD Abdullah Hamid/Advisor, M.S. 2016, SE/UCSD Sangwoo Yang/Advisor, M.S. 2016, SE/UCSD Michael Mah/Advisor, M.S. 2015, SE/UCSD Jody Cheung/Advisor, M.S. 2015, SE/UCSD Morgan Joel/Advisor, M.S. 2015, SE/UCSD Octavio Cortes-Macouzet, M.S. 2015, SE/UCSD Henry Li/Advisor, M.S. 2014, SE/UCSD Timothy Hathaway/Advisor, M.S. 2014, SE/UCSD Lance Raby/Advisor, M.S. 2013, SE/UCSD Peter Duong/ Advisor, M.S. 2013, SE/UCSD Janice Lam/Advisor, M.S. 2013, SE/UCSD Sara Read/Advisor, M.S. 2012, SE/UCSD Peter Duong/ Advisor, M.S. 2013, SE/UCSD Nathan Fields/ Advisor, M.S. 2009, SE/UCSD. Kenneth Anthony/ Advisor, M.S. 2009, SE/UCSD. Tina Firouz/ Advisor, M.S. 2010, SE/UCSD. Alison Young/Advisor, M.S. 2010, SE/UCSD. Marc Schommer/Advisor, M.S. 2010, SE/UCSD. Guy Kelsey/Advisor, M.S. 2011, SE/UCSD. Christina Thung/Advisor, M.S. 2011, SE/UCSD. Matthew Wickens/Advisor, M.S. 2011, SE/UCSD. Wai Lun Wayne Tsang/Advisor, M.S. 2011, SE/UCSD. Timothy Agnew/Advisor, M.S. 2002, SE/UCSD. Mania Houspian/Advisor, M.S. 2004, SE/UCSD. Jesse Melrose/Advisor, M.S. 2006, SE/UCSD.

Undergraduate Research Assistants Liam Brown (2016/2017) Yichao Yang (2014/15) Sydney Sroka (2012/2013) Raquel Watchfogel, Eleanor Roosevelt College Sophomore Honors Research Program (2012) UCSD MAE156B Capstone Design Project Team (6 students) on project “Motorized cart for the

UCSD/FRA rail inspection project” (2011) Kaicheng Ding (2010/2011) David Brisco (2011) Robert Phillips (2006/2007) Gabriel Jen, Faculty Mentor Program (2003/2004) Timothy Alexander, Faculty Mentor Program (2003) Michael Palmer, Faculty Mentor Program (2001/2002). International Visiting Students/Visiting Professors Roberto Montanini, visiting professor from the University of Messina, Italy (2016). Antonino Quattrocchi, visiting student from the University of Messina, Italy (2016/17).

19

Piotr Kijanka, visiting student from Polish Institute of Science, Crakow, Poland (2012/13). Stefano Rignanese, visiting student from the University of Bologna, Italy, (2011-2012) Annamaria Pau, visiting professor from University of Rome-La Sapienza (2010/2011 and

2012/2013) Alessandro Marzani, visiting professor from University of Bologna (2009) Claudio Nucera, visiting student - Laurea (MS) candidate from University of Palermo (2008).

Thesis: “Nonlinear ultrasonic guided waves for stress monitoring in prestressing tendons for post-tensioned concrete structures”

Marzia Mezzanotte, visiting student - Laurea (MS) candidate from University of Palermo (2008). Thesis: “Determination of amplitude and frequency content of impact forces on plates from acoustic emissions”

Patrizia Di Leo, visiting student- Laurea (MS) candidate from University of Palermo (2008). Thesis: “Impact location on plates by acoustic emission”

Giuseppina Vitale, visiting student - Ph.D. candidate from Technical University of Bari. (2007/2008). Dissertation: “Wavelet-aided image processing”

Salvatore Salamone, visiting student from the University of Palermo, Italy, 2005-2007 (co-advised Ph.D. Dissertation “Structural monitoring of adhesive joints in structures by built-in piezoelectric ultrasonic transducers accounting for temperature effects”).

Elisa Sorrivi, visiting student- Ph.D. candidate from University of Bologna (2006/2007). Dissertation: “Health monitoring of prestressing tendons”

Daniel Tuzzeo, visiting student from the University of Palermo, Italy, 2000-2001 (co-advised M.S. thesis “Ultrasonic inspection of aluminum plates by non-contact techniques”).

Massimo Bonomo, visiting student from the University of Palermo, Italy, 2000-2001 (co-advised M.S. thesis “Photoelastic visualization of ultrasonic waves”).

20

PUBLICATIONS Book Chapters (invited) 1. Lanza di Scalea, F., Srivastava, A. and Nucera, C., “Nonlinear Guided Waves and Thermal

Stresses,” Chapter 9 of Nonlinear Acoustic Techniques for Nondestructive Evaluation, ed. by T. Kundu, Acoustical Society of American, Springer, 2017.

2. Lanza di Scalea, F. and Cloud, G., Nondestructive Testing Chapter, 12th edition of the Standard Mechanical Engineering Mark’s Handbook, McGraw Hill, 2017.

3. Tippmann, J.D. and Lanza di Scalea, F., “Passive-Only Defect Detection and Imaging in Composites Using Diffuse Fields,” Mechanics of Composite and Multi-functional Materials, Volume 7, K. Zimmerman (Ed.), 978-3-319-21761-1, 339221-1-En, (8), Springer, 2015.

4. Nucera, C. and Lanza di Scalea, F., “Ultrasonic Nonlinear Guided Waves and Applications to Structural Health Monitoring,” Residual Stress, Thermomechanics & Infrared Imaging, Hybrid Techniques and Inverse Problems, Volume 8, M. Rossi et al. (eds.), DOI 10.1007/978-3-319-00876-9_16, The Society for Experimental Mechanics, Inc., 2014.

5. Lanza di Scalea, F., Kim, H., White, S., Chen, Z., Salamone, S., and Bartoli, I., “Impact Monitoring In Aerospace Panels Via Piezoelectric Rosettes,” Composite Materials and Joining Technologies for Composites, Vol. 7, E. Patterson et al. (eds.), 7 pgs., 2012.

6. Nucera, C. and Lanza di Scalea, F., “Higher Harmonic Generation Analysis in Complex Waveguides via a Nonlinear Semi-Analytical Finite Element Algorithm," Mathematical Problems in Engineering, Special Issue on New Strategies and Challenges in SHM for Aerospace and Civil Structures, Hindawi Publishing Corporation, vol. 2012, doi:10.1155/2012/365630, 16 pgs., 2012.

7. Rizzo, P., Coccia, S., Bartoli, I., and Lanza di Scalea, F., “Non-contact Rail Monitoring by Ultrasonic Guided Waves,” Chapter 145 of Encyclopedia of Structural Health Monitoring, C. Boller, F-K. Chang, and Y. Fujino, eds., John Wiley & Sons, Chichester, U.K., pp. 2397-2410, 2009.

8. Lanza di Scalea, F., Bartoli, I., Rizzo, P., Marzani, A., Sorrivi, E., and Viola, E., “Structural Health Monitoring of Multi-wire Strands,” Chapter 151 of Encyclopedia of Structural Health Monitoring, C. Boller, F-K. Chang, and Y. Fujino, eds., John Wiley & Sons, Chichester, U.K., pp. 2487-2503, 2009.

9. Lanza di Scalea, F., Rizzo, P., Coccia, S., Bartoli, I., and Fateh.M., “On-Line High-speed Rail Defect Detection – Phase III,” Chapter 4 of Technology in Rail Transport Management, P.S. Ranade, ed., The Icfai University Press, India, pp. 55-65, 2007.

10. Lanza di Scalea, F. “Ultrasonic Testing Applications in the Railroad Industry,” Chapter 15: Special Applications of Ultrasonic Testing, in Non-destructive Testing Handbook, 3rd edition, P.O. Moore, ed., American Society for Nondestructive Testing, pp. 535-552, 2007.

11. Rizzo, P. and Lanza di Scalea, F. “Wavelet-based Unsupervised and Supervised Learning Algorithms for Ultrasonic Structural Monitoring of Waveguides,” Chapter 8, Progress in Smart Materials and Structures Research, P. L. Reece, ed., Nova Editorial, pp. 227-290, 2006.

Journal Articles 12. Lanza di Scalea, F., Zhu, X., Capriotti, M., Liang, A., Mariani, S., and Sternini, S., “Passive

Extraction of Dynamic Transfer Function from Arbitrary Ambient Excitations: Application to High-speed Rail Inspection from Wheel-generated Waves,” ASME Journal of Nondestructive Evaluation, Diagnostics and Prognostics of Engineering Systems, 1(1), pp. 0110051- 01100512, 2018.

13. Mariani, S., Nguyen, T., and Lanza di Scalea, F., “Air-Coupled Ultrasonic Testing of Rails: Experimental Prototype and Finite Element Simulations,” Materials Evaluation, in press, 2017.

14. Mariani, S. and Lanza di Scalea, F., “Predictions of Defect Detection Performance of Air-Coupled Ultrasonic Rail Inspection System,” Structural Health Monitoring (SHM) International Journal, pp. 1-22, published online July 2017 (DOI: 10.1177/1475921717715429).

21

15. Lanza di Scalea, F., Sternini, S. and Nguyen, T., “Ultrasonic Imaging in Solids Using Wave Mode Beamforming,” IEEE Transactions on Ultrasonics, Ferroelectrics and Frequency Control (IEEE-UFFC), 64(3), pp. 602-616, 2017.

16. Capriotti, M., Kim, HE, Lanza di Scalea, F., and Kim, H., “Nondestructive Inspection of Impact Damage in Composite Aircraft Panels by Ultrasonic Guided Waves and Statistical Processing,” (invited paper) Materials Journal, Special Issue on Structural Health Monitoring for Aerospace Applications, V. Giurgiutiu and S. Yuan eds., MDPI, Switzerland, 10, 616, pp. 1-12, 2017.

17. Mariani, S., Nguyen, T., Zhu, X. and Lanza di Scalea, F., “Field Test Performance of Non-contact Ultrasonic Rail Inspection System,” ASCE Journal of Transportation Engineering, Part A: Systems, 143(5), 2017.

18. Zhu, X. and Lanza di Scalea, F., “Thermal Stress Measurement in Continuous Welded Rails Using the Hole-Drilling Method,” Experimental Mechanics, 57, pp. 165-178, 2017.

19. Zhu, X. and Lanza di Scalea, F., “Sensitivity to Axial Stress of Electro-Mechanical Impedance Measurements,” Experimental Mechanics, 56, pp. 1599-1610, 2016.

20. Pau, A. and Lanza di Scalea, F., “Nonlinear Guided Wave Propagation in Prestressed Plates,” Journal of the Acoustical Society of America, 137(3), pp. 1529-1540, 2015.

21. Bazilevs, Y., Deng, X., Korobenko, A., Lanza di Scalea, F., Todd, M.D. and Taylor, S.G., “Isogeometric Fatigue Damage Prediction in Large-Scale Composite Structures Driven by Dynamic Sensor Data,” ASME Journal of Applied Mechanics, 82(9), pp. 0910081-09100812, 2015.

22. Kijanka, P., Manohar, A., Lanza di Scalea, F. and Staszewski, W., "Damage Location by Ultrasonic Lamb Waves and Piezoelectric Rosettes", Journal of Intelligent Materials Systems and Structures, in press (doi: 10.1177/1045389X14544140), 2015.

23. Kijanka, P, Packo, P., Zhu, X., Staszewski, WJ., and Lanza di Scalea, F., “Actuation Stress Modelling of Piezoceramic Transducers Under Variable Temperature Field,” Journal of Intelligent Materials Systems and Structures, in press (doi: 10.1177/1045389X15571382), pp. 1-13, 2015.

24. Nucera, C., White, S., Chen, Z. M., Kim, H., and Lanza di Scalea, F., “Impact Monitoring In Stiffened Composite Aerospace Panels By Wave Propagation,” Structural Health Monitoring International Journal, 14(6), pp. 547-557, 2015.

25. Kijanka, P, Packo, P., Zhu, X., Staszewski, WJ., and Lanza di Scalea, F., “Three-Dimensional Temperature Effect Modelling of Piezoceramic Transducers Used for Lamb Wave Based Damage Detection,” Smart Materials and Structures, 24(6), pp. 1-10, 2015.

26. Nucera, C. and Lanza di Scalea, F., “Modeling of Nonlinear Guided Waves and Applications To Structural Health Monitoring,” ASCE Journal of Computing in Civil Engineering, Special Issue on Computing, SangHyun Lee, Burcin Becerik-Gerber, and Ioannis Brilakis, eds., 29(4), pp. B40140011- B401400115, 2015. (invited paper)

27. Tippmann, J., Zhu, P., and Lanza di Scalea, F.,” Application of Damage Detection Methods Using Passive Reconstruction of Impulse Response Functions,” Philosophical Transactions of the Royal Society A – Mathematical, Physical and Engineering Sciences, Special Issue on New Perspectives in Offshore-Wind and Sea-Wave Energy Production, 373(2035), pp. 1-17, 2015. (invited paper)

28. Nucera, C. and Lanza di Scalea, F., “Nondestructive Measurement of Neutral Temperature in Continuous Welded Rails By Nonlinear Ultrasonic Guided Waves,” Journal of the Acoustical Society of America, 136(5), pp. 2561-2574, 2014.

29. Tippmann, J. and Lanza di Scalea, F., “Passive-Only Damage Detection by Reciprocity of Green’s Functions Reconstructed From Diffuse Acoustic Fields with Application to Wind Turbine Blades,” Journal of Intelligent Material Systems and Structures, in press (doi: 10.1177/1045389X14538539), published on-line before print 2014.

30. Nucera, C. and Lanza di Scalea, F., “Nonlinear Wave Propagation in Constrained Solids Subjected To Thermal Loads,” Journal of Sound and Vibration, 333(2), pp. 541-554, 2014.

31. Nucera, C. and Lanza di Scalea, F., “Nonlinear Semi-Analytical Finite Element Algorithm for the Analysis of Internal Resonance Conditions In Complex Waveguides,” ASCE Journal of Engineering Mechanics, 140(3), pp. 502-522, 2014.

22

32. Manohar, A. and Lanza di Scalea, F., “Wavelet-aided Multivariate Outlier Analysis to Enhance Defect Contrast in Thermal Images,” Experimental Techniques, 38(1), pp. 28-37, 2014.

33. Manohar, A. and Lanza di Scalea, F., “Detection of Defects In Wind Turbine Composite Blades Using Statistically-Enhanced Lock-In Thermography,” Structural Health Monitoring International Journal, Special Issue on Noncontact Measurement Technologies, 12(5-6), pp. 566-574, 2014.

34. Mariani, S., Nguyen, T., Phillips, R., Kijanka, P., Lanza di Scalea, F., Staszewski, W., Fateh, M. and Carr, G., “Non-Contact Air-Coupled Ultrasonic Guided Wave Inspection of Rails,” Structural Health Monitoring International Journal, Special Issue on Noncontact Measurement Technologies, 12(5-6), pp. 539-548, 2014.

