facade system - etanco.de · chapter 12 facade system wood or steel framework system 598 to 605...
TRANSCRIPT
CHAPTER 12
FACADE SYSTEM
Wood or steel framework system 598 to 605
TRESPA aluminium double framework 626 & 627
Accessory for ventilated facade system 628 to 630
Band of protection / Finishing profile / Ventilation profile / Expansion joint cover 606 to 611
Tile attachment 612 to 615
FACALU aluminium framework system 616 to 621
FACALU + aluminium framework system 622 & 623
Invisible fixing system 624 & 625
NCS colour chart 647 to 648
Stone cladding attachment 631 to 639
Funeral monument attachment 640
Brick masonry support system 641 to 643
Masonry lining system for renovation projet 644 & 645
Light insulation accessory 646
593Tel. +33 1 34 80 52 08 Fax +33 1 34 80 52 40 [email protected] www.etanco.eu2012
Cge2011Chap12EN.indd 593 11/07/2012 14:40:13
CONTENTS
594 Tel. +33 1 34 80 52 08 Fax +33 1 34 80 52 40 [email protected] www.etanco.eu 2012
STEEL PROFILE
605
12 - 1 Wood or steel framework system 598 to 615
12 - 2 FACALU aluminium framework system 616 to 630
ISOLCO 3000 P
598 & 599
KONSOL
599
CORNER PLATE & EXTENSION
600 to 604
TRESPA SYSTEM
626 & 627
EXPANSION JOINT COVER
610 & 611
BAND OF PROTECTION
606
DENTIFIX
606
VENTILATION PROFILE
609
FINISHING PROFILE
607 & 608
TILE ATTACHMENT
612 to 615
ISOLALU
616 to 618
ALU PROFILE
619 to 621
FACALU + SYSTEM
622 & 623
INVISIBLE FIXING SYSTEM
624 & 625
FACALU ACCESSORY
628 to 630
Cge2011Chap12EN.indd 594 11/07/2012 14:40:25
CONTENTS
595Tel. +33 1 34 80 52 08 Fax +33 1 34 80 52 40 [email protected] www.etanco.eu2012
12 - 3 Stone cladding attachment 631 to 640
RODENT-PROOF GRILLE
637
SRM / SR / VRM MODEL
631 & 632
ROD / LUG / SLEEVE
633 & 634
C-RAIL FRAMEWORK SYSTEM
635 & 636
ZACFIX ANCHOR + ZINTANE WIRE
638
GLUE SYSTEM
639
FUNERAL MONUMENT ATTACHMENT
640
12 - 4 LR BRICK system brick masonry support 641 to 643
12 - 5 Masonry lining system for renovation project 644 & 645
12 - 6 Light insulation accessory 646
DRILLSTONE
635
12 - 7 NCS chart - Colour matches 647 & 648
Cge2011Chap12EN.indd 595 11/07/2012 14:40:50
TECHNICAL GLOSSARY
596 Tel. +33 1 34 80 52 08 Fax +33 1 34 80 52 40 [email protected] www.etanco.eu 2012
Reglementations - Product technical - Technical glossary
Download from www.etanco.eu
• More informations, see our booklet FACADE in French
Cge2011Chap12EN.indd 596 11/07/2012 14:41:01
QUESTIONNAIRE
597Tel. +33 1 34 80 52 08 Fax +33 1 34 80 52 40 [email protected] www.etanco.eu2012
ISOLCO 3000 P
FACALU & FACALU+
KONSOL
LR BRICK
FEUILLE CHANTIER FACALU & FACALU+
Informations sur le chantier : Responsable ETANCO : Chantier :
: étéicos al ed : elbasnopseR : elliV : esserdA
: xaF : .léTE-mail : Informations sur le site : Zone de vent : I II III IV V Type de site : Protégé Normal Exposé Informations sur le bâtiment: Hauteur du bâtiment en m : Surface en m² : % d’ouvertures sur la façade : Matériau support : N° rapport d’essais chantier : Informations sur le revêtement extérieur : Fournisseur : Référence : Poids en kg/m² : Epaisseur de l’isolant en mm : Nu à Nu en mm : Informations sur l’équerre FACALU : Type : FACALU FACALU+ Longueur de l’équerre souhaitée en mm : Informations sur le mode de fixation :
Visible Invisible Profil / Equerre : Vis Rivet Rail C inversé Trespa TS 200 Trespa TS 300 Panneau / Profil : Vis Rivet Autre, à préciser : Nota : si e ≤ 2,5 mm rivet si e ≥ 2,5 mm vis ou rivet (avec e = épaisseur du profil) Informations sur l’ossature : Type : Bridé (Longueur du profil ≤ 3,00 m) Librement dilatable (longueur du profil ≥ 3,00 m)
ETANCO - Parc des Erables - Bât.1 - 66 Route de Sartrouville - BP 49 - 78231 LE PECQ Cedex - FRANCE - Tél. : 01 34 80 52 00 - Fax : 01 30 71 01 89 - etanco.eu
GUIDE DE POSE LR BRICK
ETANCO - Parc des Erables - Bât.1 - 66 Route de Sartrouville - BP 49 - 78231 LE PECQ Cedex - FRANCE - Tél. : 01 34 80 52 00 - Fax : 01 30 71 01 89 - etanco.eu
GUIDE DE POSE LR BRICK16
5. Questionnaire :
1- Client : Société :......................................................... Département :.............................................................................
Responsable :................................................ Téléphone : ................................................................................
Commercial LR ETANCO : ............................
2- Référence de l’affaire : ..............................................
3- □ Appel d’offre □ Demande de prix □ Commande
4- Doublage de maçonnerie posée sur becquet béton ? □ Oui □ Non
5- Type de Support :
□ Béton □ Autre : ...................................................................................
□ Rapport d’essais n°:..............................................................
6- Épaisseur de l’isolant :........................................mm
7- Nu à nu :................................................................mm
6- Hauteur de brique montée : ...................................m
8- Brique :
Longueur : �������. largeur : ����.�� hauteur : ����.�� mm, Masse Surfacique : ��� daN / m²
9- Type de joint : □ Aligné □ Croisé et □ Vif / Mince / Collé □ Maçonné
10- Type de système de supportage : □ Consoles Ponctuelles □ Consoles Monoblocs
11- Matière du système de supportage * : □ Acier GàC □ Inox 304
12- Surface : ................................................................m²
13- Habillage des linteaux : □Brique Horizontale □ Brique Verticale □ Hors Lot (en aluminium)
14- Habillage des retours de baies : □ Brique □ Hors Lot (en aluminium)
15- Console avec Batée : (voir schéma de droite, Utilisation : devant relevé d’étanchéité, devant coffre de volet roulant�)
Hauteur : ������. , Longueur à échapper : �............. mm, Localisation : ����������������...
* : Attention selon le DTU 20.1: "A partir de 2 lignes et plus de 6 m de hauteur, l'ensemble des consoles et cornières sera fabriqué en acierinoxydable, matériau de référence 3 selon la norme NF EN 845-1"
Nu à nu
Vide
Nu à nu
Vide
Hauteur de la batée
Longueur à échapper
Hauteur à échapper
✔
Questionnaires for studies and DOWNLOADABLE free quotasDownload from www.etanco.eu
Cge2011Chap12EN.indd 597 11/07/2012 14:41:06
WOOD OR STEELFRAMEWORK SYSTEM
598 Tel. +33 1 34 80 52 08 Fax +33 1 34 80 52 40 [email protected] www.etanco.eu 2012
FACADE BRACKET & EXTENSIONBRACKET FOR VENTILATED FACADE
• L : Length
BARACO FM 753 M8 anchor, see page 254 - BARACO FM 753 CRACK M8 anchor, see page 256MP3 M6 or M8 anchors, see page 245 - CHIMFORT GREEN M8 chemical anchor, see page 264CHIMFORT ATE M8 chemical anchor, see page 268 - GRISBY Extensions, see page 601SPIDO extension, see page 600 - TRCC bolt (code 54 505), see page 300Fan washer (code 73 010), see page 503 - Screw-in lag bolt (code 19 802), see page 43VBU / ZBJ 5x40 wood screw (code 25 500), see page 39FASTOVIS PI 5.5x25 (code 335 695), see page 116 - Angle bar (code 369 252), see page 605
• Cross references :
Hole Ø 5,2 Opening 8x50
Opening 9x30
Galvanized steel Z 3502.5 mm thickness
ISOLCO 3000 P / Ga
• QUALICONSULT new technology study No. 071780100057• Complying with CSTB 3316 booklet• Complying with CSTB 3194 booklet• Hot galvanised steel available on request• ISOLCO 3000 P option with 10 or 12 mm diameter lights, ask us.• For further information, refer to our FACADE booklet.• Facade application:
- Bracket for ventilated facade vertical timber rafter mounting or metal rails
L Pack. Code40 100 360 99150 200 360 99360 200 360 99570 200 360 99780 200 361 00090 200 361 005
100 100 361 010110 100 361 015120 100 361 020130 100 361 026140 100 361 030150 100 361 035160 100 361 040170 100 361 046180 100 361 050190 100 361 048200 100 361 051210 100 361 049220 100 361 060230 50 361 056240 50 361 052250 50 361 053260 50 361 055270 50 361 070280 50 361 057290 50 361 058300 50 361 054
Cge2011Chap12EN.indd 598 11/07/2012 14:41:13
WOOD OR STEELFRAMEWORK SYSTEM
599Tel. +33 1 34 80 52 08 Fax +33 1 34 80 52 40 [email protected] www.etanco.eu2012
FACADE BRACKET & EXTENSIONBRACKET FOR VENTILATED FACADE
BARACO FM 753 / SS A4 M8 anchor, see page 254BARACO FM 753 CRACK / SS A4 M8 anchor, see page 256MP3 / SS A4 M6 or M8 anchor, see page 245 - CHIMFORT GREEN M8 chemical anchor, see page 264CHIMFORT ATE M8 chemical anchor, see page 268 - Extensions, see page 601TRCC bolt (code 54 505), see page 300 - Fan washer, SS A2 (code 73 130), see page 503Screw-in lag bolt (code 19 802), see page 43 - Wood screw, VBU / SS 5x40 (code 33 020), see page 30
• Cross references :
Hole Ø 5,2 Opening 8x50
Opening 9x30
Austenitic stainless steelA2 Aisi 304 - 2 mm thickness
ISOLCO 3000 P / SS A2
• Complying with CSTB 3316 booklet• Complying with CSTB 3194 booklet• A4 Aisi 316 austenitic stainless steel on request.• Facade application:
- Bracket for ventilated facade vertical timber rafter mounting
L Pack. Code60 100 361 30080 100 361 304100 100 361 311110 100 361 361120 100 361 308140 100 361 315160 100 361 316170 100 361 318180 50 361 321200 50 361 320220 50 361 324240 50 361 323280 50 361 326300 50 361 322
REINFORCED BRACKET FOR VENTILATED FACADE
• L : Length
BARACO FM 753 M8 anchors, see page 254 - BARACO FM 753 CRACK M8 anchors, see page 256MP3 M6 or M8 anchors, see page 245 - CHIMFORT GREEN M8 chemical anchor, see page 264CHIMFORT ATE M8 chemical anchor, see page 268 - SPIDO extension, see page 600TRCC bolt (code 54 505), see page 300 - Fan washer (code 73 010), see page 503FASTOVIS PI 5.5x25 (code 335 695), see page 116 - Angle bar (code 369 252), see page 605
• Cross references :
Hole Ø 5,5
Opening 9 x 30
Opening 8 x 45
Galvanized steel Z 3502.5 mm thickness
KONSOL
• Advantage:- Very high resistance to bending
• Hot galvanised and A2 Aisi 304 austenitic stainless steel on request.• For more informations, refer to our FACADE booklet.• Facade application:
- Reinforced bracket for ventilated facade horizontally mounting metal rails
L Pack. Code60 100 363 00080 80 363 003100 50 363 006120 50 363 009140 50 363 012160 40 363 016180 45 363 019200 36 363 022
Cge2011Chap12EN.indd 599 11/07/2012 14:41:15
WOOD OR STEELFRAMEWORK SYSTEM
600 Tel. +33 1 34 80 52 08 Fax +33 1 34 80 52 40 [email protected] www.etanco.eu 2012
FACADE BRACKET & EXTENSIONEXTENSION FOR KONSOL OR ISOLCO 3000 P BRACKETS
• L : Length
ISOLCO 3000 P, see page 598 - KONSOL, see page 599 - TRCC bolt (code 54 505), see page 300Fan washer (code 73 010), see page 503 - FASTOVIS PI 5.5x25 (code 335 695), see page 116Angle bar (code 369 252), see page 605
• Cross references :
Hole Ø 5,5
KONSOL
A.R.
A.R.
ISOLCO
Galvanized steel Z 3502.5 mm thickness
SPIDO
• Advantages:- Compensates for out of plumb indications, the spring clip is used to clip the metal rail, very high
resistance to bending (with KONSOL)• For more informations, refer to our FACADE booklet.• Facade application:
- Adjustable extension ts ISOLCO brackets for vertically fastening metal rails.- Adjustable extension ts KONSOL reinforced brackets for horizontally fastening metal rails.
