entrance handlesets - brass harrison and middleton …...• clearance between door & grip is...
TRANSCRIPT
Emtek Products, Inc. 15250 Stafford St. City of Industry, CA 91744 Tel: 800.356.2741 Fax: 800.577.5771 www.emtek.com
Standard Door Thickness: 13⁄4”Standard Components:• 1 3⁄8” Threaded Cylinder• 2” Long Spindle• 2” Top Rosette Screw• 1 1⁄2” Bottom Rosette Screw• Thumbpress• Strikeplate
Extended Door Thickness: 1 7/8”- 2 1⁄4”Extended Components:• 1 1⁄2” Threaded Cylinder• 2” Long Spindle• 2 1⁄2” Top Rosette Screw• 2” Bottom Rosette Screw• Thumbpress• Strikeplate
Extended Door Thickness: 2 3⁄8”- 2 3⁄4”Extended Components:• 1 3⁄4” Threaded Cylinder• 2 1⁄2” Long Spindle• 2 1⁄2” Top Rosette Screw• 2” Bottom Rosette Screw• Extended Thumbpress• Extended Strikeplate
Door Thickness Specifications
1
Harrison Trim StylePart # 3351
Middleton Trim StylePart # 3352
Additional Dimensions: (Part# 3351/3352)• Exterior Projection is 2 3⁄4”• Interior Projection Depends on Handle Style• Overall Grip thickness: 11⁄4” • Clearance between door & grip is 2”• Plates thickness: 1⁄2” Same dimensions for dummy function
Entrance Handlesets - Brass Harrison and Middleton Mortise
Standard interior trimPart # 3351/3352
10”10”
183⁄4”
21⁄8” 21⁄8” 35⁄16”
47⁄16”
211⁄16” 211⁄16” 211⁄16”
Emtek Products, Inc. 15250 Stafford St. City of Industry, CA 91744 Tel: 800.356.2741 Fax: 800.577.5771 www.emtek.com
Standard Door Thickness: 13⁄4”Standard Components:• 1 3⁄8” Threaded Cylinder• 2” Long Spindle• 2” Top Rosette Screw• 1 1⁄2” Bottom Rosette Screw• Thumbpress• Strikeplate
Extended Door Thickness: 1 7/8”- 2 1⁄4”Extended Components:• 1 1⁄2” Threaded Cylinder• 2” Long Spindle• 2 1⁄2” Top Rosette Screw• 2” Bottom Rosette Screw• Thumbpress• Strikeplate
Extended Door Thickness: 2 3⁄8”- 2 3⁄4”Extended Components:• 1 3⁄4” Threaded Cylinder• 2 1⁄4” Long Spindle• 2 1⁄2” Top Rosette Screw• 2” Bottom Rosette Screw• Extended Thumbpress• Extended Strikeplate
Door Thickness Specifications
2
Albany Trim StylePart # 3350
195⁄16”
21⁄8”
213⁄16”
93⁄4”
213⁄16”
35⁄16”
43⁄16”
Additional Dimensions: (Part# 3350)• Exterior Projection is 2 3⁄4”• Interior Projection Depends on Handle Style• Overall Grip thickness: 11⁄4” • Clearance between door & grip is 2”• Plates thickness: 1⁄2” Same dimensions for dummy function
Entrance Handlesets - Brass Albany Mortise
Emtek Products, Inc. 15250 Stafford St. City of Industry, CA 91744 Tel: 800.356.2741 Fax: 800.577.5771 www.emtek.com
Standard Door Thickness: 13⁄4”Standard Components:• 1 3⁄8” Threaded Cylinder• 2” Long Spindle• 2” Top Rosette Screw• 1 1⁄2” Bottom Rosette Screw• Thumbpress• Strikeplate
Extended Door Thickness: 1 7/8”- 2 1⁄4”Extended Components:• 1 1⁄2” Threaded Cylinder• 2” Long Spindle• 2 1⁄2” Top Rosette Screw• 2” Bottom Rosette Screw• Thumbpress• Strikeplate
Extended Door Thickness: 2 3⁄8”- 2 3⁄4”Extended Components:• 1 3⁄4” Threaded Cylinder• 2 1⁄4” Long Spindle• 2 1⁄2” Top Rosette Screw• 2” Bottom Rosette Screw• Extended Thumbpress• Extended Strikeplate