35. Manohar, A. and Lanza di Scalea, F., “Modeling 3-D Heat Flow Interaction with Defects in Composite Materials for Infrared Thermography,” NDT&E International Journal, 66, pp. 1-7, 2014.

36. Manohar A. and Lanza di Scalea, F., “Determination of Defect Depth and Size Using Virtual Heat Sources in Pulsed Infrared Thermography,” Experimental Mechanics, 53(4), pp. 661-671, 2013.

37. Nucera, C., Phillips, R., Lanza di Scalea, F., Fateh, M. and Carr, G., “RAIL-NT System for the In-situ Measurement of Neutral Temperature in CWR: Results from Laboratory and Field Tests,” Transportation Research Record: Journal of the Transportation Research Board, no. 2374, Washington DC, pp. 154-161, 2013.

38. Lanza di Scalea, F., Rizzo, P., Salamone, S., Bartoli, I., Al-Nazer, L., “Ultrasonic Tomography for Three-Dimensional Imaging of Internal Rail Flaws: Proof-of-principle Numerical Simulations,” Transportation Research Record: Journal of the Transportation Research Board, no. 2374, Washington DC, pp. 162-168, 2013.

39. Nucera, C., Phillips, R., and Lanza di Scalea, F., “Ultrasonic Guided Wave Monitoring of Railroad Tracks,” Advances in Science and Technology, 83, pp. 198-207, 2013.

40. Phillips, R., Zhu, X., and Lanza di Scalea, F., “The Influence of Stress on Electro-mechanical Impedance Measurements in Rail Steel,” Materials Evaluation, 70(10), pp. 1213-1218, 2012. (invited paper)

41. Salamone, S., Veletzsos, M., Lanza di Scalea, F., and Restrepo, J., “Detection of Initial Yield and Onset of Failure in Bonded Post-tensioned Concrete Beams,” ASCE Journal of Bridge Engineering, Special Issue on NDE/NDT for Bridge Inspection and Evaluation, 17(6), pp. 966-974, 2012.

42. Salamone, S., Bartoli, I., Phillips, R., Nucera, C., and Lanza di Scalea, F., “Health Monitoring of Prestressing Tendons in Post-Tensioned Concrete Bridges,” Journal of the Transportation Research Board, Transportation Research Record no. 2220, pp. 21-27, 2011.

43. Coccia, S., Phillips, R., Bartoli, I., Salamone, S., Lanza di Scalea, F., Fateh, M., and Carr, G., “UCSD/FRA Non-contact Ultrasonic Guided Wave System for Rail Inspection: An Update,” Journal of the Transportation Research Board, Transportation Research Record no. 2261, pp. 143-147, 2011.

44. Nucera, C. and Lanza di Scalea, F., “Monitoring Load Levels in Multi-wire Strands by Nonlinear Ultrasonic Waves,” Structural Health Monitoring International Journal, 10(6), pp. 617-629, 2011.

45. Coccia, S., Bartoli, I., Marzani, A., Lanza di Scalea, F., Salamone, S. and Fateh, M., “Numerical and Experimental Study of Guided Waves for Detection of Rail Head Defects,” NDT&E International, 44(1), pp. 93-100, 2011.

46. Bartoli, I., Salamone, S., Phillips, R., Lanza di Scalea, F. and Sikorsky, C., “Use of Interwire Ultrasonic Leakage to Quantify Loss of Prestress in Multiwire Tendons,” ASCE Journal of Engineering Mechanics, 137(5), pp. 324-333, 2011.

47. Rizzo, P., Cammarata, M., Bartoli, I., Lanza di Scalea, F., Salamone, S., Coccia, S. and Phillips, R., “Ultrasonic Guided Wave-based Monitoring of Rail Head: Laboratory and Field Tests,” Advances in Civil Engineering - Special Issue on Structural Health Monitoring for Civil Structures: From the Lab to the Field, vol. 2010, Art. ID 291293, pp. 1-13, 2010 (invited).

48. Bartoli, I., Phillips, R., Coccia, S., Srivasatava, A., Lanza di Scalea, F., Fateh, M. and Carr, G., “Stress Dependence of Ultrasonic Guided Waves in Rails,” Journal of the Transportation Research Board, Transportation Research Record no. 2159, pp. 91-97, 2010.

23

49. Srivastava, A. and Lanza di Scalea, F., “Quantitative Structural Health Monitoring by Ultrasonic Guided Waves,” ASCE Journal of Engineering Mechanics, 136(8), pp. 937-944, 2010.

50. Srivastava, A. and Lanza di Scalea, F., “Quantitative Structural Health Monitoring by Ultrasonic Guided Waves,” International Journal of Condition Monitoring and Diagnostic Engineering Management (COMADEM), Special Issue on Structural Health Monitoring, 13(1), pp. 26-33, 2010 (invited).

51. Srivastava, A. and Lanza di Scalea, F., “Higher-harmonic generation in Nonlinear Waveguides of Arbitrary Cross-section,” Journal of the Acoustical Society of America, 127(5), pp. 2790-2796, 2010.

52. Srivastava, A. and Lanza di Scalea, F., “On the Existence of Longitudinal or Flexural Waves in Rods at Nonlinear Higher Harmonics,” Journal of Sound and Vibration, 329, pp. 1499-1506, 2010.

53. Coccia, S., Salamone, S., Bartoli, I., Phillips, R., Lanza di Scalea, F., Fateh, M. and Carr, G., “Non-contact Ultrasonic Guided Wave Detection of Rail Defects,” Journal of the Transportation Research Board, Transportation Research Record, no. 2117, pp. 77-84, 2009.

54. Salamone, S., Bartoli, I., Di Leo, P., Lanza di Scalea, F., Ajovalasit, A., D’Acquisto, L., Rhymer, J., and Kim, H., “High-velocity Impact Location on Aircraft Panels Using Macro-fiber Composite Piezoelectric Rosettes,” Journal of Intelligent Materials Systems and Structures, 21(9), pp. 887-896, 2010.

55. Salamone, S., Bartoli, I., Lanza di Scalea, F., and Coccia, S., “Guided-wave Health Monitoring of Aircraft Composite Panels under Changing Temperature,” Journal of Intelligent Materials Systems and Structures, 20, pp. 1079-1090, 2009.

56. Srivastava, A. and Lanza di Scalea, F., “On the Existence of Symmetric or Antisymmetric Lamb Waves at Nonlinear Higher Harmonics,” Journal of Sound and Vibration, 323 (3-5), pp. 932-943, 2009.

57. Salamone, S., Fasel, T., Bartoli, I., Srivastava, A., Lanza di Scalea, F., and Todd, M., “Structural Health Monitoring of Adhesively-Bonded Joints in Aerospace Structures,” Materials Evaluation, Special Issue on Bond Inspection, pp. 828-836, July 2009 (invited).

58. Lanza di Scalea, F. and Salamone, S., “Temperature Effects in Ultrasonic Lamb-wave Structural Health Monitoring Systems,” Journal of the Acoustical Society of America, 124(1), pp. 161-174, 2008.

59. Salamone, S., Bartoli, I., Lanza di Scalea, F., and Coccia, S., “Temperature Effects on Guided Wave Based Macro-fiber Composite Transduction,” Materials Evaluation, 66(10), pp. 1071-1076, 2008 (ASNT Research Fellowship Award paper).

60. Bartoli, I., Salamone, S., Phillips, R., Lanza di Scalea, F., Coccia, S., and Sikorsky, C., “Monitoring Prestress Level in Seven-wire Prestressing Tendons by Inter-wire Ultrasonic Wave Propagation,” Journal of Advances in Science and Technology – Embodying Intelligence in Structures and Integrated Systems, 56, pp. 200-205, 2008.

61. Marzani, A., Viola, E., Bartoli, I., Lanza di Scalea, F., and Rizzo, P., “A Semi-analytical Finite Element Formulation for Modeling Stress Wave Propagation in Axisymmetric Damped Waveguides” Journal of Sound and Vibration, 318(3), pp. 488-505, 2008.

62. Sabra, K., Srivastava, A., Lanza di Scalea, F., Bartoli, I., Rizzo, P., and Conti, S., “Structural Health Monitoring by Extraction of Coherent Guided Waves from Diffuse Fields,” Journal of the Acoustical Society of America, 123(1), pp. EL8-EL13, 2008.

63. Rizzo, P., Sorrivi, E., Lanza di Scalea, F., and Viola, E., “Wavelet-based Outlier Analysis for Guided Wave Structural Monitoring: Application to Multi-wire Strands,” Journal of Sound and Vibration, 307(1-2), pp. 52-68, 2007.

64. Matt, H. and Lanza di Scalea, F., “Macro-fiber Composite Piezoelectric Rosettes for Acoustic Source Location in Complex Structures,” Smart Materials and Structures, 16(4), pp. 1489-1499, 2007.

65. Lanza di Scalea, F., Matt, H. and Bartoli, I., “The Response of Rectangular Piezoelectric Sensors to Rayleigh and Lamb Ultrasonic Waves,” Journal of the Acoustical Society of America, 121(1), pp. 175-187, 2007.

24

66. Lanza di Scalea, F., Matt, H., Bartoli, I., Coccia, S., Park, G. and Farrar, C., “Health Monitoring of UAV Wing Skin-to-spar Joints Using Guided Waves and Macro Fiber Composite Transducers,” Journal of Intelligent Material Systems and Structures, 18(4), pp. 373-388, 2007.

67. Park, G., Farrar, C., Lanza di Scalea, F., and Coccia, S., “Performance Assessment and Validation of Piezoelectric Active-Sensors in Structural Health Monitoring,” Smart Materials and Structures, 15, pp. 1673-1683, 2006.

68. Bartoli, I., Marzani, A., Lanza di Scalea, F., and Viola, E., “Modeling Wave Propagation in Damped Waveguides of Arbitrary Cross-section,” Journal of Sound and Vibration, 295(3-5), pp. 685-707, 2006.

69. Lanza di Scalea, F., Rizzo, P., Coccia, S., Bartoli, I. and Fateh, M., “Laser/air-coupled Hybrid Non-contact System for Defect Detection in Rail Tracks: Status of FRA Prototype Development at UC San Diego,” Journal of the Transportation Research Board, Transportation Research Record no. 1943, pp. 57-64, 2006.

70. Rizzo, P. and Lanza di Scalea, F., “Feature Extraction for Defect Detection in Strands by Guided Ultrasonic Waves,” Journal of Structural Health Monitoring, 5(3), pp. 297-308, 2006.

71. Rizzo, P. and Lanza di Scalea, F., “Wavelet-based Feature Extraction for Automated Defect Classification in Strands by Ultrasonic Structural Monitoring,” Smart Structures and Systems, 2(3), pp. 253-274, 2006.

72. Matta, F., Rizzo, P., Karbhari, V., and Lanza di Scalea, F., “Acoustic Emission Damage Assessment of Steel/CFRP Adhesive Bonds for Rehabilitation,” ASCE Journal of Composites for Construction, 10(3), pp. 265-274, 2006.

73. Lanza di Scalea, F., Bartoli, I., Rizzo, P. and Fateh, M., “High-speed Defect Detection in Rails by Non-contact Guided Ultrasonic Testing,” Journal of the Transportation Research Board, Transportation Research Record no. 1916, pp. 66-77, 2005.

74. Matt, H., Bartoli, I., and Lanza di Scalea, F., “Ultrasonic Guided Wave Monitoring of Composite Wing Skin-to-spar Bonded Joints in Aerospace Structures,” Journal of the Acoustical Society of America, 118(4), pp. 2240-2252, 2005.

75. Rizzo, P., Lanza di Scalea, F., Banerjee, S. and Mal, A., “Ultrasonic Characterization and Inspection of Open Cell Foams,” ASCE Journal of Engineering Mechanics, 131(11), pp. 1200-1208, 2005.

76. Rizzo, P., Bartoli, I., Marzani, A. and Lanza di Scalea, F., “Defect Classification in Pipes by Neural Networks Using Multiple Guided Ultrasonic Wave Features Extracted After Wavelet Processing,” ASME Journal of Pressure Vessel Technology, Special Issue on NDE of Pipeline Structures, 127(3), pp. 294-303, 2005. (invited)

77. Bartoli, I., Lanza di Scalea, F., Fateh, M. and Viola, E., “Modeling Guided Wave Propagation with Application to the Long-range Defect Detection in Railroad Tracks,” Nondestructive Testing & Evaluation (NDT & E) International, 38(5), pp. 325-334, 2005.

78. Lanza di Scalea, F., Rizzo, P., Coccia, S., Bartoli, I., Fateh, M., Viola, E. and Pascale, G., “Non-contact Ultrasonic Inspection of Rails and Signal Processing for Automatic Defect Detection and Classification,” Insight - Non-destructive Testing and Condition Monitoring, EURO Issue on NDT in the Rail Industry, 47(6), pp. 346-353, 2005. (invited)

79. Rizzo, P. and Lanza di Scalea, F., “Ultrasonic Inspection of Multi-wire Steel Strands with the Aid of the Wavelet Transform,” Smart Materials and Structures, 14(4), pp. 685-695, 2005.

80. Lanza di Scalea, F., Rizzo, P. and Marzani, A., "Propagation of Ultrasonic Guided Waves in Lap-shear Adhesive Joints: Case of Incident A0 Lamb Mode," Journal of the Acoustical Society of America, 115(1), pp. 146-156, 2004.

81. McNamara, J. and Lanza di Scalea, F., “Improvements in Non-contact Ultrasonic Testing of Rails by the Discrete Wavelet Transform,” Materials Evaluation, 62(3), pp. 365-372, 2004.

82. Lanza di Scalea, F. and McNamara, J., “Wavelet Transform for Characterizing Longitudinal and Lateral Transient Vibrations of Railroad Tracks,” Research in Nondestructive Evaluation, 15(2), pp. 87-98, 2004.

83. Rizzo, P. and Lanza di Scalea, F., “Wave Propagation in Multi-wire Strands by Wavelet-based Laser Ultrasound,” Experimental Mechanics, 44(4), pp. 407-415, 2004.

25

84. McNamara, J., Lanza di Scalea, F. and Fateh, M. “Automatic Defect Classification in Long-range Ultrasonic Rail Inspection Using a Support Vector Machine-based Smart System,” Insight - Non-destructive Testing and Condition Monitoring, EURO Issue on NDT in the Rail Industry, 46(6), pp. 331-337, 2004. (invited)

85. Lanza di Scalea, F., Rizzo, P. and Marzani, A., “Assessment of Bond State in Lap-shear Joints by Guided Wave Transmission Measurements,” Insight - Non-destructive Testing and Condition Monitoring, EURO Issue on NDT in the Aerospace Industry, 46(3), pp. 135-141, 2004. (invited)

86. Rizzo, P. and Lanza di Scalea, F., “Load Measurement and Health Monitoring in Cable Stays via Guided Wave Magnetostrictive Ultrasonics,” Materials Evaluation, 62(10), pp. 1057-1065, 2004.

87. Lanza di Scalea, F. and McNamara, J., “Measuring High-frequency Waves Propagating in Railroad Tracks by Joint Time-Frequency Analysis,” Journal of Sound and Vibration, 273(3), pp. 637-651, 2004.

