forfits - escapforfits was developed in the vensim modelling environment two components •vensim...
TRANSCRIPT
-
Evaluating CO2 emissions in inland transport and climate change mitigation
ForFITSA monitoring and assessment tool "For Future Inland Transport Systems"General overview
Pierpaolo Cazzola ‐ UNECE Transport Division
Regional Capacity Building Workshop on Measurement of Inland Transport CO2 Emissions and Mitigation Policies
26‐27 September 2013, Bangkok, Thailand
-
ForFITSModel requirements
Key requirements
Allow the estimation/assessment of emissions in transportAllow the evaluation of transportpolicies for CO2 emission mitigation
Be developed as a software toolBe freely available for users (e.g. national and local governments, general public)Be developed between 2011 and 2013
Sectoral model (focused on inland transport only): we do not expect it to target the evaluation of overall effects on the economic growth
Convert information on transport activity into fuel consumption and CO2 emission estimates considering the influence of the demographic and socio‐economic context, including policy inputs
-
ForFITS modelCoverage
• Passenger and freight transport services• Two different areas (e.g. to define the transport systems: urban, non‐urban, non‐spec.)• Nine transport modes: non‐motorized transport, two wheelers, three wheelers, light road
vehicles, medium and heavy road vehicles, rail, navigation (inland, short‐sea and deep‐sea/martime), air and pipelines
• Different vehicle subsets within each mode (organized in six vehicle classes – A to F) (figures)
• 31 powertrain technologies (e.g. internal combustion engines, hydraulic hybrids, electric hybrids, plug‐ins, fuel cell, electric)
• 10 fuel blends some of which are associated with specific modes and/or powertrains
-
Transport activity (pkm, tkm, vkm) and vehicle stock
New vehicle registrations by
age and by powertrain
Energy use
CO2emissions
ForFITS modelKey modelling steps
Four key modelling steps•Generation of transport activity (pkm, tkm, vkm) and vehicle stock•Evaluation of new vehicle registrations by powertrain and characterization of the vehicles by age•Calculation of the energy use•Estimation of CO2 emissions
Emission factors
Energy consumption
per kmVehicle price by powertrain
GDP, population, structure of the transport system
Vehicle scrappage
Fuel price
-
ForFITS modelDemand generation
Transport activity (pkm, tkm), vehicle activity (vkm) and vehicle stock are largely determined by:•Relationships linking GDP and population with transport activity
• GDP per capita with vehicle ownership and pkm• Economic output (GDP) with tonnes lifted• Effects of changes in the cost of driving and moving goods• Elasticities of pkm, tkm, average travel and average loads• Structural changes in the transport system• Passenger transport system (mainly with respect to the role of public transport, to
assess policies related with modal shift)• Freight transport system (and related economic structure, and especially the
impacts this has on modal choice and the average length of hauls)Behavioral aspects (environmental culture) are also taken into account for passenger
transport (elasticities on key passenger transport parameters)Coherence due to related inputs (such as GDP growth and economic structure, or the effect on GDP growth due to changes in the cost of driving) needs to be assured by users
-
ForFITS model: demand generationPassenger transport (1/3)
Sources: elaboration of national and international databases, building on the information referenced in UNECE, 2012
Motorized personal vehicles ownership
Motorized personal vehicles
•Vehicle stock primarily a function of GDP per capita (figure)•Annual vehicle travel (km/year) affected by changes in the cost of driving (through direct and cross elasticities) •Vehicle load affected by changes of vehicle ownership (lower ownership associated with higher average loads)
Shifts to/from personal from/to public transport are considered as structural changes having an effect on:•the vehicle stock (vehicle ownership is lower in areas with high shares of public transport)•the average travel per vehicle (the average travel of personal vehicles is lower in areas with high shares of public transport)
Vehicle ownership is also assumed to be influenced by environmental culture (behavioural aspect)
-
ForFITS model: demand generationPassenger transport (2/3)
Source: elaboration of UITP, quoted by IEA, 2008
Public transport (except air)•Pkm share on public transport modes (in total personal and public transport, excluding air) primarily a function of GDP per capita (figure), also assumed to be influenced by environmental culture (behavioural aspect)•Pkm affected by changes in the cost of driving (direct & cross elasticities)•Pkm influenced by modal shifts to/from personal from/to public transport•Vkm from pkm and annual travel•Vehicle stock from vkm and loads Modal share of personal vehicles in total personal and public transport
-
ForFITS model: demand generationPassenger transport (3/3)
Source: elaboration of Schäfer, 2005
Air transport•Pkm share of air transport (in total pkm) pimarily a function of GDP per capita (figure), also assumed to be influenced by environmental culture (behavioural aspect)•Pkm affected by changes in the cost of driving (direct & cross elasticities)•Vkm from pkm and annual travel•Vehicle stock from vkm and loads
Modal share of air transport in total transport
Average
Low
High
Pkm share of a
ir transport in total pkm
-
ForFITS model: demand generationFreight transport (1/2)
Tkm and loads are also subject to the influence of the cost of moving goods (through elasticities)
Source: IEA, 2004
Freight transport activity and GDPLarge‐freight•Transport activity (tkm) proportional to GDP (figure)•Tkm is the product of tonnes lifted (also proportional to GDP) and haul length (constant by distance class)
Tonnes lifted by mode are subject to structural changes, driven by:•the trade‐related nature of the economy (e.g. free trade vs. low imports and exports)• the origin/destination of goods (e.g. changes in sourcing and/or destination of exports)• the type of goods transported (e.g. change of importance of the manufacturing industry with vs.
