OPERATING INSTRUCTIONS

ColorTelevisionUser'sGuide

® ForModels:AV-32D500AV-32D200AV-27D500AV-27D200

/I/ustration of AV-27DSO0 and RM_-,343

Feb.1999 No.51514

od

IMPORTANT SAFETY PRECAUTIONS

P,V_==v=_r_toqu=m__ pmmrd.

z_ The lightning flash with arrowhead syml_,w_in an equila_ereJtdengle is intended toalert the user to the p_ of uninsulated•dangerous ',,_t_ e" wi_in the products6qnctosum that rney be of sufficient magnitudeto conUituts a risk of electpo shock top_scns.

The exofamazon point within an eClU_foreraJ

triangle is intended to _ the _ to thepresence of important operalf ng and maints*hence (servicing) in_ in the lfteratureaccompanying the appliance.

IMPORTANT SAFEGUARDS

CAUTION:

Pfolle rl_l and iltaJln f_r yo_lr laf_¢/.

EleCtrical energy can perform many useful functions. Tn_ TV

set has been engineered _d menufactured to assure your

personeJ seJety.But mlprcper use cen msu/t in pc_en_a/electrical shock Or life hazzuds. In order n0_to defeat the

safeguards imxxpotated in this Wsot. observe the following

basic rules for its instaJl_on, use and serv;clng.And also fOllow a_lwarnings and inductions marked on yourTV set.

INSTALLA'RON

1 Your1V set is equfppe(I x_th a _ AC line plug (one

blade of the plug is w4dei"than the other).

WARNING:

CAUTION:

TO PREVENT FIRE OR SHOCK

HAZARDS, DO NOT E)(POSE THIS T_.SET TO RAIN OR MOISTURE.

TO INSURE PERSONAL SAFETY,OBSERVE THE FOLLOWING RULES

REGARDING THE USE OF THIS UNIT.

1 Operate orJy from the power source specttJedon me unit.

2 AVOidd_tlg Ihe AC plug and pO_e¢ CO_i.3. Avoid improper InstaJlatio(1_ never position

the unit where good ventlfai_on is una_r_able.

4. DO not aJk_wcOjects ot liquid into the cabinetopenings.

5 _ntheeventofUou_, unplugtheunitand

ca_la semite technician.DO notattemp_torepair it yourself or remove the rear cove_

Changes or modificaifons not approved by JVCcould voidthewotranly

" When you don't use Ibis 1V set for a longberiodOflfme,be serefodisoonnectboththe

power plugfromtheAC ou;letand antennaforyoursafe_

• TO prevent electric shock do not _se th_spolar;zedplug_ an e_ _,_ncord,recepta-

cieor otheroutletunless_ bladescan be fullyinse,,ted to i_ever_ b_de exposure.

This safety feature allow= the p_g to ffi into _e power

OUtleto_ one way. Sl'lO_ldyou be unable _o InP,ett the

plug fully Into the outiet, t_y_ng _ plug.ShOLddit slfllfad to flL co.act y_v (dectr;cJan.

2 Operate the 3_/set ofby flora a I;X>_ r source as InOfoeted

On _heW set or refer to the operaBlg lastruc_ons for 61is

_in_mati_. If you am not sure of the type Of power _yto your home. consultyour TV Set deaJo¢o_inceJ po_er

company: For battery operat_n, refer to the operalinginstructions.

3 Overloaded AC Outletsand _on COrdsare danger-ous, and SOaze frayed power cords and broken Plugs.

They may result in a shock or fire h,szerd. CaJl your se_cetechrde_n for replacement

4 DOnot aliowanything to rest on or rollover t_e power

cord, and do not p_ace the TV =et where power CC_dis

subject to traffic Ot =buse. This m_y re,suit in a shock otfire hazard.

5 Do not use this IV set neat water -- fo_"example, near a

bathtub, weshbowl, kitchen sink. c_launmy tub, in a wet

basement, _x near swir_ning po_, etc.

6 If an outs-¥1eantenna LScorrected to _e 1V _L be surethe

antenna system i_ g_oundedso as m p,'o_desome _

against_0_tagesurgesand built_p s_a_ccha_ss. Sec_n 810

of the Na_onaJ_ Code pro_es information w#_respect

to lfxop_ Q_,Jnctng of thems_ ar,:l _opo_g s_Jctum,

gn:_nding of the _ wln_Io an antonnadischargeunit,size

of gr_ng cc_d_, foc_tinn of en_ discharge unit,conneceon teqlJr_me_ for the g_}n_g elec_0de.

7 An out,de anle_na _ _lould no_be IOCaZedin the

vicinity of oveltleed power _n_ Or other e_c_ic light orpower ctrcuit_,C_where it can fail Into SuChpower linesor

circuits. When In_tal.ng an out=lde anlenna system, extreme

€*are _ould be taken fo keep ft0m touching such power

lines or c_mult_as contact wh_hIhem mlght be falal

AI_I=F.=qi ILECTRIC&L COD_

8 I_/seL_are providedw(thven_ilal_openingsinthecabinet

toatlowheatgeneratedclur_goperatfontobe reteaSed.Therefore:

-- f_ block _e bottom ven_la_o_ slots of a porteble _

=etby p_acingIto._a bed, =ola,nJg,etc.

-- Near place _ 1V set in a "polltqn"enclosure unless

proper ver,_letfon ispm_d_l.

-- Never cov_ 61_opel i_g$ "/_lth_ cfo_ or olher materJal

-- New_"10_._theIV _ r=sar_ O_Wa raoT_ororhe_ reg_e_I To avid persm_aJInjury:

-- Do natp_c_ aIV a_ton a s;op_gsh_funles_imoper_s_oJed.

-- Use only a carl or stand recommended by the TV setmanufanturer,

-- DO nottrytorolla eattwithsmalfcastersacrossthresh-

olds c_deep pl_eca_.

-- _I or shelfmountingOfK_Jldfollowthemanufacturer's

instructions,and shoutduse a mountingkitapproved by

the tTlanufacture_

USE

10 C_u_o_c;_m_a_outdroppingc_i:_sringd_s L,toI_e_' set"_g_ cabl_ oper,hgs,So_ t_=m_pareca_yheza_(_uc_ge__d coqtactc_ reset_ a fireoreloctt:_shc_=

11 Unplug the TV se_ from the waJIcuret before cleaning. Donot use liquid or an aerosc_cleane_

12 k_ add ao:asso6_ _oa W se( _a_hasn0tbeen des_Ted fo.Ibis_ F_Ch_d_ns may lu_ h a haz_

13 F0r added ptotect_n of the W set dunng a ighmli_gstorm or

whet] theTt/set is to be le# unetlendsd foran extended penixI

of _'ne, unplugIf flora ine weJIo_Jel and disco,x_ect the

ar_e_n_ This will ptm,ent _v_age fo p,_duct due to Zgh_ingatc_rnsot_ linesu_gea.

14 A 1V sef a_d cart ccwt_*'_atlonshouldbe mm'ed w_h care.

DOiCJ<stops._cassive force, and uneven surfacesmay cause

_e 1V se( and carl COllbina_m to ovet/_/n.

SERVICE

15 Ltnplugthis_V s_t Imm _e wa_cutletand refersen_c_g to_alilfed s_v;_ persor._l under_e fo_o_ng con_it_:

A. Whenthe power c_d or pl_ is damsged odrayed,

B. If liquid h_$ been spilied into the _/set

C. If the _/set has been exposed to r_dnor weter.

D If 1heIV se{does n_4operete norrrlaliyby fc_lo_ingIheoperat_,gIns_ci_m.s. Adjusto_lythoseconvols U,.atare

c_ered in_e oc_va_ng k%tru_s asimpmp_ adjust.

meritOf o_er Controlsr_ay n_t indamage _b-._vailo(1_require_ workby a qu_Jr_iedtec_nk_ianto ro,_xe

I_e "iVset to normal operaU_.