Door Thickness Specifications
3
Entrance Handlesets - Brass Mormont & Lugano Mortise
Mormont Trim StylePart # 3347
Lugano Trim StylePart # 3348
Additional Dimensions: (Part# 3347/3348)
• Exterior Projection is 2 1⁄2”• Interior Projection Depends on Handle Style• Overall Grip thickness: 1" • Clearance between door & grip is 1 1⁄2” - 1 7⁄8"• Plates thickness: 1⁄2"
Same dimensions for dummy function
10 1⁄4"10 1⁄4"
17 5⁄8" 18”
1 3⁄4"
2 1⁄2" 2 1⁄2"
2 1⁄2"
2"
39⁄16"
47⁄16"
Standard interior trimPart # 3347/3348
Emtek Products, Inc. 15250 Stafford St. City of Industry, CA 91744 Tel: 800.356.2741 Fax: 800.577.5771 www.emtek.com
Standard Door Thickness: 13⁄4”Standard Components:• 1 3⁄8” Threaded Cylinder• 2” Long Spindle• 2” Top Rosette Screw• 1 1⁄2” Bottom Rosette Screw• Thumbpress• Strikeplate
Extended Door Thickness: 1 7/8”- 2 1⁄4”Extended Components:• 1 1⁄2” Threaded Cylinder• 2” Long Spindle• 2 1⁄2” Top Rosette Screw• 2” Bottom Rosette Screw• Thumbpress• Strikeplate
Extended Door Thickness: 2 3⁄8”- 2 3⁄4”Extended Components:• 1 3⁄4” Threaded Cylinder• 2 1⁄4” Long Spindle• 2 1⁄2” Top Rosette Screw• 2” Bottom Rosette Screw• Extended Thumbpress• Extended Strikeplate
Door Thickness Specifications
4
Entrance Handlesets - Brass Zeus Mortise
Zeus Trim StylePart # 3346
Additional Dimensions: (Part# 3346)
• Exterior Projection is 2 1⁄2”• Interior Projection Depends on Handle Style• Overall Grip thickness: 1" • Clearance between door & grip is 1 1⁄2” - 1 7⁄8"• Plates thickness: 1⁄2"
Same dimensions for dummy function
10 1⁄4"10 1⁄4"
17 5⁄8"
2 9⁄16"
1 1⁄2"
2 7⁄8"
2 15⁄16"
3 3⁄4"
4 1⁄4"
2"
Emtek Products, Inc. 15250 Stafford St. City of Industry, CA 91744 Tel: 800.356.2741 Fax: 800.577.5771 www.emtek.com
Standard Door Thickness: 13⁄4”Standard Components:• 1 3⁄8” Threaded Cylinder• 2” Long Spindle• 2” Top Rosette Screw• 1 1⁄2” Bottom Rosette Screw• Thumbpress• Strikeplate
Extended Door Thickness: 1 7/8”- 2 1⁄4”Extended Components:• 1 1⁄2” Threaded Cylinder• 2” Long Spindle• 2 1⁄2” Top Rosette Screw• 2” Bottom Rosette Screw• Thumbpress• Strikeplate
Extended Door Thickness: 2 3⁄8”- 2 3⁄4”Extended Components:• 1 3⁄4” Threaded Cylinder• 2 1⁄4” Long Spindle• 2 1⁄2” Top Rosette Screw• 2” Bottom Rosette Screw• Extended Thumbpress• Extended Strikeplate
Door Thickness Specifications
5
Entrance Handlesets - Brass Hera Mortise
Hera Trim StylePart # 3345
Additional Dimensions: (Part# 3345)• Exterior Projection is 2 3⁄4”• Interior Projection Depends on Handle Style• Overall Grip thickness: 1" • Clearance between door & grip is 2 1⁄4”• Plates thickness: 1⁄2"
10 1⁄4"
2 1⁄2"
4 1⁄2"
3 3⁄8"
Same dimensions for dummy function
18 1⁄2"
2 1⁄2"
2 3⁄8"
Emtek Products, Inc. 15250 Stafford St. City of Industry, CA 91744 Tel: 800.356.2741 Fax: 800.577.5771 www.emtek.com
Standard Door Thickness: 13⁄4”Standard Components:• 1 3⁄8” Threaded Cylinder• 2” Long Spindle• 2” Top Rosette Screw• 1 1⁄2” Bottom Rosette Screw• Thumbpress• Strikeplate