primary material extraction and trade)• the modal competitiveness (e.g. changes due to the construction of new network links)
Vkm from tkm and annual travelVehicle stock from vkm and loads
-
ForFITS model: demand generationFreight transport (2/2)
Light road freight vehicle share in total road freight
Light road freight•Light commercial vehicles (
-
ForFITS modelPowertrain selection
Information on average vehicle travel (km/year) is needed to characterize fuel costs• average vehicle travel assumed to decrease with
vehicle age
Multinomial logit: used when the "endogenous powertrain selection" is activatedChoice based on the maximization of consumer utility• corresponds to the maximization of savings from the powertrain selectionRequires the characterization of the utility of all options (powertrains of each vehicle class)• Vehicle and fuel prices ‐ including costs, margins and tax rates • Vehicle fuel consumption• Discount rates
• alternative technologies to gasoline‐powered positive‐ignition powertrains assumed to travel more if their market share is close to zero (figure)
Users are assumed to consider constant fuel prices when taking into account future expenditures (this is justified by the volatility of fuel prices)
Sources: various datasets and publications, including Bodek and Heywood (2008), Eurostat, Howley et al. (2007), Caputo et al. (2008)
Average travel and share of diesel powertrains in selected countries
-
ForFITS modelFuel consumption
-
ForFITS modelCO2 emissions
-
ForFITS modelSimplified structure
Passenger transport demand generation module
Freight transport demand generation module
Transport activity (pkm, tkm, vkm) and vehicle stock
New vehicle registrations by
age and by powertrain
Energy use
CO2 emissions
Vehicle characteristics (vehicle price, technology cost, fuel consumption, performance) by powertrain
Fuel characteristics (emission factors)
Gross Domestic ProductPopulation(base year and projections)
Passenger transport system characteristicsBase year: vehicles, travel and loadsProjections: structural information
Policy inputs ASIF
extended ASIF
ASIF
Fuel characteristics (cost and taxes)
Freight transport system characteristics Base year: vehicles, travel and loadsProjections: structural information
-
ForFITS modelFile structure
ForFITS was developed in the Vensim modelling environment
Two components
•Vensim Packaged Model (.vpm file)•Excel interface (.xls file)VPM file
•Model, structured in a set of "views" showing portions of the model•This file can be opened with the Vensim Model Reader, a free software downloadable here: http://vensim.com/vensim‐model‐reader
Excel file
•Interface allowing users to enter inputs, communicating with the VPM file.Both the files are freely available and can be downloaded on line on the UNECE web site: http://www.unece.org/trans/theme_forfits.html
The ForFITS user manual is also accessible on the UNECE web site: http://www.unece.org/trans/forfits_user_manual.html
-
ForFITS modelVPM file
Example of a “view” of the VPM file
CodingPurple text: input from XLS fileBlack text: variables calculated in the viewGrey text: variables calculated in another viewBlue arrows: connection variablesNAME IN CAPITAL LETTERS: base year variableFIRST word in capital letters: input over time
-
ForFITS modelXLS file
Selection sectionInputs entered in the database section are activated here
Database sectionData for new scenarios shall be entered here
Example of input tables in the XLS file
-
• Extracting tables in .txt files, readable and editable in ExcelThe visualisation as graphs and table is possible for each of the model variablesComparative results on multiple runs (e.g. to different scenarios, before and after one or
more policy interventions) can also be visualized in graphs and tables
ForFITS modelResults
Results can be visualized in several ways:
•Using the “output” views of the VPM file•With a graphical interface in the VPM file (up to 16 variables, including subscripts)
•As a table in the VPM file (any amount of subscripts and variables)
-
ForFITS modelPolicy impacts or scenarios?