88. Lanza di Scalea, F., Rizzo, P. and Seible, F., “Stress Measurement and Defect Detection in Steel Strands by Guided Stress Waves,” ASCE Journal of Materials in Civil Engineering, Special Issue on NDE/Health Monitoring, 15(3), pp. 219-227, 2003.

89. Lanza di Scalea, F. and McNamara, J., "Ultrasonic NDE of Railroad Tracks: Air-coupled Cross-sectional Inspection and Long-range Inspection," Insight - Non-destructive Testing and Condition Monitoring, EURO Issue on NDT in the Rail Industry, 45(6), pp. 394-401, 2003. (invited)

90. Rizzo, P. and Lanza di Scalea, F., “Effect of Frequency on the Acousto-elastic Response of Steel Bars,” Experimental Techniques, 27(6), pp. 40-43, 2003.

91. McNamara, J. and Lanza di Scalea, F., “Air-coupled Ultrasonic Testing of Railroad Rails,” Materials Evaluation, 60(12), pp. 1431-1437, 2002.

92. Rizzo, P. and Lanza di Scalea, F., “Acoustic Emission Monitoring of CFRP Bridge Stay Cables in Large-scale Testing,” Experimental Mechanics, 41(3), pp. 282-290, 2001.

93. Tuzzeo, D. and Lanza di Scalea, F., “Non-contact Air-coupled Ultrasonic Guided Waves for Detection of Thinning Defects in Aluminum Plates,” Research in Nondestructive Evaluation, 13(2), pp. 61-78, 2001.

94. Lanza di Scalea, F., Bonomo, M. and Tuzzeo, D., “Ultrasonic Guided Wave Inspection of Bonded Lap Joints: Noncontact Method and Photoelastic Visualization,” Research in Nondestructive Evaluation, 13(3), pp. 153-171, 2001.

95. Lanza di Scalea, F., Spicer, J.B. and Green, R.E., Jr., “Electronic Shearography with Thermal Loading for Detecting Debonds in Thick Polyurethane/Steel Panels for Marine Applications,” Research in Nondestructive Evaluation, 12(1), pp. 43-51, 2000.

96. Lanza di Scalea, F. and Green, R.E., Jr., “A Hybrid Non-contact Ultrasonic System for Sensing Bond Quality in Tow-placed Thermoplastic Composites,” Journal of Composite Materials, 34(21), pp. 1860-1880, 2000.

97. Lanza di Scalea, F., “Advances in Non-contact Ultrasonic Inspection of Railroad Tracks,” Experimental Techniques, 24(5), pp. 23-26, 2000.

98. Lanza di Scalea, F., Rizzo, P., Karbhari, V.M. and Seible, F., “Health Monitoring of I5/Gilman Advanced Technology Bridge,” Smart Materials Bulletin, 1(2), pp. 6-10, 2000.

99. Lanza di Scalea, F., Cappello, F. and Cloud, G.L., “On the Elastic Behavior of a Cross-Ply Composite Pin-Joint with Clearance Fits,” Journal of Thermoplastic Composite Materials, 12(1), pp. 13-22, 1999.

100. Lanza di Scalea, F., Cappello, F. and Cloud, G.L., “On the Effect of Interference Fits in Composite Pin-Joints,” Journal of Thermoplastic Composite Materials, 12(1), pp. 23-32, 1999.

101. Lanza di Scalea, F. and Green, R.E., Jr., “Experimental Observation of the Intrusive Effect of a Contact Transducer on Ultrasound Propagation,” Ultrasonics, 37(3), pp. 179-183, 1999.

102. Lanza di Scalea, F. and Green, R.E., Jr., “High-sensitivity Laser-based Ultrasonic C-scan System for Materials Inspection,” Experimental Mechanics, 39(4), pp. 329-334, 1999.

103. Lanza di Scalea, F., Berndt, T.P., Spicer, J.B. and Djordjevic, B.B., “Remote Laser Generation of Narrow-band Surface Waves Through Optical Fibers,” IEEE Transactions on Ultrasonics, Ferroelectrics and Frequency Control, 46(6), pp. 1551-1557, 1999.

104. Lanza di Scalea, F., “Strain in Isotropic Pin-Joints: Experimental and Numerical Analysis,”

26

Experimental Techniques, 22(4), pp. 25-28, 1998. 105. Lanza di Scalea, F., Soonsung, H. and Cloud, G.L., “Whole-Field Strain Measurements in Pin-

Loaded Plate by Electronic Speckle Pattern Interferometry and the Finite Element Method,” Experimental Mechanics, 38(1), pp. 55-60, 1998.

106. Lanza di Scalea, F., “Measurement of Thermal Expansion Coefficients of Composites using Strain Gages,” Experimental Mechanics, 38(4), pp. 233-241, 1998.

107. Lanza di Scalea, F., “Compensation of Thermal Output of Strain Gages on Orthotropic Materials: Case of One Compensating Gage for Multiple Active Ones,” Experimental Techniques, 22(6), pp. 30-34, 1998.

108. Lanza di Scalea, F., Cappello, F. and Cloud, G.L., “A Study on the Effects of Clearance and Interference Fits in a Pin-Loaded Cross-Ply FGRP Laminate,” Journal of Composite Materials, 32(8), pp. 783-803, 1998.

Research Technical Reports 1. Capriotti, M., Kim, H.E., Lanza di Scalea, F. and Kim, H., “Non-Destructive Evaluation Methods

for Detecting Major Damage in Internal Composite Structural Components,” Technical Report to the Federal Aviation Administration (FAA) for FAA Cooperative Agreement 12-C-AM-UCSD- amendment 10, DOT/FAA/AR-xx/xx, August 2017 (43 pages).

2. Coccia, S., Phillips, R., Bartoli, I., Salamone, S., Rizzo, P., Lanza di Scalea, F., “On-line High-speed Rail Defect Detection – Part II,” Federal Railroad Administration Technical Report DOT/FRA/ORD-12/02, March 2012 (140 pages).

3. Todd, M., Lanza di Scalea, F., Srivastava, A., Fasel, T., and Bartoli, I., “In-situ Adhesive Bond Assessment for Aerospace Structures,” Technical Report no. FA9550-07-1-0016 to the US Air Force Office of Scientific Research, University of California, San Diego, 2010 (97 pages).

4. Todd, M. and Lanza di Scalea, F., “Proof-of-concept Studies in Novel Guided Wave Methods for Metallic Structural Condition Assessment,” Final Report N00014-08-1-0973 to the Office of Naval Research, University of California San Diego (39 pages), 2009.

5. Bartoli, I., Salamone, S., Phillips, R., Nucera, C., and Lanza di Scalea, F., “Health Monitoring to Detect Failure of Prestressing (PS) Cables in Segmental Box-girder Bridges,” Technical Report No. CA-090938 to the California Department of Transportation, University of California, San Diego, 2009 (131 pages).

6. Lanza di Scalea, F., Bartoli, I., Coccia, S., Salamone, S., and Phillips, R., “Automated Measurement of Stress in Continuous Welded Rail (CWR),” Letter Report to the Federal Railroad Administration, University of California, San Diego, 2009 (22 pages).

7. Coccia, S., Bartoli, I., Phillips, R., Salamone, S. and Lanza di Scalea, F., “Noncontact Rail Defect Detection: Fourth Field Test,” Technical Report No. SSRP-09/04 to the Federal Railroad Administration, University of California, San Diego, 2009 (22 pages).

8. Nucera, C., Bartoli, I., Salamone, S., Phillips, R., and Lanza di Scalea, F., “Nonlinear Ultrasonics for Health Monitoring of Prestressing Tendons,” Letter Report to the California Department of Transportation, University of California, San Diego, 2008.

9. Coccia, S., Bartoli, I., Salamone, S. and Lanza di Scalea, F., “Report of Third Field Test of UCSD/FRA Rail Defect Detection Prototype, Gettysburg, PA, March 17-21, 2008,” Technical Report No. SSRP-08/02 to the Federal Railroad Administration, University of California, San Diego, 2008 (80 pages).

10. Coccia, S., Bartoli, I., Lanza di Scalea, F. and Rizzo, P., “Non-contact Rail Defect Detection: First and Second Field Tests,” Technical Report No. SSRP-07/15 to the Federal Railroad Administration, University of California, San Diego, 2007.

11. Bartoli, I., Sorrivi, E., Lanza di Scalea, F., and Phillips, R., “Health Monitoring of Prestressing Cables: Literature Review and Wave Propagation Results,” Technical Report No. SSRP-07/14 to the California Department of Transportation, University of California, San Diego, 2007.

12. Bartoli, I. and Lanza di Scalea, F., “Health Monitoring of Prestressing Cables: Literature Review and Initial Results,” Technical Report No. SSRP-06/24 to the California Department of Transportation, University of California, San Diego, 2006.

27

13. Rizzo, P., Coccia, S., Bartoli, I. and Lanza di Scalea, F., “On-line High-speed Rail Defect Detection – Phase IV: Prototype Assembling and Field Testing,” Technical Report No. SSRP-06/17 to the Federal Railroad Administration,, University of California, San Diego, 2006.

14. Rizzo, P., Coccia, S. and Lanza di Scalea, F., “On-line High-speed Rail Defect Detection – Phase III,” Technical Report No. SSRP-05/04 to the Federal Railroad Administration, University of California, San Diego, 2005.

15. Lanza di Scalea, F., Bartoli, I., Rizzo, P. and McNamara, J., “On-line High-speed Rail Defect Detection,” Technical Report DOT/FRA/ORD-04/16, Department of Transportation/Federal Railroad Administration, 2004.

16. Robinson, J. and Lanza di Scalea, F., “Bond Quality Assessment in Aerospace Components by Ultrasonic Non-destructive Testing,” Technical Report No. SSRP-2002/10, University of California, San Diego, 2002.

17. Rizzo, P., Lanza di Scalea, F., Karbhari, V.M. and Seible, F., “Acoustic Emission Monitoring of CFRP Stay Cables During Proof Testing,” Technical Report No. SSRP-2001/03, University of California, San Diego, 2001.

Refereed Conference Proceedings 1. Sternini, S., Quattrocchi, A., Montanini, R., Pau, A. and Lanza di Scalea, F., “A match coefficient

approach for damage imaging in structural components by ultrasonic synthetic aperture focus,” CD-ROM Proceedings of the Xth International Conference on Structural Dynamics, EURODYN 2017, Elsevier, Procedia Engineering, F. Vestroni, F. Romeo and V. Gattulli, eds., vol. 199, pp. 1-6, 2017.

2. Capriotti, M. , Kim, H. E., Lanza di Scalea, F., and Kim, H., “Detection of major impact damage to composite aerospace structures by ultrasonic guided waves and statistical signal processing,” CD-ROM Proceedings of the Xth International Conference on Structural Dynamics, EURODYN 2017, Elsevier, Procedia Engineering, F. Vestroni, F. Romeo and V. Gattulli, eds., vol. 199, pp. 1-6, 2017.

3. Mariani, S., Nguyen, T., Zhu, X., Sternini, S., Lanza di Scalea, F., and Fateh, M. and Wilson, R., “Non-contact ultrasonic guided wave inspection of rails: next generation approach,” Proceedings of the 2016 ASME Joint Rail Conference (JRC), Columbia, SC, April 12-15, 2016.

4. Zhu, X., Lanza di Scalea, F., and Fateh, M., “Thermal stress measurement in continuous welded rails using the hole-drilling method,” Proceedings of the 2016 ASME Joint Rail Conference (JRC), Columbia, SC, April 12-15, 2016.

5. Nguyen, T., Sternini, S., and Lanza di Scalea, F., “3D Ultrasonic Imaging Applications on Rails,” Proceedings of the 2016 ASME Joint Rail Conference (JRC), Columbia, SC, April 12-15, 2016.

6. Nguyen, T., Sternini, S. and Lanza di Scalea, F., “Advances in Ultrasonic Defect Detection and Imaging in Structures,” Proceedings CIMTEC 2016 – Symposium P, Perugia, Italy, June 2016.

7. Pau, A. and Lanza di Scalea, F., “Non-Destructive Evaluation of Prestress In Plates By Nonlinear Guided Waves,” Proceedings of the 9th International Conference on Structural Dynamics, EURODYN 2014, A. Cunha, E. Caetano, P. Ribeiro, G. Muller (eds.), Porto, Portugal, June 30-July 2, 2014.

8. Mariani, S., Nguyen, T., Lanza di Scalea, F. and Fateh, M., “High speed Non-contact Ultrasonic Guided Wave Inspections of Rails,” CD-ROM Proceedings of the 2014 ASME Joint Rail Conference, Colorado Springs, CO, pp. 1-6, April 2-4, 2014.

9. Phillips, R., Lanza di Scalea, F., Nucera, C., Rizzo, P., Al-Nazer, L., “Ultrasonic Tomography for Rail Flaw Imaging,” CD-ROM Proceedings of the 2014 ASME Joint Rail Conference, Colorado Springs, CO, pp. 1-10, April 2-4, 2014.

10. Phillips, R., Lanza di Scalea, F., Nucera, C., Fateh, M., and Choros, J., “Field Testing of Prototype Systems for the Non-destructive Measurement of the Neutral Temperature of Railroad Tracks,” CD-ROM Proceedings of the 2014 ASME Joint Rail Conference, Colorado Springs, CO, pp. 1-10, April 2-4, 2014.

11. Nucera, C. and Lanza di Scalea, F., “Modeling of Nonlinear Guided Waves And Applications To Structural Health Monitoring,” Computing in Civil Engineering, Proceedings of the 2013 ASCE

28

International Workshop on Computing in Civil Engineering (IWCCE), University of Southern California, Los Angeles, pp. 105-112, June 23-25, 2013.

12. Lanza di Scalea, F., Rizzo, P., Salamone, S., Bartoli, I. and Al-Nazer, L., “Ultrasonic Tomography for Three-Dimensional Imaging of Internal Rail Flaws: Proof-of-principle Numerical Simulations,” CD-ROM Proceedings of the 92th Annual Meeting of the Transportation Research Board, Washington DC, January 2013.

13. Nucera, C., Phillips, R., Lanza di Scalea, F., Fateh, M., and Carr, G., “RAIL-NT System for the In-situ Measurement of Neutral Temperature in CWR: Results from Laboratory and Field Tests,” CD-ROM Proceedings of the 92th Annual Meeting of the Transportation Research Board, Washington DC, January 2013.

14. Nguyen, T, Mariani, S., Phillips, R., Kijianka, P., Lanza di Scalea, F., and Staszewski, WJ, “Noncontact Ultrasonic Guided Wave Inspections Of Rails,” Proceedings of the 2013 ASME International Mechanical Engineering Congress and Exposition (IMECE 2013), pp. 1-9, San Diego, CA, November 15-21, 2013.

15. Manohar, A. and Lanza di Scalea, F., “Modeling Heat Flow Interaction With Defects In Composite Materials Using Virtual Heat Sources In Pulsed Thermography,” Proceedings of the 2013 ASME International Mechanical Engineering Congress and Exposition (IMECE 2013), San Diego, CA, November 15-21, 2013.