L For bracket length A.R. min. * A.R. max. * Pack. Code125 60 / >60 75 / 55 90 100 363 015
(*) A.R.: Adjustment range min. / max. to add to the bracket length of at least 60 mm
Cge2011Chap12EN.indd 600 11/07/2012 14:41:22
WOOD OR STEELFRAMEWORK SYSTEM
601Tel. +33 1 34 80 52 08 Fax +33 1 34 80 52 40 [email protected] www.etanco.eu2012
FACADE BRACKET & EXTENSIONOFFSET EXTENSION FOR ISOLCO 3000 P BRACKET
ISOLCO 3000 P, see page 598 - TRCC bolt (code 54 505), see page 300Fan washer (code 73 010), see page 503 - Stainless steel rivet 4.8x18 (code 273 600), see page 188Alu/steel 4.8x14 rivet (code 275 220), see page 193 - FASTOVIS PI 5.5x25 (code 335 695), see page 116Angle bar (code 369 252), see page 605
• Cross references :
Hole Ø 5
Hole Ø 8
Galvanized steel Z 3502.5 mm thickness
GRISBY PM / 3-hole
• Complying with CSTB 3194 booklet• Offset 7 mm estension for passing a screw head between the bracket and its extension• Facade application:
- Adjustable extension that ts ISOLCO brackets for vertically mounting metal rails.
L For bracket length A.R. min. * A.R. max. * Pack. Code83 80 / >80 15 / 0 35 100 361 120
(*) A.R.: Adjustment range min. / max. to add to the bracket length of at least 80 mm
• L : Length
ISOLCO 3000 P, see page 598 - TRCC bolt (code 54 505), see page 300Fan washer (code 73 010), see page 503 - Screw-in lag bolt (code 19 802), see page 43VBU / ZBJ 5x40 wood screw (code 25 500), see page 39
• Cross references :
Hole Ø 5
Hole Ø 8
Galvanized steel Z 3502.5 mm thickness
GRISBY GM / 5-hole
• Complying with CSTB 3316 booklet• Offset 7 mm estension for passing a screw head between the bracket and its extension• Facade application:
- Adjustable extension that ts ISOLCO brackets for vertically mounting timber frames.
L For bracket length A.R. min. * A.R. max. * Pack. Code86 80 / >80 15 / 0 35 100 361 122
(*) A.R.: Adjustment range min. / max. to add to the bracket length of at least 80 mm
Cge2011Chap12EN.indd 601 11/07/2012 14:41:25
WOOD OR STEELFRAMEWORK SYSTEM
602 Tel. +33 1 34 80 52 08 Fax +33 1 34 80 52 40 [email protected] www.etanco.eu 2012
FACADE BRACKET & EXTENSIONEXTENSION FOR ISOLCO 3000 P BRACKET
ISOLCO 3000 P, see page 598 - TRCC bolt (code 54 505), see page 300Fan washer (code 73 010), see page 503 - Screw-in lag bolt (code 19 802), see page 43VBU / ZBJ 5x40 wood screw (code 25 500), see page 39
• Cross references :
Hole Ø 5
Opening 8 x 40
Galvanized steel Z 3502.5 mm thickness
GRISBY 180
• Facade application:- Adjustable extension that ts ISOLCO brackets for vertically mounting timber frames.
L For bracket length A.R. min. * A.R. max. * Pack. Code125 60 / >60 70 / 50 90 100 361 140
(*) A.R.: Adjustment range min. / max. to add to the bracket length of at least 60 mm
• L : Length
ISOLCO 3000 P, see page 598 - TRCC bolt (code 54 505), see page 300Fan washer (code 73 010), see page 503 - Screw-in lag bolt (code 19 802), see page 43VBU / ZBJ 5x40 wood screw (code 25 500), see page 39
• Cross references :
Hole Ø 5
Opening 8 x 40
Galvanized steel Z 3502.5 mm thickness
GRISBY 90
• Facade application:- Adjustable extension that ts ISOLCO brackets for vertically mounting timber frames.
L For bracket length A.R. min. * A.R. max. * Pack. Code95 60 / >60 40 / 20 60 100 361 150
(*) A.R.: Adjustment range min. / max. to add to the bracket length of at least 60 mm
Cge2011Chap12EN.indd 602 11/07/2012 14:41:27
WOOD OR STEELFRAMEWORK SYSTEM
603Tel. +33 1 34 80 52 08 Fax +33 1 34 80 52 40 [email protected] www.etanco.eu2012
FACADE BRACKET & EXTENSIONEXTENSION FOR ISOLCO 3000 P BRACKET
ISOLCO 3000 P, see page 598 - TRCC bolt (code 54 505), see page 300Fan washer (code 73 010), see page 503 - Screw-in lag bolt (code 19 802), see page 43VBU / ZBJ 5x40 wood screw (code 25 500), see page 39
• Cross references :
Galvanized steel Z 3502.5 mm thickness
GRISBY SIMPLE
• Facade application:- Adjustable extension that ts ISOLCO brackets for vertically mounting timber frames.
L For bracket length A.R. min. * A.R. max. * Pack. Code150 80 / >80 75 / 50 100 100 361 100200 80 / >80 125 / 100 150 100 361 110
(*) A.R.: Adjustment range min. / max. to add to the bracket length of at least 80 mm
U REINFORCEMENT AGAINST BUCKLING OF ISOLCO 3000 P BRACKETS
GOLDOVIS (code 331 200), see page 124• Cross reference :
Galvanized steel Z 3502.5 mm thickness
U REINFORCEMENT
• Facade application:- U shaped reinforcement against buckling of ISOLCO 3000 P brackets with lengths in excess of 200 mm.
L Pack. Code250 30 361 153300 25 361 155
FACADE ACCESSORYPIERCED BRACKET FOR ATTACHING WOODEN RAFTERS
• Ht : Height - L : Length
Anchoring nail (code 29 900), see page 51 - VBU / ZBJ 5x40 wood screw (code 25 500), see page 39• Cross references :
HoleØ 5
Galvanized steel Z 2752.5 mm thickness
RAFTER CONNECTOR
• Facade application:- Pierced brakcet for attaching wooden rafters
Ht L Pack. Code70 70 100 361 126
Cge2011Chap12EN.indd 603 11/07/2012 14:41:30
WOOD OR STEELFRAMEWORK SYSTEM
604 Tel. +33 1 34 80 52 08 Fax +33 1 34 80 52 40 [email protected] www.etanco.eu 2012
FACADE ACCESSORYCORNER PLATE
ISOLCO 3000 P, see page 598 - BARACO FM 753 M8 anchor, see page 254TRCC bolt (code 54 505), see page 300 - Fan washer (code 73 010), see page 503Screw-in lag bolt (code 19 802), see page 43 - VBU / ZBJ 5x40 wood screw (code 25 500), see page 39
• Cross references :
Opening 10 x 65
Opening 8 x 60
Galvanized steel Z 3502.5 mm thickness
CORNER PLATE
• Facade application:- ISOLCO bracket that ts a corner plate for attaching rectangular or square rafters
Ht L Pack. Code120 180 25 361 124
PIERCED PLATE FOR BUTT FITTING WOODEN RAFTERS
• Thick. : Thickness - Ht : Height - L : Length
Anchoring nail (code 29 900), see page 51 - VBU Ø 4,5 wood screw, see page 39• Cross references :
Galvanized steel Z 275
BUTT FITTING PLATE
• Plates 60x300 Complying with CSTB 3316 booklet• Two plates per butt joint• Facade application:
- Pierced plate for but tting wooden rafters
Ht L Thick. Pack. Code40 120 1,5 100 361 128
60 300 1 50 361 12960 300 2,5 50 361 130
Cge2011Chap12EN.indd 604 11/07/2012 14:41:34
WOOD OR STEELFRAMEWORK SYSTEM
605Tel. +33 1 34 80 52 08 Fax +33 1 34 80 52 40 [email protected] www.etanco.eu2012
FACADE ACCESSORYL SHAPED ANGLE BAR
SPIDO extension (code 363 015), see page 600 - Stainless 4.8x18 rivet (code 273 600), see page 188Alu/steel 4.8x14 rivet (code 275 220), see page 193 - FASTOVIS PI 5.5x25 (code 335 695), see page 116
• Cross references :
4meters
Galvanized steel Z 2751.5 mm thickness
ANGLE BAR
• Complying with CSTB 3194 booklet• Facade application:
- L shaped angle bar that ts a SPIDO extension
Section Lg, (m) Pack. (m) Code50 x 50 4 100 369 252
OMEGA PROFILE
SPIDO extension (code 363 015), see page 600 - Stainless 4.8x18 rivet (code 273 600), see page 188Alu/steel 4.8x14 rivet (code 275 220), see page 193 - FASTOVIS PI 5.5x25 (code 335 695), see page 116
• Cross references :
Galvanized steel Z 2751.5 mm thickness
OMEGA PROFILE
• Complying with CSTB 3194 booklet• Facade application:
- Omega pro le shaped that ts a SPIDO extension
Section Lg, (m) Pack. (m) Code30 x 30 x 30 x 30 x 30 2,7 2,7 611 41030 x 30 x 30 x 30 x 30 4 4 611 41130 x 30 x 30 x 30 x 30 5,4 5,4 611 412
C PROFILE
SPIDO extension (code 363 015), see page 600 - Stainless 4.8x18 rivet (code 273 600), see page 188Alu/steel 4.8x14 rivet (code 275 220), see page 193 - FASTOVIS PI 5.5x25 (code 335 695), see page 116
• Cross references :
Galvanized steel Z 2751.5 mm thickness
C PROFILE
• Complying with CSTB 3194 booklet• Facade application:
- Omega pro le shaped that ts a SPIDO extension
Section Lg, (m) Pack. (m) Code30 x 30 x 30 2,7 2,7 611 40030 x 30 x 30 4 4 611 40130 x 30 x 30 5,4 5,4 611 402
Cge2011Chap12EN.indd 605 11/07/2012 14:41:38
BAND OF PROTECTION
606 Tel. +33 1 34 80 52 08 Fax +33 1 34 80 52 40 [email protected] www.etanco.eu 2012
PVC LIP SEAL
Width
Coloured PVCPVC
LIP SEAL
• Complying with CSTB 3316 booklet• Facade application:
- Flexible lip seal to be fastened onto the rafter between it and the facade covering.
Width Colour Pack. (m) Code38 White 50 366 50138 Black 50 366 50038 Grey 50 366 50538 Brown 50 366 503
60 White 50 366 51060 Black 50 366 51260 Grey 50 366 51660 Brown 50 366 514
FLEXIBLE LIPLESS SEAL
Lipless
seal
width Lipless
seal
width
Coloured PVC0.5 mm thickness
FLEXIBLELIPLESS SEAL
• Complying with CSTB 3316 booklet• The exible seal must stick out on either side of the timber rafter: 10 mm on each side• Facade application:
- Flexible lipless seal to be fastened onto the timber between it and the facade covering.
Width Colour Ral Pack. (m) Code80 White 9010 50 366 52080 Black 9011 50 366 523
100 White 9010 50 366 524100 Black 9011 50 366 527
120 Black 9011 50 366 531
SERRATED BRACKET FOR INSULATORINSULATION ATTACHMENT - FOR NAILING TO WOODEN JOISTS
• Ht : Height - L : Length
Alu/Zinc alloy0.5 mm thickness
DENTIFIX
• Facade application:- Soft insulation fastener, can be nailed onto timber rafters
L Ht P Pack. Code150 50 40 300 260 800
Cge2011Chap12EN.indd 606 11/07/2012 14:41:44
FINISHING PROFILE
607Tel. +33 1 34 80 52 08 Fax +33 1 34 80 52 40 [email protected] www.etanco.eu2012
OUTWARD ANGLE PROFILE - LENGTH 3 METERSPanel thick Pre-painted Aluminium
1 mm thicknessP.A.S.
Al / PrL
• Colours std.: RAL 1013 / 1015 / 7016 / 7035 / 9001 / 9007 / 9010 / 9016 - RAL Painting and other widths available on request
• Facade application:- Decorative corner pro le
For panel thick. (mm) Pack. (m) * Code10 30 611 700
15 30 611 702
20 30 611 704
(*) Packaging: One 10 x 3 meters bundle, cannot be split
INWARD ANGLE PROFILE - LENGTH 3 METERSPanel thick Pre-painted Aluminium
1 mm thicknessP.A.R.Al / PrL
• Colours std.: RAL 1013 / 1015 / 7016 / 7035 / 9001 / 9007 / 9010 / 9016 - RAL Painting and other widths available on request
• Facade application:- Decorative corner pro le
For panel thick. (mm) Pack. (m) * Code10 30 611 710
15 30 611 712
20 30 611 714
(*) Packaging: One 10 x 3 meters bundle, cannot be split
Cge2011Chap12EN.indd 607 11/07/2012 14:41:50
FINISHING PROFILE
608 Tel. +33 1 34 80 52 08 Fax +33 1 34 80 52 40 [email protected] www.etanco.eu 2012
OUTWARD ANGLE PROFILE - LENGTH 3 METERS
Panel thick.
