(p) 800-356-3300 (f) 608-222-5348 www.sanimatic.com 1915 S. Stoughton Rd., Madison, WI 53716

Fast, Thorough, Repeatable Cleaning

F O O D A N D B E V E R A G E

The Sani-Matic Clean-Out-of-Place (COP) washer replaces

unreliable manual cleaning with an efficient, labor-saving system

that generates consistent and repeatable results.

Advantages

• High-Impact Cleaning. High-velocity turbulence is generated

with specially manufactured sanitary jet manifolds, agitating and

cleaning soiled pipes, hoses, and disassembled machine parts.

• Safety. Minimizes operator exposure to high temperatures and

strong concentrations.

• Component Preservation. Reduces component handling and

maintenance.

• Water, Chemical, Utility & Labor Savings. System reduces

labor and utility costs, as well as chemical and water usage.

Sanitary Jet Technology

The Sani-Matic COP comes with our exclusively designed sanitary

jet manifolds that are fully welded and machined to eliminate

unsanitary crevices—and create consistent, high-velocity jet flow.

Angled side jets create circular turbulent flow side to side, while end

jets create turbulent flow lengthwise that is ideal for cleaning pipes

and hoses. Selector valves allow easy jet flow changeover.

Red Flow Angled side jets create flow from side to side

Exclusive Sanitary Jet Design

Sanitary Jet Manifold

Yellow Flow Opposing end jets create flow lengthwise to clean piping

STANDARD

• 304L stainless steel construction

• Sanitary jet manifolds

• In-tank direct steam injection heating

• Sanitary centrifugal supply pump

• Multiple compartments for pre-rinse, wash

and rinse

• Complete documentation to comply with

regulatory standards

Standard sizes include (inner dimensions):

- UW=20” W x 18” D

- RW=24” W x 22” D

- PW=24” W x 30” D

- BW=30” W x 30” D

- SP=Custom dimensions

• 4-,6-,8-,10-, or 12-ft. lengths

OPTIONAL

• 316L stainless steel construction

• End-jet manifold assembly

• Chemical feed equipment

• Conductivity sensor and controller

• Chart recorder

• Motor starter/disconnect

• Power brush assembly

• High-pressure pump and hose station assembly

• Hose-cleaning manifold assembly

• Heavy-duty stainless steel casters

• Drain board and pipe rack assembly

• Hinged sanitary cover assembly

• End-mounted drain table

• In-line electric immersion heater or shell and

tube heat exchanger

• Insulated sidewalls

Applications

Hoses

Pipes

Fittings & Clamps

Features

(p) 800-356-3300 (f) 608-222-5348 www.sanimatic.com 1915 S. Stoughton Rd., Madison, WI 53716FB-COP-0714

Custom and Standard COP Basket Designs

• Reduce handling, as well as damaged and lost parts

• Organize disassembled parts in matched sets

• Customizable handles, dividers, lids, and feet

F O O D A N D B E V E R A G E

URWB-1 URWB-6URWB-2 URWB-5 URWB-7 Custom Basket

Semi-Automated

• PLC controls entire cleaning sequence as batch washer

• HMI provides visual of current cleaning setpoints

• Automated water fill, level and steam control

• Auto chemical addition and conductivity control for proof of rinse

• Shell and tube heat exchanger

• Variety of recording and documentation options

Return and Drain valves are opened

Portable COP/CIP System

• Portable system is ideal for periodic cleaning

of vessels, tanks and lines

• For single compartment once-through use or recirculate solution

with an additional compartment

• A lower capital investment than traditional CIP

Rinse Compartment – CIP Rinse Supply Reservoir

Return valve closed

Rinse Water gravity drains

Drain valve is opened

CIP discharge valve is opened

Detergent Compartment – CIP Wash Supply Reservoir

Solution gravity drains to pump suction for recirculation

CIP discharge valve is opened

COP/CIP Wash Cycle COP/CIP Rinse Cycle