finepix s5 pro manual - fujifilm · memo • repeat the steps a-b to enter more letters. •press p...
TRANSCRIPT
OWNER’S MANUALThis manual will show you how to use your FUJIFILM DIGITAL CAMERA FinePix S5 Pro correctly.Please follow the instructions carefully.
BL00577-201(1)
Getting Ready
Using the Camera
Advanced Features • Photography
Settings
Camera Connection
SoftwareInstallation
• Playback
Appendices
Troubleshooting
146
U SET UP
SHOOTING
User comment of up to 45 characters (EXIF) can be entered when [TYPE IN/BARCODE] is set.
[TYPE IN/BARCODE]Manually enter or edit a comment of up to 45 characters (EXIF) by using the [INPUT COMMENT] screen (➝p.147). Data read using the [OFF/BCD MULTI READ] will be erased.The maximum number of characters is 45 when reading a barcode with the [BCR 1 SHOT] or [BCR CONTINUOUS] selected under [BARCODE READER/GPS]. In this case, the comment will be overwritten at each barcode reading.
[OFF/BARCODE]A comment manually entered by using the [INPUT COMMENT] screen will not be recorded when [OFF/BARCODE] is set (➝p.147).The maximum number of characters is 45 when reading a barcode with the [BCR 1 SHOT] or [BCR CONTINUOUS] selected under [BARCODE READER/GPS]. In this case, the comment will be overwritten at each barcode reading.
[OFF/BCD MULTI READ]A comment manually entered by using the [INPUT COMMENT] screen will be erased when [OFF/BCD MULTI READ] is set (➝p.147).The maximum number of characters is 248 when reading barcodes. Separate comments with comma (,) semicolon (;) or ampersand (&) when reading multiple barcodes.
Z Manually enter a comment
1 Activate [IMAGE COMMENT].
MEMO
• If [TYPE IN/BARCODE] is selected, a comment is added to all photographs taken.
• To not add a comment, select [OFF/BARCODE] or [OFF/BCD MULTI READ].
IMAGE COMMENT
APress n or o to select [TYPE IN/BARCODE].
BPress q.
IMAGE COMMENT IMAGE COMMENT
TYPE IN/BARCODETYPE IN/BARCODEOFF/BARCODE OFF/BARCODE OFF/BCD MULTI READOFF/BCD MULTI READ
How to use the SET UP menu (➝p.138)
147
Settings
2 Enter a comment.
MEMO
• Repeat the steps A-B to enter more letters.• Press p or q to select the letter to delete, then press n to delete.
• To insert a letter between other letters, press p or q to select the letter after the inserting position, then press o to insert.
3 Exit from [IMAGE COMMENT].
Store information from a barcode reader or GPS connected to a 10-pin terminal as Exif information.
[BCR 1 SHOT]Read barcode information for each shot and store it as comment information. Pictures cannot be taken without reading a new barcode.
[BCR CONTINUOUS]Store registered barcode information as comment information in every file. To erase the registeredinformation, read the “barcode eraser” on this page or delete the letters registered in the [IMAGE COMMENT].
[GPS]Store information from GPS device allowing latitude, longitude, altitude and UTC (standard universal coordinated time) to be recorded with photographs.
[OFF]No store barcord or GPS information is retrieved.
MEMO
• When the barcode information is stored, BCD is displayed in the control panel.
• The following ASCII characters can be used for the barcode information:(space), 0~9, _(under bar), A~Z (lower-case characters can be entered using barcode reader, however they cannot be reviewed or edited on the [INPUT COMMENT] screen.), ! ” # $ % & ’ ( ) * + - . / : ; < = > ? @ [ ] { }.Usable types of barcode depend on the specifications of the barcode reader.
Continued Q
ARotate the main-command dial to display the desired first letter to enter.
BPress q to enter the second letter.
Press MENU/OK.
INPUT COMMENTINPUT COMMENT
DONEDONE
1234567890_ABCDEFGHIJKLMNOP 1234567890_ABCDEFGHIJKLMNOPQRSTUVWXYZ!"#$%&' ( ) *+ , -> / : ;<QRSTUVWXYZ!"#$%&' ( ) *+ , -> / : ;<= > ? @ [ ] { }= > ? @ [ ] { }
DELETEDELETE INSERTINSERT
BARCODE READER/GPS
How to use the SET UP menu (➝p.138)
169
Settings
To avoid mis-use, lock the functions of the command dial, [SHOOTING MENU] and [SET UP] menu.
[LOCK SETTING]Select [ALL FUNCTION], [SELECTED FUNCTION], or [BASIC FUNCTION] for the [LOCK SETTING].
[FUNCTION SELECTION]Specifies functions to be locked when [SELECTED FUNCTION] is selected for [LOCK SETTING].
[CHANGE PASSWORD]Change password when [LOCK SETTING] activates.
These functions can be specified by the [SELECTED FUNCTION]
The functions to be locked by the [BASIC FUNCTION]• All options in the [SET UP] menu (except [FUNCTION
LOCK], [FORMAT]).• Auto bracketing• Two-button reset
MEMO
• The following functions can be used even when [FUNCTION LOCK] is set.- Playback (w, )- Release (AF-ON button, AE-L/AF-L button)
• Specify the functions using [FUNCTION SELECTION] before setting the [SELECTED FUNCTION] under [LOCK SETTING] (➝p.170).
Continued Q
FUNCTION LOCK
UNLOCK Releases the lock for functions.
ALL FUNCTION Locks the fucntions which can be locked in [BASIC FUNCTION] and the functions which can be specified in [SELECTED FUNCTION].
SELECTED FUNCTION
Locks the specified functions. To specify the functions, use [FUNCTION SELECTION]. The functions locked by the [BASIC FUNCTION] will also be locked when the [SELECTED FUNCTION] is set.
BASIC FUNCTION
Locks all functions except the functions which can be specified by the [SELECTED FUNCTION].
• FORMAT• ERASE• APERTURE• SHUTTER SPEED• EXP.COMPENSATION• TONE/COLOR/SHARP• D-RANGE• COLOR SPACES• FILM SIMULATION
• QUALITY• WHITE BALANCE• ISO• NOISE REDUCTION• EXPOSURE MODE• FLASH COMPENSATION• MAINTENANCE• DATE/TIME-TIME DIF• FILE TAG OPTIONS
How to use the SET UP menu (➝p.138)