focused run for sap solution manager - sap help portal · pdf filemaster guide document...
TRANSCRIPT
Master Guide
Document Version: 1.12 – 2017-11-07
CUSTOMER
Focused Run for SAP Solution Manager Feature Pack 1
2
CUSTOMER
© 2016 SAP SE or an SAP affiliate company. All rights reserved.
Focused Run for SAP Solution Manager
Typographic Conventions
Typographic Conventions
Type Style Description
Example Words or characters quoted from the screen. These include field names, screen titles,
pushbuttons labels, menu names, menu paths, and menu options.
Textual cross-references to other documents.
Example Emphasized words or expressions.
EXAMPLE Technical names of system objects. These include report names, program names,
transaction codes, table names, and key concepts of a programming language when they
are surrounded by body text, for example, SELECT and INCLUDE.
Example Output on the screen. This includes file and directory names and their paths, messages,
names of variables and parameters, source text, and names of installation, upgrade and
database tools.
Example Exact user entry. These are words or characters that you enter in the system exactly as
they appear in the documentation.
<Example> Variable user entry. Angle brackets indicate that you replace these words and characters
with appropriate entries to make entries in the system.
EXAMPLE Keys on the keyboard, for example, F2 or ENTER .
Focused Run for SAP Solution Manager
Document History
CUSTOMER
© 2016 SAP SE or an SAP affiliate company. All rights reserved. 3
Document History
Caution
Before you start the implementation, make sure that you have the latest version of this document that is
available at https://help.sap.com/viewer/p/FRUN.
Version Date Change
1.0 2016-10-21 Initial Version for Focused Run 1.0
1.01 2016-10-31 Minor changes
1.1 2017-05-12 Update for Focused Run 1.0 FP01
1.11 2017-06-08 Minor changes
1.12 2017-11-03 Added chapter 4.1 Overview Focused Run Software Stack
Added chapter 4.7 Prepare SLD Namespace
Update chapter 4.6.6 Implementing SAP Notes
Adjusted chapter numbering for Preparing NetWeaver Basic Operation
onwards and onwards
Update chapter 5.2.6 Setup Communication with SAP Support Backbone
4
CUSTOMER
© 2016 SAP SE or an SAP affiliate company. All rights reserved.
Focused Run for SAP Solution Manager
Table of Contents
Table of Contents
1 Getting Started ................................................................................................................................ 6 1.1 About this Document ............................................................................................................................ 6 1.2 Abbreviations and Terms ...................................................................................................................... 6 1.3 Focused Run Use Cases ........................................................................................................................ 7 1.4 Focused Run Implementation .............................................................................................................. 9
2 Define Implementation .................................................................................................................. 10
3 Plan Landscape .............................................................................................................................. 11 3.1 Planning Information ............................................................................................................................ 12 3.2 Further Useful Links ............................................................................................................................. 12 3.3 Related Guides ...................................................................................................................................... 13 3.4 Important SAP Notes ........................................................................................................................... 13
4 Prepare Implementation ............................................................................................................... 14 4.1 Overview Focused Run Software Stack ..............................................................................................14 4.2 Check Installed SAP HANA Revision ..................................................................................................14 4.3 Check and Prepare Your OS for SAP HANA ....................................................................................... 15 4.4 Check and Adjust SAP HANA Parameters ......................................................................................... 15 4.5 Implementing SAP NetWeaver with Focused Run Using Up-to-Date installation process ...........16 4.6 Post Installation of SAP NetWeaver ABAP Server for Focused Run Usage ....................................16
4.6.1 Create Productive client ......................................................................................................16 4.6.2 Focused Run Administration User...................................................................................... 17 4.6.3 Checking and Adjusting SAP NetWeaver ABAP Profile Parameters ............................... 17 4.6.4 Update SAP Kernel ..............................................................................................................19 4.6.5 Update of SAPUI5 Runtime Environment ..........................................................................19 4.6.6 Implementing SAP Notes ....................................................................................................19
4.7 Prepare SLD Namespace .................................................................................................................... 20
5 Implementing Focused Run 1.0 ..................................................................................................... 21 5.1.1 Preparing NetWeaver Basic Operation .............................................................................. 21 5.1.2 Configuring Usage of Web Based Front-End Application URLs ....................................... 21 5.1.3 Setup Load Balancing ......................................................................................................... 22
5.2 Configuration of Focused Run Application Foundation ................................................................... 23 5.2.1 Preparing UI Environment .................................................................................................. 23 5.2.2 Creating Technical Users for Application Foundation ..................................................... 23 5.2.3 Preparing Simple Diagnostics Agent Distribution ........................................................... 23 5.2.4 Simple System Integration................................................................................................. 24 5.2.5 Landscape Management Database ................................................................................... 26 5.2.6 Setup Communication with SAP Support Backbone ...................................................... 30 5.2.7 Setup Application Foundation Background Processing ................................................... 31 5.2.8 Data Collection Framework and Alert Calculation ........................................................... 32 5.2.9 Content Update ................................................................................................................... 32 5.2.10 Activate System Monitoring for Focused Run System .................................................... 33
Focused Run for SAP Solution Manager
Table of Contents
CUSTOMER
© 2016 SAP SE or an SAP affiliate company. All rights reserved. 5
5.2.11 Self-Monitoring .................................................................................................................... 33
6 Business Scenarios of Focused Run ............................................................................................ 34 6.1 Advanced System Management ........................................................................................................ 34
6.1.1 Preparing Use-Case ............................................................................................................ 34 6.1.2 Setup Application Specifics................................................................................................ 34 6.1.3 Background Jobs for ASM .................................................................................................. 35
6.2 Advanced User Monitoring ................................................................................................................. 36 6.2.1 Preparing Use-Case ............................................................................................................ 36 6.2.2 Real User Monitoring Specific Setup Steps ...................................................................... 36 6.2.3 Background Jobs for AUM.................................................................................................. 36
6.3 Configuration and Security Analytics ................................................................................................ 37 6.3.1 Preparing Use-Case ............................................................................................................ 37 6.3.2 Additional Configuration for Configuration Validation .................................................... 37
6.4 Advanced Integration Monitoring ....................................................................................................... 37 6.4.1 Preparing Use-Case ............................................................................................................ 37 6.4.2 Background Jobs for AIM ................................................................................................... 38
7 Appendix ....................................................................................................................................... 39 7.1 OData and SICF services activated by STC01 task lists ................................................................... 39
7.1.1 SAP_GW_FIORI_ERP_ONE_CLNT_SETUP with Variant SAP&FRUN_INIT .................... 39 7.1.2 SAP_FRUN_SETUP_USECASE with variant SAP&FRUN_ASM ...................................... 41 7.1.3 SAP_FRUN_SETUP_USECASE with variant SAP&FRUN_AUM ...................................... 42 7.1.4 SAP_FRUN_SETUP_USECASE with variant SAP&FRUN_AEM ...................................... 43 7.1.5 SAP_FRUN_SETUP_USECASE with variant SAP&FRUN_CSA ....................................... 43 7.1.6 SAP_FRUN_SETUP_USECASE with variant SAP&FRUN_AIM ....................................... 43
6
CUSTOMER
© 2016 SAP SE or an SAP affiliate company. All rights reserved.
Focused Run for SAP Solution Manager
Getting Started
1 Getting Started
1.1 About this Document
Purpose
This Master Guide is the starting point for the technical implementation of Focused Run for SAP Solution Manager
(Focused Run). It mainly contains cross-scenario implementation information.
Use the Master Guide to get an overview of Focused Run, its software units, and its scenarios from a technical
perspective. This document also guides you to design your system landscape and to define your implementation
planning. It also references related documents that include further details, like:
• Installation guides for single software units
• SAP Notes
• Configuration documentation
• SAP Library documentation
Note
You find the latest information about the technical implementation of Focused Run and the latest
installation and configuration guides on SAP Service Marketplace at
https://help.sap.com/viewer/p/FRUN.
We strongly recommend that you follow these documents. They are regularly updated.
Constraints
The primary focus of this master guide is to introduce the overall technical implementation of Focused Run, rather
than to deeply explain every single component. This means that additional software dependencies might exist
without being mentioned explicitly in this document. You can find more information on component-specific
software dependencies in the corresponding installation guides.
1.2 Abbreviations and Terms
Abbreviation or short form Long form
Focused Run Focused Run for SAP Solution Manager
AUM Advanced User Monitoring
ASM Advanced System Management
CSA Configuration and Security Analytics
Focused Run for SAP Solution Manager
Getting Started
CUSTOMER
© 2016 SAP SE or an SAP affiliate company. All rights reserved. 7
Abbreviation or short form Long form
RUM Real User Monitoring
TA Trace Analysis
SysMon System Monitoring
SysAna System Analytics
ITCal IT Calender
WMM Work Mode Management
SAM Service Availability Management
EWA SAP Early-Watch Alert
SCN SAP Community Network
CA APM CA Application Performance Management
SLD System Landscape Directory
SLDR SLD Data Router
SDA Simple Diagnostics Agent
JRE Java Runtime Environment
SSI Simple System Integration
LMDB Landscape Management Database
1.3 Focused Run Use Cases
Focused Run provides improved solution operations features relevant for the run phase of a managed system
landscape.
