fluid-o-tech magnet drive gear pumps mg300 · pdf filefluid-o-tech reserves the right to alter...
TRANSCRIPT
51 (2 in)
45
(1
.77
in
)
27
(1
.06
in
)
17.5(0.69 in)
49-58 (1.93-2.28 in)
66.5-75.5 (2.62-2.97 in)56 (2.21 in)
6x(0.138 in)3.5
44.5 ± 0.05(1.75 in ± 0.002)
40
(1
.58
in
)
1.2(0.047 in)
15.2(0.69 in)
2x1/8" NPT
www.fluidotech.it
Fluid-o-Tech magnet drive gear pumps MG300 series
The MG300 series magnet drive gear pumps are
compact precision performance pumps for a wide
range of specialized applications.
Thanks to the improved design, the MG300 series
grant a more accurate and uniform delivery regardless
of the fluid temperature.
The seal less design with the magnetic transmission
of the rotation is guarantee of a leak proof product.
Static seals are available in PTFE™ / NBR / VITON®/
EPDM/SILICON, in order to guarantee the highest
chemical compatibility with a wide range of fluids.
The housing of the pump and the internal metal parts
are in AISI 316 L stainless steel while gears and bush-
ings are available in Peek™, Ceramic Peek™ or PTFE™.
In operation the MG300 series pumps are noiseless,
pulsation-free and capable of handling relatively high
temperature liquids (up to 120 °C or 248 °F) with low
coefficient of expansion.
Operation at different pressures ranges is possible
thanks to a choice of materials for the magnets.
All pumps are available with:
• 1/8” GAS or NPT
• customized ports upon request
• NSF listing (PTFE™ or Silicon seals)
• Medical and surgical equipment
• Hemodialysis apparatus
• Laser apparatus
• Lubrication
• Ink-jet printing systems
• Cooling systems
• Laboratory instrumentation
• Water purification and ultra-filtration
• Sampling
• Food processing equipment
Main applications
Dimensions in mm
Composition materials Technical information
Housing Gears Temperature range Max system pressure
SS PTFE™ -45 to +50 °C /-49 to +122 °F 20 bar/290 psi
SS Peek™ -45 to +120 °C /-49 to +248 °F 20 bar/290 psi
SS Ceramic peek™ -45 to +120 °C /-49 to +248 °F 20 bar/290 psi
Pos. Description Features Code
A1
B
A2
GPH
PSI
l/h
0
109876543210
40
35
30
25
20
15
10
5
0
MG304 @ 1450 RPM
0 20 40 60 80 100 120 200140 160 180
1 2 3 4 5 6 7 8 9 10 1514131211 BAR
E
DC
B
GPH
PSI
l/h
0
109876543210
40
35
30
25
20
15
10
5
0
MG304 @ 1725 RPM
0 20 40 60 80 100 120 200140 160 180
1 2 3 4 5 6 7 8 9 10 1514131211 BAR
ED
C
B
A
GPH
PSI
l/h
0
201816141210
86420
80
70
60
50
40
30
20
10
0
MG304 @ 2900 RPM
0 20 40 60 80 100 120 200140 160 180
1 2 3 4 5 6 7 8 9 10 1514131211 BAR
D
C
B
A
GPH
PSI
l/h
0
201816141210
86420
80
70
60
50
40
30
20
10
0
MG304 @ 3450 RPM
0 20 40 60 80 100 120 200140 160 180
1 2 3 4 5 6 7 8 9 10 1514131211 BAR
C
B
A
A
GPH l/h
0
201816141210
86420
80
70
60
50
40
30
20
10
0
MG309 @ 1450 RPM
1 2 3 4 5 6 7 8 9 10 BAR
C
B
A
PSI0 20 40 60 80 100 120 140
GPH l/h
0
201816141210