16. Nucera, C. and Lanza di Scalea, F., “Nonlinearity In Ultrasonic Guided Waves Propagating In Solids Under Constrained Thermal Expansion,” Proceedings of the 2013 ASME International Mechanical Engineering Congress and Exposition (IMECE 2013), pp. 1-8, San Diego, CA, November 15-21, 2013.

17. Tippmann J. and Lanza di Scalea, F., “Structural Health Monitoring Of Composite Wind Turbine Blades Using Coherent Guided Waves From Diffuse Fields,” Proceedings of the 2013 ASME International Mechanical Engineering Congress and Exposition (IMECE 2013), San Diego, CA, November 15-21, 2013.

18. Nucera, C., Phillips, R., Lanza di Scalea, F., Fateh, M., and Carr, G., “A Wayside System For In-Situ Measurement Of Rail Neutral Temperature By Nonlinear Ultrasonic Guided Waves,” Proceedings of the ASME 2012 RTD Fall Conference (RTDF 2012), Omaha, Nebraska, October 16-18, pp. 1-7, 2012.

19. Bazilevs, Y., Marsden, A.L., Lanza di Scalea, F., Majumdar, A., and Tatineni, M., “Toward A Computational Steering Framework For Large-Scale Composite Structures Based On Continually And Dynamically Injected Sensor Data,” Procedia Computer Science, International Conference on Computational Science (ICCS 2012), vol. 9, pp. 1149-1158, 2012.

20. Nucera, C., Phillips, R., Coccia, S., Lanza di Scalea, F., Fateh, M. and Carr, G., “A Wayside System Based on Ultrasonic Guided Waves For the Measurement of Neutral Temperature In CWR,” Proceedings of American Railway Engineering and Maintenance-of-Way Association (AREMA) Annual Conference, Chicago, IL, Sept 16-19, 2012.

21. Nucera, C., Phillips, R., Coccia, S., Lanza di Scalea, F., Fateh, M. and Carr, G., “Measurement of NT in CWR by Ultrasonic Guided Waves,” Proceedings of American Railway Engineering and Maintenance-of-Way Association (AREMA) Annual Conference, Minneapolis, MN, September 18-21, 2011.

22. Lanza di Scalea, F., Srivastava, A., Nucera, C., Bartoli, I., and Phillips, R., “Non-Linear Higher-Harmonic Generation Of Ultrasonic Guided Waves and Applications To Structural Diagnosis” Proceedings of the 7th European Nonlinear Dynamics Conference (ENOC 2011), Rome, Italy, July 24-29, 2011.

23. Phillips, R., Bartoli, I., Coccia, S., Lanza di Scalea, F., Salamone, S., Nucera, C., Fateh, M., and Carr, G., “Nonlinear Guided Waves in Continuous Welded Rails for Buckling Prediction,” Review of Progress in Quantitative Nondestructive Evaluation (QNDE), Vol. 30, San Diego, CA, July 18-23, pp. 314-321, 2011.

24. Coccia, S., Phillips, R., Nucera, C., Bartoli, I., Salamone, S., Lanza di Scalea, F., Fateh, M. and Carr, G., “Ultrasonic Guided-wave Defect Detection System for Rails,” Proceedings of American Railway Engineering and Maintenance-of-Way Association (AREMA) Annual Conference,

29

Minneapolis, MN, September 18-21, 2011. 25. Lanza di Scalea, F., Salamone, S., Bartoli, I., Kim, H., and Rhymer, J., “Location and

Identification of Impact Forces in Composite Aerospace Panels,” Proceedings of the 40th National Conference of the Italian Association for Stress Analysis (AIAS), Palermo, Italy, September 7-10, 2011.

26. Coccia, S., Phillips, R., Bartoli, I., Salamone, S., Lanza di Scalea, F., Fateh, M., and Carr, G., “UCSD/FRA Non-contact Ultrasonic Guided Wave System for Rail Inspection: An Update,” CD-ROM Proceedings of the 90th Annual Meeting of the Transportation Research Board, Washington, DC, January 2011.

27. Salamone, S., Bartoli, I., Phillips, R., Nucera, C., and Lanza di Scalea, F., “Health Monitoring of Prestressing Tendons in Post-Tensioned Concrete Bridges,” CD-ROM Proceedings of the 90th Annual Meeting of the Transportation Research Board, Washington, DC, January 2011.

28. Bartoli, I., Salamone, S., Lanza di Scalea, F., Rhymer, J. and Kim, H., “Impact Force Identification on Aerospace Panels,” Proceedings of the ASME International Mechanical Engineering Congress, Vancouver, Canada, November 12-18, 2010.

29. Salamone, S., Bartoli, I., Phillips, R., Nucera, C., Lanza di Scalea, F., Sikorsky, C. and Tamutus, T., “Health Monitoring of Prestressing Tendons in Post-tensioned Concrete Structures,” CD-ROM Proceedings of the ASNT Conference on NDE/NDT for Highways and Bridges: Structural Materials Technology, New York, NY, pp. 401-408, August 16-20, 2010.

30. Nucera, C., Salamone, S., Bartoli, I., Phillips, R., Lanza di Scalea, F. and Sikorsky, C., “Nonlinear Ultrasonic Guided Waves for Stress Monitoring in Prestressing Tendons for Post-tensioned Concrete Structures,” CD-ROM Proceedings of the ASNT Conference on NDE/NDT for Highways and Bridges: Structural Materials Technology, New York, NY, pp. 409-417, August 16-20, 2010.

31. Bartoli, I., Phillips, R., Coccia, S., Srivastava, A., Lanza di Scalea, F., Fateh, M. and Carr, G., “Stress Dependence of Ultrasonic Guided Waves in Rails,” CD-ROM Proceedings of the 89th Annual Meeting of the Transportation Research Board, Washington, DC, January 2010.

32. Coccia, S., Bartoli, I., Phillips, R., Salamone, S., Lanza di Scalea, F., Fateh, M., and Carr, G., “UCSD/FRA Ultrasonic guided-Wave System for Rail Inspection,” Proceedings of the American Railway Engineering and Maintenance-of-Way Association (AREMA) Annual Conference, Chicago, IL, September 20-23, 2009.

33. Coccia, S., Salamone, S., Phillips, R., Lanza di Scalea, F., and Fateh, M., “Non-contact Ultrasonic Guided Wave Detection of Rail Defects,” CD-ROM Proceedings of the 88th Annual Meeting of the Transportation Research Board, Washington, DC, January 11-15, 2009.

34. Marzani, A., Bocchini, P, Viola, I., Coccia, S., Salamone, S. and Lanza di Scalea, F., “A Software for the Computation of Acoustic Waves in Cylindrical, Plate and Arbitrary Cross-sections,” Proceedings of the AIPND Italian Congress, Rome, October 15-17, 2009.

35. Bartoli, I., Rizzo, P., Lanza di Scalea, F., Marzani, A., Sorrivi, E., and Viola, E., “Structural Health Monitoring of Strands in P/C Structures by Embedded Sensors and Ultrasonic Guided Waves,” Fracture Mechanics of Concrete and Concrete Structures Conference (Framcos), Carpinteri et al, eds., Catania, Italy, pp. 1029-1036, 2007.

36. Coccia, S., Bartoli, I., Lanza di Scalea, F., Rizzo, P., Fateh, M., and Yang, T-L., “Non-contact Ultrasonic Rail Flaw Detection,” session on “Transformative Applications of Smart Sensors Technology in Structural Health Monitoring,” Proceedings of World Forum on Smart Materials and Smart Structures Technologies (SMSST07), Chongqing and Nanjing, China, May 22-27, 2007. (invited)

37. Lanza di Scalea, F., Bartoli, I., Rizzo, P. and Fateh, M., “High-speed Defect Detection in Rails by Non-contact Guided Ultrasonic Testing,” CD-ROM Proceedings of the 84th Annual Meeting of the Transportation Research Board, Washington, DC, 2005.

38. Trivedi, A., Krysl, P., McNamara, J. and Lanza di Scalea, F., “Adaptive Simulation of Ultrasound Guided Waves in Railroad Tracks Using CHARMS,” CD-ROM Proceedings of the 6th World Congress on Computational Mechanics, Beijing, China, 2004.

39. Seible, F., Cicerone, S., Hose, Y., Brestel, D. and Lanza di Scalea, F., “The I-5/Gilman

30

Advanced Technology Cable Stayed Bridge,” IASS (International Association for Shell and Spatial Structures) International Symposium on Lightweight Structures in Civil Engineering, Warsaw, Poland, pp. 735-748, 2002.

40. Lanza di Scalea, F. and Green, R.E., Jr., “Advances in Non-contact Ultrasonic Systems for Materials Inspection,” Proceedings of the American Society of Mechanical Engineers 6th NDE Topical Conference, San Antonio, TX, ASME NDE-vol. 19, pp. 113-118, 1999.

41. Lanza di Scalea, F., Berndt, T.P., Djordjevic, B.B. and Green, R.E., Jr., "Advances in Optical Methods for Non-contact Nondestructive Evaluation," Proceedings of the 9th International Symposium on Nondestructive Characterization of Materials, Sydney, Australia, Nondestructive Characterization of Materials IX, R.E. Green, Jr., ed., pp. 149-155, 1999.

42. Cloud, G.L. and Lanza di Scalea, F., “Stress near Interference-Fit Composite Fasteners by Speckle Interferometry,” Post-Conference Proceedings of the 1997 Society for Experimental Mechanics (SEM) Spring Conference on Experimental Mechanics, pp. 39-45,1998.

43. Cloud, G.L. and Lanza di Scalea, F., “Strain Measurement by Digital Speckle Pattern Interferometry,” Post-Conference Proceedings of the 1997 Society for Experimental Mechanics (SEM) Spring Conference on Experimental Mechanics, pp.151-157, 1998.

44. Lanza di Scalea, F., Soonsung, H. and Cloud, G.L., “ESPI and FEM Analysis of Strain Field in Pin-Loaded Plate,” Proceedings of the 11th International Conference on Experimental Mechanics, Oxford, United Kingdom, pp. 703-708, 1998.

Other Conference Proceedings 45. Sternini, S., Nguyen, T., and Lanza di Scalea, F., “Ultrasonic tomography in solids using

adaptive beamforming,” CD-ROM Proceedings of SEM International Modal Analysis Conference (IMAC-XXXV), Society for Experimental Mechanics, Garden Grove, CA, January 30-February 2, 2017.

46. Capriotti, M., Sternini, S., and Lanza di Scalea, F., “Passive defect detection and imaging in structures by cross-correlations of infrared thermography measurements,” CD-ROM Proceedings of SEM International Modal Analysis Conference (IMAC-XXXV), Society for Experimental Mechanics, Garden Grove, CA, January 30-February 2, 2017.

47. Capriotti, M., Kim, H., Lanza di Scalea, F., and Kim, H., “Ultrasonic Nondestructive Inspection of Wide Area Impact Damage in Composite Aircraft Structures,” CD-ROM Proceedings of SEM International Modal Analysis Conference (IMAC-XXXV), Society for Experimental Mechanics, Garden Grove, CA, January 30-February 2, 2017.

48. Zhu, X. and Lanza di Scalea, F., “In-situ thermal stress estimation in structures using the electro-mechanical impedance method,” CD-ROM Proceedings of SEM International Modal Analysis Conference (IMAC-XXXV), Society for Experimental Mechanics, Garden Grove, CA, January 30-February 2, 2017.

49. Sternini, S., Liang, A., and Lanza di Scalea, F., “Ultrasonic Imaging of Structural Defects by Improved Synthetic Aperture Focus Techniques,” 2017 Conference and Exposition on Experimental and Applied Mechanics, Society for Experimental Mechanics, Indianapolis, ID, June 10-15, 2017.

50. Nucera, C., and Lanza di Scalea, F., “In-Situ Characterization of Thermal Stresses In Materials and Structures by Nonlinear Wave Propagation,” 2017 Conference and Exposition on Experimental and Applied Mechanics, Society for Experimental Mechanics, Indianapolis, ID, June 10-15, 2017.

51. Capriotti, M., Sternini, S., and Lanza di Scalea, F., “Passive Infrared Thermography for Defect Detection and Imaging in Structures by Correlation of Diffuse Thermal Fields,” 2017 Conference and Exposition on Experimental and Applied Mechanics, Society for Experimental Mechanics, Indianapolis, ID, June 10-15, 2017.

52. Liang, A., Capriotti, M., Sternini, S., Zhu, X., and Lanza di Scalea, F., “Passive-Only Extraction Of Acoustic Impulse Response By Deconvolutions Of Non-Stationary Excitations: Application To High-Speed Non-Contact Structural Inspection Of Railroad Tracks From Wheel-Generated

31

Excitations,” Abstract for Experimental Vibration Analysis for Civil Engineering Structures (EVACES2017), San Diego, CA, July 12-14, 2017.

53. Zhu, X., Lanza di Scalea, F. and Fateh, M., “Thermal stress characterization using the electromechanical impedance method,” Proceedings SPIE vol 10164, SPIE Smart Structures and NDE Conference, Portland, OR, 25-29 March, 2017.

54. Sternini, S., Quattrocchi, A., Montanini, R. and Lanza di Scalea, F., “Ultrasonic damage imaging of structural components with bulk and guided waves using match coefficients,” Proceedings SPIE vol 10170, SPIE Smart Structures and NDE Conference, Portland, OR, 25-29 March, 2017.

55. Capriotti, M., Kim, H., Lanza di Scalea, F., and Kim, H., “Development of an ultrasonic nondestructive Inspection method for impact damage detection in composite aircraft structures,” Proceedings SPIE vol 10169, SPIE Smart Structures and NDE Conference, Portland, OR, 25-29 March, 2017.

56. Lanza di Scalea F., “Damage location and identification in aerospace panels via piezoelectric rosettes,” CD-ROM Abstract Proceedings of the ASME IMECE International Mechanical Engineering Congress & Exposition, IMECE2016-66768, Phoenix, AZ, November 13-16, 2016.

57. Sternini, S., Nguyen T., and Lanza di Scalea, F., “Advances in damage imaging by ultrasonic synthetic aperture focusing,” CD-ROM Abstract Proceedings of the ASME IMECE International Mechanical Engineering Congress & Exposition, IMECE2016-66777, Phoenix, AZ, November 13-16, 2016.

58. Lanza di Scalea, F., Kim, H., Capriotti, M., Kim, H., and Mariani, S., “Detection of major internal damage in aerospace structures by ultrasonic guided waves,” CD-ROM Abstract Proceedings of the ASME IMECE International Mechanical Engineering Congress & Exposition, IMECE2016-66872Phoenix, AZ, November 13-16, 2016.

59. Mariani, S., Nguyen, T., Sternini, S., Lanza di Scalea, F., Fateh, M. and Wilson, R., “Defect detection performance of the UCSD non-contact air-coupled ultrasonic guided wave inspection of rails prototype,” Proceedings SPIE, Las Vegas, NV, March 2016.

60. Mariani, S., Nguyen, T., Sternini, S., Lanza di Scalea, F., Fateh, M. and Wilson, R., “Air-Coupled Ultrasonic Testing of Rails,” 25th ASNT Annual Research Symposium, New Orleans, LA April 11-14, 2016.