The main use cases of Focused Run and their corresponding key areas are as follows:
Use Case Description
Advanced User Monitoring (AUM) Monitoring of user experience across system and
technology stacks. In this use case the functionality
of Real User Monitoring (RUM) and Trace Analysis
(TA) is bundled. With RUM, you can monitor real user
requests across systems and technologies. It
provides correlation and assembling of different
server side measured data to end-to-end user
scenarios. Data is provided by SAPGUI and SAPUI5
clients, SAP Gateway and SAP ABAP Systems. RUM
covers performance as well as utilization
measurement also called Web Analytics. The TA
application is also part of this use case to support
8
CUSTOMER
© 2016 SAP SE or an SAP affiliate company. All rights reserved.
Focused Run for SAP Solution Manager
Getting Started
Use Case Description
root cause analysis for performance and exception
issues in end-user scenarios.
Advanced System Management (ASM) Effectively and efficiently manages many systems,
databases and hosts. Focus is on functionality such
as:
• System Monitoring (SysMon)
• System Analytics (SysAna)
• IT Calendar (ITCal)
• Work Mode Management (WMM)
• Service Availability Management (SAM) and
• SAP Early-Watch Alert (EWA)
It covers the complete scope of managed system
types based on SAP and non-SAP technologies.
Configuration and Security Analytics (CSA) Analytics of configuration and security settings
across systems and technologies. Allows to browse
and investigate high volumes of configuration items
in complex system landscapes. Allows to validate
technical and security configuration settings against
customer-specific target configuration templates. It
supports configuration settings of system, database
and host.
Advanced Event and Alert Management (AEM) Provides enhanced management capabilities for
events and alerts based on monitoring use cases as
Advanced User Monitoring and/or Advanced System
Monitoring. Comes with efficient and mass volume
enabled Alert Dashboards, Alert Inbox and Alert
Detail displays.
More Information
Find all information about Focused Run 1.0 use cases in the following:
• SAP Help Portal
SAP Help Portal bundles access to SAP product documentation and related information, such as SAP Notes,
product availability information, as well as community content.
For Focused Run 1.0 you can access the Help Portal at http://help.sap.com/
• SAP Community Network (SCN)
The SCN is organized into more than 300 “spaces”, which support small, self-contained communities. These
communities are typically focused around a topic, an SAP product, or an industry. Each space contains a
complete set of social networking tools including a discussion forum, a blogging area, and an area where you
can collaborate on documents and publish them.
As a logged-on member, you can go to any space in the SCN landscape. You can also visit and follow a
particular set of spaces that reflect your particular range of interests, where members who share your
interests are likely to contribute.
SCN spaces are where you get the latest news from SAP and the community, interact with your peers, earn
Focused Run for SAP Solution Manager
Getting Started
CUSTOMER
© 2016 SAP SE or an SAP affiliate company. All rights reserved. 9
points for your contributions, and establish reputation as being an expert on certain topics
You access the SCN at http://scn.sap.com/
1.4 Focused Run Implementation
The implementation of Focused Run requires you to address the following items, described in detail in the next
chapters:
1. Define implementation (such as scope, hardware and software requirements, release restrictions)
2. Plan landscape (for the relevant use cases)
3. Check installed SAP HANA revision
4. Install and prepare the SAP NetWeaver ABAP system (including Focused Run add-on)
5. Configure the Focused Run Application Foundation
6. Configure the relevant Focused Run use cases
10
CUSTOMER
© 2016 SAP SE or an SAP affiliate company. All rights reserved.
Focused Run for SAP Solution Manager
Define Implementation
2 Define Implementation
During an implementation project, take several aspects into account to make the informed decisions. Here the
major aspects:
Aspect Description Further Information
Scope and Requirements You determine the scope of your
Focused Run implementation
For more information see Focused
Run Use Cases [page 7]
Landscape Planning You determine the system
landscape and consider the
landscape-relevant aspects
concerning your required use
case.
Hardware and Software
Prerequisites
Check the required minimum SAP
NetWeaver ABAP version
SAP Note 2354930
Check the required minimum
revision of the installed SAP HANA
For more information see Check
Installed SAP HANA Revision
[page 14]
Check the hardware sizing
required for your Focused Run
implementation
The recommended hardware
sizing will be provided by your
implementation partner as part of
the license proposal
Security Planning You plan the user management
and infrastructure security
For more information see Focused
Run Security Guide
Release Restrictions Check SAP Notes for any release
restrictions
Focused Run for SAP Solution Manager
Plan Landscape
CUSTOMER
© 2016 SAP SE or an SAP affiliate company. All rights reserved. 11
3 Plan Landscape
A Focused Run landscape consists of components as shown in following picture.
The following components are deployed in the landscape
• Focused Run System (running on SAP NetWeaver ABAP on SAP HANA)
• (optional) Load Balancer to distribute http(s) traffic between multiple processing instances. The usage of a
load balancer is strongly recommended for productive usage. The traffic consists of inbound data streams
and/or end-user communication.
• (optional) HTTP Proxy to forward data from the administration network to managed system network, the
proxy is not required if direct communication from Focused Run system to all host agents on hosts in the
managed system network on physical / virtual hostname and port 1128 (http) or 1129 (https) is possible.
• (optional) HTTP Reverse Proxy for sending data from (unsecure and/or untrusted) managed system network
areas to Focused Run system. The reverse proxy is required to separate the network segments with a high
security level and also for the data separation in Focused Run. A Focused Run end-user data access
authorization concept is only possible if the metrics are sent by different Reverse Proxy servers.
• (optional) Customer Management Server with the following components deployed:
o (optional) CA Application Performance Management (CA APM) is a 3rd party product. The software
component is not part of the Focused Run installation, but is available for all customers with a valid SAP
maintenance contract as part of the SAP Solution Manager installation. In Focused Run CA APM is only
utilized to collect available Bytecode Injection Metrics (such as for JRE engines or .NET runtime). In
networks without components utilizing CA APM native instrumentation, this component is not required.
o (optional) SLD Data Router (SLDR) is used to forward the SLD data supplier content to multiple target
systems (e.g. SLD server in SAP NetWeaver Java or LMDB in Focused Run). If the landscape data is only
collected for Focused Run, without the need to supply any SAP Solution Manager, SAP NetWeaver PI or
other components utilizing SLD data, the SLD data supplier of all systems can be connected directly to
the reverse proxy or load balancer of the Focused Run System
• SAP Host Agent is part of each SAP system installation and must be deployed on each host, which should be
managed by Focused Run.
12
CUSTOMER
© 2016 SAP SE or an SAP affiliate company. All rights reserved.
Focused Run for SAP Solution Manager
Plan Landscape
• Simple Diagnostics Agent is installed as add-on to the SAP Host Agent, during the connection process to the
Focused Run system. With the help of the Simple Diagnostics Agent most of the data needed for Focus Run
use cases is collected and streamed to the Focused Run system.
• Managed Systems and Managed Databases are not part of the Focused Run installation or deployment
scenario, but as those are in scope and relevant as objects, for which Focused Run provides operations
capabilities, the distribution of those systems within the defined customer network areas is of importance and
shall be planned.
• Focused Run does perform data exchange with SAP Support Portal for various use cases, therefore a
connection to SAP Support Portal is needed.
• The LMDB component within Focused Run always require an operational SLD, in order to perform a CR
content synchronization. In other words, in case the SLD data supplier information is only relevant towards
Focused Run, the SLD data suppliers shall report to LMDB in Focused Run, Nevertheless, you have to operate
an SLD server (in a NetWeaver Java system), to achieve the CR content synchronization.
