exit 2 architectural map chiyoda l. yushima sta. the ...iass2016.jp/venuehotel/hongo archi...
TRANSCRIPT
4
3
5
71 2 8 9
11
10
Main Gate Hongo-dori Ave.
Kototoi-dori Ave.
Shinobazu-dori Ave.
Kas
uga-
dori
Ave.
Nishikata GateNo-Seimon(Gate)
Yayoi Gate
Ikenohata Gate
Akamon (Gate)
Kaitoku Gate
Kasuga Gate
Tatsuoka Gate
M21
E08
Oedo L.Hongo-sanchome Sta.
Namboku L.Todaimae Sta.
N12
Chiyoda L.Nezu Sta.
C14
Chiyoda L.Yushima Sta.
C13
Marunouchi L.Hongo-sanchome Sta.
EV
Exit 2Exit 3
Exit 4
Exit 5
Exit 3
Exit 4Exit 2
Exit 1
Exit 2
Exit 1
EV
EV
Exit 2
Exit 1
Exit 1
ARCHITECTURAL MAPTHE UNIVERSITY OF TOKYOWe picked up the recommended architectures in Hongo Campus.Please click the pictures, and you’ll jump to the related page.
1
77
10
11
98
4 5
2
Yayoi Auditorium Annex
Yayoi Auditorium
Engineering Bldg.2
TakedaBldg.
School ofLaw Bldg.
FukutakeHall Akamon
Yasuda Auditorium Sanjo Hall
SanshiroPond
Ito International Center/Ito Hall
Daiwa Ubiquitous Computing ResearchCenter
6
6
3
Architectural Design : Taiji Kawano Architects
Structural Design : Masahiro Inayama
Structure : Wood, Steel
Yayoi Auditorium Annex (2008)
1
The building contains a garrely suitable for receptions and
symposiums, and a laboratory for the graduate school members
who study wooden buildings. The gallery was structured by 8
pieces of HP shells and the laboratory was structured by one sided
rigid frame where artificially dried Japanese cypress were used.
Japanese cedar with heat treatment, LVL, and some other wooden
materials were used as the finished materials inside and outside
the building to match with the copperplate roof and the grind
concrete floor, considering the harmony with the neighboring
Gothic buildings on the same campus.
back to the mapSource of photo : http://www.tk-arc.jp/a_annex02.html
2
Architectural Design : Hisao Kouyama
Structure : Wood, Steel
Yayoi Auditorium (2000)
Yayoi Auditorium is a energy-saving and enviroment-friendly
building donated by Ichijo Koumuten in 2000. It has a main hall
(Ichijo Hall), Seminar rooms and space for exhibition. Natural
pines are used as the structural materials and there are pillars
standing close together in 3.6 meter grid pattern like a forest.
In the main hall, the beams of more than 20 meters long were
built like an umbrella, which show the advenced technical
capabilities of wooden structures. The distinct feature of the hall
is natural light from its openings between the wall and the
ceiling.
back to the mapSource of photo : http://www.u-tokyo.ac.jp/ http://blog.goo.ne.jp/elmar22
33
Architectural Design : Shogo Kishida
Structure : Steel
Takeda Bldg. (2003)
Takeda Bldg. is a reserch facility which contains super clean
rooms in the basement and a large hall on the top floor. The three
sides of the building - east, south and west - are covered with
gratings so that it can catch natural light while shielding the inside
from direct sunlight. On the north side, it has an atrium opened to
the campus, which provides characteristic space combined with the
grand staircases and the place of communication.
back to the mapSource of photo : http://www.atelier-spinoza.com/
4
Architectural Design : Shogo Kishida
Structural Design: Ken’ ichi Kawaguchi
Detailed Design: Rui Sekkeishitsu
Structure : Steel, SRC
Building Area : 3,934 m2
Floor Area : 33,308 m2
New Engineering Bldg.2 (2005)
Two towers, north and south, have been newly constructed as the
extension of laboratory space of Engineering Building #2. The
massive new research space of south tower is supported above the
existing old building, at the 16m height, by twenty super columns in
the courtyard and two pairs of V shaped columns outside, without
touching the old building. The super columns support the main part
of the weight of the south tower. The V-shaped columns partially
support the weight of upper building but are mostly equipped for the
seismic load. For N-S ground motion the inclined columns take the
horizontal load. For E-W ground motion they stand against the
tilting rotational moment and the horizontal force is transmitted to
the north tower by the horizontal braces arranged in the academic
valley space between the two towers.
