fact sheet cpc30313 - certificate iii in concreting · 2018. 10. 23. · cpc30313 certificate iii...
TRANSCRIPT
FACT SHEET
CPC30313 CERTIFICATE III CONCRETING Version 1.1
This Document is a controlled document and becomes uncontrolled when downloaded or reproduced. Page 1 of 12 File: CPC30313 Cert III in Concreting Fact Sheet Ver 1.1 Ver 1.1, Dec 2014
FACT SHEET – CPC30313 - CERTIFICATE III IN
CONCRETING
This program covers building construction theory and practices related to low rise buildings. This program will provide you with the knowledge and skills to meet the technical qualifications for the qualification of Concreting.
Completion of the general induction training program specified by the National Code of Practice for
Induction Training for Construction Work (ASCC 2007) is required before entering a construction work
site. Achievement of unit CPCCOHS1001A covers this requirement.
Qualification Upon successful completion of this qualification you will receive a Certificate III in
Concreting CPC30313.
Pathways After successful completion of CPC30313 Certificate III in Concreting, you may continue with your studies by enrolling in:
• Managerial Course: (NOTE: BSBSMB401A Establish legal and risk management requirements of small business can be taken as an Elective in CPC30111 Certificate III in Concreting as assisting in starting up your Concreting business). Queensland specific.
• CPC40110 Certificate IV in Building & Construction (Building). (One Certificate III competency counts towards the Certificate IV program) (Builder Low Rise license - QLD only)
• CPC50210 Diploma of Building & Construction (Building) (Building Practitioner Registration – Western Australia only)
• CPC50210 Diploma of Building & Construction (Building) (Builder Medium Rise license - QLD only)
Career opportunities include employment as a:
• Concreter
Entry Requirements
This qualification does not have any specific entry requirements. However,
completion of Year 12 English and Mathematics is recommended.
Study Duration
and Enrolment
Periods
Enrolments are taken on an ongoing basis. Students can enrol at any time 24/7
online, over the phone or in person during business hours. Enrolment is for a
period of 12 months.
Mode of
Delivery NOTE: Everthought Education delivers this qualification by Recognition of Prior Learning (RPL) and/or Gap Training - NOT FULL TRAINING. The candidate requires a minimum of 3 to 4 years experience within this trade. (Please enquire for verification).
Flexible Delivery - Online with face to face/phone/email/online Tutorial support,
Face to Face, Distance delivery with face to face/phone/email/online Tutorial.
NOTE: Practical training consists of On the Job training and applicants who wish to
train with Everthought Education MUST have access to all physical resources.
Cost All enrolment fees are inclusive for RPL, learner resources, assessment trainer tutorials, access to internet and issuing of qualification.
Please to the Price List section for fee structure.
FACT SHEET
CPC30313 CERTIFICATE III CONCRETING Version 1.1
This Document is a controlled document and becomes uncontrolled when downloaded or reproduced. Page 2 of 12 File: CPC30313 Cert III in Concreting Fact Sheet Ver 1.1 Ver 1.1, Dec 2014
How to Enrol NOTE: This program is conducted by a combination of RPL and gap training. To
enrol in this mode of delivery and assessment you MUST be currently working in
the building and construction industry performing ‘construction type’ work with a
minimum of 3 to 4 years current experience.
NOTE: Practical Training consists of “On the Job” gap training and therefore applicants who wish to train with Everthought Education MUST have access to all physical resources.
To enrol in this qualification please contact Everthought Education. Prior to
enrolment a copy of the Student Handbook is available via download or via
contacting our office.
Recognition of
Prior Learning Applicants may receive acknowledgment of their knowledge and experiences through RPL. Evidence for RPL may include:
• work experience
• life experiences (including voluntary work and leisure pursuits)
• previous study e.g. qualifications, industry training professional development
programs or units
Credit Transfers The matrix below is a guide for previously gained Units of Competency in
CPC30313.
Learning
Support Everthought Education supports many learning needs. Reasonable adjustments can be made to assist students in achieving a competent result where learning difficulties may be present.
