final focus design
DESCRIPTION
Final Focus Design. Pantaleo Raimondi and Andrei Seryi SLAC Oct-5, 2000. Plan of the talk. Final Focus history Basic concepts of a “traditional” Final Focus Problems of a “traditional” approach Concepts of a new Final Focus Comparison of traditional and new FF - PowerPoint PPT PresentationTRANSCRIPT
NLC - The Next Linear Collider Project
Final Focus DesignFinal Focus Design
Pantaleo Raimondi and Andrei Seryi SLAC
Oct-5, 2000
NLC - The Next Linear Collider Project
P.Raimondi, A.Seryi
Plan of the talk
• Final Focus history
• Basic concepts of a “traditional” Final Focus
• Problems of a “traditional” approach
• Concepts of a new Final Focus
• Comparison of traditional and new FF
• Scaling to multi TeV region for the new FF
• Linear Collider Test Facility
• Conclusions
NLC - The Next Linear Collider Project
P.Raimondi, A.Seryi
Final Focus task
FF should focus the beams to small sizes at IP
• Chromaticity of FF is determined by the final doublet.
• FD chromaticity scales as L*/*, and thus the chromatic dilution of the beam size / ~ E L*/* is very large.
• Design of a FF is driven by the necessity of compensating the FD chromaticity.
NLC - The Next Linear Collider Project
P.Raimondi, A.Seryi
Concepts of a “traditional” Final Focus
0 200 400 600 800 1000 1200 1400 1600 18000
100
200
300
400
500
1 / 2
(
m1
/ 2 )
s (m)
-0.15
-0.10
-0.05
0.00
0.05
0.10
0.15
hy
hx
y
1/2
x
1/2
h (
m)
Optics of the traditional NLC FF. L* = 2m, x* =10mm and y* =0.12mm.
• Chromaticity is compensated in dedicated sections.
• Geometrical aberrations are canceled by using sextupoles in pairs with M= -I.
CCX CCY
FFTB and extrapolated NLC-FF design conceptually identical but...FFTB ~150m long!
NLCFF ~1750m long!
NLC - The Next Linear Collider Project
P.Raimondi, A.Seryi
SLC Final Focus
• SLC Final Focus had X & Y Interleaved Chromatic Correction Sections, to save in total length
• Bends Short to save in total length
• Background issues hardly considered
Resulting aberrations small for the design beam parameters, but the limiting factors for the achieved ones:
- Less Current- Smaller Emittances
Beta-Match Y CCS Y FT
Beta-Match X CCS X FT
S[ft]
S[ft]
NLC - The Next Linear Collider Project
P.Raimondi, A.Seryi
SLC Background
Extensive tracking identified large contribution to the background from high order aberrations in the “FD phase” generated in the CCS.
As an example of the better understanding, sextupoles were added to minimize
EdEdxxdT
''2
226
Luminosity greatly improved, since smaller IP ’s were allowed and detector Up-Time increased
NLC - The Next Linear Collider Project
P.Raimondi, A.Seryi
SLC-FF and SLC-FF achievements
FFTB Final Focus
BeamParameters
Design Achieved
x 4.2e-5mrad 5.5e-5mrad
y 4.2e-5mrad 1.0e-5mrad
x 1.65m 1.40m
y 1.65m 0.70m
BeamParameters
Design Achieved
x 3.0e-5mrad 2.8e-5mrad
y 0.3e-5mrad 0.1e-5mrad
x 1.00m 1.50m
y 0.060m 0.060m
X & Y spot sizes limited by background and aberrations
Jitter and background were some of the FFTB limitation
SLC Final Focus
* Most of the issues on tuning and understanding the FFS’s optic solved through the years of SLC and FFTB operations
NLC - The Next Linear Collider Project
P.Raimondi, A.Seryi
Problems of traditional FF
• Chromaticity is not locally compensated
• Bandwidth is limited since M = -I for off energy particles.
• High sensitivity to E in between the sources of chromaticity (due to wake-fields, synch.radiation).
• Bends have to be long and weak.
• Off-energy particles at IP and FD phases mix.
