final-year course in mechanical engineering design
TRANSCRIPT
Final-year course in Mechanical Engineering Design
IN THE MECHANICAL ENGINEERING
MSc PROGRAMME AT
LULEÅ UNIVERSITy OF TECHNOLOGy
2006
SIRIUS 2005/06 IS A COLLABORATIVE PROGRAMME
involving Luleå University of Technology in collabo-ration with the Polhem Laboratory partners Volvo Aero Corporation, Volvo Car Corporation’s design center Volvo Monitoring and Concept Center, Hägglunds Drives AB and several other industrial and academic partners. Sirius prepares students for work in product development. The product development projects of this course are firmly based on close collaboration with manufacturers or on real product development needs identified in other ways. Work is conducted in project groups with the support and guidance of academic and industry advisors.
Collaboration benefits both students and industry partners.• Students are given an opportunity to apply their knowledge when developing proposals with optimal solutions to real design problems with a limited time frame and budget. A unique insight into present and future working methods and cooperation in product development is gained.
• Manufacturing companies gain access to innovative product development performed by well-educated engineers who are unbiased by traditional modes of thinking and problem solving.
Luleå University of Technology and industry partners in collaboration
Pho
to w
ith p
erm
issi
on
of
Volv
o M
oni
tori
ng a
nd C
onc
ept
Cen
ter
�
Creative product development
Sirius is a final-year course for students in the Mechanical Engineering MSc degree programme at Luleå University of Technology. Sirius is also open to final-year students from other MSc engineering pro-grammes at the university, thereby ensuring a broad base of knowledge for the course’s project groups. During most of the 20-credit course, product devel-opment projects are conducted in close national and international collaboration with companies and uni-versities.
The aim of Sirius is for students to acquire, apply and integrate knowledge considered essential for prod-uct developers in modern manufacturing industries. Students gain knowledge in project management, pro-duction of creative concepts, mechanical engineering design and computer-aided design, as well as command of all stages in the integrated product development chain, from needs analysis to the finished product. Under realistic industrial conditions, they must carry out product development in teams, in collaboration with manufacturing companies or based on real prod-uct development needs presented in some other way. Experience from Sirius prepares the participants well for teamwork with colleagues from other disciplines.
Students also take courses in product development methods, computer-aided modelling and analysis, and
project management as a support to their development projects.
Sirius students engage in a valuable exchange of knowledge and ideas with graduate students and staff from the Polhem Laboratory and other departments of Luleå University of Technology. Not only do Sirius students from Luleå University of Technology have solid theoretical knowledge, they also have the benefit of valuable experience from work in an integrated environment and the use of advanced computer tools in industrial projects.
For more information about previous Sirius projects, please visit www.cad.ltu.se/sirius.
traditional produCt development
integrated produCt development
Concept
manufacturing
design testing
Concept design testing manufacturing
�
PRODUCT DEVELOPMENT PROJECTS
Manifold for rocket engine nozzle
Volvo Aero Corporation
Students were given the task of developing an interface between a manifold and a rocket engine sandwich nozzle. The design of the interface had to contain proposals for design, manufacturing method and material. Reindeer versus Predator
PolhemRegio and Sarekren
During recent decades, the number of predators has increased to a level that has put reindeer keepers in a bad economical situation. A design group of seven engineering students worked with a Sámi reindeer keeper with the purpose to decrease reindeer losses and bring reindeer herding into the 21st century with new technical solutions. New innovative brake concept
Hägglunds Drives AB
A student design team developed a completely new and cost efficient combined emergency and parking brake for Hägglunds Drives hydraulic motors. The design project involved intense simulation.
Rethinking blood-glucose monitoring
Abbott Laboratories
Students from LTU and Stanford University, USA collaborated in this global project to develop a new type of glucose monitoring system for children with diabetes. The project’s success has been dependent on the daily global collaboration and communication. Innovative Door Opening Solution
VCC and VMCC
Students from LTU and Chalmers collaborated with Volvo Car Corporation’s design center, Volvo Monitoring and Concept Center in Camarillo, California, USA, in an international distributed collaborative engineering design project. The project’s aim was to develop an innovative door opening sys-tem for a two-door vehicle that improves the ingress/egress to the car and minimizes door opening and closing efforts. Future Elderly Environment
Polhem Laboratory
In this international project, students from LTU and Stanford University worked together to develop a product that enhances the wellbeing of the elderly. Formula SAE
Polhem Laboratory
The students involved in the Formula SAE project developed and fabricated a complete racing car to compete in the international Formula Student event in Bruntingthorpe, England.
Sirius 2005/06
Sirius 2005/2006 is the final course in
the Mechanical Engineering Design pro-
gramme at Luleå University of Technology
(LTU), which this year involved seven
different product development projects
where students from LTU collaborated
with other universities and industry
partners.
�
INTRODUCTION
The Sirius course started in September 2005, with presentations of project proposals from the companies Hägglunds Drives, Volvo Aero Corporation, Volvo Car Corporation and Abbot Laboratories. The proposed projects within the university this year were Design for Wellbeing, Formula SAE and the PolhemRegio and Sarekren project Reindeer vs. Predator.