For students needing additional Language, Literacy and Numeracy support Everthought recommends Fruition Tuition – contact details are www.fruition.com.au, contact no. 1300 884 846.
Everthought Education offers support via many modes including face to face
tutorials, Skype, email and phone. Refer to the Student Handbook for detailed
information on support offered by Everthought Education.
Work Health &
Safety Please note that CPC30313 Certificate III in Concreting has practical units
requiring field work (On the Job), therefore students must have access to the
appropriate personal protective equipment to perform all practical tasks.
Contact Us If you would like additional information about this qualification, or about any of the wide range of qualifications offered by Everthought Education, you can visit our website www.everhtought.com.au or contact us via:
Office: 1300 656 498 Monday to Friday: 9:00am to 5:00pm
Street Address: Building 4 / 460-492 Beaudesert Road, Salisbury QLD 4107
Postal Address: PO Box 83, Salisbury QLD 4107
Email: [email protected]
To Achieve the Qualification CPC30313 CERTIFICATE III IN CONCRETING requires the
successful completion of ALL 14 Core & 6 Elective Units of Competency (20 in Total) listed in
COLUMN 1.
FACT SHEET
CPC30313 CERTIFICATE III CONCRETING Version 1.1
This Document is a controlled document and becomes uncontrolled when downloaded or reproduced. Page 3 of 12 File: CPC30313 Cert III in Concreting Fact Sheet Ver 1.1 Ver 1.1, Dec 2014
CREDIT TRANSFER & ELIGIBILITY FOR CREDIT in CPC30313 Certificate III in Concreting.
If you have successfully completed ANY of the following Units of Competency or Qualifications listed in columns 3 OR 4 and you can produce copies of your qualification you will NOT have to enrol in the corresponding Unit of Competency in COLUMN 1 to complete the full Qualification because you will be given Credit for that Unit.
Evidence of your Qualification could include: Certificates and Academic Transcripts from the Registered Training Organisation who issued the qualification.
NOTE: You cannot Credit Transfer in ALL of the Qualification; a minimum of ONE Unit MUST be
Completed to achieve the Qualification (Contact Everthought Education to discuss the one Unit to
enrol in).
CORE UNITS in
CPC30311 UNIT OUTLINE CREDIT
TRANSFER ELIGIBLE CREDIT
(CPC30313
Packaging
Rules)
CPCCCA2003A Erect and dismantle formwork for footings and slabs on ground.
This unit of competency specifies the
outcomes required to erect and dismantle
formwork to footings and slabs on ground, to
establish levels and contain finished
concrete. It includes forming basic slabs and
forming rebates to slabs on ground and steps
to strip footings.
CPCCCA2003A Erect and dismantle
formwork for
footings and slabs
on ground
Nil
CPCCCM1012A
Work effectively
and sustainably
in the
construction
industry
This unit of competency specifies the
outcomes required to prepare for and sustain
effective work within the construction
industry. It covers the identification and
clarification of the construction industry work
context, scope and employment conditions,
responsibility required to be accepted by the
individual, working in a team, individual
career path improvement activities and
sustainable work practices and techniques.
CPCCCM1012A
Work effectively and sustainably in the construction industry; OR
CPCCCM1002A
Work effectively
and sustainably in
the construction
industry
Nil
CPCCCM1013A
Plan and
organise work
This unit of competency specifies the
outcomes required to plan and organise
individual and group work activities on a
construction site. The unit includes identifying
task requirements, planning steps and
organising work.
CPCCCM1013A
Plan and organise work; OR
CPCCCM1003A
Plan and organise
work
Nil
CPCCCM1014A
Conduct
workplace
communication
This unit of competency specifies the
outcomes required to communicate
effectively with other workers in a
construction workplace environment. It
includes gathering, conveying and receiving
information through verbal and written forms
of communication.
CPCCCM1014A
Conduct workplace communication; OR
CPCCCM1004A
Conduct workplace
communication
Nil
FACT SHEET
CPC30313 CERTIFICATE III CONCRETING Version 1.1
This Document is a controlled document and becomes uncontrolled when downloaded or reproduced. Page 4 of 12 File: CPC30313 Cert III in Concreting Fact Sheet Ver 1.1 Ver 1.1, Dec 2014
CPCCCM1015A Carry out measurements and calculations
This unit of competency specifies the
outcomes required to carry out
measurements and perform simple
calculations to determine task and material
requirements for a job in a construction work
environment.