E. If_e 1V s_ hasbeen _pped o_d_naged h any_,_F When the 1V set exhibitsa distinct change inperfof

mance -- thi s indicates e ne_ for service.

16 CO notaitempt to se_ice this"_Vset yc_m,eff asopening or

removingcovers may e_pose you to dange_ voltageoro61erhazards. Refer a_ servic_g to qua_k_l se_ce pemoreeL

17 When replacementp_Is a_ required,ha'_e_e service

technician verity in writingihat the repot p,_ts he u.s_s

he',_ _hesame safetycharacteds_cs_ ihe onginaJpar_.Use of manufacfo_ specified replacementparts can

p_evs_ fire, shock, or cther hezards.

18 Upon completion Of any seP*tcec#repaL*sto Fr=s1V set,

Please as_ the servfoetechnicianto pectonnthe safety chod<d_cribed inthe mar,JfaclurePsseneca literatma.

19

2O

Wl_n a TVset reaches 1heand ofits use_l lifo,improper

dis_x_aJcould rasu_ ina pintumtubeiml_OSiOn.A.Ska

q_ied se_ice t_c_an iodispose of _e IV set

Note to CA3_/system instelle£

Thie reminder is provided to call the CATV system inStallers

attenbon toArttole 820_K3of the NEC that providesguidelines for proper grounding and, in pad[cu_a_specifies

that the cable ground shaJJbe connected to the groundingsystem Of _hebuilding, as close to the point of cable

as prac_Cal.

CONNECTIONS

TABLE OF CONTENTS

CONNECTIONSConnectionsChecklist................ 5Frontang RearPane_D_agrsms .......... 5Cable & VCR Connections............. _ 6Connectmg to a DVD Player............. 7Connecting to a Camcorder............. 8Connectingto an ExtornalAmplifier......... 8Connectingto JVCAVCompu Link EX

CaPable G_npcnents ............. 9

GETTING STARTEDRemote Controls......... : ......... 10Power ......................... 11AdjustingVc4urne .................. 11ChangingChannels ................ 11Seleng the CATVand VCR codes ........ 12

MENU FUNCTIONSSymbols Used in thisGuile ............ 14Onscreen Menus................... 14Plug In Menu ..................... 15

LanguageAutoTunerSetupSet C,_ck .................. 16Finish

Inibal Setup ..................... 17Cha_nst SummaryChannel Guard-LockV_hip .................... 18SetLock Code .............. 21

PfctureAdjust .................... 22T_tCok_PictureBt_htDetailNoise Mut#lgSet VideoStatus

Sound Adjust.................... 23

TrebleBa_,_eMTS (Mul_annst Stereo Sound)Some SoundAdvice

Clock/Timers ..................... 24On/Off Tkner

InitialSetup ...................... 25)3/Spea_r

Aud_ OutCm'_ooner,t-/nCk;_sd Captk:w

BUll"ON FUNCTIONSMenu Button ..................... 26Exit .......................... 26

Display ........................ 26Video Status ..................... 26Sleep Timer ...................... 26BBE .......................... 27Hyper SurrOund................... 27TV/Video ....................... 27100+.......................... 27VCR Buttons ..................... 27Muting......................... 27Return+ ....................... 27Number Buttons(10 Key Pad) ........... 27PIPOrVM_ve ..................... 28Freeze ......................... 28Swap ......................... 28Channel -/+ for PIP.................. 28Source ........................ 28

APPENDICESTroubleshooting ................... 29umited Warranly................... 30AuthorizedSor_k:e Centers ............. 31Spec fflesticP..s .................... 32

CONNECTIONS CHECKLIST -- READ ME FIRST!

1) Refer to the €onnection Inntructlons In the uler'lguide for each component you plsn to connect.They will provide more detailed informs[ion abouttheir products, and they will toll you what plugs andcables are mquirab.

2) Most AN input jacks and plugs sre cntor coded:

• Yellow plugs are Video connections

• Red plugs are fo_ Right Audio connections

• Whha plugs are Left Audio (Mono) connections

3) Pertorm oils hookup nt i dine.if you have many accessories to connect, make sureeach connection is correct by checking to see that itworks propeity before attempting the ne)d connection.(For example, eiweys start with the RF or Cableconnections, make sure it WORKS.IP_n move o_ tovideo or VCR connections.)

4) Unplug the power cord between each connection.

5) Each Jack on the back of the TV is labeled. If youresd these irmb_cticqlsand still do notfullyunderstand the connectio_ process, seekassistance.

RF Connectors

S-Vldeo Plug

0AN Input Plug

AV Compu Unk Cable

6) The/IV Compu Unk Cable hi supplied with theJVC devlce which you want to (=ollneCL If you donot have one, but you do have a JVC Compu Linkcapable VCR o{ HiR, contact your locei JVC deaJe_

FRONT AND REAR PANEL DIAGRAMS

FRONT PANEL DIAGRAMAV-32D500 • AV_2D200AV-27DS00 • AV*27D2CO

REAR PANEL DIAGRAMAV-32D500 • AV-32D200AV-27D500 • AV-27D200

CO

CONNECTIONS CONNECTIONS

CABLE & VCR CONNECTIONS CABLE & VCR CONNECTIONS CONTINUED

1) Comnect cable or _'derlna RF wire OUtfrom the wall, /n to the spl_er RF ir_lJL2) _ RF wire o_t from the splto_r RF output, in to t_e VCR RF input.3) Cormem RF _re out lmm the sptl_r RF e_¢, _ to the TV VHF/UHF _ut.4) Connect yellOWvideo o_ble out f_om the VCR Video ou_p_Jt,in _othe TV Video Input jack.5) Connect while audio c_le cut from the VCR Le_ Audio output, in to the "IV Left Audio input j_ok.6) P__nect red su_o cab_ o_ from the 'K:R Rg_ iu,_ro ouepu_.,_ to _.e W ._X Audo _ _O ff your VCR is mono # llas cn;y one audio out jack, connect it to TV L/Mono _uL

1) Connect Cable RF wire out from w_dl. in to splitter RF input,2) Cc_nect RF Gutfrom splitmr RF _tl_Jt, m to cable box RF input.3) Connect RF wire c_ from cable box RF output,/n to VCR RF input.4) Connect RF wire out born Sl_ttte_ RF output, in to TV VHFtJHF input+5) Connect yellow video citableo_ born VCR Video output,/n to 33/Video input iack.6) Connect white aUdio cable ou/from VCR Le_ audio output,/n to 1_/Left Audio input Jack¸7) _ red a_o ca_ _lcm V_ _ _:_o o_,ut, ,_ to 1V _ght Audio i_c_t_ac_[_ lf your VCR ;s rnono it h_s or#y orm _udio outjack, connect ff to TV L/Mo_ input.

