fisher 249 sensor

www.Fisher.com

Fisher� 249 Sensor, Level Controller, andTransmitter DimensionsThis bulletin contains dimensional information forFisher displacer‐type sensors and for controllers andtransmitters used with these sensors. Dimensions aresubject to change and certified dimensions should berequested for construction projects. Some of theabbreviations used in this document are as follows:NPT = National Pipe Thread, NPS = Nominal Pipe Size,FF = Flat Face Flange, RF = Raised Face Flange, and RTJ = Ring Type Joint Flange.

Flange specification references are ASME B16.1 forCL125 and 250 and ASME 16.5 for CL150, 300, 600,900, 1500 and 2500.

ContentsCaged Displacer for External Vessel Mounting

249: figure 1 and 2; tables 1, 2, 3, and 4

249B and 249BF: figure 3; tables 5, 6, 7, and 8

249C and 249K: figure 4; tables 9, 10, and 11

249L: figure 5

Cageless Displacer for Internal Vessel Mounting

Top Mounted.

249BP and 249P: figure 6; tables 12 and 13

249CP: figure 7; tables 14 and 15

Side Mounted.

249V: figure 8; table 16

249VS: figure 9, 10, 11, and 12

W8332

W7926

W8334

Cageless Displacer for Mounting on CustomerSupplied Cage or on Top of Vessel

249W: figure 13

Controllers and Transmitters

Fisher 2500 Controller / Transmitter: figure 14

FIELDVUE� DLC3010 / DLC3020f Digital LevelController: figure 15

Sensor, Controller, and Transmitter DimensionsD200039X12

Product Bulletin34.2:249July 2012



2

249Figure 1. Fisher 249 Top View

A1323‐1

241(9.50)

244(9.62)

203(8.00)

297(11.69)

MATCH LINE (A)

mm(INCH)

TOP VIEW

Table 1. Fisher 249 Dimensions F, M, and W for S‐1 and F‐1 Connections(1)

S‐1 AND F‐1 CONNECTIONS

DisplacerLength

F MW

CL125 FF Scrd NPT CL250 RF Scrd NPT CL125 FF CL250 RF

mm

356813

5621019

495953

5751032

241470

279508

286514

406864

Inches

1432

22.1240.12

19.5037.50

22.6240.62

9.5018.50

11.0020.00

11.2520.25

16.0034.00

1. Scrd is 1‐1/2 and 2 NPT. Flanges in NPS 2 only.

Table 2. Fisher 249 Dimensions F, M, and W for S‐2Connections

S‐2 CONNECTIONS: 1‐1/2 NPT, CL250

Displacer Length F M W

mm Inch mm Inch mm Inch mm Inch

356 14 657 25.88 241 9.50 394 15.5





356 14 356 14.00 241 9.50 394 15.5





356 14 445 17.50 241 9.50 394 15.5



3

Figure 2. Fisher 249 Side View (see tables 1, 2, 3, and 4)

A1324‐1

A1325‐1

A1326‐1

A1327‐1

SIDE VIEWmm

(INCH)

S‐1 AND F‐1TOP AND BOTTOM CONNECTIONS

MATCH LINE (B)

44(1.75)

WF

CL125 ‐ 1/2‐14 NPTCL250 ‐ 3/4‐14 NPT

F

M

MATCH LINE (B)

CL125 ‐ 1/2‐14 NPTCL250 ‐ 3/4‐14 NPT

S‐3UPPER AND LOWER SIDE CONNECTIONS

302(11.88)

W

44(1.75)

89(3.50)

CL125 ‐ 1/2‐14 NPTCL250 ‐ 3/4‐14 NPT

CL125 ‐ 1/2‐14 NPTCL250 ‐ 3/4‐14 NPT

MATCH LINE (B) MATCH LINE (B)

44(1.75)

44(1.75)

302(11.88)

WF

89(3.50)

M

W

F

M

S‐2TOP AND LOWER SIDE CONNECTIONS S‐4

UPPER SIDE AND BOTTOM CONNECTIONS

89(3.50)

M



4

249B and 249BF (NPS 1‐1/2 and 2 End Connections)

Figure 3. Fisher 249B and 249BF (see tables 5, 6, 7, and 8)

SIDE VIEW

TOP VIEW

A1328‐1

A1329‐1

A1330‐1

A1331‐1

A1332‐1

MATCH LINE (A)

MATCHLINE (B)

MATCHLINE (B)

MATCHLINE (B)

