european technical approvals - elsa - ipsc -...
TRANSCRIPT
![Page 1: European Technical Approvals - ELSA - IPSC - JRCelsa.jrc.ec.europa.eu/eurocodes2006/pdf/pres070.pdf · • ETAG drafted by EOTA (with help of industry) upon mandate from EC/EFTA:](https://reader034.vdocuments.us/reader034/viewer/2022042800/5a7426117f8b9aa3618b9191/html5/thumbnails/1.jpg)
European Organisation for Technical Approvals
European Technical Approvals
![Page 2: European Technical Approvals - ELSA - IPSC - JRCelsa.jrc.ec.europa.eu/eurocodes2006/pdf/pres070.pdf · • ETAG drafted by EOTA (with help of industry) upon mandate from EC/EFTA:](https://reader034.vdocuments.us/reader034/viewer/2022042800/5a7426117f8b9aa3618b9191/html5/thumbnails/2.jpg)
2JRC 11/06www.eota.be
CPD and ETAs
Why and when ETAs ?
Content of ETAs
ETAGs and CUAPs
Basis for ETAs
ETAs and Eurocodes
ETAs
CPD and ETAsWhy and when ETAs?On which basis?Relations with Eurocodes?
![Page 3: European Technical Approvals - ELSA - IPSC - JRCelsa.jrc.ec.europa.eu/eurocodes2006/pdf/pres070.pdf · • ETAG drafted by EOTA (with help of industry) upon mandate from EC/EFTA:](https://reader034.vdocuments.us/reader034/viewer/2022042800/5a7426117f8b9aa3618b9191/html5/thumbnails/3.jpg)
3JRC 11/06www.eota.be
CPD and ETAs
Why and when ETAs ?
Content of ETAs
ETAGs and CUAPs
Basis for ETAs
ETAs and Eurocodes
CPD –essential requirements
For the design and execution of works.Expressed in terms of generalobjectives:1. Mechanical resistance and stability2. Safety in case of fire3. Hygiene, health and the environment4. Safety in use5. Protection against noise6. Energy, economy and heath retention
Subject of regulations and technicalrules of Member States
![Page 4: European Technical Approvals - ELSA - IPSC - JRCelsa.jrc.ec.europa.eu/eurocodes2006/pdf/pres070.pdf · • ETAG drafted by EOTA (with help of industry) upon mandate from EC/EFTA:](https://reader034.vdocuments.us/reader034/viewer/2022042800/5a7426117f8b9aa3618b9191/html5/thumbnails/4.jpg)
4JRC 11/06www.eota.be
CPD and ETAs
Why and when ETAs ?
Content of ETAs
ETAGs and CUAPs
Basis for ETAs
ETAs and Eurocodes
CPD – responsabilities of member states
Regulations on WorksTechnical rules for the design and execution of worksChoice of ERs contained in suchregulations and technical rulesSafety levels with regard to the fulfilment of ERs
![Page 5: European Technical Approvals - ELSA - IPSC - JRCelsa.jrc.ec.europa.eu/eurocodes2006/pdf/pres070.pdf · • ETAG drafted by EOTA (with help of industry) upon mandate from EC/EFTA:](https://reader034.vdocuments.us/reader034/viewer/2022042800/5a7426117f8b9aa3618b9191/html5/thumbnails/5.jpg)
5JRC 11/06www.eota.be
CPD and ETAs
Why and when ETAs ?
Content of ETAs
ETAGs and CUAPs
Basis for ETAs
ETAs and Eurocodes
CPD – Europ. Techn. Specificationsfor construction products
Covering all product characteristicsneeded in one, several or all MemberStatesMethods for verification and evaluation of these characteristicsDifferent levels or classes of performanceOption « No performance determined » for characteristicswhich are not in all Member States needed or not for all usesIndication of threshold values wherenecessary for technical reasons
![Page 6: European Technical Approvals - ELSA - IPSC - JRCelsa.jrc.ec.europa.eu/eurocodes2006/pdf/pres070.pdf · • ETAG drafted by EOTA (with help of industry) upon mandate from EC/EFTA:](https://reader034.vdocuments.us/reader034/viewer/2022042800/5a7426117f8b9aa3618b9191/html5/thumbnails/6.jpg)
6JRC 11/06www.eota.be
CPD and ETAs
Why and when ETAs ?