CONNECTING TO A DVD PLAYER

1)Connectthe cab_eRF wlre outfromthe weJl,k_to the cable boxinput.2) Coe.r,actRF_,_eoutfromthecablebox P,Foutput,_ _ theVCR RI:ircut,3) ConnectRFwire outIron tt_ VCRRFoutput..,nto the1VVPIF/UHFInput.4) Cormecty_lowvldeo cablecutfrom th_ VCRVtoeoo_Jtputin to theTVVldeo inputjack.5) Connectwhiteaudio cableout f_cmthe VCRL_I_audiooutput.#__ _ W _ _ _p_ _.6) Connectr_ audioca_ out_omtheVCRRi_ AL_OoutpC,into_e W RohtAudoin_t jack,O if y_urvCR Ismonoit hason_/oneaudiooutj_k. cm_ct # to 71/La4onoinpuL

1)ConnectgreencableoutfromDVD playar"y" video_Jtput, in to 13/"y" componemtinput.2) ConnsctI_ue cabk_out from DVDI_Yer "PB" ,_icieooutput,in toTV "Ps"c_rnpo_entinput.3) Connect_edcable outh'omDVDplayer"PR"v'=deOoutput_in to1_ _PR"_omponentinput.4) Connectredaudiocable out fromDVD Leltaudiooutput,.$1to TVLeftAudioinput2.5)Connectwhiteauto cableo_tfromDVDRig_audiooutp_ _to IV RightAudoInput_£3Green.blueandr_d are t_emostcommoncolc_sof DVDcable_.&xne modelsmay varycable_ors. pleasecor,_ the u.se_matwal for youtOVOp_yer for mo_ein_+O Be carefu/not to c_fuse #'mredDVDcab/em_ththe redaudioGutputcab/e,lt _ _ _ _ _ set_c_'mec_ns (DVDor audiooutput)befotmstatt;ngtoe otherto _void accidenta_ _wtct#ng _ _$.O Pleasesetth_ COMFONENT-/Non the/ni_WSatupMenu fo 'yES"v,_enever_ connecta D_ _a_

_ CONNECTIONS

CONNECTING TO A CAMCORDER

CONNECTIONS

CONNECTING TO JVC AV COMPU LINK EXCAPABLE COMPONENTS

1) White audio cable out from carncorder, in to TV Left Audio input jack.

2) Ye_towvideo cable out from camcorde_ _ to TV V_deo input jack.

3) If you have a stereo model oamcorder_connect the Red Audio cable out from the Carncorde_ into the TV Right Audle input jack.

TO CONNECT TO S-VHS ACCESSORIES:

Keep the audio connections the same as for a non-S*VHS VCR or camcorder (above), and use thespecial S-VHS cable that catTm with the VCR or Carncorder.

! ) S-VHS Plug out from VCR. in to TV'S S-Video input.

CONNECTING TO AN EXTERNAL AMPLIFIER

NOTE_

A) The AV Compu Link EX cable has a male 3.5 mm (mono) mini plug on each end.

B) If your JVC brand VCR has A Code/B Code Refrtote Control Switching (see your VCR instructions),using VCR A Code wi]] switch the TV to video Input 1. If you use Input 1 for Video out frownthecable box, use Input 2 here. Using B Code will switch the TV to Video Input 2.

C) To connect a JVC HiFi receiver or amplifier for a completely automated home theater, see the HiFireceiver's instructions for detailed hookup diagrams.

• In order for the VCR to start playback automatically, the recording tabs must be removed from theVHS tape. ff the tab is in place, aut_natic switching starts when you push the VCR P_Y button.

" AV COMPU LINK EX is compatible with the following 1998 receivers: RX-664V, RX*665V, RX-774V,RX-884V, RX-1024V, and later _tver models.

"** Please consult the user's manual for your JVC DVD Player on how to connect a JVC DVD Playerusing AV Compu Link EX

1) 'v%_iteaudio cable out from TV Left Audio output jack, in to Amplifier [Left] input.

2) Red audio cable out Ifom 33/Right Audio output jack. in to Amplifier [Right] input.

NOTE: A) Set the T,/Speaker to OFF (page 25). switchthe audio output to VARI (page 25), and adjustthe sound with the TV remhte_ VCt.UMEbutton.

Gq

I GETTING STARTED

REMOTE CONTROLS

RM_-343 RM-C342AV-32D500 • AV*27E_00 AV-320200 • AV-27D2(X)

CHANGING THE BATTERIES

Be sure to use on/y size AA batferfes.

] Push down on the remote's back cover and stidetowards the bottom to remove it.

] Insert the two supplied AA battaries, carefully notingthe "+" and "-" rrlarlengs on the batteries and remotecontrol.

] TOavoid a short circuit, insert "-" end first. Slide thecover back into place (until it clicks into position).

0 If the remotB contr_ a_ts erratical, tepfece the bat_fies.Typical battery life i_ usuaJ_ about six months to one yeaK

£3 We recommend alkaline batteries for a fenger battery life.

NOllE:

When you change the batteries, try to complete the taskw_in 3 minutes, ff it takes leng_r than 3 minutes, the remotecontrol c_des for your VCR and/or Cable box will have to bereset (page 12).

GETTING STARTED

POWER

O Make sure that the TV/CA_/sw_h is set to TM Switoh to CAW _Jy to operate a cable box.

£3 press the Powm button cn _e remote contrc_or the TV front penel. The On T, ner letup wili glew rod.

O The first time you turn on the _ the "Rug In Menu" will appea_ you should turn to the Plug InMenu section (page 15) now to learn more abo4Jt this menu.

To turn the power off, press the Pow_ button again. The On Timer Jampwill go out.

O When the TV is off, the OnTimer lamp remains on while the On/Off Timer function is active, but at areduced brightness.

ADJUSTING VOLUME

[] Use the V__UME-{-_ buttons ( •• ) on the front panel or remote control. Use the VOLU_E- ( • )button to lower the voJume.Press the VOLUME÷ button ( • ) raise the volume.

:::::::::::::] Press the MVnNGbutton to instantJy torn the volurne off to zero. To restore the volume to the

previous volume level, simply press the MU11NGbutlon again.

CHANGING CHANNELS

[] lO_ dl_ =:_.Press the numbers on the rernote_ tO key pad. For single<tigit channel numbers press 0 then thenumber. For chennels above 100, pre_ the 100+ button plus the 2-digit number.

[] ChIHyl_w _mn button.

*Ibs_n tbed_ one _ a free,pressthar_'s C_ So_ bu_ 8_d re_.

• To_an mrough the chr, neb ray e/_dy, h_d dovm the remote's C_,#,-M_m,Sc_ I:x_:_.Ntef two channeb goby at hemal speed, _e n_t of 1hechanr_ v_llspeed by atthe rate@ f_chonr_ p_ _ You_I n_ seei_ _ thechonn_ mty thechoag_ng_ nurnbem_theho_om ofthescm_

[] Return.

Press and release the RE_JRN+button tOreturn to the previous channel. First, select a channe_

(game #1). Then, select another channel (game #2) with the 10 key pad and push the RE1_RN+button to flip directly back and forth.

[] Return+.

Press and hold down the RETURN+button for three seconds. The message, =RETURN CHANNELP_OGP.N_MED !" witt _pbaar and you cart scar_ as you wisP,.Press _+ again a_d you will goback to the Return+ channeL

Tocancel a Return+ channel, press and hold down the RE']_IRN+ button for another three secondsand the _age, "RETURN CHJ_NNEL CANCELLSD !" appears.

0 Pressing a number key Or temlng the set off v_/siso cancel a Return+ channel

GETTING STARTED GETTING STARTED

SETrlNG THE CATV & VCR CODES

CABLE BOX OR SATELLITE SETUP

Theremote is prog_ w_ththe CATVaqd Sa_ifte codes fcr poweron and o_ 10key,and _lannel upand down.

