fasteners & fittings - fasteners... · drop-in anchors have an internal thread for use with metric...

DIVIDER INSERT hERE:

fasteners & fittings

fasteners & fittings

fasteners &

fitting

s

139Online catalogue: www.anzor.co.nz/arch

ANzOR BOSLOKSTAINLESS STEEL DOWN PIPE WALL CLAMPS

BENEFITS

NZ designed and manufactured

Easy installation - only hand tools required

Very flush, sleek finish for all applications

Available in 304 (ex-stock) or 316 (to order) stainless steel.

Product code: TFCB.

Mounting Brackets

Heavy Wall Plates

Boslok Bracket Strap + Boslok Nuts

Threaded Inserts

Small Nuts - M6Large Nuts - M10 or M12

Small Bracket StrapSizes: 3/8 (10mm OD) - 1 (25mm OD) Strap size 0.7x16mm Large Bracket StrapSizes: 1 (25mm OD) - 6(152mm OD) Strap size 0.7x16mm

OpTION 1 - pLAIN ShANK FOR A cLEAN, MODERN LOOK.

55x90mm diamond shapeLong - 200mm offsetShort - 120mm offsetTool required for installation.Lengths can be trimmed on site with a hacksaw.

Threaded stud

*Alternative option to mounting brackets for fixing wall plate to Boslok strap/nut

ANzOR BOSLOK

+

OpTION 2 - ThREADED ShANK FOR FLEXIBLE ShANK LENGTh

+ +

+

Boslok Bracket Strap + Boslok Nuts

Small Bracket StrapSizes: 3/8 (10mmOD) - 1 (25mmOD) Strap size 0.7x16mm Large Bracket StrapSizes: 1 (25mmOD) - 6(152mmOD) Strap size 0.7x16mm

Small - 50x30mm Large - 55x90mmOther shapes/sizes can be made on request.

Online catalogue: www.anzor.co.nz/boslok

EX-STOcK SUBJEcT TO pRIOR SALE


LAGScREWS - 304 SS

cSK cOAchScREWS - SOcKET DRIVE - 316 SS

code Size

SSHCKW610100 M10 x 100

SSHCKW610120 M10 x 120

SSHCKW610140 M10 x 140

codeSize

( x L) LM

(mm)Lh

(mm)Drive (SW)

(mm)LSM404070 M4 x 70 30 40 None

LSM405080 M5 x 80 32 43 None

LSM406090 M6 x 90 36 50 None

LSM408050 M8 x 50 20 27 None

LSM408080 M8 x 80 32 35 Hex

LSM408100 M8 x 100 37 45 Hex

LSM408130 M8 x 130 40 45 Flat

LSM410080 M10 x 80 20 50 Hex

LSM410100 M10 x 100 32 55 Hex

LSM410140 M10 x 140 50 80 Hex

LSM410150 M10 x 150 48 65 Hex

FASTENERS FOR TIMBER

We carry a wide range of high quality 304 Stainless Steel Lagscrews.

Perfect for securing objects with high sideways loading onto timber. Larger diameter therefore greater shear strength than smaller woodscrews.

FASTENERS FOR TIMBER

Online catalogue: www.anzor.co.nz

The complete chemical anchoring range has finally arrived.

141Online catalogue www.anzor.co.nz

FASTENERS FOR cONcRETE

Anzor offers an extensive range of options for fastening to concrete.

Studs for Chemical Anchors

Chemical Anchor Cartridges

Drop-In Anchors

Sleeve Anchors

Wedge Anchors

Flush Head Anchors

Mushroom Spikes

Screw Bolts



chEMIcAL ANchORS WITh ThREADED STUDS

Hole drilled into concrete

Fischer chemical anchor injected.

FEATURES

No expansion force in base material unlike sleeve anchors.

Greater working load in tension than expandable anchors.

Studs for chemical anchors available in M8, M10, M12, M16 & M20.

One or more of these could be attached to a Threaded Stud.

Round Washer hex Nut S3061 Eye Nut

Dome NutSquare Washer

ATTAchMENT OpTIONS

Recommended Load* Features

Styrene free, low odour For use with a commonly

available caulking gun. Leak proof cartridge for

clean and safe handling. Curing time of 60

minutes at 20 C.

High performance, Styrene free, low odour.

For use with a commonly available caulking gun.

Leak proof cartridge for clean and safe handling.

Curing time of 60 minutes at 20 C.



Curing time of 45 minutes at 20 C.



Curing time of 10 hours at 20 C.