MATCHLINE (B)

3/4‐14 NPT

3/4‐14 NPT

3/4‐14 NPT

3/4‐14 NPT

S‐2 AND F‐2TOP AND LOWER SIDE CONNECTIONS

S‐4 AND F‐4UPPER SIDE AND BOTTOM CONNECTIONS

S‐1 AND F‐1TOP AND BOTTOM CONNECTIONS

S‐3 AND F‐3UPPER AND LOWER SIDE CONNECTIONS

1‐1/2 11‐1/2 NPT

421(16.56)

mm(INCH)

229(9.00)

244(9.62)

297(11.69)

203(8.00)

F

G

W

A

A

M

106(4.19)

103(4.06)

F

G

W

M

A

FG

M

103(4.06)

106(4.19)

103(4.06)

F

W

G

M

A

1‐1/2 11‐1/2 NPT

103(4.06)

421(16.56)

W



5

Table 5. Fisher 249B and 249BF S‐1, F‐1, S‐4, and F‐4 Connections

Conn.Style

Dis‐placerLength

F M

ScrdNPT

CL150 CL300 CL600 ScrdNPT

CL150 CL300 CL600

RF RTJ RF RTJ RF RTJ RF RTJ RF RTJ RF RTJ

S‐1andF‐1

(mm)

356813

121915241829

5861043144917542058

6621119152618302135

6751132153818432148

6681126153218362141

6841141154818532157

6871145155118562160

6911148155418592164

284513716866

1021

322551754907

1059

329557760913

1065

325554757910

1062

333562765917

1070

335564767919

1072

337565768921

1073

2134243827433048

2364266929733278

2440274530503354

2453275730623367

2446275130563361

2462276730723377

2465277030753380

2469277330783383

1173132614781630

1211136415161669

1218137015221675

1214136715191672

1222137515271679

1224137615291681

1226137815301683

S‐1andF‐1

(Inch)

1432486072

23.0641.0657.0669.0681.06

26.0644.0660.0672.0684.06

26.5644.5660.5672.5684.56

26.3144.3160.3172.3184.31

26.9444.9460.9472.9484.94

27.0645.0661.0673.0685.06

27.1945.1961.1973.1985.19

11.1920.1928.1934.1940.19

12.6921.6929.6935.6941.69

12.9421.9429.9435.9441.94

12.8121.8129.8135.8141.81

13.1222.1230.1236.1242.12

13.1922.1930.1936.1942.19

13.2522.2530.2536.2542.25

8496

108120

93.06105.06117.06129.06

96.06108.06120.06132.06

96.56108.56120.56132.56

96.31108.31120.31132.31

96.94108.94120.94132.94

97.06109.06121.06133.06

97.19109.19121.19133.19

46.1952.1958.1964.19

47.6953.6959.6965.69

47.9453.9459.9465.94

47.8153.8159.8165.81

48.1254.1260.1266.12

48.1954.1960.1966.19

48.2554.2560.2566.25

S‐4andF‐4

(mm)

356813

121915241829

462919

132616301935

500957

136416691973

506964

137016751980

503960

136716721976

511968

137516791984

513970

137616811986

514972

137816831988

284513716866

1021

322551754907

1059

329557760913

1065

325554757910

1062

333562765917

1070

335564767919

1072

337565768921

1073

2134243827433048

2240254528503154

2278258328883193

2284258928943199

2281258628913196

2288259328993203

2291259629003265

2292259729023267

1173132614781630

1211136415161669

1218137015221675

1214136715191672

1222137515271679

1224137615291681

1226137815301683

S‐4andF‐4

(Inch)