61. Sternini, S., Nguyen, T. and Lanza di Scalea, F., “Ultrasonic Imaging Using Global Matched Coefficients” Proceedings of 8th European Workshop on Structural Health Monitoring (EWSHM 2016), Bilbao, Spain, 5-8 July 2016.

62. Sternini, S., Nguyen, T. and Lanza di Scalea, F., “Ultrasonic imaging of structural defects using adaptive beamforming,” Proceedings of the ASME 2016 Conference on Smart Materials, Adaptive Structures and Intelligent Systems, SMASIS-2016, Stowe, VT, September 28-30, 2016.

63. Zhu, X., Lanza di Scalea, F. and Fateh, M., “On the study of the influences of temperature and axial load to the impedance-based structural health monitoring system,” 11th International Workshop on Advanced Materials and Smart Structures Technology, University of Illinois Urbana-Champaign, August 1-2, 2015.

64. Zhu, X., Lanza di Scalea, F. and Fateh, M., “On the study of the in-situ thermal stress measurement using a hole-drilling method,” 11th International Workshop on Advanced Materials and Smart Structures Technology, University of Illinois Urbana-Champaign, August 1-2, 2015.

65. Nguyen, T., Sternini, S. and Lanza di Scalea, F., “Advances in ultrasonic imaging of internal flaws in structures,” Proceedings of the 2015 Annual Conference of the Prognostics and Health Management Society, Coronado, CA, Oct 19-14, 2015.

66. Nguyen, T., Sternini, S. and Lanza di Scalea, F., “On Defect Imaging Using Ultrasonics for Structural Health Monitoring,” CD-ROM Proceedings of the 22nd International Congress on Sound and Vibration (ICSV22), Florence Italy. July 12-16, 2015.

67. Tippmann, J. and Lanza di Scalea, F., “Applications of Matched Field Processing to Damage Detection in Composite Wind Turbine Blades,” Health Monitoring of Structural and Biological Systems IX (SPIE Vol 9438), T. Kundu, ed., part of SPIE Smart Structures/NDE Symposium, San Diego, CA, pp. 94380H1-94380H7, March 8-12, 2015.

32

68. Mariani, S., Nguyen, T., Zhu, P., Lanza di Scalea, F. and Fateh, M., “Non-contact Ultrasonic Guided Wave Inspection of Rails: Field Test Results and Update,” Sensors and Smart Structures Technologies for Civil, Mechanical and Aerospace Systems (SPIE Vol 9435), J.P. Lynch, C-B. Yun, K-W. Wang, eds., part of SPIE Smart Structures/NDE Symposium, San Diego, CA, pp. 86921L1-86921L12, March 8-12, 2015.

69. Kim, H., Lanza di Scalea, F., Kim, E.H., Capriotti, M. and Nguyen, T., “Non-Destructive Evaluation Methods for Detecting Major Damage in Internal Composite Structural Components,” FAA Joint Advanced Materials and Structures 2015 Technical Review Meeting, Baltimore, MD, March 31 - April 1, 2015.

70. Kijanka, P., Packo, P., Zhu, X., Staszewski, W. and Lanza di Scalea, F., “Three-Dimensional Temperature Effect Modelling of Piezoceramic Transducers Used for Structural Health Monitoring,” Proceedings of 5th Asia-Pacific Workshop on Structural Health Monitoring (AWPSHM 2014), Shenzhen, China, December 4-5, 2014.

71. Tippmann, J. and Lanza di Scalea, F., “Structural Health Monitoring of Composite Wind Turbine Blades Using Diffuse Ultrasonic Fields and Reciprocity,” Proceedings of the American Society for Composites 29th Technical Conference and 16th US-Japan Conference on Composite Materials, San Diego, CA, Sept 8-10, pp. 1-11, 2014.

72. Kijanka, P., Manohar, A., Lanza di Scalea, F. and Staszewski, W., “Damage Location By Ultrasonic Lamb Waves And Piezoelectric Rosettes,” Proceedings of SPIE (International Society for Optical Engineering) Smart Structures/NDE Annual International Symposium - Health Monitoring of Structural and Biological Systems, T. Kundu, ed., San Diego, CA, March 9-13, Vol. 9064, pp. 9064221 – 90642213, 2014.

73. Zhu, P., Lanza di Scalea, F. and Fateh, M., “Temperature And Axial Stress Effects In Electro-Mechanical Impedance Method-Based Structural Health Monitoring,” Proceedings of SPIE (International Society for Optical Engineering) Smart Structures/NDE Annual International Symposium - Health Monitoring of Structural and Biological Systems, T. Kundu, ed., San Diego, CA, March 9-13, Vol. 9064, pp 90641O1-90641O12, 2014.

74. Phillips, R., Lanza di Scalea, F., Nucera, C., Fateh, M., and Choros, J., “Field Testing Of Prototype Systems For The Non-Destructive Measurement Of The Neutral Temperature Of Railroad Tracks,” Proceedings of SPIE (International Society for Optical Engineering) Smart Structures/NDE Annual International Symposium - Sensors and Smart Structures Technologies for Civil, Mechanical, and Aerospace Systems, J. P. Lynch, K-W. Wang, H. Sohn, eds., San Diego, CA, March 9-13, Vol. 9061, pp. 90610J1 - 90610J12, 2014.

75. Nguyen, T., Mariani, S., Phillips, R., Kijanka, P., Lanza di Scalea, F., Staszewski, W., and Fateh, M., “Non-Contact High Speed Ultrasonic Guided Wave Inspections Of Rails,” Proceedings of SPIE (International Society for Optical Engineering) Smart Structures/NDE Annual International Symposium - Health Monitoring of Structural and Biological Systems, T. Kundu, ed., San Diego, CA, March 9-13, Vol. 9064, pp. 90640V1 - 90640V12, 2014.

76. Tippmann, J. and Lanza di Scalea, F., “Experiments On A Wind Turbine Blade Testing An Indication For Damage Using The Causal And Anti-Causal Green’s Function Reconstructed From A Diffuse Field,” Proceedings of SPIE (International Society for Optical Engineering) Smart Structures/NDE Annual International Symposium - Health Monitoring of Structural and Biological Systems, T. Kundu, ed., San Diego, CA, March 9-13, Vol. 9064, pp. 90641I 1 - 90641I 7, 2014.

77. Tippmann, J., Zhu, X. and Lanza di Scalea, F., “Probabilistic Structural Health Monitoring Using Passive-Only Damage Detection by Reciprocity of Green’s Functions Reconstructed from Diffuse Acoustic Fields,” CD-ROM Proceedings of the 7th European Workshop on Structural Health Monitoring, (EWSHM 2014), Nantes, France, July 8-11, pp. 1-8, 2014.

78. Nucera, C. and Lanza di Scalea, F., “Nonlinear Ultrasonic Waves for Structural Health Monitoring,” CD-ROM Proceedings of the 7th European Workshop on Structural Health Monitoring, (EWSHM 2014), Nantes, France, July 8-11, pp. 1-8, 2014.

79. Mariani, S., Nguyen, T., Phillips, R., Kijanka, P., Lanza di Scalea, F., and Staszewski, W., “Non-Contact Ultrasonic Guided Wave Inspection Of Rails,” Proceedings of SPIE (International Society for Optical Engineering) Smart Structures/NDE Annual International Symposium -

33

Sensors and Smart Structures Technologies for Civil, Mechanical, and Aerospace Systems, P. Lynch, C-B. Yun, K-W Wang, eds., San Diego, CA, March 10-14, Vol. 8692, pp. 86921L1-86921L12, 2013.

80. Manohar, A. and Lanza di Scalea, F., “Estimation of Defect Parameters in Quasi-Isotropic Composite Materials using Infrared Thermography,” Proceedings of SPIE (International Society for Optical Engineering) Smart Structures/NDE Annual International Symposium - Sensors and Smart Structures Technologies for Civil, Mechanical, and Aerospace Systems, P. Lynch, C-B. Yun, K-W Wang, eds., San Diego, CA, March 10-14, Vol. 8692, pp. 86922I1-86922I113, 2013.

81. Zhu, X., Phillips, R. and Lanza di Scalea, F., “Axial Stress Determination Using Impedance-Based Method And Its Application On The Thermal Stresses Measurement In Continuous Welded Rail,” Proceedings of SPIE (International Society for Optical Engineering) Smart Structures/NDE Annual International Symposium - Health Monitoring of Structural and Biological Systems VII, T. Kundu, ed., San Diego, CA, March 10-14, Vol. 8695, pp. 86951N1- 86951N8, 2013.

82. Nucera, C. and Lanza di Scalea, F., “Nonlinear Guided Waves in Solids under Constrained Thermal Expansion,” Proceedings of SPIE (International Society for Optical Engineering) Smart Structures/NDE Annual International Symposium - Health Monitoring of Structural and Biological Systems VII, T. Kundu, ed., San Diego, CA, March 10-14, Vol. 8695, pp. 86950P1-86950P10, 2013.

83. Tippmann, J. and Lanza di Scalea, F., “Vibration control experiments using piezoelectric transducers on a wind turbine blade at UC San Diego,” Proceedings of SPIE (International Society for Optical Engineering) Smart Structures/NDE Annual International Symposium - Sensors and Smart Structures Technologies for Civil, Mechanical, and Aerospace Systems, P. Lynch, C-B. Yun, K-W Wang, eds., San Diego, CA, March 10-14, Vol. 8692, pp. 86921H1-86921H8, 2013.

84. Nucera, C., Phillips, R., Zhu, X., Mariani, S., Lanza di Scalea, F., Fateh, M. and Carr, G., “Nonlinear Guided Waves For Neutral Temperature Measurement In Continuous Welded Rails: Results From Laboratory And Field Tests,” Proceedings of SPIE (International Society for Optical Engineering) Smart Structures/NDE Annual International Symposium - Health Monitoring of Structural and Biological Systems VII, T. Kundu, ed., San Diego, CA, March 10-14, Vol. 8695, pp. 8695281-86952812, 2013.

85. Manohar, A. and Lanza di Scalea, F., “Defect Detection and Size Estimation in Composite Materials Using Infrared Thermography,” Proceedings of the SEM 2013 Annual Conference & Exposition on Experimental and Applied Mechanics, Lombard, IL, June 3-5, 2013.

86. Nucera, C. and Lanza di Scalea, F., “Ultrasonic Nonlinear Guided Waves and Applications to Structural Health Monitoring,” Proceedings of the SEM 2013 Annual Conference & Exposition on Experimental and Applied Mechanics, Lombard, IL, June 3-5, 2013.

87. Nucera, C. and Lanza di Scalea, F., “Modeling Of Nonlinear Guided Waves And Applications To Structural Health Monitoring,” Proceedings of the 2013 ASCE International Workshop on Computing in Civil Engineering (IWCCE), University of Southern California, June 23-25, 2013.

88. Nucera, C. and Lanza di Scalea, F., “Nonlinear Guided Waves for Thermal Stress Measurement in Constrained Solids,” Structural Health Monitoring 2013 – A Roadmap to Intelligent Structures - Proceeding of the 9th Intl Workshop on Structural Health Monitoring, F-K. Chang, ed., Stanford University, pp. 972-979, Sept. 10-12, 2013.

89. Tippmann, J. and Lanza di Scalea, F., “Using Diffuse Fields For Monitoring The Structural Health Of Wind Turbine Blades,” Structural Health Monitoring 2013 – A Roadmap to Intelligent Structures - Proceeding of the 9th Intl Workshop on Structural Health Monitoring, F-K. Chang, ed., Stanford University, pp. 2369-2375, Sept. 10-12, 2013.

90. Mariani, S., Nguyen, T., Phillips, R., Kijanka, P, Lanza di Scalea, F. and Staszewski, W., “Non-Contact Ultrasonic Guided Wave Inspection Of Rails,” Structural Health Monitoring 2013 – A Roadmap to Intelligent Structures - Proceeding of the 9th Intl Workshop on Structural Health Monitoring, F-K. Chang, ed., Stanford University, pp. 2570-2577, Sept. 10-12, 2013. (BEST PAPER AWARD).

34

91. Nucera, C., White, S., Kim, H., and Lanza di Scalea, F., “Piezoelectric Rosettes For Acoustic Source Location In Composite Structures: Results From “Blunt” Impact Tests,” Structural Health Monitoring 2013 – A Roadmap to Intelligent Structures - Proceeding of the 9th Intl Workshop on Structural Health Monitoring, F-K. Chang, ed., Stanford University, pp. 2635-2642, Sept. 10-12, 2013.

92. Nucera, C. and Lanza di Scalea, F., “Modeling Of Nonlinear Guided Waves And Applications To Structural Health Monitoring,” Proceedings of the 164th Meeting of the Acoustical Society of America, Special Session on Ultrasonic Guided Waves for Nondestructive Evaluation and Structural Health Monitoring, organized by Prof. Kundu, Kansas City, Missouri, October 22-26, 2012. (INVITED PRESENTATION)

93. Lanza di Scalea, F., Kim, H., Chen, Zhi, Salamone, S., and Bartoli, I., “Impact Monitoring In Aerospace Panels Via Piezoelectric Rosettes,” Proceedings of the SEM XII International Congress and Exposition, Costa Mesa, CA, June 11-14, 2012.

94. Nucera, C., and Lanza di Scalea, F., “Nonlinear Guided Waves For Structural Health Monitoring – Numerical Algorithm And Application To Railroad Tracks,” Proceedings of the ASME Conference on Smart Materials, Adaptive Structures and Intelligent Systems (SMASIS 2012), Stone Mountain, Georgia, September 19-21, 2012.

95. Manohar, A., Tippmann, J., and Lanza di Scalea, F., “Localization Of Defects In Wind Turbine Blades And Depth Estimation Using Infrared Thermography,” Proceedings of SPIE (International Society for Optical Engineering) Smart Structures/NDE Annual International Symposium - Sensors and Smart Structures Technologies for Civil, Mechanical, and Aerospace Systems, M. Tomizuka, ed., San Diego, CA, March 11-15, Vol. 8345, 2012.

96. Tippmann, J., Manohar, A., and Lanza di Scalea, F., “Wind Turbine Blade Inspection Tests At UCSD”, Proceedings of SPIE (International Society for Optical Engineering) Smart Structures/NDE Annual International Symposium - Sensors and Smart Structures Technologies for Civil, Mechanical, and Aerospace Systems, M. Tomizuka, ed., San Diego, CA, March 11-15, Vol. 8345, 2012.

97. Nucera, C., Lanza di Scalea, F., Fateh, M., and Carr, G., “Theoretical Considerations And Applications Of Nonlinear Guided Waves For Nondestructive Assessment Of Structures – A Railroad Track Case-Study,” CD-ROM Proceedings of ASME Joint Rail Conference (JRC 2012), Philadelphia, PA, April 17-19, pp. 1-7, 2012.

98. Pau, A., Lanza di Scalea, F., and Capecchi, D., “Nonlinear Elastic Waves In Solids Under Thermal Variation,” Proceedings of the 20th AIMETA (Assiciazione Italiana Meccanica Teorica e Applicata) Conference, Bologna, Italy, September 12-15, 2011.