3.1 Planning Information
For more information about planning topics, not covered in this guide, refer to the following content:
Content Location on SAP Service Marketplace
Latest versions of Focused Run
guides
https://help.sap.com/viewer/p/FRUN
Released platforms and technology-
related topics such as maintenance
strategies and language support
https://service.sap.com/platforms
To access the Platform Availability Matrix directly, enter
https://support.sap.com/pam
Performance https://www.sap.com/solution/benchmark/sizing/performance.html
Information about Support Package
Stacks, latest software versions and
patch level requirements
https://support.sap.com/sp-stacks
Information about Unicode
technology
https://go.sap.com/community/topic/internationalization-and-
unicode.html
3.2 Further Useful Links
The following table lists further useful links on SAP Service Marketplace:
Content Location on SAP Service Marketplace
Information about creating error messages https://support.sap.com/incident
SAP Notes search https://support.sap.com/notes
Focused Run for SAP Solution Manager
Plan Landscape
CUSTOMER
© 2016 SAP SE or an SAP affiliate company. All rights reserved. 13
Content Location on SAP Service Marketplace
SAP Software Distribution Center (software
download and ordering of software)
https://support.sap.com/swdc
3.3 Related Guides
You can find more information about the prerequisite components in the following documents:
Title Location
Guides for SAP NetWeaver 7.5 https://help.sap.com/viewer/p/SAP_NETWEAVER_750
End- to-End Implementation
Roadmap for SAP NetWeaver AS
ABAP
https://service.sap.com/~sapidb/011000358700000488912013E.pdf
Technical Operations Guide for
SAP NetWeaver
http://help.sap.com/saphelp_nw75/helpdata/en/48/0dd91ad6013d1b
e10000000a42189d/frameset.htm
3.4 Important SAP Notes
Read the following SAP Notes before you start the installation. These SAP Notes contain the most recent
information on the installation, as well as corrections to the installation documentation.
Make sure that you have the up-to-date version of each SAP Note, which you can find on SAP Support Portal at
http://support.sap.com/notes.
SAP Note Number Title Description
2354930 Release strategy for the ABAP add-on Focused
Run
Release and Installation Information
for Focused Run 100
2369217 Release restrictions for Focused Run 1.0 Overview on limitations
2381861 Release Information Note for Focused Run 1.0
for Solution Manager
Recent important observations and
corrections to be implemented.
14
CUSTOMER
© 2016 SAP SE or an SAP affiliate company. All rights reserved.
Focused Run for SAP Solution Manager
Prepare Implementation
4 Prepare Implementation
4.1 Overview Focused Run Software Stack
SAP HANA
• SAP HANA SPS12 with Revision 122.05 or higher
SAP Netweaver ABAP - Software Components
Component Release Req. min. SP Level Component Description
SAP_BASIS 750 0006 SAP Basis Component
SAP_ABA 750 0006 Cross-Application
Component
SAP_GWFND 750 0006 SAP Gateway Foundation
SAP_UI 751 0001 User Interface
Technology
ST-PI 740 0006 SAP Solution Tools Plug-
In
SAP_BW 750 0006 SAP Business Warehouse
MDG_FND 749 0006 MDG Foundation
SAP_BS_FND 748 0005 SAP Business Suite
Foundation
WEBCUIF 748 0005 SAP Web UI Framework
FRUN 100 0001 SAP Focus RUN Tool
ST-A/PI 01S_731 0002 Servicetools for SAP
Basis 731
SAP Netweaver ABAP - UI5 Runtime
• SAPUI5 Library 1.44.7 or higher
4.2 Check Installed SAP HANA Revision
The SAP HANA System is considered as a prerequisite.
Focused Run for SAP Solution Manager
Prepare Implementation
CUSTOMER
© 2016 SAP SE or an SAP affiliate company. All rights reserved. 15
Make sure that your implement HANA SPS12 Revision 122.05 or higher (>=1.00.122.05), using one of the
following:
• HANA Cockpit
(https://help.sap.com/saphelp_hanaplatform/helpdata/en/73/c37822444344f3973e0e976b77958e/cont
ent.htm)
• HANA Studio
(https://help.sap.com/saphelp_hanaplatform/helpdata/en/bd/23f2d8bb57101480b0eedc2bf5fcce/conten
t.htm)
4.3 Check and Prepare Your OS for SAP HANA
Please ensure, that the recommendation of note 2131662 - "Transparent Huge Pages (THP) on SAP-HANA-
servers" are applied to all HANA database servers.
To optimize the operating system environment for high performance environment, apply the parameters as
described in note 2382421 - " Optimizing the Network Configuration on HANA- and OS-Level for SPS10 and
Higher"
4.4 Check and Adjust SAP HANA Parameters
On UNIX, you can find out the number of logical cores, or the number of cores per socket, defined on your HANA
system, using the OS command lscpu, like explained here:
https://help.sap.com/saphelp_hanaplatform/helpdata/en/1b/3599dd8ba441c99f3118ca90c94364/content.ht
m
Use these numbers to maintain the following HANA parameters in the relevant files, as described here:
https://help.sap.com/saphelp_hanaplatform/helpdata/en/3f/1a6a7dc31049409e1a9f9108d73d51/content.htm
Alternatively, use the SAP HANA Administration Console to adjust the following parameters, by navigating to the
tab Configuration and:
global.ini
[execution]
default_statement_concurrency _limit = <number of logical cores on HANA server / 2>
max_concurrency = <number of logical cores on HANA server / 2>
max_concurrency_hint = <number shall be lower or equal to the number of cores per socket>
[parallel]
num_cores = <same value as max_concurrency_hint>
[persistence]
max_gc_parallelity = <number of logical cores on HANA server / 2>
Note: Adjusting this values, requires a restart.
16
CUSTOMER
© 2016 SAP SE or an SAP affiliate company. All rights reserved.
Focused Run for SAP Solution Manager
Prepare Implementation
4.5 Implementing SAP NetWeaver with Focused Run Using Up-to-Date installation process
Using the up-to-date installation process, you can easily install the SAP NetWeaver ABAP 7.5 system (on SAP
HANA), including the necessary add-ons.
Plan the desired installation target using the maintenance planner at
https://apps.support.sap.com/sap/support/mp, to install the SAP NetWeaver ABAP system along with a
required Support Package stack and the ABAP Add-Ons in one implementation run.
All details can be found in the guide appropriate to your operating system, which you can find on this download
page. Note: Take care to select SAP HANA as Database and ABAP as Technical Stack.
During Installation of Focused Run 1.0 FP01 the following must be selected:
• Select NetWeaver 7.5 with Support Package 6
• Choose "Install or maintain Add-on"
• Select Focused Run 1.0
• Select your OS combination with SAP HANA database depended files. Follow the SAP NetWeaver and current
installation instructions to download and install the system based on the files selected in Maintenance
Planner.
4.6 Post Installation of SAP NetWeaver ABAP Server for Focused Run Usage
4.6.1 Create Productive client
The use of client 001 is not supported in Focused Run. Therefore, before proceeding with the Focused Run
configuration below, Detailed information regarding client copy is available at
https://help.sap.com/viewer/4a368c163b08418890a406d413933ba7/7.5.6/en-
US/4d7ce15219a00f88e10000000a42189b.html.
Create a new productive client and perform a local client copy as following:
• Add following profile parameter in RZ11: login/no_automatic_user_sapstar = 0
• Restart the Focused Run ABAP instances
• Login into the Focused Run system and create new client using transaction SCC4
• Login into the created client, using user: SAP*, and standard password: PASS
• Perform a copy into this new client, using transaction SCCL, and profile SAP_CUST, from source client 000
• Delete profile parameter login/no_automatic_user_sapstar
Proceed with the next configuration activities, using this created production client.
Focused Run for SAP Solution Manager
Prepare Implementation
CUSTOMER
© 2016 SAP SE or an SAP affiliate company. All rights reserved. 17
4.6.2 Focused Run Administration User
Please perform initial configuration of Focused Run with an administration user. The necessary privileges are
described in Security Guide chapter Proposal for Setup User.
4.6.3 Checking and Adjusting SAP NetWeaver ABAP Profile Parameters
Information on how to maintain SAP NetWeaver ABAP parameters can be found at:
https://help.sap.com/saphelp_nw75/helpdata/en/5a/860a509ece466ce10000000a423f68/content.htm
The parameter values specified below are minimum requirements for the Focused Run installation. All
recommendations are valid for usage of Zero Administration Memory Management (SAP Note 2085980 - New
features in memory management as of Kernel Release 7.40).
Note:
The parameter recommendations are a starting point for a midsize Focused Run installation. Based on the
individual scenarios a larger scaling of the parametrization might be necessary.
Adjust the amount of Dialog and Batch Work Processes on each ABAP instance. Recommendation is to operate at
least 50 DIA and 25 BTC work processes per instance. Further details about work process configuration, number
of work processes and dependencies, refer to SAP notes 2190597, 39412 and 9942.
Finally restart the Focused Run ABAP system, in case you adjusted some parameters.
Parameter Recommendation Remark
icm/host_name_full Set to full qualified hostname of the
application server. See also
http://help.sap.com/saphelp_nw70ehp2
/helpdata/en/48/3c5d3df7e771b9e1000
0000a421937/frameset.htm
icm/server_port_X Typical values:
• icm/server_port_0 =
PROT=HTTPS, PORT=443,
TIMEOUT=300,
PROCTIMEOUT=300
• icm/server_port_1 =
PROT=HTTP, PORT=80,
TIMEOUT=300,
PROCTIMEOUT=300
• icm/server_port_2 =
PROT=SMTP,PORT=25000,
TIMEOUT=180
Set up one HTTP, HTTPS and SMTP port
icm/max_conn 8.000 SAP note 2007212
login/system_client <productive client number> Provide the productive client number. See
chapter 4.5.1 Create Productive client.