1432486072

18.1936.1952.1964.1976.19

19.6937.6953.6965.6977.69

19.9437.9453.9465.9477.94

19.8137.8153.8165.8177.81

20.1238.1254.1266.1278.12

20.1938.1954.1966.1978.19

20.2538.2554.2566.2578.25

11.1920.1928.1934.1940.19

12.6921.6929.6935.6941.69

12.9421.9429.9435.9441.94

12.8121.8129.8135.8141.81

13.1222.1230.1236.1242.12

13.1922.1930.1936.1942.19

13.2522.2530.2536.2542.25

8496

108120

88.19100.19112.19124.19

86.69101.69113.69125.69

89.94101.94113.94125.94

89.81101.81113.81125.81

90.12102.12114.12126.12

90.19102.19114.19126.19

90.25102.25114.25126.25

46.1952.1958.1964.19

47.6953.6959.6965.69

47.9453.9459.9465.94

47.8153.8159.8165.81

48.1254.1260.1266.12

48.1954.1960.1966.19

48.2554.2560.2566.25



6

Table 6. Fisher 249B and 249BF S‐2, F‐2, S‐3, and F‐3 Connections

S‐2 AND F‐2 CONNECTIONSS‐3 AND F‐3

CONNECTIONS

F

M F MDisplacerLength

ScrdNPT

CL150 CL300 CL600

RF RTJ RF RTJ RF RTJ

mm mm

356813

121915241829

480937

134316481953

518975

138116861991

524981

138716921997

521978

138416891994

529986

139216972002

530988

139416992004

532989

139517002005

284513716866

1021

356813

121915241829

284513716866

1021

2134243827433048

2258256228673172

2296260029053210

2302260729113216

2299260429083213

2307261129163221

2308261329183223

2310261529193224

1173132614781630

2134243827433048

1173132614781630

Inches Inches

1432486072

18.8836.8852.8864.8876.88

20.3838.3854.3866.3878.38

20.6238.6254.6266.6278.62

20.5038.5054.5066.5078.50

20.8138.8154.8166.8178.81

20.8838.8854.8866.8878.88

20.9438.9454.9466.9478.94

11.1920.1928.1934.1940.19

14.0032.0048.0060.0072.00

11.1920.1928.1934.1940.19

8496

108120

88.88100.88112.88124.88

90.38102.38114.38126.38

90.62102.62114.62126.62

90.50102.50114.50126.50

90.81102.81114.81126.81

90.88102.88114.88126.88

90.94102.94114.94126.94

46.1952.1958.1964.19

84.0096.00

108.00120.00

46.1952.1958.1964.19

Table 7. Fisher 249B and 249BF Dimension AA (COMMON DIMENSION)

Scrd NPT CL150 RF CL150 RTJ CL300 RF CL300 RTJ CL600 RF CL600 RTJ

mm Inch mm Inch mm Inch mm Inch mm Inch mm Inch mm Inch

121 4.75 145 5.69 151 5.94 148 5.81 155 6.12 157 6.19 159 6.25

Table 8. Fisher 249B and 249BF Dimensions W and GCOMMON DIMENSION

Displacer Length W G

mm Inch mm Inch mm Inch

356813

121915241829

1432486072

394851

125715621867

15.5033.5049.5061.5073.50

197425629781933

7.7516.7524.7530.7536.75

2134243827433048

8496

108120

2172247727813086

85.5097.50

109.50121.50

1086123813911543

42.7548.7554.7560.75



7

249C and 249K (NPS 1‐1/2 & 2 End Connections)

A1363‐1

249K ONLY

308(12.12)

402(15.81)

267(10.50)

MATCH LINE (A)

Figure 4. Fisher 249C and 249K (see tables 9, 10, and 11)

A1344‐1

A1342‐1

A1340‐1

A1343‐1

249C ONLY

S‐1 AND F‐1

TOP AND BOTTOM CONNECTIONS

S‐2 AND F‐2

TOP AND LOWER SIDE CONNECTIONS

S‐4 AND F‐4


S‐3 AND F‐3

UPPER AND LOWER SIDE CONNECTIONS

TOP VIEW

168(6.62)

297(11.69)

210(8.25)

57(2.25)

94(3.69)

MATCHLINE (B)

MATCHLINE (B)

MATCH LINE (A)

MATCHLINE (B)

MATCHLINE (B)

213(8.38)94

(3.69)

F

M

A

F

M

A

1/2‐14 NPT

F

F

M

A

A

M

1/2‐14 NPT

1‐1/2 11‐1/2 NPT (249C)2 11‐1/2 NPT (249K)

1

2

Note: 1 389 (15.31) for 249K 2 119 (4.69) for 249K 3 102 (4.00) for 249K

2

213(8.38)

1

33

3

3

1‐1/2 11‐1/2 NPT (249C)2 11‐1/2 NPT (249K)

57(2.25)

57(2.25)

57(2.25)



8

Table 9. Fisher 249C and 249K Dimensions F and M, S‐1, F‐1, S‐4, and F‐4 Connections

Conn.Style

Dis‐placerLength

249C 249K

F M F M

ScrdNPT

CL150 CL300 CL600 ScrdNPT

CL150 CL300 CL600 NPS1‐1/2Flg.

NPS 2Flg.