CPCCCM1015A
Carry out measurements and calculations; OR
CPCCCM1005A
Carry out
measurements and
calculations
Nil
CPCCCM2001A
Read and
interpret plans
and specifications
This unit of competency specifies the outcomes required to read and interpret plans and specifications relevant to construction operations. It includes the identification of types of plans and drawings and their functions, the recognition of commonly used symbols and abbreviations, the identification of key features and
specifications on a site plan, the
CPCCCM2001A
Read and interpret plans and specifications
Nil
comprehension of written job specifications
and the recognition of document status and
amendment detail.
CPCCCM2006B
Apply basic
levelling
procedures
This unit of competency specifies the
outcomes required to carry out levelling in a
single plane for the purposes of establishing
correct and accurate set of building
components. It includes the set up, testing
and use of levelling devices, and establishing
and transferring heights using a range of
levelling equipment.
CPCCCM2006B
Apply basic levelling procedures; OR
CPCCCM2006A
Apply basic
levelling
procedures
Nil
CPCCCO2021A
Handle
concreting
materials
This unit of competency specifies the
outcomes required to safely manually handle,
store and apply environmental management
principles associated with concreting
materials and components in preparation for
concreting works to commence. The unit
includes the identification and safe handling
of hazardous materials and waste in
accordance with material safety data sheets
(MSDS).
CPCCCO2021A
Handle concreting materials; OR
CPCCCO2011A
Handle concreting
materials
Nil
CPCCCO2022A
Use and maintain
concreting plant
tools and
equipment
This unit of competency specifies the
outcomes required to safely select and use
concreting tools and equipment for the
completion of all general concreting tasks.
The unit includes hand tools, power tools,
small plant and equipment.
CPCCCO2022A
Use and maintain
concreting plant
tools and
equipment; OR
CPCCCO2012A
Use concreting
tools and
equipment
Nil
FACT SHEET
CPC30313 CERTIFICATE III CONCRETING Version 1.1
This Document is a controlled document and becomes uncontrolled when downloaded or reproduced. Page 5 of 12 File: CPC30313 Cert III in Concreting Fact Sheet Ver 1.1 Ver 1.1, Dec 2014
CPCCCO3041A
Place concrete
This unit of competency specifies the
outcomes required to transport and place
concrete into prepared formwork or
foundations to establish a strong base for
further building work to progress from. The
unit includes the moving of concrete from
truck to pour location, concrete placement
and screeding.
CPCCCO3041A
Place concrete; OR
CPCCCO3021A
Place concrete
Nil
CPCCCO3042A
Finish concrete
This unit of competency specifies the
outcomes required to finish concrete surfaces
that have been placed and screeded in
domestic, commercial and civil applications
to provide a finish for designated
requirements. The unit includes both manual
and mechanical finishing techniques.
CPCCCO3042A
Finish concrete; OR
CPCCCO3022A
Finish concrete
Nil
CPCCCO3043A
Cure concrete
This unit of competency specifies the
outcomes required to carry out the initial
curing process to a nominated poured
concrete section to control the moisture
evaporation from finished concrete. The unit
includes curing agents and curing techniques
in accordance with engineering
specifications.
CPCCCO3043A
Cure concrete; OR
CPCCCO3023A
Cure concrete
Nil
CPCCOHS2001A
Apply OHS
requirements,
This unit of competency specifies the
outcomes required to carry out OHS
requirements through safe work practices at
CPCCOHS2001A
Apply OHS
Nil
policies and procedures in the construction
industry
any on or off-site construction workplace. It
requires the performance of work in a safe
manner through awareness of risks and work
requirements, and the planning and
performance of safe work practices with
concern for personal safety and the safety of
others.
requirements,
policies and
procedures in the
construction
industry
CPCCSF2004A Place and fix
reinforcement
materials
This unit of competency specifies the
outcomes required to place and fix
reinforcement for concrete work as part of
construction processes. It includes planning
and preparation for the work, final preparation
for placement, placing and fixing
reinforcement, checking the reinforcement
and completing clean-up activities.
