fortis advantage tds en 2009-08-24 estonia 2
DESCRIPTION
CatalogoTRANSCRIPT
2009-08-24 Page 1 of 2
Fortis ™ Advantage System
Technical Data Sheet
Description The Fortis™ Advantage Bulk System of sensitised pumped emulsion blends has been designed for use in wet blasting applications. Application Fortis™ Advantage has been specifically tailored for use in open cut hard rock mining. Fortis™ Advantage can be used whenever wet blast holes are encountered. It is not suitable for ground containing reactive sulphide. Key Benefits • Fortis™ Advantage is reliable in dry and wet blastholes. • The integrated product and delivery systems of the
Fortis™ Advantage Bulk System ensures accuracy, productivity and dependability of supply.
• Fortis™ Advantage is only sensitized in the borehole by chemical gassing.
• Fortis™ Advantage can be loaded at varying energies and densities to maximise fragmentation and improve mine to mill productivity.
• Fortis™ Advantage provides fully coupled explosive charges to maximise blasting outcomes.
Recommendations for Use Blasthole Charge Length Fortis™ Advantage is suitable for use in holes of up to 30 m in length, depending on hole diameter, product density and presence of water. Please contact your local Orica representative for further information. Priming and Initiation Fortis™ Advantage must be in direct contact with an appropriately sized Senatel™ packaged explosive or Pentex™ booster. The use of detonating cord may adversely affect the performance of the Fortis™ Advantage series and could result in misfires. Consult an Orica Technical Representative before attempting to use with detonating cord. Charging Fortis™ Advantage is part of the range of bulk explosives delivered by Orica's Mobile Manufacturing Units (MMU™). Fortis™ Advantage is manufactured on the MMU™ and pumped into blastholes on demand. Gassing Time Allow at least 30 minutes between loading and stemming blastholes.
Technical Properties
Fortis Advantage Product
100 70
Density (g/cm 3) (1) 1.10 –1.20 1.05 – 1.15
Minimum Blasthole Diameter (mm) (2) 65 65
Maximum Blasthole Depth (m) 30 30
Maximum Charge Length (m) 25 25
Hole Type Dry, wet or dewatered
Delivery System Pumped
Typical VOD (km/s) (3) 4.0 – 5.0 3.5 – 4.5
Relative Effective Energy (REE) (4)
Relative Weight Strength (%) 86 92
Relative Bulk Strength (%) 112 115
CO2 Output (kg/t) (5) 124 154
Sleep Time (d) 3 3
Sleep-Time within Blastholes Sleep time is dependent on factors such as hole diameter, density, ground water conditions and initiation system. Orica Mining Services Technical Personnel should be consulted if special conditions exist. Ground Temperature These products are available for use in ground temperatures -30 °C to a maximum of 50 °C. If your application requires you to operate outside this temperature range please contact your local Orica representative. Storage and Handling Product Classification Authorised Name: Fortis™ Advantage 70 Proper Shipping Name: Explosive, Blasting Type E UN No.: 0241 Classification: 1.1D EC Type Certificate: 0589.EXP.1650/08 Authorised Name: Fortis™ Advantage 100 Proper Shipping Name: Explosive, Blasting Type E UN No.: 0241 Classification: 1.1D EC Type Certificate: 0589.EXP.1653/08 All regulations pertaining to the handling and use of such explosives apply.
2009-08-24 Page 2 of 2
Fortis ™ Advantage System
Technical Data Sheet
Disposal Disposal of explosive materials can be hazardous. Methods of safe disposal of explosives may vary depending on the user’s situation. Please contact a local Orica representative for information on safe practices. Safety Fortis™ Advantage is relatively insensitive to accidental initiation by shock, friction or mechanical impact under normal conditions of use. Detonation may occur from heavy impact or excessive heating particularly under conditions of confinement. Explosives based on Ammonium Nitrate such as the Fortis™ Advantage may react with pyritic materials in the ground and create potentially hazardous situations. Orica accepts no responsibility for any loss or liability arising from use of the product in ground containing pyritic or other reactive material. Trademarks
The word Orica, the Ring device and the Orica mark are trademarks
of Orica Group Companies. Senatel™, Pentex™, Fortis™ and
MMU™ are registered trademarks of Orica Explosives Technology
Pty Ltd ACN 075 659 353, 1 Nicholson Street, East Melbourne,
Victoria, Australia. Disclaimer
The manufacturer reserves the right to modify products without prior
notice. All information in this data sheet is believed up-to-date at the
time of publication. Because Orica cannot anticipate or control the
conditions under which this information and its products may be
used, Orica does not take any responsibility for their suitability for
use in any particular application other than liabilities implied
mandatorily by law and which cannot be disclaimed. The user is
expressly responsible to verify the suitability of the information and
the product for use in any particular application. Orica's general
terms and conditions of contract, a copy of which is available upon
request, apply to all sales and are incorporated by reference. Orica Eesti OÜ
Jaama 10
41536 Jõhvi
Estonia
Phone: + 372 33 64 611
Fax: + 372 33 64 620
Email: [email protected] Emergency Telephone Numbers
Within Estonia: 33 64 616
Outside Estonia: + 372 33 64 616
Notes
1. Nominal Density Only.
2. Contact your local Orica Representative for further advice on
loading at minimum hole diameters.
3. VOD will depend on application including explosive density
blasthole diameter and degree of confinement. The VOD range
is based on minimum unconfined and calculated ideal.
4. REE is the Effective Energy relative to ANFO at a density of
0.8 g/cm3. ANFO has an effective energy of 2.30 MJ/kg.
Energies quoted are based on ideal detonation calculations
with a 100 Mpa cut off pressure. Non-ideal detonation energies
are also available on request. These take account of blasthole
diameter, rock type and explosive reaction behaviour.
5. Carbon dioxide is the main greenhouse gas produced. The
output is calculated assuming ideal detonation.