ForFITS may be used to evaluate policy impacts and to consider the effect of certain assumptions, characterizing scenariosThe coupling with policies, in the case of assumptions/scenarios, has to be worked out be the user aside from the model
ForFITS provides information on transport activity, vehicles, energy use and CO2 emissions taking into account for…•Socio‐economic growth scenarios (e.g. strong vs. weak GDP and/or population growth)•Fuel cost scenarios (e.g. high vs. low oil price)•Fuel taxation, including carbon taxes (need for proper characterization)•Road pricing policies (caution needed when it is applied to portions of the network)•Assumptions/scenarios on the evolution of the cost and performance of vehicle technologies•Differentiated vehicle taxation (e.g. based on the vehicle technology)•Assumptions/scenarios related to structural changes of the transport systemsPassenger: modal shift policies, e.g. towards public transport from private vehiclesFreight: modal shifts, e.g. due structural changes in the economy (such as relevance of imports & exports) and in the logistic system (such as local vs. long‐distance sourcing)
-
Even if ForFITS has the capacity to adapt to different levels of data availability, the model does require a substantial amount of data, for:• the characterization of the transport system in the base year (historical inputs)• the definition of the context in which the transport system should evolve (projections)Information on the initial and final times, the characterization of the areas, and the selection of
the modelling approach for the powertrain choice (exogenous or endogenous), are also firm needs
Historical inputs•GDP, population•Vehicle stock: number of vehicles by powertrain, average travel and loads, average fuel consumption•New vehicle registrations: same detail used for stocks needed for the base year, 5 and 10 years earlier (data in between are taken into account with linear interpolations)
Minimum data requirements (other inputs are defined by default data and can be modified)Projections•GDP and population•Fuel prices (cost and taxation)•Vehicle shares between two and three wheelers•Pkm shares for different public transport modes (e.g. due to the construction of urban rail)•Modal shares of light road freight vehicles•Evolution of the network extension for pipelines•With endogenous powertrain selection (optional), discount rate and powertrain shares
ForFITS modelData requirements (1/3)
Need for coherence for inputs on each AREA, SERVICE, MODE, VEHICLE CLASS and POWERTRAIN
-
A wide set of default data are included in the ForFITS Excel file
ForFITS modelData requirements (2/3)
These default data are used to characterizing several parameters of the ForFITS model
They concern the following input categories:
M Data absolutely requiredCorresponding to the minimum data requirements
A Inputs expected to be introduced by the userThe default value in ForFITS is for guidance only
This category includes policy inputs that allow exploring different scenarios
B Input containing technical information (e.g. technological potential and costs by powertrain)These data may be maintained unchangedThe defaults are set on the basis of research activities involving literature reviews and statistical analyses (further information on this is provided in the relevant section of the ForFITS manual)
C Inputs on structural characteristics of the modelUnless the users acquired significant experience with the model, these inputs shall not be modified: changes to these inputs will result in significant modifications to the model behaviour
-
Full data requirements
ForFITS modelData requirements (3/3)
TIME PERIOD ANALYZED FUEL CONSUMPTION (PROJECTIONS) VEHICLE CLASSES (EXOGENOUS PROJECTIONS)
Initial and final projection times Economic & demographic data All modes but air, NMT and pipelines Vehicle shares within modes & sub-modesBase year and final year Over time Fuel consumption characteristics Personal passenger two wheelers A
Population growth M Index of performance A Personal passenger three wheelers AINITIAL CONDITIONS GDP growth M Fuel consumption characteristics by powertrain Personal passenger LDVs A
Passenger two wheelers B Personal passenger vessels AInitial transport system TRANSPORT SYSTEM CHARACTERISTICS Passenger three wheelers B Public passenger NMT A
Vehicle stock Passenger LDVs B Public passenger two wheelers AVehicles Transport system over time Passenger vessels B Public passenger three wheelers A
Number of active vehicles M Passenger Passenger large road B Public passenger LDVs APowertrain group shares in each vehicle class M Area characterization M Passenger rail B Public passenger vessels A
Travel Passenger transport system index A Freight two wheelers B Public passenger large road AAnnual travel per vehicle M Environmental culture index A Freight three wheelers B Public passenger rail A