CPCCSF2004A
Place and fix reinforcement materials
Nil
FACT SHEET
CPC30313 CERTIFICATE III CONCRETING Version 1.1
This Document is a controlled document and becomes uncontrolled when downloaded or reproduced. Page 6 of 12 File: CPC30313 Cert III in Concreting Fact Sheet Ver 1.1 Ver 1.1, Dec 2014
ELECTIVE UNIT DETAILS Elective units Unit outline Credit Transfer Eligible
CREDIT (CPC30313
Packaging
Rules)
Elective units (6 Electives required) A minimum of 3 elective units are to be specialist concreting units (coded ‘CO’) from the elective units listed. The remaining elective units may be chosen from the elective units listed below or any Certificate III or Certificate IV qualifications in CPC08 or another current Training
Package or
accredited
course. CPCCCA3001A
Carry out general
demolition of
minor building
structures
This unit of competency specifies the
outcomes required to carry out general
demolition work of minor building structures
to facilitate alterations, extensions and
additions to a building. It includes work
being completed to a work schedule, plans
and specifications.
CPCCCA3001A
Carry out general
demolition of
minor building
structures
Refer above.
CPCCCM1016A
Identify
requirements for
safe tilt-up work
This unit of competency specifies the
outcomes required for tilt-up work induction
training within the construction industry.
Licensing requirements will apply to this
unit of competency depending on the
regulatory requirements of each
jurisdiction.
CPCCCM1016A
Identify
requirements for
safe tilt-up work
Refer above.
CPCCCM2007B
Use explosive
power tools
This unit of competency specifies the
outcomes required to apply safe and
effective operation of explosive power tools
(EPT), used to fasten materials or fix
fasteners to bases. It includes both direct
action and indirect action explosive
powered fastening tools.
CPCCCM2007B
Use explosive
power tools; OR
CPCCCM2007A
Use explosive
power tools
Refer above.
FACT SHEET
CPC30313 CERTIFICATE III CONCRETING Version 1.1
This Document is a controlled document and becomes uncontrolled when downloaded or reproduced. Page 7 of 12 File: CPC30313 Cert III in Concreting Fact Sheet Ver 1.1 Ver 1.1, Dec 2014
Elective units Unit outline Credit Transfer Eligible CREDIT
(CPC30313
Packaging
Rules)
CPCCCM2008B
Erect and
dismantle
restricted height
scaffolding
This unit of competency specifies the
outcomes required to erect and dismantle
restricted height scaffolding to provide work
platforms for various occupational
applications. It includes placement of safety
barriers and only involves modular
scaffolding restricted to a height of 4
metres.
CPCCCM2008B
Erect and dismantle restricted height scaffolding; OR
CPCCCM2008A
Erect and
dismantle
restricted height
scaffolding
Refer above.
CPCCCO3035A
Assess and
specify concrete
supply
requirements
This unit of competency specifies the
outcomes required to evaluate concreting
projects and determine the type and
volume of concrete supply to be sourced in
preparation for concreting work. It may
include working with others and as a
member of a team.
CPCCCO3035A
Assess and
specify concrete
supply
requirements
Refer above.
CPCCCO3036A
Plan concrete
work and brief
team
This unit of competency specifies the
outcomes required to assess the size and
scope of a concreting job, identify the
resources required to complete the project
on time and within budget, and
communicate requirements to team
members in preparation for concreting work
to commence.
CPCCCO3036A
Plan concrete
work and brief
team
Refer above.
CPCCCO3044A
Carry out
decorative
finishes to
concrete
This unit of competency specifies the
outcomes required to apply decorative
finishes to concrete surfaces, providing a
distinct featured face finished for
driveways, patios, paths or other areas
requiring a decorative finish. The finish
includes the use of stamps, stencils,
colours, exposed aggregate and textured
finishes.
CPCCCO3044A
Carry out decorative finishes to concrete; OR
CPCCCO3024A
Carry out
decorative finishes
to concrete
Refer above.