The different projects contained various tasks, such as engineering design, need finding, computer aided engineering and manufacturing, ensuring a diverse project portfolio with interesting tasks for each student. The final composition of the groups was decided after evaluation of the students’ personal preferences.
THE CREATIVE PHASE
After the needs were surveyed, the project teams used different methods to fulfil them. Brainstorming and brain writing helped the teams to think outside the box and discover unique solutions. The concepts of the project teams were assessed and evaluated with assigners and industry representatives to evaluate which concepts the groups would continue to work with. 3-D CAD software such as I-deas, Unigraphics NX3 and Alias Studio Tools were used with the simu-lation software MSC.MARC and ADAMS to realize the concepts.
PROJECTS
The projects started with electing a project manager. A plan for the future work was detailed as well as a budget covering the financial aspects of the projects. After the initial preparations the different teams set off on their own. The work began by examining the given tasks and then generating some possible solu-tion concepts. All teams used online communication tools such as collaborative workspaces, instant messag-ing and videoconferences to keep track of the work-ing material and to communicate within the group, and in some cases, their affiliates and partners.
The Abbott team researched the needs of child diabetics by conducting surveys and interviewing local expertise. The primary goal was set to create an easy to use and helpful glucose monitoring system. A secondary goal was to give the children’s parents a good way to follow how their children handle diabetes.
Developing and fabricating a highly competitive race car for the Formula Student event was the main goal of the Formula SAE team.
The future elderly environment project aimed to develop a product based on the present and future needs of the elderly. The idea for the final product originated from one of the conceptual prototypes made during the project.
The HDAB brake project focused on designing a cost efficient brake with enhanced technical per-formance. The project’s main issues were to reduce the number of components and brake dimensions by
making use of the shaft’s rotation to multiply the force applied to the brake.
The main purpose of the Reindeer vs. Predator was to develop a unit to prevent predators from attacking female reindeer.
In the VAC project, the main focus was to find an interface between the manifold and the sandwich nozzle. To meet VAC requirements, several simulations were performed as well as material selection.
The task in the VMCC project was to make an innovative door opening solution for two-door cars that park in narrow spaces. A full-scale physical pro-totype was manufactured to test the functionality and reliability for every day use as accurately as possible. The prototype evolved through the use of product development methodologies and modern CAE tools.
�
Background
VAC has developed a new nozzle technology for con-vectively cooled nozzles. The sandwich technology is based on channels inside the nozzle structure that are assembled like a sandwich.
Assignment
The assignment for the project was to develop an interface between the manifold and the sandwich nozzle channel wall. Placed on the outside of the nozzle, the manifold’s function is to collect the cool-ant, i.e. the fuel, from the nozzle and transport it from the manifold to the combustion chamber. The design is limited by weight, pressure and extreme heat expo-sure.
Volvo Aero CorporationManifold for rocket engine nozzle
An Ariane 5 rocket during take-off.
Volvo Aero Corporation (VAC) manufactures and develops
components for the aircraft and space propulsion industry,
where they are one of the largest manufactures of nozzles
to commercial space rockets. In the 1970s, VAC joined the
Joint European Space Programme and began to manu-
facture the thrust chambers for the Viking
engines of the Ariane launch vehicle.
Today, their main focuses are the
development and manufacturing of
nozzles and turbines for the space
industry.
The upper part of the nozzle.
�
Analysis
Besides transporting fuel, the manifold’s main function is to act as a stiffener to the nozzle structure. During the first brain-storming session, many ideas were gener-ated and many concepts were evaluated in several steps through different matrixes. In collaboration with VAC, three concepts were selected for FEM simulation and analysis. After several simulations, modifica-tions and analysis, a final concept satisfying all requirements was presented to VAC.
Results
The final concept was mainly based on the manufacturing technology Metal Deposition (MD), where the interface is added on with a laser fusion process. This technology assures very close tolerances and solidity. The structure is composed of a super alloy to withstand the high tem-peratures during lift-off. During the project, the group learned how a product develop-ment process works from idea to concept choice and preliminary analytical verifica-tion. The Sirius course has given us experi-ence and knowledge of how it is to work with real industry projects.
JAN HäGGANDER
Senior Design Engineer
Combustion Chamber and Nozzles
The SIRIUS-team has demonstrated leader-
ship and a professional attitude in pursuing
the project. The planning was clear and
the goals were met. The students quickly
grasped the task and demonstrated the
ability to use good engineering judgment in
generating concepts and in down selection
between the concepts. The specification
leaves little parameter room for successful
design of the rocket nozzle cooling manifold.
In spite of this, interesting concepts were
generated and plastic thermo-mechanical
verification analysis showed the demanding
specification to be fulfilled.
The final interface
and manifold.
�
Reindeer versus PredatorPolhemregio and Sarekren
Background
For hundreds of years, the Sámi have lived on what nature has had to offer, the largest income com-ing from herding reindeer, along with fishing and hunting. During the last few decades, the number of predators has increased and reached a level that has set reindeer keepers in a dire economical situation.
