ethernetethernet digital i/o digital i/o digital i/o...

Infosystem®

Copyright © 2003~2015

Infosystem Technology Corporation, Ltd.

2F, No. 57, Lane 53, Dongnan St.

Hsinchu, Taiwan 300, R.O.C.

TEL: +886-3-562-7187

FAX: +886-3-561-1435

Service E-mail: [email protected]

Web page URL:http://www.infosystem.com.tw

EEIIOO--DD --221100MMLL

User ManualUser ManualUser ManualUser Manual

Version 1.0Version 1.0Version 1.0Version 1.0

Infosystem Technology Corporation, Ltd.Infosystem Technology Corporation, Ltd.Infosystem Technology Corporation, Ltd.Infosystem Technology Corporation, Ltd.

EthernetEthernetEthernetEthernet Digital I/O Digital I/O Digital I/O Digital I/O

Infosystem®

Digital Ethernet I/O Module EIO-D-210ML

(Preliminary Version)

Index 1. Index ．．．．．．．．．．．．．．．．．．．．．．．．．．．． 1.

2. Disclaimers ．．．．．．．．．．．．．．．．．．．．．．．．．． 3.

A. Warranty ．．．．．．．．．．．．．．．．．．．．．．．．． 4.

B. Trademark ．．．．．．．．．．．．．．．．．．．．．．．． 4.

3. Product Information ．．．．．．．．．．．．．．．．．．．．．．． 5.

A. Introduction ．．．．．．．．．．．．．．．．．．．．．．．． 5.

B. Features ．．．．．．．．．．．．．．．．．．．．．．．．． 6.

4. Exterior ．．．．．．．．．．．．．．．．．．．．．．．．．．． 7.

A. Overview ．．．．．．．．．．．．．．．．．．．．．．．．． 7.

B. Front Panel ．．．．．．．．．．．．．．．．．．．．．．．． 8.

C. Dimension ．．．．．．．．．．．．．．．．．．．．．．．． 8.

5. Specifications ．．．．．．．．．．．．．．．．．．．．．．．．． 9.

A. Basic Specifications ．．．．．．．．．．．．．．．．．．．．． 9.

B. Digital Input Specification ．．．．．．．．．．．．．．．．．．． 10.

C. Digital Output Specification ．．．．．．．．．．．．．．．．．． 11.

D. LED Indicator and Switch Description ．．．．．．．．．．．．．． 12.

E. Wiring ．．．．．．．．．．．．．．．．．．．．．．．．． 14.

F. ModBus Holding Register Definition ．．．．．．．．．．．．．．． 17.

6. Software Installation ．．．．．．．．．．．．．．．．．．．．．．． 19.

A. Install ．．．．．．．．．．．．．．．．．．．．．．．．． 19.

- Step 1: Insert the CD and click the button ．．．．．．．．．．． 19.

- Step 2: Click the Link of the Page ．．．．．．．．．．．．． 20.

- Step 3: Press Next to Continue ．．．．．．．．．．．．．． 21.

- Step 4: Decide the Application Directory ．．．．．．．．．．． 22.

- Step 5: Create the Directory if not existent ．．．．．．．．．． 23.

- Step 6: Create Program’s Shortcut ．．．．．．．．．．．．． 24.

- Step 7: Decide if Desktop icon needed ．．．．．．．．．．．． 25.

- Step 8: Press Install to start installation ．．．．．．．．．．． 26.

- Step 9: Process Installations ．．．．．．．．．．．．．．． 27.

- Step 10: Finish Installation ．．．．．．．．．．．．．．． 28.

1.

Infosystem®

Digital Ethernet I/O Module EIO-D_210ML


B. Uninstall ．．．．．．．．．．．．．．．．．．．．．．．．． 29.

- Step 1: Execute Uninstall Program ．．．．．．．．．．．．． 20.

- Step 2: Click “Yes” to process ．．．．．．．．．．．．．．． 30.

- Step 3: Finished ．．．．．．．．．．．．．．．．．．．． 30.

7. Configuration．．．．．．．．．．．．．．．．．．．．．．．．．． 31.

A. By Browser ．．．．．．．．．．．．．．．．．．．．．．．． 31.

- Step 1: Ready to login ．．．．．．．．．．．．．．．．． 31.

- Step 2: Configure your parameters ．．．．．．．．．．．．． 32.

- Step 3: Finish and reboot ．．．．．．．．．．．．．．．． 33.

B. By Setup Tools ．．．．．．．．．．．．．．．．．．．．．． 34.

- Step 1: Searching the devices ．．．．．．．．．．．．．．． 34.

- Step 2: Double click the selected item ．．．．．．．．．．．． 34.

- Step 3: Configure and update your parameters ．．．．．．．．． 35.

