fall 2010 mean as fair share and balance point vmstc november 8, 2010 mean as fair share and balance...

22
Fall 2010 Mean as Fair Share and Mean as Fair Share and Balance Point Balance Point VMSTC VMSTC November 8, 2010 November 8, 2010

Upload: anabel-robertson

Post on 24-Dec-2015

213 views

Category:

Documents


0 download

TRANSCRIPT

Page 1: Fall 2010 Mean as Fair Share and Balance Point VMSTC November 8, 2010 Mean as Fair Share and Balance Point VMSTC November 8, 2010

Fall 2010

Mean as Fair Share and Balance Mean as Fair Share and Balance Point Point

VMSTCVMSTCNovember 8, 2010November 8, 2010

Mean as Fair Share and Balance Mean as Fair Share and Balance Point Point

VMSTCVMSTCNovember 8, 2010November 8, 2010

Page 2: Fall 2010 Mean as Fair Share and Balance Point VMSTC November 8, 2010 Mean as Fair Share and Balance Point VMSTC November 8, 2010

Fall 2010

Mean: Mean: Fair Share and Balance PointFair Share and Balance Point

Mean: Mean: Fair Share and Balance PointFair Share and Balance Point

2

Page 3: Fall 2010 Mean as Fair Share and Balance Point VMSTC November 8, 2010 Mean as Fair Share and Balance Point VMSTC November 8, 2010

Fall 2010

Mean: Fair ShareMean: Fair ShareMean: Fair ShareMean: Fair Share

3

2009 5.16: The student willa) describe mean, median, and mode as measures of center;b) describe mean as fair share;c) find the mean, median, mode, and range of a set of data; andd) describe the range of a set of data as a measure of variation.

Understanding the Standard: “Mean represents a fair share concept of the data. Dividing the data constitutes a fair share. This is done by equally dividing the data points. This should be demonstrated visually and with manipulatives.”

Page 4: Fall 2010 Mean as Fair Share and Balance Point VMSTC November 8, 2010 Mean as Fair Share and Balance Point VMSTC November 8, 2010

Fall 2010

Understanding the MeanUnderstanding the MeanUnderstanding the MeanUnderstanding the Mean

4

Each person at the table should:

1. Grab one handful of snap cubes.2. Count them and write the number

on a sticky note.3. Snap the cubes together to form a

train.

Page 5: Fall 2010 Mean as Fair Share and Balance Point VMSTC November 8, 2010 Mean as Fair Share and Balance Point VMSTC November 8, 2010

Fall 2010

Understanding the MeanUnderstanding the MeanUnderstanding the MeanUnderstanding the Mean

5

Work together at your table to answerthe following question:

If you redistributed all of the cubes from your handfuls so that everyone had the same amount (so that they were “shared fairly”), how many cubes would each person receive?

Page 6: Fall 2010 Mean as Fair Share and Balance Point VMSTC November 8, 2010 Mean as Fair Share and Balance Point VMSTC November 8, 2010

Fall 2010

Understanding the MeanUnderstanding the MeanUnderstanding the MeanUnderstanding the Mean

6

What was your answer?

- How did you handle “leftovers”?

- Add up all of the numbers from the original handfuls and divide the sum by the number of people at the table.

- Did you get the same result?

- What does your answer represent?

Page 7: Fall 2010 Mean as Fair Share and Balance Point VMSTC November 8, 2010 Mean as Fair Share and Balance Point VMSTC November 8, 2010

Fall 2010

Understanding the MeanUnderstanding the MeanUnderstanding the MeanUnderstanding the Mean

7

Take your sticky note and place it on the wall, so they are ordered…

Horizontally: Low to high, left to right; leave one space if there is a missing number.

Vertically: If your number is already on the wall, place your sticky note in the next open space above that number.

Page 8: Fall 2010 Mean as Fair Share and Balance Point VMSTC November 8, 2010 Mean as Fair Share and Balance Point VMSTC November 8, 2010

Fall 2010

Understanding the MeanUnderstanding the MeanUnderstanding the MeanUnderstanding the Mean

8

How did we display our data?

2009 3.17c

Page 9: Fall 2010 Mean as Fair Share and Balance Point VMSTC November 8, 2010 Mean as Fair Share and Balance Point VMSTC November 8, 2010

Fall 2010

Understanding the MeanUnderstanding the MeanUnderstanding the MeanUnderstanding the Mean

9

Looking at our line plot, how can we describe our data set? How can we use our line plot to:

- Find the range?

- Find the mode?

- Find the median?

- Find the mean?

Page 10: Fall 2010 Mean as Fair Share and Balance Point VMSTC November 8, 2010 Mean as Fair Share and Balance Point VMSTC November 8, 2010

Fall 2010

Mean: Balance PointMean: Balance PointMean: Balance PointMean: Balance Point

10

2009 6.15: The student willa) describe mean as balance point; andb) decide which measure of center is appropriate for a given purpose.

Essential Knowledge & Skills: • Identify and draw a number line that demonstrates the concept of mean as balance point for a set of data.