Flg.RF RTJ RF RTJ RF RTJ RF RTJ RF RTJ RF RTJ

S‐1andF‐1

(mm)

356813

12191524182921342438

489946

135313571962

‐‐‐2826

530988

13941699200423082613

5431000140717112016

‐‐‐‐‐‐

546100314101715201923242781

55910161422172720322337

‐‐‐

5601018142417292034

‐‐‐‐‐‐

5601018142417292034

‐‐‐‐‐‐

235464667819972‐‐‐

127

257486689841994

11461298

264492695848

1000‐‐‐‐‐‐

264492695848

100011531305

270498702854

10061159

‐‐‐

272500703856

1008‐‐‐‐‐‐

272500703856

1008‐‐‐‐‐‐

6451102

‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐

6541111

‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐

305533‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐

S‐1andF‐1

(In.)

14324860728496

19.2537.2553.2565.2577.25

‐‐‐111.25

20.8838.8854.8866.8878.8890.88

102.88

21.3839.3855.3867.3879.38

‐‐‐‐‐‐

21.5039.5055.5067.5079.5091.50

109.50

22.0040.0056.0068.0080.0092.00

‐‐‐

22.0640.0656.0668.0680.06

‐‐‐‐‐‐

22.0640.0656.0668.0680.06

‐‐‐‐‐‐

9.2518.2526.2532.2538.25

‐‐‐50.25

10.1219.1227.1233.1239.1245.1251.12

10.3819.3827.3833.3839.38

‐‐‐‐‐‐

10.3819.3827.3833.3839.3845.3851.38

10.6219.6227.6233.6239.6245.62

‐‐‐

10.6919.6927.6933.6939.69

‐‐‐‐‐‐

10.6919.6927.6933.6939.69

‐‐‐‐‐‐

25.3843.38

‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐

25.7543.75

‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐

12.0021.00

‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐

S‐4andF‐4

(mm)

356813

12191524182921342438

409867

127315181883

‐‐‐‐‐‐

432889

12951600190522102515

438895

130216071911

‐‐‐‐‐‐

438895

130216071911

‐‐‐‐‐‐

445902

130816131918

‐‐‐‐‐‐

446903

131016141919

‐‐‐‐‐‐

446903

131016141919

‐‐‐‐‐‐

232460667816968‐‐‐‐‐‐

254483686838991

11431295

260489692845997‐‐‐‐‐‐

260489692845997‐‐‐‐‐‐

267495699851

1003‐‐‐‐‐‐

268497700852

1005‐‐‐‐‐‐

268497700852

1005‐‐‐‐‐‐

483940‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐

483940‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐

305533‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐

S‐4andF‐4

(In.)

14324860728496

16.1234.1250.1262.1274.12

‐‐‐‐‐‐

17.0035.0051.0063.0075.0087.0099.00

17.2535.2551.2563.2575.25

‐‐‐‐‐‐

17.2535.2551.2563.2575.25

‐‐‐‐‐‐

17.5035.5051.5063.5075.50

‐‐‐‐‐‐

17.5635.5651.5663.5675.56

‐‐‐‐‐‐

17.5635.5651.5663.5675.56

‐‐‐‐‐‐

9.1218.1226.1232.1238.12

‐‐‐‐‐‐

10.0019.0027.0033.0039.0045.0051.00

10.2519.2527.2533.2539.25

‐‐‐‐‐‐

10.2519.2527.2533.2539.25

‐‐‐‐‐‐

10.5019.5027.5033.5039.50

‐‐‐‐‐‐

10.5619.5627.5633.5639.56

‐‐‐‐‐‐

10.5619.5627.5633.5639.56

‐‐‐‐‐‐

19.0037.00

‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐

19.0037.00

‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐

12.0021.00

‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐

Table 10. Fisher 249C and 249K, Dimensions F and M, S‐2, F‐2, S‐3, and F‐3 ConnectionsS‐2 AND F‐2 CONNECTIONS S‐3 AND F‐3 CONNECTIONS

Dis‐placerLength

249C 249K 249C 249K

F

M

F

M F M F MScrdNPT

CL150 CL300 CL600 NPS1‐1/2Flg.