C. By Direct Broadcast Commands ．．．．．．．．．．．．．．．． 36.

- Command List A ．．．．．．．．．．．．．．．．．．．． 36.

- Command List B ．．．．．．．．．．．．．．．．．．． 37.

- Command List C ．．．．．．．．．．．．．．．．．．． 38.

8. Application Notes ．．．．．．．．．．．．．．．．．．．．．．．． 39.

A. Description ．．．．．．．．．．．．．．．．．．．．．．． 39.

B. Disable Firewall of Windows XP SP2 ．．．．．．．．．．．．．． 39.

- Step 1: Execute "Windows Firewall" ．．．．．．．．．．．．． 39.

- Step 2: Close the Firewall ．．．．．．．．．．．．．．．． 40.

C. Make Program exception for Firewall ．．．．．．．．．．．．．．． 41.

- Step 1: Choose "Exception" ．．．．．．．．．．．．．．． 41.

- Step 2: Add on New Program ．．．．．．．．．．．．．．． 42.

- Step 3: Allow "Accept Any Computer" ．．．．．．．．．．．． 43.

- Step 3: Finished ．．．．．．．．．．．．．．．．．．．． 44.

2.

Infosystem®



Disclaimers

The information in this manual has been carefully checked

and is believed to be accurate. Infosystem Technology

Corporation, Ltd. assumes no responsibility for any

infringements of patents or other rights of third parties,

which may result from its use.

Infosystem assumes no responsibility for any inaccuracies

that may be contained in this document. Infosystem makes

no commitment to update or to keep current the

information contained in this manual.

Infosystem reserves the right to make improvements to this

document and/or product at any time without notice.

No part of this publication may be reproduced, stored in a

retrieval system, or transmitted in any form of or by any

means, electronic, mechanical, photocopying, recording, or

otherwise, without the prior written permission of


Copyright © 2003 - 2005


All rights reserved. Printed in Taiwan.

3.

Infosystem®



Warranty

All products manufactured by Infosystem are warranted

against defective materials for a period of one year from the

date of delivery to the original purchaser.

Trademark

The names used for identification only maybe registered

trademark of their respective companies.

4.

Infosystem®



Product Information

A. Introduction

EIO is an I/O controller product with Ethernet on its

data communication and makes data acquisition easier

through ModBus/TCP protocol on an existing Ethernet

network. For different conditions, EIO basically has

been design into four models. EIO-R is Relay I/O

Controller. EIO-A is Analog I/O. EIO-D is Digital I/O.

And EIO-T is Thermo Coupler I/O Controller. By using

these products, the controlling and monitoring of

distributed control system can easily be accomplished.

EIO-D-210ML uses 8051’s family microprocessor for

implementing Ethernet functions. It uses the state

machine to handle TCP/IP stack with most but limited

functions because of the limited resources.

EIO-D-210ML supports ARP, ICMP, TCP, UDP, IP,

DHCP-Client and even HTTP protocols. You can use

any browsers to set the parameters, or just use the

commands in console mode. With no doubt,

EIO-D-210ML will bring you the best integration in

your applications.

5.

Infosystem®



Product Information

B. Features � Easy Configuration Setting

� Use Setup Tools to Configure the Settings

� Use HTTP, IE/Netscape Browser for Setting

� Good Security Concerned � Setup Login in Password Protect

� Access Password Protect

� High Reliability � Stable and Robust

� Working 24Hours per day

� Support Necessary Network Protocols � ARP, ICMP, TCP, UDP, IP, DHCP Client, HTTP

� Support ModBus Protocol � ModBus/TCP, ModBus/RTU, ModBus/ASCII

� Easy integration with HMI/SCADA or OPC Server

� High Reliability � Stable and Robust

� Working 24Hours per day

� Isolation � Photo Coupler Isolated Inputs

� Photo Coupler Isolated Outputs

� Input / Output � DC 24V Input x 12

� DC 24V Output x 6

6.

Infosystem®



Exterior

A. Overview

Serial

PortDigital

Input

LED

Indicator

Digital Output DC 24V

Power InputDip Switch

Serial

PortDigital

Input

LED

Indicator

Digital Output DC 24V

Power InputDip Switch

7.

Infosystem®



Exterior B. Front Panel

a. Connector 1 (CONN1)

b. Ethernet 10/100MBaseT RJ45 Connector

c. LED Indication

d. Connector 2 (CONN2)

C. Dimension

(UNIT: mm)4 xψ3.0

50.0

102.0

80.094.0

9.0

33.0

(UNIT: mm)4 xψ3.0

50.0

102.0

80.094.0

9.0

33.0

8.