Understanding the Standard: “Mean can be defined as the point on a number line where the data distribution is balanced. This means that the sum of the distances from the mean of allthe points above the mean is equal to the sum of the distances of all the data points below the mean.”

Page 11: Fall 2010 Mean as Fair Share and Balance Point VMSTC November 8, 2010 Mean as Fair Share and Balance Point VMSTC November 8, 2010

Fall 2010

Where is the balance point for this data set?

X

XXX X X

11

Page 12: Fall 2010 Mean as Fair Share and Balance Point VMSTC November 8, 2010 Mean as Fair Share and Balance Point VMSTC November 8, 2010

Fall 2010

Where is the balance point for this data set?

XXXX X

X

12

Page 13: Fall 2010 Mean as Fair Share and Balance Point VMSTC November 8, 2010 Mean as Fair Share and Balance Point VMSTC November 8, 2010

Fall 2010

Where is the balance point for this data set?

X

XXX XX

13

Page 14: Fall 2010 Mean as Fair Share and Balance Point VMSTC November 8, 2010 Mean as Fair Share and Balance Point VMSTC November 8, 2010

Fall 2010

Where is the balance point for this data set?

XXX

XXX

14

Page 15: Fall 2010 Mean as Fair Share and Balance Point VMSTC November 8, 2010 Mean as Fair Share and Balance Point VMSTC November 8, 2010

Fall 2010

Where is the balance point for this data set?

XXX

X

X

X

3 is theBalance Point

15

Page 16: Fall 2010 Mean as Fair Share and Balance Point VMSTC November 8, 2010 Mean as Fair Share and Balance Point VMSTC November 8, 2010

Fall 2010

Where is the balance point for this data set?

X

XXX X X

16

MEANSum of the distances above the mean2 + 3 = 5

Sum of the distances below the mean1+1+1+2 = 5

Page 17: Fall 2010 Mean as Fair Share and Balance Point VMSTC November 8, 2010 Mean as Fair Share and Balance Point VMSTC November 8, 2010

Fall 20104 is the Balance Point

Move 2 Steps

Move 2 Steps Move 2 Steps

Move 2 Steps

Where is the balance point for this data set?

17

Page 18: Fall 2010 Mean as Fair Share and Balance Point VMSTC November 8, 2010 Mean as Fair Share and Balance Point VMSTC November 8, 2010

Fall 2010The Mean is the Balance Point

We can confirm this by calculating:

2 + 2 + 2 + 3 + 3 + 4 + 5 + 7 + 8 = 36

36 ÷ 9 = 4

18

Page 19: Fall 2010 Mean as Fair Share and Balance Point VMSTC November 8, 2010 Mean as Fair Share and Balance Point VMSTC November 8, 2010

Fall 2010

The Balance Point is between 10 and 11 (closer to 10).

Move 2 Steps

Move 2 StepsMove 1 Step

Move 1 Step

Where is the balance point for this data set? If we could “zoom in” on the

space between 10 and 11, we could continue this process to arrive at a decimal value for the balance point.

19

Page 20: Fall 2010 Mean as Fair Share and Balance Point VMSTC November 8, 2010 Mean as Fair Share and Balance Point VMSTC November 8, 2010

Fall 2010

Mean: Balance PointMean: Balance PointMean: Balance PointMean: Balance Point

20

When demonstrating finding the balance point:

1.CHOOSE YOUR DEMONSTRATION DATA SETS INTENTIONALLY.2.Use a line plot to represent the data set.3.Begin with the extreme data points.4.Balance the moves, moving one data point from each side an equal number of steps toward the center.5.Continue until the data is distributed symmetrically or until there are only two values left on the line plot.

Page 21: Fall 2010 Mean as Fair Share and Balance Point VMSTC November 8, 2010 Mean as Fair Share and Balance Point VMSTC November 8, 2010

Fall 2010

Assessing Higher-Level Assessing Higher-Level ThinkingThinking

Assessing Higher-Level Assessing Higher-Level ThinkingThinking

21

Key Points for 2009 5.16 & 6.15:

Students still need to be able to calculate the mean by summing up and dividing, but they also need to understand:

- why it’s calculated this way (“fair share”);

- how the mean compares to the median and the mode for describing the center of a data set; and

- when each measure of center might be used to represent a data set.

Page 22: Fall 2010 Mean as Fair Share and Balance Point VMSTC November 8, 2010 Mean as Fair Share and Balance Point VMSTC November 8, 2010

Fall 2010

Mean:Mean:Fair Share & Balance PointFair Share & Balance Point

Mean:Mean:Fair Share & Balance PointFair Share & Balance Point

22

“Students need to understand that the mean ‘evens out’ or ‘balances’ a set of data and that the median identifies the ‘middle’ of a data set. They should compare the utility of the mean and the median as measures of center for different data sets. …students often fail to apprehend many subtle aspects of the mean as a measure of center. Thus, the teacher has an important role in providing experiences that help students construct a solid understanding of the mean and its relation to other measures of center.”

- NCTM Principles & Standards for School Mathematics, p. 250