Ferrari North America

Technical Information

© 2016 Ferrari North America, Inc. Technical Department www.ferrariusa.com

All rights reserved. Reproduction or translation in whole or in part is not permitted without authorization from the publisher. Printed in USA

Date: June 2016 Bulletin #: 2335 Campaign #: Supersedes: Section: 10

Model Type: 488 GTB, 488 Spider, LaFerrari, FXX-K Model Year: All Subject: Protective vehicle covers

Please note that Ferrari S.p.A recommends using the commercially available products indicated as follows to protect vehicles in the workshop.

Protective covers are available for the 488 GTB, 488 Spider, LaFerrari and FXX K.

488 GTB / 488 Spider

All covers are manufactured from highly resilient quilted red PVC and include a resilient anti-slip inner lining, mesh ventilation apertures for the lights and engine, and Velcro fasteners. Each cover is tailored specifically for the forms of the individual model. The covers indicated below are contained in a red canvas bag.

Personalized kit consisting of:

- Center tunnel console cover (Fig. 1);

- Front fender covers and front cover (set of 3 elements) (Fig. 2)

- Rear fender covers and rear cover (set of 3 elements) (Fig. 3 and 4)

Note: the aforementioned covers are also available individually.

Fig. 1 Fig. 2

Ferrari North America

2 TI-2335

All rights reserved. Reproduction or translation in whole or in part is not permitted without authorization from the publisher. Printed in USA

© 2016 Ferrari North America, Inc. Technical Department www.ferrariusa.com

LaFerrari / FXX K

All covers are manufactured from highly resilient quilted red PVC and include a resilient anti-slip inner lining, mesh ventilation apertures for the lights and engine, and Velcro fasteners. Each cover is tailored specifically for the forms of the individual model. The covers indicated below are contained in a red canvas bag.

Personalized kit consisting of:

- Rear cover (Fig. 5);

- Front fender and front bumper cover (set of 2 elements) (Fig. 6);

- Luggage compartment lid cover (Fig. 6);

- Door covers (set of 2 elements) (Fig. 7);

- Air filter box covers (set of 2 elements) (Fig. 8);

- Intake manifold cover (Fig. 9);

Note: the aforementioned covers are also available individually.

Fig. 4 Fig. 3

Ferrari North America

3 TI-2335

All rights reserved. Reproduction or translation in whole or in part is not permitted without authorization from the publisher. Printed in USA

© 2016 Ferrari North America, Inc. Technical Department www.ferrariusa.com

Fig. 6

Fig. 5

Fig. 7 Fig. 8

Fig. 9

Ferrari North America

4 TI-2335

All rights reserved. Reproduction or translation in whole or in part is not permitted without authorization from the publisher. Printed in USA

© 2016 Ferrari North America, Inc. Technical Department www.ferrariusa.com

Tailored covers are also available for the following Ferrari models: California, FF, F12berlinetta, 458 Italia, 458 Spider, 599 GTB Fiorano and GTO. See the website of the supplier, indicated as follows, for any further information.

Please address any questions and orders directly to the supplier:

AUTOPRODUCTS Lon Parcwr Industrial Estate, Ruthin, Denbighshire. LL15 1NJ. UK Phone: 0044 (0) 1824 707555 Fax: 0044 (0) 1824 707560 E-mail: sales@autoproducts.co.uk Website: www.autoproducts.co.uk

Thank you for your co-operation.