NrecM12=8.6kN

NrecM12=14.8kN

NrecM12=14.8kN

NrecM12=17.3kN

POLYESTER (300 mL)(Code: FIS P 300 T)

VINYLESTER (300 mL)(Code: FIS VS 300 T)

VINYLESTER (360 mL)(Code: FIS V 360 S)

EPOXY (390 mL)Code: FIS EM 390 S)

* 20MPa concrete at 110mm (M12, grade 5.8 studs) embedment

Type

POLYESTER

Cheapest resin available

Poorest adhesion

VINYLESTER

More cost effective than epoxy resins

Moderate adhesion

VINYLESTER

More cost effective than epoxy resins

Moderate adhesion

EPOXY

Incredible toughness and bonding strength

FASTENINGS TO cONcRETE



DROp-IN ANchOR - 316 SSDrop-In Anchors have an internal thread for use with metric threaded fasteners (e.g. Hex Bolts) or Threaded Rod (stud). The anchor is placed into a pre-drilled hole in the concrete. A Setting Tool is then used to expand the anchor within the hole.

FEATURES Fast and easy installation.

Fasteners can be removed and replaced.

A Setting Tool is required for installation

Example of a Drop-In anchor application

code Thread SizeAnchor Diameter

(mm)Thread Depth

(mm)Anchor Length

(mm)pull Out Load

(kN)Safe Working

Load (kN)

DYDIM606 M6 8 10 25 9.32 2.32

DYDIM608 M8 10 14 30 13.24 3.30

DYDIM610 M10 12 15 40 19.12 4.78

DYDIM612 M12 16 20 50 28.44 7.11

DYDIM616 M16 20 25 65 47.56 11.89

The test values above were obtained using 20 MPa non aggregated concrete.

cOMMON FASTENERS USED WITh DROp-IN ANchORS

Threaded Stud

hex Setscrew

S3061 Eye Nut countersunk Socket Screw

S3191 Eye Bolt S307 Eye Bolt Button Socket Screw

Drop-In Anchor performance Data




S306 EyE BOLT - 316 SS

S3061 EyE NUT - 316 SS

Safe Working Load = 25% of Breaking Load


TEchNIcAL DATA FOR FASTENERS cOMMONLyUSED WITh DROp-IN ANchORS


codeSize d mm

a mm

bmm

cmm

Dmm

tmm

hmm

hmm

Breaking Load(kgs)

MFEBM606010 6 26 16 5 13 9 31 19 1100

MFEBM608012 8 33 20 6 16 12 40 23 1800

MFEBM610015 10 41 25 8 20 15 49 28 2600

MFEBM612020 12 50 30 10 25 19 61 36 3500

MFEBM616023 16 60 35 13 30 23 72 42 8000

codeSize d mm

a mm

bmm

cmm

Dmm

tmm

hmm

hmm

Breaking Load(kgs)

MFENM606 6 26 16 5 13 4 28.3 13 1,100

MFENM608 8 33 20 6 16 5 33.3 17 1,300

MFENM620 10 41 25 8 20 7 41.5 21 10,500

MFENM612 12 50 30 10 25 9 51 26 3,500

MFENM616 16 60 35 13 30 11 60 30 8,000

MFENM620 20 72 40 16 35 13 71 35 10,500





code Size mm

Overall Length

mm

Dia. of holemm

Thread Length

mm

MFEBM606040S M6 x 40 48 6 23.2

codeSize mm D1 x A

B mm

cmm

Dmm

Breaking Load(kgs)

S307-06060 6 x 60 54 5 12 1100S307-06080 6 x 80 70 5 12 1100S307-08080 8 x 80 70 6 14 1100S307-08100 8 x 100 90 6 14 1300S307-10100 10 x 100 88 8 16 2600S307-12100 12 x 100 100 10 30 3500S307-12120 12 x 120 105 10 30 3500


codeSize mm

AxL1B

mmL

mmL2

mmBreaking Load

(kgs)MFEBM406040 6 x 40 13 34 60 1000MFEBM406060 6 x 60 13 54 85 1000MFEBM406080 6 x 80 13 75 105 1000MFEBM406100 6 x 100 13 95 125 1000MFEBM408060 8 x 60 17 50 90 1800MFEBM408080 8 x 80 17 72 110 1800MFEBM4080100 8 x 100 17 90 130 1800MFEBM4080130 8 x 130 17 120 160 1800MFEBM410080 10 x 80 21 70 120 2400MFEBM4100100 10 x 100 21 90 140 2400MFEBM4100120 10 x 120 21 110 160 2400MFEBM4100150 10 x 150 21 140 190 2400MFEBM412100 12 x 100 25 85 150 3500MFEBM412120 12 x 120 25 110 170 3500MFEBM412150 12 x 150 25 140 200 3500






hEX NUT SLEEVE ANchOR - 316 SS

S3061 Eye Nut

Attachment Options

countersunk Skt Barrel Nut

FLUSh hEAD SLEEVE ANchOR - 316 SS

code Size hole Size Fastens Material to (mm)

pull Out Load (kN)