back to the map
Fig.1 Function of V columns under seismic load
Fig.2 1st Mode under horizontal seismic excitation
5
Architectural Design : Yoshikazu Uchida /Hideto Kishida
Structure : RC, Steel
Yasuda Auditorium (1925)
The architect Yoshikazu Uchida appeared to have received
inspiration for his design from the gate tower on Cambridge
University’ s campus, but the dynamic design of the Auditorium
is quite unique. Tiled in reddish brown-colored bricks, it can be said
to strongly represent structures existing during the Taisho period
around the time of the GreatKanto Earthquake (1923). Between
2013 and 2014, it experienced a large-scale seismic retrofitting to
make the ceilings resistant to earthquakes without changes on the
exterior of the building.
back to the mapSource of photo : http://www.todaitomonokai.org/ http://ameblo.jp/sukaituri-634
6
Sanshiro Pond (1638)
Sanshiro Pond, formally known as Ikutokuen Shinji-ike, was
constructed in 1638 along with the surrounding Ikutokuen Garden
under the order of Toshitsune Maeda, 2nd Lord of the Kaga
Domain. After the death of Toshitsune, the Garden was restored by
Tsunanori Maeda, 4th Lord of the Kaga. It was ranked number one
among gardens created by feudal lords at their residences in Edo.
The pond came to be widely known as Sanshiro Pond after the
publication of the novel Sanshiro by Soseki Natsume. In the novel,
the pond is depicted as the place where the protagonist first meets
the woman he admires.
back to the mapSource of photo : http://fukutake.iii.u-tokyo.ac.jp/
7
Architectural Design : Fumihiko Maki
STructural Design : Hanawa Structural Engineers
Structure : Steel
School of Law Bldg. (2004)
This new facility for the University’ s Law School is sited on
the highly public campus edge between the Akamon and Seimon
entry gates – what might be called the symbolic face of Tokyo
University. In anticipation of this building’ s change to public use
in the future, planning was conceived with as few fixed elements
as possible for greater flexibility. Within its context of mature trees
and monumental gothic architecture, the building’ s small volume
and its screen-like translucency symbolize a new openness for
the campus.
back to the mapSource of photo : http://www.maki-and-associates.co.jp/ http://axona-aichi.com/
8
Architectural Design : Tadao Ando
Structural Design : Yoshiharu Kanebako
Structure : RC
Fukutake Hall (2008)
The design of the façade is modeled on the Sanjusangendo
Temple in Kyoto, which also has a distinctively long, narrow form.
The height of the above-ground portion is restricted so as not to
interfere with the scenery provided by the magnificent old camphor
trees that line the campus boundary. A concrete wall runs the entire
length of the building on the side facing inwards towards the rest of
the campus. Using the prestressed concrete for the façade and the
roof, it made the concrete structures’ potential expanded.
back to the mapSource of photo : http://fukutake.iii.u-tokyo.ac.jp/
99
Akamon (Gate) (1827)
Akamon Gate was constructed in the traditional gate style called
yakui-mon and painted red, as was the conventional practice when
receiving a shogun’ s daughter as a bride. A design featuring an
arched gable with undulating bargeboards (a style called kara-hafu)
together with two guard posts on the sides of the gate was a style of
the highest rank and allowed only for lords with 100,000 or more
koku (unit of measurement for the assessment of wealth). Akamon
is the only goshuden-mon still in existence and was registered as a
National Treasure before World War II.
back to the mapSource of photo : http://fukutake.iii.u-tokyo.ac.jp/
1010
Architectural Design : Hisao Kouyama
Structure : RC
Ito International Center / Ito Hall (2012)
Designed by Mr. Hisao Kohyama, Emeritus Professor of the
University of Tokyo, the Ito International Research Center will
welcome visitors to the University of Tokyo campus coming from
Hongo Street. The Sakura Square, located in front of the Center,
will contribute to the recovery of natural environment on campus,
and provide opportunities for intellectual encounters. The external
features of the Ito International Research Center comprises brick
design from first through fourth level, and metal panels for the
fifth floor. The division of design is aimed at matching the campus’
Uchida Gothic architecture.
back to the mapSource of photo : http://www.u-tokyo.ac.jp/ext01/iirc/
11
Architectural Design : Kengo Kuma
Structure : Steel
Daiwa Ubiquitous Computing Research Center (2014)
The building was donated by Daiwa House Industry Co. and
serves as an educational and research center for ubiquitous
computing at the University’ s Interfaculty Initiative for
Information Studies. Designed by renowned architect and
University of Tokyo Professor Kengo Kuma, this high-tech facility
also features a mud wall on the side facing Kaitokukan’ s garden
made by Hida-Takayama plaster craftsman Shuhei Hasado, and a
Japanese confectionery café operated by Iron Chef Japanese Jun
Kuroki. Adjacent to the café is an outdoor plaza, which lends to the
building a sense of openness.
back to the mapSource of photo : http://kkaa.co.jp/ http://main-dish.com/2015/01/19/kurogi/