18
CUSTOMER
© 2016 SAP SE or an SAP affiliate company. All rights reserved.
Focused Run for SAP Solution Manager
Prepare Implementation
Parameter Recommendation Remark
PHYS_MEMSIZE >= 20.480 SAP Note 2085980
The profile parameter PHYS_MEMSIZE
determines how much of the entire main
memory is to be used by the SAP system.
The parameter is entered during
installation in accordance with the entry.
The standard value for PHYS_MEMSIZE is
the size of the main memory [RAM].
abap/shared_objects_size_MB
>=1.025
abap/buffersize 8.000.000
rdisp/elem_per_queue 4.000
rdisp/max_wprun_time 3.600
rdisp/tm_max_no >=8.000
rsdb/prefer_join_with_fda 0 Disable fast data access for HANA to
avoid inconsistencies. See SAP Note
2037385
dbs/hdb/deferred_lob_writing 0 Add this parameter to disable the
deferred LOB writing
rsdb/ntab/entrycount 1.500.000
rsdb/cua/buffersize 70.000
rsdb/obj/max_objects 80.000
rsdb/esm/buffersize_kb 8.192
rsdb/otr/max_objects 5.000
rsdb/otr/buffersize_kb 8.192
sap/bufdir_entries 15.000
zcsa/system_language E Only English is supported as logon
language for Focused Run
zcsa/second_language E
http/security_context_cache_size 8.000
ssl/client_ciphersuites 902 More details about ciphersuites can be
found in Note 510007
Focused Run for SAP Solution Manager
Prepare Implementation
CUSTOMER
© 2016 SAP SE or an SAP affiliate company. All rights reserved. 19
4.6.4 Update SAP Kernel
Kernel 7.45 64-BIT UNICODE SP320
4.6.5 Update of SAPUI5 Runtime Environment
Install SAPUI5 1.44.7 as described in SAP Notes 2424070.
Note:
You can look-up under (Version: 1.44) the full version of the currently installed SAPUI5 component, by opening the
following URL on your Focused Run system: http(s)://<fqdn-
hostname>:<port>/sap/public/bc/ui5_ui5/index.html
To display this URL page, first activate the associated service, by:
1. Logon to your SAP ABAP system
2. Start transaction SICF
3. In the filter screen provide as Service Name ui5_ui5
4. Press Execute (F8)
5. Search for /sap/public/bc/ui5_ui5/
6. Right click on the service name and select "Activate Service". Confirm the activation by click on "Yes" in
confirmation dialog.
4.6.6 Implementing SAP Notes
Please implement the following SAP Notes in your Focused Run system using transaction SNOTE (see
http://help.sap.com/saphelp_nw75/helpdata/en/48/b41a66fc096ff4e10000000a42189b/frameset.htm for
background information).
• 2401534 - FilterBarValueHelp: Support EXIT via closing window
• 2380644 - Performance metric not working in FRUN (Attention: manual post-activity needed)
• 2477938 - MAI Configuration fails with: "Error An exception has occurred that was not caught. when retrieving
results from parallel task
• 2478062 - Correct link to Advanced Monitoring in Fiori Launch Pad
• 2471053 - Advanced Integration Monitoring (FRUN FP01) - General corrections
• 2478067 - Fiori Setup: Activate odata services for identical service names
• 2460338 - Correction for Unified Rendering SAP_UI NW751 TCI 005
• 2481546 - No Agent Configuration generated for Introscope metrics
• 2414364 - Focused Run Solution Manager - RCD - The Manual Content Upload is not working
• 2486584 - Fehler im Report SRSM_AMA_UPLOAD_BINARY bei Ausführung des externen Kommando
SAPCAR
• 2490246 - Problem with deleted metrics/events/alerts
20
CUSTOMER
© 2016 SAP SE or an SAP affiliate company. All rights reserved.
Focused Run for SAP Solution Manager
Prepare Implementation
• 2506476 - Blue and Black metric in system monitoring
• 2503569 - RCSU_MANUAL_UPLOAD error message FRUN
• 2509512 - Self Monitoring: System view gives a dump when all systems are displayed
• 2520332 - Global alert consumer settings not configured correctly
• 2524385 - Activity "Activate System" within automatic system configuration does not show termination
message
• 2485500 - System Analytics: Corrections for FRUN FP01
• 2548713 - Wrong date format displays in Alert List Table
4.7 Prepare SLD Namespace
Before enabling the landscape management database (LMDB), you must provide the latest CIM Model and SAP
CR Content from SAP Support Portal in an empty SAP Netweaver Java SLD system. You can use any existing
SLD, elsewise there is no need a dedicated SLD. Important is, that the namespace used in the SLD system must
not contain any data sent by SLD data suppliers, therefore it is recommended to create a new namespace in the
desired SLD (e.g. "crref") and update the CIM Model and CR Content to the latest available version inside this
namespace.
The update of this is described in SAP Note "669669 - Update of SAP System Component Repository in SLD".
Updating the CIM Model and CR Content in this SLD namespace is a continuous task, which must be performed at
least every 3 months.
Focused Run for SAP Solution Manager
Implementing Focused Run 1.0
CUSTOMER
© 2016 SAP SE or an SAP affiliate company. All rights reserved. 21
5 Implementing Focused Run 1.0
5.1.1 Preparing NetWeaver Basic Operation
If not already performed, as part of the SAP NetWeaver installation procedure (See 4.4 Implementing SAP
NetWeaver with Focused Run Using Up-to-Date installation process), make sure to have completed the
Automated Initial Setup, with the task list SAP_BASIS_SETUP_INITIAL_CONFIG, as described in
https://websmp103.sap-ag.de/~sapidb/012002523100010638182014E.
Aditionally to what is needed for any other SAP NetWeaver ABAP system, in the context of Focused Run you need
to run the following task. Therefore:
1. Log on to your SAP ABAP system.
2. Start transaction: STC01
3. On the Task Manager for Technical Configuration screen, insert SAP_BASIS_SETUP_INITIAL_CONFIG in the
Task List field.
4. Press Generate Task List Run (F8)
5. Press Skip All Tasks (F7)
6. Enable task: BGRFC - Create bgRFC Supervisor Destination (SBGRFCCONF)
7. Press Start/Resume Task List Run in Dialog (or in Background).
Once the task list run has been finished successfully, green lights appear in the Status column. In case of errors,
perform an error analysis using the task documentation provided for each task.
As Focused Run applications makes high volume usage of application log, ensure, that a proper housekeeping for
the application log is in place. SAP Note 195157 contains the required information about the necessary steps to
achieve this, for Focused Run it is sufficient to delete entries already due.
5.1.2 Configuring Usage of Web Based Front-End Application URLs
For the usage of web based applications in Focused Run, the URLs to jump between applications or to jump from
SAPGUI to browser are generated automatically (see
http://help.sap.com/saphelp_nw75/helpdata/en/48/6a82a684f4350ce10000000a42189d/content.htm for
background information).
To ensure that all URLs are using the correct hostname and port (ICM or SAP Web Dispatcher) the following
configuration must be entered in table HTTPURLLOC (via transaction SE16). More detailed information is
provided at
http://help.sap.com/saphelp_nw75/helpdata/en/48/6b380633f0350ce10000000a42189d/frameset.htm
o Client: productive client
o SORT_KEY: 0100
o PROTOCOL: HTTPS
22
CUSTOMER
© 2016 SAP SE or an SAP affiliate company. All rights reserved.
Focused Run for SAP Solution Manager
Implementing Focused Run 1.0
o APPLICATION: *
o HOST: FQDN of load balancer or central application server ICM,
o PORT: HTTPS port of load balancer or central application server ICM
5.1.3 Setup Load Balancing
In Focused Run we have several applications (including batch processing) and web services requiring resources of
the ABAP applications servers. To support separation of individual workloads, different types of load balancing for
the NetWeaver ABAP stack and even beyond are used:
• Logon Groups: for distribution of dialog workload
Dialog users can explicitly state an individual server or logon group once they enter the system. Logon groups
are defined in transaction SMLG.
• RFC Server Groups: for distribution of parallel processing activities
During execution of Focused Run high volume processing jobs, the execution is distributed via asynchronous
RFC calls. The RFC server groups can be defined in transaction RZ12
• Job Server Group (maintained in ABAP transaction SM61): for distribution of batch workload
background jobs can be scheduled using dedicated execution server groups to avoid resource conflicts using
transaction SM61. In the job scheduling UI the server group can be entered as Execution Target.