Coloured rigid PVC
P.A.S.
• Facade application:- Decorative corner pro le
For panel thick. (mm) Colour Pack. (m) * Code6 White 30 366 7006 Black 30 366 7026 Grey 30 366 7066 Brown 30 366 704
10 White 30 366 71010 Black 30 366 71210 Grey 30 366 71610 Brown 30 366 714
(*) Packaging: One 10 x 3 meters bundle, cannot be split
HORIZONTAL PROFILE - LENGTH 2.5 METERS
Panel thick.
Coloured rigid PVC
P.H.
• Facade application:- Decorative horizontal pro le
For panel thick. (mm) Colour Pack. (m) * Code6 White 50 366 7526 Black 50 366 7546 Grey 50 366 7586 Brown 50 366 756
8 White 50 366 7608 Black 50 366 7628 Grey 50 366 7668 Brown 50 366 764
10 White 50 366 77010 Black 50 366 77210 Grey 50 366 77610 Brown 50 366 774
(*) Packaging: One 20 x 2.5 meters bundle, cannot be split
U-SHAPED FINISHING PROFILE - LENGTH 2.5 METERS
Panel thick.
Coloured rigid PVC
P.U.
• Facade application:- Decorative nishing pro le
For panel thick. (mm) Colour Pack. (m) * Code10 White 25 366 67010 Black 25 366 671
(*) Packaging: One 10 x 2.5 meters bundle, cannot be split
Cge2011Chap12EN.indd 608 11/07/2012 14:41:52
VENTILATION PROFILE
609Tel. +33 1 34 80 52 08 Fax +33 1 34 80 52 40 [email protected] www.etanco.eu2012
RODENT-PROOF GRILLE - LENGTH 2.5 METERS
TAP-LARGE 6/10x40 anchor (Zn code 359 130) or (SS A2 code 359 091), see page 224Drill bits, concrete, see page 680
• Cross references :
BA
AluminiumRODENT-PROOF GRILLE
Alu
• Other widths available on request• Facade application:
- Start section for ventilated facade
A B Pack. (m) Code40 100 2,5 668 09040 120 2,5 668 09140 140 2,5 668 09240 160 2,5 668 09340 180 2,5 668 09440 200 2,5 668 09540 220 2,5 668 09640 240 2,5 668 097
Cge2011Chap12EN.indd 609 11/07/2012 14:41:54
EXPANSION JOINT COVER
610 Tel. +33 1 34 80 52 08 Fax +33 1 34 80 52 40 [email protected] www.etanco.eu 2012
FLAT MODEL - LENGTH 3 METERS
Stainless steel retaining clip (code 611 356 or 611 358), see page 611• Cross reference :
Coloured PVCPVC FLAT
JOINT COVER
• Extruded PVC: Complying with standards NFT 54 405 and DIN 7748 Part 2.• Number of clips per bar: 5• Facade application:
- Regular expansion joint cover
Width Colour For seals Pack. (m) * Code50 White 15 - 25 30 611 30250 Grey 15 - 25 30 611 30650 Beige 15 - 25 30 611 310
70 White 35 - 50 30 611 31470 Grey 35 - 50 30 611 31870 Beige 35 - 50 30 611 322
90 White 35 - 60 30 611 32690 Grey 35 - 60 30 611 33090 Beige 35 - 60 30 611 334
(*) Packaging: One 10 x 3 meters bundle, cannot be split
Stainless steel retaining clip (code 611 356 or 611 358), see page 611• Cross reference :
Anodized aluminum alloy 6063 T6FLAT JOINT COVER
ALUMINIUM
• Number of clips per bar: 4• Painting and other widths available on request• Facade application:
- Regular expansion joint cover
Width For seals Pack. (m) * Code50 15 - 25 30 611 33860 20 - 40 30 611 34270 35 - 50 30 611 346
(*) Packaging: One 10 x 3 meters bundle, cannot be split
Cge2011Chap12EN.indd 610 11/07/2012 14:41:55
EXPANSION JOINT COVER
611Tel. +33 1 34 80 52 08 Fax +33 1 34 80 52 40 [email protected] www.etanco.eu2012
CORNER MODEL - LENGTH 3 METERS
Stainless steel retaining clip (codes 611 356 or 611 358), see page 611• Cross reference :
Coloured PVCPVC CORVERJOINT COVER
• Extruded PVC: Complying with standards NFT 54 405 and DIN 7748 Part 2.• Number of clips per bar: 5• Facade application:
- Corner expansion joint cover
Width Colour For seals Pack. (m) * Code50 White 15 - 25 30 611 30050 Grey 15 - 25 30 611 30450 Beige 15 - 25 30 611 308
70 White 35 - 50 30 611 31270 Grey 35 - 50 30 611 31670 Beige 35 - 50 30 611 320
90 White 35 - 60 30 611 32490 Grey 35 - 60 30 611 32890 Beige 35 - 60 30 611 332
(*) Packaging: One 10 x 3 meters bundle, cannot be split
Stainless steel retaining clip (codes 611 356 or 611 358), see page 611• Cross reference :
Anodized aluminum alloy 6063 T6ALUMINIUM
CORNER JOINT COVER
• Number of clips per bar: 4• Painting and other widths available on request• Facade application:
- Corner expansion joint cover
Width For seals Pack. (m) * Code50 15 - 25 30 611 33660 20 - 40 30 611 34070 35 - 50 30 611 344
(*) Packaging: One 10 x 3 meters bundle, cannot be split
CLIP FOR EXPANSION JOINT COVER
FLAT JOINT COVER, see page 610 - CORNER JOINT COVER, see page 611• Cross references :
Austenitic stainless steelAisi 301 E4
RETAINING CLIP / SS
• Stainless steel: Standard DIN 17441 - Standard EN 10088-2 1434• Clips are pressed in by hand, they ensure stable fastening.• Facade application:
- Fastening expansion joint covers
Model For seals Pack. CodeCLIP S 10 - 35 50 611 356CLIP L 35 - 60 50 611 358
Cge2011Chap12EN.indd 611 11/07/2012 14:41:57
TILE ATTACHMENT
612 Tel. +33 1 34 80 52 08 Fax +33 1 34 80 52 40 [email protected] www.etanco.eu 2012
ON WOOD FRAMEWORK OR ALUMINIUM FACALU SYSTEMBASIC SYSTEM WITH SEPARATE STAPLE HOOK CLIPPING - NOT FITTEDFOR CERAMIC THICKNESS 10.5 MM
VBU stainless 4x30 (code 30 065), see page 30 - Rivet all stainless 4x8 (code 273 490), see page 188Drill bit, steel Ø 4.2 (code 281 991), see page 669
• Cross references :
Austenitic stainless steelAisi 301 E2
AL’AGRAFECENTRAL NM
• Basic system for clipping the hook staple used to attach ceramic• ETANCO colour chart, see page 647• AL’AGRAFE for xing other tile thicknesses available on request.• Every AL’AGRAFE is used with two VBU screws or two rivets• For more informations refer to our FACADE booklet.• Facade application:
- Attaching 10.5 mm thick ceramic onto a timber or aluminium framework
Model Quality For ceramic thickness Pack. CodeBase only Natural nish SS 10,5 100 366 931
Staple hook Natural nish SS 10,5 100 366 933
Base only Painted SS * 10,5 100 366 936Staple hook Painted SS * 10,5 100 366 937
(*) Black painted base - Hook painted in all RAL shades
VBU stainless 4x30 (code 30 065), see page 30 - Rivet all stainless 4x8 (code 273 490), see page 188Drill bit, steel Ø 4.2 (code 281 991), see page 669
• Cross references :
Austenitic stainless steelAisi 301 E2
AL’AGRAFESTART & FINISH NM
• Basic system for clipping the hook staple used to attach ceramic• ETANCO colour chart, see page 647• AL’AGRAFE for xing other tile thicknesses available on request.• Every AL’AGRAFE is used with two VBU screws or two rivets• For more informations refer to our FACADE booklet.• Facade application:
- Attaching 10.5 mm thick ceramic onto a timber or aluminium framework
Model Quality For ceramic thickness Pack. CodeBase only Natural nish SS 10,5 100 366 911
Staple hook Natural nish SS 10,5 100 366 913
Base only Painted SS * 10,5 100 366 916Staple hook Painted SS * 10,5 100 366 917
(*) Black painted base - Hook painted in all RAL shades
Cge2011Chap12EN.indd 612 11/07/2012 14:42:00
TILE ATTACHMENT
613Tel. +33 1 34 80 52 08 Fax +33 1 34 80 52 40 [email protected] www.etanco.eu2012
ON WOOD FRAMEWORK OR ALUMINIUM FACALU SYSTEMBASIC SYSTEM WITH PREFITTED STAPLE HOOKFOR CERAMIC THICKNESS 10.5 MM
VBU stainless 4x30 (code 30 065), see page 30 - Rivet all stainless 4x8 (code 273 490), see page 188Drill bit, steel Ø 4.2 (code 281 991), see page 669
• Cross references :
Austenitic stainless steelAisi 301 E2
AL’AGRAFECENTRAL Fitted
• AL’AGRAFE for xing other tile thicknesses available on request.• ETANCO colour chart, see page 647• Every AL’AGRAFE is used with two VBU screws or two rivets• For more informations refer to our FACADE booklet.• Facade application:
- Attaching 10.5 mm thick ceramic onto a timber or aluminium framework
Model Quality For ceramic thickness Pack. CodeBase + Hook Natural nish SS 10,5 100 366 940
Base + Hook Painted SS * 10,5 100 366 941
(*) Black painted base - Hook painted in all RAL shades
VBU stainless 4x30 (code 30 065), see page 30 - Rivet all stainless 4x8 (code 273 490), see page 188Drill bit, steel Ø 4.2 (code 281 991), see page 669
• Cross references :
Austenitic stainless steelAisi 301 E2
AL’AGRAFESTART & FINISH Fitted
• AL’AGRAFE for xing other tile thicknesses available on request.• ETANCO colour chart, see page 647• Every AL’AGRAFE is used with two VBU screws or two rivets• For more informations refer to our FACADE booklet.• Facade application:
- Attaching 10.5 mm thick ceramic onto a timber or aluminium framework
Model Quality For ceramic thickness Pack. CodeBase + Hook Natural nish SS 10,5 100 366 920
Base + Hook Painted SS * 10,5 100 366 921
(*) Black painted base - Hook painted in all RAL shades
Cge2011Chap12EN.indd 613 11/07/2012 14:42:02
TILE ATTACHMENT
614 Tel. +33 1 34 80 52 08 Fax +33 1 34 80 52 40 [email protected] www.etanco.eu 2012
ON WOOD FRAMEWORK OR ALUMINIUM FACALU SYSTEMBASIC SYSTEM WITH ONE-PIECE STAPLE HOOKFOR CERAMIC THICKNESS 10.5 MM
VBU stainless 4x30 (code 30 065), see page 30 - Rivet all stainless 4x8 (code 273 490), see page 188Drill bit, steel Ø 4.2 (code 281 991), see page 669
• Cross references :
Austenitic stainless steelAisi 301 E2
AL’AGRAFE 1/2
• AL’AGRAFE for xing other tile thicknesses available on request.• ETANCO colour chart, see page 647• Every AL’AGRAFE is used with two VBU screws or two rivets• For more informations refer to our FACADE booklet.• Facade application:
- Attaching 10.5 mm thick ceramic onto a timber or aluminium framework
Model Quality For ceramic thickness Pack. CodeMonobloc Natural nish SS 10,5 100 366 952
Monobloc Painted SS * 10,5 100 366 953
(*) Fully painted part: all RAL colours
Cge2011Chap12EN.indd 614 11/07/2012 14:42:06
TILE ATTACHMENT
615Tel. +33 1 34 80 52 08 Fax +33 1 34 80 52 40 [email protected] www.etanco.eu2012
ON WOOD FRAMEWORK OR ALUMINIUM FACALU SYSTEMSTAMPED PLATE WITH 65 MM REDUCED WIDTH AND ATTACHING LUGS PROFILED TO THICKNESS OF FACADE PLATE
VBU stainless 4x30 (code 30 065), see page 30 - Rivet all stainless 4x8 (code 273 490), see page 188Drill bit, steel Ø 4.2 (code 281 991), see page 669
• Cross references :
Hole Ø 5
Central runner
Half-left hand
Half-right hand
Start and end
Austenitic stainless steelA2 Aisi 304 - 1 mm thickness
PAT’AGRAF PR 65
• ETANCO colour chart, see page 647• Every PAT’AGRAF is used with two VBU screws or two rivets• Facade application:
- Attaching ceramic onto a timber or aluminium framework
Model Quality For ceramic thickness Pack. CodeRegular central Natural nish SS 8 100 366 810Regular central Natural nish SS 11 100 366 564Regular central Painted SS * 8 100 366 815Regular central Painted SS * 11 100 366 565
LH-half Natural nish SS 8 100 366 820LH-half Natural nish SS 11 100 366 584LH-half Painted SS * 8 100 366 825LH-half Painted SS * 11 100 366 585
RH-half Natural nish SS 8 100 366 830RH-half Natural nish SS 11 100 366 604RH-half Painted SS * 8 100 366 835RH-half Painted SS * 11 100 366 605
Start & Finish Natural nish SS 8 100 366 840Start & Finish Natural nish SS 11 100 366 624Start & Finish Painted SS * 8 100 366 845Start & Finish Painted SS * 11 100 366 625
(*) Fully painted part: All RAL colours
Cge2011Chap12EN.indd 615 11/07/2012 14:42:08
FACALU ALUMINIUMFRAMEWORK SYSTEM
616 Tel. +33 1 34 80 52 08 Fax +33 1 34 80 52 40 [email protected] www.etanco.eu 2012
CLIP BRACKET FOR VENTILATED FACADE - HEIGHT 80 MM
• L : Length
T pro le, see page 619 - L pro le, see page 620 - Thermostop LR 80 wedge (code 611 013), see page 628BARACO FM 753 M10 anchor, see page 254 - BARACO FM 753 CRACK M10 anchor, see page 256MP3 M6-8-10 anchor, see page 245 - CHIMFORT GREEN M10 chemical anchor, see page 264CHIMFORT ATE M10 chemical anchor, see page 268
• Cross references :
Opening 5,5 x 25
Hole 5,1
Carrying element Carrying element Carrying element
Aluminium 6060 T53 mm thickness
ISOLALU BRACKETLR 80
• Complying with CSTB 3194 booklet• VERITAS Test Report No. GEN 1 / 000 118 X 01 complying with Annex 1 CSTB 3194 booklet (January 2000)• Complying with standards: NF A 50-411 & NF A 50-710• For more informations, refer to our FACADE booklet.• Facade application:
- Aluminium framework system, bracket for vertically fastening aluminium pro les.