Infosystem®



Specifications

A. Basic Specifications

Entry Description

Communication Interface Ethernet 10/100M BaseT, RJ-45

Protocol

ARP, ICMP, TCP, UDP, IP, DHCP Client,

HTTP, Modbus/TCP Slave, Modbus/RTU,

Modbus/ASCII

Reset Built-in reset key to restore the defaults

Watch Dog Timer Built-in hardware auto reset function

Discrete I/O 10 points, DC 24V Input

8 points, DC 0.5A Output

Led Indication SYS x1 (Red), LINK x1 (Green)

Power Requirement 24V DC

Power consumption < 1W

Operation: 0ºC~+55º C (32ºF~+131ºF) Temperature

Storage: -20ºC~+70ºC (-4ºF~+158ºF)

Humidity 15% to 95% (non-condensing)

Dimension 100mm x 68mm x 25mm

Configuration Web Browser, Windows Utility via Ethernet

9.

Infosystem®



Specifications

B. Digital Input Specifications

Entry Description

Number of Input Points 10 points

Isolated Method Photo Coupler

Rated Input Voltage 24V DC

Rated Input Current 7 mA

Operation Voltage Range 21.6V DC ~ 26.4V DC

Turn ON State 12V DC / 2 mA or higher

Turn OFF State 4V DC / 1 mA or lower

Input Impedance Approx. 3.9 KΩ

OFF � ON 8 msec or less (24 VDC) Response Time

ON � OFF 8 msec or less (24 VDC)

Common Terminal Arrangement 12 points / common

Internal Current Consumption MAX. 100 mA (type, all points ON)

10.

Infosystem®



Specifications

C. Digital Output Specifications

Entry Description

Number of Input Points 8 points

Isolated Method Photo Coupler

Rated Load Voltage 24V DC

Operation Voltage Range 21.6V DC ~ 26.4V DC

Type NPN / Sink

Max. Load Current 0.5 A/pt

Leakage Current at OFF Circuit 0.1 mA or less

Max. Voltage Drop at ON Circuit 1.5V or less

OFF � ON 8 msec or less Response Time

ON � OFF 8 msec or less

Common Terminal Arrangement 6 points / common

Voltage 24V DC (21.6V DC ~ 26.4V DC) External Power Supply

Current 100 mA

International Current Consumption 100 mA (type, all points on)

11.

Infosystem®



Specifications

D. LED Indicator and Switch Description – Box View –

12.

Infosystem®



Specifications

D. LED Indicator and Switch Description – Description – LED Indicator:

LED Description SYS The SYS LED blinks at a rate of 1.5Hz and indicating normal work.

LINK If ON, the Ethernet connection is activated.

13.

Infosystem®



Specifications

E. Wiring

Users may refer to the following diagram to connect the

external wiring for the EIO-D-210ML module.

Front Panel PIN Definition –

14.

Infosystem®



Specifications

E. Wiring – Equivalent Input Circuit –

15.

Infosystem®



Specifications

E. Wiring – Equivalent Output Circuit –

16.

Infosystem®



Specifications

F. ModBus Holding Register Definition

The discrete I/O points of the EIO-D-210ML can easily be controlled and

monitored through Modbus protocol. The Modbus address mapping with

discrete I/O is described as the followings.

– Output Address – The 8-points digital output of EIO-D-210ML is mapped with the Modbus

Coil Status “00001 ~ 00008”..

Output Status (Coil Status, ON=1, OFF=0)

Address Output

00001 DO1, OUT1

00002 DO2, OUT2

00003 DO3, OUT3

00004 DO4, OUT4

00005 DO5, OUT5

00006 DO6, OUT6

00007 DO7, OUT7

00008 DO8, OUT8

17.

Infosystem®



Specifications

F. ModBus Holding Register Definition

– Input Address – The 10-points digital input of EIO-D-210ML is mapped with the Modbus

Input Status “10001 ~ 10010”..

Input Status (Input Status, High=1, Low=0)

Address Input

10001 DI1, IN1

10002 DI2, IN2

10003 DI3, IN3

10004 DI4, IN4

10005 DI5, IN5

10006 DI6, IN6

10007 DI7, IN7

10008 DI8, IN8

10009 DI9, IN9

10010 DI10, IN10

18.

Infosystem®



Software Installation

A. Installation

Step 1: Insert the CD and click the button

The Software Installation CD that came with EIO-A-200 will

automatically be run after inserting it into the CD-ROM drive. Click

the “Ethernet converter Setup Utilities” button will bring the

installation page out,

Figure1. Software Install CD Auto-Run Screen Shot

19.

Infosystem®




A. Installation

Step 2: Click the Link of the Page

Click the Link of the Page to run the Ethernet Converter Setup Tools

Installation Software.

Figure2. Ethernet Converter Setup Tools Page

20.

Infosystem®




A. Installation

Step 3: Press Next to Continue

Figure3. Installation Welcome Message

– 3. Connect to Configuration Mode –

21.