In Focused Run we differentiate the following types of workload:
• Dialog and occasional background processing (Reoccurring load)
• Continuous high frequency processing (Repetitive load)
For initial setup it is recommended to split the load across two different application server groups as follows:
Instance types Logon Groups Job Server Groups RFC Server Groups
Repetitive load STREAMING FRN_JOB_INBOUND FRN_RFC_MAI
FRN_RFC_CF
Reoccurring load PUBLIC FRN_JOB_PUBLIC (*) FRN_RFC_SDA
FRN_RFC_SSI
FRN_RFC_SRAF
(*) all jobs scheduled manually in this guide should use execution target FRN_JOB_PUBLIC. Note: The high
frequency background jobs are scheduled via API.
For productive usage of Focused Run it is recommended to provide at least two instances for each instance type
to ensure high availability of processing resources for each instance type.
Next ensure that all inbound data streaming ICF endpoints in Focused Run only use the logon group STREAMING.
This can either be done in the hardware load balancer configuration or in case of SAP Web dispatcher by assigning
the logon group streaming to all ICF services mentioned as " Inbound data streaming channels" services in section
Preparing UI Environment [20].
Focused Run for SAP Solution Manager
Implementing Focused Run 1.0
CUSTOMER
© 2016 SAP SE or an SAP affiliate company. All rights reserved. 23
5.2 Configuration of Focused Run Application Foundation
5.2.1 Preparing UI Environment
Execute task list SAP_GW_FIORI_ERP_ONE_CLNT_SETUP with Variant SAP&FRUN_INIT to prepare the UI
environment and the common used data streaming services for all Application Foundation components, by
activating OData and SICF service,
Procedure
8. Log on to your SAP ABAP system.
9. Start transaction: STC01
10. On the Task Manager for Technical Configuration screen, insert SAP_GW_FIORI_ERP_ONE_CLNT_SETUP in
the Task List field.
11. Press Generate Task List Run with Variant (CTRL+F8)
12. Choose the variant SAP&FRUN_INIT
13. Press Start/Resume Task List Run in Dialog (or in Background)
Once the task list run has been finished successfully, green lights appear in the Status column. In case of errors,
perform an error analysis using the task documentation provided for each task.
Further details about this task list, are available here:
http://help.sap.com/fiori_bs2013/helpdata/en/bf/d1b053a647e842e10000000a4450e5/frameset.htm
Note: The OData and SICF services activated by this step are listed in the Appendix.
5.2.2 Creating Technical Users for Application Foundation
Before you continue with the next steps, refer to the security guide, chapter "Technical Users", in order to create
the required technical users on the Focused Run system, including:
• Template users (named like TPL_FRN*)
• Background processing users (named like FRN_BTC*)
5.2.3 Preparing Simple Diagnostics Agent Distribution
To distribute the Simple Diagnostics Agent (SDA) automatically to all hosts connected to Focused Run, provide
the binaries of the latest Simple Diagnostics Agent version and OS relevant SAP JRE 8.1 to the Focused Run
central system. The current version of the binaries can be retrieved from SAP Support Portal as follows.
• Open the SAP Software download center (https://launchpad.support.sap.com/#/softwarecenter)
o Select tab Support Packages & Patches
o By Category
o SAP Technology Components
24
CUSTOMER
© 2016 SAP SE or an SAP affiliate company. All rights reserved.
Focused Run for SAP Solution Manager
Implementing Focused Run 1.0
o Focused Run
o Focused Run 1.0
o Downloads
o Comprised Software Component Versions
Download the latest available SDA (Simple Diagnostics Agent) and SAP JRE (Java Runtime Environment) for any
other OS, which is operated and supported in managed system landscape (including the Focused Run system
itself).
Currently the following platforms are supported:
• IBM AIX
• HP-UX on IA64
• Linux on Power BE & LE
• Linux x86_64
• Oracle Solaris SPARC
• Oracle Solaris x86
• Microsoft Windows Server on x86_64
To upload the binaries to Focused Run, run report: SRSM_AMA_UPLOAD_BINARY using transaction SA38.
1. Select Batch Upload
2. In the Pop-up select the folder, where you have downloaded all SDA and JRE files
3. Press Execute (F8)
4. After the upload of all files is finished a complete list of all SDA and JRE versions uploaded to focused Run is
displayed.
Note: At the time a new SDA version is released on the SAP Support Portal, repeat the above described procedure
for all supported OS platforms, and this before triggering a Simple Diagnostics Agent update, using the Agent
Administration application (available in the Launchpad). The current version of agent binaries uploaded in
Focused Run can be determined by running report: SRSM_AMA_UPLOAD_BINARY with option Display Content
only.
5.2.4 Simple System Integration
5.2.4.1 Enabling User Management for Back Destination Users
For user management of communication users in Focused Run, two different approaches are available.
Focused Run for SAP Solution Manager
Implementing Focused Run 1.0
CUSTOMER
© 2016 SAP SE or an SAP affiliate company. All rights reserved. 25
1. Integration with a customer user management solution, handling the user creation/update process and
returns to Focused Run only the active passwords for the created users. All user handling and configuration in
such cases shall be done in the user management solution, and in Focused Run the BAdI enhancement spots
are available for integration purposes.
2. If no appropriate user management solution is available, use the build-in solution in Simple System
Integration. To enable this solution perform the following steps:
o If not already done, create the technical user FRN_IADM_SSI, in the Focused Run system. This user has
privileges to create/change and delete users. Refer to the security guide for further details.
o Create the RFC Destination SSI_USER_ADMIN_CONNECTION to the Focused Run system itself, using the
above-created user. (Details about handling RFC destinations is available in the SAP NetWeaver
Operations guide at
http://help.sap.com/saphelp_nw75/helpdata/en/48/8965b484b84e6fe10000000a421937/content.ht
m). The following parameters must be maintained:
o Connection Type: 3
o Leave the Target Host empty
o Language: EN
o Client: <Productive Focused Run client>
o User: FRN_IADM_SSI
o Password: <Password of user FRN_IADM_SSI>
o Provide for the field Authorization for Destination the value SSI_CONF
Note: Only users with permission S_RFC_ADM will be able to maintain this RFC destination.
o Run Report P_SSI_PREPARATION in SA38 with the following parameters
26
CUSTOMER
© 2016 SAP SE or an SAP affiliate company. All rights reserved.
Focused Run for SAP Solution Manager
Implementing Focused Run 1.0
5.2.5 Landscape Management Database
Prerequisite
A SLD namespace for Focused Run CIM Model and CR Content must be prepared as described in chapter 4.6
"Prepare SLD Namespace" of this document.
Activities
Start Setup using transaction LMDB_SETUP.
• In Step 1 maintain the SLD Parameters:
o Object Server: LMDB_<SID>_<hostname of central server>
o URL: Hostname of your SLD Server
o Namespace: the namespace in SLD where the CRContent and CIM Model should be synchronized from,
please make sure, that this namespace does not contain data for Managed Systems and also that no SLD
data supplier can report to this namespace.
o User: pleas provide a user with credentials for SLD Content Sync privileges on the SLD server
• Run transaction LMDB_SETUP again. A new window will open. Go to the LMDB synchronization step. If the
content synchronization that was created before has inactive status, select it and choose Activate. A message
about CIM model version comparison will appear. Choose Yes to confirm.
Focused Run for SAP Solution Manager
Implementing Focused Run 1.0
CUSTOMER
© 2016 SAP SE or an SAP affiliate company. All rights reserved. 27
• Note: A new job SAP_LMDB_LDB_<number> is scheduled by this activity. Check the job log of the scheduled
job. If the job runs fine without errors for longer than 5 minutes, the configuration can continue.
5.2.5.1 Local Network Setup
LMDB namespaces are used to group all systems belonging to one logical network. As prerequisite for all
applications the Focused Run Managing system must be also available. Therefore, during setup of LMDB a default
namespace "LOCALNETWORK" is created. The local network can be fully utilized for all use-cases of Focused Run
where specific security or data separation requirements are not necessary.
Note
Handling of customer networks is similar to the local network. The specifics of the local network are the following:
• Namespace to represent the local network is created at the time of initial setup of LMDB with the fixed name
LOCALNETWORK.
• Communication from managed systems to Focused Run system does not require proxy or reverse proxy.
Therefore for this specific network no inbound fencing string is used.
Activities
To be able to use the LOCALNETWORK namespace, some additional input is required. To maintain the data,
please start report RLMDB_CUSTOMER_NETWORK_TOOLS using transaction SA38 and provide the following
input.