Assignment
Develop a unit that prevents predators from attack-ing female reindeer, which are more valuable than male reindeer since female reindeer will give off-spring. The unit has to withstand extreme climate, i.e. temperature and humidity, and the collar has to be expandable to be attached onto young reindeer. The project also considered the natural behaviour of the reindeer, thus delimiting the size and weight of the resulting product, so that the reindeer are able to carry the unit for many years.
A design group of seven engineering students worked
with Sarekren with the purpose to decrease the loss of
reindeer through technical solutions that bring reindeer
herding into the 21st century.
�
Pho
to: M
agnu
s E
land
er
Reindeer’s worst
enemy, Lynx.
Prototype attached on reindeer.
Design proposal.
Method
There is no commercial product worn by livestock that actively protects them against predator attacks; hence, a significant amount of time was spent in surveying the needs. The Internet, books and data-bases were used to gather information and gain an increased understanding of the problems and their possible solutions. The information and feedback that Sarekren provided helped the students during the entire project. Several brainstorming sessions were conducted in different work phases to generate ideas and solutions and creatively solve any kind of problems. Concepts were evaluated in collaboration with Sarekren and one concept was selected for the electrical application and three concepts were selected for the expandable collar. In the detail design phase, Computer Aided Engineering software such as I-deas and MSC. ADAMS were used to build virtual models and conduct toughness tests.
Results
In an early stage the group aimed the work to prevent attacks caused by Lynx since they cause the greatest loss of reindeer in the area where Sarekren keep their reindeer.
Ten prototypes were manufactured and applied on reindeer in their natural environment. The prototypes were evaluated by the design team during a one week long trip with the purpose to assess if the prototypes affected the natural behaviour of the reindeer.
The prototypes are also to be evaluated during the coming years by the assigner.
�
The students improved their skills in modern product development and learned much about the Sámi culture and reindeer herding. They have also acquired great knowledge in manufacturing methods and electrical applications. The project has shown the strength of what fresh thinking and unconventional problem solving approaches of young engineers can accomplish.
The Reindeer vs. Predator team
at the summit of mount Aime,
928 metres above sea level.
Lars-Anders Gillenbjörk – Sarekren.
10
HDAB New innovative brake concept
Background
Hägglunds Drives AB is a Swedish company special-ized in delivering complete high torque hydraulic systems. An eight-student design team has been working with Hägglunds Drives for nine months to develop a new brake for their hydraulic motors.
Assignment
The assignment from Hägglunds Drives AB was to develop a completely new combined emergency and parking brake. The brake is a crucial system compo-nent that works as a backup if the first system fails. Therefore, reliability was of the utmost importance and Det Norske Veritas (DNV) had to approve the brake.
Substantially lowered manufacturing costs, enhanced technical performance and maintained reliability compared to their current brake were identified as main project objectives. To lower manu- facturing costs the new design had to be smaller
To stay ahead in a high-tech market with ever-growing
competition, companies like Hägglunds Drives AB need
to continuously update and improve or replace their com-
ponents. In this case, they needed to cut manufacturing
costs and enhance the technical performance of their
MDA brake series. The task of the students was to design
a completely new and innovative brake to replace the
MDA brake.
Students working in live projects such as this enable
the company to see issues from another perspective, with
fresh ideas and new technology, as well as create strong
positive relationships with university students.
3D Topography scan of friction material after tribology testing with Vision32.
11
and contain fewer parts. Maintained reliability meant amongst other things that the brake had to be fail safe, fatigue safe for pulsating force, have an activation time of less than 25 ms and deliver a constant high torque (approximately 50,000 Nm) when activated.
Computer Aided Engineering
Digital models of design concepts were evaluated in a virtual environment to speed up the design proc-ess. 3D-models were created in I-deas and optimised in terms of strength and size using methods such as FEM. Dynamic and static simulations were carried out in MSC.ADAMS and Simulink, which proved to be crucial in guaranteeing proper function before manufacturing the prototype. The use of a shared online workspace allowed for project material to be available to project personnel independent of loca-tion. Combined with frequent videoconferences with company representatives, this made the physical distance between company and design team less of an issue.
Results
Design concepts were generated through various intensive brainstorming sessions. After the concept evaluation phase, the team devised a new and innova-tive brake design. The outer dimensions were reduced and technical performance enhanced, allowing for steel balls to be used in an ingenious servo application together with the use of the rotational speed from the motor’s shaft. A prototype was manufactured for visual inspection and function testing. The complete design concept was delivered to Hägglunds Drives AB at the end of May 2006. The group members developed their ability to function as a part of a project team with given roles and individual fields of responsibility. The close cooperation with an international company such as Hägglunds Drives AB provided the students with valuable insight into the complexity of an indus-trial product development process.
Brake cover with grooves and balls,
an important feature of the servo
application.
12
AbbottRe-thinking the user interface of blood glucose monitoring
Background
The project was initiated by Abbott Laboratories and performed with their close collaboration. Abbott Laboratories, based in Alameda, California, is one of the largest companies in the diabetes care sec-tor. Today’s market is moving towards usability and design.
Assignment
The assignment was to re-think the user interface of blood glucose monitoring systems, including gener-ating design concepts and prototypes that consider mechanical inputs, the graphic design, human factors and data management.