NPS 2Flg.RF RTJ RF RTJ RF RTJ

mm

356813

12191524182921342438

432889

129516001905

‐‐‐‐‐‐

451908

1314161919242229

‐‐‐

457914

132116261930

‐‐‐‐‐‐

460917

1324162919332238

‐‐‐

467924

133016351940

‐‐‐‐‐‐

467924

133016351940

‐‐‐‐‐‐

467924

133016351940

‐‐‐‐‐‐

272500703856

10081161

‐‐‐

518975‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐

527984‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐

297526‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐

356813

12191524182921342438

272500703856

100811611313

356813‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐

297526‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐

Inches

14324860728496

17.0035.0051.0063.0075.00

‐‐‐‐‐‐

17.7535.7551.7563.7575.7587.75

‐‐‐

18.0036.0052.0064.0076.00

‐‐‐‐‐‐

18.1236.1252.1264.1276.1288.12

‐‐‐

18.3836.3852.3864.3876.38

‐‐‐‐‐‐

18.3836.3852.3864.3876.38

‐‐‐‐‐‐

18.3836.3852.3864.3876.38

‐‐‐‐‐‐

10.6919.6927.6933.6939.6945.69

‐‐‐

20.3838.38

‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐

20.7538.75

‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐

11.6920.69

‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐

14.0032.0048.0060.0072.0084.0096.00

10.6919.6927.6933.6939.6945.6951.69

14.0032.00

‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐

11.6920.69

‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐

Table 11. Fisher 249C and 249K Dimension A

END CONNECTIONSIZE

249CSCREWED

249CCL150 RF

249CCL150 RTJCL300 RF

249CCL300 RTJ

249CCL600 RF or RTJ

249K CL1500 FLANGES

DN NPS mm Inch mm Inch mm Inch mm Inch mm Inch mm Inch

4050

1‐1/22

102102

4.004.00

111111

4.384.38

117117

4.624.62

122125

4.814.94

125125

4.944.94

148168

5.816.62



9

249L

Figure 5. Fisher 249L

A1349‐1 A1345‐1 A1348‐1

A1347‐1

A1346‐1 TOP VIEW

F1

TOP AND BOTTOM CONNECTIONS

F2

TOP AND LOWER SIDE CONNECTIONS

F3

UPPER AND LOWER SIDE CONNECTION

(NPS 2 RTJ FLG.)

F4


(NPS 2 RTJ FLG.)

SIDE VIEW

295(11.62)

406(16.00)

MATCHLINE (B)

90(3.56)

NPS 2 RTJ FLG.

MATCH LINE (A)

356(14.00)

230(9.06)

NPS 1 RTJ FLG.

MATCHLINE (B)

NPS 1 RTJ FLG.

90(3.56)

F

MATCHLINE (B)

673(26.50)

673(26.50)

137(5.38)

137(5.38)

135(5.31)

135(5.31)

1/2 14 NPTNPS 2 RTJ FLG.1/2 14 NPT

249(9.81)

249(9.81)

249(9.81)

MATCHLINE (B)

F

F

F

mm(INCH)

DISPLACER

LENGTH

DIMENSION F

mm

INCHES

356

813

F‐1(1) F‐2(1) F‐3(1) F‐4(1)

783

1240

629

1086

356

813

510

967

14

32

30.81

48.81

24.75

42.75

14.00

32.00

20.06

38.06

1. 249L Sensor has CL2500 RTJ flanges.



10

249BP and 249P

Figure 6. Fisher 249BP and 249P (see tables 12 and 13)

A1355‐1

A1358‐1

249P

A1357‐1

A1356‐1

249BP

244(9.62)

297(11.69)

203(8.00)

R R

244(9.62)

297(11.69)203

(6.00)

MATCH LINE (A)MATCH LINE (A)

44(1.75)

MATCHLINE (B)

MATCHLINE (B)

103(4.06)

P

G

F

P

G

F

DD

1‐1/2 11‐1/2 NPT1‐1/2 11‐1/2 NPT THROUGH CL6002 11‐1/2 NPT FOR CL900 AND CL1500

TOP VIEW TOP VIEW

SIDE VIEW SIDE VIEW

mm(INCH)

Table 12. Fisher 249BP and 249P Dimension D, F, and GSTANDARD DISPLACER AND STEM COMBINATIONS

D FG(1)

mm Inch mm Inch

765141383532292525

3.002.001.621.501.381.251.121.001.00

356813

1219152418292134243827433048

14.0032.0048.0060.0072.0084.0096.00

108.00120.00

Specify.Maximum

length is 1372mm (54 inch)

1. If not specified, G dimension will be 305 mm (12 inches).



11

Table 13. Fisher 249BP and 249P Dimension P and R

DIMENSIONTYPENO.