Infosystem®




A. Installation

Step 4: Decide the Application Directory

Figure4. Decide the Application Directory

22.

Infosystem®




A. Installation

Step 5: Create the Directory if not existent

Figure5. Create Application Directory

23.

Infosystem®




A. Installation

Step 6: Create Program’s Shortcut

Figure6. Shortcut Creation

24.

Infosystem®




A. Installation

Step 7: Decide if Desktop icon needed

Figure7. Desktop Icon Creation

25.

Infosystem®




A. Installation

Step 8: Press Install to start installation

Figure8. Review the Installation Settings

26.

Infosystem®




A. Installation

Step 9: Process Installations

Figure9. Installing

27.

Infosystem®




A. Installation

Step 10: Finish Installation

Figure10. Installation Finished

28.

Infosystem®




B. Uninstall

Step 1: Execute Uninstall Program

Uninstall Program is located at the application directory named

“Uninstall Ethernet Converter Setup”. Execution of it could let the

Ethernet Converter Setup Tools clearly be removed.

Figure11. Decide the Application Directory

29.

Infosystem®




B. Uninstall

Step 2: Click “Yes” to process

Figure12. Process Uninstall

Step 3: Finished

Figure12. Process Uninstall

30.

Infosystem®



Configuration

A. By Browser

Step 1: Ready to login.

31.

Infosystem®



Configuration

A. By Browser

Step 2: Configure your parameters.

32.

Infosystem®



Configuration

A. By Browser

Step 3: Finish and reboot.

33.

Infosystem®



Configuration

B. By Setup Tools

Step 1: Searching the devices. Step 2: Double click the selected item.

34.

Infosystem®



Configuration

B. By Setup Tools

Step 3: Configure and update your parameters.

35.

Infosystem®



Configuration

C. By Direct Broadcast Commands

It needs broadcasting to handle all the configurations and it allows users to code their own application software.

– Command List A – User Level – – Command Description Notes

Purpose For Broadcast search

Syntax X <magic code>

Magic code 99.130.83.99

Return AX <MAC>/<IP>/<Device ID>

Send X 99.130.83.99

X or x

Example Back AX 0.128.200.255.251.242/192.168.1.1/1

Purpose Get all the parameters of the WM-110

Syntax G <MAC>/<IP>/<Setup Password>

Return All the parameters of the WM-110

Send G 0.128.200.255.251.242/192.168.1.1/123

CG for cancel

G or g

Example Back

AG<All Messages>

36.

Infosystem®



Configuration


User Level: For General Users Admin Level: For Factory Default Setting

– Command List B – User Level –

Command Description Notes

Purpose Set the parameters of WM-110

Syntax S <MAC>/<IP>/<Password>/<Parameter>/<Value>

A for accept Return

C for cancel

Send S 0.128.200.255.251.242/192.168.1.1/123/IP/192.168.1.2

S

Example Back A or C

Purpose Reboot WM-110

Syntax R <MAC>/<IP>/<Setup Password>

AR for accept Return

CR for cancel

Send R 0.128.200.255.251.242/192.168.1.1/123

R

Example Back AR or CR

37.

Infosystem®



Configuration


User Level: For General Users Admin Level: For Factory Default Setting

– Command List C – Admin Level –

Command Description Notes

Purpose Set MAC address of WM-110 then reboot automatically

Syntax M <Old MAC>/<New MAC>/<Factory Password>

AM for accept Return

CM for cancel

Send S 0.128.200.255.251.242/0.128.200.255.251.243/123

M

Example Back ‘A’ or ‘C’

Purpose Set IP for Factory settings

Syntax I <MAC>/<New IP>/<Factory Password>

AI for accept Return

CI for cancel

Send I 0.128.200.255.251.242/192.168.1.1/123’

I

Example Back AR or CR

38.

Infosystem®



Application Notes

A. Description:

Firewall will make the program off normal, so one might choose the following solutions to Firewall program, “Disable” or “Exception”.

B. Disable Firewall of Windows XP SP2.

Step 1: Execute "Windows Firewall" Execute “Windows Firewall” in Control Panel.

39.

Infosystem®



Application Notes

B. Disable Firewall of Windows XP SP2.

Step 2: Close the Firewall Choose “Close” to close firewall.

40.

Infosystem®



Application Notes

C. Make Program exception for Firewall

Step 1: Choose "Exception" Choose “Exception” in Firewall Program. And add on new program of Setup Tools.

41.

Infosystem®



Application Notes


Step 2: Add on New Program and Selection Choose “Setup Tools” to make it as an exception.

42.

Infosystem®



Application Notes


Step 3: Allow "Accept Any Computer" Allow “Accept Any Computer” to finish exception.

43.

Infosystem®



Application Notes


Step 4: Finished Finish Exception.

44.

ethernetethernet digital i/o digital i/o digital i/o...

Documents