Abbott Laboratories sells their products world-wide – an important consideration in the design
The project is a global collaboration between LTU and
Stanford University. Four students from each university
formed the global design team, whose goal was to
generate innovative solutions and create a concept
for an intuitive blood glucose monitoring system for
children with diabetes.Concept sketch.
1�
process. Another difficulty was the large spectrum of diabetics, ranging from children with diabetes type I to elderly people with diabetes type II.
Design process
Since large distances separated the team, the coopera-tion relied greatly on communication technology. The work was conducted with the Sirius master plan and Stanford’s deadlines side by side. Based on the ini-tial need finding, the team chose to concentrate on child diabetics.
Focus of the process was on need finding to understand the user’s view of glucose meters and diabetes. Interviews and surveys were used to collect
knowledge and opinions from diabetics and healthcare professionals, providing an understanding of the dis-ease and everyday problems related to diabetes. The knowledge was transformed into software fea-tures, interface solutions and several design concepts.
In February, two Stanford group members visited Luleå and the LTU members visited Stanford in April.
To achieve collaboration over large distances, videoconference systems, instant messaging and shared virtual working environments were extensively used.
Engineering software, such as Alias StudioTools and Unigraphics NX3, was used simultaneously with traditional techniques like clay modelling and sketch-ing to illustrate concepts throughout the design process.
Result
The decision regarding the final concepts was done after meeting Abbott Laboratories representatives in California. The result is a blood glucose monitoring system that targets primarily children followed by their parents during the transition phase when child diabetics begin to take responsibility for their own care. Knowledge about conditioning and positive reinforcement was implemented into a medical device with the purpose to improve the overall diabetes per-formance of children. Several features were included to improve the children’s knowledge of their disease. The global design team created a design that considers children and their parents.
The Team: Ihab Daouk, David Yao, Karthik Manohar,
Maria Marklund, Elin Karlsson, Maria Hedin, Erik Mossing.
Nick Reddy is absent.
Concept sketch.
1�
Background
VMCC designs concept cars and predicts and moni-tors trends in the automotive industry. Most new Volvo cars are designed at VMCC, one of the leading car design centers and trendsetters in the world.
Assignment
The main focus in this project has been to develop an innovative new door opening solution for two-door cars that improves the ingress and egress of the car and minimizes the opening-closing effort. The design-team consisted of students from Luleå University of Technology, Chalmers University of Technology.
To collaborate on a daily basis, the distributed design team used videoconferences and a common project portal from which information could be shared.
VCC and VMCCInnovative Door opening solution A design-team from Luleå University of Technology and Chalmers worked together in an international distributed collaborative engineering design project. An innovative door opening solution for the concept car 3CC was developed in collaboration with Volvo Car Corporation’s design center, Volvo Monitoring and Concept Center (VMCC) in Camarillo, California, USA.
Volvo concept car 3CC. Innovative door opening solution
for Volvo concept car 3CC
1�
Project evolution and result
In the early design phase, design ideas were generated using vari-ous design theories and methodologies. The project evolved from various ideas in different concepts. Modern CAE-tools such as Ideas and Unigraphics NX3, MSC.ADAMS and MSC.MARC were used to design, simulate and analyse mechanisms and parts. A virtual prototype was made and one full-scale physical proto-type of the doorframe and the opening mechanism was manu-factured. The prototypes were sent to Volvo for further validation and testing.
LARS ERIk LUNDIN,
Vice President and General Manager VMCC
The SIRIUS team was assigned a challenging task to invent a new door
opening system for a Volvo concept car. Their efforts were directed at the
3CC, a small two door car with long doors. Any improvement over exist-
ing and well proven door systems is an ambitious goal. The design had to
be unique and innovative but still meet challenging performance require-
ments for robust operation and provide good accessibility when parked in
narrow parking spaces. The design also had to be feasible for production.
The team has created a design solution that meets our expectations. We
will incorporate the results of their design work in the concept develop-
ment activities at VMCC. It is also worth mentioning that the design effort
involved two groups of students from two universities. Their collaborative
working methods will contribute toward advancing the state of the art of
distributed engineering design. We are pleased to have this cooperation
with the students of Luleå University of Technology and Chalmers Institute
of Technology.
kOLITA MENDIS,
Structures and Safety Engineering Manager, VMCC
The SIRIUS team investigated unique door opening solutions for our small
car concept. They have made a careful assessment of all issues starting
with market research to understand the needs of customers, then pro-
ceeding to ergonomic evaluation and mechanical design. They have pre-
sented us a concept that is interesting and unique while meeting a set of
demanding functional requirements. They have demonstrated the ability to
successfully work together in a collaborative setting. The participation of
the students from Luleå University of Technology and Chalmers Institute of
Technology brings in fresh new input to our concept development work.
The Sirius-VMCC
team visiting VMCC
in Camarillo, USA.
Finite element analysis
of detail in door opening
mechanism.
1�
Future elderly environments
Background
Elderly care is changing. The expected retirements of many born in the 1940s combined with the limited resources in elderly care means that fewer employees will care for more elderly. Employees have a variety of technology to facilitate their work, e.g. lifts and alarms, though technological solutions are limited to increase the wellbeing of the elderly.