Content of ETAs
ETAGs and CUAPs
Basis for ETAs
ETAs and Eurocodes
CPD – Creating a single Europeanmarket for construction products
« Regulatory » productcharacteristics are laid down in European technical specifications• Harmonised standard (hEN)
Prepared by CENMandate by European Commision
• European Technical ApprovalIssued by EOTA member
CE – marking of products based on hEN or ETA• Accompanied by information on product
performances• Declared values and classes
![Page 7: European Technical Approvals - ELSA - IPSC - JRCelsa.jrc.ec.europa.eu/eurocodes2006/pdf/pres070.pdf · • ETAG drafted by EOTA (with help of industry) upon mandate from EC/EFTA:](https://reader034.vdocuments.us/reader034/viewer/2022042800/5a7426117f8b9aa3618b9191/html5/thumbnails/7.jpg)
7JRC 11/06www.eota.be
CPD and ETAs
Why and when ETAs ?
Content of ETAs
ETAGs and CUAPs
Basis for ETAs
ETAs and Eurocodes
CPD and ETAs
CPD
Construction product to market
HARM STD ETAG
ETA
ETA withoutETAG
RecognizedNat. Tech.
Specification
AC
CE marking
![Page 8: European Technical Approvals - ELSA - IPSC - JRCelsa.jrc.ec.europa.eu/eurocodes2006/pdf/pres070.pdf · • ETAG drafted by EOTA (with help of industry) upon mandate from EC/EFTA:](https://reader034.vdocuments.us/reader034/viewer/2022042800/5a7426117f8b9aa3618b9191/html5/thumbnails/8.jpg)
8JRC 11/06www.eota.be
CPD and ETAs
Why and when ETAs ?
Content of ETAs
ETAGs and CUAPs
Basis for ETAs
ETAs and Eurocodes
What is an ETA?
ETA = European Technical ApprovalETA = Approval procedure• Favourable technical assessment of
« fitness for use of a product for an intended use », based on the fulfilmentof the ERs for building works for whichthe product is used
ETA = Document specifying the product• Technical specification of the assessed
product
ETA = Basis for the CE marking• Reference document for the CE marking
and the accompanying information on the « regulatory » characteristics and performances of the product
![Page 9: European Technical Approvals - ELSA - IPSC - JRCelsa.jrc.ec.europa.eu/eurocodes2006/pdf/pres070.pdf · • ETAG drafted by EOTA (with help of industry) upon mandate from EC/EFTA:](https://reader034.vdocuments.us/reader034/viewer/2022042800/5a7426117f8b9aa3618b9191/html5/thumbnails/9.jpg)
9JRC 11/06www.eota.be
CPD and ETAs
Why and when ETAs ?
Content of ETAs
ETAGs and CUAPs
Basis for ETAs
ETAs and Eurocodes
Content of ETAs
Description of the product and intended use“Regulatory” product characteristics expressed in harmonized European terms (eg loadbearing capacity)Provisions on• use and installation of the product, as far
as relevant• evaluation and attestation of conformity
tasks of manufacturertasks of notified bodies to be involved for testing, inspection and certification (where relevant)
• CE marking and accompanying information on product characteristics and performances
![Page 10: European Technical Approvals - ELSA - IPSC - JRCelsa.jrc.ec.europa.eu/eurocodes2006/pdf/pres070.pdf · • ETAG drafted by EOTA (with help of industry) upon mandate from EC/EFTA:](https://reader034.vdocuments.us/reader034/viewer/2022042800/5a7426117f8b9aa3618b9191/html5/thumbnails/10.jpg)
10JRC 11/06www.eota.be
CPD and ETAs
Why and when ETAs ?
