ethernet
DESCRIPTION
TRANSCRIPT
CHAPTER CHAPTER
Practical Ethernet Practical Ethernet ImplementationImplementation
Chapter Objectives• Provide a background on Ethernet itself and
describe its characteristics• Explain the practical implementation of various
Ethernet LANs– 10BaseT, 10Base2 and 10Base5– Show sample networking devices and network
connections
• Introduce the 100 Mbps Ethernet that is also known as fast Ethernet
• Discuss the various operating systems for Ethernet networks
Chapter Modules
• Background on Ethernet• Ethernet Basic Characteristics• Overview of Implementation• IEEE Implementation of 10BaseT• IEEE Implementation of 10Base2• IEEE Implementation of 10Base5 • Fast (100 Mbps) Ethernet Networks• Network Operating Systems for Ethernet
Networks
© N. Ganesan, All rights
reserved.
MODULE
Background on Ethernet
Module Objectives
• Describe Ethernet in general• Trace the origin of Ethernet • Discuss the current status and
speeds
Ethernet Defined
• A highly standardized popular network architecture
• Based on the CSMA/CD transmission protocol
• It is a logical bus network that is implemented both as a physical star and a physical bus network
• Governed by the IEEE 802.3 standard
Origin
• CSMA/CD originated in Univ. of Hawaii in the 60s
• Cabling and signaling schemes were invented at Xerox
• Subsequently standardized by a group of companies– Xerox, Intel and DEC
Current Status
• Highly standardized• Standards set by IEEE 802
committee– IEEE 802.3
• Standards exists for different speeds of Ethernet implementations
Current Speeds
• 10 Mbps Ethernet– Example: 10BaseT
• 100 Mbps Ethernet– Example: 100BaseTX
• 1 Gigabit Ethernet– New and evolving network technology
• 10 Gigabits Ethernet is currently emerging
END OF MODULEEND OF MODULE
© N. Ganesan, All rights
reserved.
MODULE
Ethernet Basic Characteristics
Module Objectives
• Topology• Cabling• Communication channels• A typical Ethernet frame• Access method and speed• IEEE 802 implementations
Topology
• Logical bus• Physical implementation
– Either Star or Bus– Each has its own advantage
Cabling
• Popular– Unshielded Twisted Pair (UTP)
(10baseT)• Different categories for different speeds
– Thin coaxial (10base2)• Others
– Thick coaxial (10Base5)– Shielded Twisted Pair (STP)– Optical Fiber (10baseFL)
Communication Channels
Network Cable
Single ChannelBaseband Technology
Ethernet Frame
A Typical Ethernet Frame Format
Preample
Receiver’s address
Sender’s address
Frame Type
CRC Trailer
Ethernet II Frame Format used for TCP/IP Communication
Frame Components
• Preamble– Start of frame indicator
• Destination address• Source address• Type
– Network layer protocol identifier• Trailer
– CRC Error checking code
Access Method and Speed
• IEEE 802.3– 10 Mbps
• IEEE 802.3u– 100 Mbps– Also known as fast Ethernet
• IEEE 802.3z– 1 Gbps– Also known as gigabit Ethernet
• IEEE 802.3ae– 10 Gbps
END OF MODULEEND OF MODULE
© N. Ganesan, All rights
reserved.
MODULE
Overview of Implementations
Module Objectives
• List 10 Mbps IEEE implementations• Discuss 100 Mbps implementations• Show typical star and bus
implementations
10 Mbps IEEE 802.3 Implementations
• 10BaseT– Twisted pair implementation
• 10Base2– Thin coaxial implementation
• 10Base5– Thick coaxial implementation
• 10BaseFL– Fiber implementation
100 Mbps IEEE 802 Implementations
• 100BaseTX– Twisted pair implementation
• 100BaseT4– Uses two pairs of regular Cat 3 wires to
transmit at 100M bps
• 100VG AnyLAN– Twisted pair implementation with variation
to the 100BaseTX implementation
• The network of choice at present is– Gigabit Ethernet that is gradually replacing
100BaseTx networks
A Typical Star Ethernet LAN Configuration
Client ServerClient
NIC NIC NICNIC
Hub
RJ 45 Connection
Twisted Pair Wire Cat 5e (1000baseT)
A Typical Bus Ethernet LAN Configuration
Client ServerClient
Thin coaxialcable (10base2)T-Connector
Terminator
NIC NIC NICNIC
END OF MODULEEND OF MODULE
© N. Ganesan, All rights
reserved.
MODULE
IEEE Implementation of 10BaseT Star Networks
Module Objectives
• 10BaseT implementation hardware• Implementation rules
– Length limitation and use of repeaters
• Implementation in a building• An actual 10BaseT configuration
10BaseT Implementation Hardware Requirements
• 10BaseT NIC• Hub
– May act as a multi-port repeater
• UTP or STP wiring– RJ 45 based
Actual Implementation Hardware
Hub
CablesNetworkCards
10BaseT Implementation Rules
• Maximum length of a 10BaseT segment– 100 meters (328 feet)
• Maximum number of computers supported in the LAN– 1024
Length Limitation
Client Server
Hub
< 328 feet< 328 feet
Use of Repeaters for Length Extension
Server
HubIf the distance is greater than 328 feet,a repeater can be used to extend the distance.
Repeater
Use of Fiber Line Drivers for Length Extension
Server
Switch If the distance is greater than 328 feet,a fiber-optic line driver can be used to extend the distanceto several km.