The team is convinced that the quality of life for the elderly can be improved in many ways.
Assignment
The mission was to enhance the wellbeing for peo-ple in their latter part of life. This statement was all the team had to start out with. To achieve this, the meaning of ‘wellbeing for elderly people’ had to first be investigated. To narrow down the task the global design team chose to focus on people living at eld-
In this international project, students from LTU and Stanford University worked together to develop a product that enhances the wellbeing of the elderly.
The main goal was to develop a product based on the present and future needs of the elderly.
Testing prototype on elderly home.
3D model in Alias, Studio Tools.
Göran is adding an idea in a brainstorm session.
and promotes social interaction between the elderly and relatives will increase the wellbeing of the elderly.The presented product will be implemented at a new elderly home in Luleå.
1�
erly homes. The project began with a need finding process to discover the needs of the users, and later translate those needs into concepts. From the needs found, certain activities were singled out and focused upon. The team proceeded to develop a solution that met the requirements and thereby could enhance the wellbeing for people living at elderly homes. The use of conceptual prototyping to create various artefacts during the project was emphasised. Implementing the final prototype for users in a new retirement home is the goal. The project was unique because of its heavy focus on the needs of the users and their participation in the product development process.
Collaboration
The whole project was conducted through global collaboration between four students from Luleå University of Technology, and four students from
Stanford University, USA, working together as a team. This proved to be a challenging task due to the two universities having different theories of approaching product development and cultural and geographical separation. The experience of working internationally was still worthwhile, since diversity in views offers the best ideas of two worlds. Each group contributed with their professional and personal skills to the process and brought different points of view into the design process.
The Result
In this open-ended project, the team members devel-oped a product based on the needs revealed through their need finding. Interactions between the elderly and even their relatives were infrequent. The elderly have much to tell and if their stories and knowledge disappear, it is our loss. A product that is individual
The Future elderly environment team.
Fieldtrip at Lytton Garden. Distributed collaborative work. Palm drive: The entrance of Stanford University.
1� 1�
Formula SAE STATIC EVENTS
Presentation 75
Engineering Design 150
Cost Analysis 100
DyNAMIC EVENTS
Acceleration 75
Skid-Pad 50
Autocross 150
Fuel Economy 50
Endurance 350
Total Points 1,000
Graphic design: [email protected]
The Formula SAE team has developed a complete race
car for the Formula Student competition in England.
To compete successfully in England, the car
has to be able to gather points in various
areas. This challenges participating teams
to be creative and innovative, while
managing time and
cost issues.
Background
Formula SAE started in 1981 in the USA as a com-petition for students to compete in engineering and design. Today, this global competition attracts hun-dreds of teams every year from all over the world that enter one or more of the six events held in Australia, Italy, Brazil, Great Britain and the USA. Formula Student is the competition in England where four previous cars from Luleå have participated.
Assignment
The assignment was described at the presentation of the projects in September. The main goal was to develop and fabricate a highly competitive race car for the Formula SAE series, following in the footsteps of four previous cars. The car had to be tested for at least 20 laps on 5 separate occasions before the pres-entation on May 19. The weight of the car could not exceed 195 kg and acceleration from 0-75 metres, which is one of the events, could take no more then 4.1 seconds. A top 10 finish in the design event, a better economical strategy and a higher theoretical knowledge of the car were additional goals.
Development
Two project leaders, one technical and one adminis-trative, were initially appointed. The team was then divided into three subgroups - engine, driveline and chassis. Students from other parts of the university
1� 1�
were recruited to handle the electronics and eco-nomical aspects.
Product development of all parts of the car was distributed among the three subgroups. Some solu-tions of the previous car were retained to ensure that the goal of a test period would be met.
The use of Computer Aided Engineering enabled the team to simulate, for instance, rigid body dynam-ics and fluid dynamics, as well as permitting the use of Computer Aided Manufacturing.
Fabrication of the car involved, among other things, carbon fibre moulding. This was a new expe-rience where the students learned how to fabricate carbon fibre sandwich structures.
New features of the car included a carbon fibre sub frame, the rear part of the chassis, and an engine without a turbo. The engine group realized that the restrictor, which limited the amount of air into the
engine, greatly reduced the benefits of a turbo. It was thus decided to enhance the performance of the engine by optimising the intake and exhaust systems instead.
Results
The team successfully developed and fabricated a fully functional racecar for the Formula Student event. The decision to run the engine without the use of a turbo proved wise, and meant a decrease in weight and cost and an increase in reliability and drive-ability.
The car weighs less than 190 kg and has a max power output of 90.5 bhp. These figures and the dynamic properties of the suspension should ensure a highly competitive race car.
These figures might be improved before the competition in July with increasing driver abilities and further development of the car. For additional
information on the project, please visit the project’s homepage at www.formulasae.ltu.se.
Finally, a huge thanks to sponsors and all com-panies that have supplied the team with parts, know-ledge and time. The project is dependent of your resources and expertise.
Simulation of rear suspension. Fluid dynamics simulation of the intake. Driveline assembly.
The Formula SAE team.