• Collimation in both FD and IP phases is necessary.
• System very long and scaling to higher energies is difficult.
/
NLC - The Next Linear Collider Project
P.Raimondi, A.Seryi
“Ideal” FF requirements
• Chromaticity corrected locally.• Number of bends minimized.• Dynamic aperture (preservation of the linear
optics) as large as possible.• System as simple as possible. • System optimized for flat beams.
NLC - The Next Linear Collider Project
P.Raimondi, A.Seryi
Principles of the “ideal” FF
• A Final Doublet is required to provide the necessary demagnification.• The chromaticity is cancelled locally by two sextupoles interleaved
with the FD together with a bend upstream to generate dispersion across them.
• Geometric aberrations of the FD sextupoles are cancelled by two more sextupoles placed in phase with them and upstream of the bend.
• Four more quadrupoles are needed for -matching
NLC - The Next Linear Collider Project
P.Raimondi, A.Seryi
Chromatic correction in FD
x + h
IP
quadsextup.
KS KF
Quad: )ηδδx(Kηδ)(xδ)(1
Kx' 2
FF
)2
ηδxδ(ηKηδ)(x
2
K x'
2
S2S Sextupole:
• Straightforward in Y plane
• a bit tricky in X plane:
Second order dispersion
chromaticity
If we require KSh= KF to cancel FD chromaticity, then half of the second order dispersion remains.
Solution: The -matching section produces as much X chromaticity as the FD, so the X sextupoles run twice stronger and cancel the second order dispersion as well.η
K2KKK
)2
ηδδx(K2x
δ)(1
Kηδ)(x
δ)(1
Kx'
FSFmatch-
2
Fmatch-F
NLC - The Next Linear Collider Project
P.Raimondi, A.Seryi
Second and higher order aberrations
• Second order aberrations produced by sextupoles are cancelled if
where all nonzero parameters are arbitrary
This requirements is less stringent than M=-I , so additional degrees
of freedom available for fine tuning of higher order aberrations.
• Higher order aberrations can be made to vanish for
our beam parameters.
NLC - The Next Linear Collider Project
P.Raimondi, A.Seryi
Third order aberrations
• Third order geometric aberrations generated by sextupoles:
where 12 and 34 are elements of transfer matrix between SF1 and SD1
• U1222 and U3444 typically negligibles
• U1244 and U3224 can be made to vanish
NLC - The Next Linear Collider Project
P.Raimondi, A.Seryi
Traditional and new FF
A new FF with the same
performance as NLC FF can be
~300m long, i.e. 6 times shorter
Traditional NLC FF, L* =2m
New NLC FF, L* =2m
new FF
NLC - The Next Linear Collider Project
P.Raimondi, A.Seryi
Extension of the “minimal optics” concept
• New FF has potentially much better performance than the traditional FF
• To use these capabilities and improve the system even further we incorporate:
• Twice L*– allows the use of large bore superconducting quadrupoles
– simplifies the design of the detector• One additional weak bend at the entrance enlarges bandwidth• One additional X-sextupole reduces horizontal aberrations• A decapole close to the first sextupole reduces 4th order chromatic
aberrations
• Soft bend downstream of the main bend reduces background
NLC - The Next Linear Collider Project
P.Raimondi, A.Seryi
Optics of the new FF
0 100 200 300 4000
100
200
300
400
500
1 / 2
(
m1
/ 2 )
s (m)
-0.06
-0.04
-0.02
0.00
0.02
0.04
0.06
0.08
0.10
0.12
0.14
hy
hx
y
1/2
x
1/2
h (
m)
Optics of the new NLC FF. L* =4.3m.
New FF with twice L* and with an additional bend and with soft bend.
Larger L* allows the use of large bore quadrupoles which decreases collimation requirements.
Larger L* also simplifies the design of the detector, and allows to make morerigid support of the FD.
NLC - The Next Linear Collider Project
P.Raimondi, A.Seryi
Chromaticity in traditional and new FF
Large chromaticity through the FF results
in high sensitivity to E along the way for
the traditional system
Traditional FFS, L* = 2m
New FFS, L* = 4.3m
Chromaticity is much smaller
through the new FF.
