export catalogue 111104-100nm - tubular motor€¦ · tubular motor-----3.1 tesc 50 series 12 / 24...

PRODUCT CATALOGUE

CONTENTS

1. About Tong Eann Shutters Co., Ltd.-------------------------------- 1.1

2. Order Form--------------------------------------------------------------- 2.1

3. Tubular Motor----------------------------------------------------------- 3.1

TESC 50 SERIES 12 / 24 Vdc tubular motor------------------------------------------------ 3.1.1

R-system tubular motor technical data (120V~60Hz)-------------------------------------- 3.1.2

DS40R / 50R-system descriptions-------------------------------------------------------- 3.1.3

Bracket Accessories------------------------------------------------------------------------- 3.1.4~5

TE40-Adapter------------------------------------------------------------------------------- 3.1.6

TE50、TE60 Adapter----------------------------------------------------------------------- 3.1.7

Aluminum Tubes---------------------------------------------------------------------------- 3.1.8

Spools------------------------------------------------------------------------------------------ 3.1.8

End Caps-------------------------------------------------------------------------------------- 3.1.9

R-system technical data (230V ~ 50Hz) ------------------------------------------------------- 3.2.1

TE40R / 50R-system descriptions-------------------------------------------------------- 3.2.2

RF-Group Control--------------------------------------------------------------------------------- 3.3.1

RF- Individual Control--------------------------------------------------------------------------- 3.3.1

Wall Switch----------------------------------------------------------------------------------------- 3.3.2

Group & Individual Control-------------------------------------------------------------------- 3.3.2

4. Roller Door Motor (Side Motor) ------------------------------------------------- 4.1

Technical data-------------------------------------------------------------------------------------- 4.1.1~2

Accessories----------------------------------------------------------------------------------- 4.2.1~4

Jan 17th, 2012

COMPANY PROFILE

PRODUCT CATALOGUE

Company Profile

TESC motors and controls were established in 1977,

professionally manufactured in fire-proof rolling shutters,

grille shutters, rolling door motors & operators, and the

accessories of rolling shutters.

The factory in Ching Shoei organized in 1994 takes up the land

of 10,000m2, equipped with three sets of automatic production

lines of shutter operators, ten sets of automatically shaped

machines of shutter slats and shutter grilles, automatic lathe,

expanded business items into tubular motors, security rolling

shutter operators, and motors for awnings, blinds, screens and

window rolling shutters. We got good reputation with our products

exporting overseas & inland trade.

1.1

ORDER FORM PRODUCT CATALOGUE

The Order Form

Tong Eann Shutters Co., Ltd. Ph: +886-4-2611 2999 Fax: +886-4-2611 2826 Email: [email protected]

From: Tel: Address: Fax: Email:

Item number Model Quantity Export Price Amount 235 510 122 tubular motor TE510-12R 1000 pcs US$ US$

(minimum)

2.1

TUBULAR MOTOR PRODUCT CATALOGUE

Motorized Solution

3.1

Characteristics of tubular motors:

When the rolling shutter is moving down, the tubular motor will automatically stop running with obstacles for protecting shutters from broken-down and the users’ security.

It is convenient and comfortable only to operate on buttons by orders to do electronic setting limits.

Integrated remote receiver can be installed inside the 35mm tubular motor.

Simple in construction, easy installation, and reliable.

Our products manufactured with strict quality have passed the TÜV test of Germany in accord with CE safety standards.

Protection of the roller shutter

USC

R


DC TUBULAR MOTOR

TESC 50 SERIES 12 Vdc Tubular Motors Technical Data

TESC 50 SERIES 24 Vdc Tubular Motor Technical Data

TESC 50 SERIES 12 / 24 Vdc tubular motor

3.1.1

Type Torque Speed Voltage Current Power Limit switchInterval

Operation Time

Motor Diameter－length

Weight (kg)

Nm r.p.m V A W R min mm kg

DC12V 515 / 11 15 Nm 11 12 3.8 42 0－33 5 Ø 45 – 590 2.5

DC12V 520 / 10 20 Nm 10.5 12 5.1 56 0－33 5 Ø 45 – 590 2.5

DC12V 525 / 10 25 Nm 10 12 5.7 62 0－33 5 Ø 45 – 590 2.6

Type Torque Speed Voltage Current Power Limit switchInterval

Operation Time

Motor Diameter－length

Weight (kg)

Nm r.p.m V A W R min mm kg

DC24V 515 15 Nm 10.7 24 2.1 47 0－33 5 Ø 45 – 590 2.5

DC24V 520 20 Nm 10 24 2.6 54 0－33 5 Ø 45 – 590 2.5

DC24V 525 25 Nm 9.7 24 3.0 65 0－33 5 Ø 45 – 590 2.6


TUBULAR MOTOR

TECHNICAL DATA－R-system (120V ~ 60Hz) (With Mechanical limit Switch)

DS400-00RB series and DS500-00RB series of built-in radio-controlled tubular

motors are available if needed.

3.1.2

Item No. Type Torque Speed Current Power Limit switchInterval

OperationTime

Motor Diameter －length

Weight(kg)

Nm In lb r.p.m A W R min mm kg

126 403 362 DS403-36R 3 Nm 26.4 36 1.00 113 0－42 4 Ø 35 – 560 1.4 DS40-113W

126 405 362 DS405-36R 5 Nm 44 36 1.10 130 0－42 4 Ø 35 – 560 1.5 DS40-130W

126 406 192 DS406-19R 6 Nm 52.8 19 1.00 113 0－42 4 Ø 35 – 560 1.4 DS40-113W

126 410 192 DS410-19R 10 Nm 88 19 1.10 130 0－42 4 Ø 35 – 560 1.5 DS40-130W

126 504 362 DS504-36R 4 Nm 35.2 36 0.95 115 0－33 4 Ø 45 – 590 2.3 DS50-115W

126 508 202 DS508-20R 8 Nm 52.8 20 0.95 115 0－33 4 Ø 45 – 590 2.3 DS50-115W

126 508 362 DS508-36R 8 Nm 70.4 36 1.40 160 0－33 4 Ø 45 – 590 2.5 DS50-160W

126 510 152 DS510-15R 10 Nm 88 15 0.95 115 0－33 4 Ø 45 – 590 2.3 DS50-115W

126 512 362 DS512-36R 12 Nm 105.6 36 1.70 202 0－33 4 Ø 45 – 590 2.7 DS50-202W

126 515 202 DS515-20R 15 Nm 105.6 20 1.40 160 0－33 4 Ø 45 – 590 2.5 DS50-160W

126 516 362 DS516-36R 16 Nm 140.8 36 2.50 260 0－33 4 Ø 45 – 590 2.9 DS50-260W

126 520 152 DS520-15R 20 Nm 176 15 1.40 160 0－33 4 Ø 45 – 590 2.5 DS50-160W

126 522 202 DS522-20R 22 Nm 176 20 1.70 202 0－33 4 Ø 45 – 590 2.7 DS50-202W

126 530 202 DS530-20R 30 Nm 228.8 20 2.50 260 0－33 4 Ø 45 – 590 2.9 DS50-260W

126 530 152 DS530-15R 30 Nm 264 15 1.70 202 0－33 4 Ø 45 – 590 2.7 DS50-202W

126 540 152 DS540-15R 40 Nm 352 15 2.50 260 0－33 4 Ø 45 – 590 3.1 DS50-260W

126 6100 152 DS6100-15R 100 Nm 885 15 4.15 445 0－25 4 Ø 57 – 680 4.6

USC

R

USC

R

TUBULAR MOTOR

PRODUCT CATALOGUE

TUBULAR MOTOR

DS40 DS50

Item number Model Descriptions Picture Tubular motor Torque Speed

126 406 182 DS406-19R 6 Nm 19 rpm 126 410 182 DS410-19R 10 Nm 19 rpm 126 403 362 DS403-36R 3 Nm 36 rpm 126 405 362 DS405-36R 5 Nm 36 rpm

126 510 152 DS510-15R 10 Nm 15 rpm 126 520 152 DS520-15R 20 Nm 15 rpm 126 530 152 DS530-15R 30 Nm 15 rpm 126 540 152 DS540-15R 40 Nm 15 rpm 126 508 202 DS508-20R 8 Nm 20 rpm 126 515 202 DS515-20R 15 Nm 20 rpm 126 522 202 DS522-20R 22 Nm 20 rpm 126 530 202 DS530-20R 30 Nm 20 rpm 126 504 362 DS504-36R 4 Nm 36 rpm 126 508 362 DS508-36R 8 Nm 36 rpm 126 512 362 DS512-36R 12 Nm 36 rpm 126 516 362 DS516-36R 16 Nm 36 rpm

126 6100 152 DS6100-15R 100Nm 15 rpm

DS400-00RB series and DS500-00RB series of built-in radio-controlled tubular


3.1.3

R-system description (120V~60Hz)

USC

R

USC

R

TUBULAR MOTOR --- ACCESSORIES PRODUCT

CATALOGUE

TUBULAR MOTOR

Bracket Accessories Part number Model Descriptions Picture

200-451-001 (200-351-001) Wall bracket (90+40) X 73 mm

200-451-001A Wall bracket W72 (80+35) X 72 mm

200-451-001B Wall bracket W100 (80+35) X 100/100 mm

200 451 006 Ø 45 Motor Pin Stud □10mm hole

200 351 005

(200 451 005) Plastic bearing stud Ø12mm shaft

200 352 001 Ø 35 Motor Pin Stud □10mm pin

3.1.4

TUBULAR MOTOR --- ACCESSORIES PRODUCT CATALOGUE

TUBULAR MOTOR

Part number Model Descriptions Picture

200 351 007 Ø 35 Motor Pin Stud □10mm hole

200 452 001 Ø 45 Motor Pin Stud □10mm pin

200 451 007 45E motor bracket stud 2.5t × 80 × 80

200 351 006 Ø 35 / 45 Motor Pin Stud 10mm square hole pin

200 451 008 Ø12mm shaft stud Pin Ø12 × 25 mm

200 451 002 Mounting stud 10mm square hole pin

200 451 010 Ø12 bearing Ø28 × Shaft Ø12

200 451 020 Ø28 bearing bracket 2.5t x 70 X 50 mm

3.1.5


TUBULAR MOTOR TE40 Adapter:


200 351 040 Ø 37.7

A. Crown B. Drive

Round Tube Ø 40 x 0.8 Ø 40 x 1.0

200 351 050 Ø 46.7

A. Crown B. Drive


200 351 063 Ø 60.5

A. Crown B. Drive

Round Tube Ø 63 x 1.0

200 351 440 SW-38

A. Crown B. Drive

Octagonal Tube SW 40 x 0.6 SW 40 x 0.8

200 351 460 SW-57.5 A. Crown B. Drive

Octagonal Tube SW 60 x 0.6

SW 60 x 0.8

SW 60 x 1.0

3.1.6


TUBULAR MOTOR

TE 50 Adapter: Part number Model Descriptions Picture

200 451 050 Ø 47

A. Crown B. Drive


200 451 026 SW-57.5 A. Crown B. Drive


SW 60 x 0.8

SW 60 x 1.0

200 451 570 SW-67.3 A. Crown B. Drive


200 451 078 Ø 75

A. Crown B. Drive


TE 60 Adapter

200 571 670 SW-67.3 A. Crown B. Drive


3.1.7


TUBULAR MOTOR

Aluminum Tubes:


200 351 031 Ø 44 Aluminum Tube

Ø 44 x 38 Octagonal Hole

200 451 031 Ø 65 Aluminum Tube

Ø 65 x 58 Octagonal Hole

Spools:


200 351 244 Ø 44 Spools Ø 68 x Ø 44 x 38L

Pin Hole Ø 3.3

200 451 265 Ø 65 Spools Ø 89 x Ø 65 x 38L

Pin Hole Ø 3.3

3.1.8


TUBULAR MOTOR End Caps:


200 351 540 Ø 38 (inner tube dia.)


200 451 013 Ø 47 (inner tube dia.)


200 451 563 Ø 60.5 (inner tube dia.)


200 351 012 SW-38 (inner tube dia.)

Octagonal Tube SW 40 x 0.6 SW 40 x 0.8

200 451 011 SW-57.5 (inner tube dia.)

Octagonal Tube SW 60 x 0.6 SW 60 x 0.8 SW 60 x 1.0

200 451 578 Ø 75.2 (inner tube dia.)


3.1.9


TUBULAR MOTOR

TECHNICAL DATA－R-system of Tubular Motors (230V AC 50Hz)

(With Mechanical Limit Switch)

TE400-00RB series and TE500-00RB series of built-in radio-controlled

tubular motors are available if needed.

3.2.1

Item No. Type Torque Speed Current Power VoltageLimit switch

Interval

OperationTime

Protection Class

Motor Diameter

－length Weight

(Kg)

Nm r.p.m A W V~50Hz R min IPxx mm Kg

235 403 302 TE403-30R 3 Nm 30 0.38 90 230-240 0－42 4 IP44 Ø 35 – 560 1.4

235 405 302 TE405-30R 5 Nm 30 0.49 120 230-240 0－42 4 IP44 Ø 35 – 560 1.5

235 406 152 TE406-15R 6 Nm 15 0.38 90 230-240 0－42 4 IP44 Ø 35 – 560 1.4

235 410 152 TE410-15R 10 Nm 15 0.49 120 230-240 0－42 4 IP44 Ø 35 – 560 1.5

235 504 302 TE504-30R 4 Nm 30 0.41 100 230-240 0－33 4 IP44 Ø 45 – 590 2.3

235 508 162 TE508-16R 8 Nm 16 0.41 100 230-240 0－33 4 IP44 Ø 45 – 590 2.3

235 508 302 TE508-30R 8 Nm 30 0.63 150 230-240 0－33 4 IP44 Ø 45 – 590 2.5

235 510 122 TE510-12R 10 Nm 12 0.41 100 230-240 0－33 4 IP44 Ø 45 – 590 2.3

235 512 302 TE512-30R 12 Nm 30 0.78 185 230-240 0－33 4 IP44 Ø 45 – 590 2.7

235 515 162 TE515-16R 15 Nm 16 0.63 150 230-240 0－33 4 IP44 Ø 45 – 590 2.5

235 516 302 TE516-30R 16 Nm 30 1.02 241 230-240 0－33 4 IP44 Ø 45 – 590 2.9

235 520 122 TE520-12R 20 Nm 12 0.63 150 230-240 0－33 4 IP44 Ø 45 – 590 2.5

235 522 162 TE522-16R 22 Nm 16 0.78 185 230-240 0－33 4 IP44 Ø 45 – 590 2.7

235 530 162 TE530-16R 30 Nm 16 1.02 241 230-240 0－33 4 IP44 Ø 45 – 590 2.9

235 530 122 TE530-12R 30 Nm 12 0.78 185 230-240 0－33 4 IP44 Ø 45 – 590 2.7

235 540 122 TE540-12R 40 Nm 12 1.02 241 230-240 0－33 4 IP44 Ø 45 – 590 3.1

235 6100 122 TE6100-12R 100 Nm 12 2.3 500 230-240 0－25 4 IP44 Ø 57 – 680 4.6

235 515L 122 TE515L-12R 15 Nm 12 0.6 140 230 0－33 15 IP44 Ø 45 – 590 2.9

235 506L 30R TE506L-30R 6 Nm 30 0.6 140 230 0－33 15 IP44 Ø 45 – 590 2.9


TUBULAR MOTOR TE40 TE50 Item number Model Description Picture

Tubular Motor Torque Speed 235 406 152 TE406-15R 6 Nm 15 rpm 235 410 152 TE410-15R 10 Nm 15 rpm 235 403 302 TE403-30R 3 Nm 30 rpm 235 405 302 TE405-30R 5 Nm 30 rpm

235 510 122 TE510-12R 10 Nm 12 rpm 235 520 122 TE520-12R 20 Nm 12 rpm 235 530 122 TE530-12R 30 Nm 12 rpm 235 540 122 TE540-12R 40 Nm 12 rpm 235 508 162 TE508-16R 8 Nm 16 rpm 235 515 162 TE515-16R 15 Nm 16 rpm 235 522 162 TE522-16R 22 Nm 16 rpm 235 530 162 TE530-16R 30 Nm 16 rpm 235 504 302 TE504-30R 4 Nm 30 rpm 235 508 302 TE508-30R 8 Nm 30 rpm 235 512 302 TE512-30R 12 Nm 30 rpm 235 516 302 TE516-30R 16 Nm 30 rpm

235 6100 122 TE6100-12R 100 Nm 12 rpm

TE400-00RB series and TE500-00RB series of built-in radio-controlled tubular


3.2.2

R-system description (230-240V~50Hz)

TUBULAR MOTOR --- CONTROL AND SWITCHES PRODUCT CATALOGUE

TUBULAR MOTOR RF – Group Control (Up to 4 Motors):


200 050 305 288 RS Radio Remote control

433 MHz

200 050 507 315 RS Radio 1 to 15 Multi Control (no receiver)

200 050 306 203RS Radio Remote control

315MHz

200 050 506 205RS

transmitter

Radio 1 to 4 Multi Control (no receiver)

RF – Individual Control (1 by 1):


200 050 508 311RS Radio remote Control

(no receiver)

3.3.1


TUBULAR MOTOR Wall Switch:


200 050 001 ESTN 101 Rocker switch

200 050 004 DS 101 Rocker switch

200 050 002 DS 102 Wall Switch

800 030 001 PBS 03 Push Button Switch

Group & Individual Control:


200 050 104 104 A AC multi control

(4u)

200 050 555 BT 555 Vacuum Switch

3.3.2

ROLLER DOOR MOTOR PRODUCT CATALOGUE

Roller Door Motor (Side Motor)

Profile of Roller Door Motor

1. F (follow) Side Bracket. 7. Hand Chain. 2. Barrel. 8. Push Button Switch. 3. Shutter Case. 9. Guide Rail. 4. Rolling Door Motor. 10. Shutter Slats. 5. D (drive) Side Bracket. 11. Bottom Rail. 6. Rolling Chain.

4.1

Characteristics of rolling door motor ＆ operator： Compact construction, large torque, and running without noise.

Patented in structure, smooth brake, and not sliding down.

The motor will not burn down for the protection of thermal effect.

Separate circuit control ensures the security.

If attached with smoke sensor, connector, etc., it promotes to be fire-proof shutters.

UPS automatic system is available.


Roller Door Motor (Side Motor) Technical Data

835 300 000 835 400 000 835 500 000 835 700 000 835 100 000

model DS-30 DS-40 DS-50 DS-70 DS-100 Output 175W-6P 200W-6P 250W-6P 365W-4P 730W-6P M

otor Shaft speed 50 / 60 Hz

28 / 35 rpm 28 / 35 rpm 28 / 35 rpm 24 / 28 rpm 14 / 17.5 rpm

Sprocket motor / barrel 9T / 50T 9T / 50T 9T / 50T 9T / 50T 11T / 48T

roller chain #530 #530 #530 #640 #640*2 speed

50/60Hz 5.2 / 6.3 rpm 5.2 / 6.3 rpm 5.2 / 6.3 rpm 4.5 / 5.3 rpm 3.0 / 3.7 rpmBarrel DIM 4”(114Ø) 4”(114Ø) 5”(140Ø) 5”(140Ø) 6”(165Ø)