CPCCCO3046A
Carry out repair
and rectification
of concrete
This unit of competency specifies the
outcomes required to repair or rectify minor
or major defects in concrete work to fix
damaged areas. The unit includes
patching, refinishing, sealing and colouring
concrete.
CPCCCO3046A Carry out repair and rectification of concrete;
OR
CPCCCO3026A
Carry out repair
and rectification of
concrete
Refer above.
FACT SHEET
CPC30313 CERTIFICATE III CONCRETING Version 1.1
This Document is a controlled document and becomes uncontrolled when downloaded or reproduced. Page 8 of 12 File: CPC30313 Cert III in Concreting Fact Sheet Ver 1.1 Ver 1.1, Dec 2014
Elective units Unit outline Credit Transfer Eligible CREDIT
(CPC30313
Packaging
Rules)
CPCCCO3047A
Cut and core
concrete
This unit of competency specifies the
outcomes required to cut and core
concrete, and plan and prepare the work.
The unit includes the use of sawing and
drilling equipment. It may also include
working with others and as a member of a
team.
CPCCCO47A
Cut and core
concrete; OR
CPCCCO27A
Cut and core
concrete
Refer above.
CPCCCO3048A
Construct tilt
panels on site
This unit of competency specifies the outcomes required to work in a team to set up, pour and place concrete tilt panels to form internal and external walls for building structures. The unit includes on-site and prefabricated
methods of panel construction. It may also
include working with others and as a
member of a team.
CPCCCO48A
Construct tilt panels on site; OR
CPCCCO28A Carry out tilt panel
construction
Refer above.
CPCCCO3049A
Apply and finish
sprayed concrete
This unit of competency specifies the
outcomes required to apply and finish
concrete using dry or wet spray to a variety
of surfaces to develop retaining structures.
The unit includes pumping concrete at high
velocity to a given structure. It may also
include working with others and as a
member of a team.
CPCCCO3049A
Apply and finish
sprayed concrete
Refer above.
CPCCCO3050A
Carry out high
performance
concreting
This unit of competency specifies the outcomes required to plan, prepare and place high performance concrete onto structures requiring high strength attributes and durability. The unit includes the finish of high
performance concrete. It may also include
working with others and as a member of a
team.
CPCCCO3050A
Carry out high
performance
concreting
Refer above.
CPCCCO3051A Conduct off-form
vertical concrete
operations
This unit of competency specifies the outcomes required to prepare and apply concrete to a slip or jump formwork structure. The unit covers sequencing, placing and
compacting concrete in formwork. It may
include working with others and as a
member of a team.
CPCCCO3051A Conduct off-form
vertical concrete
operations
Refer above.
FACT SHEET
CPC30313 CERTIFICATE III CONCRETING Version 1.1
This Document is a controlled document and becomes uncontrolled when downloaded or reproduced. Page 9 of 12 File: CPC30313 Cert III in Concreting Fact Sheet Ver 1.1 Ver 1.1, Dec 2014
CPCCCO3052A
Conduct concrete
boom delivery
operations
This unit of competency specifies the
outcomes required to conduct concrete
boom delivery operations, using a
vehicleborne pumping system, in support
of construction projects. It covers systems
with a minimum of two boom stages. The
unit covers planning and preparing for
work; conducting operational checks; the
safe and effective operation of the vehicle
and pumping system; the safe
establishment, use and monitoring of the
CPCCCO3052A
Conduct concrete
boom delivery
operations
Refer above.
Elective units Unit outline Credit Transfer Eligible CREDIT
(CPC30313
Packaging
Rules)
boom distribution system; and conducting
operator maintenance and work finalisation
activities.
CPCCCO3053A
Slump test
concrete
This unit of competency specifies the outcomes required to slump test concrete to ensure the mix is workable and complies with the delivery docket and specified order. The unit includes sampling and slump
testing to a set range or tolerance. It may
also include working with others and as a
member of a team.
CPCCCO3053A
Slump test
concrete
Refer above.