99. Lanza di Scalea, F., Salamone, S., Bartoli, I., Kim, H., and Rhymer, J., “Location And Identification Of Impact Forces In Composite Aerospace Panels,” Proceedings of the 40th National Conference of the Italian Society for Stress Analysis (AIAS), Palermo, Italy. September 7-10, 2011.

100. Nucera, C. and Lanza di Scalea, F., “Nonlinear Guided Waves: Theoretical Considerations and Applications to Thermal Stress Measurement in Continuous Welded Rail,” Proceedings of 8th International Workshop on Structural Health Monitoring, F-K. Chang, ed., Stanford University, September 9-1, 2011.

101. Bartoli, I., Salamone, S., Lanza di Scalea, F., Rhymer, J. and Kim, H., “Impact Force Identification in Aerospace Panels by an Inverse Ultrasonic Guided Wave Problem,” Proceedings of SPIE (International Society for Optical Engineering) Smart Structures/NDE Annual International Symposium – Health Monitoring of Structural and Biological Systems V – T. Kundu, ed., San Diego, CA, Vol. 7984, pp. 79841F1-11, 2011.

102. Nucera, C. and Lanza di Scalea, F., “Nonlinear Ultrasonic Guided Waves for Prestress Level Monitoring in Prestressing Strands for Post-tensioned Concrete Structures,” Proceedings of SPIE (International Society for Optical Engineering) Smart Structures/NDE Annual International Symposium – Sensors and Smart Structures Technologies for Civil, Mechanical and Aerospace Systems, M. Tomizuka, C.B. Yun, V. Giurgiutiu, J. Lynch, eds., San Diego, CA, Vol. 7981, pp. 79810L1-14, 2011.

35

103. Salamone, S., Bartoli, I., Rhymer, J., Lanza di Scalea, F., and Kim, H., “Validation of the Piezoelectric Rosette Technique for Locating Impacts in Complex Aerospace Panels,” Proceedings of SPIE (International Society for Optical Engineering) Smart Structures/NDE Annual International Symposium – Health Monitoring of Structural and Biological Systems V – T. Kundu, ed., San Diego, CA, Vol. 7984, pp. 79841E1-11, 2011.

104. Coccia, S., Phillips, R., Nucera, C., Bartoli, I., Salamone, S., Lanza di Scalea, F., Fateh, M. and Carr, G., “UCSD/FRA Non-contact Ultrasonic Guided-wave System for Rail Inspection: An Update,” Proceedings of SPIE (International Society for Optical Engineering) Smart Structures/NDE Annual International Symposium – Sensors and Smart Structures Technologies for Civil, Mechanical and Aerospace Systems, M. Tomizuka, C.B. Yun, V. Giurgiutiu, J. Lynch, eds., San Diego, CA, Vol. 7981, pp. 7981131-8, 2011.

105. Phillips, R., Nucera, C., Coccia, S., Bartoli, I., Fateh, M. and Carr, G., “Monitoring Thermal Stresses and Incipient Buckling in Continuous-Welded Rail: Results from the UCSD/FRA/BNSF Large-scale Laboratory Test Track,” Proceedings of SPIE (International Society for Optical Engineering) Smart Structures/NDE Annual International Symposium – Sensors and Smart Structures Technologies for Civil, Mechanical and Aerospace Systems , M. Tomizuka, C.B. Yun, V. Giurgiutiu, J. Lynch, eds., San Diego, CA, Vol. 7981, pp. 79813T1-6, 2011.

106. Salamone, S., Bartoli, I., Nucera, C., Phillips, R. and Lanza di Scalea, F., “Health Monitoring of Prestressing Tendons in Post-tensioned Concrete Structures,” Proceedings of SPIE (International Society for Optical Engineering) Smart Structures/NDE Annual International Symposium – Sensors and Smart Structures Technologies for Civil, Mechanical and Aerospace Systems, M. Tomizuka, C.B. Yun, V. Giurgiutiu, J. Lynch, eds., San Diego, CA, Vol. 7981, pp. 7981221-10, 2011.

107. Manohar, A. and Lanza di Scalea, F., “Automated Detection and Quantification of Impact Damage in Composite Structures using Pulsed Thermography,” Proceedings of SPIE (International Society for Optical Engineering) Smart Structures/NDE Annual International Symposium – Sensors and Smart Structures Technologies for Civil, Mechanical and Aerospace Systems, M. Tomizuka, C.B. Yun, V. Giurgiutiu, J. Lynch, eds., San Diego, CA, Vol. 7981, pp. 79810V1-15, 2011.

108. Salamone, S., Bartoli, I., Phillips, R., Nucera, C., Srivastava, A., Lanza di Scalea, F., and Sikorsky, C., “Stress Monitoring by Ultrasonic Guided Waves in Prestressing Tendons for Post-tensioned Concrete Structures,” Proceedings of the 5th European Workshop on Structural Health Monitoring, F. Casciati and M. Giordano, eds., Sorrento, Italy, pp. 258-263, June 28 - July 4, 2010.

109. Bartoli, I., Phillips, R., Coccia, S., Lanza di Scalea, F., Salamone, S., Marzani, A., Fateh, M. and Carr, G., “Ultrasonic Guided Waves in Continuously Welded Rails for Buckling Prediction,” Proceedings of the 5th European Workshop on Structural Health Monitoring, F. Casciati and M. Giordano, eds., Sorrento, Italy, pp. 1235-1240, June 28 - July 4, 2010.

110. Nucera, C., Salamone, S., Bartoli, I., Phillips, R., Lanza di Scalea, F., and Sikorsky, C., “Nonlinear Ultrasonic Guided Waves for Stress Monitoring in Prestressing Tendons for Post-tensioned Concrete Structures,” Proceedings of the ASNT Conference on NDE/NDT for Highways and Bridges: Structural Materials Technology, New York, pp. 409-417, August 16-20, 2010.

111. Salamone, S., Bartoli, I., Phillips, R., Nucera, C, Lanza di Scalea, F., Sikorsky, C. and Tamutus, T., “Health Monitoring of Prestressing Tendons in Post-tensioned Concrete Structures,” Proceedings of the ASNT Conference on NDE/NDT for Highways and Bridges: Structural Materials Technology, New York, pp. 401-408, August 16-20, 2010.

112. Bartoli, I., Coccia, S., Phillips, R., Srivastava, A., Lanza di Scalea, F., Salamone, S., Fateh, M. and Carr, G., “Stress Dependence of Guided Waves in Rails,” Proceedings of SPIE (International Society for Optical Engineering) Smart Structures/NDE 17th Annual International Symposium – Health Monitoring of Structural and Biological Systems, San Diego, CA, Vol. 7650, pp. 765021-1-10, March 2010.

36

113. Bartoli, I., Salamone, S., Lanza di Scalea, F., Rhymer, J., and Kim, H., “Impact Force Identification On Aerospace Panels,” Proceedings of ASME International Mechanical Engineering Congress, Vancouver, British Columbia, November 12-18, 2010.

114. Manohar, A. and Lanza di Scalea, F., “Object Identification by Multispectral Fusion and Harr Classification,” Proceedings of SPIE (International Society for Optical Engineering) Smart Structures/NDE 17th Annual International Symposium – Sensors and Smart Structures Technologies for Civil, Mechanical and Aerospace Systems, San Diego, CA, Vol. 7647, pp. 76471Q-1-7, March 2010.

115. Bartoli, I., Salamone, S., Mezzanotte, M., Lanza di Scalea, F., Rhymer, J. and Kim, H., “Impact Force Identification on Isotropic and Anistropic Panels,” Proceedings of SPIE (International Society for Optical Engineering) Smart Structures/NDE 17th Annual International Symposium – Health Monitoring of Structural and Biological Systems, San Diego, CA, Vol. 7650, pp. 765007-1-12, March 2010.

116. Bartoli, I., Nucera, C., Phillips, R., Salamone, S., Srivastava, A., Lanza di Scalea, F., Coccia, S., and Sikorsky, C., ““Stress Monitoring in Prestressing Tendons for Post-tensioned Concrete Structures by Nonlinear Ultrasonic Guided Waves,” Proceedings of 7th International Workshop on Structural Health Monitoring, F-K. Chang, ed., Stanford University, September 9-11, pp. 2115-2122, 2009.

117. Coccia, S., Phillips, R., Bartoli, I., Salamone, S., Lanza di Scalea, F., Fateh, M. and Carr, G., “Ultrasonic Guided Wave Detection of Rail defects: Prototype Development and Field Testing for the Federal Railroad Administration,” Proceedings of 7th International Workshop on Structural Health Monitoring, F-K. Chang, ed., Stanford University, September 9-11, pp. 255-262, 2009.

118. Srivastava, A., Bartoli, I., Salamone, S. and Lanza di Scalea, F., “Behavior of Nonlinear Higher Harmonics in Plate and Rod Guided Waves,” Proceedings of 7th International Workshop on Structural Health Monitoring, F-K. Chang, ed., Stanford University, September 9-11, pp. 1832-1839, 2009.

119. Bartoli, I., Salamone, S., Di Leo, P., Mezzanotte, M., Lanza di Scalea, F., Rhymer, J., Phillips, R., Ajovalasit, A. and D’Acquisto, L., “Impact Force Identification and Location on Isotropic and Composite Panels,” Proceedings of 7th International Workshop on Structural Health Monitoring, F-K. Chang, ed., Stanford University, September 9-11, pp. 1902-1909, 2009.

120. Manohar, A. and Lanza di Scalea, F., “Object Identification by Multispectral Fusion and Haar Classification,” Proceedings of the 5th International Workshop on Advanced Smart Materials and Smart Structures technology (ANCRiSST), Boston, MA, July 29 – August 1, 2009.

121. Coccia, S., Bartoli, I., Phillips, R., Lanza di Scalea, F., Fateh, M. and Carr, G., “Non-contact Ultrasonic Detection of Rail Defects,” Proceedings of the Transportation Research Board (TRB) 11th Joint Light Rail Conference, Los Angeles, CA, April 19-22, 2009.

122. Lanza di Scalea, F. and Manohar, A., “Object Identification by Multispectral Fusion and Haar Classification,” Proceedings of the NSF Civil, Mechanical, and Manufacturing Innovation (CMMI) Engineering Research and Innovation Conference, Honolulu, Hawaii, June 22-25, 2009.

123. Coccia, S., Bartoli, I., Lanza di Scalea, F., and Fateh, M., “Modeling High-frequency Wave Propagation in Rail Tracks for Crack Detection,” Proceedings of SPIE (International Society for Optical Engineering) Smart Structures/NDE 16th Annual International Symposium - Sensors and Smart Structures Technologies for Civil, Mechanical and Aerospace Systems, M. Tomizuka, ed., San Diego, CA, Vol. 7292, pp. 7292671-72926712, 2009.

124. Marzani, A., Bocchini, P., Viola, E., Bartoli, I., Coccia, S., Salamone, S. and Lanza di Scalea, F., “A Software for the Computation of Acoustic Waves in Cylindrical, Plate and Arbitrary Cross-section Waveguides,” Proceedings of Italian Congress AIPND, Rome, 15-17 October 15-17, 2009.

125. Bartoli, I., Nucera, C., Srivastava, A., Salamone, S., Phillips, R., Lanza di Scalea, F., Coccia, S. and Sikorsky, C., “Nonlinear Ultrasonic Guided Waves for Stress Monitoring in Prestressing Tendons for Post-tensioned Concrete Structures,” Proceedings of SPIE (International Society for Optical Engineering) Smart Structures/NDE 16th Annual International Symposium - Sensors and Smart Structures Technologies for Civil, Mechanical and Aerospace Systems, M. Tomizuka, ed.,

37

San Diego, CA, Vol. 7292, pp. 7292711-72927112, 2009. 126. Srivastava, A. and Lanza di Scalea, F., “On the Existence of Antisymmetric or Symmetric

Lamb Waves at Nonlinear Higher Harmonics,” Proceedings of SPIE (International Society for Optical Engineering) Smart Structures/NDE 16th Annual International Symposium – Health Monitoring of Structural and Biological Systems, T. Kundu, ed., San Diego, CA, Vol. 7295, pp. 7295191-72951912, 2009.

127. Salamone, S., Lanza di Scalea, F. and Bartoli, I., “Temperature Effects in Lamb-wave Structural Health Monitoring Systems,” Proceedings of SPIE (International Society for Optical Engineering) Smart Structures/NDE 16th Annual International Symposium – Health Monitoring of Structural and Biological Systems, T. Kundu, ed., San Diego, CA, Vol. 7295, pp. 72950O1-72950O12, 2009.

128. Lanza di Scalea, F., Bartoli, I., Salamone, S., Phillips, R., and Sikorsky, C., “Monitoring Prestress Level in Seven-wire Prestressing Tendons by Inter-wire Ultrasonic Wave Propagation,” Proceedings of 3rd International Conference on Smart Materials, Structures, and Systems (CIMTEC), Catania, Italy, June 8-13, 2008.

129. Srivastava, A. and Lanza di Scalea, F., “Quantitative Detection of Bond Defects in Composite Aircraft Panels by Global-Local Ultrasonic Method,” Proceedings of SAMPE Technical Conference on Materials and Process Innovation: Changing Our World, Long Beach, California, May 18-22, 2008.

130. Bartoli, I., Phillips, R., Lanza di Scalea, F., Salamone, S., Coccia, S, and Sikorsky, C., “Load Monitoring in Multi-wire Strands by Interwire Ultrasonic Measurements,” Proceedings of SPIE (International Society for Optical Engineering) Smart Structures and Materials and NDE for Health Monitoring and Diagnostics – Sensors and Smart Structures Technologies for Civil, Mechanical and Aerospace Structures, M. Tomizuka, ed., San Diego, California, Vol. 6932, pp. 6932091-69320912, 2008.

131. Sabra, K., Srivastava, A., Duroux, A., Lanza di Scalea, F., and Bartoli, I., “Passive-only Wave-based Structural Health Monitoring from Ambient Noise,” Proceedings of SPIE (International Society for Optical Engineering) Smart Structures and Materials and NDE for Health Monitoring and Diagnostics – Health Monitoring of Structural and Biological Systems II, T. Kundu, ed., San Diego, California, Vol. 6935, pp. 6935081-6935087, 2008.

132. Srivastava, A., Bartoli, I., Coccia, S. And Lanza di Scalea, F., “Wave Propagation Models for Quantitative Defect Deetection by Ultrasonic Methods,” Proceedings of SPIE (International Society for Optical Engineering) Smart Structures and Materials and NDE for Health Monitoring and Diagnostics – Health Monitoring of Structural and Biological Systems II, T. Kundu, ed., San Diego, California, Vol. 6935, pp. 69350S1-69350S11, 2008.

133. Srivastava, A., Bartoli, I., and Lanza di Scalea, F., “Global-Local Modeling of Guided Waves for Quantitative Damage Detection,” Proceedings of the XXVI International Modal Analysis Conference (IMAC), Society for Experimental Mechanics, Orlando, FL, February 1-3, 2008.

134. Sabra, K., Srivastava, A., Bartoli, I., and Lanza di Scalea, F., “Structural Health Monitoring from Random Noise,” Proceedings of the XXVI International Modal Analysis Conference (IMAC), Society for Experimental Mechanics, Orlando, FL, February 1-3, 2008.