L Dn min. * Dn max. * Pack. Code40 63 68 100 611 00060 73 98 100 611 00180 93 118 100 611 002
100 113 138 100 611 003120 133 158 100 611 004140 153 178 50 611 005160 173 198 50 611 006180 193 218 50 611 068200 213 238 50 611 069220 233 258 50 611 071240 253 278 50 611 141
(*) Dn min. / max. with Thermostop wedge 6 mm thickness
Test Report
Cge2011Chap12EN.indd 616 11/07/2012 14:42:13
FACALU ALUMINIUMFRAMEWORK SYSTEM
617Tel. +33 1 34 80 52 08 Fax +33 1 34 80 52 40 [email protected] www.etanco.eu2012
CLIP BRACKET FOR VENTILATED FACADE - HEIGHT 150 MM
• L : Length
T pro le, see page 619 - L pro le, see page 620Thermostop LR 150 wedge (code 611 014), see page 628 - BARACO FM 753 M10 anchor, see page 254BARACO FM 753 CRACK M10 anchor, see page 256 - MP3 M6-8-10 anchor, see page 245CHIMFORT GREEN M10 chemical anchor, see page 264CHIMFORT ATE M10 chemical anchor, see page 268
• Cross references :
Opening 5,5 x 25
Hole Ø 5,1
Aluminium 6060 T53 mm thickness
ISOLALU bracketLR 150
• Complying with CSTB 3194 booklet• VERITAS Test Report No. 1947318 / 1A complying with Annex 1 CSTB 3194 booklet (January 2000)• Complying with standards: NF A 50-411 & NF A 50-710• Facade application:
- Aluminium framework system, bracket for vertically fastening aluminium pro les.
L Dn min. * Dn max. * Pack. Code40 63 68 100 611 01960 73 98 100 611 00780 93 118 100 611 008100 113 138 100 611 009120 133 158 100 611 010140 153 178 50 611 011160 173 198 50 611 012180 193 218 50 611 146200 213 238 50 611 083220 233 258 50 611 147240 253 278 50 611 149
(*) Dn min. / max. with Thermostop wedge 6 mm thickness
Test Report
Cge2011Chap12EN.indd 617 11/07/2012 14:42:15
FACALU ALUMINIUMFRAMEWORK SYSTEM
618 Tel. +33 1 34 80 52 08 Fax +33 1 34 80 52 40 [email protected] www.etanco.eu 2012
BRACKET WITHOUT CLIP FOR VENTILATED FACADE - HEIGHT 80 MM
T pro le, see page 619 - L pro le, see page 620 - Thermostop LR 80 wedge (code 611 013), see page 628BARACO FM 753 M10 anchor, see page 254 - BARACO FM 753 CRACK M10 anchor, see page 256MP3 M6-8-10 anchor, see page 245 - CHIMFORT GREEN M10 chemical anchor, see page 264CHIMFORT ATE M10 chemical anchor, see page 268
• Cross references :
80
40
Opening5,5 x 25
Hole 5,1
Aluminium 6060 T53 mm thickness
ISOLALU BRACKETLR 80 SP
• Complying with CSTB 3194 booklet• Complying with standards: NF A 50-411 & NF A 50-710• Facade application:
- Aluminium framework system, bracket for vertically fastening aluminium pro les.
L Pack. Code40 100 611 05460 100 611 14080 100 611 025
100 100 611 199120 100 611 200140 50 611 061160 50 611 203180 50 611 202200 50 611 205220 50 611 207240 50 611 157
BRACKET WITHOUT CLIP FOR VENTILATED FACADE - HEIGHT 150 MM
• L : Length
T pro le, see page 619 - L pro le, see page 620Thermostop LR 150 wedge (code 611 014), see page 628 - BARACO FM 753 M10 anchor, see page 254BARACO FM 753 CRACK M10 anchor, see page 256 - MP3 M6-8-10 anchor, see page 245CHIMFORT GREEN M10 chemical anchor, see page 264CHIMFORT ATE M10 chemical anchor, see page 268
• Cross references :
40
150Opening5,5x25
Hole Ø 5,1
Aluminium 6060 T53 mm thickness
ISOLALU bracketLR 150 SP
• Complying with CSTB 3194 booklet• Complying with standards: NF A 50-411 & NF A 50-710• Facade application:
- Aluminium framework system, bracket for vertically fastening aluminium pro les.
L Pack. Code40 100 611 05760 100 611 14480 100 611 026
100 100 611 100120 100 611 064140 50 611 142160 50 611 153180 50 611 215200 50 611 156220 50 611 217240 50 611 143
Cge2011Chap12EN.indd 618 11/07/2012 14:42:18
FACALU ALUMINIUMFRAMEWORK SYSTEM
619Tel. +33 1 34 80 52 08 Fax +33 1 34 80 52 40 [email protected] www.etanco.eu2012
ALUMINIUM PROFILE FOR PRIMARY FRAMEWORK SYSTEM - LENGTH 3 OR 6 METERS
• Thick. : Thickness
ISOLALU LR 80, see page 616 - ISOLALU LR 150, see page 617Thermostop wedge (code 611 013 or 611 014), see page 628BARACO FM 753 M10 anchor, see page 254 - BARACO FM 753 CRACK M10 anchor, see page 256MP3 M6-8-10 anchor, see page 245 - CHIMFORT GREEN M10 chemical anchor, see page 264CHIMFORT ATE M10 chemical anchor, see page 268
• Cross references :
width
p
Aluminium 6060 T5FACALU PROFILE
T
• Complying with CSTB 3194 booklet• T shaped aluminium pro le with longitudinal chequering that stops any lm of water building up between the
outer skin and the aluminium structure.• Complying with standards: NF A 50-411 & NF A 50-710• Facade application:
- The T shaped pro le is used to link two plates- Fastening 2 mm thick aluminium pro les onto aluminium brackets: Alu / SS 5x12 rivets (code 270 540),
see page 189- Fastening 2.5 mm thick aluminium pro les onto aluminium brackets: PERFIX 5.5x25 screws (code
300 466), see page 80 or Alu / SS 5x12 rivets (code 270 540), see page 189
width x p Thick. Lg, (m) Pack. Code80 x 52 2 3 1 611 04880 x 52 2 6 1 611 04480 x 52 2,5 3 1 611 02480 x 52 2,5 6 1 611 027
110 x 52 2 3 1 611 029110 x 52 2 6 1 611 015110 x 52 2,5 3 1 611 168110 x 52 2,5 6 1 611 163
140 x 52 2 3 1 611 167140 x 52 2 6 1 611 127
150 x 52 2,5 3 1 611 370150 x 52 2,5 6 1 611 139
Cge2011Chap12EN.indd 619 11/07/2012 14:42:23
FACALU ALUMINIUMFRAMEWORK SYSTEM
620 Tel. +33 1 34 80 52 08 Fax +33 1 34 80 52 40 [email protected] www.etanco.eu 2012
ALUMINIUM PROFILE FOR PRIMARY FRAMEWORK SYSTEM - LENGTH 3 OR 6 METERS
ISOLALU LR 80, see page 616 - ISOLALU LR 150, see page 617Thermostop wedge (code 611 013 or 611 014), see page 628BARACO FM 753 M10 anchor, see page 254 - BARACO FM 753 CRACK M10 anchor, see page 256MP3 M6-8-10 anchor, see page 245 - CHIMFORT GREEN M10 chemical anchor, see page 264CHIMFORT ATE M10 chemical anchor, see page 268
• Cross references :
p widthAluminium 6060 T5
FACALU PROFILEL
• Complying with CSTB 3194 booklet• L shaped aluminium pro le with longitudinal chequering that stops any lm of water building up between the
outer skin and the aluminium structure.• Complying with standards: NF A 50-411 & NF A 50-710• Facade application:
- The L shaped pro le is used as the main rail and plate lateral edge.- Fastening 2 mm thick aluminium pro les onto aluminium brackets: Alu / SS 5x12 rivets (code 270 540),
see page 189- Fastening 2.5 mm thick aluminium pro les onto aluminium brackets: PERFIX 5.5x25 screws (code
300 466), see page 80 or Alu / SS 5x12 rivets (code 270 540), see page 189
width x p Thick. Lg, (m) Pack. Code50 x 42 2 3 1 611 03650 x 42 2 6 1 611 01650 x 42 2,5 3 1 611 04950 x 42 2,5 6 1 611 047
50 x 50 3 6 1 667 135
ALUMINIUM PROFILE FOR PRIMARY FRAMEWORK SYSTEM - LENGTH 5.2 METERS
• Thick. : Thickness
ISOLALU LR 80, see page 616 - ISOLALU LR 150, see page 617Thermostop wedge (code 611 013 or 611 014), see page 628BARACO FM 753 M10 anchor, see page 254 - BARACO FM 753 CRACK M10 anchor, see page 256MP3 M6-8-10 anchor, see page 245 - CHIMFORT GREEN M10 chemical anchor, see page 264CHIMFORT ATE M10 chemical anchor, see page 268
• Cross references :
60
40 Aluminium 6060 T5FACALU PROFILE
TUBE
• Complying with CSTB 3194 booklet• Complying with standards: NF A 50-411 & NF A 50-710• Facade application:
- The TUBE shaped pro le is used as the main rail and plate lateral edge.- Fastening 2.5 mm thick aluminium pro les onto aluminium brackets: PERFIX 5.5x25 screws (code
300 466), see page 80 or Alu / SS 5x12 rivets (code 270 540), see page 189
width x p Thick. Lg, (m) Pack. Code60 x 40 2,5 5,2 1 667 536
Cge2011Chap12EN.indd 620 11/07/2012 14:42:24
FACALU ALUMINIUMFRAMEWORK SYSTEM
621Tel. +33 1 34 80 52 08 Fax +33 1 34 80 52 40 [email protected] www.etanco.eu2012
ALUMINIUM PROFILE FOR SECONDARY FRAMEWORK SYSTEM - LENGTH 3 OR 6 METERS
• Thick. : Thickness
FACALU T 80/52 pro le, see page 619 - FACALU T 110/52 pro le (code 611 015), see page 619FACALU L 50/42 pro le, see page 620 - BARACO FM 753 M10 anchor, see page 254BARACO FM 753 CRACK M10 anchor, see page 256 - MP3 M6-8-10 anchor, see page 245CHIMFORT GREEN M10 chemical anchor, see page 264CHIMFORT ATE M10 chemical anchor, see page 268
• Cross references :
Aluminium 6060 T5OMEGA FACALU
100 / 29
• Complying with CSTB 3194 booklet• Complying with standards: NF A 50-411 & NF A 50-710• Facade application:
- The omega pro le is used as the secondary framework system with FACALU pro les- Fastening omega aluminium pro les onto aluminium T or L pro les: PERFIX 5.5x25 screws (code
300 466), see page 80 or Alu / SS 5x12 rivets (code 270 540), see page 189- Omega pro les can be used alone as primary framework system
width x p Thick. Lg, (m) Pack. Code100 x 29 2 3 1 611 037100 x 29 2 6 1 611 017100 x 29 2,5 3 1 611 382100 x 29 2,5 6 1 611 381
Cge2011Chap12EN.indd 621 11/07/2012 14:42:27
FACALU+ ALUMINIUMFRAMEWORK SYSTEM
622 Tel. +33 1 34 80 52 08 Fax +33 1 34 80 52 40 [email protected] www.etanco.eu 2012
CLIP BRACKET - HEIGHT 200 MM
FACALU+ pro le, see page 622 - FACALU+ pressure base, see page 623BARACO FM 753 M10 anchor, see page 254 - BARACO FM 753 CRACK M10 anchor, see page 256CHIMFORT GREEN M10 chemical anchor, see page 264CHIMFORT ATE M10 chemical anchor, see page 268
• Cross references :
Hole Ø 5,1
Opening5,5 x 25
Aluminium 6060 T5 - 4 mm thicknessISOLALU+ bracket
LR 200
• Complying with CSTB 3194 booklet• VERITAS test report No. 1947318 / 1A complying with Annex 1 CSTB 3194 booklet (January 2000)• Complying with standards: NF A 50-411 & NF A 50-710• For more informations, refer to our FACADE booklet.• Facade application:
- Aluminium framework system, bracket for vertically mounting aluminium pro les FACALU+- Two brackets per FACALU+ base
L Dn min. Dn max. Pack. Code80 120 140 50 611 178100 140 160 50 611 179120 160 180 50 611 180140 180 200 50 611 181160 200 220 25 611 182180 220 240 25 611 183200 240 260 25 611 184220 260 280 25 611 185240 280 300 25 611 186
Test Report
ALUMINIUM PROFILE FOR PRIMARY FRAMEWORK SYSTEM - LENGTH 3 OR 6 METERS
• Dnmaxi
: Maximum distance - Dnmini
: Minimum distance - Thick. : Thickness - L : Length
ISOLALU+ LR 200, see page 622 - FACALU+ pressure base, see page 623• Cross references :
Aluminium 6060 T5
PROFIL FACALU+
• Complying with CSTB 3194 booklet• VERITAS test report No. 1947318 / 1A complying with Annex 1 CSTB 3194 booklet (January 2000)• Complying with standards: NF A 50-411 & NF A 50-710• Facade application:
- Vertical pro le for butt mounting two slab sections- Aluminium pro les are screw mounted on the brackets: PERFIX 5.5x25 screws (code 300 466), see
page 80 or Alu / SS 5x12 rivets (code 270 540), see page 189
Lg, (m) Thick. Model For facing loads Pack. Code3 3 standard < 70 kg / m² 1 611 2506 3 standard < 70 kg / m² 1 611 169
3 3 medium < 50 kg / m² 1 611 158
Test Report
Cge2011Chap12EN.indd 622 11/07/2012 14:42:29
FACALU+ ALUMINIUMFRAMEWORK SYSTEM
623Tel. +33 1 34 80 52 08 Fax +33 1 34 80 52 40 [email protected] www.etanco.eu2012
FAÇALU+ PRESSURE BASE
• Thick. : Thickness - L : Length
ISOLALU+ LR 200, see page 622 - FACALU+ pro le, see page 622• Cross references :
Aluminium 6060 T5
FACALU+ PRESSURE BASE
• Complying with CSTB 3194 booklet• VERITAS test report No. 1947318 / 1A complying with Annex 1 CSTB 3194 booklet (January 2000)• Complying with standards: NF A 50-411 & NF A 50-710• Facade application:
- Anti-rotation pressure base for mounting FACALU+ brackets
L Thick. Pack. Code200 2 50 611 161
Test Report
Cge2011Chap12EN.indd 623 11/07/2012 14:42:31
INVISIBLE FIXING SYSTEMS
624 Tel. +33 1 34 80 52 08 Fax +33 1 34 80 52 40 [email protected] www.etanco.eu 2012
INVERTED C RAIL - LENGTH 3 METERS
Standard staple, see page 624 - Adjustable staple, see page 624• Cross references :
Aluminium 6060 T5
INVERTED C RAIL
• Complying with standards: NF A 50-411 & NF A 50-710• Facade application:
- Invisible fastening for at products on façades
Lg, (m) Thick. Pack. Code3 2 1 611 365
STANDARD STAPLE
Inverted C rail, see page 624 - Stainless steel blind bolt TB12 6x11.5 (code 611 130), see page 630Per x hex head stainless steel bolt (code 300 466), see page 80
• Cross references :
Aluminium 6060 T5
STANDARD STAPLE
• Complying with standards: NF A 50-411 & NF A 50-710• Facade application:
- Invisible fastening for at products on façades
L Thick. Pack. Code50 2 1 662 688
ADJUSTABLE STAPLE AND FIXED POINT
• Thick. : Thickness - L : Length
Inverted C rail, see page 624 - Stainless steel blind bolt TB12 6x11.5 (code 611 130), see page 630Hex head stainless steel metal screw (code 69 288), see page 307
• Cross references :
Aluminium 6060 T5
ADJUSTABLE STAPLE
• Complying with standards: NF A 50-411 & NF A 50-710• Facade application:
- Invisible fastening for at products on facades
L Thick. Pack. Code50 2 1 662 689
Cge2011Chap12EN.indd 624 11/07/2012 14:42:31
INVISIBLE FIXING SYSTEMS
625Tel. +33 1 34 80 52 08 Fax +33 1 34 80 52 40 [email protected] www.etanco.eu2012
C+ RAIL - LENGTH 3 METERS
STAPLE Standard C+, see page 625 - STAPLE Adjustable C+, see page 625• Cross references :
Aluminium 6060 T5
C+ RAIL
• Complying with standards: NF A 50-411 & NF A 50-710• Facade application:
- Invisible fastening for at products on facades
Lg, (m) Thick. Pack. Code3 3 1 611 368
STANDARD STAPLE
Inverted C rail, see page 624 - Blind stainless steel screws TB12 6x11.5 (code 611 130), see page 630Per x hex head stainless steel bolts (code 300 466), see page 80
• Cross references :
Aluminium 6060 T5
STANDARD C+ STAPLE
• Complying with standards: NF A 50-411 & NF A 50-710• Facade application:
- Invisible fastening for at products on facades
L Thick. Pack. Code50 3 1 611 099
ADJUSTABLE STAPLE AND FIXED POINT
• Thick. : Thickness - L : Length
Inverted C rail, see page 624 - Stainless steel blind bolt TB12 6x11.5 (code 611 130), see page 630Stainless steel hex head metal screw (code 69 288), see page 307
• Cross references :
Aluminium 6060 T5
ADJUSTABLE C+ STAPLE
• Complying with standards: NF A 50-411 & NF A 50-710• Facade application:
- Invisible fastening for at products on facades
L Thick. Pack. Code50 3 1 611 058
Cge2011Chap12EN.indd 625 11/07/2012 14:42:33
TRESPA ALUMINIUMDOUBLE FRAMEWORK SYSTEM
626 Tel. +33 1 34 80 52 08 Fax +33 1 34 80 52 40 [email protected] www.etanco.eu 2012
TRESPA TS 200 MAIN RAIL
Standard lug TS 200 (code 611 093), see page 626 - Adjustable lug TS 200 (code 611 094), see page 626Hex head stainless steel metal screw 8x25 (code 69 336), see page 307Per x hex head stainless steel screw 5.5x25 (code 300 466), see page 80
• Cross references :
Aluminium 6060 T5
PROFILE TS 200
• Complying with standards: NF A 50-411 & NF A 50-710• For more informations, refer to our FACADE booklet.• Facade application:
- The TRESPA TS 200 pro le is used as the main rail
Lg, (m) Pack. Code3 1 611 091
STANDARD LUG WITHOUT TAPPING FOR ATTACHMENT OF MAIN RAIL TS 200
Pack. Code1 611 093
Aluminium 6060 T5
TS 200 STANDARD LUG
• Complying with standards: NF A 50-411 & NF A 50-710
ADJUSTABLE LUG WITH TAPPING FOR ATTACHING TS 200 MAIN RAIL
Pack. Code1 611 094
Aluminium 6060 T5
TS 200 ADJUSTABLE LUG
• Complying with standards: NF A 50-411 & NF A 50-710• Facade application:
- Adjustable lug with tapping for adjustment on the TS 200 main rail. Can also be used as the xed point lug.
Hex head stainless steel metal screw 8x25 (code 69 336), see page 307Per x hex head stainless steel screw 5.5x25 (code 300 466), see page 80
• Cross references :
Cge2011Chap12EN.indd 626 11/07/2012 14:42:37
TRESPA ALUMINIUMDOUBLE FRAMEWORK SYSTEM
627Tel. +33 1 34 80 52 08 Fax +33 1 34 80 52 40 [email protected] www.etanco.eu2012
TRESPA TSP 301 STARTING RAILAluminium 6060 T5
PROFILE TSP 301
• Complying with standards: NF A 50-411 & NF A 50-710• Facade application:
- The TRESPA TSP 301 pro le is used as the starting rail
Lg, (m) Pack. Code3,6 1 611 101
MAIN RAIL WITH TRESPA TSP 302 SEALAluminium 6060 T5
PROFILE TSP 302
• Complying with standards: NF A 50-411 & NF A 50-710• Facade application:
- The TRESPA TSP 302 pro le is used as the main rail and the upper stop.
Lg, (m) Pack. Code3,6 1 611 102
PROFILE FOR TRESPA TSP 305 BUTT FITTINGAluminium 6060 T5
PROFILE TSP 305
• Complying with standards: NF A 50-411 & NF A 50-710• Facade application:
- The TRESPA TSP 305 pro le is used to butt t rails together. To be cut to 200 mm lengths on-site.
Lg, (m) Pack. Code3,6 1 611 106
TRESPA TSP 306 STARTING RAILAluminium 6060 T5
PROFILE TSP 306
• Complying with standards: NF A 50-411 & NF A 50-710• Facade application:
- The TRESPA TSP 306 pro le is used as the rst rail on a timber frame. To be cut to length on-site.
Lg, (m) Pack. Code6 1 611 107
Cge2011Chap12EN.indd 627 11/07/2012 14:42:41
ACCESSORY forVENTILATED FACADE SYSTEM
628 Tel. +33 1 34 80 52 08 Fax +33 1 34 80 52 40 [email protected] www.etanco.eu 2012
THERMAL BREAK WEDGE
ISOLALU LR 80, see page 616 - ISOLALU LR 150, see page 617• Cross references :
Blue polypropylene
THERMOSTOP wedge
• Complying with CSTB 3194 booklet• Facade application:
- A plastic wedge for making a thermal break between the base and the aluminium bracket.
width Thick. For ISOLALU Pack. Code44 6 LR 80 100 611 01344 6 LR 150 100 611 014
GALVANIC INSULATION CLIP
BARACO FM 753 M10 anchor, see page 254 - BARACO FM 753 CRACK M10 anchor, see page 256MP3 M6-8-10 anchor, see page 245 - CHIMFORT GREEN M10 chemical anchor, see page 264CHIMFORT ATE M10 chemical anchor, see page 268
• Cross references :
Blue polypropylene
THERMOSTOP CLIP
• Recommended accessory for mounting brackets on load bearing walls• Facade application:
- Clip that ensures electrolitic break between the BARACO or CHIMFORT anchoring system and the aluminium bracket.
Hole Ø Pack. Code10,7 100 611 018
BEARING WASHER
• Thick. : Thickness - Hole Ø : Hole diameter
BARACO FM 753 M10 anchor, see page 254 - BARACO FM 753 CRACK M10 anchor, see page 256MP3 M6-8-10 anchor, see page 245 - CHIMFORT GREEN M10 chemical anchor, see page 264CHIMFORT ATE M10 chemical anchor, see page 268
• Cross references :
Austenitic stainless steelA2 Aisi 304
FLAT WASHER / SS A2
• Recommended accessory for mounting brackets on load bearing walls• Facade application:
- Plain washer when using BARACO or MARCOVIS anchors- Plain washer that ensures electrolitic break between carbon steel and aluminium
Ext. Ø Hole Ø Thick. Pack. Code22 10,25 2 100 71 291
Cge2011Chap12EN.indd 628 11/07/2012 14:42:46
ACCESSORY forVENTILATED FACADE SYSTEM
629Tel. +33 1 34 80 52 08 Fax +33 1 34 80 52 40 [email protected] www.etanco.eu2012
DRILL CENTERING TOOL
HSS drill bits, see page 669• Cross reference :
DRILL CENTRING TOOLML 1000
• Drill bush used to centre the 5 and 8 mm dia. hole centres.• Facade application:
- Used for mounting facade plates on FACALU ALUMINIUM frames.
Model Pack. CodeCentring tool ML 1000 1 284 000
SPECIAL NOSE FOR FACADE PANEL
ACCUBIRD wireless riveter (code 273 450), see page 675 - LR 5 reveter (code 273 330), see page 672LR 20 riveter (code 273 325), see page 672
• Cross references :
RIVETER NOSE
• Facade application:- Accessory specially designed for mechanically attaching facade panels to ensure that the necessary
space is left for material expansion.
For riveter Thread length. Pack. CodeACCUBIRD 8 1 611 111
LR 5 - LR 20 13 1 611 110
FLEXIBLE ADHESIVE BANDAcrylic adhesive
ADHESIVE BAND
• Facade application:- Black tape obscuring the aluminum pro l between two panels
Colour Width Roll lg. (ml) No. rolls Pack. (m) CodeBlack 40 10 8 80 611 750Black 80 25 2 50 611 307Black 100 25 2 50 611 319Black 120 25 2 50 611 327
Cge2011Chap12EN.indd 629 11/07/2012 14:42:49
ACCESSORY forVENTILATED FACADE SYSTEM
630 Tel. +33 1 34 80 52 08 Fax +33 1 34 80 52 40 [email protected] www.etanco.eu 2012
BLIND SCREW, ROUND HEAD 12 MM DIA - FLAT POINT - TORX 30 PATTERN
STAPLE Standard, see page 624 - STAPLE Adjustable, see page 624STAPLE Standard C+, see page 625 - STAPLE Adjustable C+, see page 625
• Cross references :
L
TX 30
Austenitic stainless steelA2 Aisi 304
BLIND SCREW TB TX30SS A2
• Complying with CSTB 3194 booklet• Facade application:
- Screw for holding standard or adjustable staples onto at facade products
Ø x L Pattern Pack. Code6 x 9,5 Torx 30 200 611 1286 x 11,5 Torx 30 200 611 1306 x 14,5 Torx 30 200 611 132
HEX. HEAD METAL SCREW - DIN 933
Inverted C RAIL, see page 624 - STAPLE Adjustable, see page 624 - RAIL C+, see page 625STAPLE Adjustable C+, see page 625 - Adjustable lug TS 200 (code 611 094), see page 626
• Cross references :
Austenitic stainless steelA2 Aisi 304
METAL SCREW THSS A2
• Complying with CSTB 3194 booklet• Facade application:
- Adjustment screws used for setting adjustable staples on inverted C or C+ rails
M x L H Pack. Code6 x 10 10 200 69 288
8 x 25 13 100 69 336
SELF DRILLING SCREW HEX. HEAD
• CP on Alu : Drilling capacity into aluminium (minimum / maximum) - Pattern : Bit drive recess - H : Hex. drive - L : Length
Inverted C RAIL, see page 624 - STAPLE Standard, see page 624 - RAIL C+, see page 625STAPLE Standard C+, see page 625 - Adjustable lug TS 200 (code 611 094), see page 626
• Cross references :
Austenitic stainless steelA2 Aisi 304PERFIX TH
SS A2
• Complying with CSTB 3194 booklet• Facade application:
- Blocking screws for adjustable staples on inverted C or C+ rails
Ø x L CP on Alu H Pack. Code5,5 x 25 1.75 to 3 8 500 300 466
Cge2011Chap12EN.indd 630 11/07/2012 14:42:53
STONE CLADDING ATTACHMENT
631Tel. +33 1 34 80 52 08 Fax +33 1 34 80 52 40 [email protected] www.etanco.eu2012
TUB CONTAINING 50 KITS: ADJUSTABLE SECURED SYSTEM 3 MM THICKNESS
BARACO FM 753 anchor / SS A4 M8 (code 344 221), see page 254BARACO FM 753 CRACK anchor / SS A4 M8, see page 256CHIMFORT GREEN M8 stainless rod chemical anchor, see page 264CHIMFORT ATE M8 stainless rod, see page 268 - Drill bit, concrete 8 mm, see page 681Contact washer / SS A2 (code 77 000), see page 504
• Cross references :
Adjusment possible
Ht
Adj
usm
ent
poss
ible
Stone Stone Concrete Concrete Stone Air space Concrete
3 mm
Gap
Austenitic stainless steelA2 Aisi 304 - 3 mm thickness
+ PVCModel SRM / SS A2
3 mm thick.
• Complying with DTU 55.2• CSTB Technical Report No. 1/05-827• A tub comprises:
- 50 lug bodies made of A2 stainless steel, 30x3 mm section with M 10 crimped nut (17 mm Hex.) free to rotate
- 50 Rod with M 10 at, non-removable, made of A2 stainless steel- 50 lugs with A2 stainless steel anges- 50 blind sliding sleeves made of rigid PVC
• For more informations, refer to our FACADE booklet.• Facade application:
- Fastening stone cladding to the facade
Type Rod length Ht Gap Bucket of CodeSRM 0 50 3 15 - 25 50 362 303SRM 0 60 3 15 - 35 50 362 301
SRM 15 50 15 30 - 40 50 362 305SRM 20 60 20 35 - 55 50 362 307SRM 40 60 40 55 - 75 50 362 309SRM 60 80 60 77 - 114 50 362 311SRM 80 80 80 100 - 137 50 362 313SRM 100 80 100 120 - 157 50 # 362 315
(#) Boxed
TUB CONTAINING 50 KITS: ADJUSTABLE SECURED SYSTEM 4 MM THICKNESS
BARACO FM 753 anchor / In A4 M8 (code 344 221), see page 254BARACO FM 753 CRACK anchor / In A4 M8, see page 256CHIMFORT GREEN M8 stainless rod chemical anchor, see page 264CHIMFORT ATE M8 stainless rod, see page 268 - Drill bit, concrete 8 mm, see page 681Contact washer / SS A2 (code 77 000), see page 504
• Cross references :
4 mm
Austenitic stainless steelA2 Aisi 304 - 4 mm thickness
+ PVCSRM model / SS A2
4 mm thick.
• Complying with DTU 55.2• CSTB Technical Report No. 1/05-827• A Bucket comprises:
- 50 lug bodies made of A2 stainless steel, 30x4 mm section with M 12 crimped nut (19 mm Hex.) free to rotate
- 50 Rod with M 12 at, non-removable, made of A2 stainless steel- 50 lugs with A2 stainless steel anges- 50 blind sliding sleeves made of rigid PVC
• For more informations, refer to our FACADE booklet.• Facade application:
- Fastening stone cladding to the facade
Type Rod length Ht Gap Bucket of CodeSRM 60 80 60 77 - 114 50 362 501SRM 80 80 80 100 - 137 50 362 503SRM 100 80 100 120 - 157 50 # 362 505SRM 120 80 120 140 - 177 50 # 362 507SRM 150 80 150 170 - 207 50 # 362 509
(#) Boxed
Cge2011Chap12EN.indd 631 11/07/2012 14:42:55
STONE CLADDING ATTACHMENT
632 Tel. +33 1 34 80 52 08 Fax +33 1 34 80 52 40 [email protected] www.etanco.eu 2012
BUCKET CONTAINING 50 KITS: ADJUSTABLE SYSTEM 3 MM THICKNESS
BARACO FM 753 anchor / In A4 M8 (code 344 221), see page 254BARACO FM 753 CRACK anchor / In A4 M8, see page 256CHIMFORT GREEN M8 stainless rod chemical anchor, see page 264CHIMFORT ATE M8 stainless rod, see page 268 - Drill bit, concrete 8 mm, see page 681Contact washer / SS A2 (code 77 000), see page 504
• Cross references :
3 mm
Austenitic stainless steelA2 Aisi 304 - 3 mm thickness
+ PVCModel SR / SS A2
3 mm thick.
• A Bucket comprises:- 50 lug bodies made of A2 stainless steel, 30x3 mm section with M 10 crimped nut (17 mm Hex.) free to
rotate- 50 Rod with M 10 at, A2 stainless, not tted- 50 lugs with A2 stainless steel anges- 50 blind sliding sleeves made of rigid PVC
• Facade application:- Fastening stone cladding to the facade
Type Rod length Ht Gap Bucket of CodeSR 0 50 3 15 - 25 50 362 403SR 15 50 15 30 - 40 50 362 405SR 20 60 20 35 - 55 50 362 407SR 40 60 40 55 - 75 50 362 409SR 60 80 60 77 - 114 50 362 411SR 80 80 80 100 - 137 50 362 413
SR 100 80 100 120 - 157 50 # 362 415
(#) Boxed
BOX CONTAINING 25 KITS: ADJUSTABLE CAULKED SYSTEM 3 MM THICKNESS
• Ht : Height
BARACO FM 753 anchor / In A4 M8 (code 344 221), see page 254BARACO FM 753 CRACK anchor / In A4 M8, see page 256CHIMFORT GREEN M8 stainless rod chemical anchor, see page 264CHIMFORT ATE M8 stainless rod, see page 268 - Drill bit, concrete 8 mm, see page 681Contact washer / SS A2 (code 77 000), see page 504
• Cross references :
3 mm
Austenitic stainless steelA2 Aisi 304 - 3 mm thickness
+ PVCModel VRM / SS A2
3 mm thick.
• Complying with DTU 55.2• A box comprises:
- 25 lug bodies made of A2 stainless steel, 30x3 mm section with M 10 crimped nut (17 mm Hex.) free to rotate
- 25 Rod with M 10 at, non-removable, made of A2 stainless steel- 25 lugs with A2 stainless steel anges- 25 blind sliding sleeves made of rigid PVC
• Facade application:- Fastening stone cladding to the facade
Type Rod length Ht Gap Carton of CodeVRM 0 50 3 15 - 25 25 660 016
VRM 15 50 15 30 - 40 25 660 168VRM 20 60 20 35 - 55 25 664 508VRM 40 60 40 55 - 75 25 664 651VRM 60 80 60 77 - 114 25 663 921VRM 80 80 80 100 - 137 25 660 245
Cge2011Chap12EN.indd 632 11/07/2012 14:42:59
STONE CLADDING ATTACHMENT
633Tel. +33 1 34 80 52 08 Fax +33 1 34 80 52 40 [email protected] www.etanco.eu2012
CONTACT WASHER
BARACO FM 753 anchor / In A4 M8, see page 254Drill bit, concrete 8 mm, see page 681
• Cross references :
Austenitic stainless steelA2 Aisi 304 - 1.4 mm thickness
CONTACT WASHER / SS A2
• Complying with DTU 55.2• Facade application:
- Used with BARACO anchors for fastening lugs onto a main wall
Ext. Ø Hole Ø Pack. Code18 8 50 77 000
FLATTENED THREADED ROD WITH FLAT FOR SR MODEL
• L : Length - Hole Ø : Hole diameter
SR lugs, see page 632 - Flanged pin (code 361 979), see page 634Blind sleeve (code 361 871), see page 634
• Cross references :
Austenitic stainless steelA2 Aisi 304 or A4 Aisi 316
FLATTENED ROD / SS
• Facade application:- Rod that ts the SR model lug for fastening stone cladding to the facade
M x L Stainless quality Pack. Code10 x 50 A2 - AISI 304 50 35 86410 x 60 A2 - AISI 304 50 35 86510 x 80 A2 - AISI 304 50 35 86710 x 100 A2 - AISI 304 50 35 90010 x 120 A2 - AISI 304 50 35 91010 x 150 A2 - AISI 304 50 35 914
12 x 60 A2 - AISI 304 50 362 00612 x 80 A2 - AISI 304 50 35 923
10 x 50 A4 - AISI 316 50 35 95010 x 60 A4 - AISI 316 50 35 95510 x 80 A4 - AISI 316 50 35 96010 x 120 A4 - AISI 316 50 35 964
Cge2011Chap12EN.indd 633 11/07/2012 14:43:06
STONE CLADDING ATTACHMENT
634 Tel. +33 1 34 80 52 08 Fax +33 1 34 80 52 40 [email protected] www.etanco.eu 2012
LUG WITH STONE EDGE TAKE-UP FLANGE
Flattened threaded rods, see page 633 - SR lugs, see page 632Blind sleeve (code 361 871), see page 634
• Cross references :
Austenitic stainless steelA2 Aisi 304 or A4 Aisi 316
FLANGED LUG / SS
• Complying with DTU 55.2• CSTB Technical Report No. 1/05-827• Facade application:
- Lug with ange for tting stone to edges, ts a attened rod.
Ø x L Stainless quality Pack. Code5 x 70 A2 - AISI 304 50 361 979
5 x 70 A4 - AISI 316 50 35 952
LUG WITH STONE EDGE CLOSER
Flattened threaded rods, see page 633 - SR lugs, see page 632Blind sleeve (code 361 871), see page 634
• Cross references :
Austenitic stainless steelA4 Aisi 316
LUG / SS A4
• Facade application:- Lug for tting stone to edges, ts a attened rod.
Ø x L Pack. Code5 x 70 50 35 951
BLIND ANTI-VIBRATION SLEEVE
• L : Length
Flanged lug (code 361 979), see page 634 - Flattened threaded rods, see page 633SR lugs, see page 632
• Cross references :
Low density polyethylene
BLIND SLEEVE / PE
• Complying with DTU 55.2• CSTB Technical Report No. 1/05-827• Facade application:
- Blind sleeve that ts a 5x70 lug to avoid transmitting vibration.
Ø x L Pack. Code7 x 40 50 361 871
Cge2011Chap12EN.indd 634 11/07/2012 14:43:08
STONE CLADDING ATTACHMENT
635Tel. +33 1 34 80 52 08 Fax +33 1 34 80 52 40 [email protected] www.etanco.eu2012
C-RAIL FRAMEWORK SYSTEMC-RAIL DRILLED WITH OBLONG HOLES - LENGTH 3 OR 6 METERS
SRM 0 RAIL lugs, see page 636 - Hex head metal screws 8x20 stainless (code 69 335), see page 307Stainless washer (code 71 921), see page 503 - Stainless rail nut (code 362 821), see page 636
• Cross references :
Austenitic stainless steelA2 Aisi 304
C RAIL / SS A2
• Oblong 28 x 14 mm holes every 50 mm• Austenitic A4 Aisi 316 stainless steel on request• Can be cut to length on request• Facade application:
- C rail framework system for fastening stone cladding to the facade
Section Thick. Pack. (m) Code41 x 21 2,5 3 660 43141 x 21 2,5 6 660 017
41 x 41 2,5 3 661 83941 x 41 2,5 6 660 018
SRM 0 RAIL lugs, see page 636 - Hex head metal screws 8x20 stainless (code 69 335), see page 307Stainless washer (code 71 921), see page 503 - Stainless rail nut (code 362 821), see page 636
• Cross references :
Galvanized steel
RAIL C / Ga
• Oblong 28 x 14 mm holes every 50 mm• Can be cut to length on request• Facade application:
- C rail framework system for fastening stone cladding to the facade
Section Thick. Pack. (m) Code41 x 21 2,5 3 664 32041 x 21 2,5 6 661 751
41 x 41 2,5 3 661 83341 x 41 2,5 6 661 822
FASTENED STONE DRILL GUIDE
• Thick. : Thickness
DRILLSTONE
• Complying with DTU 55.2• Facade application:
- Drill guid for fastening stones onto facades complying with DTU 55.2
Model Pack. CodeSwiveling 1 367 000
Stationary 1 367 010
Cge2011Chap12EN.indd 635 11/07/2012 14:43:10
STONE CLADDING ATTACHMENT
636 Tel. +33 1 34 80 52 08 Fax +33 1 34 80 52 40 [email protected] www.etanco.eu 2012
C-RAIL FRAMEWORK SYSTEMBUCKET CONTAINING 50 KITS: ADJUSTABLE SECURED SYSTEM 3 MM THICKNESS FOR RAIL C
3 mm
Austenitic stainless steelA2 Aisi 304
+ PVCModel SRM 0 RAIL / SS A2
3 mm thick.
• Complying with DTU 55.2• A Bucket comprises:
- 50 lug bodies made of A2 stainless steel, 40x3 mm section with crimped M 10 nut (free to rotate)- 50 Rod with M 10 at, not removable, made of A2 stainless steel- 50 lugs with anges, made of A2 stainless steel- 50 blind sliding sleeves made of rigid PVC- 50 rail nuts, made of stainless steel (code 362 821)- 50 hex head 8x20 bolts, made of stainless steel (code 69 335)- 50 fan washers, made of stainless steel (code 73 130)- 50 tightening washers, made of stainless steel (code 71 921)
• Max. load: 35 daN• For more informations, refer to our FACADE booklet.• Facade application:
- C rail framework system for fastening stone cladding to the facade
Type Ht Gap Rod with at Bucket of CodeSRM 0 RAIL 3 15 - 35 M 10 x 60 50 362 299
WIDE WASHER FOR ATTACHING SRM 0 LUG TO C RAIL
Hex head metal screws 8x20 stainless (code 69 335), see page 307Fan washer, stainless (code 73 130), see page 503 - Stainless rail nut (code 362 821), see page 636
• Cross references :
Austenitic stainless steelA2 Aisi 304
WIDE WASHER 8 / SS A2
• Facade application:- Wide washer for attaching SRM 0 lug to C rail
Ext. Ø Hole Ø Pack. Code22 8,5 200 71 921
M 8 TAPPED RAIL HOLE FOR ATTACHING SRM 0 LUG TO C RAIL
• Ht : Height - Hole Ø : Hole diameter
C RAIL / SS A2, see page 635 - SRM 0 lugs, see page 631Hex head metal screws 8x20 stainless (code 69 335), see page 307
• Cross references :
Austenitic stainless steelA2 Aisi 304
RAIL NUT / SS A2
• Facade application:- M8 tapped rail hole for attaching SRM 0 lug to C rail
Hole Ø Pack. CodeM 8 50 362 821
Cge2011Chap12EN.indd 636 11/07/2012 14:43:13
STONE CLADDING ATTACHMENT
637Tel. +33 1 34 80 52 08 Fax +33 1 34 80 52 40 [email protected] www.etanco.eu2012
C-RAIL FRAMEWORK SYSTEMRODENT-PROOF GRILLE - LENGTH 1 METER
TAP-LARGE 6/10x40 anchor (Zn code 359 130) or (SS A2 code 359 091), see page 224Drill bits, concrete, see page 680
• Cross references :
B A
Galvanized carbon steelRODENT-PROOF
GRILLE / Ga
• Other widths available on request• Facade application:
- Start section for ventilated facade
A B Pack. Code30 40 1 666 37730 50 1 666 37630 60 1 666 37530 70 1 666 37430 80 1 666 37330 90 1 666 37230 100 1 666 37130 110 1 666 37030 120 1 666 36930 130 1 666 36830 140 1 666 36730 150 1 666 36630 160 1 666 36530 170 1 666 36430 180 1 666 36330 190 1 666 36230 200 1 666 36130 210 1 666 36030 220 1 666 35930 230 1 666 35830 240 1 666 35730 250 1 666 35630 260 1 666 355
ANCHOR LUG SPECIALLY FOR MASSIVE STONEAustenitic stainless steel
A2 Aisi 304
CARRIER LUG / SS A2
• Use with lug Ø8 x 100 (code 361 816) on request• Facade application:
- Special lug for massive stone
Model Pack. CodeOn request 1 Ask us
Cge2011Chap12EN.indd 637 11/07/2012 14:43:18
STONE CLADDING ATTACHMENTWITHOUT INSULATION
638 Tel. +33 1 34 80 52 08 Fax +33 1 34 80 52 40 [email protected] www.etanco.eu 2012
ANCHORED STONE ATTACHMENTZAMAC IMPACT EXPANSION ANCHOR
Zintane wire (code 603 039), see page 638 - LR STONE mastic, see page 453Drill bits, special for stone, 5 mm (code 361 925), see page 688AKEMI glue (code 361 805), see page 639
• Cross references :
ZAMAC 3 alloy
ZACFIX
• SOCOTEC speci cation No. MX 0427• Complying with DTU 55.2• Facade application:
- Fastening stone cladding without insulation using a anchor + zintane wire system
Ø x L d0
h1
Pack. type Quantity Code10 x 42 10 40 Bag 100 603 04010 x 42 10 40 Bucket 500 603 042
WIRE TYPE MECHANICAL ATTACHMENT
• d0 : Support drilling diameter - h
1 : Support drilling depth - L : Length
ZACFIX anchors, see page 240 - LR STONE mastic, see page 453Drill bits, special for stone, 5 mm (code 361 925), see page 688AKEMI glue (code 361 805), see page 639
• Cross references :
Zintane 42(Zinc / copper / titanium)
ZINTANE WIRE
• For normal use: Approx. 600 ZACFIX anchors per 25 Kg reel• Facade application:
- Fastening stone cladding without insulation using a anchor + zintane wire system
Ø L approx. Reel Code4,76 190 m 25 Kg 603 039
Cge2011Chap12EN.indd 638 11/07/2012 14:43:23
GLUE SYSTEM
639Tel. +33 1 34 80 52 08 Fax +33 1 34 80 52 40 [email protected] www.etanco.eu2012
GLUE FOR STONE ASSEMBLY
Colouring products (code 361 809), see page 639 - Hardener (code 361 830), see page 639AKEPOX glues, see page 639
• Cross references :
THICK AKEMIGLUE
• Hardens cold, does not darken, can be polished.• Other colours on request• Facade application:
- Glue for assembling, gluing and sealing natural stone on vertical surfaces.
Glue colour Can (ml) Pack. CodeTranslucid 1000 1 361 805
COLOURING PRODUCTS FOR AKEMI POLYESTER GLUESColouring products
ASSORTED COLOURING PRODUCTS
• Facade application:- Colouring products for AKEMI polyester glues
Nbr. of tubes Tube (ml) Box* Code8 colours 30 1 361 809
(*) Box of eight assorted 30 ml tubes: Ochre - White - Red brown - Red - Brown - Green - Blue - Black
HARDENER FOR AKEMI GLUEWhite dibenzoyl peroxyde paste
AKEMI HARDENER
• Facade application:- Hardener for AKEMI polyester glue
Tube (gr) Pack. Code60 1 361 830
GLUE FOR ANCHORING IN STONEEpoxy resin glue in 2 parts
beige-grey
AKEPOX GLUE
• Facade application:- Glue for anchoring in stone
Glue type Can (gr) Pack. CodeAKEPOX 2020 750 1 361 793AKEPOX 2040 750 1 361 792
Cge2011Chap12EN.indd 639 11/07/2012 14:43:26
FUNERAL MONUMENT ATTACHMENTS
640 Tel. +33 1 34 80 52 08 Fax +33 1 34 80 52 40 [email protected] www.etanco.eu 2012
MARBLEWORK COMPLETE BRACKET ASSEMBLY
Carton of Code25 bags 362 101
Sherardized steelCarbon steel
MONUMENTAL MASON’S KIT
• Kit in a bag comprising:- Four 80 x 80 x 35 mm / 2 mm thickness sherardized steel brackets
(with two openings: 50 x 10 and 50 x 20 mm)- Four 29 mm diameter 3 mm thickness sherardized steel centering washers
(with 10 mm dia. Off-centred hole)- 8 BARACO 8 x 50 mm carbon steel anchors with nuts and washers
Cge2011Chap12EN.indd 640 11/07/2012 14:43:30
BRICK MASONRYSUPPORT SYSTEM
641Tel. +33 1 34 80 52 08 Fax +33 1 34 80 52 40 [email protected] www.etanco.eu2012
Opening 12 x 90
Anchor
Console heel
Plateadjustment
Standard angle brackets, see page 641 - Return angle brackets, see page 642Angle brackets, see page 643 - Angle bars, see page 642 - Renovco 69, see page 644
• Cross references :
Austenitic stainless steelA2 Aisi 304
Hot dip galvanized steel
LR BRICKAdjusting plate / SS A2
LR BRICKAdjusting plate / HdG
Pack. Code Pack. Code1 344 650 1 344 600
• Variable height depending on adjustment plate sideways movement.• For more informations, refer to our FACADE booklet.• Facade application:
- System for supporting bricks for lining masonry
LR BRICK SYSTEM WITH ADJUSTABLE ANGLE BRACKETANGLE BRACKET ADJUSTING PLATE
Adjusting plate, see page 641 - BARACO FM 753 anchor / SS A4 M12, see page 254BARACO FM 753 CRACK anchor / SS A4 M12, see page 256 - Return angle brackets, see page 642Angle brackets, see page 643 - Angle bar brackets, see page 642 - Renovco 69, see page 644
• Cross references :
Austenitic stainless steelA2 Aisi 304
Hot dip galvanized steel
LR BRICK Std.angle bracket / SS A2
LR BRICK Std.angle bracket / HdG
Dn min. Dn max. Pack. Code Pack. Code120 140 1 345 200 1 345 250140 160 1 345 201 1 345 251160 180 1 345 202 1 345 252180 200 1 345 203 1 345 253200 220 1 345 204 1 345 254220 240 1 345 205 1 345 255240 260 1 345 206 1 345 256260 280 1 345 207 1 345 257280 300 1 345 208 1 345 258300 320 1 345 209 1 345 259
• Complying with DTU 20.1• Facade application:
- System for supporting bricks for lining masonry
• Dnmaxi
: Maximum distance - Dnmini
: Minimum distance
STANDARD ANGLE BRACKET
Cge2011Chap12EN.indd 641 11/07/2012 14:43:32
BRICK MASONRYSUPPORT SYSTEM
642 Tel. +33 1 34 80 52 08 Fax +33 1 34 80 52 40 [email protected] www.etanco.eu 2012
Adjusting plate, see page 641 - BARACO FM 753 anchor / SS A4 M12, see page 254BARACO FM 753 CRACK anchor / SS A4 M12, see page 256 - Standard angle brackets, see page 641Angle brackets, see page 643 - Angle bars, see page 642 - Renovco 69, see page 644
• Cross references :
Austenitic stainless steelA2 Aisi 304
Hot dip galvanized steel
LR BRICK Returnangle bracket / SS A2
LR BRICK Returnangle bracket / HdG
Dn min. Dn max. Pack. Code Pack. Code120 140 1 345 220 1 345 290140 160 1 345 221 1 345 291160 180 1 345 222 1 345 292180 200 1 345 223 1 345 293200 220 1 345 224 1 345 294220 240 1 345 225 1 345 295240 260 1 345 226 1 345 296260 280 1 345 227 1 345 297280 300 1 345 228 1 345 298300 320 1 345 229 1 345 299
• Complying with DTU 20.1• Facade application:
- System for supporting bricks for lining masonry
LR BRICK SYSTEM WITH ADJUSTABLE ANGLE BRACKETRETURN ANGLE BRACKET
Standard angle brackets, see page 641 - Return angle brackets, see page 642Angle brackets, see page 643 - Renovco 69, see page 644
• Cross references :
Austenitic stainless steelA2 Aisi 304
Hot dip galvanized steel
LR BRICKAngle bar / SS A2
LR BRICKAngle bar / HdG
L Section Pack. Code Pack. Code440 93x40x4 1 344 681 1 344 631670 93x40x4 1 344 682 1 344 632900 93x40x4 1 344 683 1 344 633
• Complying with DTU 20.1• Facade application:
- System for supporting bricks for lining masonry
• Dnmaxi
: Maximum distance - Dnmini
: Minimum distance - L : Length
BRICK SUPPORT ANGLE BAR
Cge2011Chap12EN.indd 642 11/07/2012 14:43:39
BRICK MASONRYSUPPORT SYSTEM
643Tel. +33 1 34 80 52 08 Fax +33 1 34 80 52 40 [email protected] www.etanco.eu2012
Adjusting plate, see page 641 - BARACO FM 753 anchor / SS A4 M12, see page 254BARACO FM 753 CRACK anchor / SS A4 M12, see page 256 - Standard angle brackets, see page 641Return angle brackets, see page 642 - Angle bars, see page 642 - Renovco 69, see page 644
• Cross references :
Austenitic stainless steelA2 Aisi 304
Hot dip galvanized steel
LR BRICK Cornerangle bar / SS A2
LR BRICK Cornerangle bar / HdG
Dn min. Dn max. Pack. Code Pack. Code120 140 1 345 240 1 345 270140 160 1 345 241 1 345 271160 180 1 345 242 1 345 272180 200 1 345 243 1 345 273200 220 1 345 244 1 345 274220 240 1 345 245 1 345 275240 260 1 345 246 1 345 276260 280 1 345 247 1 345 277280 300 1 345 248 1 345 278300 320 1 345 249 1 345 279
• Complying with DTU 20.1• Facade application:
- System for supporting bricks for lining masonry
• Dnmaxi
: Maximum distance - Dnmini
: Minimum distance
LR BRICK SYSTEM WITH ADJUSTABLE ANGLE BRACKETCORNER ANGLE BAR
Cge2011Chap12EN.indd 643 11/07/2012 14:43:42
MASONRY LINING SYSTEMFOR RENOVATION PROJECTS
644 Tel. +33 1 34 80 52 08 Fax +33 1 34 80 52 40 [email protected] www.etanco.eu 2012
TWISTED TIP ROD FOR BENDING
NYLON XP 6x45 anchor (code 218 873), see page 213 - Retaining clips (code 361 500), see page 644“Water drip” washer (code 366 275), see page 645
• Cross references :
New
wal
l N
ew w
all
New
wal
l
Orig
inal
wal
l O
rigin
al w
all
Orig
inal
wal
l
Insu
latio
n In
sula
tion
Insu
latio
n
Empt
y s
pace
Austenitic stainless steelA2 Aisi 304
RENOVCO 69 RODSS A2
• Facade application:- Masonry lining system with rod to bend to match the desired length
Ø x L Pack. Code4 x 210 250 366 2384 x 250 250 366 2434 x 275 250 366 2484 x 300 250 366 2534 x 345 250 366 2554 x 375 250 366 2574 x 400 250 366 256
ALL PURPOSE TWO-PIECE ANCHOR WITH FLANGES
Drill bits, concrete, see page 680• Cross reference :
I = hnom
h1
d d0
Polyamide PA6 grey
NYLON XP
• Design use: Solid and hollow materials - (*) With prior testing• Product de nition:
- All purpose multi material anchor- High quality Nylon, resistant to outside aggression- Four anti-rotation wings- Perfect screw guidance in the anchor.