1) Determine the correct code from the "CATV& Satellite Codes" chat betow.2) Slide the 2-Way Mode Selector Swftchto CATM3) Pressand Se_ddown the DtsP_Y button4) Enter the 3-digit code with the 10 key pad while continuingto hold down the DtsPt_ybcttc_5) Release the D_Pu_ybuti_n6) Confirm the operation of the cable box,

Note : if your cable box or satellitebox does not respond to any code _1 the chart, use the SearchCodes FunctJonbelow

CATV & Satellite Codes

GABLE E_J_ COOE8 _UlLE BO)3_ CODIW

N3C 0240G2, 0_061,032

_2 r O51068.069

D_mor_d 024, _2. 025=Jgb aZ9

3C Brand 062, 061

_r#r_ Q22. 043

021r ¢_21057, _3040. 041. _42. 045049. _24055,024,023.026.021,0_.021. 022. _7. _

049. _0, _t. 064

m 0_0_oV_ _e Q_2, 051

_ma_Nc _, 0_6_ 0_0

_a_n 063O28. 029. 0_0, 0_2, 0_3. _31,0_

_omw 0471062

Search Codes Function :

O32)CA 06fkML"_¢ 032

I=ga_ 05B. 064, 040. 041. 042, 04&

P_T, brmdt 037, 03_ 051, 038051

S¢_t_ A_mta 057. 058. OS_

051. 047

032, _61

Tl_lpbo_ O67Tm 047.061_=_¢_m O44

_50

632, C_25_2. 032

029, 030

Z_ 063 r 046Zeq_l,_ O46

SmelUte

€_ffALEB

ECh_W 100Q_. 106

112

K4tm_ 1_4_ 111I-II_ (HUO_ 104Pmmmr4c 1_

Phr,_ _0_ 103

106,109, II0107 ¸

T_th_l 101tJ_dm 1_, 1_

COOBS

1) Slidethe 2-Way Mode Selector Switchto CATV2) Pressthe TV power and RE1URN+buttons simuifaneouslyfor more than three seconds, then release.3) Pressq[3/POWERand check if the accessory respa_ds.4) If therew_.sa respanse,pressRE_eN+. if the_ewas noresponse, repeat Step 3 un6l Isere is a _. if

you repeat Slep 3 rnorethan 70 timesaod there isstil_no re_, use$_eeccesso_ remote.

VCR SETUP

The remote is pre-programmed with the VCR codes for power on and power off, pla_,,stop, fast-forward,re.rid, and chenne/ up and down.1) Determine the correct code from the "VCRCodes" chart (below).2) Slide the 2-Way Mode Selector Switch to TV.3) Pressand hold down the DtsP_y but_n,4) Enter the 3_[gif code ',_,iththe 10 key pad while continuingto hold down the D_SFL,_¥button.5) Release the DtS_¥ buttc_.6) Co_firm the operation of the VCR.£3 When you record a channel, press the PLAYbuttonwhile continuing to hold down the RECbutton.

Note : If your VCR does notrespond to any code on the chart, use the Search Codes Function below,

VCR CodesvcP_I (_o_E8

_in_r_ O3S

027_ 0_2029072.073.074

vJd*OC*_am_ OO30O6_e_& Pim_ 063, O71

_4_rlJg 0_. 029, 064_is Ma_es 045, 024, _7

VCRI CODE8

064,

WGA _3& 040. 047. 048, 041 _?

058,045038. 040. 047, 048. _41,042,

078, 090047 r 027, 062

_4._3

VCRS CODES

S=r_zuno _37, 0_, 062, 033, 0_

Sanyo 063. 067. 091. 0710_). Q_I. Q62, 067. 0_. Q40.

075

_g.lture 2_00 02"/,005$1no_r O75_oqv

_mt.oo 043. _. _Q4

043. 026, OTT, 061. ¢_25,04,_

Q_O1078

umd 027. _6. 020. 000

;E 003. (_4& 024;G_ '*'ldeo Q_7. 051. 044_.0_0. Qe9,3ok_a_r O64

G_m_ 06& 064. Qel. 000. 001Hltad_l CQ3, 045. Q_8. _'7. QelIn_Zr, t Rechw 024, 0_3

JenReq,NC 0_0. _01. 002. 00& 0C4. _6

K_w.r, od 00& 004. 064. 0_

O67

028. Q21. _. 064

Q26 _Q0

hmn_y C24. _, 045, 0_3, 00_, 004,

O43

C,4& (_8. ¢,23._,Q4.031. C4&05& 060. _33. _Z_7

X,_t er 021,022r Q_3, 0_4Iw_o S_'k 03& O24. 083, 03& 067 , C40.

O27

ICA _. 04& 068. _Q3. 024. 031.046, 06_. 060. _. 0eS. _7

_/2(_0 O27

S_a 0311 _l o24r _7

r_o o64

r_ O21,_2, _3,o24r_dka 024 _7 0"/0ro_ba 069. 046 O79

/e_or Re_*_=_ OO5(_5. 036. 067. 044. _1

(m_ha 0_3, 0_, 004. 005

!_ 044.082.064

Search Codes Function :

1) Slidethe 2-Way Mode Selector Switch to TV.2) Pressthe VCR Pow_ and R_+ buttons simultaneouslyfor morethan three seconds, then release.3) Press VCR Pow_ and check if the ac_essoq_responds.4) Ifthemwas a _e, press R_J_N+. If themwas no response,repeat Step 3 untilthere is a response.If

you repeat Step3 rnc_e_a_ 80 Urnesand there Is stJllnoresponse,usethe acce.ssowremote.

_ _ THE ONSCREEN MENUS

THE 81fMBOLS USED IN THIS GUIDE

&_f V'.rflSnEN_"yOU _e Up and down arrows _sth_book, press the M_'_U UP or MENU DCWN buttofl to:

• Move verlJcally in the main menu.• Move through a _Jbrnenu.• Move to the next letter. I1umber. or other Ghoice

in 8 Subrnenu. (x

• Back up to co/rBct an error, or• Channel Up o( Down

Whenever you see lef_ and hght arrows, press theMENU L_T or MENU P,_ button to:

• Select the highlighted item, cf• Select the options in a submenu, (x• Volume Up or Down

(_ Tr_ "P_ss Bud;ton" me_,ns yo_ _ Hess thatbutton c_ the remote cOnvol

The 'He_ping Hand" points to the highlighted orseated _ecr__r__ re_r_.

To ule the Menu. press the MENU b_3on and then useth,e &V _mci 41b" buttons to move around the menu.asdescr_t:ed _bove. it ym_ com_nt;e p_ss_r,g th,e M_'_Ubutton, the display will skip t_ the next menu screen.

N_. Ttte menu screens shown m this boo_ arerepresentations of the menu screens On your s6t,not exact rep/iGation$,

The*PiuglnMenu"ony appears#_ h_t_ttimetheTV_ p_ug_d{n

+

V,d_

mm_rA

PLUG IN MENU

PLUG IN MENU

ca/Iv when you first turn on the 73/afterptuggJng it in. The Pug In Menu sets thedefault preferences for you for:

_3]he Language in which you want the

onscreend_sp_ys_ e.ppe_.0 The AutoTuner Setupofchannels to

be included in sc_q.

0 Set the clock to the ptope_ tJrnesothat your timer functions willw_k.

LANGUAGE_ur J_ _ev_ _tiows_ _ochoosefromEnglish,French,or Spanishomscrsenmenusand displays.

_kY To LANGUAGE

• • Tochoose the language

AUTO TUNER SETUP

During Auto TunerSetup, the TV willautomaticallyscan _rough all availablechannels and memorize the active ones

so that _en you scan, you do notpletiup weak or no_ channels.

