Flex Metal Gel Coats

Jesmonite Flex Metal Gel Coats are formulated using real metal powder to create the ultimate replication of metal in moulded materials. The Jesmonite Flex Metal Gel Coat surface can be polished with fine grades of wire wool and polishing machinery to reveal the metallic powders.

Jesmonite Flex Metal Gel Coats are available in Bronze, Copper, Silver Bronze and Brass. They are fully compatible with Jesmonite AC730 and Jesmonite AC830 as a laminated or cast back up.

Jesmonite Flex Metal Gel Coats achieve a B-s1-d0 EN13501-1 Fire Classification.

About Flex Metal Gel Coats

Cladding PanelsArchitectural ElementsSculptureTablewareFurnitureWater FeaturesLighting ElementsProp WorkDecorative Tiles

Jesmonite Flex Metal Gel Coats are designed for glass reinforced decorative applications, when used in conjunction with Jesmonite AC730 as a backup material. They can also be used for heavyweight cast applications, when used in conjunction with Jesmonite AC830 as a backup material.

Flex Metal Gel CoatsApplications

StrongerStrongerStrong, flexible, and more durable, with an increased impact resistance.

LighterLighterLighter than stone, concrete and traditional sand and cement products.

SaferSaferIndependently fire rated in accordance with European Fire Classification EN 13501-1. Solvent free with no VOC’s.

FinerFinerReplicates the very finest detail with superior weathering qualities.

GreenerGreenerWater-based making it kinder to theenvironment.

Flex Metal Gel CoatsKey Benefits

If you would like to know more about Jesmonite, where you can buy it or would like to discuss any specific requirements please....

Call us on +44(0)1588 630302+44(0)1588 630302Email us at sales@jesmonite.comsales@jesmonite.comOr visit www.jesmonite.comwww.jesmonite.com

Jesmonite® is a Registered Trademark ‘All Rights Reserved’

JESMONITE LIMITEDJESMONITE LIMITEDChallenge CourtBishops CastleShropshireSY9 5DWUnited Kingdom

Get In Touch