Ø x l d d0 h1
Box Code6 x 45 3 - 5 6 60 200 218 873
CLIP WASHER 65 X 65 MM FOR RETAINING INSULATION
• d : Nominal diameter - d0 : Support drilling diameter - h
1 : Support drilling depth - L : Length
Pack. Code250 361 500
Orange plastic
RENOVCO 69RETAINING CLIP
• Facade application:- Clip washers, 65 x 65 mm, for retaining the insulation for masonry lining on the facade using the
Renovco 69 system
Renovco 69 rods, see page 644• Cross reference :
Cge2011Chap12EN.indd 644 11/07/2012 14:43:43
MASONRY LINING SYSTEMFOR RENOVATION PROJECTS
645Tel. +33 1 34 80 52 08 Fax +33 1 34 80 52 40 [email protected] www.etanco.eu2012
“WATER DRIP” WASHER
Retaining clips (code 361 500), see page 644 - Renovco 69 rods, see page 644• Cross references :
New New wall New wall
Empty space
Original Original wall wall
Original wall
Black plasticWD WASHERRENOVCO 69
• Facade application:- Octagonal 20 mm “water drip” washer for lining masonry on façades with the Renovco 69 system
Width Pack. Code20 250 366 275
LINTEL HOOK
Vertical lintel hook
Horizontal lintel hook
Austenitic stainless steelA2 Aisi 304L
LINTEL HOOK / SS A2
Horizontal brick• Facade application:
- Retains the brick lining around window or door lintels
Model Pack. CodeHorizontal brick 1 344 690
Vertical brick 1 344 691
RETAINING BAND
RETAINING BAND
Model CodeOn request Ask us
Cge2011Chap12EN.indd 645 11/07/2012 14:43:46
LIGHT INSULATIONACCESSORY
646 Tel. +33 1 34 80 52 08 Fax +33 1 34 80 52 40 [email protected] www.etanco.eu 2012
DISTRIBUTION WEDGE
TAPCO TF anchors 8 mm dia. (code 359 960), see page 223• Cross reference :
Polyethylene hight density
WALL PANEL SPACER
• Facade application:- Wall panel spacer
Section Hole Ø Pack. Code30 x 15 8 100 603 110
ADJUSTING WEDGE
Thick.
Coloured plasticFORK SPACER
50 x 40
• Two holes are provided to nail it
Thick. Colour Pack. Code2 Yellow 100 369 0303 White 100 369 0325 Grey 100 369 034
Thick.
Coloured plasticFORK SPACER
60 x 30Thick. Colour Pack. Code
2 Blue 100 369 0363 Red 100 369 0385 Green 100 369 040
• Thick. : Thickness - Hole Ø : Hole diameter
Thick.
Solid black PVCADJUSTING SPACER
70 x 70
• Facade application:- Adjustment spacer resistant to 200 Kg/cm²
Thick. Pack. Code2 100 369 0423 100 369 0445 100 369 0469 100 369 048
Cge2011Chap12EN.indd 646 11/07/2012 14:43:50
NCS COLOUR CHART
647Tel. +33 1 34 80 52 08 Fax +33 1 34 80 52 40 [email protected] www.etanco.eu2012
ARPANCS colour chart
ETANCOColour Ref.
ARPA 0203 R 828ARPA 0206 772ARPA 0573 R 829ARPA 1826 926ARPA 4379 YELLOW BAMBOU 752
ETERNITNCS colour chart
ETANCOColour Ref.
ANTHRACITE ENGLERT 715BARYTINE 209BLEU CIEL TAHITI 412BLEU TAHITI 411BRONZE 715BRUME 103BRUN SAVANE 194CALCITE 197CANNELLE 182ECORCE 048ETERMUR AMBRE 139GALENE 272GIVRE 189GLASAL BLANC CRAIE 798 431
GLASAL BRUN 8014 208GRES 203GRIS M 201 GOBIT 714GRIS NUANCE 714GRIS OMBRE 165KAOLIN 226LATERITE 194MARBRE 374MINERALIS GRIS ANTHRACITE 220
MINERALIS GRIS HORIZON N 203 454
MINERALIS KORALLIT 1712 676
MINERALIS N 801 424MINERALIS N 204 793MINERALIS N 302 544MINERALIS N 303 792MINERALIS N 502 800MINERALIS OCEANIT 709MINERALIS SOLARIT 597MINERALIS VULCANIT 713MINERALIS ZENIT 598MULTIBOARD BLEU OCEAN 3806 517
MULTIBOARD GRIS ARGENT 3804 453
ETERNITNCS colour chart
ETANCOColour Ref.
MULTIBOARD VERT OLIVE 3805 566
NOIR GRAPHITE 221OCRE SUD 129OMBRE 310ORPIMENT 278PEGMATITE 188PHONOLITE 185RHYOLITE 210ROCHE 273ROSE 184ROSE PROVENCE 128ROUGE LATERITE 053SABLE 357STIBINE 224SYLVITE 190TUFFEAU 204URBANIS GRIS P 207 803URBANIS GRIS P 304 838VERT 245VERT FORET 101VERT MOUSSE 164
FORMICANCS colour chart
ETANCOColour Ref.
FORMICA GALET 736FORMICA HAWAÏ 737FORMICA MADERA 643FORMICA SAFRAM 7024 613FORMICA SILEX 738
FUNDERMAXNCS colour chart
ETANCOColour Ref.
65 FH 62366 FH 5560026 8870059 8170075 7170077 6840125 6980160 7560161 6990162 5330163 8880213 7050267 7570270 726
FUNDERMAXNCS colour chart
ETANCOColour Ref.
0272 9200291 778294 EP 5480295 6960609 7020617 8840620 0890627 689627 FH 4660630 7030631 8850634 0220641 7700644 8090647 6620651 6880661 7890662 6820663 7940674 5730680 1780687 2150690 6160692 821693 FH 6220702 7060703 7580704 6630705 6720706 6690712 6950717 6740736 6680742 6810772 7870776 6700777 6670778 8080801 8910851 687
continued on next page
Cge2011Chap12EN.indd 647 11/07/2012 14:43:54
NCS COLOUR CHART
648 Tel. +33 1 34 80 52 08 Fax +33 1 34 80 52 40 [email protected] www.etanco.eu 2012
PARKLEXNCS colour chart
ETANCOColour Ref.
1000 BBP 5301000 BN LISO 5331000 EB CLARO TECK1000 AYOUS CLAIR 531
1000 EDP OSCUTO BROWN EYONG 529
1000 EN LISO (BOAK) NATURAL EYONG 532
POLYREYNCS colour chart
ETANCOColour Ref.
BLANC MENUIRES 262COQUILLE d’ŒUF 14FER 102GRIS DAUPHIN 480PIERRE de LUNE 64
PRODEMANCS colour chart
ETANCOColour Ref.
BAK CLARO LISO 570BAK COFFEE LISO 056BAK MARWO 533MARRON CLARO 727MARRON TOSTADO LISO 054RUSTIK LISO 532
TRESPA METEONNCS colour chart
ETANCOColour Ref.
0773 456A 03.0.0 604A 03.0.1 578A 03.1.0 562A 03.4.0 502A 04.0.0 014A 04.0.2 594A 04.1.7 582A 04.7.1 582A 05.0.0 262A 05.1.0 619A 05.1.1 577A 05.1.2 675A 05.1.4 485A 06.3.1 567A 06.3.5 759A 06.4.1 581A 07.1.1 215
TRESPA METEONNCS colour chart
ETANCOColour Ref.
A 08.2.1 619A 08.2.3 611A 08.3.1 503A 08.4.5 104A 08.8.1 601A 09.6.4 259A 10.1.8 925A 10.3.2 535A 10.4.5 955A 10.6.1 591A 11.4.4 494A 12.3.7 924A 12.6.3 536A 13.3.1 788A 16.5.1 834A 17.3.5 894A 20.5.2 842A 20.7.2 505A 21.1.0 480A 21.5.1 501A 21.5.4 603A 22.2.1 680A 22.3.1 798A 22.4.4 572A 22.6.2 497A 23.0.4 890A 24.4.1 565A 25.7.1 651A 25.8.1 765A 28.2.1 580A 28.6.2 806A 30.2.3 893A 30.3.2 761A 32.2.1 760A 36.4.1 586A 37.2.3 896A 42.2.1 486A 42.3.2 504A 50.1.3 677CM 26.4.2 846CUIVRE 468E 6.53 024J 06.4.1 783J 12.4.2 782J 34.3.1 784M 12.4.2 583M 21.3.4 641M 21.8.1 1 / GL 558M 35.7.1 / RT 678
TRESPA METEONNCS colour chart
ETANCOColour Ref.
M 51.0.0 / RT 010M 51.0.1 / RT 010M 51.0.1 / ST 781M 53.0.1 468M 53.0.2 571NA 01 / ST 104NA 02 / ST 533NA 03 / ST 751NW 01 / ST 777NW 02 / ST 778NW 03 / ST 532NW 04 / ST 892NW 05 / ST 032NW 07 / ST 599NW 08 / ST 460PACIFIC BOARD 892PZ 02 / ST 634W 73.0.1 801
VETISOLNCS colour chart
ETANCOColour Ref.
PLAZZA 1202 383PLAZZA 1236 711PLAZZA 1902 215PLAZZA P 10476 845PLAZZA PE 1302 158PLAZZA PE 1838 347PLAZZA PE 1944 196VETISOL GOLD P0446 856VETISOL HETRE 730VETISOL SHADOW 827
Cge2011Chap12EN.indd 648 11/07/2012 14:43:54
NOTES
649Tel. +33 1 34 80 52 08 Fax +33 1 34 80 52 40 [email protected] www.etanco.eu2012
Cge2011Chap12EN.indd 649 11/07/2012 14:43:55
NOTES
650 Tel. +33 1 34 80 52 08 Fax +33 1 34 80 52 40 [email protected] www.etanco.eu 2012
Cge2011Chap12EN.indd 650 11/07/2012 14:43:55