Load Freight Freight LDVs B Air passenger AVehicle load M Constant parameters Freight vessels B Medium road freight vehicles A
Fuel consumption Haul length B Freight large road B Heavy road freight vehicles AVehicle fuel consumption M Vehicle capacity ratios B Freight rail B Freight two wheelers AFuel consumption gap by powertrain group C Load factor ratios B Freight three wheelers A
New vehicle registrations Hauls per vehicle ratios B Air transport Freight LDVs ABase year Base year Fuel consumption per km A Freight vessels (maritime/deep sea) A
Vehicles Shares of tonnes lifted by good type M Freight rail ANewly registered vehicles M Shares of tonnes lifted by transport distance Pipelines Freight air APowertrain group shares in each vehicle class M Short & medium distance / all A Energy consumption per km A Freight pipelines A
Fuel consumption Short distance / short + medium AVehicle fuel consumption M Very large distance / large + very large A TECHNOLOGY CHOICE (PROJECTIONS) OTHER INPUTS (PROJECTIONS)Fuel consumption gap by powertrain group C Shares of tonnes lifted by transport zone A
Base year-5 Over time Powertrain technology choice switch PipelinesVehicles Shares of tonnes lifted by transport zone A Choice switch (endogenous / exogenous) M Distance travelled/network extension M
Newly registered vehicles M Tonnes lifted by haul distance A Discount rate MPowertrain group shares in each vehicle class M Shares of tonnes lifted by good type A Crew costs
Fuel consumption Shares of tonnes lifted by large-freight sub-mode A A) EXOGENOUS TECHNOLOGY CHOICE INPUTS Crew cost per day (over time) AVehicle fuel consumption MFuel consumption gap by powertrain group C PRICES AND TAXES (PROJECTIONS) Powertrain technology & ICE fuel: shares DEMAND GENERATION PARAMETERS
Base year-10 Powertrain technology MVehicles Fuel prices and taxes ICE fuel M Passenger
Newly registered vehicles M Drivers as fucntions of GDP per capitaPowertrain group shares in each vehicle class M Prices B) ENDOGENOUS TECHNOLOGY CHOICE INPUTS Personal passenger vehicles (PPV) per capita C
Fuel consumption Fuel price (before taxes) M Pkm share on PPV in PPV + public transport CVehicle fuel consumption M Taxes Powertrain technology & ICE fuel: availability Pkm share on air mode in total pkm CFuel consumption gap by powertrain group C Fuel taxation A Powertrain technology A People per active bike C
ICE fuel A Personal vessels (boats) per capita CEconomic & demographic data Road pricing Vehicle costs by powertrain group A Environmental culture multipliers
Base year Cost of vehicle-km A Personal passenger vehicles (PPV) per capita CPopulation M VEHICLE & POWERTRAIN COSTS (PROJECTIONS) Personal passenger LDVS CGDP M FUEL CHARACTERISTICS (PROJECTIONS) Pkm share on PPV in PPV + public transport CGDP deflator M All modes but air, NMT and pipelines Pkm share on air mode in total pkm C
Fuel characteristics: CO2 emission factors Vehicle costs by powertrain group People per active bike CCrew costs Tank-to-wheel [TTW] A Passenger modes A Vehicle travel cost multipliers
Crew cost per day (base year) B Well-to-tank [WTT] A Freight modes A Personal passenger vehicles (PPV) per capita CPersonal passenger LDVS C
Air transport People per active bike CAir vehicle cost (base year) B Personal vessels (boats) per capita CAir vehicle cost (over time) B Elasticities as functions of GDP per capita
Annual personal vehicle travel to cost of driving CMODAL SHARES (EXOGENOUS PROJECTIONS) Pkm on public transport vehicles to cost of driving C
Pkm on air vehicles to cost of driving CModal shares Freight
Modal shares between 2- and 3-wheelers M Drivers as fucntions of GDP per capitaPkm shares in public transport modes M Share of light vehicles in total road freight CVehicle shares in light road freight modes M Elasticities
Tkm to the cost of tkm CLoad factors to the cost of tkm C
-
ForFITS users
Who may be interested in using ForFITS?
•Someone willing to understand the transport system he is concerned about (typically a geographical region), its impacts in terms of energy consumption and CO2 emissions•Someone having access to a sufficient amount of statistical information•Someone having some degree of specific competence (transport, transport policies, energy policies, environmental policies)•Someone having sufficient financial means to support his/her ambitions•Someone from…
• a national administration and/ore a local government• an Inter‐Governmental Organization• a Non‐Governmental Organization• an Academic institution and/or a consulting company• the industry sector (company/corporation, industry association)
-
Links and contact information
Links
Model download/UNDA project pagehttp://www.unece.org/trans/theme_forfits.html
User manual, including methodological informationhttp://www.unece.org/trans/forfits_user_manual.html
Contact [email protected]@unece.org