&V ToAUTO TUNER SETUP

• • Tooperate

• • To choose CABLE or AIR

&Y To move to START

• • To start pragramrning

Ftq2_g takes apptoxknat_ty1 to2mmu_s

No_ No_se Muting w_t r_, work whysAuto Tuner Setup is _rking.

(D

PLUG IN MENU

SET CLOCKThe C/_k _ the heart of all #metfuncll_,s, The c/Gckmust be setbefore the timer functions v,ork.

&V To SET CLOCK

• • To operate

• • TOsetthehour(AM/PM)

• Tomove tominutes

• • Tosettheminutes

• Tomove toSTART CLC_K

when done withsettings

• • To starttheclock

CLOCK _ ON/OFF TIMERMESSAGE

If you do not set the clock butattempt to use the On/Off Timer, youwill get the following message:

FINISH

Once you have set up the items in thePlug/n Menu you must select Finish.

&• TOFINISH• • Toexit

Note: Y_J can resst tho preferences thatyou set here in the Plug In Menu via theregular JVC Menu system.

<1• To set the hour (AM/PM)

• To move to minutes

• • To set the minutas

• To move to START CLOCK

when done with settings

• • Tostart the clock

CHANNEL SUMMARYYou can add or delete channels from

channel scanning. Youcan also k;ckout any "unauthorized"viewers fromone or up to all 125 channels.

(_ Press the MB_tj Button

&• To CH/C_NELSUMMARY

• • Tooperate

Note: Noise MutJngwill not work whileyou are in the Channel S_mmary menu.

Youcan manuallyset chanr_.s to scan63atwere too weak to be piskeciupdodng Aufo Tuner Sstag. Con•seedy, if achannel was too weak to _ a good_lure but was picked up anyway,deleteit by remo_ng the _L(If you have notpe_ _e Asto TO_erSetupdoscribab on page 15. do so n_v.)

(_ _ -/+ to se_ct the c'nannel&• To the SCAN column

• • To include or delete from scan

I_ Exrrwhen finished

Note: Channels set to scan will bemarked with an -_.

Note: S_ne cable systems experienceinterference from radio frequermie6Cable Channel 95. If you like, you candelete this channel from scanning byremoving _e q.

Comft_u_t a_ove...

INITIAL SETUP

CHANNEL GUARD - LOCK

&• TOCHANNEL SUMMARY

• • To operate

&• TOthe L.cx_kcolumn

The access code zero (0) tolock or unlock that channel

Use the CHAN_L -/+ button to go to anyothe[ channel you want _o lock

(_ EXIT when finished

CHANNEL GUARD MESSAGE:

This message appears when a viewerattempts to watch a guarded channel :

Towatsh a channel you have iscked,enter the lock code ualng the 10 key pad.If the wrong lock cede is entered,thismessage will appear:

Note_ See _SetLock Code'_ for moreinformation_

,-=

_ _ INITIAL SETUP INITIAL SETUP 1

¥.CHIP

Your7Y is equipped with V-Chip

program y_r TV to rece_, or not recer_,

Whana v_ewerat_r_o_ fo wafohabtod<edchannel this message appears:

To watch a channelyou have Iocked_entertha ldck cede ualng _e lO key pab_

To set up the TV Parental GuidelineRatings...

I_ Pressthe IvIFJ_13utton

&V TOV-CHIP

• • Tooperate (Lock icon appears)

_) Pre_ _ fo _ V4_ip menu

• • To turn V-Chip ON or OFF

&V To move _ Sk_r JV P_TINGS

VIEWING GUIDELINE8

V_V LSfor V]OL_CE I FANTASY ViCL_CE

_1 S stands f_ SEXUAL CONTENT

O L stands for strong LANGUAGE

_1 D stands for suggestive DIALOG

U.S. PARENTAL RATING SYSTEMS

Programs with the following Ratingsare appropriote for Children.

0 7VYIsApl_forAJlCidldmn.Programs _'e created for very youngviewers and should be suitable for all

ages, inclediog childrenages 2 - 6.

O TV "It'/is for Older Children.

Most parents would find such

programs suitable for children 7 andabove. There may exist some mitdfantasy violence or comedicviolence. Children should be able to

discern reality from fantasy.

Prognw=.eh Uwfo,_w_ RaUn_are appropd_e for _e _=#re aud/_€_

TV G stands for Gener_ Audkmce.

Most parents would findprograms suitable fo! all age groups.

contain lit'deor noviolence, nostrong language, and littleor nosexuaddialog or situaitons.

[3 "R/PG Parental Guidance

Suggested.May contain some. but not much,strong lenguage, limited violence.and some suggestive sexuat dialogor situations. It is r_dab thatparentswatch these programs first, orwith their children.

_3 TV 14 Parents Strongly Cautioned.Progr-'on_conteJnsc_n:ematerialmay ha unsuitablefor children unde"the age of 14 includingpo_ibleintenseviolence, sexual situations,

strongcoarse language, or intenselysuggestive dialog. Parents are

against unattendedviewingby chilofe_ under 14.

O TV MA Mature Audiences Only,lbese progran_ are sbecificallyf_(abuits and may be unsuitableforanyone uaber 17 yeansof age. T',/MAp_grams may have extensiveV,S, L._rD.

DWecUorLsto Block Viewing:Une up the cumor in the column(_/PG, TV G. efo.) with the content row(V_ & etc.) and pmsstha AorV tomove the cursorld tha correct Ioca_n,

and press <1 or I="to turn the lockingfeature _n or off.An item is kx:_ed ifthe

iconA appears instead of a "--'.

An example. To block viewers under14 from _11shows:

Move the cursor to the top row of thatcolumn and add a lock icon. Once

you've put a lock on the top row,everything in that cotumn isautomatically locked.

&_r To the TV 14 Column

• • To turn on the lock

Press Ex. when done

No_: If you want to change thesetup, move the cursor to the topCOlumnand change to 'J and thenyou can select individual catagonesto block.

To set up Movie Ratlng_s...

(_ Press the MENUbutton&Y TOV-CHIP

• • TOoperate (Lock icon J_J

appears)

(_ Press ZEROto access V-Chip setupoptions

&V To SET MOVIE RATINGS

• • To enter movies menu

0 NR - Not Rated.

Ttlis is a film that has no rating. In manycas6_ these films were i_ fro_o_m counttios.Othe"NR finnsm_y befrom amateur Woducem who didn'tintendto have their flk'nwibely raleesab.

NR (Not Rated) Programming maycontain all types of prograrnmingldc/udiag chhi/dren's programming,fc{eign programs, or adu# mat_aL

O G - General Audience.

In the opinion of the review board.these films contain nothing in the wayof sexual content, violence, orlanguage that would be unsuitable foraudiences of any age.

O PG - Parental Guidance.

Parental Guideance means the mov_may contains_me co, tentssuch as mildvk3lence,Borne brief nudity,and sl_Onglanguage. The contents are notdeemedintense.

0 PG-13 - Parents Strongly Cautk)ned.

For parents with children under 13,they are cautiOned that the content ofrnovle_ with this rating is more explicitin sexual, language, and viofencecontent than PG.

INITIAL SETUP

0 R Re.rioted.

These films contain material that isexplicit in nature and is notrecommended for unsupervisedchildren under the age of 17.

0 NC-17 NO One Under 17.These rTx_es am _nalpered what m_t

parents wouldfeel is too adult fo_ thorchildren to view and can consist of stronglanguage, nudity, _otsnce,suggestiveand ex_icit subject rnattets.