NLC - The Next Linear Collider Project
P.Raimondi, A.Seryi
IP bandwidth
-0.010 -0.005 0.000 0.005 0.0100.5
0.6
0.7
0.8
0.9
1.0
1.1
1.2
1.3
1.4
1.5
1.6 (
X /
0)1 / 2
(Y /
0)1 / 2
X /
0
Y /
0
L/L0
E/E, E
IP bandwidth of the traditional and new NLC FF. (/0)1/2 -- the beam size defined from beta function vs E/E
/0 -- luminosity equivalent beam size vs E/E L/L0 -- luminosity versus rms E
Traditional NLC FFL* =2m
New NLC FF, version ff00L* =4.3m
• The IP bandwidth is very similar for these systems.
NLC - The Next Linear Collider Project
P.Raimondi, A.Seryi
FD bandwidth
-0.10 -0.05 0.00 0.05 0.100
1
2
3
4
5
6
7
8
9
10
11
12 ( / 0) 1/ 2
Traditional FF, X Traditional FF, Y New FF, X New FF, Y
E/E
FD bandwidth of the Traditional and New NLC FF. Normalized betatron functions at the final doublet versus energy offset E/E.
• The FD bandwidth is rarely discussed but very important
• Large FD bandwidth is necessary to minimize background due to off energy particles
• New FF has much larger FD bandwidth
NLC - The Next Linear Collider Project
P.Raimondi, A.Seryi
Collimation and background
-100 -80 -60 -40 -20 0 20 40 60 80 100-100
-80
-60
-40
-20
0
20
40
60
80
100
Traditional FF New FF
Y (
mm
)
X (mm)
Halo beam at the FD entrance. Incoming beam has 100 times larger coordinates in IP phase than in FD phase.
Particles of incoming beam are placed on a surface of an ellipsoid with dimensions N (x,x',y,y',E) = (800,8,4000,40,20) times larger than nominal beam
parameters.
• Traditional FF does not preserve betatron phase of halo particles
• New FF dos not mix IP and FD phase particles
Incoming beam halo
Beam at FD
Traditional FF
New FF
=> Both IP and FD phase collimation required for traditional FF
=> Collimation design may benefit from the phase conservation feature of the new FF
NLC - The Next Linear Collider Project
P.Raimondi, A.Seryi
Tuning and tolerances
• Tuning is very similar for the new and traditional FF– by moving sextupoles the IP dispersion, waist, coupling can be
adjusted
• Positions tolerances are very similar Global measure of the FF tolerances:
rms beam offset at the IP comes from
vibration of optical elements
produced by fast ground motion
NLC - The Next Linear Collider Project
P.Raimondi, A.Seryi
IP beam offsets sensitivity to quad motion
NLC-FF: IP OFFSET FORA GIVEN QUAD OFFSETBLACK BARS: X WHITE BARS: Y
NEW-FF: IP OFFSET FORA GIVEN QUAD OFFSETBLACK BARS: X WHITE BARS: Y
NLC - The Next Linear Collider Project
P.Raimondi, A.Seryi
Scaling with emittance
0.01 0.1 1 100.7
0.8
0.9
1.0
B0
2B0
0.5B0
L/L
0
/ 0
Luminosity vs emittance for the new FF for the nominal, twice larger and twice lower field in the bends. Tracking without synchrotron radiation.
• Increasing will increase contribution of
aberrations to *
• To keep the contribution of aberrations constant, the bend field must scale as
B0 ~ 1/2
• This scaling is natural since
h’/*
is then also constant
NLC - The Next Linear Collider Project
P.Raimondi, A.Seryi
Energy range
0.01 0.1 1 100.2
0.3
0.4
0.5
0.6
0.7
0.8
0.9
1.0
0.5B0
0.7B0
B0
1.4B0
2B0
B0
1000 GeV
250 GeV
500 GeV, B0
L/L
0
/ 0
Luminosity vs emittance for different bend field and beam energyNew FF, ver.ff00.Tracking with sync.rad.
A fixed length FF can operate
in a a wide range of energies.