86420
80
70
60
50
40
30
20
10
0
MG309 @ 1725 RPM
1 2 3 4 5 6 7 8 9 10 BAR
C
B
A
PSI0 20 40 60 80 100 120 140
GPH l/h
0
262422201816141210
86420
100
90
80
70
60
50
40
30
20
10
0
MG313 @ 1450 RPM
1 2 3 4 5 6 7 8 9 10 BAR
C
B
A
PSI0 20 40 60 80 100 120 140
GPH l/h
0
3028262422201816141210
86
120
110
100
90
80
70
60
50
40
30
20
MG313 @ 1725 RPM
1 2 3 4 5 6 7 8 9 10 BAR
C
B
A
PSI0 20 40 60 80 100 120 140
GPH l/h
0
52504846444240383634323028
200
190
180
170
160
150
140
130
120
110
100
MG313 @ 2900 RPM
1 2 3 4 5 6 7 8 9 10 BAR
C
B
A
PSI0 20 40 60 80 100 120 140
GPH l/h
0
60585654525048464442403836
230
220
210
200
190
180
170
160
150
140
120
MG313 @ 3450 RPM
1 2 3 4 5 6 7 8 9 10 BAR
C
B
A
PSI0 20 40 60 80 100 120 140
GPH l/h
0
3432302826242220181614
130
120
110
100
90
80
70
60
50
MG309 @ 2900 RPM
1 2 3 4 5 6 7 8 9 10
3432302826242220181614
BAR
C
B
A
PSI0 20 40 60 80 100 120 140
GPH l/h
0
130
120
110
100
90
80
70
60
50
MG309 @ 3450 RPM
1 2 3 4 5 6 7 8 9 10 BAR
CB
A
PSI0 20 40 60 80 100 120 140
A = 1 cSt B = 20 cSt C = 75 cSt D = 160 cSt E = 200 cSt
Fluid-o-Tech Int’l Inc.161 Atwater St., Plantsville CT (USA) 06479Tel. +1 (860) 276-9270Fax +1 (860) 620-0193
Fluid-o-Tech Int’l Inc. Japan203, 2-17-19, Ebara, ShinagawaTokyo 142-0063, JapanTel. +81 (0) (3) 3783-9660Fax +81 (0) (3) 3783-9661
Fluid-o-Tech Asia (Beijing) Co., Ltd Jingwei Industrial Zone, Beifang Huairou, Beijing, 101400, PRCTel. +86 (0) (10) 61684650Fax +86 (0) (10) 61684651
Fluid-o-Tech srl Via Leonardo da Vinci, 4020094 Corsico, Milano, ItalyTel. +39 02 8917071Fax +39 02 89170799
Gear width
Housing material
Type of connections
Relief valve
Gear material
04
Pump series
Internal magnet
3MG X D 0 P S
0 40 9 1 3
G = ferriteS = rare earths
3 = with o-ring
D = 1/8" NPT
0 = without
Static seal material
S = SiliconN = NBRT = PTFE™V = Viton®
E = EPDM
P = Peek™T = PTFE™
X = AISI 316LS = SAF 2205
Pos. Description Features Code
Ferrite
6 mm bore MGAF05SA1
driving magnet 9 mm bore MGAF06S
11 mm bore MGAF09S
Rare earths
6 mm bore MGAS05SA2
driving magnet 9 mm bore MGAS06S
11 mm bore MGAS09S
Adapter
kit with ferrite
M48 motor MGBF42SA1 + B
driving magnet M56 motor MGBF56S
M63 motor MGBF63S
Adapter kit with rare earths
M48 motor MGBS42SA2 + B
driving magnet M56 motor MGBS56S
M63 motor MGBS63S
Note: Performance beyond the broken line zone are reached with the rare earths magnets. Characteristics with water at 20 °C (68 °F) and without relief valve, max vacuum 724 mmHg. Use filter before pump inlet not larger than 10 micron. Pump weight: 510 g (1,12 Lbs). Temperature requirements different from ambient temperature must be mentioned on the order. Different
materials are available upon request.
Fluid-o-Tech reserves the right to alter the specifications indicated in this catalogue at any time and without prior notice. MG3 – 04/10 Ed.