1. Edit network LOCALNETWORK, and maintain the following values
o Caption: meaningful description for the local admin network e.g. Local Network
o Customer ID: 3 character CID for the Focused Run system itself
o Data Center 1: up to 4 character ID for the data center the Focused Run system itself is running
o Proxy to Admin: Host: hostname of load balancer for the Focused Run system
o Proxy to Admin: Port: port of https or http load balancer for the Focused Run system
o Other fields: Leave them empty (do not use proxy or fencing in local network)
2. Now, activate the network LOCALNETWORK shall be activated by running the following reports in transaction
SA38 with the parameters shown below. The sapadm password provided must the password used for OS
user sapadm on all hosts of the Focused Run system.
o Run Report SSI_ADMIN_NETWORK_INITIALIZE
o Run Report SSI_ADMIN_NETWORK_ACTIVATE
28
CUSTOMER
© 2016 SAP SE or an SAP affiliate company. All rights reserved.
Focused Run for SAP Solution Manager
Implementing Focused Run 1.0
3. Finally, remind to specify once the password of the following technical users, being generated by the SSI
Configuration of the Focused Run system. Note: Do not simply use transaction SU01. Refer to the security
guide for additional details.
o FRN_LDDS_<CID>
User on Focused Run system to authenticate Data Suppliers sending SLD payloads directly to LMDB.
o FRN_LDSR_<CID>
User on Focused Run system to authenticate the SLDRs, which are forwarding received SLD payloads.
o FRN_SLDS_<CID>, also known as SLD_DS in the below report
User on SLDR to authenticate Data Suppliers sending SLD payloads, which are then forwarded to
maintained outbound connections.
o FRN_EWA_<CID>
Therefore, proceed as follow:
o Start SA38 transaction
o Run the RSSI_CHANGE_NETWORK_PASSWORD
o Select the type of User, as mentioned above
o Select the Customer ID
o Provide a new password
Note: Pay attention to avoid typos, as you type-in the password only once.
5.2.5.2 Creating Business Partner for Local Network
In Focused Run, each system has a direct relationship to one business partner in the relationship role "Customer".
Therefore also for all systems registered in the local network such a business partner must be created. In addition,
the external identification to local network must be provided to allow matching of maintained Customer IDs (CID)
to dedicated business partners.
Focused Run for SAP Solution Manager
Implementing Focused Run 1.0
CUSTOMER
© 2016 SAP SE or an SAP affiliate company. All rights reserved. 29
Activities
1. Create a new Organization using transaction BP in BP Role "Business Partner (gen.)"
2. Maintain name in tab address data.
3. Identification Numbers in tab identification
o IDType: FRUN01 (CID-Customer ID)
o Identifcation Number: 3 character CID (as maintained in step "Local Network" [24])
5.2.5.3 Registering Focused Run System in LMDB
1. Perform the Outside Discovery for all hosts of Focused Run system itself, as described in the managed
system preparation guide.
Note: Remind to also double check the SAP Host Agent version.
2. To send data to Focused Run ABAP Stack, maintain the SLD Data Supplier for the following (please refer to
Managed System Configuration Guide for detailed information):
o ABAP (RZ70, use HTTP(s) destination to send data),
o SAPStartSRV (sldreg)
o HANA (sldreg + HDBLCM)
Open transaction LMDB and check the data supplier completeness for the Focused Run ABAP system. Do not
continue if the check is not successful (missing or outdated data suppliers are reported).
30
CUSTOMER
© 2016 SAP SE or an SAP affiliate company. All rights reserved.
Focused Run for SAP Solution Manager
Implementing Focused Run 1.0
5.2.6 Setup Communication with SAP Support Backbone
In Focused Run, data exchange with SAP support portal is used for system data and license management. There
are two situations:
• All systems, managed by Focused Run, belong to the same customer number, or belong to customers of a
single Customer Competence Center (CCC). In this case, set up a single connection for that customer or
CCC, as described below.
• The systems, managed by Focused Run, belong to multiple independent customers. In this case the multiple
connection setup shall be performed, as described later, and this for each customer number of the respective
managed systems.
Single Connection for Communication with SAP Support Backbone
Creation of RFC destination SAP-OSS:
• Using transaction SM59, find RFC destination SAPOSS and perform a connection test. If it fails, adjust the
destination as required. See SAP note 33135.
• Create a S-User in the SAP support portal for the SAP customer number of the Focused Run System. Note:
The S-user requires the following authorizations:
o Maintain System Data
o Request License Keys
o Software Download
• Again, in transaction SM59, create the RFC destination SAP-OSS, by copying the previously verified SAPOSS
destination, and perform the following adjustments in this SAP-OSS RFC destination:
o Enter in “Logon & Security” the name and password of your S-user created as described above
o Check that the load distribution group of both destinations is 1_PUBLIC
o Save your changes
o Check and test the new RFC connection
• With transaction SE38, run report AI_SC_REFRESH_READ_ONLY_DATA
• Finally, using transaction AISUSER, create an entry for Focused Run user FRN_BTC_SMP and any relevant
dialog user.
Multiple individual Connections for each Customer for Communication with SAP Support Backbone
Activation of the multiple connection BADI:
• Go to transaction SE19
• Choose Enhancement Implementation: AI_SDK_SP_RFC_RP
• Edit the Enhancement Implementation and mark the flag "Implementation is active"
Focused Run for SAP Solution Manager
Implementing Focused Run 1.0
CUSTOMER
© 2016 SAP SE or an SAP affiliate company. All rights reserved. 31
• If asked provide the SSCR registration key for the object
• Active the Enhancement Implementation
Creation of RFC destinations:
• Using transaction SM59, find RFC destination SAPOSS and perform a connection test. If it fails, adjust the
destination as required. See SAP note 33135.
• Create one S-User in the SAP support portal each customer number of the systems being managed by
Focused Run. Note: The S-users require the following authorizations:
o Maintain System Data
o Request License Keys
o Software Download
• Again, in transaction SM59, create per relevant customer number, one RFC destination, by copying the
previously verified SAPOSS destination. These RFC destinations shall be named, like:
SM_SP_<Customer_Number_on_10_digits>. Each time perform also the following adjustments in these new
RFC destinations:
o Enter in “Logon & Security” the name and password of the S-user corresponding to the customer number
from the RFC destination name
o Check that the load distribution group of both destinations is 1_PUBLIC
o Save your changes
o Check and test the new RFC connection
• Finally, using transaction AISUSER, create an entry for Focused Run user FRN_BTC_SMP and any relevant
dialog user.
5.2.7 Setup Application Foundation Background Processing
Schedule the following background jobs
32
CUSTOMER
© 2016 SAP SE or an SAP affiliate company. All rights reserved.
Focused Run for SAP Solution Manager
Implementing Focused Run 1.0
Jobname ABAP Programs(s) Step User Start Time Frequency
SAP_FRN_WMM_TRIGGER WMM_TRIGGER FRN_BTC_WMM immediately every
minute
SAP_FRN_WMM_CONSTITENT
S
WMM_GENERATE_CONSTITUE
NTS
FRN_BTC_WMM 0:10 am daily
SAP_FRN_COLLECT_USAGE_D
ATA
FRUN_USAGE_UPDATE FRN_BTC_SMP 1:00am daily
SAP_FRN_SYNC_SUPPORT_P
ORTAL
Multipe Step Job with the
following steps:
1:
AI_SC_REFRESH_READ_ONLY_
DATA
2:
AI_SC_UPLOAD_SYSTEM_DAT
A
FRN_BTC_SMP 0:30am daily
SAP_FRN_CNM_NOTIFICATIO
N
CNM_SCHEDULED_NOTIFICAT
ION
FRN_BTC_CNM Immediately Hourly
SAP_FRN_AF_SCHEDULER SRAF_SCHEDULER FRN_BTC_SRA immediately Every
minute
SAP_FRN_AF_HOUSEKEEPER SRAF_LOG_HOUSEKEEPING FRN_BTC_SRA 00:30 Every day
SAP_FRN_AEM_HOUSEKEEPI
NG
AEM_DIRECTORY_HOUSEKEE
PING
FRN_BTC_AEM 01:30 daily
5.2.8 Data Collection Framework and Alert Calculation
1. Call Setup transaction MAI_TOOLS, activate the expert mode, and then go to the Administration tab.
2. Call "Maintain Configuration Parameters" and maintain the following parameters and values:
o DIRDESTGRP: FRN_RFC_MAI (RFC group to be used by DIR for configuration)
o DIRMAXPERC: 20 (Maximum percentage of available DIA WPs used by DIR)
o ECEDESTGRP: FRN_RFC_MAI (RFC group to be used by ECE for calculation)
o MAXWPSERC: 40 (Maximum percentage of available DIA WPs used by ECE)
3. Call "Schedule all MAI jobs with default variant"
4. To activate the default Work Mode settings, run Report ACR_SET_DEFAULT_GLOBAL_WM once.
5.2.9 Content Update
To ensure latest content is available in Focused Run please perform the content update as described in SAP Note
2369335 if new content is available.
