fi01 2011 kap10 en - siemens · pdf fileappendix training 10/2 siemens fi 01 · 2011 us...
TRANSCRIPT
Siemens FI 01 · 2011 US Edition
1010/2 Training
10/4 Partner at Industry Automation and Drive Technologies
10/5 Online ServicesInformation and Ordering in the Internet and on DVD
10/6 Service & SupportThe unmatched complete service for the entire life cycle
10/9 Pressure Equipment Directive (97/23/EC)
10/12 Software Licenses
10/13 Subject Index
10/16 Order No. Index
10/26 Notes
10/28 Conditions of sale and delivery, Export regulations
Appendix
FI01_2011_Kap10_en.book Seite 1 Mittwoch, 2. Februar 2011 6:16 18
© Siemens AG 2011
AppendixTraining
10/2 Siemens FI 01 · 2011 US Edition
10
■ Faster and more applicable know-how: Hands-on training from the manufacturer
SITRAIN® – the Siemens Training for Automation and Industrial Solutions – provides you with comprehensive support in solving your tasks.
Training by the market leader in automation and plant engineer-ing enables you to make independent decisions with confi-dence. Especially where the optimum and efficient use of prod-ucts and plants are concerned. You can eliminate deficiencies in existing plants, and exclude expensive faulty planning right from the beginning.
First-class know-how directly pays for itself: In shorter startup times, high-quality end products, faster troubleshooting and re-duced downtimes. In other words, increased profits and lower costs.
Achieve more with SITRAIN• Shorter times for startup, maintenance and servicing• Optimized production operations• Reliable configuration and startup• Minimization of plant downtimes• Flexible plant adaptation to market requirements• Compliance with quality standards in production• Increased employee satisfaction and motivation• Shorter familiarization times following changes in technology
and staff
■ Contact
Visit our site on the Internet at:
http://www.usa.siemens.com/sitrain
or let us advise you personally.
SITRAIN Customer Support USA:
Phone: +1-800-241-4453+1-423-262-5711
Fax: +1-678-297-8316
E-Mail: [email protected]
■ SITRAIN highlights
Top trainers
Our trainers are skilled teachers with direct practical experience. Course developers have close contact with product develop-ment, and directly pass on their knowledge to the trainers.
Practical experience
The practical experience of our trainers enables them to teach theory effectively. But since theory can be pretty drab, we attach great importance to practical exercises which can comprise up to half of of the course time. You can therefore immediately im-plement your new knowledge in practice. We train you on state-of-the-art methodically/didactically designed training equip-ment. This training approach will give you all the confidence you need.
Wide variety
With a total of about 300 local attendance courses, we train the complete range of Siemens Industry products as well as interac-tion of the products in systems.
Tailor-made training
We are only a short distance away. You can find us at more than 50 locations in Germany, and in 62 countries worldwide. You wish to have individual training instead of one of our 300 courses? Our solution: We will provide a program tailored exactly to your personal requirements. Training can be carried out in our Training Centers or at your company.
The right mixture: Blended learning
"Blended learning" means a combination of various training me-dia and sequences. For example, a local attendance course in a Training Center can be optimally supplemented by a teach-yourself program as preparation or follow-up. Additional effect: Reduced traveling costs and periods of absence.
FI01_2011_Kap10_en.book Seite 2 Mittwoch, 2. Februar 2011 6:16 18
© Siemens AG 2011
AppendixTraining
10/3Siemens FI 01 · 2011 US Edition
10
■ Course offer for Processinstrumentation
Commissioning engineers, configurators
Programmers Service personnel
Project managers, members of project teams Operators, users
Decision-makers, sales personnel Maintenance personnel
Title Target group Duration/Medium
Course code
WirelessHART Basic Training 2 days SC-PS-WHB
Advanced Training PS1 Pressure, Temperature and Positioner 4 days SC-PS1-ADV
2 days Training Pressure and Temperature ✔ ✔ ✔ ✔ ✔ 2 days SC-PS1-PT
2 days Training Positioner ✔ ✔ ✔ ✔ ✔ 2 days SC-PS1-SIP
Pressure, Temperature Measurement and Electropneumatic Positioners - Technology and Sales
✔ ✔ ✔ ✔ ✔ 4,5 days SC-PS1-T1S
Level Measurement - Technology and Sales ✔ ✔ ✔ ✔ ✔ 4,5 days SC-PS2-T1S
Milltronics Weighing - Basics ✔ ✔ ✔ 4 days SC-PS2-WT
SITRANS FUS Clamp-on training 3 days SC-PS3-C
Flow Mesurement - Technology and Sales ✔ 5 days SC-PS3-T1S
Advanced Service Training in Flow Meters ✔ ✔ 5 days SC-PSA-3
Siwarex Basic Training ✔ ✔ ✔ ✔ ✔ 3 days SC-SWXBAS
Advanced Siwarex FTA Training ✔ ✔ ✔ 1,5 days SC-SWXFTAA
Advanced Siwarex FTC Training for beltscales ✔ ✔ ✔ 1 day SC-SWXFTAB
Advanced Siwarex FTC Training for Loss-in-weight systems ✔ ✔ ✔ 1 day SC-SWXFTAL
PROFIBUS, HART and SIMATIC PDM in Process Automation - Technology and Sales
✔ ✔ ✔ ✔ ✔ 2,5 days SC-TP-T1S
Process Measurement Basics ✔ 2 days SC-TP2-T1S
FI01_2011_Kap10_en.book Seite 3 Mittwoch, 2. Februar 2011 6:16 18
© Siemens AG 2011
AppendixPartner at Industry Automation and Drive Technologies
10/4 Siemens FI 01 · 2011 US Edition
10
At Siemens Industry Automation and Drive Technologies, more than 85 000 people are resolutely pursuing the same goal: long-term improvement of your competitive ability. We are committed to this goal. Thanks to our commitment, we continue to set new standards in automation and drive technology. In all industries – worldwide.
At your service locally, around the globe for consulting, sales, training, service, support, spare parts ... on the entire Industry Automation and Drive Technologies range.
Your personal contact can be found in our Contacts Database at:www.siemens.com/automation/partner
You start by selecting a• Product group, • Country, • City, • Service.
FI01_2011_Kap10_en.book Seite 4 Mittwoch, 2. Februar 2011 6:16 18
© Siemens AG 2011
AppendixOnline Services
Information and Orderingin the Internet and on DVD
10/5Siemens FI 01 · 2011 US Edition
10
■ Siemens Industry Automation and Drive Technologies in the WWW
A detailed knowledge of the range of products and services available is essential when planning and configuring automation systems. It goes without saying that this information must always be fully up-to-date.
Siemens Industry Automation and Drive Technologies has therefore built up a comprehensive range of information in the World Wide Web, which offers quick and easy access to all data required.
Under the address
www.siemens.com/industry
you will find everything you need to know about products, sys-tems and services.
■ Product Selection Using the Offline Mall of Industry
Detailed information together with convenient interactive functions: The Offline Mall CA 01 covers more than 80 000 products and thus provides a full summary of the Siemens Industry Automation and Drive Technologies product base.
Here you will find everything that you need to solve tasks in the fields of automation, switchgear, installation and drives. All information is linked into a user interface which is easy to work with and intuitive.
After selecting the product of your choice you can order at the press of a button, by fax or by online link.
Information on the Offline Mall CA 01 can be found in the Internet under
www.siemens.com/automation/ca01
or on DVD.
■ Easy Shopping with the Industry Mall
The Industry Mall is the virtual department store of Siemens AG in the Internet. Here you have access to a huge range of prod-ucts presented in electronic catalogs in an informative and at-tractive way.
Data transfer via EDIFACT allows the whole procedure from selection through ordering to tracking of the order to be carried out online via the Internet.
Numerous functions are available to support you.
For example, powerful search functions make it easy to find the required products, which can be immediately checked for avail-ability. Customer-specific discounts and preparation of quotes can be carried out online as well as order tracking and tracing.
Please visit the Industry Mall on the Internet under:
www.siemens.com/industrymall
FI01_2011_Kap10_en.book Seite 5 Mittwoch, 2. Februar 2011 6:16 18
© Siemens AG 2011
AppendixService & SupportThe unmatched complete service for the entire life cycle
10/6 Siemens FI 01 · 2011 US Edition
10
For machine constructors, solution providers and plant opera-tors: The service offering from Siemens Industry, Automation and Drive Technologies includes comprehensive services for a wide range of different users in all sectors of the manufacturing and process industry
To accompany our products and systems, we offer integrated and structured services that provide valuable support in every phase of the life cycle of your machine or plant - from planning and implementation through commissioning as far as mainte-nance and modernization.
Our Service & Support accompanies you worldwide in all mat-ters concerning automation and drives from Siemens. We pro-vide direct on-site support in more than 100 countries through all phases of the life cycle of your machines and plants.
You have an experienced team of specialists at your side to pro-vide active support and bundled know-how. Regular training courses and intensive contact among our employees - even across continents - ensure reliable service in the most diverse areas.
■ Online SupportThe comprehensive online infor-mation platform supports you in all aspects of our Service & Sup-port at any time and from any lo-cation in the world.
www.siemens.com/automation/service&support
■ Technical SupportExpert advice on technical questions with a wide range of demand-optimized services for all our products and systems.
www.siemens.com/automation/support-request
■ Technical ConsultingSupport in planning and design-ing your project: From detailed actual-state analysis, definition of the goal and consulting on product and system questions right through to the creation of the automation solution.
■ TrainingExtend your competitive edge - through practical know-how directly from the manufacturer.
www.siemens.com/sitrain
Contact information is available in the Internet at: www.siemens.com/automation/partner
FI01_2011_Kap10_en.book Seite 6 Mittwoch, 2. Februar 2011 6:16 18
© Siemens AG 2011
AppendixService & Support
The unmatched complete servicefor the entire life cycle
10/7Siemens FI 01 · 2011 US Edition
10
■ Engineering SupportSupport during project engi-neering and development with services fine-tuned to your re-quirements, from configuration through to implementation of an automation project.
■ Field ServiceOur Field Service offers you ser-vices for commissioning and maintenance - to ensure that your machines and plants are always available.
■ Spare partsIn every sector worldwide, plants and systems are required to operate with constantly in-creasing reliability. We will pro-vide you with the support you need to prevent a standstill from occurring in the first place: with a worldwide network and opti-mum logistics chains.
■ RepairsDowntimes cause problems in the plant as well as unnecessary costs. We can help you to re-duce both to a minimum - with our worldwide repair facilities.
■ OptimizationDuring the service life of ma-chines and plants, there is often a great potential for increasing productivity or reducing costs. To help you achieve this poten-tial, we are offering a complete range of optimization services.
■ ModernizationYou can also rely on our support when it comes to modernization - with comprehensive services from the planning phase all the way to commissioning.
■ Service programsOur service programs are se-lected service packages for an automation and drives system or product group. The individual services are coordinated with each over to ensure smooth coverage of the entire life cycle and support optimum use of your products and systems.
The services of a Service Pro-gram can be flexibly adapted at any time and used separately.
Examples of service programs:7 Service contracts7 Plant IT Security Services7 Life Cycle Services for Drive Engineering7 SIMATIC PCS 7 Life Cycle Services7 SINUMERIK Manufacturing Excellence7 SIMATIC Remote Support Servicess
Advantages at a glance:7 Reduced downtimes for increased productivity7 Optimized maintenance costs due to a tailored scope of ser-
vices7 Costs that can be calculated and therefore planned7 Service reliability due to guaranteed response times and
spare part delivery times7 Customer service personnel will be supported and relieved of
additional tasks7 Comprehensive service from a single source, fewer interfaces
and greater expertise
Contact information is available in the Internet at: www.siemens.com/automation/partner
FI01_2011_Kap10_en.book Seite 7 Mittwoch, 2. Februar 2011 6:16 18
© Siemens AG 2011
AppendixService & Support
10/8 Siemens FI 01 · 2011 US Edition
10
■ Knowledge Base on DVD
For locations without online con-nections to the Internet there are excerpts of the free part of the information sources available on DVD (Service & Support Knowl-edge Base). This DVD contains all the latest product information at the time of production (FAQs, Downloads, Tips and Tricks, Up-dates) as well as general infor-mation on Service & Support.
The DVD also includes a full-text search and our Knowledge Manager for targeted searches for solutions. The DVD will be up-dated every 4 months.
Just the same as our online offer in the Internet, the Service & Support Knowledge Base on DVD comes complete in 5 lan-guages (German, English, French, Italian, Spanish).
You can order the Service & Support Knowledge Base DVD from your Siemens contact.
Order no. 6ZB5310-0EP30-0BA2
■ Automation Value Card
Small card - great support
The Automation Value Card is an integral component of the com-prehensive service concept with which Siemens Automation and Drives will accompany you in each phase of your automation project.