0 X NO One under 18,

Innappropriate for anyone under 18.

D/mctlonB toBlock Movie Vlewlng..

Inordertoblock"viewersfromar'_or811of

thesesortsofcontents,pressthe

Aor Vto move thecurse"tothecorrect

l_taln,and press• or • totornthel_king feature_ oroff.An itemislocked

if_e _ iconappears insteadofa -m..

To blockviewersunderX and NC-I7

ratedfrom shows:

&V To theX Column

• • To tornon the tsck

m&V Tothe NC-17 Column

• • Toturnon thelock

iq_) Pre_sEXiTwhen dOrle

AboutUnratedPrograms:

Unrated p_gramming refers to anyptograrnmfog that does not contain arating signal. Programming on tatsvisionstations which do not broadcast ratings

signal will be in the "UnratadProgramming" category.

Examples of Unrated programs:

Emergency BulletinsLocally o_iginatad programmingNews

Political ProgramsPub(ic Service AnnouncementsReligious ProgramsSportsWeatherSome Commercials

Note: TV programs or movies that do nothave rating signal will be blocked if theUnratod Category is set to LOCK

DIrecUm_ to Block Unrat_l Programs:

You can block programs that are notrated.

(_) Press the M_qu button&Y TOV-CHIP

• • TOoperate

Press Z_O to access V-Chip setupoptions

&V To UNRATED

• • To View o_ Block

(_) Press EXiTwhen done

INITIAL SETUP

Accessing V-Chip Informa#on:

Toaccess Rating information about acertain program, pre_s the V-CHI_ buttonwhile viewing that program, this appears:

If you decide you want to block thiscategory of viewfng, press '0" while theabove screen is visible, and all programsfrom that category will be locked.

F.xampleI:

If you want to set your V_;hip settings toblock all programming above TV PC:

Press 0 (zero) when TV-PG isdiSpLayed

All Programming above TV PG willbe blockap!

Examp/e2:

If you want to set your V_hip settings toblock all programming above a currentsetting such as TV PG*V (with vioisnce):

(_ Press O (zero) when W_F13- V isdisplayed

All Programming above TV PG withViolence will be blockedl

Nota:

For Childrens programming you canblock TV-y and Y programs byPressing "0" when Y is displayedduring a program. Programming foraudiences Other than children_audiences will not be affected.

LOCK CODE

The Lock Code locks and unk_cks

Channel Guard and V_hip settings.Wr#e this four digit number down andkeep it safe!

_) _ tha M_lu buti_

AV To SET LOOK CODE

• • TOoperate

aThe padlock icon appears

ZEqO(tha access code is zero)

• • To choose the number

&V TOmove to the next place

Continue to follow these directions forall four numbers

&Y TORNJSH

• • To save settings and exit

Note: If you for'orgeletthe Lock Codeyou can set another one this sameway.

Note** After a power interruption youmust reset the lock code.

,=_.

PICTURE ADJUST

TINT

Adjust the levels of red and green.

(_ Pressthe MENUButton&V To TINT

• To accentuate green

• To accentuate red

&y To move to the next

COLOR

Adjust both the vividness and sub_alyof #le cok_

(_) Press the MENUButtonAY To COLOR

• To make colors more vivid

• To subdue colors

&V To move to the next

PIOlFUNE

Picture allows you to adjust thepicture_ range of black and white.

Press the MENUBu_onTOPICTURE

• To increase contrast

• To decrease contrast

&V TOmove to the next

BN/@NT

Adjust the degree of fight and dark.

Press the MFJ_ ButtonTo BRIGHT

• To lightenthe picture

• TOdarken the pictureAV To move to the next

DErA/L

Adjust the level of detail in the picture.

(_ Press the MENUButton4,y To DETAIL

• To make the picture sharper

• To make the picture smoother

Ay To move to the next

NOISE MUll3NOInserts a blue screen and aliminatesr_ise from channels that are not

broadcasting o[ are too weak.

Pmss rne Me_J Buttc_

&V To NO_SEMUTING

• • To turn ON/OR:

Note: Noise Muting will not workwhen you operate the Auto TunerSetup or Channel Summary,

SET VIDEO STATUSSave a set of Picture Set_ngs andaccess later as "Choice".

_) Press the MENUButton

&y TOSET VIDEO STATUS

• • TOoperate

• IP TOoperate the TINT opUon

kY To move to the next option

Repeat_e abovsstepstoseteachopen.

Ay TOSAVE AS CHOICE

• • To save settings and exit

Note: Access your "Choice" settingsby pressing the VIDEOSTA_JSbuttonon the remote control,

BASS

Tne Bass _ve/ adjus_n_t fea_Heallows you to raisa or lowsr P_e leval ofIower _ _ #Te71rs sound.

(_ Press the MENUButton

&V To BASS

• To emphasize bass• To reduce bass

AV To move to next

TREBLE

_e Trab_ _ edjus_ent featurea#owsyou to ralse or lov_ tha levalofhigh_ _c_s _ _e TVs sound

Press the MENUButton

AY TO TREBLE

• TOemphasize treble

• To reduce treble

AV TOmove tonext

WeEThe Balance adjustment featureallows you to cenatr the T_ sound

to yc_r needs.

(_ Press the MES_JButton

AY To BALANCE

• To shift the speaker balanceto the right

• To shift the speaker balanceto the left

&lr To move to next

SOUND ADJUST

MTS (Mul_.hannelTelevision Sound)MrS t_chnalogy gives you a choiceamong stereo, _, and SecondAudio Programs (SAP).

(m) Press the MEe,'UButton&y To MTS

• • Select the mode

(Ti_eON A/R a_rowtelL_y_u ffrhecutrentsignalcontalnsStereoor SAP)

Note: Keep the TV in STEREO modeto get the fenest soundquaJity,

Note: SAP will allow you to hear analternative soundtrack, ifavailable,

Note: Choose MONO to reduceexcess noise in a program orchannel.

CLOCK/TIMERS

ON/OFF TIMERYOU tell the TV to turn on and off

Use it as an alarm to wake up, as aprogram reminder, or to simulate thatyou*re home when you're out of thehouse.

1_ Press the ME_qUButton,kV To ON/OFF TIMER

• • To operate

• • TOset the hour (AM/PM) you

want the TV to turn on

• Tomove to minutes

• • Toset the minutes

• Toaccept ON TIME and to rno.,e

tu OFFTIME (sat _ne agan)• To move to CHANNEL

• • To select channel

• To move to MODE

• • Choose ONCE or EVERYDAY

• To YES NO

<1• Choose YES for on, NO for off

• To FINISH

• • TOsave settings

Note: in order for ON/OFF Timer towed<, the clock must be set. After epower interruptionthe clock will becancelled.

Note: ON/OFFTirner cannot be set

to locked or guarded channels.

Note: A Timer Preview window

(D-500 series only) will appear in thePiP. lower right corner of yourscreen. 7 seconds before the Timer

changes the current channel to thetimed program channel.

pTimer activates

(Preview of ON/OFFTimer program)

2"s_onde tater...

4

Timer activates

INITIAL SETUP

TV SPEAKER

You can listen to the TV speakers, orif your set is c_nected to a stereo,turn them off to listen to the ster_

speakers,

(_ Press the MENUButton

&• To TV SPEAKER

• • To turn the speaker ONor OFF

Exfr when finished

NOte: TV Speaker will be cancelledafter a power interruption.

Note: Before you set TV Speakerfrom Off to On, make certain thotthe volume kivel Is IowJ If the

Volume is high, the sound will beextremely loud when you turn iton.