Safe Working Load (kN)

DYM606.5040 6.5x40 M5 12 7.85 1.96

DYM606.5060 6.5x60 M5 32 7.85 1.96

DYM608040 8x40 M6 12 11.77 2.94

DYM608065 8x65 M6 36 11.77 2.94

DYM610040 10x40 M8 10 16.67 4.17

DYM610050 10x50 M8 16 16.67 4.17

DYM610075 10x75 M8 40 16.67 4.17

DYM610100 10x100 M8 65 16.67 4.17

DYM612060 12x60 M10 20 24.52 6.13

DYM612075 12x75 M10 32 24.52 6.13

DYM612100 12x100 M10 56 24.52 6.13


code Size hole SizeFastens Material up

to (mm)pull Out Load

(kN)Safe Working Load

(kN)

DYFHM608070 8x70 M6 30 11.77 2.94

DYFHM610040 10x40 M8 10 16.67 4.17

DYFHM610060 10x60 M8 15 16.67 4.17

DYFHM610080 10x80 M8 35 16.67 4.17

DYFHM610095 10x95 M8 50 16.67 4.17

DYFHM612075 12x75 M10 20 24.52 6.13


Can swap Hex Setscrew for a Button or Csk Socket Screw or a M6 Joint Connector Bolt as a low profile option.


countersunk Socket Screw Button Socket Screw

Alternative head Options

M6 Joint connector Bolt



WEDGE ANchOR - 316 SS

S3061 Eye Nutcountersunk Skt Barrel Nut

A Wedge Anchor is a true dimension, stud type expansion anchor - its stud diameter is the same as the hole diameter.

code SizeMin. Embedment

(mm)Fastens Material

up to (mm)pull Out Load

(kN)Safe Working Load

(kN)

DYTM610075 M10x75 50 20 14.71 3.68

DYTM612080 M12x80 50 20 22.56 5.64

DYTM612100 M12x100 60 30 22.56 5.64

DYTM612120 M12x120 60 50 22.56 5.64

DYTM612140 M12x140 60 65 22.56 5.64

DYTM616100 M16x100 70 15 33.34 8.34

DYTM616140 M16x140 80 40 33.34 8.34

DYTM616175 M16x175 80 80 33.34 8.34

DYTM620120 M20x120 85 15 52.96 13.24

DYTM620160 M20x160 100 40 52.96 13.24

ATTAchMENT OpTIONS


cAST-IN ANchOR

ScREW BOLT - GALV

FEATURES Suitable for brick/concrete/blocks Removable and reusable. Vibration resistant. M10 x 140mm (Product Code: DYBSG10140BT)

other sizes available on request.

Can be installed within 3x diameter - minimum edge distance.

- Approved for 15kN bottom plate bracing, the Blue Tip Galv Screw Bolt gives immediate high strength loading with a shallow embedment.

Cast into concrete tilt slab panels to provide internal threads in the panel.

Made to order (2 week delivery)

Product code: DYDCM6.......

FEATURES




hEX WAShER FAcE cONcRETE BOLT - 316 SS

FEATURES 316 Stainless Steel (tips are carbide steel). Removable and reusable. Can be installed within 3 x diameter

minimum edge distance. Available in M8 x 80 (DYCB6H08080)

& M10 x 100 (DYCB6H10100).

The Hex Washer Face Concrete Bolt gives immediate high strength loading and is ideal for close-to-edge installation as it can be installed within 3x diameter to edge of concrete.

cSK cONcRETE BOLT - 316 SS

FEATURES 316 Stainless Steel (tips are carbide steel). Removable and reusable. Can be installed within 3 x diameter

minimum edge distance. Allen Key drive. Available in M8 x 80 (DYCB6C08080).

The Csk Concrete Bolt gives immediate high strength loading and is ideal for close-to-edge installation as it can be installed within 3x diameter to edge of concrete.

MUShROOM hEAD SpIKE - 316 SS

FEATURES 316 Stainless Steel (tips are carbide steel). Easy installation. Available in 5mm (DYSM605)

& 6.5mm (DYSM606.5).