Content of ETAs
ETAGs and CUAPs
Basis for ETAs
ETAs and Eurocodes
What is an ETA?
ETA =• Valid for 5 years in the 27
member states of EU + EFTA• Mainly for innovative or products
of a single producer
ETA ≠• An attestation of conformity or
certification
![Page 11: European Technical Approvals - ELSA - IPSC - JRCelsa.jrc.ec.europa.eu/eurocodes2006/pdf/pres070.pdf · • ETAG drafted by EOTA (with help of industry) upon mandate from EC/EFTA:](https://reader034.vdocuments.us/reader034/viewer/2022042800/5a7426117f8b9aa3618b9191/html5/thumbnails/11.jpg)
11JRC 11/06www.eota.be
CPD and ETAs
Why and when ETAs ?
Content of ETAs
ETAGs and CUAPs
Basis for ETAs
ETAs and Eurocodes
Why and when ETAs?
ProductFor which:• There is no harmonised standard• There is no recognised national standard• There is no mandate for European
standard• The EC considers that a standard cannot
or cannot yet be elaboratedWhich differs significantly fromharmonised or recognized national standardsEC degoration, even when there is a mandate for a standard
When ETA? < CPD (art. 8)
![Page 12: European Technical Approvals - ELSA - IPSC - JRCelsa.jrc.ec.europa.eu/eurocodes2006/pdf/pres070.pdf · • ETAG drafted by EOTA (with help of industry) upon mandate from EC/EFTA:](https://reader034.vdocuments.us/reader034/viewer/2022042800/5a7426117f8b9aa3618b9191/html5/thumbnails/12.jpg)
12JRC 11/06www.eota.be
CPD and ETAs
Why and when ETAs ?
Content of ETAs
ETAGs and CUAPs
Basis for ETAs
ETAs and Eurocodes
ETA – for which products?
Construction product• Intended to be incorporated permanently in
works• Relevant for fulfilment of ERs
Product not or not yet covered by a hEN• Standard cannot (yet) be elaborated• Deviation from standard• Standard under preparation (interim solution)
In particular for new, innovative, complex• Products or product types• Intended uses (incl. systems and kits)• Assessment conditions
Complementarity with CEN standardization
![Page 13: European Technical Approvals - ELSA - IPSC - JRCelsa.jrc.ec.europa.eu/eurocodes2006/pdf/pres070.pdf · • ETAG drafted by EOTA (with help of industry) upon mandate from EC/EFTA:](https://reader034.vdocuments.us/reader034/viewer/2022042800/5a7426117f8b9aa3618b9191/html5/thumbnails/13.jpg)
13JRC 11/06www.eota.be
CPD and ETAs
Why and when ETAs ?
Content of ETAs
ETAGs and CUAPs
Basis for ETAs
ETAs and Eurocodes
Opportunities through the ETA
Measure-made technical specification for individual product• Manufacturer has own technical
specification for his product• Official reference document for CE
marking • ETA can include specific installation and
application conditions
Reduced costs for the attestation of conformity• Product characteristics and performances
are evaluated on the basis of the approval testing
• Further type-testing is not necessary for this purpose
![Page 14: European Technical Approvals - ELSA - IPSC - JRCelsa.jrc.ec.europa.eu/eurocodes2006/pdf/pres070.pdf · • ETAG drafted by EOTA (with help of industry) upon mandate from EC/EFTA:](https://reader034.vdocuments.us/reader034/viewer/2022042800/5a7426117f8b9aa3618b9191/html5/thumbnails/14.jpg)
14JRC 11/06www.eota.be
CPD and ETAs
Why and when ETAs ?