AUDIO OUTSelect fixed level or variable level

audio ou_out signals,

I_ Press the MENUButton

&• TOAUDIO OUT

• • To VARI or FIX

VARI: Adjust the volume of theexternal speaker by using the TV'sV__UME+_ button or remo_ control.

FIX: Adjust the volume of theexternal speaker with the audiodevice controls.

Note: When using exlerneJamplifiersand speakers, shut off theTV Speakers (above).

COMPONENT.IN

Get the best quality video from yourDVD player by using this setting andthe DVD inputs at the rear of thetelevision. Set the Video2 input eitherto the component input (for DVD)"YES; or to the composite video input(for a reguler VCR player) "NO_

(_ Press the MENUButton

&• TOCOMPONENT-IN

• • TOturn the input ONor OFF

(_ E_ff when finished

Note: For more information onconnecting a DVD player, see page 7.

Note: This function is to be usedwith DVD players only, Forconnecting VCR's, see page 6,

CLOSED CAPTION

ff they are included ina program, youcan view closed captions or textinformation.

(_ Press the MENUbutton&• TOCLOSED CAPTION

• • To operate

• • TOselect CAPTION, TEXT or OFF

&• ToCAPTION or TEXT

• • TOselect a caption (CCl toCC4) or text channel (TI to T4)

• To accept that selection andmove to FINtSH

• • To exit and save settings

BUTTON FUNC

MENU

The MENUbutton a/tows you to accessthe onscreen menu system. Anothercomplete discussion of these butter,sand the menu system is located onpaget4,

Once you press the menu button, theCHANNEL-I+ ( &V ) and VOLUMe-/+( 41_ ) buttons work to operate the

menu system.

• Press ( &y ) to rr_ve up and down inthe menu system,

• Press ( ,<b- ) to operate a feature inthe menu systarn.

The FXITbutton lets you leave themenu system or tom off PIP when youptess iz

DISPL&Y

Theenscrean display shows the currentstatus of timers and inputs.

DtSPLAy

CI T]_echanr_ or AV input (Oh. 07)

Q Current time (12:20 PM)

Q Sleep Timer ndnutes remaining (Off)

[3 On/Off ]3rner status (Everyday, on at;_00 PM, off at 1_00 PM)

Not=: Each press of the DtSPLAybuttonchanges the display mode:

If you select time or channel, the timeor channel (or video input) will remainon the screen.

TIONS

VIDEO STATUS

The V_o S_JS bUtton lets y3u select_e "Choice"satticgs of t_ Set WdeoSletus rr_enu,or reset tu factory sattJngs.

=b"tar_ard" resets the picture settingsto factory standard levels,

"ChoiCe" consists of the settings thatyou sg.ved in the Set Video Statusmenu, page 22.

"Th=mter" for a film-like look to video.

(_ VIDEO STA_JS

W lr11111_

The Sleep Timer will turn off the TV foryou in case ycu fall asleep. Pn_ram ttto work in inte/yals of 15 minutes up tofSO mlnuats.

SLEEP TIMER MESSAGE:

20 seconds prior to the automatic

shut-off, this mesaage will appear:

Youthen have 20 seconds to press theSleep Timer button to delay turn off for

another 15 mtt_t:to&

BUTTON

BBE

BBE high definition audio adds natural,clear and extracrdinary sound to anyprogram.

JRfPER SURROUND

Create a deep, 3-dimensional soundeffect by channeling the sound throughthe TV's front firing speakers.

I_ HYP_ SURROUND

TV/V#DEOTV/V_o controls the TV's input mode.

100 +

The 100+ button lets you access allchannels above Channel 99.

To move to Channel 124:

(_ 100+

_) 4 (f_Jr)

VCR Iltrl'ro_t_l

This remo_ will controly_ur VCR. Youcan play, rewind and fast.forward,feceS, pause, stop, move channel upand down, and power on and off

Note: This remote is preset with thecode 000 to control a JVC VCR. For

any other brand, you mult set up themanufacturer's code (page 12.)

FUNCTIONS

MUI1NG

The MunNG button toms the sound off

completely when you press it. Press itagain to restore Lha volume to theprevious level.

RETURN+Therearetwo kindsof Return.,.

Re_m.p -- Set a "Ratum Channel" toreturn to after scanning with CPP,NN_ -/+.

(_) REIL_N+ and hold to_ 3 seconds

&'.an with _ -/÷

RETURN+

Note: TOc_cel a Returnchannel,and hc_l Return+ f_r a/lo_ef 3 securesur_l "RETURNCHANNEL CANCELLED!"

appears.

R_um -- Retom to the last channelviewed after moving to another channelvia the 10 key pac_

RETURN+Move to another channel with

the 10 key pad.

(_ RElURN+

Nole: _en P_ ls on, _'_eRE_Um,_-bu_t_n

function affects only the main screen.

MmlB_ B_ I IO KElf R_DChengech_,_ wi__e1Okeyped.

Forexample,tomove to Channel7:

(_) 0(zero)

(_) 7(seven)

BUTTON FUNC

ON/tiOV£ (Picture in Pinture)PIPallowsyou to wewtwopicturessimuitanecus/y

i_ (PIP) ON/IVfoVE

mI_ EXiT to turn PiP off

Note: The PIP channel and mai_

screen channel will appear in thedisplay rnon_ntarily right after you turnon PiP. You can teave them uppermanently by pressing DISPL_,yuntilyou reach the mode.

Note: The PIP Screen is 1/9 of theregular screen size.

Once PiP is turned on, the ON/IVIOV_Ebutton operates the Move feature.

You can move the PIP window to any ofthe TV's four corners.

Note: Each press of the On/MovEbutton will shiftthe PIP window oneposition.

Note: When the PIP screen has no

signal, the PIP window will be blue.

TIONS

FREEZE

Youcan freeze the picture in _e mainscreen into the PIP windo_

_) FREEZE

Note: When the PIP is off. pressingFREEZEtakes a snapshot of the mainscreen and puts it into the PiPwindow.., great for catching those mailorder addresses.

Note: When the PIP is on FPJEF1Estopsthe PIP picture.

SWAP

YGucan swap the P/P picture and themain picture.

_ SWAP

CHANNEL 4+ For PIP

Change the channel in the PIP _findo_

CH4+

I_UmCEYou can select the source for the PIP

windo_

Nots: When you connect the

component input (OVD) to V-2, the PIPwindow will be blue.

TROUBLESHOOTING

No power

No pictureor sound

Remote controlis

notoperating

You caNrlotsaiect acertefn channel

Powertomsoff

The clockis wrong

I|Poorcolorquality

Lines or streaksacro_ the 8creell

Spotted pleture

Double picture(Ghosts)

Snowy pleture/Image noise

Screen is 8G% bisck

• See if the power cord became unplugged,

• Perhaps you have experienced a blown cimuit breaker or fuse or a power outage

• The antenna could be disconnected.

• The input mode _ or video) could not be set properly, refer to page 27.

• The tuner mode (in the menu selection) could be set improperly, refer to page 15• The staiton may be having dif_cul_es, check to see if other channels are operating normally.

• Check that the batteries are still wothJng and properly installed.• Make sure there are no objects blocking a clear path from the remote to the _L

• Check that the 2-way mode sefecto_"switch is in the proper pesitto_ -- 8st to TV to view televis_n

• Maybe you are too te," from the TV. you must be within 23 feet (or 7 n_ters).• Make sure the channels a_e progran',m_d. See Channel Summary, page 17.• Perhaps _e channel is locked, select it with Ihe 10 key pad and futlew les_uctions.