135. Bartoli, I., Lanza di Scalea, F., Phillips, R., Sorrivi, E. And Sikorsky, C., “Health Monitoring of Prestressing Tendons by Ultrasonic Waves and Embedded Sensors,” Proceedings of 6th International Workshop on Structural Health Monitoring: Quantification, Validation and Implementation,F-K. Chang, ed., Stanford University, September 11-13, pp. 476-482, 2007.

136. Srivastava, A., Bartoli, I., Lanza di Scalea, F., and Sabra, K., “Global-local Ultrasonic Method Applied to the Quantitative Detection of Defects in Aircraft Panels,” Proceedings of 6th International Workshop on Structural Health Monitoring: Quantification, Validation and Implementation, F-K. Chang, ed., Stanford University, September 11-13, pp. 1604-1611, 2007.

137. Coccia, S., Bartoli, I., Lanza di Scalea, F., Rizzo, P., and Fateh, M., “Non-contact Ulrasonic Rail Deefect Detection System: Prototype Development and Field Testing,” Proceedings of 6th International Workshop on Structural Health Monitoring: Quantification, Validation and Implementation, F-K. Chang, ed., Stanford University, September 11-13, pp. 1223-1230, 2007.

38

138. Sabra, K., Srivastava, A., and Lanza di Scalea, F., “Structural Health Monitoring by Extraction of Coherent Guided Waves from Ambient Noise,” Proceedings of 6th International Workshop on Structural Health Monitoring: Quantification, Validation and Implementation, F-K. Chang, ed., Stanford University, September 11-13, pp. 1637-1644, 2007.

139. Rizzo, P., Coccia, S., Lanza di Scalea, F., Bartoli, I. and Fateh, M., “Non-contact Rail Flaw Detection System: First Field Test,” Proceedings of SPIE (International Society for Optical Engineering) Smart Structures and Materials and NDE for Health Monitoring and Diagnostics – Sensors and Smart Structures Technologies for Civil, Mechanical and Aerospace Systems, San Diego, California, Vol. 6529, pp. 65293W1- 65293W11, 2007.

140. Matt, H. and Lanza di Scalea, F., “Macro-fiber Composite Piezoelectric Rosettes for Acoustic Source Location in Complex Structures,” Proceedings of SPIE (International Society for Optical Engineering) Smart Structures and Materials and NDE for Health Monitoring and Diagnostics – Sensors and Smart Structures Technologies for Civil, Mechanical and Aerospace Systems, San Diego, California, Vol. 6529, pp. 65290Q1-65290Q12, 2007.

141. Matt, H. and Lanza di Scalea, F., “Macro-fiber Composite Piezoelectric Rosettes for Acoustic Source Location in Complex Structures,” Proceedings of SPIE (International Society for Optical Engineering) Smart Structures and Materials and NDE for Health Monitoring and Diagnostics – Sensors and Smart Structures Technologies for Civil, Mechanical and Aerospace Systems, San Diego, California, Vol. 6529, pp. 65290Q1-65290Q12, 2007.

142. Bartoli, I., Marzani,A., Lanza di Scalea, F., Rizzo, P., Viola, E., Sorrivi, E., and Phillips, R. “SAFE Modeling of Waves for the Structural Health Monitoring of Prestressing Tendons,” Proceedings of SPIE (International Society for Optical Engineering) Smart Structures and Materials and NDE for Health Monitoring and Diagnostics – Health Monitoring of Structural and Biological Systems, San Diego, California, Vol. 6532, pp. 65320D1-65320D12, 2007.

143. Lanza di Scalea, F., Rizzo, P., Coccia, S., Bartoli, I., and Fateh, M. “Development of a Non-contact Defect Detection System for Railroad Tracks for the US Federal Railroad Administration,” Proceedings of 3rd European Workshop on Structural Health Monitoring, A. Guemes, ed., Granada, Spain, July 5-7, pp. 767-774, 2006.

144. Matt, H., Bartoli, I., Salamone, S., Rizzo, P., Lanza di Scalea, F., Park, G. and Farrar, C., “Automated Damage Detection in UAV Wing Skin-to-spar Joints Based on Outlier Analysis of Guided Wave Energy,” Proceedings of 3rd European Workshop on Structural Health Monitoring, A. Guemes, ed., Granada, Spain, July 5-7, pp. 1012-1019, 2006.

145. Bartoli, I., Marzani, A., Lanza di Scalea, F. and Viola, E., “Modeling Guided Wave Propagation for Structural Health Monitoring of Damped Waveguides,” Proceedings of 3rd European Workshop on Structural Health Monitoring, A. Guemes, ed., Granada, Spain, July 5-7, pp. 1054-1061, 2006.

146. Lanza di Scalea, F., Matt, H., Bartoli, I., Srivastava, A., Park, G. and Farrar, C., “The Fundamental Response of Piezoelectric Guided-wave Sensors and Applications to Damage and Impact Location,” Proceedings of 3rd European Workshop on Structural Health Monitoring, A. Guemes, ed., Granada, Spain, July 5-7, pp. 1271-1280, 2006.

147. Marzani, A., Bartoli, I., Lanza di Scalea, F. and Viola, E., “Finite Element Based Technique for Modeling Propagative Stress Waves in Axisymmetric Viscoelastic Waveguides,” CD-ROM Proceedings of the 16th Italian Conference on Computational Mechanics, Ubertini, Viola, De Miranda, Castellazzi, eds., Bologna, Italy, 2006.

148. Rizzo, P., Matt, H., Coccia, S., Lanza di Scalea, F., Bartoli, I., Marzani, A. and Viola, E., “Guided Ultrasonic Waves for the Inspection of Structural Components,” CD-ROM Proceedings of the 16th Italian Conference on Computational Mechanics, Ubertini, Viola, De Miranda, Castellazzi, eds., Bologna, Italy, 2006.

149. Rizzo, P., Bartoli, I, Coccia, S., and Fateh, M., “Unsupervised Learning Algorithm for High-speed Defect Detection in Rails by Laser/air-coupled Non-contact Ultrasonic Testing,” Proceedings of SPIE (International Society for Optical Engineering) Smart Structures and Materials and NDE for Health Monitoring and Diagnostics – Sensors and Smart Structures Technologies for Civil, Mechanical and Aerospace Systems, San Diego, California, Vol. 6174,

39

pp. 61742G1-61742G12, 2006. 150. Rizzo, P., Sorrivi, E., Lanza di Scalea, F. and Viola, E., “Damage Detection in Multi-wire

Strands by Discrete Wavelet-based Outlier Analysis and Embedded Guided Ultrasonic Waves,” Proceedings of SPIE (International Society for Optical Engineering) Smart Structures and Materials and NDE for Health Monitoring and Diagnostics – Modeling, Signal Processing and Control, San Diego, California, Vol. 6166, pp. 61660U1-61660U12, 2006.

151. Bartoli, I., Marzani, A., Matt, H., Lanza di Scalea, F. and Viola, E., “Modeling Wave Propagation in Damped Waveguides of Arbitrary Cross-section, ” Proceedings of SPIE (International Society for Optical Engineering) Smart Structures and Materials and NDE for Health Monitoring and Diagnostics – Health Monitoring and Smart NDE of Structural and Biological Systems V, San Diego, California, Vol. 6177, pp. 61770A1-61770A12, 2006.

152. Matt, H., Bartoli, I., Coccia, S., Lanza di Scalea, F., Oliver, J., Kosmatka, J., Park, G. and Farrar, C., “Ultrasonic Guided Wave Monitoring of Composite Bonded Joints Using Macro Fiber Composite Transducers,” Proceedings of SPIE (International Society for Optical Engineering) Smart Structures and Materials and NDE for Health Monitoring and Diagnostics – Sensors and Smart Structures Technologies for Civil, Mechanical and Aerospace Systems, San Diego, California, Vol. 6174, pp. 61742D1-61742D9, 2006.

153. Park, G., Farrar, C., Lanza di Scalea, F. and Coccia, S., “Self-Diagnosis and Validation of Active Sensors used for Structural Health Monitoring,” Proceedings of SPIE (International Society for Optical Engineering) Smart Structures and Materials and NDE for Health Monitoring and Diagnostics – Smart Structures and Integrated Systems, San Diego, California, Vol. 6173, pp. 61731N1-61731N9, 2006.

154. Matt, H., Bartoli, I., Coccia, S., Lanza di Scalea, F., Kosmatka, J., Park, G., and Farrar, C., “Guided Wave Interrogation of Composite Bonded Joints Using MFC Sensors,” Proceedings of the SEM IMAC 24th Conference and Exposition on Structural Dynamics, St. Louis, MO, 2006.

155. Bartoli, I., Marzani, A., Matt, H., Lanza di Scalea, F. and Viola, E., “Modeling Guided Wave Propagation for Structural Health Monitoring Applications,” Proceedings of the SEM IMAC 24th Conference and Exposition on Structural Dynamics, St. Louis, MO, 2006.

156. Marzani, A., Bartoli, I., Lanza di Scalea, F., and Viola, E., “Enhancement in Modeling Guided Wave Propagation by Semi-Analytical Finite Element Method for Ultrasonic Nondestructive Evaluation Purposes,” Abstract Proceedings of the 7th World Congress on Computational Mechanics, Los Angeles, CA, July 16-22, 2006.

157. Lanza di Scalea, F., Rizzo, P., Coccia, S., Bartoli, I. and Fateh, M., “Laser/air-coupled Hybrid Non-contact System for Defect Detection in Rail Tracks: Status of FRA Prototype Development at UC San Diego,” CD-ROM Proceedings of the 85th Annual Meeting of the National Transportation Research Board, Washington, DC, 2006.

158. Marzani, A., Bartoli, I., Lanza di Scalea, F. and Viola, E., “Guided Wave Features in Absorbing Waveguide with Arbitrary Cross-section,” CD-ROM Proceedings of the 17th AIMETA Congress on Theoretical and Applied Mechanics, Borri, C., Facchini, L., Federici, G., eds., Firenze, Italy, 2005.

159. Matt, H., Bartoli, I., Coccia, S., Lanza di Scalea, F., Kosmatka, J., Park, G. and Farrar, C., “Built-in Guided-wave Diagnostic System for the Wing Skin-to-spar Bond in Unmanned Aerial Vehicles,” Proceedings of the 5th International Workshop on Structural Health Monitoring, F-K. Chang, ed., Stanford University, pp. 453-461, 2005.

160. Rizzo, P., Bartoli, I., Lanza di Scalea, F., Coccia, S. and Fateh, M., “High-speed Defect Detection in Rails by Non-contact Guided Ultrasonic Testing,” Proceedings of SPIE (International Society for Optical Engineering) 10th International Symposium on Nondestructive Evaluation for Health Monitoring and Diagnostics– Health Monitoring and Smart NDE of Structural and Biological Systems IV, San Diego, California, Vol. 5768, pp.274-284, 2005.

40

161. Rizzo, P. and Lanza di Scalea, F., “Wavelet Coefficient Analysis for the Quantitative Determination of Damage in Tendons and Cables,” Proceedings of SPIE (International Society for Optical Engineering) Smart Structures and Materials/NDE Joint Conference – Sensors and Smart Structures Technologies for Civil, Mechanical and Aerospace Systems, San Diego, California, Vol. 5765, pp. 863-872, 2005.

162. Rizzo, P., Bartoli, I. and Lanza di Scalea, F., “Feature extraction for high-speed defect detection in rails by non-contact guided ultrasonic testing,” CD-ROM Abstract Proceedings of the 14th Annual Research Symposium of the American Society for Nondestructive Testing, Albuquerque, NM, 2005.

163. Matt, H., Bartoli, I., Lanza di Scalea, F., Marzani, A., Coccia, S., Oliver, J., Kosmatka, J., Rizzo, P., and Restivo, G., “A Guided-wave System for Monitoring the Wing Skin-to-spar Bond in Unmanned Aerial Vehicles,” Proceedings of SPIE (International Society for Optical Engineering) Smart Structures and Materials/NDE Joint Conference – Sensors and Smart Structures Technologies for Civil, Mechanical and Aerospace Systems, San Diego, California, Vol. 5765, pp. 658-768, 2005.

164. Rizzo, P. and Lanza di Scalea, F., “Feature extraction for the NDE of steel strands with the aid of the Discrete Wavelet Transform,” CD-ROM Abstract Proceedings of the 14th Annual Research Symposium of the American Society for Nondestructive Testing, Albuquerque, NM, 2005.

165. Rizzo, P., Bartoli, I., Coccia, S., Lanza di Scalea, F., and Fateh, M., “Enhancement in Guided Wave Structural Health Monitoring by the Discrete Wavelet Processing: Application to Multi-wire Strands and Rail Tracks,” Proceedings of the 5th International Workshop on Structural Health Monitoring, F-K. Chang, ed., Stanford University, pp. 1259-1266, 2005.

166. Lanza di Scalea, F., Rizzo, P. and Marzani, A., “Propagation of Ultrasonic Guided Waves in Lap-shear Adhesive Joints,” Proceedings of SPIE (International Society for Optical Engineering) 9th International Symposium on NDE for Health Monitoring and Diagnostics – Health Monitoring and Smart Nondestructive Evaluation of Structural and Biological Systems, San Diego, California, Vol. 5294, pp. 78-88, 2004.

167. Rizzo, P. and Lanza di Scalea, F., “Discrete Wavelet Transform to Improve Guided-wave-based Health Monitoring of Tendons and Cables,” Proceedings of SPIE (International Society for Optical Engineering) Smart Structures/NDE Joint Conference – Sensors and Smart Structures Technologies for Civil, Mechanical, and Aerospace Systems, San Diego, California, Vol. 5391, pp. 523-532, 2004.

168. Rizzo, P., Marzani, A., Lanza di Scalea, F. and Benzoni, G., “Mobile Acoustic System for the Detection of Surface-breaking Cracks in Pavement,” Proceedings of SPIE (International Society for Optical Engineering) 11th International Symposium on Smart Structures and Materials – Smart Sensor Technology and Measurement Systems, San Diego, California, Vol. 5384, pp. 98-107, 2004.

169. Rizzo, P. and Lanza di Scalea, F., “Discrete Wavelet Transform to Improve Guided-wave-based Health Monitoring of Tendons and Cables,” CD-ROM Proceedings of the Society for Experimental Mechanics 10th International Congress on Experimental and Applied Mechanics, Costa Mesa, California, 2004.

170. Lanza di Scalea, F., Rizzo, P. and Marzani, A., “Propagation of Ultrasonic Guided Waves in Lap-shear Adhesive Joints,” Abstract Proceedings of the Society for Experimental Mechanics 10th International Congress on Experimental and Applied Mechanics, Costa Mesa, California, p. 120, 2004.

171. Rizzo, P. and Lanza di Scalea, F., “Discrete Wavelet Transform to Improve Guided-wave-based Health Monitoring of Tendons and Cables,” Abstract Proceedings of the Society for Experimental Mechanics 10th International Congress on Experimental and Applied Mechanics, Costa Mesa, California, p. 120, 2004.

41

172. Lanza di Scalea, F., Rizzo, P. and Marzani, A., “Propagation of Ultrasonic Guided Waves in Lap-shear Adhesive Joints,” CD-ROM Proceedings of the Society for Experimental Mechanics 10th International Congress on Experimental and Applied Mechanics, Costa Mesa, California, 2004.