Easily driven into drilled concrete. NB: Mushroom Head Spike requires the head to be sheared off to remove from attached material.




FISchER SXS MASONRy ScREW + SLEEVE

FEATURES

The first plastic plug with European Technical Approval for single point fixings in the cracked concrete tensile zone. Available in 316 Stainless Steel, with countersunk and hex washer face options for timber and metal applications.

pERFORMANcEpermissible loadConcrete B15 : 1.6 kN at 50 mm anchor depth.

perfect in interaction: the cO-NA-screw and the SXS-sleeve.

Safety zone 2: the re-expansion area

When a crack appears in the concrete the re-expansion zone with its extra strong shaped cones provides the active re-expansion of the fischer SXS.

Safety due to 3-zone screw: the cO-NA-screw.

Safety zone 1: the expansion area

By means of the innovative geometry of the thread with distinctive cones the expansion force increases depending on the external loads.

Safety zone 3: the shaft

The maximum screw diameter of the CO-NA-screw is situated exactly in the position of the bearing point. The cross section is about 20 % higher compared with the safety screw with 7 mm.

Doesnt spin round

This feature prevents spinning of the sleeve during installation. While re-expanding it fixes the sleeve in its position.

high pressure in 4 directions

The optimal allocation of the expansion forces to the surface of the bore hole is ensured by the expansion in 4 directions. By this in the cracked tension zone permissible loads up to 1,7 kN axial load have been reached. The permissible shear load amounts up to 3,0 kN. This means a maximum of safety even in an appearing crack.

high flexibility for installation

The CO-NA-screw fits for each application.It is available with counter sunk head and

hexagon head with washer included.

permissible bending moment:316 Stainless Steel (A4): 15.3 Nm

Fischer SXS CSK - Product Code: FSCM6....

Fischer SXS HWF - Product Code: FSHM6....


Online catalogue: www.anzor.co.nz/fischer

150Online catalogue: www.anzor.co.nz/fischer

Suitable substrate materials: Concrete, aircrete, solid sand-lime brick, solid brick, solid clinker, solid pumice brick, hollow pumice blocks, plasterboard, natural stone.

For wooden structures: Fischer SXS-T with Fischer CO-NA countersunk-head screw.Attachment of: square beams, wooden laths, strips, faades and wooden roof constructions.

For metal constructions: Fischer SXS-F US with flat fixing edge and Fischer CO-NA screw with hexagon head and integral washer.For fastening: metal and plastic profiles, door and window frames, insulants, sheet metal, panelling, etc.

CSk TORx SxS FISCHER SCREW

AREAS OF AppLIcATION FOR ThE FISchER SXS ScREW

Size Drill-x Min. drill hole depth

Effect. anchor-age depth

Anchor length

Max. usable length

fischerCO-NA-screws

[mm] [mm] [mm] [mm] [mm] [mm]

M10 x 80 10 90 50 80 30 7 x 87M10 x 100 10 110 50 100 50 7 x 107M10 x 120 10 130 50 120 70 7 x 127M10 x 140 10 150 50 140 90 7 x 147M10 x 160 10 170 50 160 110 7 x 167M10 x 180 10 190 50 180 130 7 x 187M10 x 200 10 210 50 200 150 7 x 207M10 x 230 10 240 50 230 180 7 x 237M10 x 260 10 270 50 260 210 7 x 267

HWF TORx SxS FISCHER SCREW

Size Drill-x Min. drill hole depth

Effect. anchor-age depth

Anchor length

Max. usable length

fischerCO-NA-screws

[mm] [mm] [mm] [mm] [mm] [mm]

M10 x 60T 10 70 50 60 10 7 x 69M10 x 80T 10 90 50 80 30 7 x 89M10 x 100T 10 110 50 100 50 7 x 109M10 x 120T 10 130 50 120 70 7 x 129M10 x 140T 10 150 50 140 90 7 x 149M10 x 160T 10 170 50 160 110 7 x 169M10 x 180T 10 190 50 180 130 7 x 189M10 x 200H 10 210 50 200 150 7 x 207M10 x 230H 10 240 50 230 180 7 x 237M10 x 260H 10 270 50 260 210 7 x 267

T = Hex Washer Face torx, H = Hexagon-Head Screw.

SXS TEchNIcAL DATA



TEchNIcAL DATA - LOADS

Mean ultimate loads, design resistant and recommended loads for single anchors of Fischer Long-shaft SXS with large axial spacing and edge distance.Anzor only carries in stock - 316 Stainless Steel.