Focused Run for SAP Solution Manager
Implementing Focused Run 1.0
CUSTOMER
© 2016 SAP SE or an SAP affiliate company. All rights reserved. 33
5.2.10 Activate System Monitoring for Focused Run System
Please execute the "Simple System configuration" for the Focused Run ABAP System to ensure the infrastructure
can be used for central monitoring.
5.2.11 Self-Monitoring
Configure Self-Monitoring: start mai_tools (expert mode).
Configuration: Select “Configure Central Components”
34
CUSTOMER
© 2016 SAP SE or an SAP affiliate company. All rights reserved.
Focused Run for SAP Solution Manager
Business Scenarios of Focused Run
6 Business Scenarios of Focused Run
6.1 Advanced System Management
6.1.1 Preparing Use-Case
To prepare the UI environment for this use case, execute the task list SAP_FRUN_SETUP_USECASE with variant
SAP&FRUN_ASM in transaction STC01.
Procedure
1. Log on to your SAP ABAP system.
2. Call the following transaction:
Transaction Code STC01
3. On the Task Manager for Technical Configuration screen, insert SAP_FRUN_SETUP_USECASE in the Task
List field.
4. Choose Generate Task List Run with Variant (CTRL+F8). And choose variant SAP&FRUN_ASM
5. Choose Start/Resume Task List Run in Dialog (or in Background). Once the task list run has been finished
successfully, green lights appear in the Status column. In case of errors perform error analysis using the task
documentation provided for each task.
Note: The OData and SICF services activated by this step are listed in the Appendix.
6.1.2 Setup Application Specifics
6.1.2.1 SAP Early Watch Alert
Prerequisites:
Before configuring SAP Early Watch Alert (EWA), the following prerequisites must be met:
• ST-PI 740 SP4 or higher must be implemented in Focused Run
• In Managed System ST-PI 740 SP4 or ST-PI 2008_1_7xx SP14 or higher must be implemented
• Destination SAPOSS is maintained (for details please refer to SAP Note 812386 - RFC connection to the
SAPNet R/3 front end)
Focused Run for SAP Solution Manager
Business Scenarios of Focused Run
CUSTOMER
© 2016 SAP SE or an SAP affiliate company. All rights reserved. 35
Procedure:
Activate the processing of EWA data
1. Start transaction SDCCN
2. Go to ‚Utilities‘ and choose ‘activate’
3. Click "Continue" on question if SDCCN should be activated in local system
4. Accept to create RFC destination SDCC_OSS
6.1.2.2 System Analytics Setup
Configure the Data Aggregation for System Analytics.
Procedure:
1. Start transaction SE38
2. Run Report SYSANA_CONFIGURATION with default settings
6.1.3 Background Jobs for ASM
Schedule the following background jobs using transaction SM36
JOBNAME REPORT Step User Start Time Recurrenc
e interval
SAP_FRN_SAM_UTILITY SAM_CREATE_AP_CMP FRN_BTC_SA
M
0:30 am daily
SAP_FRN_EWA_SEND_REPO
RT
FRUN_DOWNLOADS_REPORT FRN_BTC_EW
A
Immediatel
y
Hourly
SAP_FRN_LIC_DISTRIBUTIO
N
RAGS_MAINT_KEY_COLLECTO
R
FRN_BTC_SM
P
01:30 daily
SAP_FRN_SA_HOUSEKEEPE
R
WEA_AGG_STORE_PARTITIONI
NG
FRN_BTC_AS
M
02:00 Every day
SAP_FRN_ESM_SCHEDULER SRAF_SCHEDULER FRN_BTC_SR
A
immediatel
y
Every
minute
36
CUSTOMER
© 2016 SAP SE or an SAP affiliate company. All rights reserved.
Focused Run for SAP Solution Manager
Business Scenarios of Focused Run
6.2 Advanced User Monitoring
6.2.1 Preparing Use-Case
To prepare the UI environment for this use case, execute the task list SAP_FRUN_SETUP_USECASE with variant
SAP&FRUN_AUM in transaction STC01.
Procedure
1. Log on to your SAP ABAP system.
2. Call the following transaction:
Transaction Code STC01
3. On the Task Manager for Technical Configuration screen, insert SAP_FRUN_SETUP_USECASE in the Task
List field.
4. Choose Generate Task List Run with Variant (CTRL+F8). And choose variant SAP&FRUN_AUM
5. Choose Start/Resume Task List Run in Dialog (or in Background). Once the task list run has been finished
successfully, green lights appear in the Status column. In case of errors perform error analysis using the task
documentation provided for each task.
Note: The OData and SICF services activated by this step are listed in the Appendix.
6.2.2 Real User Monitoring Specific Setup Steps
Real User Monitoring table partitioning & batch job scheduling
Check if user <FRN_BTC_RUM> has been created according to security guide. Afterwards run Report
/RUM/SETUP using transaction SA38 to initialize Real User Monitoring
6.2.3 Background Jobs for AUM
Schedule the following background jobs using transaction SM36
JOBNAME REPORT Step User Start Time Recurrence
interval
SAP_FRN_TRACE_HK E2E_TRACE_DELETE FRN_BTC_TA 1:00 am daily
Focused Run for SAP Solution Manager
Business Scenarios of Focused Run
CUSTOMER
© 2016 SAP SE or an SAP affiliate company. All rights reserved. 37
6.3 Configuration and Security Analytics
6.3.1 Preparing Use-Case
To prepare the UI environment for this use case, execute the task list SAP_FRUN_SETUP_USECASE with variant
SAP&FRUN_CSA in transaction STC01.
Procedure
1. Log on to your SAP ABAP system.
2. Call the following transaction:
Transaction Code STC01
3. On the Task Manager for Technical Configuration screen, insert SAP_FRUN_SETUP_USECASE in the Task
List field.
4. Choose Generate Task List Run with Variant (CTRL+F8) and choose variant SAP&FRUN_CSA
5. Choose Start/Resume Task List Run in Dialog (or in Background). Once the task list run has been finished
successfully, green lights appear in the Status column. In case of errors perform error analysis using the task
documentation provided for each task.
Note: The OData and SICF services activated by this step are listed in the Appendix.
6.3.2 Additional Configuration for Configuration Validation
Execute Report COF_SETUP using transaction SA38
6.4 Advanced Integration Monitoring
6.4.1 Preparing Use-Case
To prepare the UI environment for this use case, execute the task list SAP_FRUN_SETUP_USECASE with variant
SAP&FRUN_AIM in transaction STC01.
Procedure
6. Log on to your SAP ABAP system.
7. Call the following transaction:
38
CUSTOMER
© 2016 SAP SE or an SAP affiliate company. All rights reserved.
Focused Run for SAP Solution Manager
Business Scenarios of Focused Run
Transaction Code STC01
8. On the Task Manager for Technical Configuration screen, insert SAP_FRUN_SETUP_USECASE in the Task
List field.
9. Choose Generate Task List Run with Variant (CTRL+F8) and choose variant SAP&FRUN_AIM
10. Choose Start/Resume Task List Run in Dialog (or in Background). Once the task list run has been finished
successfully, green lights appear in the Status column. In case of errors perform error analysis using the task
documentation provided for each task.
Note: The OData and SICF services activated by this step are listed in the Appendix.
6.4.2 Background Jobs for AIM
Schedule the following background jobs using transaction SM36
JOBNAME REPORT Step User Start Time Recurrence
interval
SAP_FRN_AIM_HOUSEKEEPING /IMA/HOUSEKEEPING FRN_BTC_AIM 1:00 am daily
Focused Run for SAP Solution Manager
Appendix
CUSTOMER
© 2016 SAP SE or an SAP affiliate company. All rights reserved. 39
7 Appendix
7.1 OData and SICF services activated by STC01 task lists
7.1.1 SAP_GW_FIORI_ERP_ONE_CLNT_SETUP with Variant SAP&FRUN_INIT
OData Services for Focused Run Application Foundation
Application Area OData Services
Focused Run UI runtime UI5LIB_SRV
TECHMON_UI5_TABS_SRV
LMDB_FILTERBAR_SRV
SOLMAN_COMMONS_SRV
Self-Monitoring SFM_STATUS_ODATA_SERVICE
Simple System Integration SSI_CONFIGURATION_SRV
Alert Inbox ACC
ALERTTICKER_SRSM_SRV
IT Calendar and Workmode
Management
WMM_DATA_SRV
IT_CALENDAR
Notification Management CNM_SRV
SICF Services for Focused Run Application Foundation
Webdynpro Runtime /sap/bc/webdynpro
/sap/public/ping
/sap/public/bc/ur
/sap/public/bc/icons
/sap/public/bc/icons_rtl
/sap/public/bc/webicons
/sap/public/bc/pictograms
/sap/public/bc/webdynpro/mimes
/sap/public/bc/webdynpro/ssr
/sap/bc/webdynpro/sap/wdhc_help_center
Webgui and NetWeaver services /sap/bc/gui/sap/its/webgui
40
CUSTOMER
© 2016 SAP SE or an SAP affiliate company. All rights reserved.