CPCCCO3054A
Operate concrete
agitator trucks
This unit of competency specifies the outcomes required to operate concrete agitator trucks in support of construction projects. The unit covers planning and preparing for
work, conducting operational checks, safely
and effectively operating a concrete
agitator truck and associated equipment for
a range of mandatory tasks, and
conducting operator maintenance and work
finalisation activities. The unit may include
working with others and as a member of a
team.
CPCCCO3054A
Operate concrete
agitator trucks
Refer above.
CPCCCO3055A
Install topping
slabs
This unit of competency specifies the outcomes required to install bonded or unbonded topping slabs to existing concrete. The unit includes grinding and scabbling
preparation techniques. It may also include
working with others and as a member of a
team.
CPCCCO3055A
Install topping
slabs
Refer above.
FACT SHEET
CPC30313 CERTIFICATE III CONCRETING Version 1.1
This Document is a controlled document and becomes uncontrolled when downloaded or reproduced. Page 10 of 12 File: CPC30313 Cert III in Concreting Fact Sheet Ver 1.1 Ver 1.1, Dec 2014
CPCCLBM3001A
Licence to operate a concrete placing boom
This unit specifies the outcomes required to
operate a concrete placing boom which is a
mobile truck mounted plant incorporating a
knuckle boom, capable of power operated
slewing and luffing to place concrete by
way of pumping through a pipeline attached
to, or forming part of, the boom of the plant
for licensing purposes.
CPCCLBM3001A
Licence to operate a concrete placing boom
Refer above.
CPCCSF2003A
Cut and bend
materials using
oxy-LPG
equipment
This unit of competency specifies the
outcomes required to heat, cut and bend
construction materials using oxy-LPG
equipment. It includes planning and
preparation for the work, setting up and
testing the equipment, cutting materials,
heating and bending materials, shutdown of
equipment and completion of clean-up
activities.
CPCCSF2003A
Cut and bend
materials using
oxy-LPG
equipment
Refer above.
FACT SHEET
CPC30313 CERTIFICATE III CONCRETING Version 1.1
This Document is a controlled document and becomes uncontrolled when downloaded or reproduced. 11 of 12 File: CPC30313 Cert III in Concreting Fact Sheet Ver 1.1 Ver 1.1, Dec 2014
Elective units Unit outline Credit Transfer Eligible CREDIT
(CPC30313
Packaging
Rules)
CPCCSF3001A
Apply
reinforcement
schedule
This unit of competency specifies the
outcomes required to interpret the
reinforcement schedule and use it to
confirm and locate materials to support
construction activities. It includes planning
and preparation for work, reading and
interpretation of the schedule, and use of
the schedule to confirm materials, locate
materials for construction use and provide
information to others on site.
CPCCSF3001A
Apply reinforcement schedule
Refer above.
BSBSMB406A
Manage small
business
finances.
This unit describes the performance
outcomes, skills and knowledge required to
implement, monitor and review strategies
for the ongoing management of a small
business's finances. It also includes day to
day financial management of the small
business. Specific legal requirements apply
to the management of a small business.
BSBSMB406A
Manage small
business finances
Refer above.
CPPCMN3001B
Participate in environmentally sustainable work practices
This unit of competency specifies the
outcomes required to participate in
environmentally sustainable work practices.
The unit requires the ability to identify
current resource usage in the workplace
and contribute to ensuring compliance with
legislative requirements. It also requires the
capacity to contribute to improvements in
sustainable work practices. It is essential
that the organisation’s approach to
ensuring environmentally sustainable work
practices, and the benefits that they bring,
are understood. The unit must be applied
strictly according to relevant state or
territory legislative and industry
requirements.
CPPCMN3001B
Participate in environmentally sustainable work practices; OR
CPPCMN3001A
Participate in
environmentally
sustainable work
practices
Refer above.
BSBSMB401A
Establish legal and risk management requirements of
small business
This unit describes the performance outcomes, skills and knowledge required to identify and comply with the regulatory, legal, taxation and insurance requirements, and risk management needs of small business. Specific legal requirements apply to the
management of a small business.
BSBSMB401A
Establish legal and
risk management
requirements of
small business
Refer above.