Extended Door Thickness: 1 7/8”- 2 1⁄4”Extended Components:• 1 1⁄2” Threaded Cylinder• 2” Long Spindle• 2 1⁄2” Top Rosette Screw• 2” Bottom Rosette Screw• Thumbpress• Strikeplate
Extended Door Thickness: 2 3⁄8”- 2 3⁄4”Extended Components:• 1 3⁄4” Threaded Cylinder• 2 1⁄4” Long Spindle• 2 1⁄2” Top Rosette Screw• 2” Bottom Rosette Screw• Extended Thumbpress• Extended Strikeplate
Door Thickness Specifications
6
Entrance Handlesets - Brass Artemis Mortise
Artemis Trim StylePart # 3344
Additional Dimensions: (Part# 3344)• Exterior Projection is 2 3⁄4”• Interior Projection Depends on Handle Style• Overall Grip thickness: 1" • Clearance between door & grip is 2 1⁄4”• Plates thickness: 1⁄2"
17 7⁄8"
10 1⁄4"
10 1⁄4"
2 1⁄2"
2 1⁄2"
1 3⁄4"
2 3⁄8"
4 1⁄2"
3 3⁄8"
2 3⁄4"
Same dimensions for dummy function
Emtek Products, Inc. 15250 Stafford St. City of Industry, CA 91744 Tel: 800.356.2741 Fax: 800.577.5771 www.emtek.com
Standard Door Thickness: 13⁄4”Standard Components:• 1 3⁄8” Threaded Cylinder• 2” Long Spindle• 2” Top Rosette Screw• 1 1⁄2” Bottom Rosette Screw• Thumbpress• Strikeplate
Extended Door Thickness: 1 7/8”- 2 1⁄4”Extended Components:• 1 1⁄2” Threaded Cylinder• 2” Long Spindle• 2 1⁄2” Top Rosette Screw• 2” Bottom Rosette Screw• Thumbpress• Strikeplate
Extended Door Thickness: 2 3⁄8”- 2 3⁄4”Extended Components:• 1 3⁄4” Threaded Cylinder• 2 1⁄4” Long Spindle• 2 1⁄2” Top Rosette Screw• 2” Bottom Rosette Screw• Extended Thumbpress• Extended Strikeplate
Door Thickness Specifications
7
Entrance Handlesets - Brass Salem & Memphis Mortise
Same dimensions for dummy function
Salem Trim StylePart # 3301
19”
113⁄16”
19”
21⁄4”35⁄8”
21⁄2”
3”
41⁄2”
3”
113⁄16”
10”3”
3”
10”
3”33⁄4”
4”
Additional Dimensions: (Part # 3301 & 3302)• Exterior Projection is 2 3⁄4”• Interior Projection Depends on Handle Style• Overall Grip thickness: 1 1⁄4” • Clearance between door & grip is 2”• Plates thickness: 1⁄2”
Standard interior trimPart # 3301/3302*
113⁄16”
Memphis Trim StylePart # 3302
* Available in Lever By Lever/ Knob by Knob Mortise Entrance Handlesets. Same dimensions as interior trim of standard mortise entrance handlesets.
Emtek Products, Inc. 15250 Stafford St. City of Industry, CA 91744 Tel: 800.356.2741 Fax: 800.577.5771 www.emtek.com
Standard Door Thickness: 13⁄4”Standard Components:• 1 3⁄8” Threaded Cylinder• 2” Long Spindle• 2” Top Rosette Screw• 1 1⁄2” Bottom Rosette Screw• Thumbpress• Strikeplate
Extended Door Thickness: 1 7/8”- 2 1⁄4”Extended Components:• 1 1⁄2” Threaded Cylinder• 2” Long Spindle• 2 1⁄2” Top Rosette Screw• 2” Bottom Rosette Screw• Thumbpress• Strikeplate
Extended Door Thickness: 2 3⁄8”- 2 3⁄4”Extended Components:• 1 3⁄4” Threaded Cylinder• 2 1⁄4” Long Spindle• 2 1⁄2” Top Rosette Screw• 2” Bottom Rosette Screw• Extended Thumbpress• Extended Strikeplate
Door Thickness Specifications
8
* Available in Lever By Lever/ Knob by Knob Mortise Entrance Handlesets. Same dimensions as interior trim of standard mortise entrance handlesets.