It doesn't matter whether you want just specific services from our Technical Support or want to purchase something on our Online portal, you can always pay with your Automation Value Card. No invoicing, transparent and safe. With your personal card number and associated PIN you can view the state of your account and all transactions at any time.
Services on card. This is how it's done.
Card number and PIN are on the back of the Automation Value Card. When delivered, the PIN is covered by a scratch field, guaranteeing that the full credit is on the card.
By entering the card number and PIN you have full access to the Service & Support services being offered. The charge for the services procured is debited from the credits on your Automa-tion Value Card.
All the services offered are marked in currency-neutral credits, so you can use the Automation Value Card worldwide.
Order your Automation and Value Card easily and comfortably like a product with your sales contact.
Detailed information on the services offered is available on our Internet site at:
www.siemens.com/automation/service&support
Service & Support à la Card: Examples
Automation Value Card order numbers
Credits Order no.
200 6ES7 997-0BA00-0XA0
500 6ES7 997-0BB00-0XA0
1 000 6ES7 997-0BC00-0XA0
10 000 6ES7 997-0BG00-0XA0
Technical Support
”Priority“ Priority processing for urgent cases
”24 h“ Availability round the clock
”Extended“ Technical consulting for complex questions
”Mature Products“
Consulting service for products that are not available any more
Support Tools in the Support Shop
Tools that can be used directly for configuration, anal-ysis and testing
FI01_2011_Kap10_en.book Seite 8 Mittwoch, 2. Februar 2011 6:16 18
© Siemens AG 2011
AppendixPressure Equipment Directive (97/23/EC)
10/9Siemens FI 01 · 2011 US Edition
10
■ General
The pressure equipment directive 97/23/EC applies to the align-ment of the statutory orders of the European member states for pressure equipment. Such equipment in the sense of the direc-tive includes vessels, pipelines and accessories with a maxi-mum permissible pressure of more than 0.5 bar above atmo-spheric.The pressure equipment directive can be used starting Novem-ber 29, 1999, and is compulsory starting May 29, 2002.
■ Division according to the danger potentialEquipment is divided in line with the pressure equipment direc-tive according to the danger potential (medium/pressure/vol-ume/nominal diameter) into the categories I to IV or Article 3 Paragraph 3.The following criteria are decisive for assessment of the danger potential, and are also shown in Diagrams 1 to 4 and 6 to 9:
Fuelled pressure equipment or equipment heated in another manner are shown separately in Diagram 5.
Note:Liquids according to Article 3 are those liquids whose steam pressure is not more than 0.5 bar above standard atmospheric pressure (1013 mbar) at the maximum permissible temperature.
■ Division of media (liquid/gaseous) into the fluid groups
Fluids are divided according to Article 9 into the following fluid groups:
■ Conformity rating
Pressure equipment of categories I to IV must comply with the safety requirements of the directive and be assigned the CE symbol.
They must comply with a conformity rating procedure according to Appendix III of the directive.
Pressure equipment according to Article 3 Paragraph 3 must be designed and manufactured in agreement with the sound engi-neering practice SEP applying in a member country, and must not be assigned a CE symbol (CE symbols from other directives are not affected).
Siemens has carried out a conformity rating, assigned a CE sym-bol, and issued a declaration of conformity for its products (pro-viding the equipment is not within the context of Article 3 Paragraph 3).
Supervision of the design, dimensioning, testing and manufac-ture is carried out according to module H (comprehensive qual-ity assurance).
Notes:• Equipment designed for media with a high danger potential
(e.g. gases of fluid group 1) may also be used for media with a lower danger potential (e.g. gases of fluid group 2, or liquids of fluid groups 1 and 2).
• The pressure equipment directive according to Article 1 Para-graph 1 does not apply to equipment such as e.g. mobile off-shore plants, ships, aircraft, water supply and waste water net-works, nuclear plants, rockets and pipelines outside industrial plants.
• Fluid group Group 1 or 2
• Aggregate state Liquid or gaseous
• Type of pressurized equipment- Vessel
- Pipeline
Product of pressure and volume (PS * V [barL])Nominal diameter, pressure or product of pressure and nominal diameter (PS * DN)
The maximum permissible temperature for the used liquids is the maximum process temperature which can occur, as defined by the user. This must be within the limits defined for the equipment.
Group 1
PotentiallyexplosiveR phrases: e.g.: 2, 3 (1, 4, 5, 6, 9, 16, 18, 19, 44)
Highly toxic R phrases: e.g.: 26, 27, 28, 39 (32)
HighlyflammableR phrases: e.g.: 12 (17)
ToxicR phrases: e.g.: 23, 24, 25 (29, 31)
Readilyflammable R phrases: e.g.: 11, 15, 17 (10, 30)
Fire stimulatingR phrases: e.g.: 7, 8, 9 (14, 15, 19)
Flammable if the maximum permissible temperature is above the flash point.
Group 2
All fluids not belonging to Group 1.Also applies to fluids which are e.g. dangerous to the environment, cor-rosive, dangerous to health, irritant or carcinogenic (if not highly toxic).
FI01_2011_Kap10_en.book Seite 9 Mittwoch, 2. Februar 2011 6:16 18
© Siemens AG 2011
AppendixPressure Equipment Directive (97/23/EC)
10/10 Siemens FI 01 · 2011 US Edition
10
■ Diagrams
• Gases of fluid group 1• Vessels according to Article 3 Number 1.1 Letter a) First dash• Exception: unstable gases belonging to Categories I and II
must be included in Category III.
• Gases of fluid group 2• Vessels according to Article 3 Number 1.1 Letter a) Second
dash• Exception: fire extinguishers and bottles for breathing appara-
tus: at least Category III.
• Liquids of fluid group 1• Vessels according to Article 3 Number 1.1 Letter b) First dash
• Liquids of fluid group 2• Vessels according to Article 3 Number 1.1 Letter b) Second
dash• Exception: modules for producing warm water
• Fuelled pressure equipment or equipment heated in another manner above 110 °C and liable to overheating.
• Vessel according to Article 3 Number 1.2• Exception: pressure cooker, test procedure at least according
to Category III.
I II III IV
Diagram 1
Article 3Paragraph 3
0,1 1 10 100 1000 1000050
V [l]
PS = 0,5
400 2000
1
10
100
1000
0,5
PS [bar]10000
200
2550
PS = 200
PS = 1000
PS · V = 1000
PS · V = 200
PS · V = 50
PS · V = 25
V =
1
I II III
IV
III
IV
Diagram 2
Article 3Paragraph 3
0,1 1 10 100 1000 10000 V [l]
PS = 0,5
400 2000
1
10
100
1000
3000
0,5
PS [bar]10000
200
50
PS = 1000
PS · V = 1000
PS · V = 200
PS · V = 50 PS = 4
PS · V = 3000
PS = 3000
V =
1
I
II
IIIIIDiagram 3
Article 3Paragraph 3
0,1 1 10 100 1000 1000050
V [l]
PS = 0,5
PS = 500
PS = 10
400 2000
1
10
100
1000
0,5
PS [bar]10000
200
2550
PS · V = 200
V =
1
I II
I
Diagram 4
Article 3Paragraph 3
0,1 1 10 100 1000 1000050
V [l]
PS = 0,5
PS = 10
PS = 500
400 2000
1
10
100
1000
0,5
PS [bar]10000
200
2550
PS = 1000
PS · V = 10000
V =
10
I II III
IV
Diagram 5
Article 3Para-graph 3
0,1 1 10 100 1000 100002
V [l]
PS = 0,5
400
1
10
100
1000
0,5
PS [bar]10000
32PS = 32
PS · V = 3000
PS · V = 200
PS · V = 50
V =
2
V =
100
0
FI01_2011_Kap10_en.book Seite 10 Mittwoch, 2. Februar 2011 6:16 18
© Siemens AG 2011
AppendixPressure Equipment Directive (97/23/EC)
10/11Siemens FI 01 · 2011 US Edition
10
• Gases of fluid group 1• Pipelines according to Article 3 Number 1.3 Letter a) First dash• Exception: unstable gases belonging to Categories I and II
must be included in Category III.
• Gases of fluid group 2• Pipelines according to Article 3 Number 1.3 Letter a) Second
dash• Exception: liquids at temperatures > 350 °C belonging to Cat-
egory II must be included in Category III.
• Liquids of fluid group 1• Pipelines according to Article 3 Number 1.3 Letter b) First dash
• Liquids of fluid group 2• Pipelines according to Article 3 Number 1.3 Letter b) Second
dash
I
II III
Article 3Paragraph 3
0,1 1 10 100 1000 1000025 DN
PS = 0,5
350
1
10
100
1000
0,5
PS [bar]
DN
= 2
5
DN
= 1
00D
N =
100
DN
= 3
50
PS · DN=3500
PS · DN=1000
I II III
Article 3Paragraph 3
0,1 1 10 100 1000 1000032
DN
PS = 0,5
250 2000
1
10
100
1000
0,5
PS [bar]
DN
= 3
2
DN
= 1
00
DN
= 2
50
PS · DN = 5000
PS · DN = 1000
PS · DN = 3500
7000
I
II
III
Article 3Paragraph 3
0,1 1 10 100 1000 1000025
DN
PS = 0,5
PS = 10
PS = 500
4000
1
10
100
1000
0,5
PS [bar]
DN
= 2
5
PS · DN = 2000500
I
II
Article 3Paragraph 3
0,1 1 10 100 1000 10000 DN
PS = 0,5
PS = 10
PS = 500
200
1
10
100
1000
0,5
PS [bar]
DN
= 2
00
PS · DN =5000
500
FI01_2011_Kap10_en.book Seite 11 Mittwoch, 2. Februar 2011 6:16 18
© Siemens AG 2011
AppendixSoftware Licenses
10/12 Siemens FI 01 · 2011 US Edition
10
■ Overview
Software typesSoftware requiring a license is categorized into types.The following software types have been defined:• Engineering software• Runtime software
Engineering softwareThis includes all software products for creating (engineering) user software, e.g. for configuring, programming, parameteriz-ing, testing, commissioning or servicing. Data generated with engineering software and executable programs can be duplicated for your own use or for use by third-parties free-of-charge.
Runtime softwareThis includes all software products required for plant/machine operation, e.g. operating system, basic system, system expan-sions, drivers, etc.The duplication of the runtime software and executable pro-grams created with the runtime software for your own use or for use by third-parties is subject to a charge. You can find information about license fees according to use in the ordering data (e.g. in the catalog). Examples of categories of use include per CPU, per installation, per channel, per instance, per axis, per control loop, per variable, etc.Information about extended rights of use for parameteriza-tion/configuration tools supplied as integral components of the scope of delivery can be found in the readme file supplied with the relevant product(s).
License typesSiemens Industry Automation & Drive Technologies offers vari-ous types of software license:• Floating license• Single license• Rental license• Trial license
Floating licenseThe software may be installed for internal use on any number of devices by the licensee. Only the concurrent user is licensed. The concurrent user is the person using the program. Use begins when the software is started. A license is required for each concurrent user.
Single licenseUnlike the floating license, a single license permits only one installation of the software. The type of use licensed is specified in the ordering data and in the Certificate of License (CoL). Types of use include for example per device, per axis, per channel, etc. One single license is required for each type of use defined.
Rental licenseA rental license supports the "sporadic use" of engineering software. Once the license key has been installed, the software can be used for a specific number of hours (the operating hours do not have to be consecutive). One license is required for each installation of the software.
Trial licenseA trial license supports "short-term use" of the software in a non-productive context, e.g. for testing and evaluation purposes. It can be transferred to another license.
Factory licenseWith the Factory License the user has the right to install and use the software at one permanent establishment only. The perma-nent establishment is defined by one address only.The number of hardware devices on which the software may be installed results from the order data or the Certificate of License (CoL).
Certificate of licenseThe Certificate of License (CoL) is the licensee's proof that the use of the software has been licensed by Siemens. A CoL is required for every type of use and must be kept in a safe place.
DowngradingThe licensee is permitted to use the software or an earlier ver-sion/release of the software, provided that the licensee owns such a version/release and its use is technically feasible.
Delivery versionsSoftware is constantly being updated.The following delivery versions• PowerPack• Upgradecan be used to access updates.Existing bug fixes are supplied with the ServicePack version.
PowerPackPowerPacks can be used to upgrade to more powerful software.The licensee receives a new license agreement and CoL (Certificate of License) with the PowerPack. This CoL, together with the CoL for the original product, proves that the new soft-ware is licensed. A separate PowerPack must be purchased for each original license of the software to be replaced.
UpgradeAn upgrade permits the use of a new version of the software on the condition that a license for a previous version of the product is already held.The licensee receives a new license agreement and CoL with the upgrade. This CoL, together with the CoL for the previous product, proves that the new version is licensed.A separate upgrade must be purchased for each original license of the software to be upgraded.
ServicePackServicePacks are used to debug existing products. ServicePacks may be duplicated for use as prescribed accord-ing to the number of existing original licenses.
License keySiemens Industry Automation & Drive Technologies supplies software products with and without license keys.The license key serves as an electronic license stamp and is also the "switch" for activating the software (floating license, rental license, etc.).The complete installation of software products requiring license keys includes the program to be licensed (the software) and the license key (which represents the license).
Detailed explanations concerning license conditions can be found in the “Terms and Conditions of Siemens AG” or underhttp://www.siemens.com/industrymall(Industry Mall Online-Help System)
FI01_2011_Kap10_en.book Seite 12 Mittwoch, 2. Februar 2011 6:16 18
© Siemens AG 2011
AppendixSubject Index
10/13Siemens FI 01 · 2011 US Edition
10
Page
AAccessories
for ultrasonic level metersfor SITRANS F US clamp-onfor SITRANS F US Inlinefor older flowmeters SITRANS F US SONOFLOfor SITRANS P300for SITRANS P DS III
5/1784/2574/2624/2392/442/129
Accessories set for SITRANS LC 5/291Accessories set for SITRANS LR 5/202, 5/208,
5/220, 5/229Acoustic sensors
SITRANS DA400 for pump monitoringSITRANS AS 100 for material flow monitoringSITRANS CU 02 for material flow monitoring
7/57/107/14
Analog output module SITRANS LU AO 5/156Antenna configurations for SITRANS LR 5/201AS 100 7/10CCable hanger for submersible sensor 2/16Capacitive level measurements 5/256Capacitance switches for level measurement 5/7Clamp-on system, SITRANS F US ultrasonic flow-meters 4/257Communication and software 9/..Conditions of sale and delivery 10/28Contact partner 10/4Continuous radar level instruments 5/183Continuous ultrasonic level transmitters 5/121Control of water distribution and waste water collection systems 5/141Control unit SITRANS CU 02 7/14Criteria for selection of flow meters 4/9DDiaphragm seals
Flange-typeFlanged off-line typeFlanged off-line low-pressure typeInline, with quick connectionInline, wafer for pressurePancake typeSaddleThreaded designThreaded design, low-pressureWith quick connection
2/1382/145, 2/1462/1522/148, 2/1542/1592/1662/1442/1682/1632/1642/158
Displays 8/10Double shut-off valves 2/178DRD connection 2/42, 2/88EEasy Aiming devices (EA) 5/178Echomax 5/162 ... 5/177Electro-mechanical switches for level measurement 5/112Electropneumatic positioners
SIPART PS2VP300
6/..7/126/3
FFactory-mounting of valve manifolds on pressure transmitters
SITRANS P300SITRANS P DS III
2/452/135
Field indicator SITRANS TF 3/43Fieldbus transmitter for temperature 3/50Five-spindle valve manifold 2/179Fittings for measuring instruments for pressure, mounting examples 2/177Flange-type diaphragm seal 2/145, 2/146,
2/150Flowmeters
Electromagnetic, SITRANS F MSITRANS F C, CoriolisUltrasonic, SITRANS F US clamp-onUltrasonic, SITRANS F US inline flowmetersVortex, SITRANS FX
4/..4/11 ... 4/1264/127 ... 4/1954/257 ... 4/3364196 ... 4/2564/340 ... 4/356
F (continued)Flushing ring 2/156FMCW principle 5/183FMS mounting system for level measurements 5/180FOUNDATION Fieldbus 2/29, 2/51, 2/69,
6/23, 9/7
GGuided wave radar transmitters for level measurement 5/230
HHART communicator 2/28, 2/50, 2/69HART protocol 9/2HART modem 2/28, 2/50, 2/69,
3/18, 3/36, 3/40, 3/47, 9/2
HydroRanger 200 5/128HydroRanger Plus 5/137
IIE/WSN-PA LINK 8/27Information and ordering options on the Internet and on DVD 10/4Inline diaphragm seal
With quick connectionWafer for prssure
2/1592/166
Installation conditions for SITRANS F flowmeterCoriolis SITRANS F CElectromagnetic SITRANS F MUltrasonic SITRANS F US
4/2754/114/196
Isolating power supplies and output isolators 8/4IWLAN 9/4
LLeak detection systems 4/309Level measurements using radar 5/183 ... 5/255Level measurements with microwave pulsetechnology 5/183
MMaintenance Diagnostic Station 9/9MDS 9/9Measuring instruments for pressure 2/..Measuring instruments for temperature 3/..Measuring setups
with remote sealswithout remote seals
2/1702/1712/1173
Milltronics MFA 4p motion failure alarm controller 7/17Milltronics Millpulse 600 7/23Milltronics Tiltswitch 5/112Milltronics WM100 7/25Minibolt 2/44, 2/57, 2/63,
2/132Motion failure alarm controller MFA 4p 7/17Motion sensors 7/17Mounting of SIPART PS2 on linear and part-turn actuators
6/36
MultiRanger 100/200 5/133NNuG and pharmaceutical connections 2/42, 2/87OOCM III 4/337, 5/292Output isolators with HART 8/4Oval flange 2/182Output isolator HART SITRANS I200 8/7PPancake type diaphragm seal 2/144PMC connection for paper industry 2/47Point level measurement 5/7Pointek CLS 5/10 ...5/73Pointek ULS200 5/117Positioners, electropneumatic 6/..Position sensor NCS for linear and part-turn actuators 6/13
Page
FI01_2011_Kap10_en.book Seite 13 Mittwoch, 2. Februar 2011 6:16 18
© Siemens AG 2011
AppendixSubject Index
10/14 Siemens FI 01 · 2011 US Edition
10
P (continued)Power supply unit, SITRANS I 8/4Pressure equipment directive 97/23/EC 10/9Process monitoring 7/..PROFIBUS PA interface 2/29, 2/51, 2/69,
9/6QQuestionnaire
Checking of transmitter/remote seal combinationsHydrostatic level measurements
2/1762/175
R Radar level instruments 5/183 ... 5/255Remote data manager 8/16Remote seals 2/138Rotating paddle switch, SITRANS LPS200 5/104SSanitary process connections
Bio-Connect, Bio-Control, DRD, Varivent 2/38, 2/39, 2/42, 2/85, 2/86, 2/88
Satellite alarm module SITRANS LU SAM 5/154Sensors for electromagnetic flow measurements
SITRANS F M MAG 1100SITRANS F M MAG 1100 FSITRANS F M MAG 3100SITRANS F M MAG 3100 PSITRANS F M MAG 5100 W911/E
4/474/554/784/714/614/93
Service & Support 10/6SIMATIC PDM 9/11SIPART PS2 6/12SITRANS AS 100 acoustic sensor 7/10SITRANS AW200 WirelessHART adapter 8/21SITRANS CU 02 7/14SITRANS DA400 7/5SITRANS F C
Transmitters MASS 6000 IP67Transmitters MASS 6000 for 19“Transmitters MASS 6000 Ex dTransmitters SIFLOW FC070Sensor SITRANS FCS200Sensor SITRANS FC300Sensor MASS 2100 DI 1.5Sensor MASS 2100 DI 3 to DI 40Sensor MASS MC2
4/1274/1374/1414/1484/1544/1584/1674/1634/1724/183
SITRANS F MTransmitters MAG 5000/6000Transmitters MAG 5000/6000 I Ex dSensor MAG 1100Sensor MAG 1100 FSensor MAG 3100Sensor MAG 3100 PSensor MAG 5100 WTransmitters Transmag 2 with sensor 911/EWater meters MAG 8000
4/114/314/434/474/554/784/714/614/934/108
SITRANS F US inline flowmetersSITRANS FUS060SITRANS FUS080SITRANS FUS380SITRANS FUE380SITRANS FUS880SITRANS FUE950SONOKIT (with FUS060)
4/1964/2054/2114/2284/2334/2524/2434/217
SITRANS F US clamp-onSITRANS FST1010 BasicSITRANS FUE1010 EnergySITRANS FUE1010 HVAC Check metering kitSITRANS FUG1010 GasSITRANS FUG1010 Gas Check metering kitSITRANS FUH1010 OilSITRANS FUP1010 PortableSITRANS FUP1010 Water/Liquid Check metering kitSITRANS FUS1010 StandardSITRANS FUT1010 Liquid and gas
4/2574/2804/2924/3004/3114/3184/3024/2844/2904/2704/319
SITRANS FX300 4/340SITRANS I 8/..
Page
S (continued)SITRANS I100 8/4SITRANS I200 8/7SITRANS LC300 5/256SITRANS LC500 5/267SITRANS LG200 5/233SITRANS LPS200 5/104SITRANS LR 5/183 ... 5/229SITRANS LU 5/146 ... 5/157SITRANS LU AO analog output module 5/156SITRANS LUC500 5/141SITRANS LVL 5/74 ... 5/93SITRANS LVS 5/92 ... 5/103SITRANS LPS200 5/104SITRANS P 2/..SITRANS P spare parts
DS IIIP300
2/1292/44
SITRANS P transmitters for differential pressureDS III seriesP250 series
2/1072/10
SITRANS P transmitters for gauge pressureSITRANS P ZSITRANS P MPSSITRANS P280SITRANS P300SITRANS P DS III
2/42/152/192/242/47, 2/64
SITRANS P transmitters for flow DS III series 2/107SITRANS P transmitters for level DS III series 2/4, 2/15, 2/120SITRANS P for gauge and absolute pressure with front-flush diaphragm, DS III series 2/79SITRANS P with PMC connection for paper industry diaphragm
DS IIIP300
2/47
2/522/58
SITRANS P transmitters for absolute pressureSITRANS P DS IIISITRANS P280SITRANS P300SITRANS P Z
2/52, 2/642/192/242/4
SITRANS P280 2/19SITRANS P300 2/24, 2/47SITRANS Probe LR 5/186SITRANS Probe LU 5/124SITRANS RD100 8/10SITRANS RD200 8/12SITRANS RD500 8/16SITRANS TF, 2-wire system 3/43SITRANS TF, field indicator 3/43SITRANS TF, fieldbus transmitter 3/50SITRANS TF280, WirelessHART 3/38SITRANS TH100 3/4SITRANS TH200 3/7SITRANS TH300 3/14SITRANS TH400 3/21SITRANS TR200 3/26SITRANS TR300 3/32SITRANS VP300 6/3SITRANS WM100 7/25SmartLinx modules 5/295Software
SIMATIC PDMSIPROM T
9/113/5, 3/11, 3/18, 3/24, 3/29, 3/36, 3/47, 3/53
Software licenses 10/12ST-H, ultrasonic sensor 5/159Submersible sensor, SITRANS P MPS 2/15System information
SITRANS F C (Coriolis)SITRANS F M (electromagnetic)SITRANS F US (ultrasonic) clamp-onSITRANS F US (ultrasonic) Inline flowmeters
4/1274/114/2574/196
Page
FI01_2011_Kap10_en.book Seite 14 Mittwoch, 2. Februar 2011 6:16 18
© Siemens AG 2011
AppendixSubject Index
10/15Siemens FI 01 · 2011 US Edition
10
TTank connection TG52/50 and TG52/150 2/43, 2/88Temperature errors when using remote seals 2/150, 2/153Temperature sensors
TS-3 for ultrasonic measuring instruments 5/181Temperature transmitters for rail mounting
SITRANS TR200SITRANS TR300
3/263/32
The Probe, compact device 5/121Thickness gauge 4/259Three-spindle valve manifold 2/179Training 10/2Transmag 2 with sensor 911/E 4/93Transmitters for gauge pressure and absolute pres-sure for food, pharmaceuticals and biotechnology 2/24Transmitters SITRANS F US
clamp-oninline flowmeters
4/257 ... 4/3284/196 ... 4/256
Two-spindle valve manifold 2/179Two-wire system 3/4, 3/7, 3/14,
3/26, 3/32, 3/43
UUltrasonic switch for level measurement 5/114Ultrasonic transmitters for level measurement 5/121Ultrasonic transducers for level measurement
Echomax XLTEchomax XPS and XCTEchomax XRS-5ST-H
5/1585/1755/1655/1625/159
VVarivent connection 2/42, 2/87Vibrating level limit switches 5/74Vortex SITRANS FX 4/340
WWater meters MAG 8000 4/103WirelessHART communication 9/3WirelessHART adapter AW200 8/21WirelessHART gateway 8/27WirelessHART products 8/21
Page
FI01_2011_Kap10_en.book Seite 15 Mittwoch, 2. Februar 2011 6:16 18
© Siemens AG 2011
AppendixOrder No. Index
10/16 Siemens FI 01 · 2011 US Edition
10
Page6DR...6DR5-... 6/29, 6/316DR4004-... 6/32, 6/336DR63..-... 6/96DR603.-... 6/106DR6003-... 6/10, 6/116ES...6ES7390-... 4/1566ES7392-... 4/1566ES7658-... 4/215, 9/5, 9/16,
9/176ES7307-... 4/1566GK...6GK1411-... 8/29, 9/56GK1901-0DB20-6AA0 8/296GK5792-6MN00-0AA6 8/296GK5795-6MN00-0AA6 8/296GK5795-6MN01-0AA6 8/296GK5798-0CP00-1AA0 8/296GK5798-2LP00-2AA6 8/296XV...6XV1840-2AH10 8/296XV1875-5AH10 8/296XV1875-5AH20 8/296XV1875-5AH50 8/296XV1875-5AN10 8/297ME...7ME2600-... 4/3437ME2700-... 4/3457ME2800-... 4/3477ME3050-... 4/2087ME3210-... 4/2197ME3220-... 4/2217ME3400-... 4/2317ME3410-... 4/2377ME3440-... 4/254, 4/2567ME3470-... 4/2497ME350-... 4/2957ME3500-... 4/2967ME3502-... 4/2967ME3510-... 4/2867ME353-... 4/2747ME3530-... 4/2767ME3531-... 4/2767ME357-... 4/2817ME3570-... 4/2827ME3533-... 4/2767ME360-... 4/3057ME3600-... 4/3067ME3601-... 4/3067ME3603-... 4/3067ME361-... 4/3147ME3610-... 4/3157ME3611-... 4/3157ME3613-... 4/3157ME362-... 4/3257ME363-... 4/3277ME3940-... 4/3317ME3950-... 4/329, 4/332,
4/3367ME3951-... 4/259, 4/329,
4/3327ME3960-... 4/329, 4/330,
4/332 ... 4/336
7ME4100-... 4/165, 4/1787ME4200-... 4/1787ME4210-... 4/1487ME4110-... 4/139, 4/143,
4/1507ME4120-... 4/1567ME4300-... 4/1867ME4310-... 4/1877ME4400-... 4/1697ME4500-... 4/1607ME5902-.... 4/1017ME5912-.... 4/1017ME5933-... 4/96, 4/2097ME5034-... 4/957ME5610-... 4/1007ME5902-... 4/1017ME5912-... 4/1017ME5930-... 4/1007ME6110-... 4/507ME6120-... 4/517ME6140-... 4/577ME6310-... 4/837ME6320-... 4/857ME6340-... 4/737ME6520-... 4/657ME6580-... 4/677ME6810-... 4/1097ME6820-... 4/1147ME6880-... 4/1177ME6910-... 4/347ME6920-... 4/347ME6930-... 4/447MF1...7MF1564-... 2/8, 2/9, 2/177MF1570-... 2/177MF1641-... 2/147MF4...7MF4033-... 2/757MF4034-... 2/767MF4035-... 2/767MF4133-... 2/55, 2/837MF4134-... 2/55, 2/847MF4135-... 2/55, 2/847MF4233-... 2/947MF4234-... 2/957MF4235-... 2/957MF4333-... 2/1027MF4334-... 2/1037MF4335-... 2/1037MF4433-... 2/1117MF4434-... 2/1127MF4435-... 2/1127MF4533-... 2/1157MF4534-... 2/1167MF4535-... 2/1167MF4633-... 2/1247MF4634-... 2/1257MF4635-... 2/1257MF4800-... 2/1447MF4801-... 2/1447MF4803-... 2/1447MF4810-... 2/1467MF4812-... 2/127, 2/1477MF4813-... 2/147
Page7MF4814-... 2/1497MF4820-... 2/1517MF4821-... 2/1517MF4823-... 2/1517MF4825-... 2/1577MF4826-... 2/1537MF4827-... 2/1557MF4828-... 2/1557MF4840-... 2/1597MF4843-... 2/1607MF4850-... 2/1627MF4861-... 2/1637MF4862-... 2/1647MF4863-... 2/1657MF4880-... 2/1667MF4883-... 2/1677MF4890-... 2/1697MF4990-... 2/1297MF4992-... 2/1297MF4993-... 2/1307MF4994-... 2/1307MF4995-... 2/1317MF4997-1AB 2/132, 3/47, 3/537MF4997-1AC 2/21, 2/131, 2/132,
3/40, 3/47, 3/53, 5/136, 5/198, 5/202, 5/203, 5/205, 5/206, 5/218, 5/226, 5/232, 5/239, 6/33, 9/2
7MF4997-1AD 2/1327MF4997-1AE 2/1327MF4997-1AF 2/1327MF4997-1AH 2/132, 3/40, 3/47,
3/537MF4997-1AJ 2/21, 2/132, 3/47,
3/537MF4997-1AK 2/1327MF4997-1AL 2/1327MF4997-1AM 2/1327MF4997-1BB 2/21, 2/132, 3/407MF4997-1BE 2/21, 2/132, 3/40,
3/477MF4997-1BS 3/477MF4997-1C. 2/1327MF4997-1DA 2/21, 2/44, 2/133,
3/18, 3/36, 3/40, 3/47, 5/126, 5/188, 5/192, 5/193, 5/195, 5/197, 5/207, 5/214, 5/219, 5/226, 6/33, 9/2
7MF4997-1DB 2/21, 2/44, 2/133, 3/18, 3/36, 3/40, 3/47, 5/126, 5/188, 5/192, 5/193, 5/195, 5/197, 5/207, 5/214, 5/219, 5/226, 6/33, 9/2
7MF4997-1D. 2/1327MF4997-2D. 2/1327MF4997-2H. 2/44, 2/1327MF4997-1HA 2/44, 2/1337MF4997-1HB 2/44, 2/1337MF4997-1HL 2/2/44, 2/1337MF8...
Page
FI01_2011_Kap10_en.book Seite 16 Mittwoch, 2. Februar 2011 6:16 18
© Siemens AG 2011
AppendixOrder No. Index
10/17Siemens FI 01 · 2011 US Edition
10
7MF8023-... 2/367MF8024-... 2/367MF8025-... 2/367MF8123-... 2/37, 2/617MF8124-... 2/37, 2/617MF8125-... 2/37, 2/617MF8997-... 2/447MF9...7MF9000-... 2/178, 2/1797MF9006-... 2/1807MF9011-... 2/135, 2/1787MF9408-... 2/1827MF9411-... 2/179, 2/1807MH7...7MH7142-... 7/247MH7143-... 5/1137MH7144-... 7/197MH7145-... 7/197MH7146-... 7/207MH7158-... 7/267MH7560-... 7/117MH7562-... 7/157MH7723-... 5/123, 7/19, 7/20,
7/247MJ2...7MJ2000-... 7/87MJ2010-1AA 7/87MJ2400-... 7/87ML10...7ML1002... 5/338, 4/2937ML1025-... 5/1387ML1028-... 5/1387ML1034-... 5/1317ML11...7ML1100-... 5/1607ML1106-... 5/1637ML1115-... 5/1677ML1118-... 5/1697ML1123-... 5/1707ML1127-... 5/1717ML1132-... 5/1727ML1136-... 5/1737ML1141-... 5/1767ML1145-... 5/1767ML1170-... 5/1687ML1171-... 5/1707ML12...7ML1201-... 5/1227ML13...7ML1300-... 5/2407ML1301-... 5/2417ML1302-... 5/2437ML1303-... 5/2457ML1304-... 5/2477ML1305-... 5/2487ML1510-... 5/1197ML18...7ML1812-... 4/338, 5/2937ML1813-... 5/1827ML1830-1AN 5/170, 5/171,
5/1797ML1830-1AP 5/176
Page7ML1830-1AQ 5/160, 5/163,
5/167, 5/168, 5/169, 5/170, 5/179
7ML1830-1AT 5/170, 5/171, 5/179
7ML1830-1AU 5/160, 5/163, 5/167, 5/168, 5/169, 5/170, 5/172, 5/173, 5/176, 5/179
7ML1830-1AX 5/160, 5/163, 5/167, 5/169, 5/170, 5/171, 5/172, 5/173, 5/176
7ML1830-1BH 5/163, 5/167, 5/168, 5/172
7ML1830-1BJ 5/169, 5/170, 5/173
7ML1830-1BK 5/119, 5/122, 5/160, 5/163, 5/167, 5/168, 5/169, 5/170, 5/172, 5/173, 5/180
7ML1830-1BL 5/163, 5/167, 5/168, 5/169, 5/170, 5/172, 5/173, 5/180
7ML1830-1BM 5/163, , 5/167, 5/168, 5/169, 5/170, 5/172, 5/173, 5/180
7ML1830-1BN 5/163, 5/167, 5/168, 5/169, 5/170, 5/172, 5/173, 5/180
7ML1830-1BP 5/163, , 5/167, 5/168, 5/169, 5/170, 5/172, 5/173, 5/180
7ML1830-1BQ 5/163, 5/167, 5/168, 5/169, 5/170, 5/172, 5/173, 5/180
7ML1830-1BR 5/119, 5/122, 5/172
7ML1830-1BT 5/122, 5/126, 5/160
7ML1830-1BU 5/126, 5/1607ML1830-1CG 5/1957ML1830-1CH 5/1957ML1830-1CK 5/2967ML1830-1CL 5/2967ML1830-1CM 5/2967ML1830-1CP 5/2967ML1830-1CQ 5/2967ML1830-1CR 5/2967ML1830-1CS 5/2967ML1830-1DL 5/12, 5/317ML1830-1DM 5/12, 5/317ML1830-1DP 5/170, 5/1717ML1830-1DR 5/163, 5/167,
5/169, 5/1727ML1830-1DS 5/163, 5/167,
5/168, 5/169, 5/170, 5/172, 5/173
7ML1830-1DT 5/119, 5/122, 5/126
7ML1830-1GM 4/338, 5/138, 5/148, 5/152, 5/293
Page7ML1830-1GN 5/160, 5/163,
5/167, 5/169, 5/170, 5/171, 5/172, 5/173, 5/176
7ML1830-1HC 5/1957ML1830-1HD 5/1937ML1830-1HE 5/1937ML1830-1HF 5/1937ML1830-1HP 5/2967ML1830-1HQ 5/2967ML1830-1HR 5/2967ML1830-1HS 5/2967ML1830-1HT 5/2967ML1830-1JA 5/127ML1830-1JC 5/127ML1830-1JE 5/72, 5/737ML1830-1JF 5/72, 5/737ML1830-1JK 5/72, 5/737ML1830-1JL 5/1387ML1830-1JM 5/98, 5/997ML1830-1JN 5/98, 5/997ML1830-1JP 5/73, 5/2757ML1830-1JQ 5/2757ML1830-1JR 5/2757ML1830-1JV 4/338, 5/2937ML1830-1KA 5/1437ML1830-1KB 5/126, 5/1887ML1830-1KC 5/1727ML1830-1KG 5/105, 5/106,
5/107, 5/108, 5/109
7ML1830-1KH 5/105, 5/106, 5/107, 5/108, 5/109
7ML1830-1KJ 5/105, 5/106, 5/107, 5/108, 5/109
7ML1830-1KK 5/1077ML1830-1KL 5/98, 5/100, 5/1017ML1830-1KM 5/99, 5/100, 5/1017ML1830-1KN 5/258, 5/259,
5/260, 5/2617ML1830-1KR 5/1437ML1830-1KS 5/1437ML1830-1KT 5/1437ML1830-1KU 5/1437ML1830-1KV 4/338, 5/2937ML1830-1KW 4/338, 5/2937ML1830-1KX 5/1487ML1830-1KY 4/3387ML1830-1LA 5/1437ML1830-1LB 5/1437ML1830-1LC 5/1437ML1830-1LD 5/1437ML1830-1LE 5/1437ML1830-1LF 5/1437ML1830-1LG 5/1197ML1830-1LH 5/1197ML1830-1LN 5/1487ML1830-1LP 5/1487ML1830-1LQ 5/152, 5/1487ML1830-1LR 5/1387ML1830-1LS 5/1387ML1830-1LT 4/3387ML1830-1LT 5/293
Page
FI01_2011_Kap10_en.book Seite 17 Mittwoch, 2. Februar 2011 6:16 18
© Siemens AG 2011
AppendixOrder No. Index
10/18 Siemens FI 01 · 2011 US Edition
10
7ML1830-1LU 5/1387ML1830-1LV 5/1387ML1830-1LW 5/1387ML1830-1LX 5/1387ML1830-1LY 5/1527ML1830-1MA 5/1487ML1830-1MD 5/130, 5/131,
5/1357ML1830-1ME 5/130, 5/131,
5/1357ML1830-1MF 5/130, 5/131,
5/1357ML1830-1MG 4/338, 5/2937ML1830-1ML 5/152
7ML1830-1NC 5/83, 5/867ML1830-1NS 5/947ML1830-1NT 5/947ML1830-1NU 5/947ML1830-2AA 4/338, 5/2937ML1830-2AC 5/1387ML1830-2AG 5/1437ML1830-2AK 5/130, 5/1357ML1830-2AM 5/1317ML1830-2AN 5/126, 5/148,
5/1527ML1841-... 5/3127ML19...7ML1930-1AA 5/1227ML1930-1AB 5/1227ML1930-1AC 4/338, 5/119,
5/130, 5/131, 5/135, 5/138, 5/143, 5/148, 5/152, 5/293
7ML1930-1AE 5/1437ML1930-1AF 5/1437ML1930-1AG 5/1437ML1930-1AH 5/2197ML1930-1AJ 5/2197ML1930-1AK 4/338, 5/2937ML1930-1AL 4/338, 5/2937ML1930-1BE 5/1827ML1930-1BJ 5/167, 5/168,
5/169, 5/170, 5/171, 5/172, 5/173, 5/176, 5/182
7ML1930-1BK 5/192, 5/193, 5/195, 5/197, 5/207, 5/214
7ML1930-1BL 5/214, 5/2267ML1930-1BM 5/214, 5/2267ML1930-1BN 8/107ML1930-1BP 8/107ML1930-1BQ 8/107ML1930-1BR 8/147ML1930-1BS 8/147ML1930-1BT 8/147ML1930-1BU 8/147ML1930-1BV 8/147ML1930-1BW 8/147ML1930-1BX 8/147ML1930-1BY 8/147ML1930-1CC 8/147ML1930-1CD 8/147ML1930-1CF 8/147ML1930-1CG 8/14
Page7ML1930-1CH 8/147ML1930-1CJ 8/147ML1930-1CK 8/147ML1930-1CL 8/147ML1930-1CM 8/147ML1930-1CN 8/147ML1930-1CP 8/147ML1930-1CQ 8/147ML1930-1CR 8/147ML1930-1CS 8/147ML1930-1CT 8/147ML1930-1CU 8/147ML1930-1CV 8/147ML1930-1CW 8/147ML1930-1CX 8/147ML1930-1CY 8/147ML1930-1DA 8/147ML1930-1DC 8/147ML1930-1DJ 5/2467ML1930-1DQ 5/867ML1930-1DR 5/867ML1930-1DS 5/867ML1930-1DT 5/867ML1930-1DU 5/867ML1930-1DV 5/867ML1930-1DW 5/867ML1930-1DX 5/867ML1930-1EA 5/867ML1930-1EB 5/867ML1930-1EC 5/867ML1930-1ED 5/867ML1930-1EE 5/76, 5/837ML1930-1EF 5/76, 5/837ML1930-1EG 5/76, 5/837ML1930-1EH 5/76, 5/837ML1930-1EJ 5/76, 5/837ML1930-1EK 5/76, 5/837ML1930-1EP 8/197ML1930-1EQ 8/197ML1930-1ER 8/197ML1930-1ES 8/197ML1930-1ET 8/197ML1930-1EU 8/197ML1930-1EX 8/197ML1930-1EY 8/197ML1930-1FB 8/197ML1930-1FC 8/197ML1930-1FD 8/197ML1930-1FE 8/197ML1930-1FF 8/197ML1930-1FG 8/197ML1930-1FH 8/197ML1930-1FM 8/197ML1930-1FN 8/197ML1998-1AB11 4/3387ML1998-1AB21 4/3387ML1998-1AB31 4/3387ML1998-1AC02 5/1387ML1998-1AP03 5/130, 5/131,
5/1357ML1998-1AP03 5/138, 5/143,
5/148, 5/152, 5/296
7ML1998-1AQ03 5/130
Page7ML1998-1AQ03 5/131, 5/135,
5/138, 5/143, 5/148, 5/152, 5/296
7ML1998-1AQ12 5/130, 5/131, 5/135, 5/138, 5/143, 5/148, 5/152, 5/296
7ML1998-1AQ33 5/130, 5/131, 5/135, 5/138, 5/143, 5/148, 5/152, 5/296
7ML1998-1BF01 5/148, 5/152, 5/296
7ML1998-1BF11 5/2967ML1998-1BF31 5/148, 5/152,
5/2967ML1998-1BG01 5/148, 5/152,
5/2967ML1998-1BH02 5/130, 5/131,
5/135, 5/138, 5/143, 5/296
7ML1998-1BH12 5/2967ML1998-1DU01 5/168, 5/1707ML1998-1EM31 5/1827ML1998-1FC05 5/1317ML1998-1FL01 5/1137ML1998-1XB63 5/1197ML1998-5AB01 4/338, 5/2937ML1998-5AN02 5/1527ML1998-5BD02 5/1487ML1998-5BE02 5/1487ML1998-5BK61 5/1807ML1998-5BL61 5/1807ML1998-5BM61 5/1807ML1998-5BP61 5/1807ML1998-5BQ61 5/1807ML1998-5CE01 5/1567ML1998-5CE31 5/1567ML1998-5CF02 5/1547ML1998-5CF32 5/1547ML1998-5DG02 7/247ML1998-5DG22 7/247ML1998-5DM02 7/117ML1998-5DM12 7/117ML1998-5DM21 7/117ML1998-5DM32 7/117ML1998-5DN01 7/157ML1998-5DN11 7/157ML1998-5DN31 7/157ML1998-5EM01 5/1827ML1998-5EW01 4/3387ML1998-5EW01 5/2937ML1998-5FB06 5/1357ML1998-5FB23 5/1357ML1998-5FC03 5/1307ML1998-5FH06 5/2197ML1998-5FH22 5/2197ML1998-5FM01 7/19, 7/207ML1998-5FM11 7/19, 7/207ML1998-5FM21 7/19, 7/207ML1998-5FM31 7/19, 7/207ML1998-5FS62 5/105, 5/106,
5/107, 5/108, 5/109
7ML1998-5FT62 5/98, 5/99, 5/100, 5/101
Page
FI01_2011_Kap10_en.book Seite 18 Mittwoch, 2. Februar 2011 6:16 18
© Siemens AG 2011
AppendixOrder No. Index
10/19Siemens FI 01 · 2011 US Edition
10
7ML1998-5FT63 5/947ML1998-5GC63 5/1227ML1998-5GD62 5/1227ML1998-5GE01 5/2757ML1998-5GE21 5/2757ML1998-5GG02 5/617ML1998-5GL01 5/1437ML1998-5GL31 5/1437ML1998-5HE02 5/258, 5/259,
5/260, 5/2617ML1998-5HE21 5/258, 5/259,
5/260, 5/2617ML1998-5HG62 5/1797ML1998-5HR02 5/1887ML1998-5HT02 5/1267ML1998-5HV61 5/160, 5/163,
5/167, 5/168, 5/169, 5/170, 5/171, 5/172, 5/173, 5/176
7ML1998-5HX62 5/1727ML1998-5JB02 5/1267ML1998-5JE03 5/2077ML1998-5JF03 5/2077ML1998-5JH02 5/31, 5/497ML1998-5JJ02 5/31, 5/497ML1998-5JM02 5/2267ML1998-5JP02 5/192, 5/193,
5/195, 5/1977ML1998-5JR01 5/1927ML1998-5JR02 5/193, 5/195,
5/1977ML1998-5JS01 8/147ML1998-5JS21 8/147ML1998-5JS31 8/147ML1998-5JU01 8/107ML1998-5JU11 8/107ML1998-5JU31 8/107ML1998-5JV01 8/147ML1998-5JV31 8/147ML1998-5JW01 8/147ML1998-5JW31 8/147ML1998-5JX01 8/147ML1998-5JX31 8/147ML1998-5KA01 5/240, 5/2427ML1998-5KA01 5/244, 5/246,
5/247, 5/2487ML1998-5KE01 5/2147ML1998-5KE31 5/2147ML1998-5KF01 5/2147ML1998-5KL01 5/2077ML1998-5KN01 5/767ML1998-5KN21 5/767ML1998-5KP01 5/767ML1998-5KP21 5/767ML1998-5KQ01 5/837ML1998-5KR01 5/837ML1998-5KV01 5/867ML1998-5KW01 5/867ML1998-5LS01 5/837ML1998-5LS01 5/867ML1998-5MA01 8/197ML1998-5MA31 8/197ML1998-5MB01 8/197ML1998-5MB31 8/19
Page7ML1998-5MC01 8/197ML1998-5MC31 8/197ML1998-5MD01 8/197ML1998-5MD31 8/197ML1998-5ME01 8/197ML1998-5ME31 8/197ML1998-5MF01 8/197ML1998-5MF31 8/197ML1998-5MJ01 8/197ML1998-5MJ31 8/197ML1998-5MK01 8/197ML1998-5MK31 8/197ML1998-5MW01 7/267ML1998-5MW31 7/267ML1998-5QD83 5/1357ML1998-5QJ82 5/127ML1998-5QK82 5/1607ML1998-5QM82 5/1677ML1998-5QM82 5/169, 5/170,
5/171, 5/172, 5/173
7ML1998-5QN83 5/2197ML1998-5QP81 5/1887ML1998-5QR81 5/1267ML1998-5QS81 5/1767ML1998-5QT81 5/1637ML1998-5QV81 5/1267ML1998-5QW82 5/2267ML1998-5QX82 5/2077ML1998-5QY82 5/31, 5/497ML1998-5XA82 5/31, 5/497ML1998-5XC81 5/193, 5/195,
5/1977ML1998-5XC82 5/1927ML1998-5XD81 5/192, 5/193,
5/195, 5/1977ML1998-5XE82 5/2077ML1998-5XG81 5/2407ML1998-5XG81 5/2427ML1998-5XG81 5/244, 5/246,
5/247, 5/2487ML1998-5XJ81 5/2147ML1998-5XN81 5/2077ML50...7ML5001-... 5/1437ML5004-... 5/1487ML5007-... 5/1527ML5033-... 5/1457ML5034-... 5/1417ML52...7ML5221-... 5/1267ML54...7ML5421-... 5/1927ML5422-... 5/1927ML5423-... 5/1947ML5424-... 5/1937ML5425-... 5/1967ML5426-... 5/2267ML5427-... 5/2147ML5430-... 5/1887ML5431-... 5/2077ML55...7ML5501-... 5/127ML5513-... 5/270
Page7ML5515-... 5/2717ML5517-... 5/2737ML5523-... 5/2757ML56...7ML5601-... 5/597ML5602-... 5/597ML5603-... 5/607ML5604-... 5/617ML5610-... 5/127ML5630-... 5/187ML5631-... 5/197ML5632-... 5/207ML5633-... 5/217ML5634-... 5/227ML5640-... 5/267ML5641-... 5/277ML5642-... 5/287ML5643-... 5/297ML5644-... 5/307ML5650-... 5/417ML5651-... 5/427ML5652-... 5/437ML5660-... 5/467ML5661-... 5/477ML5662-... 5/487ML5670-... 5/2587ML5671-... 5/2597ML5672-... 5/2607ML5673-... 5/2617ML57...7ML5711-.. 5/1057ML5725-... 5/1057ML5726-... 5/1067ML5727-... 5/1077ML5728-... 5/1087ML5730-... 5/1097ML5731-... 5/977ML5732-... 5/997ML5733-... 5/1007ML5734-... 5/1017ML5735-... 5/947ML5740-... 8/147ML5741-... 8/107ML5745-... 5/767ML5746-... 5/827ML5747-... 5/847ML5750-... 8/197ML58...7ML5810-1A 5/1567ML5811-1A 5/1547ML5830-2AH 5/126, 5/1887ML5830-2AJ 5/126, 5/219,
5/2267MP1...7MP1110-... 3/40, 9/57MP1120-... 2/21, 9/57MP1990-0AA00 2/21, 3/407MP1990-0BA00 3/407MP1990-0BB00 3/407MP3...7MP3112-... 8/24, 9/57MP3990-0AA00 8/247MP3990-0BA00 8/247MP3990-0BB00 8/24
Page
FI01_2011_Kap10_en.book Seite 19 Mittwoch, 2. Februar 2011 6:16 18
© Siemens AG 2011
AppendixOrder No. Index
10/20 Siemens FI 01 · 2011 US Edition
10
7MP3990-0BC00 8/247MP3990-0BD00 8/247MP3990-0CA00 8/247NG3...7NG3032-0JN00 3/297NG3032-1JN00 3/297NG3033-0JN00 3/367NG3033-1JN00 3/367NG3092-8KA 3/5, 3/11, 3/18,
3/247NG3092-8KC 3/5, 3/11, 3/18,
3/247NG3092-8KM 3/1117NG3092-8KU 3/5, 3/11, 3/29,
3/477NG313-... 3/47, 3/537NG3211-0AN00 3/57NG3211-0BN00 3/57NG3211-0NN00 3/57NG3211-1AN00 3/117NG3211-1BN00 3/117NG3211-1NN00 3/117NG3212-0AN00 3/187NG3212-0BN00 3/187NG3212-0NN00 3/187NG3214-0AN00 3/247NG3214-0NN00 3/247NG3215-0AN00 3/247NG3215-0NN00 3/247NG4...7NG4122-1AA10 5/127NG4124-0AA00 8/67NG4131-0AA00 8/8, 6/337NG4998-1AA 8/6, 8/87NG4998-1AB 8/6, 8/89AE4...9AE4110-3AA00 9/5, 9/8A5E0...A5E00047090 2/133A5E00047092 2/133A5E00047093 2/133A5E00053218 2/133A5E00053219 2/133A5E00053220 2/133A5E00053274 2/133A5E00053275 2/133A5E00053276 2/133A5E00053277 2/133A5E00053278 2/133A5E00053279 2/133A5E00074601 6/33A5E00074630 6/33A5E00074631 6/33A5E00078060 2/133A5E00090345 2/133A5E00090345 2/44A5E00097485 6/33A5E00102775 4/95A5E00120717 6/33A5E00127924 6/33A5E00127926 6/33A5E00135275 4/95A5E00135276 4/95A5E00192774 4/95
PageA5E00214567 6/33A5E00214568 6/33A5E00214569 6/33A5E00279627 2/133A5E00279629 2/133A5E00279630 2/133A5E00279631 2/133A5E00279632 2/133A5E00282355 2/133A5E00351420 6/33A5E00359576 2/44A5E00359577 2/44A5E00359578 2/44A5E00359579 2/44A5E00359580 2/44A5E00359581 2/44A5E00364512 3/5, 3/11, 3/18,
3/24, 3/29, 3/36, 3/47, 3/53
A5E00414587 2/44A5E00414588 2/44A5E00414589 2/44A5E00414590 2/44A5E00414591 2/44A5E00414592 2/44A5E00694468 4/214, 4/239A5E00694500 4/214, 4/239A5E00694509 4/214, 4/239A5E00694660 4/214, 4/239A5E00695277 4/215, 4/239A5E00695476 4/215, 4/239A5E00695479 4/215, 4/239A5E00695480 4/215, 4/239A5E00695483 4/215, 4/239A5E00695486 4/215, 4/239A5E00698213 4/169A5E00730100 4/214, 4/232,
4/238A5E00740611 4/214, 4/232,
4/238A5E00740986 4/109, 4/114,
4/117A5E00741021 4/109, 4/114,
4/117A5E00741031 4/109, 4/114,
4/117A5E00746629 4/169A5E00754173 4/214, 4/232,
4/238A5E00754188 4/214, 4/232,
4/238A5E00814557 4/220A5E00822490 4/36A5E00822501 4/36, 4/139A5E00832342 4/139A5E00835255 4/223A5E00836462 4/223A5E00836868 4/36A5E00839427 4/223A5E00839435 4/223A5E00839437 4/223A5E00839460 4/223A5E00839476 4/223A5E00839477 4/223A5E00861432 4/210, 4/225
PageA5E00861435 4/210, 4/225A5E00862482 4/126A5E00862487 4/126A5E00862492 4/126A5E00862497 4/126A5E00873496 4/215A5E00875101 4/210, 4/225A5E00875105 4/210, 4/225A5E00924779 4/156A5E01002946 4/125A5E01002947 4/125A5E01002948 4/125A5E01002950 4/125A5E01002952 4/125A5E01002953 4/125A5E01002954 4/125A5E01002955 4/125A5E01002957 4/125A5E01002958 4/125A5E01002962 4/125A5E01013127 4/46A5E01013340 4/46A5E01018400 4/52A5E01087872 5/229A5E01091262 5/229A5E01150022 4/75A5E01150028 4/75A5E01150378 4/87A5E01150379 4/88A5E01150381 4/88A5E01150880 4/75A5E01150882 4/75A5E01150918 4/75A5E01150922 4/75A5E01151121 4/75A5E01151124 4/75A5E01151194 4/87A5E01151197 4/88A5E01151199 4/88A5E01151539 5/208A5E01151553 5/208A5E01151569 5/208A5E01151571 5/208A5E01151573 5/208A5E01151577 5/208A5E01151584 5/208A5E01151585 5/208A5E01151587 5/208A5E01151626 5/208A5E01152876 4/75A5E01152889 4/75A5E01152910 4/75A5E01152913 4/75A5E01153422 4/87A5E01153424 4/88A5E01153427 4/88A5E01156819 5/208A5E01156823 5/208A5E01156827 5/208A5E01156834 5/208A5E01156835 5/208A5E01156836 5/208A5E01156839 5/208
Page
FI01_2011_Kap10_en.book Seite 20 Mittwoch, 2. Februar 2011 6:16 18
© Siemens AG 2011
AppendixOrder No. Index
10/21Siemens FI 01 · 2011 US Edition
10
A5E01156843 5/208A5E01158875 4/75A5E01158886 4/75A5E01158891 4/88A5E01159074 4/75A5E01159146 4/75A5E01159150 4/75A5E01159628 4/87A5E01159629 4/88A5E01159631 4/88A5E01163671 5/72A5E01163672 5/72A5E01163673 5/72A5E01163674 5/72A5E01163676 5/72A5E01163677 5/72A5E01163678 5/72A5E01163679 5/72A5E01163680 5/72A5E01163681 5/72A5E01163682 5/72A5E01163683 5/72A5E01163684 5/72A5E01163685 5/72A5E01163686 5/72A5E01163688 5/72, 5/291A5E01163689 5/72, 5/291A5E01163690 5/72, 5/291A5E01163691 5/72, 5/291A5E01163693 5/72, 5/291A5E01163695 5/72, 5/291A5E01163697 5/72A5E01163698 5/72A5E01163699 5/72A5E01163700 5/72A5E01163701 5/72A5E01163702 5/72A5E01163709 5/291A5E01163710 5/291A5E01163711 5/291A5E01163712 5/291A5E01163713 5/291A5E01163714 5/291A5E01163717 5/291A5E01163719 5/73A5E01163720 5/73A5E01163721 5/73A5E01163722 5/73A5E01163723 5/73A5E01163724 5/73A5E01163725 5/73A5E01163726 5/73A5E01163727 5/73, 5/291A5E01163728 5/73, 5/291A5E01163729 5/73, 5/291A5E01163730 5/291A5E01164206 4/139A5E01164211 4/139A5E01171569 4/125A5E01181599 4/52A5E01181606 4/52A5E01181610 4/52A5E01181613 4/52
PageA5E01181615 4/52A5E01181616 4/52A5E01181619 4/52A5E01181622 4/52A5E01181647 4/19, 4/35A5E01181656 4/45A5E01181656 4/35A5E01181686 4/35, 4/45A5E01181689 4/35, 4/45A5E01181691 4/35, 4/45A5E01181699 4/35, 4/45A5E01181703 4/35, 4/45A5E01181705 4/35, 4/45A5E01191940 4/75A5E01191941 4/75A5E01191943 4/75A5E01191944 4/75A5E01191946 4/75A5E01191947 4/75A5E01191949 4/75A5E01191950 4/75A5E01191951 4/757A5E01191952 4/75A5E01191961 4/75A5E01191962 4/75A5E01191963 4/75A5E01191964 4/75A5E01191965 4/75A5E01191966 4/75A5E01191967 4/75A5E01191968 4/75A5E01191969 4/75A5E01191971 4/75A5E01191973 4/75A5E01191974 4/75A5E01191975 4/75A5E01191976 4/75A5E01191977 4/75A5E01191978 4/75A5E01191979 4/75A5E01191980 4/75A5E01191981 4/75A5E01191982 4/75A5E01191983 4/75A5E01191984 4/75A5E01191985 4/75A5E01191986 4/75A5E01191987 4/75A5E01191988 4/75A5E01191989 4/75A5E01191990 4/75A5E01191991 4/75A5E01191992 4/75A5E01191993 4/75A5E01191994 4/75A5E01191995 4/75A5E01191996 4/75A5E01196952 4/210, 4/225A5E01204521 4/208, 4/220,
4/222A5E01208092 4/215, 4/239A5E01208114 4/215, 4/239A5E01208117 4/215, 4/239A5E01208121 4/215, 4/239
PageA5E01208126 4/215, 4/239A5E01208138 4/214, 4/239A5E01209496 4/37A5E01209500 4/37A5E01258635 6/11A5E01258666 6/11A5E01259467 5/229A5E01261834 5/229A5E01261979 5/229A5E01261981 5/229A5E01278662 4/210, 4/225A5E01278682 4/210, 4/225A5E01278687 4/210, 4/225A5E01278698 4/210, 4/225A5E01483480 5/202A5E01483547 5/202A5E01623511 5/229A5E01623512 5/229A5E01623513 5/229A5E01623514 5/229A5E02054250 4/35, 4/45, 4/139,
4/143, 4/151A5E02082880 4/35A5E02083319 4/44A5E02083914 5/229A5E02083915 5/229A5E02083916 5/229A5E02100423 4/343A5E02123845 4/208A5E02123845 4/220A5E02123845 4/222A5E02154544 4/187A5E02165924 5/229A5E02181087 4/348A5E02181116 4/348A5E02181152 4/348A5E02181157 4/348A5E02181175 4/348A5E02181180 4/348A5E02181221 4/348A5E02181307 4/348A5E02181316 4/348A5E02181322 4/348A5E02181437 4/348A5E02181439 4/348A5E02181464 4/348A5E02181488 4/348A5E02181492 4/348A5E02181495 4/348A5E02181515 4/348A5E02181525 4/348A5E02181527 4/348A5E02181531 4/348A5E02181541 4/348A5E02181544 4/348A5E02181558 4/348A5E02181562 4/348A5E02210835 4/44A5E02212423 5/229A5E02212424 5/229A5E02212428 5/229A5E02212429 5/229A5E02213428 5/229A5E02246194 4/226
Page
FI01_2011_Kap10_en.book Seite 21 Mittwoch, 2. Februar 2011 6:16 18
© Siemens AG 2011
AppendixOrder No. Index
10/22 Siemens FI 01 · 2011 US Edition
10
A5E02246258 4/226A5E02246304 4/226A5E02246309 4/226A5E02246311 4/226A5E02246350 4/209A5E02246356 4/209A5E02246369 4/96, 4/209A5E02246378 4/209A5E02246396 4/209A5E02246396 4/96A5E02247877 4/209A5E02254228 4/156A5E02275105 4/348A5E02296329 4/35, 4/45A5E02296464 4/35, 4/45A5E02296490 4/35, 4/45A5E02296494 4/35, 4/45A5E02296498 4/35, 4/45A5E02303897 5/229A5E02328485 4/37, 4/139, 4/215,
4/239A5E02338368 4/35A5E02342413 4/44A5E02375819 4/348A5E02435647 4/50, 4/51, 4/58A5E02445496 4/222A5E02448278 5/208A5E02455728 5/242A5E02475650 4/124A5E02478541 4/215, 4/225A5E02478751 4/215, 4/225A5E02479158 5/242, 4/250A5E02551182 4/125A5E02551263 4/125A5E02551331 4/209A5E02551334 4/209A5E02554972 4/222A5E02555037 4/222A5E02555044 4/222A5E02559809 4/37A5E02559810 4/37A5E02559811 4/37A5E02559812 4/36A5E02559813 4/36A5E02559814 4/36A5E02559815 4/36A5E02559816 4/37A5E02559817 4/37A5E02590427 4/160, 4/165,
4/169A5E02593565 4/45A5E02604272 4/37A5E02604280 4/37A5E02608231 4/220A5E02609214 4/225A5E02609215 4/225A5E02609216 4/225A5E02609218 4/225A5E02609219 4/225A5E02610419 4/220A5E02610428 4/220A5E02611742 4/251A5E02611749 4/251A5E02611751 4/251
PageA5E02611753 4/251A5E02611754 4/251A5E02611758 4/251A5E02611759 4/251A5E02611761 4/251A5E02611762 4/251A5E02611764 4/251A5E02611767 4/251A5E02611769 4/251A5E02611774 4/251A5E02611778 4/251A5E02611779 4/251A5E02611780 4/251A5E02611781 4/251A5E02611783 4/251A5E02611792 4/251A5E02611793 4/251A5E02611794 4/251A5E02611795 4/251A5E02611796 4/251A5E02611798 4/251A5E02639184A 4/326A5E02639185A 4/328A5E02679676 4/214, 4/239A5E02679923 4/214, 4/239A5E02699309 4/214A5E02729035 4/214A5E02729610 4/214A5E02729700 4/214A5E02734539 4/214A5E02734568 4/214A5E02734585 4/214A5E02734600 4/214A5E02814192 4/222A5E02830664-01 4/335A5E02896535 4/179A5E02896941 4/214A5E02926274 4/250A5E02926278 4/250A5E02926282 4/250A5E02926288 4/250A5E02944875 4/143A5E02944883 4/150A5E02944982 4/35A5E02944990 4/35A5E02944995 4/35A5E02951449A 4/308A5E02951519A 4/316A5E02951520A 4/278A5E02951522A 4/288A5E02951524A 4/298A5E02951529A 4/308A5E02951531A 4/316A5E02951532A 4/278A5E02951534A 4/288A5E02951536A 4/298A5E03004110 4/187A5E03005599 4/73, 4/84A5E03048701 4/214A5E03048714 4/214A5E03048719 4/214A5E03048726 4/214A5E03059912 4/214, 4/220,
4/222
PageA5E03063678 4/66, 4/67A5E03071515 4/109, 4/114,