20
HANS FOLkESSON,
SENIOR VICE PRESIDENT
Research & Development
Volvo Car Corporation
At Volvo Cars, we are
pleased to be part of the
Sirius Project, which is an
excellent example of coop-
eration between university and industry.
Here enthusiastic students, who solve problems with a
fresh approach, are able to meet with us in the industry and
share our experiences. Furthermore, the student gains con-
tacts that might prove to be advantageous when they later
on apply for a job in industry.
This program also gives students a taste of the challeng-
es that the industry has to face; i.e. bringing better products
to the market faster, with higher quality, more environmen-
tal friendly, safer and at lower cost. Using an integrated
approach, as the Sirius Project suggests, is a true advantage
in order to achieve these goals.
To conceive and create a product according to these
principles is a great learning experience and we are looking
forward to continue the successful collaboration with Luleå
University of Technology.
BENGT-OLOF ELFSTRöM,
RESEARCH DIRECTOR
Volvo Aero Corporation
The Sirius project is an
important element of Volvo
Aero’s technology-, human
resources- and recruit-
ing strategy. It strengthens
Volvo Aero’s 20-year collaboration with Luleå University of
Technology and provides a basis for research- and final
degree projects. Present and future product development
will have an ever-greater focus during the early stages on
enhanced creativity and interaction in the requirement speci-
fication process between business development, products,
services and work in a virtual design environment. For Volvo
Aero’s development in this area, with new modes of work-
ing and new methods and tools, the Sirius project plays an
important role.
At the same time, the project gives participants an
understanding of how the company and the university can
cooperate on joint development of human resources. The
Sirius project also gives rise to creative new design solutions
that will be incorporated in our demonstration project for the
EU’s 6th framework programme, and subsequently, in our
products.
Industry and academia in collaboration
21
PETER THOR,
SIRIUS ENGINEER 2004/05
Volvo Aero Corporation
I was one of ten students
taking part in 2004/2005
years Volvo Aero Corporation
project group. Our task was
to develop a design concept
for a component called a
Turbine Exhaust Case – a structure positioned in the rear of
a jet engine with the main purpose of withstanding intense
mechanical and thermal loads.
During Sirius I gained experience in project planning,
how to evaluate an evolving design and living up to specific
requirements under a limited amount of time. It was impor-
tant to effectively utilise our individual key competence while
at the same time work as a team towards the common goal.
Participating actively from the very beginning in a project
where conceptual ideas flourish, leading on to the delivery
of a prototype at the end of the course, was very rewarding.
Sirius met my expectations on a final-year course since
it allowed me to practically use the knowledge I had learned
throughout the years in a bigger perspective. I recommend
Sirius to anyone seeking knowledge in how product devel-
opment in the industry can be carried out – while still being
a student.
After having completed my final thesis at Volvo Aero
Corporation I was given the chance to continue at the same
company. I currently work with developing tools and meth-
ods that aim to increase the efficiency of the engineer within
multiple fields of product development.
JOHANNA SAHLSTEDT,
SIRIUS ENGINEER 2004/05
Scandinavian Health Ltd.
Contributing to SIRIUS –
Design for Wellbeing was for
me more a coincidence than
a natural choice.
I participated in a couple of
brainstorming sessions for
Design for Wellbeing and became interested. When I was
asked whether I would like to be a member, the obvious
answer was YES. But I would never have imagined that
this choice would become such a big footprint in my future
career.
As earlier mentioned, I participated in Design for
Wellbeing with the chosen theme Future Playgrounds.
The path was long and winding, but with a lot of fun and
learning, including a nice trip to California. We went from
research, brainstorming, concept development, etc. to
finally ending up with a virtual playground at Teknikens Hus
in Luleå.
When I applied for master’s thesis work I was convinced
that I wanted to work within Product Development. I ended
up at SCA developing tissue dispensers for high traffic
washrooms in Gothenburg. After, I continued as a product
developer at Scandinavian Health in Stockholm developing
products for physically disabled persons. Now, I’m a Project
Leader for mattresses that prevent pressure ulcers.
The future? Only time will tell.
Industry and academia in collaboration
22
The Polhem Laboratory at Luleå University of Technology is one of 23 Swedish centres of excellence with partial funding from VINNOVA, the Swedish Agency for Innovation Systems.
Ideas from the Polhem Laboratory
are key concepts of the Sirius
project:
• Integrated and parallel working methods• Close collaboration with industry
The goal of the Polhem Laboratory is to simultaneously develop methods that will shorten lead-times in the product development process, reduce the costs of product development and product support, and improve the quality of the design system and flexibility in the organization.
Research within the Polhem Laboratory focuses on the following areas: simulation, communication of information within product develop-ment and concept development. The
projects of the Polhem Laboratory are conducted in cooperation with divi-sions of Luleå University of Technology, member companies and often interna-tional partners.
Member companies of the Polhem Laboratory are AB Sandvik Coromant, Aerodyn AB, BAE Systems Hägglunds AB, Ferruform AB, Hägglunds Drives AB, Metso Panelboard AB, MSC.Software Sweden AB, SKF Sweden AB, Vattenfall AB Vattenkraft, Volvo Aero Corporation and Volvo Car Corporation.