Content of ETAs
ETAGs and CUAPs
Basis for ETAs
ETAs and Eurocodes
ETA combines innovation and CE-marking
Easy and fast route to the European market and the CE marking• ETA gives benefits of CE marking also
when hEN is not or not yet available • ETA allows Europe-wide market
introduction of non-standardized products
• No costs for participation in standardization work
ETA facilitates development of new and innovative products• Allows consideration of regulatory
context of MS also where hEN can not be set up, or existing hEN is not applicable
• Possible integration of the approval procedure in the product development phase
![Page 15: European Technical Approvals - ELSA - IPSC - JRCelsa.jrc.ec.europa.eu/eurocodes2006/pdf/pres070.pdf · • ETAG drafted by EOTA (with help of industry) upon mandate from EC/EFTA:](https://reader034.vdocuments.us/reader034/viewer/2022042800/5a7426117f8b9aa3618b9191/html5/thumbnails/15.jpg)
15JRC 11/06www.eota.be
CPD and ETAs
Why and when ETAs ?
Content of ETAs
ETAGs and CUAPs
Basis for ETAs
ETAs and Eurocodes
Comparison of ETA with hEN
Standards• General
specification• Applicable for a
whole range of products (according to scope)
• Reflects the market situation on a larger scale
• Cover mostly traditional building materials and products
• Represent acknowledged state of the art
Approvals• Individual
specification• Tailor-made for
individual product, unique
• For specific market needs of a manufacturer
• Mostly for new and innovative products or systems (kits)
• Represent state of the art, facilitate innovation
![Page 16: European Technical Approvals - ELSA - IPSC - JRCelsa.jrc.ec.europa.eu/eurocodes2006/pdf/pres070.pdf · • ETAG drafted by EOTA (with help of industry) upon mandate from EC/EFTA:](https://reader034.vdocuments.us/reader034/viewer/2022042800/5a7426117f8b9aa3618b9191/html5/thumbnails/16.jpg)
16JRC 11/06www.eota.be
CPD and ETAs
Why and when ETAs ?
Content of ETAs
ETAGs and CUAPs
Basis for ETAs
ETAs and Eurocodes
Basis for issuing ETAs
Common assessment criteria established by EOTA• European Technical Approval Guideline
(ETAG)For whole product familyMany ETA applications to be expectedPrepared on the basis of a Commission mandate
• Common Understanding (of EOTA member bodies) on the Assessment Procedure (CUAP)
For an individual product of a particular applicantNot many applications to be expectedReferred to as “Art. 9.2 procedure”
Common Procedural Rules
![Page 17: European Technical Approvals - ELSA - IPSC - JRCelsa.jrc.ec.europa.eu/eurocodes2006/pdf/pres070.pdf · • ETAG drafted by EOTA (with help of industry) upon mandate from EC/EFTA:](https://reader034.vdocuments.us/reader034/viewer/2022042800/5a7426117f8b9aa3618b9191/html5/thumbnails/17.jpg)
17JRC 11/06www.eota.be
CPD and ETAs
Why and when ETAs ?
Content of ETAs
ETAGs and CUAPs
Basis for ETAs
ETAs and Eurocodes
ETAGs and CUAPs (2)
ETAGs and CUAPs:• ETAG (and CUAPs) describe “how to
assess, in an harmonised way, products of a particular product family”, so that the result (CE marked product through ETA) can be brought to the market without further regulatory requirements from any Member State
• ETAG drafted by EOTA (with help of industry) upon mandate from EC/EFTA: guarantee that all regulated characteristics are taken into consideration
• ETAGs and CUAPs are binding for all Approval Bodies, regrouped in EOTA
![Page 18: European Technical Approvals - ELSA - IPSC - JRCelsa.jrc.ec.europa.eu/eurocodes2006/pdf/pres070.pdf · • ETAG drafted by EOTA (with help of industry) upon mandate from EC/EFTA:](https://reader034.vdocuments.us/reader034/viewer/2022042800/5a7426117f8b9aa3618b9191/html5/thumbnails/18.jpg)
18JRC 11/06www.eota.be
CPD and ETAs
Why and when ETAs ?