Focused Run for SAP Solution Manager
Appendix
/sap/public/myssocntl
/sap/bc/srt/wsdl
/sap/public/opu
Focused Run UI runtime /sap/bc/ui5_ui5/sap/frunui5lib
/sap/bc/bsp/sap/ai_tools_dnld
/sap/bc/ui5_ui5/sap/lmdbfilterbar
/sap/bc/webdynpro/sap/urlapi_application_manager
/sap/url/go
/sap/bc/webdynpro/sap/documentation/
/sap/bc/ui5_ui5/sap/bsp_sise_rm_ui5
/sap/bc/ui5_ui5/sap/bsp_ags_ui5_doc
Landscape Management Database /sap/bc/cim/ds
/sap/bc/cim/cimom
/sap/bc/cim/sync
/sap/bc/webdynpro/sap/lmdb_simple_setup
/sap/bc/webdynpro/sap/LMDB_WDA_EXPL_OIF
/sap/bc/webdynpro/sap/LMDB_WDA_GENB_OIF
/sap/bc/webdynpro/sap/LMDB_WDA_EXPL_HELP
/sap/bc/webdynpro/sap/LMDB_FPM_OVP_COMPONENT
Simple System Integration /sap/bc/webdynpro/sap/msc_ts_search_fpm_app
/sap/bc/ui5_ui5/sap/ssi_config
Simple Diagnostics Agent /sap/bc/webdynpro/sap/srsm_host_search_fpm_app
/sap/srsm_sda
/sap/bc/webdynpro/sap/srsm_agent_mass_update_app
Self-Monitoring /sap/bc/ui5_ui5/sap/metric_moni_sfm
/sap/bc/webdynpro/sap/solman_self_monitoring_app
Inbound data streaming channels /sap/srsm_mai/push_metrics
/sap/bc/sdf/sdcc/
/sap/bc/rest/E2E_TA_COL
/sap/bc/rest/cof
/sap/bc/rest/rumdataservice
/sap/bc/rest/statraggdatasrv
Monitoring Infrastructure /sap/bc/webdynpro/sap/fpm_dpc_role_assignment
/sap/bc/webdynpro/sap/wda_default_settings
/sap/bc/webdynpro/sap/wda_config_wizard
/sap/bc/webdynpro/sap/wda_consumer_variant
/sap/bc/webdynpro/sap/wda_threshold_information
Focused Run for SAP Solution Manager
Appendix
CUSTOMER
© 2016 SAP SE or an SAP affiliate company. All rights reserved. 41
/sap/bc/webdynpro/sap/wdc_transport_templates
/sap/bc/webdynpro/sap/maintenance_tool
/sap/bc/webdynpro/sap/wda_mai_rep_html
/sap/bc/webdynpro/sap/WDA_AC_DIR_BROWSER
/sap/bc/webdynpro/sap/wda_sise_update_content
Alert Inbox /sap/bc/ui5_ui5/sap/alertdetail
/sap/bc/ui5_ui5/sap/alertinboxapp
/sap/bc/apc/sap/alert_ticker_srsm
Guided Procedures Framework /sap/bc/webdynpro/sap/ags_gpa_browser
/sap/bc/webdynpro/sap/ags_gpa_gp
/sap/bc/webdynpro/sap/ags_gpa_logbook
/sap/bc/webdynpro/sap/wd_sise_fwk_wizard
/sap/bc/webdynpro/sap/ags_gpa_plugin_mngt
IT Calendar and Workmode
Management
/sap/bc/ui5_ui5/sap/itcalendar
/sap/bc/ui5_ui5/sap/workmode_app
Notification Management /sap/bc/ui5_ui5/sap/instant_notif
/sap/bc/ui5_ui5/sap/cnm_repository
/sap/bc/ui5_ui5/sap/notif_templ_app
/sap/bc/ui5_ui5/sap/notif_config
/sap/bc/ui5_ui5/sap/notif_schedule
/sap/bc/ui5_ui5/sap/notif_rec_list
/sap/bc/webdynpro/sap/dswp_na_grp_powl
/sap/bc/webdynpro/sap/dswp_na_generic_notif
/sap/bc/webdynpro/sap/dswp_na_configure_servers
Scheduling Management /sap/bc/webdynpro/sap/wd_sraf_admin_portal
7.1.2 SAP_FRUN_SETUP_USECASE with variant SAP&FRUN_ASM
OData Services for Focused Run ASM
Application Area OData Services
System Monitoring AI_SYSMON_SRV
AI_SYSMON_OVERVIEW_SRV
System Analytics WEA_SRV
42
CUSTOMER
© 2016 SAP SE or an SAP affiliate company. All rights reserved.
Focused Run for SAP Solution Manager
Appendix
Application Area OData Services
Service Availability Management SAM_SRV
SICF Services for Focused Run ASM
System Monitoring /sap/bc/ui5_ui5/sap/sr_sysmon
/sap/bc/ui5_ui5/sap/metricmonitor
/sap/bc/webdynpro/sap/troubleshoot
Advanced Monitoring /sap/bc/webdynpro/sap/advmon
System Analytics /sap/bc/ui5_ui5/sap/wea
/sap/bc/webdynpro/sap/wea_expert_configuration
Statistics Aggregate /sap/bc/webdynpro/sap/wd_statragg_cockpit
Service Availability Management /sap/bc/ui5_ui5/sap/sam_appl
License Management /sap/bc/webdynpro/sap/WD_AGS_MK_LIC_MNGT
7.1.3 SAP_FRUN_SETUP_USECASE with variant SAP&FRUN_AUM
OData Services for Focused Run AUM
Application Area OData Services
Real User Monitoring /RUM/UI5_SRV
Trace Analysis E2E_TRACE_UI_SRV
SICF Services for Focused Run AUM
Real User Monitoring /sap/bc/webdynpro/rum/WDA_COCKPIT
/sap/bc/ui5_ui5/RUM/E2ERUM
/sap/bc/webdynpro/rum/wd_alerting
Trace Analysis /sap/bc/ui5_ui5/sap/trace
/sap/bc/ui5_ui5/sap/tracejslib
/sap/bc/ui5_ui5/sap/TraceExt
/sap/srsm/E2E_trace_upl
Focused Run for SAP Solution Manager
Appendix
CUSTOMER
© 2016 SAP SE or an SAP affiliate company. All rights reserved. 43
7.1.4 SAP_FRUN_SETUP_USECASE with variant SAP&FRUN_AEM
SICF Services for Focused Run AEM
Inbound Connector /sap/bc/srt/rfc/sap/sap_aem_inbound_connector
7.1.5 SAP_FRUN_SETUP_USECASE with variant SAP&FRUN_CSA
OData Services for Focused Run CSA
Application Area OData Services
Configuration Validation CONFIG_VALIDATION_SRV
COF_ODATA_SRV
SICF Services for Focused Run CSA
Configuration Validation /sap/bc/ui5_ui5/sap/srsm_config_val
/sap/bc/webdynpro/sap/WD_CCDB_SCI
/sap/bc/webdynpro/sap/WD_COVA_TAR_MAINT
/sap/bc/ui5_ui5/sap/cof_admin_comp
7.1.6 SAP_FRUN_SETUP_USECASE with variant SAP&FRUN_AIM
OData Services for Focused Run AIM
Application Area OData Services
Integration Monitoring /IMA/UI5_SRV
Exception Management EXM_UI_SRV
44
CUSTOMER
© 2016 SAP SE or an SAP affiliate company. All rights reserved.
Focused Run for SAP Solution Manager
Appendix
SICF Services for Focused Run AIM
Integration Monitoring /sap/bc/ui5_ui5/ima/app
/sap/bc/webdynpro/sap/wda_s2c_cs_overview
www.sap.com/contactsap
© 2016 SAP SE or an SAP affiliate company. All rights reserved.
No part of this publication may be reproduced or transmitted in any
form or for any purpose without the express permission of SAP SE
or an SAP affiliate company
SAP and other SAP products and services mentioned herein as well
as their respective logos are trademarks or registered trademarks of
SAP SE (or an SAP affiliate company) in Germany and other
countries. All other product and service names mentioned are the
trademarks of their respective companies. Please see
www.sap.com/corporate-en/legal/copyright/index.epx#trademark
for additional trademark information and notices.
Material Number: