fgd surface decoration

8/4/2019 Fgd Surface Decoration

1/10

surface decorationrevised 07/07

creative solutions in glass


2/10

www.fusionglass.co.uk1

Ilac Centre - Dublin, Ireland


3/10

www.fusionglass.co.uk 2

surface decoration

Surface decoration involves the more traditional forms of glass

decoration; sandblasting, acid etching, gilding and screen-

printing. Sandblasting is the most versatile form of etching

glass and a process in which Fusion Glass Designs excels.

Effects range from simple frosting, which can incorporate

etched logos, patterns and graphics to more complex deep

carved, three-dimensional work. Subtle effects can be

achieved using hard and soft lines, semi-tones, layering and a

variety of textures.Fusion has designed and created a wide

range of commissions.

production capabilities

Using our extensive sandblasting facilities fusion can work on

large production runs as well as complex commissions.

Panels can be produced in any size up to 3m x 5m (118" x

198") and in any thickness. We can sandblast all types ofglass: flat sheet, curved annealed, toughened tempered,

laminate, colour coated and kiln formed. From highly

decorative carved work to standard textures and finishes.

process

Frosting, surface etching, semi tones, depth work and 3d

carving

Text, logos, graphics, patterns and textures

Transparent or opaque colours available

Sandblasting can be combined with laminating kiln forming

colour coating and gilding to further expand the creative

possibilities of this technique.

Private Client

Odeon Cinema, London UK

Grosvenor Hotel, London UK


4/10


technical data

Maximum sizes up to 5000mm x 3000mm

118" x 198".

Available as annealed laminates and

toughened / tempered laminates.

Available thickness:

4, 6, 8, 10, 12, 15, 19, 25mm

5/32, 1/4, 5/16, 3/8, 1/2, 5/8, 3/4, 1

or a combination of thicknesses through

laminating.

Frosting, semi-tones, depth work and 3D

carving available.

Text, logos, designs, patterns and textures

Transparent or opaque colours available,

colour infills, gilding.

Sandblasting can be combined with

laminating, kiln forming and gilding to further

expand the possibilities.

sandblast with gilded inlay

detailed etched graphics

signage and graphics


5/10


SS11SS10SS 9

flat tone half tone SS16SS13 SS14 SS15 flat tone mirror photo stencil

deep bromish deep mottled mottled & etched mottledSS12

SS7SS 6SS5 clear text carved text & etch carved text etched text on mirror SS8

SS3SS 2SS1 deep carved carved pattern carved abstract tonal layersSS4

Sandblast samples (100 x 100mm)

Our standard range of sandblast samples demonstrates the various techniques available.

These can be applied to any number of designs, graphics and patterns.

standard sample range


6/10


Top: Durham Cathedral, Durham UK

Middle: Pizza Express, London UK

Bottom: SU214, London UK

Top: State St Bank, London UK

Middle: Moore Stephens, London UK

Bottom: Belgrave House, London UK


7/10


Top: Ilac Centre, Dublin Ireland

Middle: Lloyds TSB, Birmingham UK

Bottom: Stakis Metropole, London UK

Top: Grosvenor Hotel, London UK

Middle: Ergonom, London UK

Bottom: Gordon Ramsay, London UK


8/10

applications

cladding

partitions

features

screens

balustrades

flooring

counters

glass

Glass used in the surface decoration process is manufactured

using standard clear float glass, however it is also available in

specialist glasses including low iron (crystal clear) and a

variety of body tints; blue, green, bronze and grey.

available thickness

Standard 6,8,10,12,15,19,25mm (1/4, 5/16,3/8,1/2,5/8,3/4,1")

or combination of thickness through laminating

Glass can be toughened / tempered or laminated to required

national & international safety standards.

Tailor-made to clients' requirements, including curved to

radius, cut to complex shapes and drilled or countersunk.

Polymer protection: For most applications we protect

sandblasted glass with a polymer coating, applied to seal and

protect the surface. Polymer is applied to the porous sandblast

surface and bonded at a molecular level to form a protective

barrier against dirt and scuff marks. Where the glass becomes

dirty it can easily be cleaned with soft cloth and warm water.


furniture

signage

displays

faades

sculptures

commissions

Deep carved Islamic design, back painted

Ilac Centre, Dublin Ireland

Edinburgh Museum, Edinburgh UK


9/10


artwork for surface decoration

In order to sandblast a design onto glass we use a variety ofstencils ranging from computer or hand cut vinyl to screen

printed and photographic stencils, depending on the detail

required. This in turn will dictate the format of the artwork

required. We can design or generate artwork to client's

specifications; alternatively the client or designer can supply

artwork.

ideal file format

A vector graphic is the most suitable type of artwork, such as an

Adobe Illustrator or Macromedia Freehand file, at 1:1 scale if

possible. Sign lab files are also acceptable, provided that they

are version 7 or earlier. When sending artwork please ensure

that all fonts are converted to vector outlines, and that any

compound paths or clipping masks have been applied and

expanded where necessary.

In the event that you cannot supply us with a vector graphic,

bitmap files are acceptable, however you must allow a

reasonable period of time for the artwork to be translated into

vector format.

proofs

We recommend that you supply a printed proof of your artwork

in order for us to see how your intended design should look.

recommended file formats for electronic data

Photoshop 7(Mac/PC) PSD, EPS, TIFF

Illustrator 10(Mac/PC) Al, EPS (All graphics as outlines)

Freehand MX(Mac/PC) FHD, EPS (All graphics as outlines)AutoCAD 2007(PC only) DWG, DXF

Signlab version 7 (PC only)

accepted file media

CD-ROM (Mac/PC)

DVD-ROM (Mac/PC)

Removable device (Flash drive)

Email (Up to 10mb)

Online file storage / ftp site


10/10

365 CLAPHAM ROAD, LONDON SW9 9BT

T +44(0)20 7738 5888 www.fus ionglass .co.uk

fgd surface decoration

Documents