Content of ETAs
ETAGs and CUAPs
Basis for ETAs
ETAs and Eurocodes
ETAGs and CUAPs (3)
ETAGs and CUAPs: how to assess• on the basis of available test and
calculation methods resulting from CEN/CENELEC (prENs, ENs, also Eurocodes), ISO, national standards, “old” national approval work in voluntary or mandatory field or from research activities
• sometimes development of totally new EOTA methods, if need be (e.g. EOTA Technical report)
• limitation: it must always correspond to/linked to a regulatory framework in at least 1 MS
![Page 19: European Technical Approvals - ELSA - IPSC - JRCelsa.jrc.ec.europa.eu/eurocodes2006/pdf/pres070.pdf · • ETAG drafted by EOTA (with help of industry) upon mandate from EC/EFTA:](https://reader034.vdocuments.us/reader034/viewer/2022042800/5a7426117f8b9aa3618b9191/html5/thumbnails/19.jpg)
19JRC 11/06www.eota.be
CPD and ETAs
Why and when ETAs ?
Content of ETAs
ETAGs and CUAPs
Basis for ETAs
ETAs and Eurocodes
ETAG and CUAPs (4)
Scope: Definition and internal use of the construction productCharacteristics of the product and methods of verification(What to evaluate and how to evaluate and how to express the result)Attestation and evaluation of conformity and CE marking• EC Decision• tasks for NB and manufacturer
Assumptions under which the fitness for the intended use is assessed(installation, maintenance, design, …)Add 1. Content and format of ETAs issued on the basis of this ETAG/CUAP
![Page 20: European Technical Approvals - ELSA - IPSC - JRCelsa.jrc.ec.europa.eu/eurocodes2006/pdf/pres070.pdf · • ETAG drafted by EOTA (with help of industry) upon mandate from EC/EFTA:](https://reader034.vdocuments.us/reader034/viewer/2022042800/5a7426117f8b9aa3618b9191/html5/thumbnails/20.jpg)
20JRC 11/06www.eota.be
CPD and ETAs
Why and when ETAs ?
Content of ETAs
ETAGs and CUAPs
Basis for ETAs
ETAs and Eurocodes
ETAGs and CUAPs (5)
6 ERs FOR WORKS TO BE FOUND
IN REGULATIONS OF M.S.6 ERs FOR WORKS TO BE FOUND
IN REGULATIONS OF M.S.
IDs for works /products and Mandates
IDs for works /products and Mandates
ETAGs < mandate EC/EFTAETAGs < mandate EC/EFTA
CUAPs <direct input Approval BodiesCUAPs <direct input Approval Bodies
which characteristics to assess in ETAs in view of regulations on 6 ERs in M.S. and how to assess (in an harmonised way) so that the result (CE marked product through ETA) can be brought to the market without further regulatory requirements
![Page 21: European Technical Approvals - ELSA - IPSC - JRCelsa.jrc.ec.europa.eu/eurocodes2006/pdf/pres070.pdf · • ETAG drafted by EOTA (with help of industry) upon mandate from EC/EFTA:](https://reader034.vdocuments.us/reader034/viewer/2022042800/5a7426117f8b9aa3618b9191/html5/thumbnails/21.jpg)
21JRC 11/06www.eota.be
CPD and ETAs
Why and when ETAs ?
Content of ETAs
ETAGs and CUAPs
Basis for ETAs
ETAs and Eurocodes
Regulatory requirements of all MSs to consider
ETAGETAGETAG(CUAP)ETAG
(CUAP)
![Page 22: European Technical Approvals - ELSA - IPSC - JRCelsa.jrc.ec.europa.eu/eurocodes2006/pdf/pres070.pdf · • ETAG drafted by EOTA (with help of industry) upon mandate from EC/EFTA:](https://reader034.vdocuments.us/reader034/viewer/2022042800/5a7426117f8b9aa3618b9191/html5/thumbnails/22.jpg)
22JRC 11/06www.eota.be
CPD and ETAs
Why and when ETAs ?
