Finished Wall RestorationEVERLAST™ BASEMENT WALL SYSTEM

Your basement leaking is bad enough - but when your basement is finished, it’s much worse! The bottom of your finished walls are damaged, mold may appear, and rot and odors begin. Not a good situation.

When you don’t want to rip out your entire finished basement, and have to restore the bottom of your finished walls anyway, the EverLast Finished Wall Restoration System is a perfect solution!*

PN 11175

*Painting of the existing walls (or door trims) above the chair rail height is not included in this solution.

OVER

QUALITY IMPROVEMENT AWARD

INNOVATION PRIZE

WINNER

EVERLAST FINISHED WALL RESTORATION®

Restore the bottom of your finished walls, without ripping the entire basement out and starting over!

Panels are cement board, covered with a textured mold proof, washable, vinyl finish

EverLast panels combine the two most popular interior finish colors – off white and beige – laid in a designer pattern over a slightly alligatored vinyl

Trim is all plastic and installed over metal studs – no paint needed, and cannot be ruined by a plumbing leak or high humidity

Washable wall surface expertly hides wall marks and shine and is washable and never needs paint

50 Year Warranty on the EverLast Walls

If you need a perimeter drainage system, it’s the perfect time to install the WaterGuard system, which needs to be installed behind your finished walls to protect them

STEP 1

BEFORE: Bottom of existing walls

damaged, from water and high humidity.

STEP 2

Cut and remove the moldy, damaged drywall and bottom of the studs.

STEP 3

With the bottom of the finished wall removed, a

perimeter drainage system can be installed – as needed.

STEP 4

Replace the bottom of the wood studs with

metal studs.

STEP 5

Install mold-proof EverLast Wall Panels up to 32”, finish with pvc chair rail and trim. Install optional ThermalDry or MillCreek Flooring.

POWERED BY: