manual cm-01/02 · coulisse motion cm-01/02 tubular motor cm-01/02 tubular motor the easiest...
TRANSCRIPT
COULISSE MOTION CM-01/02 TUBULAR MOTOR
MANUAL CM-01/02The easiest motorization
for single roller blinds
COULISSE MOTION CM-01/02 TUBULAR MOTOR
MANUAL CM-01/02The easiest motorization
for single roller blinds
Pull
Li-ion battery
Happy programming
Favorite position
Child safe
IP 44
English
usb rechargeable
cable free
COULISSE MOTION CM-01/02 TUBULAR MOTOR
CM-01/02Tubular motor
The easiest motorization for single roller blinds
SafetyWARNING: Important safety instructions. Follow all instructions, since incorrect installation can lead to severe injury.
Do not let children play with the blind and/or remote control.
Take care that the blind can move freely and is not blocked by objects.
Do not paint the device. Keep the device dry. Do not drop, knock, or shake the device.
Rough handling can break internal circuit boards.
CleaningFollow these general rules when cleaning the outside of the device and its components:
Use a damp, soft, lint-free cloth. Avoid getting moisture in openings.
Don't use aerosol sprays, solvents, alcohol, or abrasives.
Service & SupportDo not make repairs yourself. Do not attempt to open the device or disassemble it. You run the risk of electric shock and voiding the limited warranty. No user-serviceable parts are inside.
Warranty ServiceFirst follow the advice in this manual. If the product appears to be damaged or does not function properly, go to your local dealer for instructions on how to obtain warranty service.
WARNINGRead the instructions carefully before assembling and using the product. Assembling process can be completed by non-professionals. For indoor use only.
Young children can strangle in the loop of pull cords, chains and tapes, and cords that operate window coverings.
To avoid strangulation and entanglement, keep cords out of the reach of young children.
Cords may become wrapped around a child’s neck.
Move beds, cots and furniture away from window covering cords.
Do not tie cords together. Make sure cords do not twist
together and form a loop.
English
Pull MotionEasily control your motorized blind
by pulling a chain weight or wand
Li-ion BatteryRechargeable integrated
Li-ion battery
USB Rechargeable Rechargeable with micro
USB cable
Happy ProgrammingDummy proof programming using
the pull function of the blind
Favorite PositionPre-set your
favorite position
Child SafeChild safe solution
free of hazardous loops
Cable FreeInstall your motorized
blind cable free
Click!
Click!
Click!
1
2
3
4
5
6
7
8
English
Charge to activate the motor
Installing the blind
COULISSE MOTION CM-01/02 TUBULAR MOTOR
Charge before first use. (See step 17) A green LED will flash. The motor can be used during charging.
Set bottom limit
Set upper limit
COULISSE MOTION CM-01/02 TUBULAR MOTOR
Pull and hold the chain until the blind has reached the bottom limit. If the blind moves in the opposite direction release the chain and pull and hold again.
Adjust until the desired bottom limit has been reached.
Save the position by pushing the button until the blind moves up and down.
Pull and hold the chain until the blind has reached the upper limit. If the blind moves in the opposite direction release the chain and pull and hold again.
Adjust until the desired upper limit has been reached
English
Scan the QR codefor more informationrtube.nl/red792
9
10
11
12
13
14
EnglishCOULISSE MOTION CM-01/02 TUBULAR MOTOR
Save the position by pushing the button untilthe blind moves up and down.
Pull the chain shortly to start or stop the blind.
Pull the chain shortly to start or stop the blind.
Operating the blind
Optional: Set the favorite position
COULISSE MOTION CM-01/02 TUBULAR MOTOR
Pull and hold the chain for approximately 7 seconds until the blind moves up and down.
Go to any position other than the saved favorite position.
Hold the chain for 5 seconds The blind moves to the favorite position.
Operate to favorite position
English
15
16
17
English
Delete favorite position
Delete end limits
The favorite position can only be deleted when the blind is placed in the favorite position.
Hold the button for approximately 10 seconds, after 5 seconds the blind will move up and down. Keep pushing the button untill the blind moves up and down again.
Repeat steps 9 - 12 to save new end limits.
Pull and hold the chain for approximately 7 seconds untill the blind moves up and down.Go to step 11 to program a new favorite position.
COULISSE MOTION CM-01/02 TUBULAR MOTOR
Recharge battery
Blinking red during operation;
Charge the batteryBlinking green;
battery is chargingContinuously green;
battery is fully charged
COULISSE MOTION CM-01/02 TUBULAR MOTOREnglish
English
Disclaimer:
© Copyright Coulisse
All rights reserved. No part of this publication may be reproduced, stored in a retrieval system, or transmitted, in any form, by any means, electronic, mechanical, photocopying, recording, digital or otherwise without the written permission of the publisher.Although this manual has been composed with the most care, Coulisse B.V. does not accept any responsibility for damage due to mistakes and/or faults in this manual.Coulisse B.V. reserves the right to revise the manual and to revise and/or changes its content at any time, without obligation to notify any person or entity of such revisions or changes.The most recent version replaces older versions of this manual. The most recent version is available at my.coulisse.com or contact your Coulisse contact person.We invite you to send remarks and comments about this manual to Coulisse at [email protected].
For the latest information and updated manuals visit my.coulisse.com
COULISSE MOTION CM-01/02 TUBULAR MOTOR COULISSE MOTION CM-01/02 TUBULAR MOTOREnglish
Coulisse B.V. Vonderweg 48 7468 DC Enter The Netherlands t +31 547 85 55 55 f +31 547 85 55 50 e [email protected]
coulisse.com
CM01/02-U-R1
Coulisse B.V. Vonderweg 48 7468 DC Enter The Netherlands t +31 547 85 55 55 f +31 547 85 55 50 e [email protected]
coulisse.com