The methods applied within the Sirius project are also supported by research carried out within the frame-work of the ProViking programme. ProViking is funded by the Swedish Foundation for Strategic Research (SSF) and involves the participation of The Division of Computer Aided Design and Division of Machine Elements.
Furthermore, the results from the VIVACE project, described in more detail to the right, have provided
students with useful insights about state-of-the-art tools and methods for Knowledge Enabled Engineering, which prepares them well for their future work in globally dispersed product development teams, where knowledge ánd expertise is distributed across organizational and functional borders.
University partners in the Polhem Laboratory are the Divisions of Computer Aided Design and Machine Elements at the Department of Applied Physics and Mechanical Engineering.
World-class research is being con-ducted at the Department of Applied Physics and Mechanical Engineering, which is responsible for the disci-pline Engineering Design within the Mechanical Engineering programme. The Division of Computer Aided
Design has the principal responsibility for the final year course called Sirius in the MSc degree programme in Mechanical Engineering Design. Sirius is a result of the Polhem Laboratory and the department’s leading-edge research and excellent contact network within the Swedish industry.
The Polhem Laboratory
PROFESSOR LENNART kARLSSON,
Division of Computer Aided Design
and the Polhem Laboratory,
Luleå University of Technology Pho
to: A
teljé
Gro
dan
www.rolls-royce.com
PolhemRegio is a project that offers an opportunity to small and medium size companies in the regions of Norrbotten and Västerbotten to refine and introduce strategies for the product development process. The companies are manufacturing companies in the metal, wood or plastic industries as well as innovator proposed projects. The project uses the results of research conducted within the Polhem Laboratory and applies it to the local companies.
The goals of the project are to increase product development knowledge and refine the companies’ product development processes through implementation of a systematic product development strategy using 3D CAD and simu-lations to verify the product, and distributed engineering to permit working at different locations and meeting the costumer’s needs.
Researchers at the Division of Computer Aided Design at LTU are taking part in VIVACE [www.vivaceproject.com], a 70MEURO Integrated Project in the EU Sixth Framework Programme (FP6). The acronym stands for ‘Value Improve-ment through a Virtual Aeronauti-cal Collaborative Enterprise’. The main project goal is to support the design of a complete aircraft with engines by providing increased simulation capabilities throughout the product-engineering life cycle. Briefly stated, the goal is to create a ‘virtual product’ in a ‘virtual enterprise’ – thereby aiming to achieve a 5% cost reduction in aircraft develop-ment, a 30% lead time reduction in engine development and a 50% cost reduction in engine development. LTU is active in two of three VIVACE sub projects:• Virtual Engine – a specific global product work area that develops the different engine modules of the aircraft propulsion
The results of the project are the following:• The involved companies will increase efficiency and flexibility.• New companies are formed due to the cooperation of companies participating in the project. • The companies get new products developed according to the method.• Engineers with a master degree in mechanical engineering are recruited to the companies to manage and use the implemented method.
The project is a Mål 1 project,
partly financed by EU struc-
tural funds, the County
Administrative Board of Norrbotten and
Luleå University of Technology.
system and key areas of multi-disciplinary, optimisa- tion, knowledge management and collaborative enterprises.• Advanced Capabilities – a key integrating work area that develops common tools, methodologies and guidelines to be shared amongst the developments in the previous two work areas and provides for further integration of these two. In particular, LTU’s participation is directed towards new methods and technologies to share knowledge and expertise in virtual enterprises.
PolhemRegio VIVACE
www.airbus.com
2� 2�
The vision of a sustainable society forces industrial development into new ways of conducting business. An important way forward is to provide functions rather than the product (i.e. the physical artefact) itself. This means that the product provider will be respon-sible to deliver the function throughout the life-cycle of the product. The product provider will then own the product and be responsible for all costs to develop, manufacture, support and continuously upgrade the product.
Customers who have until now expressed their needs in relation to the physical artefact, i.e. a technical specification, have begun to express what they expect the physical artefact should bring about in their use of the artefact. This shifted view is captured in the concept of Functional Products. An integration of the hardware, software and service aspects is the starting point with the intention to provide customers with a more encompassing offer, the total offer. Despite the intentions of achieving this integration, it is not yet fully understood how this shifted view will affect the development processes of the physical artefact and the technological progress.
The vision of the Faste Laboratory is that func-tional products can be developed and offered to the market with a known risk, lower total cost, and less environmental impact, as well as include better cus-tomer value than traditional products. To achieve this, the centre will examine how physical artefacts and services may be designed and developed to become an element in a total offer, and enhance integrated product development to extend towards functional product development.
The focus on Functional Product Innovation is to build on the strong and innovative research in Functional Product Development, Simulation Driven Design and Distributed Collaborative Engineering. This will create the capability to identify, model and simulate offer components in the early phases of the development process, and support a closer collabora-tion between value-chain partners.
The Faste Laboratory Center for Functional Product Innovation
Realizing Functional Product Innovation.