4/117A5E03071936 4/139A5E03082907 4/125A5E03082908 4/125A5E03082909 4/125A5E03082910 4/125A5E03082911 4/125A5E03082912 4/125A5E03082913 4/125A5E03082914 4/125A5E03082915 4/125A5E03082916 4/125A5E03082917 4/125A5E03082918 4/125A5E03082919 4/125A5E03082920 4/125A5E03086288 4/73A5E03086288 4/84A5E03086290 4/73A5E03086290 4/84A5E03086291 4/73, 4/84A5E03086468A 4/326A5E03086485 4/328A5E03086487 4/283A5E03086488 4/283A5E03086491 4/298A5E03089952 4/165, 4/298A5E03251681 5/72A5E03251683 5/73A5E03252406 2/44, 2/133A5E03252407 2/44, 2/133A5E03252527 5/31, 5/49A5E03252530 5/31, 5/49A5E03354392 4/124A6X...A6X30003981 4/256A6X30004048 4/256C734...C73451-A430-D23 6/32C73451-A430-D78 6/32CQO:...CQO:1010XFM-3 4/278CQO-1012FN-PB 4/333CQO-1012FNH-PB 4/333CQO-1012FP-PB 4/334CQO-1012FPH-PB 4/334CQO-1012NFPA 4/334CQO-1012NMB-1 4/331CQO-1012TW-1 4/335CQO-1012TW-1L 4/335CQO-1012TW-2 4/335CQO-1012TW-2L 4/335CQO-1012TW-3 4/335CQO-1012TW-3L 4/335CQO-1012XMB-1 4/331CQO-1012Z-1 4/334CQO-1012Z-2 4/334CQO-1015N-5M 4/331CQO-1015N-5M-FK1 4/331CQO-1015N-5M-MK1 4/331CQO-1015N-5M-MK2 4/331CQO-1015N-5M-MK3 4/331
Page
FI01_2011_Kap10_en.book Seite 22 Mittwoch, 2. Februar 2011 6:16 18
© Siemens AG 2011
AppendixOrder No. Index
10/23Siemens FI 01 · 2011 US Edition
10
CQO-1022A1R 4/334CQO-1022B1R 4/334CQO-1022B2R 4/334CQO-1022C1R 4/334CQO-1022C2R 4/334CQO-1022D2R 4/334CQO-992ECJ 4/334CQO-992MTNHMSH-1 4/334CQO-992MTNHMSH-2 4/334CQO-992MTNHMSH-3 4/334CQO-992MTNHMSH-4 4/334CQO-CC112 4/335CQO-CC117 4/335CQO-CC117A 4/335CQO-CC120 4/335CQO:1010BNFM-3 4/308CQO:1010BXFM-3 4/308CQO:1010DVXFM-3 4/308CQO:1010GCXFM-3 4/316CQO:1010PVNFM-3 4/308CQO:1010PVXFM-3 4/308CQO:FUEHVACKIT 4/301CQO:FUG-GASAKIT 4/318CQO:FUG-GASKIT 4/318CQO:FUPW-WWKIT 4/291CQO:FUS-LIQKIT 4/291FDK:...FDK:083F0121 4/35FDK:083F0210 4/35, 4/45FDK:083F0211 4/35, 4/45FDK:083F0212 4/35, 4/45FDK:083F0213 4/35, 4/45FDK:083F3020 4/35, 4/45FDK:083F3052 4/35, 4/45FDK:083F3053 4/35, 4/45FDK:083F3054 4/35, 4/45FDK:083F3056 4/35, 4/45FDK:083F3057 4/35, 4/45FDK:083F3058 4/35, 4/45FDK:083F3092 4/35, 4/45FDK:083F3093 4/35, 4/45FDK:083F3094 4/35, 4/45FDK:083F3095 4/35, 4/45FDK:083F4123 4/37FDK:083F4525 4/36, 4/143FDK:083F5030 4/36, 4/143FDK:083F5031 4/36, 4/143FDK:083F5032 4/36, 4/143FDK:083F5033 4/36, 4/143FDK:083F5036 4/36FDK:083F5037 4/36, 4/143FDK:083F5038 4/36, 4/143FDK:083F5039 4/36FDK:083F5060 4/21FDK:083F5061 4/21, 4/37FDK:083G0116 4/52FDK:083G0117 4/52FDK:083G0119 4/52FDK:083G0121 4/52FDK:083G0122 4/52FDK:083G0123 4/52FDK:083G0124 4/52FDK:083G0125 4/52
PageFDK:083G0156 4/52FDK:083G0157 4/52FDK:083G0159 4/52FDK:083G0161 4/52FDK:083G0162 4/52FDK:083G0163 4/52FDK:083G0164 4/52FDK:083G0165 4/52FDK:083G0228 4/143FDK:083G0686 4/52FDK:083G0687 4/52FDK:083G0689 4/52FDK:083G0691 4/52FDK:083G0692 4/52FDK:083G0693 4/52FDK:083G0694 4/52FDK:083G0695 4/52FDK:083G2206 4/58FDK:083G2207 4/58FDK:083G2209 4/58FDK:083G2211 4/58FDK:083G2212 4/58FDK:083G2213 4/58FDK:083G2214 4/58FDK:083G2215 4/58FDK:083G2216 4/58FDK:083G2217 4/58FDK:083G2219 4/58FDK:083G2221 4/58FDK:083G2222 4/58FDK:083G2223 4/58FDK:083G2224 4/58FDK:083G2225 4/58FDK:083G3116 4/52FDK:083G3117 4/52FDK:083G3119 4/52FDK:083G3121 4/52FDK:083G3122 4/52FDK:083G3123 4/52FDK:083G3124 4/52FDK:083G3125 4/52FDK:083G3140 4/143FDK:083G3256 4/52FDK:083G3257 4/52FDK:083G3259 4/52FDK:083G3261 4/52FDK:083G3262 4/52FDK:083G3263 4/52FDK:083G3264 4/52FDK:083G3265 4/52FDK:083G4330 4/52FDK:083G4331 4/52FDK:083H0231 4/151FDK:083H0232 4/151FDK:083H0233 4/151FDK:083H0235 4/151FDK:083H3001 4/156, 4/186,
4/187FDK:083H3002 4/156, 4/186,
4/187FDK:083H3003 4/156, 4/186,
4/187FDK:083H3004 4/156, 4/186,
4/187
PageFDK:083H3015 4/156, 4/160,
4/165, 4/169, 4/179
FDK:083H3016 4/156, 4/160, 4/165, 4/169, 4/179
FDK:083H3017 4/156, 4/160, 4/165, 4/169, 4/179
FDK:083H3018 4/156, 4/160, 4/165, 4/169, 4/179
FDK:083H3054 4/156, 4/160, 4/165, 4/169, 4/179
FDK:083H3055 4/156, 4/160, 4/165, 4/169, 4/179
FDK:083H3061 4/151FDK:083H4260 4/139FDK:083H4272 4/144FDK:083H4273 4/144FDK:083H4274 4/144FDK:083H4275 4/144FDK:083H4294 4/144FDK:083H4295 4/144FDK:083H4296 4/144FDK:083H4410 4/160, 4/165,
4/169, 4/179, 4/187
FDK:083H5056 4/160, 4/165, 4/169, 4/179
FDK:083L8889 4/179FDK:083N8008 4/86FDK:083N8011 4/86FDK:083N8012 4/86FDK:083N8013 4/86FDK:083N8025 4/86FDK:083N8039 4/86FDK:083N8071 4/86FDK:083N8073 4/86FDK:083N8076 4/86FDK:083N8079 4/86FDK:083N8082 4/86FDK:083N8085 4/86FDK:083N8100 4/86FDK:083N8102 4/86FDK:083N8104 4/86FDK:083N8106 4/86FDK:083N8107 4/86FDK:083N8110 4/86FDK:083N8113 4/86FDK:083N8114 4/86FDK:083N8117 4/74FDK:083N8118 4/74FDK:083N8118 4/86FDK:083N8119 4/86FDK:083N8121 4/74FDK:083N8122 4/74, 4/86FDK:083N8123 4/86FDK:083N8125 4/74FDK:083N8126 4/74FDK:083N8126 4/86FDK:083N8127 4/86FDK:083N8130 4/74FDK:083N8133 4/86FDK:083N8136 4/74
Page
FI01_2011_Kap10_en.book Seite 23 Mittwoch, 2. Februar 2011 6:16 18
© Siemens AG 2011
AppendixOrder No. Index
10/24 Siemens FI 01 · 2011 US Edition
10
FDK:083N8137 4/74FDK:083N8140 4/74, 4/86FDK:083N8141 4/86FDK:083N8144 4/74FDK:083N8145 4/74FDK:083N8148 4/74, 4/86FDK:083N8149 4/86FDK:083N8157 4/86FDK:083N8158 4/86FDK:083N8165 4/86FDK:083N8166 4/86FDK:083N8173 4/86FDK:083N8174 4/86FDK:083N8182 4/86FDK:083N8183 4/86FDK:083N8190 4/86FDK:083N8191 4/86FDK:083N8271 4/74FDK:083N8272 4/74, 4/86FDK:083N8272 4/86FDK:083N8278 4/74FDK:083N8279 4/74, 4/86FDK:083N8279 4/86FDK:083N8282 4/74FDK:083N8283 4/74, 4/86FDK:083N8283 4/86FDK:083N8285 4/74FDK:083N8287 4/74, 4/86FDK:083N8289 4/74FDK:083N8291 4/74, 4/86FDK:083N8292 4/86FDK:083N8302 4/86FDK:083N8305 4/86FDK:083N8308 4/86FDK:083N8311 4/86FDK:083N8314 4/86FDK:083N8344 4/86FDK:083N8345 4/86FDK:083N8347 4/86FDK:083N8361 4/86FDK:083N8362 4/86FDK:083N8365 4/74FDK:083N8365 4/86FDK:083N8366 4/86FDK:083N8370 4/74, 4/86FDK:083N8394 4/86FDK:083N8395 4/86FDK:083N8470 4/86FDK:083N8474 4/86FDK:083N8478 4/86FDK:083N8482 4/86FDK:083N8486 4/86FDK:083N8487 4/74FDK:083N8488 4/74FDK:083N8489 4/74, 4/87FDK:083N8490 4/74FDK:083N8491 4/74, 4/87FDK:083N8492 4/74FDK:083N8493 4/74, 4/87FDK:083N8495 4/74FDK:083N8497 4/74, 4/87FDK:083N8499 4/74FDK:083N8501 4/74, 4/87
PageFDK:083N8502 4/87FDK:083N8504 4/74FDK:083N8506 4/74, 4/87FDK:083N8507 4/87FDK:083U7005 4/37FDK:083U8244 4/36FDK:085U0220 4/36, 4/50, 4/51,
4/58, 4/66, 4/67, 4/73, 4/84, 4/96, 4/124
FDK:085U0221 4/36FDK:085U0226 4/35, 4/139, 4/143,
4/151FDK:085U0229 4/35, 4/45, 4/139,
4/143FDK:085U0234 4/35, 4/45, 4/139,
4/143FDK:085U0236 4/35, 4/45, 4/139,
4/143, 4/151FDK:085U0237 4/35, 4/45, 4/139,
4/143FDK:085U0321 4/45FDK:085U1003 4/36, 4/139FDK:085U1006 4/179FDK:085U1007 4/179FDK:085U1009 4/179FDK:085U1010 4/179FDK:085U1011 4/179FDK:085U1012 4/179FDK:085U1013 4/179FDK:085U1016 4/179FDK:085U1017 4/179FDK:085U1018 4/19FDK:085U1019 4/179FDK:085U1020 4/179FDK:085U1021 4/179FDK:085U1022 4/179FDK:085U1023 4/179FDK:085U1029 4/179FDK:085U1031 4/179FDK:085U1032 4/179FDK:085U1039 4/37, 4/139FDK:085U1052 4/36FDK:085U1053 4/35FDK:085U2373 4/151FDK:085U2374 4/151FDK:085U3122 4/45FDK:085U3123 4/46FDK:085U3124 4/46FDK:085U3125 4/46FDK:085U3349 4/143FDK:087L4108 4/126FDK:087L4109 4/126FDK:087L4110 4/126FDK:087L4111 4/126FDK:087L4150 4/124FDK:087L4151 4/124FDK:087L4152 4/125FDK:087L4154 4/124FDK:087L4155 4/124FDK:087L4156 4/124FDK:087L4157 4/124FDK:087L4158 4/124FDK:087L4159 4/124FDK:087L4162 4/125
PageFDK:087L4163 4/124FDK:087L4165 4/124FDK:087L4166 4/125FDK:087L4167 4/125FDK:087L4168 4/125FDK:087L4196 4/124FDK:087L4202 4/125FDK:087L4203 4/125FDK:087L4204 4/125FDK:087L4210 4/124FDK:087L4211 4/124FDK:087L4212 4/124FDK:087L4213 4/124FDK:087L6001 4/124FDK:083G0228 4/214, 4/239FDK:085B1089 4/224FDK:085B1360 4/226FDK:085B1361 4/226FDK:085B1362 4/226FDK:085B1363 4/226FDK:085B1406 4/223FDK:085B1419 4/224FDK:085B1420 4/224FDK:085B5330 4/224FDK:085B5333 4/224FDK:085B5335 4/224FDK:085B5392 4/224FDK:085B5393 4/224FDK:085B5452 4/223FDK:085B5454 4/223FDK:085B5455 4/223FDK:085B5458 4/223FDK:085B5459 4/223FDK:085B5501 4/223FDK:085B5504 4/223FDK:085B5505 4/223FDK:085B5510 4/223FDK:085B5511 4/223FDK:085L1102 4/226FDK:085L1103 4/226FDK:085L1104 4/226FDK:085L1105 4/226FDK:085L1107 4/226FDK:085L1108 4/226FDK:085L1109 4/226FDK:085L1111 4/226FDK:085L1112 4/226FDK:085L1113 4/226FDK:085L1114 4/226FDK:085L1115 4/226FDK:085L1118 4/226FDK:085L1119 4/226FDK:085L2403 4/224FDK:087L4163 4/215, 4/239FDK:087L4212 4/215, 4/239FDK:087L4213 4/215, 4/239FDK:521HAP0553 4/256FDK:LP-M1C2E 4/36PBD-...PBD-22475K1A 5/220PBD-22475K2A 5/220PBD-22475K3A 5/220PBD-22475K4A 5/220
Page
FI01_2011_Kap10_en.book Seite 24 Mittwoch, 2. Februar 2011 6:16 18
© Siemens AG 2011
AppendixOrder No. Index
10/25Siemens FI 01 · 2011 US Edition
10