• Scaling to lower energies is easy. Rescaling of bends may be required.
• SR contribution increase for high energies, but this growth is slowed by
B0 ~ 1/2 ~ 1/1/2 bend rescaling.
NLC - The Next Linear Collider Project
P.Raimondi, A.Seryi
Scaling with energy
• Length of traditional FF scales faster than linear with energy• For a 5 TeV CM, the length of traditional FF would be
comparable to the length of the linac.
• With the new FF scheme, a 5 TeV CM FF could be only about 700m.
New FF Length 7/10
NLC - The Next Linear Collider Project
P.Raimondi, A.Seryi
Scaling with energy
NLC - The Next Linear Collider Project
P.Raimondi, A.Seryi
5.0 Tev/CM FF
Luminosity L/L0 versus beam energy. Beta functions at IP fixed. Angular dispersion at IP reoptimized at each energy .
1500 1750 2000 2250 2500
0.7
0.8
0.9
1.0
Beam radiation ON
Beam radiation OFF
Lum
inos
ity L
/L0
Beam energy, GeV
A FF for 3 - 5TeV CM collidercan be just about 500 m long!
NLC - The Next Linear Collider Project
P.Raimondi, A.Seryi
New FF benefits
• New FF is much shorter, providing a significant cost reduction for the collider.
• New FF has similar bandwidth and several orders of magnitudes larger dynamic aperture than the traditional FF.
• Background is an issue in the new design. Thanks to the expected benefits the collimation section may be relaxed with the new FF.
• L* = 4.3m for the new FF simplifies engineering of the IP area, and probably helps the stabilization of the final doublet.
• Scaling to multi-TeV region is extremely attractive for the new FF.
• Further improvements of the system are under study…
(and seem possible)
NLC - The Next Linear Collider Project
P.Raimondi, A.Seryi
LCTF hypotesis
It is conceivable to utilize the existing hardware at SLAC to realize a “Linear Collider Test Facility”
• Test bench for various NLC applicable ideas and techniques• Logical and useful addition to NLCTA, Orion, ATF…• LCTF is an Interaction Region oriented test facility• Keep LCTF running until NLC is commissioned to maintain
“beam handling state of the art” and train new people • LCTF can start with:
– Test the New Final Focus scheme – Collide beams with NLC beta functions and bunch length,
and ~ 70 nm vertical spot sizes – Develop and test IR vibration counteraction in vivo– Feed forward jitter suppression– Nano-meter level beam stabilization at the IP – …and much more
NLC - The Next Linear Collider Project
P.Raimondi, A.Seryi
Basic Premises
• e+ and e- beams are almost always available at the end of the Linac @ 30Hz and N~2.5e10, with good emittances
• LCTF operation should not be in conflict with PEP-II operation
• Refurbishing of Arcs and FF existing hardware reasonably affordable
• The FF modifications, which mainly require a new FD, is affordable even by SLAC alone, but
• LCTF will attract other labs and a solid international collaboration between all the labs involved in linear collider R&D could be established, to share efforts and costs.
NLC - The Next Linear Collider Project
P.Raimondi, A.Seryi
Upgrades list
• Damping Rings UpgradeRearrange the QFs and power feeds and add Booster Power Supplies. We expect to decrease both horizontal and equilibrium vertical emittances by about a factor 3: x=1e-5m*rad y=0.05e-5m*rad
• Rings to Linac UpgradeA more suitable bunch compressor with better compression and less emittance growth should be studied and implemented.
• Final Focus UpgradeThe Final Focus should be modified according to the new Final Focus scheme. We expect to have very small residual spot size dilutions down to NLC-like IP beta functions.