Fluid-o-Tech magnet drive gear pumps MG200 series
Ø 3
2
Ø 4
0
Ø 2
7
(65.5-80.5)
1.2
17.5
15.2
48-63
6x Ø 3.5
Ø 56
2x1/8"NPT
Ø 44.5 ±0.05
Ø 51
The MG200 series magnet drive gear pumpsare compact precision performance pumps forhigh technology applications. The magnetdrive principle provides a totally sealed pumpchamber capable of handling a wide range ofcorrosive liquids with a high degree of safety.The housing of the pump and the internal metal parts are in AISI 316 L stainless steeland the gears are available in PTFE™ or Peek™.
In operation the MG200 series pumps are noiseless, pulsation-free and capable of handlingrelatively high temperature fluids with low coefficient of expansion.The principle of the magnetic drive comprisesan inner magnet embodied in the pump andconnected to the driving gear, and an outer magnet connected to the motor shaft. The pole-to-pole alignment of the two magnetsprovides the driving motion to the pump. Decoupling will occur when the pump load exceeds the maximum coupling torque providedby the alignement of the two magnets.
• 1/8" GAS or NPT ports• Relief valve available upon request• NSF listed pumps for potable water
®
www.fluidotech.it
Dimensions in mm
Composition materials Technical information
Housing Gear Seal Temperature range Max system pressure
316 L SS PTFE™ PTFE™ -45 to +50 °C /-49 to +122 °F 20 bar/290 psi
316 L SS Peek™ PTFE™ -45 to +120 °C /-49 to +248 °F 20 bar/290 psi
• Medical and surgical equipment
• Hemodialysis apparatus
• Laser apparatus
• Lubrication
• Ink-jet printing systems
• Cooling systems
• Laboratory instrumentation
• Water purification and ultra-filtration
• Sampling
• Food processing equipment
Main applications
20 Scheda MG ok:20 Scheda MG 9-03-2009 17:47 Pagina 1
Pos. Description Features Code
A = 1 cSt B = 20 cSt C = 70 cSt D = 160 cSt E = 200 cSt
Fluid-o-Tech magnet drive gear pumps MG200 series
Note: Performance beyond the broken line zone are reached with the rare earths magnets. Characteristics with water at 20 °C (68 °F) and without relief valve, max vacuum 724 mmHg.Use filter before pump inlet not larger than 10 micron. Pump weight: 400 g (0,90 Lbs). Temperature requirements different from ambient temperature must be mentioned onthe order. Different materials are available upon request.
Fluid-o-Tech reserves the right to alter the specifications indicated in this catalogue at any time and without prior notice.
A1
B
A2
Gear width
Housing material
Type of connections
Relief valve
Gear material
09
Pump series
Internal magnet
2MG X D 0
Static seal material
TP
0 40 9 1 3
G = ferriteS = rare earths
2 = PTFE™flat seal
P = Peek™T = PTFE™
T = PTFE™
0 = without1 = with
D = 1/8" NPTG = 1/8" GAS
X = AISI 316LS = SAF 2205Y = AISI 303
Ferrite6 mm bore MGAF06S