FLANGESIZE, NPS

CL125FF

CL250RF

CL150 CL300 CL600 CL900 CL1500

RF RTJ RF RTJ RF RTJ RF RTJ RF RTJ

mm

P

249BP

468

‐‐‐‐‐‐‐‐‐

‐‐‐‐‐‐‐‐‐

238240243

244‐‐‐‐‐‐

256‐‐‐‐‐‐

270‐‐‐‐‐‐

272‐‐‐‐‐‐

‐‐‐‐‐‐‐‐‐

‐‐‐‐‐‐‐‐‐

‐‐‐‐‐‐‐‐‐

‐‐‐‐‐‐‐‐‐

‐‐‐‐‐‐‐‐‐

R468

‐‐‐‐‐‐‐‐‐

‐‐‐‐‐‐‐‐‐

229279343

229‐‐‐‐‐‐

254318381

254‐‐‐‐‐‐

273‐‐‐‐‐‐

273‐‐‐‐‐‐

‐‐‐‐‐‐‐‐‐

‐‐‐‐‐‐‐‐‐

‐‐‐‐‐‐‐‐‐

‐‐‐‐‐‐‐‐‐

P

249P

468

214216219

222227232

214216219

221‐‐‐‐‐‐

222227232

230‐‐‐‐‐‐

‐‐‐244‐‐‐

236‐‐‐‐‐‐

303‐‐‐‐‐‐

305‐‐‐‐‐‐

313‐‐‐‐‐‐

314‐‐‐‐‐‐

R468

229279343

254318381

229279343

‐‐‐‐‐‐‐‐‐

254318381

254‐‐‐‐‐‐

‐‐‐356‐‐‐

273‐‐‐‐‐‐

292‐‐‐‐‐‐

292‐‐‐‐‐‐

311‐‐‐‐‐‐

311‐‐‐‐‐‐

DIMENSIONTYPENO.

FLANGESIZE, NPS

Inches

P

249BP

468

‐‐‐‐‐‐‐‐‐

‐‐‐‐‐‐‐‐‐

9.389.449.56

9.62‐‐‐‐‐‐

9.749.94

10.12

10.06‐‐‐‐‐‐

10.62‐‐‐‐‐‐

10.69‐‐‐‐‐‐

‐‐‐‐‐‐‐‐‐

‐‐‐‐‐‐‐‐‐

‐‐‐‐‐‐‐‐‐

‐‐‐‐‐‐‐‐‐

R468

‐‐‐‐‐‐‐‐‐

‐‐‐‐‐‐‐‐‐

9.0011.0013.50

9.00‐‐‐‐‐‐

10.0012.5015.00

10.00‐‐‐‐‐‐

10.75‐‐‐‐‐‐

10.75‐‐‐‐‐‐

‐‐‐‐‐‐‐‐‐

‐‐‐‐‐‐‐‐‐

‐‐‐‐‐‐‐‐‐

‐‐‐‐‐‐‐‐‐

P

249P

468

8.448.508.62

8.758.949.12

8.448.508.62

8.69‐‐‐‐‐‐

8.758.949.12

9.06‐‐‐‐‐‐

‐‐‐9.62

‐‐‐

9.31‐‐‐‐‐‐

11.94‐‐‐‐‐‐

12.00‐‐‐‐‐‐

12.31‐‐‐‐‐‐

12.38‐‐‐‐‐‐

R468

9.0011.0013.50

10.0012.5015.00

9.0011.0013.50

9.00‐‐‐‐‐‐

10.0012.5015.00

10.00‐‐‐‐‐‐

‐‐‐14.00

‐‐‐

10.75‐‐‐‐‐‐

11.50‐‐‐‐‐‐

11.50‐‐‐‐‐‐

12.25‐‐‐‐‐‐

12.25‐‐‐‐‐‐



12

249CP (NPS 3 RF Flanged)Figure 7. Fisher 249CP (see tables 14 and 15)

A1351‐1

A1352‐1

SIDE VIEW

TOP VIEW

MATCH LINE (A)

297(11.69)

65(2.56)

MATCHLINE (B)

168(6.62)

210(8.25)

P

G

F

Dmm

(INCH)

Table 14. Fisher 249CP Dimensions D, F, and GSTANDARD DISPLACER AND STEM COMBINATIONS

D FG(1)

mm Inch mm Inch

603832

2.381.501.25

356813

1219

14.0032.0048.00

Specify.Maximum

length is 1372mm (54 inches)