Fiber Driver
Fiber Driver
Implementation in a Building
HubPunch Down Client
Client
ServerWiring Rack(Wiring Closet)
Switch
Backbone
UTP
Installation in a Building
• Wiring closet is a reserved space in the building for housing wiring hubs
• Wiring rack• Hubs and switches• UTP cables are run to the wall• UTP connection is run from the wall
to the desktop using a patch cable
An Actual Star Ethernet LAN Configuration
END OF MODULEEND OF MODULE
© N. Ganesan, All rights
reserved.
MODULE
IEEE Implementation of 10Base2 Bus Networks
Module Objectives
• Briefly outline the hardware needed to implement a 10Base2 network
• Discuss the 10base2 implementation rules such as those relating to maximum segment length, minimum distance between nodes etc.
10Base2 Implementation: Hardware Requirements
• 10Base2 NIC• 10Base2 cable
– Thin coaxial cable
• BNC T connectors• BNC terminators• BNC barrel connectors, if necessary
– Usage must be kept to a minimum, if not avoided
Actual Implementation Hardware
A Simple 10Base2 Implementation
Maximum Segment Length
Minimum Cable Length
10Base2 Implementation Rules
• Maximum segment length – 185 meters (607 feet)
• Minimum cable length– 0.5 meters (20 inches)
• Maximum number of computers per segment– 30
Length Limitation
> 20 inches
< 607 feet
5-4-3 Segmentation Rule
• To build larger networks, segments can be combined together based on the 5-4-3 rule
• 5 Segments– A 10Base2 LAN can consists of 5 segments
• 4 Repeaters– 4 repeaters are used to form the 5 segments
• 3 segments with computers– 3 of the segments can have stations attached
A Sample 5-4-3 Implementation
Repeater
Repeater
Repeater
S1
S2
S3
S4
S5Repeater
Extension of the 10Base2 LAN
• A combined effect of the 4 repeaters is to extend the overall length of the network
• Maximum length– 3035 feet
Variations to the Rule
• In practice, variations to the rule exist for practicality
• Such implementations can therefore be considered as nonconforming with IEEE
• The implication – Interoperability with other conforming devices
is not guaranteed– The functional features are the responsibility
of the manufacturer of the nonconforming device
END OF MODULEEND OF MODULE
© N. Ganesan, All rights
reserved.
MODULE
Sample Implementations of 10base2
Module Objectives
• Implementing 10Base2 using switches
• Implementation in a building• Variations in 10Base2
configuration• 10Base2 and 10BaseT
internetworking
Implementing 10Base2 LANs Using Switches
Switch
S1 S2 S3
10Base2 Implementation in a Building
Router
S1S2 S3
Backbone
Variations in Ethernet Bus LAN Configuration
10Base2 and 10BaseT Internetworking
Client Server
Hub
Client Client Server
Transceiver
10Base2
10BaseT
AUI
END OF MODULEEND OF MODULE
© N. Ganesan, All rights
reserved.
MODULE
IEEE Implementation of 10Base5 Bus Networks
Module Objectives
• Give an overview of 10Base5 hardware• Discuss the implementation rules• Present a sample implementation for a
building• Include other relevant notes on
10Base5 implementation• Present an example of 10Base2 and
10Base5 integration
10Base5 Implementation Hardware Requirements
• 10Base5 NIC• Transceiver • 10Base5 cables• Transceiver cables
A Simple Implementation
Thick Coax (10Base5)Transceiver Transceiver
Client Server
Vampire Clamp
15-pin AUIConnector
10Base5 Implementation Rules
• Maximum segment length– 1,640 feet
• Minimum length between connections– 8 feet
• 5-4-3 rule holds for 10Base5 LAN as well– Maximum length in 5 segments
• 8,200 feet
Other Notes on 10Base5
• Transmission characteristics – Thicknet is better than Thinnet – Used as the Backbone
• Workability– Thinnet is better than Thicknet– Used for floor distribution
An Example of 10Base2 and 10Base5 Deployment
Building
Floor
10Base5Backbone
TransceiverRepeater
10Base2
END OF MODULEEND OF MODULE
© N. Ganesan, All rights
reserved.
MODULE
Fast (100 Mbps) Ethernet LANs
Module Objectives
• 100 Mbps Ethernet variations• 100BaseTX Characteristics• A simple 100BaseTX
implementation• Media variations in implementing
100BaseX
100 Mbps Ethernet Variations
• 100VG-AnyLAN– Introduced by HP– Standardized by IEEE 802.12 group
• 100BaseTX– Also known as Fast Ethernet
100BaseTX
• A very popular implementation at present
• Still based on CSMA/CD• Baseband technology• Implementation is similar to 10BaseT• Requires better UTP cable
– Category 5– Media variations are present
A Simple 100BaseTX Implementation
Client Server
Hub
Media Based Variations of 100BaseX
• 100BaseT4– 4-pair Category 3, 4 or 5 UTP
• 100BaseTX– 2-pair Category 5 UTP or STP
• 100BaseFL– 2-strand fiber-optic cable
END OF MODULEEND OF MODULE
© N. Ganesan, All rights
reserved.
MODULE
Network Operating Systems for Ethernet Networks
Module Objectives
• Microsoft operating systems– Peer-to-peer– Client-server
• Unix operating system and variations of the same
• Other operating systems
Microsoft
• Peer-to-Peer– Windows Workgroup 3.11– Windows 9x (95, 98 etc.)– Windows NT Workstation
• Client-Server– Windows NT Workstation for small LANs– Windows NT Server– Small Business Server
• A combination of NT Server, Exchange Server etc.
UNIX
• Many versions of Unix• Examples
– SCO Unix– Linux– AIX– etc.
Others
• Novel NetWare• Banyan Vines• AppleShare
– For apples on an Ethernet network
• etc.
END OF MODULE END OF MODULE
END OF CHAPTEREND OF CHAPTER