A1driving magnet
9 mm bore MGAF09S11 mm bore MGAF11S
Rare earths6 mm bore MGAS06S
A2driving magnet
9 mm bore MGAS09S11 mm bore MGAS11S
Adapter kit with ferrite M48 motor MGBF48S
A1 + Bdriving magnet
M56 motor MGBF56SM63 motor MGBF63S
Adapter kit with rare earths M48 motor MGBS48S
A2 + Bdriving magnet
M56 motor MGBS56SM63 motor MGBS63S
Pos. Description Features Code
GPH
PSI
l/h
0
10
9
8
7
6
5
4
3
2
1
0
40
35
30
25
20
15
10
5
0
MG 204 @ 1450 RPM
0 20 40 60 80 100 120 200140160 180
1 2 3 4 5 6 7 8 9 10 1514131211 BAR
E
DC
B
GPH
PSI
l/h
0
10
9
8
7
6
5
4
3
2
1
0
40
35
30
25
20
15
10
5
0
MG 204 @ 1725 RPM
0 20 40 60 80 100 120 200140160 180
1 2 3 4 5 6 7 8 9 10 1514131211 BAR
ED
C
B
A
GPH
PSI
l/h
0
20
18
16
14
12
10
8
6
4
2
0
80
70
60
50
40
30
20
10
0
MG 204 @ 2900 RPM
0 20 40 60 80 100 120 200140160 180
1 2 3 4 5 6 7 8 9 10 1514131211 BAR
D
C
B
A
GPH
PSI
l/h
0
20
18
16
14
12
10
8
6
4
2
0
80
70
60
50
40
30
20
10
0
MG 204 @ 3450 RPM
0 20 40 60 80 100 120 200140160 180
1 2 3 4 5 6 7 8 9 10 1514131211 BAR
C
B
AA
GPH l/h
0
20
18
16
14
12
10
8
6
4
2
0
80
70
60
50
40
30
20
10
0
MG 209 @ 1450 RPM
1 2 3 4 5 6 7 8 9 10 BAR
C
B
A
PSI0 20 40 60 80 100 120 140
GPH l/h
0
20
18
16
14
12
10
8
6
4
2
0
80
70
60
50
40
30
20
10
0
MG 209 @ 1725 RPM
1 2 3 4 5 6 7 8 9 10 BAR
C
B
A
PSI0 20 40 60 80 100 120 140
GPH l/h
0
3432302826242220181614
130
120
110
100
90
80
70
60
50
MG 209 @ 2900 RPM
1 2 3 4 5 6 7 8 9 10
3432302826242220181614
BAR
C
B
A
PSI0 20 40 60 80 100 120 140
GPH l/h
0
130
120
110
100
90
80
70
60
50
MG 209 @ 3450 RPM
1 2 3 4 5 6 7 8 9 10 BAR
C
B
A
PSI0 20 40 60 80 100 120 140
MG2 – 03/09 Ed.
GPH l/h
0
26242220181614121086420
100
90
80
70
60
50
40
30
20
10
0
MG 213 @ 1450 RPM
1 2 3 4 5 6 7 8 9 10 BAR
C
B
A
PSI0 20 40 60 80 100 120 140
GPH l/h
0
302826242220181614121086
120
110
100
90
80
70
60
50
40
30
20
MG 213 @ 1725 RPM
1 2 3 4 5 6 7 8 9 10 BAR
C
B
A
PSI0 20 40 60 80 100 120 140
GPH l/h
0
52504846444240383634323028
200
190
180
170
160
150
140
130
120
110
100
MG 213 @ 2900 RPM
1 2 3 4 5 6 7 8 9 10 BAR
C
B
A
PSI0 20 40 60 80 100 120 140
GPH l/h
0
60585654525048464442403836
230
220
210
200
190
180
170
160
150
140
120
MG 213 @ 3450 RPM
1 2 3 4 5 6 7 8 9 10 BAR
C
B
A
PSI0 20 40 60 80 100 120 140
Fluid-o-Tech Int’l Inc.161 Atwater St., Plantsville CT (USA) 06479Tel. +1 (860) 276-9270Fax +1 (860) 620-0193
Fluid-o-Tech Int’l Inc. Japan203, 2-17-19, Ebara, ShinagawaTokyo 142-0063, JapanTel. +81 (0) (3) 3783-9660Fax +81 (0) (3) 3783-9661
Fluid-o-Tech Asia (Beijing) Co., Ltd Jingwei Industrial Zone, Beifang Huairou, Beijing, 101400, PRCTel. +86 (0) (10) 61684650Fax +86 (0) (10) 61684651
Fluid-o-Tech srl Via Leonardo da Vinci, 4020094 Corsico, Milano, ItalyTel. +39 02 8917071Fax +39 02 89170799
20 Scheda MG ok:20 Scheda MG 9-03-2009 17:47 Pagina 2