Table 15. Fisher 249CP Dimension PP

CL150 RF CL300 RF CL600 RF

mm Inch mm Inch mm Inch

191 7.50 200 7.88 210 8.25



13

249VFigure 8. Fisher 249V (see table 16)

A1360‐1 A1359‐1

AVAILABLE WITH NPS 4 CL125 FF FLANGE OR NPS 4 CL150 THRU CL1500 RF FLANGE

305 STANDARD(12.00)

211(8.31)

38(1.50)

406(16.00)

TOP VIEWSIDE VIEW

D

MATCH LINE (A)

MATCH LINE (B)

G

F

mm(INCH)

Table 16. Fisher 249V Dimension D, F, and GSTANDARD DISPLACER AND STEM COMBINATIONS

D FG(1)

mm Inch mm Inch

7651413835

3.002.001.621.501.38

356813

121915241829

14.0032.0048.0060.0072.00

Specify.Maximumlength is

1372 mm(54 inches)

32292525

1.251.12

11

2134243827433048

84.0096.00

108.00120.00




14

249VS

LEFT‐HAND MOUNT RIGHT‐HAND MOUNT

Notes: 1 Dimension G is customer specified 2 Displacer length illustrated is 14 inches

712.5(28.05)

HEAT INSULATOR EXTENSION

mm(INCH)

1

343.6(13.53)

343.6(13.53)

76.2(3.00)

139.7(5.50) 139.7

(5.50)

606.1(23.86)

606.1(23.86)

355.3(14.00)

77.7(3.06)

76.2(3.00)

76.2(3.00)

355.3(14.00)

85.1(3.35)

85.1(3.35)

59.5(2.34)

139.4(5.49)

59.5(2.34)

139.4(5.49)

171.5(6.75)

66(2.60)

59.5(2.34)

1/2‐14 NPT2 PLACES

GE33695

GG

77.7(3.06)

59.5(2.34) 171.5

(6.75)66

(2.60)

76.2(3.00)

305(12.00)

305(12.00)

1

Figure 9. Fisher 249VS with DLC3010 / DLC3020f Digital Level Controller Controller Envelope Dimensions;Flanged Connections



15

Figure 10. Fisher 249VS with DLC3010 / DLC3020f Digital Level Controller Envelope Dimensions; Butt Weld End

Note: 1 Dimension D, F, and G are customer specified mm

(INCH)

1

344(13.53)

78(3.06)

403(15.87)

GE45167‐A

GG

BUTT WELD END PER CHART


A A

FF

607(23.88)

78(3.06)

� D

BUTT WELD END PER CHART

59(2.34)

139(5.49)

344(13.53)

483(19.02)

� D

1

1

� �

BUTT WELD END A

2.00BWE SCHED 40CL600

BWE SCHED 80CL900

BWE SCHED 160CL1500

BWE SCHED XXSCL2500

2.17

2.57

2.85

607(23.88)

59(2.34)

139(5.49)

DLC3010 / DLC3020f1/2‐14 NPTOUTLET CONN (2 PLACES)

DLC3010 / DLC3020f1/2‐14 NPTOUTLET CONN (2 PLACES)

OPTIONALHEATINSULATOREXTENSION

713(28.07)

1

1

1



16

Figure 11. Fisher 249VS with 2500 Transmitter Envelope Dimensions; Flanged Connections

Notes: 1 Dimension G is customer specified 2 Displacer length illustrated is 14 inches mm

(INCH)

1

343.6(13.53)

343.6(13.53)

76.2(3.00)

76.2(3.00)

139.7(5.50)

139.7(5.50)

521.5(20.53)

77.7(3.06)

355.3(14.00)

77.7(3.06)

76.2(3.00)

76.2(3.00)

355.3(14.00)

458.7(18.06)

238.9(9.41)

231.9(9.13)

GE33808

GG

238.9(9.41)

231.9(9.13)

467.5(18.40)

521.5(20.53)

171.5(6.75)

171.5(6.75)

85.1(3.35)

85.1(3.35)


305(12.00)

305(12.00)

1



17

Figure 12. Fisher 249VS with 2500 Transmitter Envelope Dimensions; Butt Weld End

Notes: 1 Dimension D, F, and G are customer specified mm

(INCH)

1

344(13.53)

78(3.06)

467(18.41)

GE45166‐A

GG

522(20.54)

BUTT WELD ENDPER CHART


A A

FF

522(20.54)

78(3.06)

� D

FISHER67 SERIES1/4‐18 NPTSUPPLY CONN

BUTT WELD ENDPER CHART

124(4.87)