Content of ETAs
ETAGs and CUAPs
Basis for ETAs
ETAs and Eurocodes
Choice of the manufacturer depending on the countries in which he intends to put the product on the market:
- by product characteristics retained in the assessment (NPD option) or - by levels and classes of performance obtained
ETAETA
![Page 23: European Technical Approvals - ELSA - IPSC - JRCelsa.jrc.ec.europa.eu/eurocodes2006/pdf/pres070.pdf · • ETAG drafted by EOTA (with help of industry) upon mandate from EC/EFTA:](https://reader034.vdocuments.us/reader034/viewer/2022042800/5a7426117f8b9aa3618b9191/html5/thumbnails/23.jpg)
23JRC 11/06www.eota.be
CPD and ETAs
Why and when ETAs ?
Content of ETAs
ETAGs and CUAPs
Basis for ETAs
ETAs and Eurocodes
ExperienceState of the art
Time
Complementarity of ETA/hEN
From ETA(G) to hEN
More a
pplic
ation
s,
varia
nts,
diff.
uses
Who
le pr
oduc
t fam
ily
Several“clustered”
CUAPs
ETAG
hEN (possibly)
CUAP
First
appli
catio
n
![Page 24: European Technical Approvals - ELSA - IPSC - JRCelsa.jrc.ec.europa.eu/eurocodes2006/pdf/pres070.pdf · • ETAG drafted by EOTA (with help of industry) upon mandate from EC/EFTA:](https://reader034.vdocuments.us/reader034/viewer/2022042800/5a7426117f8b9aa3618b9191/html5/thumbnails/24.jpg)
24JRC 11/06www.eota.be
CPD and ETAs
Why and when ETAs ?
Content of ETAs
ETAGs and CUAPs
Basis for ETAs
ETAs and Eurocodes
ETAs and Eurocodes
Eurocodes are supporting standards for the assessment of ER1 or ER2Mentioned in ETAGs and CUAPs, whererelevantBasis for indication in ETAs: EC GP L (3 options)Usually option 2 is prefered in ETAsi.e indicate the characteristic values,sometimes design values with indication of used safety factorsProblems:
- multitude of NDPs- complex products
(eg building kits)
![Page 25: European Technical Approvals - ELSA - IPSC - JRCelsa.jrc.ec.europa.eu/eurocodes2006/pdf/pres070.pdf · • ETAG drafted by EOTA (with help of industry) upon mandate from EC/EFTA:](https://reader034.vdocuments.us/reader034/viewer/2022042800/5a7426117f8b9aa3618b9191/html5/thumbnails/25.jpg)
25JRC 11/06www.eota.be
CPD and ETAs
Why and when ETAs ?
Content of ETAs
ETAGs and CUAPs
Basis for ETAs
ETAs and Eurocodes
ETAs and Eurocodes
For some (mostly innovative) products, no European design codes available: development of own EOTA method(eg in ETAG on metal anchors)
Or develop with CEN/TC 250 prenormative codes, with indicationof product characteristics to befound in the ETAs
![Page 26: European Technical Approvals - ELSA - IPSC - JRCelsa.jrc.ec.europa.eu/eurocodes2006/pdf/pres070.pdf · • ETAG drafted by EOTA (with help of industry) upon mandate from EC/EFTA:](https://reader034.vdocuments.us/reader034/viewer/2022042800/5a7426117f8b9aa3618b9191/html5/thumbnails/26.jpg)
26JRC 11/06www.eota.be
CPD and ETAs
Why and when ETAs ?
Content of ETAs
ETAGs and CUAPs
Basis for ETAs
ETAs and Eurocodes
Further information:e.g. - full text of ETAGs
- list of all valid ETAs
Website: www.eota.be orMail to [email protected]