• Perhaps the Or_ Timer is set, press the power button, check page 24• The power was ir,te_lJpted or Ibe _ cord unplugged.* 33".eSleep Timer rnay pe seL see page Z6.

• The clock needs to be reset. See page 16.

lih i• Tint a_l cefo_ may be Improderly adjusted, Check pege 22.• _peo Status mode may be set to an inappropriate setting. Check page 22

• There cOUld be interference from another energy consuming appliance, such as a computer,

another TV or VCR. Move any other such appJlenees ter ther away fr(Jcn the TV.

• Ti_ere could be intederence 5ore a running high wattage appliance such as a hair_ryer, vacuumGisane_ or nectl sig_. You will have to move the anterma away from the source of the interfer-ence or change it to a coaxial cable which is less prone to inledarence.

• A building or akplane can reflect the original signal producing a sec_d, delayed one. Adjustthe antenna position,

• The antenna may be damaged, dilated or turned, Check the antenna connection.pages 6 to 7. It it is dan_ged, you will have to replace it.

• Ctoc_d Caption Text Mode is on.

1"

B_q_JaJ (x slemo • Make sure 6_e MTS mode is properly set. Refer to page 23 for details on setting MTS Modes.I:_rjans cant ke hm=d

No sound from TV * TV Speakers may be turned off in the menu. see page 25.speakers at all

I'i'llli ........ I'liln[Stotic ai_icify • It is nofmef to toef a surge of stegc aleci_'icity if you brL,sh over or touch the screen.

Occa.s_n_ • It Js normal th_ the ]_' to emit crackling sounds whefl turned on or off Unless the soond orc_ackJing sounds picture become abi!orma[, this is fine,

o<

o_

AUTHORIZED SERVICE CENTERS

JVCHOW TO LOCATE YOUR JVC SERVICE CENTER

"rOLL FRF.._: 1 (800) 837-6722

_r Cmt_, httpdlwww.Jvc_mrvlce.com ]

_n_rder t_ n_e_ve _;e m_8t _t_n fr_m y_ur _ read _e k_c_ b_Nwt befo_ _p_a_g b_eur4L _nther

or _ _e Con_'_*t_ United _a_es, _1-8OO-537-5722 for youcw#J_r;z_i mewlc_ _ to mcainyo_r S# _

Salef_cWan_ Se_4om. -- JVC

JVC SERVICE & ENGINEERINGCOMPANY OF AMERICA

DIVISION OF JVC AMERICAS CORR

FACTORY SERVICE CENTER LOCATIONS

}ear custc_er;

Inord_" to rsceive the mcet satJsfactlC_from your purchase, read thls guide before opera_ng the unit, and baize caiting_r service make sure yo_ check _ Tn;o_Jeshoo_ngpages at the end of this book. Inthe even_ that repeatis necessa_, or

_3 address nearest you, please refer to the fac_c_yservice center list below, or vAthin_ con_nentaJUnited States, callthe t_l free nurnbe_above fo_an au_0dzed service center Renumber to retainyour bill of sale forwan'amy sen'_e.

107 Littte FallsRoad 15_X_Lakes Parkway 705 En_rise StreetFallhald, NJ 07004-2105 Lawrencevitle, GA 30_43-5857 Aurc_a, IL 60504_149973) 808-9279 (404} 339-25L_ (630) 851-7855

5665 CorporateAvenue 296_ Mapunapuna Ple_e 10700 Hammedy Suite ! 10Cypmq, CA 90630-0024 Honolulu, HA 96819-2040 Houston, 33( 77043(714) 2298011 (808) 833-5828 (713) 9_5-9331

13 Cummings Park 8192 SLateRoad 84 890 Dubuque AvenueWobum, MA 01801 Da_qe.FL 33324 South San R'ar_sco. CA g4_80-1804(781 } 376-9100 (954) 472-1969 (650) 871-2666

Sophist_at_d electronic products may require occasior_ sen,ice JuSt as qua/P//s a key_o_d In ff_e engineertng andpr_uc_n _f the _de arr_y _f JVC pmducts_ m is key t_ maintajning the h_ _eve/_f pe_rmance _ _J_ J_is word famous¸ The JVC semite and engineering orga_zation stands behind ow products,

NATIONAL HEADQUARTERSJVC _ICE & ENGINEERING COMPANY OF AMERICA

DIVISION OF JVC AMERICAS CORE1700 Valley Road

Wayne. New Jersey 07470

IF YOU SHIP THE PRODUCT --1 Don't servl_e it yourself.rpa_ you_ JVC unit ln theoriginat cart_ c_ _4_eof equivalentand s_ng_. Enck_e, _ the un_ a tet_ s_t_n_ the CAUTION

prob/ern or syrnptom that ex_sts_nd also s copy ohthe receiot orbi!/ of sa!e y_u _ived when you purchased your JVC uniLPdnt Toprev_t e/6c_ical slx_k, do nct o_en they(_r home re_urnaddress on _heoutside end inside of the cabinet. No user _b/e pa/ts insidec_ton. Send to the appropdate JVC Facto_ySen_e Cen_ as Refer to oua/ified sen_e _wsonn_.

ACCESSORIES

TOpurchase acce_rles for your JVC product you may contact _ou_ /ocaJJVC Dea_ Or from the_ UnltsclStatas ca_ tofl_ : I (_0) a_2-23_

I

Type

Recep_on Forma

Reception Range

Power Source

Pow_

Screen Size

Audio Output

SpeaY.efs

Antenna Terminal

_nal inputJecks

S-",rldeo InputJack

CompormntInpuJack

Audio OutputJacks

AVCompe UnkE_Jack

D_=e_e_s ('_chas(WxH xD)-(crn}

Weight (Ibs.)Weight (1_,)

Accessories

SPECIFICATIONS

NTSC system, STSD system (Mult_channe[ Sound)

VHF 2 to 13, UHF 14 to 69Sub Mid, Mid, Super, H_per and Uli_a bands

(181 channel frequency synthesizer system)

AC !20_ 60Hz

133W I 1.9A 128W / 1.8A 123W / 1.8A i 118W/1.7A

I

32"/80 cm measured 27"/68 cm mee.sured

diagonally, fall square diagon aJly,full square

5.0W + 5.0W

5cm x 12 onotalx2

75 ohms (VHF/UHF) terminal (F-_ype connector)

Video:1 Vp-p. 75 ohmsAudiO:500 mVrrns (-4 dBs), high impedance

_ 1vp-p 10ositiva,75 ohms(negativesyncprovided)C:0286 Vl>P(burstsign_J,75 chrns

Y:1Vl>Ppositive,75 ohms(neqeu_esyncpro_eq)I:_: 0.7 Vp-p, 75ohms

Morn than O to 1,_Vrrns (+6 dBs), k_w impedance (400 HZ when modulated 100%)

3.5 mm mini jack x 1

33 7_'x2Tx 21 5_ 295_" x 23 1/4' x 19 lfZ85_9 x 68.4 x 54.B Q'q 75_. x 59.0 x 49.40T_

114.4 (thS.) 78.1 (thS.)

52.0 (kl_.) 35.5 (kg.)

Remote con frc_ x 1 • AA Sat_eries x 2

Spec/f_a_nssub_t _ocha,'_ew_,_ not,_e.

JVC COMPANY OF AMERICADIVISION OFJVC AME_tlCASCORP.

1700ValleyRoeqWayne, New Jersey 07470

JVC" JVC CANADA, INC.21 RnChdeneSquare$carb_'ough, Ontario

Canada M1X "_A7

LCT_IA _