115(4.53)

124(4.87)

115(4.53)

344(13.53)

67 SERIES1/4‐18 NPTSUPPLY CONN

459(18.06)

2500TRANSMITTER1/4‐18 NPTOUTLET CONN

2500TRANSMITTER1/4‐18 NPTOUTLET CONN

� D

1

1

��

OPTIONAL HEATINSULATOR EXTENSION

728(24.72)

BUTT WELD END A

2.00BWE SCHED 40CL600

BWE SCHED 80CL900

BWE SCHED 160CL1500

BWE SCHED XXSCL2500

2.17

2.57

2.85

1

1

1



18

249WFigure 13. Fisher 249W Dimensions for Mounting on Customer Supplied Cage

RIGHT HAND MOUNTLEFT HAND MOUNT

Note: 1 Dimensions D, F, and G are customer definedGE09610‐A

SIZE

NPS 3

NPS 4

A

mm INCHES

127 5.00

157 6.19

CL150, CL300, AND CL600

G G

FF

� D � D

73(2.87)

mm(INCH)

301(11.84)

203(8.00)

A A

73(2.87)

203(8.00)

301(11.84)

1 1



19

Controllers and Transmitters

Figure 14. Controller and Transmitter Dimensions; Fisher 2500 Controller / Transmitter

10A1211‐A22A9197‐BA1373‐1

AR5748‐B22A9197‐BA1374‐1

MATCH LINE (A)MATCH LINE (A)

216(8.50)

WITH HEAT INSULATOR

238(9.38)

109(4.31)

TOP VIEW

FRONT VIEWBACK VIEW

119

(4.69)

59(2.31)

MATCH LINE (B)

1/4‐14 NPTSUPPLY CONNECTION

1/4‐14 NPTOUTPUT

VENT

1/2‐14 NPTSUPPLY

BACK VIEW

FRONT VIEW

TOP VIEW

1/4‐14 NPTSUPPLY

MATCHLINE B

WITH HEAT INSULATOR

MATCH LINE (A)

MATCH LINE (A)

406(16.00)

216(8.50)

109(4.31)

238(9.38)

119(4.69)

REMOTE SET

1/4‐14 NPT REMOTELEVEL INDICATOR

59(2.31)

2500 CONTROLLER / TRANSMITTER

2500 CONTROLLER / TRANSMITTERWITH 2506 OR 2516 RECEIVER‐CONTROLLER mm

(INCH)

232(9.12)



20

Figure 15. Controller and Transmitter Dimensions; FIELDVUE DLC3010 / DLC3020f Digital Level Controller

1/2‐14 NPTCONDUIT CONN

DETAILED FRONT VIEW

125.7(4.95)

102.6(4.04)

102.1(4.02)

73.7(2.90)

mm(INCH)

END VIEW OF INSTRUMENT

1/2‐14 NPT2 PLACES

59(2.34)

66(261)

59(2.34)

139(5.49)

HEAT INSULATOR EXTENSIONFURNISH ONLY WHEN SPECIFIED

308(12.13)

WITH HEAT INSULATOR

202.4(7.97)

WITHOUT HEAT INSULATOR

Emerson Process Management Marshalltown, Iowa 50158 USASorocaba, 18087 BrazilChatham, Kent ME4 4QZ UKDubai, United Arab EmiratesSingapore 128461 Singapore

www.Fisher.com

The contents of this publication are presented for informational purposes only, and while every effort has been made to ensure their accuracy, they are notto be construed as warranties or guarantees, express or implied, regarding the products or services described herein or their use or applicability. All sales aregoverned by our terms and conditions, which are available upon request. We reserve the right to modify or improve the designs or specifications of suchproducts at any time without notice.

� 1980, 2012 Fisher Controls International LLC. All rights reserved.

Fisher and FIELDVUE are marks owned by one of the companies in the Emerson Process Management business unit of Emerson Electric Co. Emerson ProcessManagement, Emerson, and the Emerson logo are trademarks and service marks of Emerson Electric Co. All other marks are the property of their respectiveowners.

Neither Emerson, Emerson Process Management, nor any of their affiliated entities assumes responsibility for the selection, use or maintenanceof any product. Responsibility for proper selection, use, and maintenance of any product remains solely with the purchaser and end user.

fisher 249 sensor

Documents

w inch

f inch

match line b f w w f

npt cl250

f scrd npt

g f w match line b

dimensions f

connections match line