PBD-25500K05A 5/202PBD-25500K07A 5/202PBD-25501K0100A 5/202PBD-25501K0150A 5/202PBD-25501K0200A 5/202PBD-25501K0250A 5/202PBD-25501K0500A 5/202PBD-25501K1000A 5/202PBD-51002K0100AAA 5/202PBD-51003K020AAAA 5/202PBD-51004K1AAA 5/202PBD-51005K1AAA 5/202PBD-51006K020AACA 5/202PBD-51006K020AADA 5/202PBD-51010K1AA 5/202PBD-51010K1AB 5/202PBD-51010K2AA 5/202PBD-51010K2AB 5/202PBD-51010K3AA 5/202PBD-51010K3AB 5/202PBD-51014K0100AAA 5/203PBD-51014K0150AAA 5/203PBD-51014K0200AAA 5/203PBD-51014K0250AAA 5/203PBD-51034039 5/143PBD-51034040 5/143PBD-51034042 5/143PBD-51034043 5/143PBD-51034044 5/143PBD-51034045 5/143PBD-51034046 5/143PBD-51034047 5/143PBD-51034048 5/143PBD-51034272 5/143PBD-51035410 5/220PBD-51035473 5/220PBD-51035474 5/220PBD-51035810 5/220PBD-51035811 5/220PBD-51035812 5/220PBD-51035813 5/220PBD-51035814 5/220PBD-51035815 5/220PBD-51035816 5/220PBD-51035867 5/220PBD-51035871 5/220PBD-51035873 5/220PBD-51036065 5/203PBD-51036110 5/220PBD-51036180 5/220PBD-51036479 5/220PBD-51036480 5/220PBD-51036481 5/220PBD-51036482 5/220PBD-51036483 5/220PBD-51036484 5/220PBD-51036485 5/220PBD-51036486 5/220TGX:...TGX:001STCAB 4/35TGX:001SPCAB 4/35TGX:001F0005 4/87TGX:001F0010 4/87
PageTGX:001F0015 4/87TGX:001F0020 4/87TGX:001F0025 4/87TGX:001F0030 4/87TGX:001F0040 4/87TGX:001F0050 4/87TGX:001F0060 4/87TGX:001F0080 4/87TGX:001F0100 4/87TGX:001F0120 4/87TGX:002F0005 4/88TGX:002F0010 4/88TGX:002F0015 4/88TGX:002F0020 4/88TGX:002F0025 4/88TGX:002F0030 4/88TGX:002F0040 4/88TGX:002F0050 4/88TGX:002F0060 4/88TGX:002F0080 4/88TGX:002F0100 4/88TGX:002F0120 4/88TGX:003F0005 4/88TGX:003F0010 4/88TGX:003F0015 4/88TGX:003F0020 4/88TGX:003F0025 4/88TGX:003F0030 4/88TGX:003F0040 4/88TGX:16152-105 6/32TGX:16152-110 6/33TGX:16152-117 6/33TGX:16152-328 6/33TGX:16152-336 6/33TGX:16152-348 6/33TGX:16152-350 6/33TGX:16152-364 6/33TGX:16152-927 6/10TGX:16152-937 6/10TGX:16152-947 6/10TGX:16152-967 6/10TGX:16300-147 6/32TGX:16300-149 6/32TGX:16300-151 6/32TGX:16300-1556 6/32TGX:16347-100 4/256TGX:16347-101 4/256TGX:16347-111 4/256TGX:16347-120 4/256TGX:16347-121 4/256TGX:16347-122 4/256TGX:16347-123 4/256TGX:16347-124 4/256TGX:16347-125 4/256TGX:16347-127 4/256TGX:16347-134 4/256TGX:16347-135 4/256TGX:16347-137 4/256TGX:16347-165 4/256TGX:16347-166 4/256TGX:16347-168 4/256TGX:16347-170 4/256TGX:16347-174 4/256
PageTGX:16347-175 4/256TGX:16347-177 4/256TGX:16347-212K 4/256TGX:16347-213K 4/256TGX:16347-214K 4/256TGX:16347-215K 4/256TGX:16347-216K 4/256TGX:16347-217K 4/256TGX:16347-218K 4/256TGX:16347-219K 4/256TGX:16347-220K 4/256TGX:16347-221K 4/256TGX:16347-222K 4/256TGX:16347-223K 4/256TGX:16347-224K 4/256TGX:16347-225K 4/256TGX:16347-226K 4/256TGX:16347-235 4/256TGX:16347-236 4/256TGX:16347-237 4/256TGX:16347-238 4/256TGX:16347-80 4/256TGX:16347-81 4/256TGX:16347-82 4/256TGX:16347-83 4/256TGX:16347-84 4/256TGX:16347-85 4/256TGX:16347-86 4/256TGX:16347-89 4/256TGX:16347-90 4/256TGX:16347-91 4/256TGX:16347-92 4/256TGX:16347-93 4/256TGX:16347-94 4/256TGX:16347-95 4/256TGX:16347-96 4/256TGX:16347-97 4/256TGX:16347-98 4/256
Page
FI01_2011_Kap10_en.book Seite 25 Mittwoch, 2. Februar 2011 6:16 18
© Siemens AG 2011
AppendixNotes
10/26 Siemens FI 01 · 2011 US Edition
10
FI01_2011_Kap10_en.book Seite 26 Mittwoch, 2. Februar 2011 6:16 18
© Siemens AG 2011
AppendixNotes
10/27Siemens FI 01 · 2011 US Edition
10
FI01_2011_Kap10_en.book Seite 27 Mittwoch, 2. Februar 2011 6:16 18
© Siemens AG 2011
AppendixConditions of sale and delivery, Export regulations
10/28 Siemens FI 01 · 2011 US Edition
10
■ Terms and Conditions of Sale and Delivery
By using this catalog you can acquire hardware and software products described therein from Siemens AG subject to the fol-lowing terms. Please note! The scope, the quality and the condi-tions for supplies and services, including software products, by any Siemens entity having a registered office outside of Ger-many, shall be subject exclusively to the General Terms and Conditions of the respective Siemens entity. The following terms apply exclusively for orders placed with Siemens AG.
For customers with a seat or registered office in GermanyThe “General Terms of Payment” as well as the “General Condi-tions for the Supply of Products and Services of the Electrical and Electronics Industry” shall apply.For software products, the “General License Conditions for Soft-ware Products for Automation and Drives for Customers with a Seat or registered Office in Germany” shall apply.
For customers with a seat or registered office outside of GermanyThe “General Terms of Payment” as well as the “General Condi-tions for Supplies of Siemens, Automation and Drives for Cus-tomers with a Seat or registered Office outside of Germany” shall apply.For software products, the “General License Conditions for Soft-ware Products for Automation and Drives for Customers with a Seat or registered Office outside of Germany” shall apply.
GeneralThe dimensions are in mm. In Germany, according to the Ger-man law on units in measuring technology, data in inches only apply to devices for export. Illustrations are not binding.Insofar as there are no remarks on the corresponding pages, - especially with regard to data, dimensions and weights given - these are subject to change without prior notice.The prices are in € (Euro) ex works, exclusive packaging.The sales tax (value added tax) is not included in the prices. It shall be debited separately at the respective rate according to the applicable legal regulations.Prices are subject to change without prior notice. We will debit the prices valid at the time of delivery.Surcharges will be added to the prices of products that contain silver, copper, aluminum, lead and/or gold if the respective basic official prices for these metals are exceeded. These surcharges will be determined based on the official price and the metal fac-tor of the respective product.The surcharge will be calculated on the basis of the official price on the day prior to receipt of the order or prior to the release order.The metal factor determines the official price as of which the metal surcharges are charged and the calculation method used. The metal factor, provided it is relevant, is included with the price information of the respective products.
An exact explanation of the metal factor and the text of the Comprehensive Terms and Conditions of Sale and Delivery are available free of charge from your local Siemens business office under the following Order Nos.:• 6ZB5310-0KR30-0BA1
(for customers based in Germany)• 6ZB5310-0KS53-0BA1
(for customers based outside Germany)or download them from the Internetwww.siemens.com/industrymall (Germany: Industry Mall Online-Help System)
■
■ Export regulations
Our obligation to fulfill this agreement is subject to the proviso that the fulfillment is not prevented by any impediments arising out of national and international foreign trade and customs requirements or any embargos and/or other sanctions.If you transfer goods (hardware and/ or software and/ or tech-nology as well as corresponding documentation, regardless of the mode of provision) delivered by us or works and services (including all kinds of technical support) performed by us to a third party worldwide, you shall comply with all applicable national and international (re-) export control regulations. If required to conduct export control checks, you, upon request by us, shall promptly provide us with all information pertaining to particular end customer, destination and intended use of goods, works and services provided by us, as well as any export control restrictions existing.The products listed in this catalog / price list may be subject to European / German and/or US export regulations.Therefore, any export requiring a license is subject to approval by the competent authorities.According to current provisions, the following export regulations must be observed with respect to the products featured in this catalog / price list:
Even without a label or with an “AL: N” or “ECCN: N”, authoriza-tion may be required due to the final destination and purpose for which the goods are to be used. The deciding factors are the AL or ECCN export authorization indicated on order confirmations, delivery notes and invoices.Errors excepted and subject to change without prior notice.
AL Number of the German Export ListProducts marked other than “N” require an export license. In the case of software products, the export des-ignations of the relevant data medium must also be generally adhered to.Goods labeled with an “AL“ not equal to “N” are subject to a European or German export authori-zation when being exported out of the EU.
ECCN Export Control Classification NumberProducts marked other than “N” are subject to a reexport license to specific countries.In the case of software products, the exportdesignations of the relevant data medium must also be generally adhered to.Goods labeled with an “ECCN“ not equal to “N” are subject to a US re-export authorization.
FI01_2011_Kap10_en.book Seite 28 Mittwoch, 2. Februar 2011 6:16 18
© Siemens AG 2011