esprimo mobile d9500 - flash bios

SUPPORT INFORMATION - Flash - BIOS ESPRIMO Mobile D9500

SUPPORT INFORMATIONFile DescriptionFlash - BIOSESPRIMO Mobile D9500

Issue:Pages:

11.10.2012

BIOS DOS Flash (Disc-Image) - ESPRIMO D9500

Description: File: FTS_BIOS DOS Flash (Disc-Image) - ESPRIMO D9500_1.06_1023115.ZIP Version: 1.06 Date: 22.04.2008 Size: 0,9 MB Status: Manufacturer: Fujitsu Siemens Computers

Important information:

!! Connect the AC adapter before starting the BIOS flash !!!! Please reboot the system after the BIOS flash !!

Installation description:

Boots the system from the inserted Flash BIOS floppy disk and comply the info onthe System display.The new BIOS Update file will delete the former BIOS Version.

Comment:

******************************************* * * BIOS Flash-update for * * Fujitsu Siemens Computers * * ESPRIMO D 9500 * *******************************************

Connect AC adapter before flashing Please reboot your system after flashing

_______________________________________________________________________________

I. BIOS Flash update in DOS-mode: _______________________________________________________________________________

After running the D95001.06.exe the floppy disk should contain following files:

flash.bat

BIOS FLASH FILES

Readme.TXT (this file)

3

_____________________________________________________________________________________________________________________________ of 3 http://support.ts.fujitsu.com/

To flash your BIOS, boot to DOS-mode and run flash.bat from the floppy disk. _______________________________________________________________________________

II. BIOS Flash update from WINDOWS: _______________________________________________________________________________

Windowsflash is not available _______________________________________________________________________________

current BIOS V. 1.06:

Solved problems:

Windows related:- Shared VideoMemory Size was 64 MB. With BIOS 1.06 VRAM Size is 128 MB(XP).- Login Screen is visible on internal display, instead of the connectedexternal monitor / single monitor use (XP).- Brightness level is saved after resume from S3/S4/S5 (XP).

BIOS related:- Owner Information can be used now. The information is visible at theboot screen during the boot process.- Boot menu can be requested with F12, only if this option is enabled. Informer versions the Boot menu was always available after pressing F12.- If BIOS setup item ?Boot Menu? is disabled and user presses F12, thesystem always boots from PXE.- Default Value of ?Boot Menu? is enabled, instead of disabled in formerversions.- If the customer presses FN+F11 the fan will perform at the maximumspeed.- If EPP Parallel port setting is configured in BIOS, in Windows the sameconfiguration is visible. In former version ECP was shown.

Known errors, problems and restrictions:

- If an external monitor is connected (DVI) and configured as singlemonitor, the whole DOS and BIOS screen can?t be shown on it. DVI works only onOperating System properly.- Brightness level is saved after resume from S3/S4/S5, on VISTA OS,sometimes failed after S4/S5.- BIOS 1.06 doesn?t support Hardware Profile hotplug support. Customercan choose HW profile during system boot, but can?t change it dynamically.- If Windows VISTA SP1 is installed, it could be possible that Wake up onLAN from S3/S4 are not possible. (very sporadically)

Additional Information:

- none _______________________________________________________________________________


Solved problems:

- RIS installation failed, due to cardreader influence. Now cardreader can beenabled / disabled or auto disabled for one reboot in BIOS.- Brightness problems after powerstate changes are solved.

SUPPORT INFORMATION - ESPRIMO_Mobile_D9500 FileDesc_1023115_____________________________________________________________________________________________________________________________



- If customer downgrade the BIOS to a former version, it could be possible if hehad set a BIOS password before, that the system will request the BIOS passwordof the former version.- BIOS 1.05 doesn?t support Hardware Profile hotplug support. Customer canchoose HW profile during system boot, but can?t change it dynamically.- BIOS 1.05 doesn?t support dynamic VRAM allocation. Maximum VRAM allocation is32 MB.


- VGA BIOS update to 1566 _______________________________________________________________________________


Solved problems:

- BIOS 1.03 support Intel / PRO Wireless 3945 ABG


- none


- none _______________________________________________________________________________


Solved problems:

- none


- none


- This is an initial BIOS _______________________________________________________________________________

no information of older BIOS version available _______________________________________________________________________________

CONTACTFUJITSU LIMITEDMies-van-der-Rohe-Stra¥ 880807 MuenchenGermanyWebsite: http://www.fujitsu.com/fts/

All rights reserved, including intellectual property rights. Changes to technical data reserved. Delivery subject toavailability.Any liability that the data and illustrations are complete, actual or correct is excluded.Designations may be trademarks and/or copyrights of the respective manufacturer, the use of which by third partiesfor their own purposes may infringe the rights of such owner.For further information see http://www.fujitsu.com/fts/resources/navigation/terms-of-use.htmlCopyright © Fujitsu Technology Solutions 2012

SUPPORT INFORMATION - ESPRIMO_Mobile_D9500 FileDesc_1023115_____________________________________________________________________________________________________________________________


http://www.fujitsu.com/fts

http://www.fujitsu.com/fts

http://www.fujitsu.com/fts/resources/navigation/terms-of-use.html

esprimo mobile d9500 - flash bios

Documents