2� 2�
Sirius 200�/0�
TOP ROw, FROM LEFT:
Peter Strandljung (VMCC), Anders Edwall (FSAE), Patrik Forsberg (FSAE) , Stefan Johansson (VAC), Johan Fällman (FSAE), Anders Olofsson (VAC), Mikael Nybacka (Advisor), Clas Persson (VAC), Johan Nilsson (FSAE), Joakim Wennström (FSAE), Gustav Sandberg (RvsP), Gustav Lundmark (VMCC), Martin Lund (FSAE)
THIRD ROw, FROM LEFT:
Per Wiklund (VMCC), Sverker Svärdby (RvsP), Peter Åström (Advisor), Petter Aspvik (VMCC), Henrik Nergård (Advisor), Anders Brattström (FSAE), Mikael Malmsköld (RvsP), Stefan Sandberg (Advisor), Per Mobacke (VMCC), Stefan Härdin (FSAE), Göran Månsson (FEE), Magnus Löfstrand (Advisor),Christian Johansson (Advisor)
SECOND ROw, FROM LEFT:
John Berggren (VAC), Marcus Persson (VAC), Andreas Wallgren (HDAB), Johan Olofsson (HDAB), Fredrik Persson (HDAB), Erik Mossing (Abbott), Maria Marklund (Abbott), Joakim Lundin (RvsP), Mikael Önnervall (RvsP), Fredrik Eriksson (VAC), Joakim Larsson (VAC), Lennart Karlsson (Professor).
BOTTOM ROw, FROM LEFT:
Magnus Andersson (VMCC), Johan Eriksson (HDAB), Mats Sundin (HDAB), Simon Forslund (FSAE), Anton Ljungberg (HDAB), Caroline Pettersson (VAC), Maria Hedin (Abbott), Anette Aava (FEE), Magnus Astrom (FEE), Johanna Vännström (RvsP), Petter Arlehed (VAC), Jari Leinonen (HDAB), Peter Berglund (FEE).
ABSENT:
Jimmy Westberg (RvsP), David Enbuske (HDAB), Elin Karlsson (Abbott)
Pho
to: A
teljé
Gro
dan
2� 2�
Industry PartnersVolvo Car CorporationVolvo is one of the car world’s strongest brand names. The company’s founders maintained from the outset that its operations should be based on care for the human being. That is why safety, quality and the environment are the core values that characterise Volvo car’s operations, cars and behaviour.
VOLVO VISION: To be the world’s mostdesired and successful premium car brand.
VOLVO MISSION: To create the safestmost exciting car experience for modernfamilies.
Quality is one of Volvo Car’s core values, and all quality efforts are aimed at ensuring satisfied customers. Becoming number one in customer satisfaction is one of the most important long-term goals. A Volvo car is among the safest cars in its class. It is also characterised by functional and attractive design, stable and well-balanced ride and roadholding, high comfort, practical features and powerful engines that are economical with fuel and meet strict environmental requirements.
Volvo Monitoring and Concept CentreIn 1986 Volvo Car Corporation took a significant, visionary step into its future by opening the Volvo Monitoring and Concept Center (VMCC) just west of Los Angeles, California.
VMCC develops, designs and tests a multitude of techniques and software on behalf of the Volvo Car organization, including applications such as 3-D virtual environment programs allowing dispersed teams of engineers and others to present and review projects and ideas together in real time. This can shorten lead times, offering major savings in an industry where it can take 2-5 years to produce a car from the drawing board.
Committing to a bigger purpose than just styling new cars, VMCC has evolved a unique multi-disciplinary working methodology and organization geared to create more value by forging a symbiotic relationship between design, business and technology.
Sources: http://www.volvocars-pr.comVolvo Car Corporation, 2006 Pocket Guide
2� 2�
Volvo AeroVolvo Aero develops and produces components for commercial aero, military aero and rocket engines with a high technology content, in cooperation with the world’s leading aerospace companies.
Service and maintenance represent an increasing proportion of operations in this area. Volvo Aero offers an extensive range of services, including maintenance, repair and overhaul of aero engines and industrial gas turbines, sales of spare parts for aero engines and aircraft as well as sales and leasing of complete engines and aircraft.
Sources: Volvo Aero Corporation
Hägglunds Drives ABMore than an ordinary drive supplier.
dustier. dirtier. Harsher. Heavier. The worse it is, the better equipped we are. After more than four decades of supplying drive systems for heavy industrial applications, Hägglunds is accustomed to difficult demands. We provide what you need to get the toughest jobs done right – no matter how harsh the environment or how specialised the task.
performance. Flexibility. Security.Hägglunds unique hydraulic drive systems – combined with our wealth of experience – provide advantages no other drive supplier can match. With Hägglunds drives on your equipment, you receive: • Maximum torque from zero speed. • High performance regardless of conditions. • Precise control of infinitely variable speed. • Standardised modules for design freedom. • Smaller, lighter, more effective installations. • Superior protection of equipment and processes.
Here. there. everywhere. A global leader in industrial drive solutions, Hägglunds has offices in nearly twenty countries and distribution partners in many more. We are where you are – with short lead times and fast, comprehensive service that answers your needs.
OUR DRIVE IS YOUR PERFORMANCE
Sources: Hägglunds Drives AB