173. Rizzo, P., Palmer, M. and Lanza di Scalea, F., “Ultrasonic Characterization of Steel Rods for Health Monitoring of Civil Structures,” Proceedings of SPIE (International Society for Optical Engineering) 10th Annual International Symposium on Smart Structures and Materials –Smart Systems and Nondestructive Evaluation for Civil Infrastructures, S-C. Liu, ed., San Diego, California, Vol. 5057, pp. 75-84, 2003.

174. McNamara, J. and Lanza di Scalea, F., “Long-range Defect Detection in Rail Tracks by Guided Vibrations,” Paper Summaries Book of the Fall Conference and Quality Testing Show of the of the American Society for Nondestructive Testing, Pittsburgh, Pennsylvania, p. 106, 2003.

175. McNamara, J. and Lanza di Scalea, F., “Health Monitoring of Railroad Tracks by Wavelet Analysis,” Proceedings of SPIE (International Society for Optical Engineering) 10th Annual International Symposium on Smart Structures and Materials –Smart Systems and Nondestructive Evaluation for Civil Infrastructures, S-C. Liu, ed., San Diego, California, Vol. 5057, pp. 318-328, 2003.

176. Rizzo, P. and Lanza di Scalea, F., “Guided Waves in Steel Strands for Health Monitoring of Civil Structures,” Paper Summaries Book of the Fall Conference and Quality Testing Show of the American Society for Nondestructive Testing, Pittsburgh, Pennsylvania, p. 105, 2003.

177. Lanza di Scalea, F., Rizzo, P. and Marzani, A., “Propagation of Ultrasonic Guided Waves in Lap-shear Adhesive Joints: Case of A0 Incident Lamb Wave,” Paper Summaries Book of the Fall Conference and Quality Testing Show of the of the American Society for Nondestructive Testing, Pittsburgh, Pennsylvania, p. 20, 2003.

178. Lanza di Scalea, F., Robinson, J., Tuzzeo, D. and Bonomo, M., “Guided Wave Ultrasonics for NDE of Aging Aircraft Components,” Proceedings of SPIE (International Society for Optical Engineering) 7th Annual International Symposium on NDE for Health Monitoring and Diagnostics – NDE and Health Monitoring of Aerospace Materials and Civil Infrastructures, San Diego, California, Vol. 4704, pp. 123-132, 2002.

179. Rizzo, P. and Lanza di Scalea, F., “Monitoring Steel Strands via Ultrasonic Measurements,” Proceedings of SPIE (International Society for Optical Engineering) 9th Annual International Symposium on Smart Structures and Materials – Smart Systems for Bridges, Structures and Highways, San Diego, California, Vol. 4696, pp. 62-73, 2002.

180. McNamara, J. and Lanza di Scalea, F.,” Advances in Health Monitoring of Railroad Tracks,” Proceedings of SPIE (International Society for Optical Engineering) 7th Annual International Symposium on NDE for Health Monitoring and Diagnostics – Smart NDE and Health Monitoring of Structural and Biological Systems, San Diego, California, Vol. 4702, pp. 250-261, 2002.

181. Cicerone, S., Rizzo, P., Lanza di Scalea, F., Karbhari, V. and Seible, F., “Proof Testing and Acoustic Emission Monitoring of CFRP Stay Cables for the I-5/Gilman Bridge,” Proceedings of the 1st International Conference on Bridge Maintenance, Safety and Management (IABMAS 2002), Barcelona, Spain, 2002.

182. McNamara, J. and Lanza di Scalea, F., “NDE of Railroad Tracks by UT: Two Complementary Methods,” Paper Summaries Book of the 2002 Fall Conference and Quality Testing Show of the American Society for Nondestructive Testing, San Diego, California, p. 221, 2002.

183. Rizzo, P., McNamara, J., Palmer, M. and Lanza di Scalea, F., “Health Monitoring of Steel Strands Via Ultrasonic Guided Waves,” Paper Summaries Book of the Fall Conference and Quality Testing Show of the American Society for Nondestructive Testing, San Diego, California, p. 132, 2002

184. Tuzzeo, D., Lanza di Scalea, F. and Ajovalasit, A., “Ispezione Ultrasonica di Componenti Strutturali di Uso Aeronautico con Tecnica Non a Contatto,” (Ultrasonic Inspection of Aerospace Structural Components by Non-contact Method) Proceedings of the 30th Conference of the Italian Society for Stress Analysis (AIAS), Alghero, Italy, pp. 1537-1546, 2001.

42

185. Bonomo, M., Lanza di Scalea, F. and Ajovalasit, A., “Visualizzazione Fotoelastica di Onde Ultrasoniche di Lamb con Applicazione al Controllo Non Distruttivo di Giunti Incollati,” (Photoelastic Visualization of Ultrasonic Lamb Waves for the Nondestructive Inspection of Bonded Joints) Proceedings of the 30th Conference of the Italian Society for Stress Analysis (AIAS), Alghero, Italy, pp. 829-838, 2001.

186. Lanza di Scalea, F., Tuzzeo, D. and Bonomo, M., “Nondestructive Evaluation of Aging Aircraft by Non-contact Air-coupled Ultrasonics,” Proceedings of the Society for Experimental Mechanics Spring Conference on Experimental and Applied Mechanics, Portland, Oregon, pp. 490-493, 2001.

187. Rizzo, P. and Lanza di Scalea, F., “Acoustic Emission Monitoring of CFRP Cables for Cable-stayed Bridges,” Proceedings of the Society for Experimental Mechanics Spring Conference on Experimental and Applied Mechanics, Portland, Oregon, pp. 314-317, 2001.

188. Cicerone, S., Seible, F., Karbhari, V.M., Rizzo, P. and Lanza di Scalea, F., “Proof Testing of Carbon Fiber Reinforced Stay Cables for the I-5/Gilman Advanced Technology Bridge,” Proceedings of the 6th Caltrans Seismic Research Workshop, Sacramento, California, 2001.

189. Lanza di Scalea, F. and Rizzo, P., “Acoustic Emission Monitoring of Large-scale CFRP Cables for Suspension Bridges,” Proceedings of the 10th Spring Conference of the American Society for Nondestructive Testing, Denver, Colorado, p. 38, 2001.

190. Lanza di Scalea, F., “NDE of Aging Aircraft by Non-contact Air-coupled Guided Wave Ultrasonics,” Proceedings of the 10th Spring Conference of the American Society for Nondestructive Testing, Denver, Colorado, p. 62, 2001.

191. Lanza di Scalea, F., Rizzo, P., Karbhari, V.M. and Seible, F., “Acoustic Emission Monitoring of CFRP Cables for Cable Stayed Bridges,” Abstract Proceedings of the Joint Mechanics and Materials Summer Conference of the American Society of Mechanical Engineers (Materials and Applied Mechanics Division), American Society of Civil Engineers (Engineering Mechanics Division) and Society of Engineering Science, San Diego, California, p. 101, 2001.

192. Rizzo, P. and Lanza di Scalea, F., “Acoustic Emission Monitoring of CFRP Cables for Cable-Stayed Bridges,” Proceedings of SPIE (International Society for Optical Engineering) 6th Annual International Symposium on NDE for Health Monitoring and Diagnostics – Health Monitoring and Management of Civil Infrastructure Systems, Newport Beach, California, Vol. 4337, pp. 129-138, 2001.

193. Lanza di Scalea, F., Kenderian, S. and Green, R.E., Jr., “Non-contact Ultrasonic Inspection of Rail Tracks,” Proceedings of the 45th International SAMPE Symposium and Exhibition, Long Beach, California, pp. 1762-1769, 2000.

194. Lanza di Scalea, F., Karbhari, V.M. and Seible, F., “The I5/Gilman Advanced Technology Bridge Project,” Proceedings of SPIE (International Society for Optical Engineering) 7th Annual International Symposium on Smart Structures and Materials, Newport Beach, California, Vol. 3988, pp. 10-17, 2000.

195. Djordjevic, B.B., Kenderian, S. and Lanza di Scalea, F., “Non-contact and Remote Sensing of Broken Rails,” Proceedings of the American Society for Nondestructive Testing 9th Annual Research Symposium “On Track on a Safer Millennium,” Birmingham, Alabama, 2000.

196. Lanza di Scalea, F. and Green, R.E., Jr., "Advances in Optical Methods for Nondestructive Evaluation", Proceedings of the Society for Experimental Mechanics Spring Conference on Theoretical, Experimental and Computational Mechanics, Cincinnati, Ohio, pp. 407-410, 1999.

197. Djordjevic, B.B., Lanza di Scalea, F. and Berndt, T.P., "Hybrid Ultrasonic System for On-line Control of Fiber Placement Process," Proceedings of the 44th International SAMPE Symposium and Exhibition, Long Beach, California, pp. 1240-1245, 1999.

198. Lanza di Scalea, F., Djordjevic, B.B., Berndt, T.P. and Green, R.E., Jr., "Non-contact Ultrasonics for Process Control of Laminated Composites," Proceedings of the 8th Annual Research Symposium (Automation and Diagnostic in NDE) of the American Society for Nondestructive Testing, Orlando, Florida, p. 137, 1999.

43

199. Lanza di Scalea, F. and Green, R.E., Jr., "Non-contact Ultrasonics for Materials Nondestructive Evaluation," Journal of the Acoustical Society of America (Program of the 138th Meeting of the Acoustical Society of America), 106(4), pp. 2148-2149, 1999.

200. Lanza di Scalea, F. and Green, R.E., Jr., "Advances in Optical Methods for Nondestructive Evaluation of Structural Materials," CD-ROM Proceedings of the 13th American Society of Civil Engineers (Engineering Mechanics Division) Conference, Baltimore, Maryland, 1999.

201. Lanza di Scalea, F. and Green, R.E., Jr., "Experimental and Numerical Study of the Elastic Behavior of Composite Mechanically-fastened Joints," CD-ROM Proceedings of the 13th American Society of Civil Engineers (Engineering Mechanics Division) Conference, Baltimore, Maryland, 1999.

202. Soonsung, H., Lanza di Scalea, F. and Cloud, G.L., "Image Processing Algorithms for Whole-field Strain by Electronic Speckle Pattern Interferometry," Proceedings of the Society for Experimental Mechanics Spring Conference on Experimental and Applied Mechanics, Houston, Texas, pp. 93-96, 1998.

203. Lanza di Scalea, F., "Strain Gage Thermal Response in Orthotropic Materials: One Compensating Gage for Multiple Active Ones," Proceedings of the Society for Experimental Mechanics Spring Conference on Experimental and Applied Mechanics, Houston, Texas, pp. 519-522, 1998.

204. Lanza di Scalea, F., "Thermal Expansion Coefficients of Orthotropic Materials using Strain Gage Rosettes," Proceedings of the Society for Experimental Mechanics Spring Conference on Experimental and Applied Mechanics, Houston, Texas, pp. 515-518, 1998.

205. Cloud, G.L., Lanza di Scalea, F. and Soonsung, H., “Image Processing Algorithms for Whole-field Strain Measurement by Electronic Speckle Pattern Interferometry,” 11th International Conference on Experimental Mechanics (Abstract Proceedings), Oxford, United Kingdom, 1998.

206. Lanza di Scalea, F., Soonsung, H., Cloud, G.L. and Raju, B., "Speckle Interferometry and Numerical Analysis for Strain Map in Pin-joint," Proceedings of the Society for Experimental Mechanics Spring Conference on Experimental and Applied Mechanics, Houston, Texas, pp. 89-92, 1998.

207. Lanza di Scalea, F., Cappello, F. and Cloud, G.L., "On the Effect of Interference Fits in Composite Pin-joints," Proceedings of the 12th Annual Technical Conference of the American Society for Composites, Dearborn, Michigan, pp. 727-735, 1997.

208. Lanza di Scalea, F., Cappello, F. and Cloud, G.L., "On the Elastic Behavior of a Cross-ply Composite Pin-joint with Clearance Fits," Proceedings of the 12th Annual Technical Conference of the American Society for Composites, Dearborn, Michigan, pp. 697-706, 1997.

209. Lanza di Scalea, F., "Strain in Isotropic Pin-joints: Experimental and Numerical Analysis," Proceedings of the International Student Paper Presentation Competition of the Society for Experimental Mechanics Spring Conference on Experimental Mechanics, Bellevue, Washington, pp. 7-8, 1997.

210. Lanza di Scalea, F. and Cloud, G.L., "Stress near Interference-fit Composite Fasteners by Speckle Interferometry," Proceedings of the Society for Experimental Mechanics Spring Conference on Experimental Mechanics, Bellevue, Washington, pp. 150-151, 1997.

211. Lanza di Scalea, F. and Cloud, G.L., "Strain Measurement by Digital Speckle Pattern Interferometry," Proceedings of the Society for Experimental Mechanics Spring Conference on Experimental Mechanics, Bellevue, Washington, pp. 297-298, 1997.

212. Cloud, G.L. and Lanza di Scalea, F., “Determination of Stress Around a Single Pin-loaded Hole in Fiber-reinforced Plastic Using Phase-stepped Digital Speckle Pattern Interferometry,” Proceedings of the 25th AIAS (Italian Society for Stress Analysis) National Conference, Gallipoli, Italy, pp. 319-326, 1996.

213. Cloud, G.L. and Lanza di Scalea, F., “High-precision Strain Measurement by Phase-stepped Digital Speckle Pattern Interferometry,” Proceedings of the 25th AIAS (Italian Society for Stress Analysis) National Conference, Gallipoli, Italy, pp. 311-318, 1996.

44

Patents 1. Defect Detection In Objects Using Statistical Approaches. Lanza di Scalea, F., Coccia, S.,

Bartoli, I., Salamone, S., Rizzo, P., US Patent No. 8,626,459, issued 01/07/2014. 2. Nonlinear Ultrasonic Testing For The Non-Destructive Measurement Of Longitudinal Thermal

Stresses In Solids. Lanza di Scalea, F. and Nucera, C. US Patent Application 14/766219, filed August 6, 2015.

3. Air-Coupled Ultrasonic Inspection of Rails. Lanza di Scalea, F. International PCT Application no. PCT/US2013/34977, filed April 2, 2013.

4. Characterization Of Surface Cracks In Rail. Lanza di Scalea, F. and Phillips, R. US Patent Application Publication no. US-2015-0068296-A1, March 12, 2015.

5. Wavelet Aided Multivariate Outlier Analysis To Enhance Defect Contrast In Thermal Images, Manohar, A. and Lanza di Scalea, F., US Provisional Patent Appl. 61/624,232, filed April 13, 2012.

6. Stress Detection in Rail. Lanza di Scalea, F., Nucera, C., Phillips, R., and Coccia, S. International PCT application no. PCT/US2012/062529, filed October 30, 2012.

Personal Italian and US citizen Sports: skiing, tennis, windsurfing, martial arts – Shotokan Karate (black belt). Cavaliere di On. e Dev., Sovrano Mil. Ordine di Malta, Gran Priorato di Napoli e Sicilia

francesco lanza di scalea - university of california, san...

Documents