Anchor SizeMaterial Non-cracked concrete cracked concrete

SXS 10 SXS 10

Temperature range: short-term/long-term C 30 / 50 50 / 80 30 / 50 50 / 80

Effective anchorage depth heff (mm) 35 35

Nominate acnchorage depth hnom (mm) 50 50

Drill hole depth h1 > (mm) 60 60

Drill hole diameter d0 (mm) 10 10

Mean ultimate loads Nu (kN)

Tensile

Nu (kN) gvz 12.8 8.3 10.4 6.7

Nu (kN) fvz 6.4 4.2 - -

Nu (kN) 316 12.8 8.3 10.4 6.7

Shear

Vu (kN) gvz 13.8 11.7 13.8 11.7

Vu (kN) fvz 6.9 5.9 - -

Vu (kN) 316 13.8 11.7 13.8 11.7

Design resistant loads NRd (kN)

Tensile

NRd (kN) gvz 3.3 2.2 2.8 1.7

NRd (kN) fvz 1.7 1.1 - -

NRd (kN) 316 3.3 2.2 2.8 1.7

Shear

VRd (kN) gvz 5.0 4.2 5.0 4.2

VRd (kN) fvz 2.5 2.1 - -

VRd (kN) 316 5.0 4.2 5.0 4.2

Recommended loads Nrec (kN)

Tensile

Nrec (kN) gvz 2.4 1.6 2.0 1.2

Nrec (kN) fvz 1.2 0.8 - -

Nrec (kN) 316 2.4 1.6 2.0 1.2

Shear

Vrec (kN) gvz 3.6 3.0 3.6 3.0

Vrec (kN) fvz 1.8 1.5 - -

Vrec (kN) 316 3.6 3.0 3.6 3.0

Recommended bending moment Mrec (Nm)

Mrec (Nm) gvz 16.3 16.3

Mrec (Nm) fvz 10.1 -

Mrec (Nm) 316 15.8 15.8

component dimensions, minimum axial spacings and edge distances

Min. structural component thickness 1) hmin (mm) 100 140 100 140

Min. axial spacing 1)smin (mm) 55 50 55 50

for C (mm) 100 100 100 90

Min. edge distance 1)cmin (mm) 60 60 50 50

for S (mm) 250 200 250 200

* steel failure decisive1) For min. axial spacing and min. edge distance the above described loads have to be reduced!All load values apply for concrete C20/25 without edge or spacing influence.Design resistant loads: material safety factor YM is included. Material Safety factor YM depends on type of anchor.Recommended loads: material safety factor YM and safety factor for load YL - 1.4 are included.




Mean ultimate loads and recommended loads of Fischer Long-shaft fixings.

2) The expanding part of the fixing must anchor in the wall of the brick.3) With simultaneous tensile load, the bending moment must be reduced.5) In aerated concrete, the hole should be made using the special punch provided. 6) For hot-dip galvanized safety screws the value has to be reduced by 50%. 9) See product illustration below. 11) And edge distance to non-mortared joints.12) Edge distance to mortared joints only.

Fixing Type SXS 10

Anchorage depth (mm) 50

Drill-hole depth (mm) 60

Drill (mm) 10

Concrete C12/15Nu.m (kN) 12.3 6)

Nrec (kN) 1.6 6)

Solid brick (DIN 105) Mz12Nu.m (kN) 6.5 6)

Nrec (kN) 1.0 6)

Solid sand-lime brick (DIN 105) KS12Nu.m (kN) 12.3 6)

Nrec (kN) 2.0 5)

Hallow block (lightweight concrete, DIN 18151) 2) Hb12 Nu.m (kN) - 11)

Nrec (kN) 0.25

Recommended bending moments 3)zinc plated (Nm) 16.3

316* (Nm) 15.8

Spacings and component dimensions

Fixing Type SXS 10

co

ncr

ete

Single plug 9)Axial spacing a 10 15

Edge spacing ar 8 10

Pair of plugs 9)Axial spacing

ai 5 5

ag 24 30

Edge spacing ar 8 10

Min. component thickness d - 10

Mas

on

ry

Axial spacing a > 10

Edge distancefor loaded masonry 11) ar 10

for non loaded masonry 11) ar 25/3 12)

Min. component thickness d - 11.5

d

a

a

ar

araa

Component dimensions

d

ar

ag

ag

aiai

ai

a) with single plugs b) with a pair of plugs


* Anzor carries in stock - 316 Stainless Steel only.


fasteners & fittings - fasteners... · drop-in anchors have an internal thread for use with metric...

Documents