Desired
NLC - The Next Linear Collider Project
P.Raimondi, A.Seryi
LCTF parameters
• Beam Energy: 30 GeV
• DR emittances: x,y=1.0/0.05E-5m
• FF emittances: x,y=1.6/0.16E-5m
• IP Betas: x=2mm y=0.2mm
• Bunch length: z=0.8 - 0.2mm
• IP spot sizes: x,y=750/75nm
• Beam currents: N= 1.0e10
• Based on conservative extension of the achieved SLC parameters
• Work at 30GeV@10Hz to reduce synch.rad in arcs, FF, and to reduce electricity bill (e.g. for arcs: ~ 1MW @45.6GeV per arc)
• Work with lower current to improve beam stability
LCTFparameters
Emittances routinely achieved at SLC @45.6GeV and N= 1.5e10 : – Damping ring: x,y=2.9/0.15E-5m
– Final focus: x,y=4.0/0.30E-5m (synch.rad. Arc contribution: x,y=1.1/0.15E-5m)
NLC - The Next Linear Collider Project
P.Raimondi, A.Seryi
LCTF Final Focus optics
• Required modifications:– final doublet
– make bend B2 longer (to reduce sync.rad. effect in horiz. beam size)
Very preliminary solution
LCTF final focus with x,y=2/0.2mm, L*=1.5m
• Use existing SLC FF• Make MIN modifications
New final doublet
NLC - The Next Linear Collider Project
P.Raimondi, A.Seryi
LCTF Final Focus optics
• Chromo-geometrical aberrations:– acceptable
x,y=versus energy offset
• Tracking: OK in Y (~70nm)
• x1.6 in X due to sync.rad. in B2 at 30GeV (worse at 46GeV)
– by making B2 longer this effect can be almost eliminated
– further optimization of the optics is possible
NLC - The Next Linear Collider Project
P.Raimondi, A.Seryi
Final doublet
• Final doublet options:– superconductive: modify existing SC triplet, or build from scratch
– electromagnets
– permanent magnet quads
• The permanent magnet options is most reasonable, because– not as expensive as SC (FF Cryo plant gone…)
– allows to test solutions relevant for NLC
• Variety of options of FD stabilization– active vibration suppression with reference to ground and inertial frame
– feedforward correction of magnetic center position by dipole coils
– etc.
NLC - The Next Linear Collider Project
P.Raimondi, A.Seryi
Bunch compression in Arcs
P.Emma
NLC - The Next Linear Collider Project
P.Raimondi, A.Seryi
LCTF vibration issues
• Quad stability in the FF tunnels is OK or almost OK for LCTF
• Can deliberately make situation worse and learn to correct
Vibrations of 54Q10quad on FN20 girder
In LCTF FF the tolerance for this quad jitter is a fraction of that for the final quads.
NLC - The Next Linear Collider Project
P.Raimondi, A.Seryi
LCTF vibration issues• Vibration stability in the
SLD detector is not sufficient
• Need to improve quad center stability by about 10 times
• Feedforward counteraction methods should be developed
• Learning how to do this is one of the major goals of LCTF
Examples of data from SLD vibration studies
• Frequencies unreachable for beam-based feedback: f > rep.rate/20• Linear Collider with 30Hz rep.rate and * ~ 70nm will give experience applicable to LC with 120Hz and * ~ 3nm
NLC - The Next Linear Collider Project
P.Raimondi, A.Seryi
What else can be tested @ LCTF?
• Tests of fast feedforward
• Tests of traveling focus (allows to play with y/z)
Position of focus is moving during collision [Balakin 91]
NLC - The Next Linear Collider Project
P.Raimondi, A.Seryi
More topics to be studied
• IP jitter from quad vibrations
• Linac to IP beam jitter feed forward
• Structures on movers (X-band?) for emittance optimization
• Global Linac Orbit control and stabilization
• IP pair production
• New schemes of Background reduction (e.g.Octupoles)
• New diagnostic (e.g. OTRs)
• and much more (any idea is welcome) ...
NLC - The Next Linear Collider Project
P.Raimondi, A.Seryi
Conclusion
• Final Focus System is a crucial point in the linear collider designs
• Thanks to years of experience on SLC-FF and FFTB, we have been able to focus what are its main limitations and problems, and design a “Next Generation FFS”.
• The present scheme allows for a collider that could be “adiabatically” upgraded in energy through the years up to 5TeV/CM, if the physics community requires it.
• More could be gained with moderate money investment. An “LCTF” International Collaboration could better focus all the efforts toward a unique and more optimal Beam Delivery System design.