Max. roll-up load 300 kg 400 kg 500 kg 700 kg 1000 kg Max. height 6 M 6 M 6.8 M 7.5 M 8.5 M

N.W. 12 kg 13 kg 15 kg 17 kg 40 kg Power source

1P/115V~60Hz ◎ ◎ －－－ 1P/220V~60Hz ◎ ◎ ◎ ◎ ◎ 1P/230V~50Hz ◎ ◎ ◎ ◎ ◎

3P/200-240V~50/60Hz ◎ ◎ ◎ ◎ ◎ 3P/346-480V~50/60Hz ◎ ◎ ◎ ◎ ◎

4.1.1

Item No

Spec.


Roller Door Motor (Side Motor) Technical Data

835 000 200 835 000 300

model DS-200 DS-300 Output 1.5 KW 1.5 KW M

otor Shaft Speed 50 / 60 Hz 14.3 / 17.8 rpm 14.3 / 17.8 rpm

Sprocket motor / barrel 15T / 65T 12T / 48T

roller chain 3/4” * 2 1” * 2 Speed

50 / 60 Hz 3.3 / 4 rpm 3.3 / 4 rpm Barrel DIM 10”(267.4mm) 12”(318.5mm)

Max. roll-up load 1,600 kg 2,500 kg Operator weight 115 kg 130 kg

Power source 3 Phases /220V~380V ◎ ◎

L*W*H (mm) 830 * 300 *400 830 * 350 * 550

4.1.2

Item No

Spec.

ROLLER DOOR MOTOR --- ACCESSORIES PRODUCT CATALOGUE


ACCESSORIES part:1-5 Part number Model Descriptions Picture

800 010 036 800 010 040

Bracket set 36*52 cm 40*55 cm

Gear #530*50T Chain #530*66L Dummy ends 4”(114Ø) Bearing 6207 Shaft Ø35

800 010 045 45*58 cm


800 010 700 Sprocket DS-70


800 010 100 Sprocket DS-100

Gear #640*50T*2 Chain #640*80L*2 Dummy ends 6”(165Ø) Bearing 6209 Shaft Ø45

4.2.1


Roller Door Motor (Side Motor) ACCESSORIES part: 3-5


800 030 001 PBS 03 Push Button Switch

800 030 007 800 030 005

ST Key Box Built in (“－” key)

Built in (“o, H“ key)

800 030 006

800 030 008 ST Key Box

External. (“－” key)

External. (“o, H“ key)

800 030 100

800 030 101

800 030 102

Control panel

(3 phase)

3 phase 380V

3 phase 440V

3 phase 480V

4.2.2




800 050 801 Pressure ware switch (with remote control)

4 x 4 x 17 cm 433MHz

800 050 803 Sealing plug DSP-H ＆ DSP-C

800 050 805 DPL-DW Profile 2 lips 5mm EPDM

800 050 806 Aluminum Rail C36*13mm

800 050 901 Smoke detector Ø102 X 52 mm

800 050 902 800 050 903

Alarm processing center reactive

connector

A. SM-1-single mainframe

B. JIC-600-group type

800 050 905 DS-150 Thermal control device

800 050 951 UPS TP250

110V/60Hz & 220V/60HzCapacity: 3.5KVA Dimension:43*33*22cm Output Power 5A x 20 min

4.2.3




800 090 801 800 090 802

Pulley 145 Pulley 180

Shutter Pulley Ø145*Ø35 Ø180*Ø43

800 090 811 Shutter spring Wire diameter: 4.0 ~ 7.0mm

Length: 1 ~ 3.5ft

800 090 831 No: 929 Shutter lock

Only For Rolling Door Motor (1 by 1):


800 050 055 HOP-2004TA Remote Controller Voltage 110V ~ 230V compatibleFrequency 363MHz~433MHz

4.2.4

export catalogue 111104-100nm - tubular motor€¦ · tubular motor-----3.1 tesc 50 series 12 / 24...

Documents