Entrance Handlesets - Brass Jackson & Hamilton Mortise
Same dimensions for dummy function
Jackson Trim StylePart # 3303
Hamilton Trim StylePart #3304
17” 17”
23⁄8”
21⁄2”
23⁄4”
41⁄2”
35⁄8”
17⁄16”
93⁄4”
213⁄16”
17⁄16”
93⁄4”
39⁄16”213⁄16”
37⁄8”
Standard interior trimPart # 3303/3304*
Additional Dimensions: (Part # 3303 & 3304)• Exterior Projection is 2 7⁄8”• Interior Projection Depends on Handle Style• Overall Grip thickness: 1 1⁄4” • Clearance between door & grip is 1 1⁄2”• Plates thickness: 1⁄2”
113⁄16”
Emtek Products, Inc. 15250 Stafford St. City of Industry, CA 91744 Tel: 800.356.2741 Fax: 800.577.5771 www.emtek.com
Standard Door Thickness: 13⁄4”Standard Components:• 1 3⁄8” Threaded Cylinder• 2” Long Spindle• 2” Top Rosette Screw• 1 1⁄2” Bottom Rosette Screw• Thumbpress• Strikeplate
Extended Door Thickness: 1 7/8”- 2 1⁄4”Extended Components:• 1 1⁄2” Threaded Cylinder• 2” Long Spindle• 2 1⁄2” Top Rosette Screw• 2” Bottom Rosette Screw• Thumbpress• Strikeplate
Extended Door Thickness: 2 3⁄8”- 2 3⁄4”Extended Components:• 1 3⁄4” Threaded Cylinder• 2 1⁄4” Long Spindle• 2 1⁄2” Top Rosette Screw• 2” Bottom Rosette Screw• Extended Thumbpress• Extended Strikeplate
Door Thickness Specifications
9
Charleston Trim StylePart # 3343
19”
93⁄4”
21⁄8”
21⁄8”
213⁄16”
3”
93⁄4”
213⁄16”
35⁄16”
43⁄16”
Additional Dimensions: (Part# 3343)• Exterior Projection is 2 3⁄4”• Interior Projection Depends on Handle Style• Overall Grip thickness: 11⁄4” • Clearance between door & grip is 2”• Plates thickness: 1⁄2” Same dimensions for dummy function
Entrance Handlesets - Brass Charleston Mortise
Emtek Products, Inc. 15250 Stafford St. City of Industry, CA 91744 Tel: 800.356.2741 Fax: 800.577.5771 www.emtek.com
Standard Door Thickness: 13⁄4”Standard Components:• 1 3⁄8” Threaded Cylinder• 2” Long Spindle• 2” Top Rosette Screw• 1 1⁄2” Bottom Rosette Screw• Thumbpress• Strikeplate
Extended Door Thickness: 1 7/8”- 2 1⁄4”Extended Components:• 1 1⁄2” Threaded Cylinder• 2” Long Spindle• 2 1⁄2” Top Rosette Screw• 2” Bottom Rosette Screw• Thumbpress• Strikeplate
Extended Door Thickness: 2 3⁄8”- 2 3⁄4”Extended Components:• 1 3⁄4” Threaded Cylinder• 2 1⁄4” Long Spindle• 2 1⁄2” Top Rosette Screw• 2” Bottom Rosette Screw• Extended Thumbpress• Extended Strikeplate
Door Thickness Specifications
10
Oval Ribbon & Reed Mortise TrimPart #3342
17 5⁄8”
23⁄4”
35⁄16”
17⁄16”
41⁄8”
35⁄16”
Additional Dimensions: ( Part # 3342 )• Exterior Projection is 23⁄4”• Interior Projection Depends on Handle Style• Overall Grip thickness: 13⁄8” • Clearance between door & grip is 19⁄16”• Plates thickness: 1⁄2”
Standard interior trimPart #3342*
3 15⁄16”
Entrance Handlesets - Brass Oval Ribbon & Reed Mortise
Same dimensions for dummy function
* Available in Lever By Lever/ Knob by Knob Mortise Entrance Handlesets. Same dimensions as interior trim of standard mortise entrance handlesets.
10 5⁄16”10 5⁄16”
Emtek Products, Inc. 15250 Stafford St. City of Industry, CA 91744 Tel: 800.356.2741 Fax: 800.577.5771 www.emtek.com
Standard Door Thickness: 13⁄4”Standard Components:• 1 3⁄8” Threaded Cylinder• 2” Long Spindle• 2” Top Rosette Screw• 1 1⁄2” Bottom Rosette Screw• Thumbpress• Strikeplate
Extended Door Thickness: 1 7/8”- 2 1⁄4”Extended Components:• 1 1⁄2” Threaded Cylinder• 2” Long Spindle• 2 1⁄2” Top Rosette Screw• 2” Bottom Rosette Screw• Thumbpress• Strikeplate
Extended Door Thickness: 2 3⁄8”- 2 3⁄4”Extended Components:• 1 3⁄4” Threaded Cylinder• 2 1⁄4” Long Spindle• 2 1⁄2” Top Rosette Screw• 2” Bottom Rosette Screw• Extended Thumbpress• Extended Strikeplate
Door Thickness Specifications
11
Mills TrimPart #3310
171⁄4”
11⁄2”
21⁄2”
3”
23⁄4”
43⁄4”
21⁄4”
10”
23⁄4”
39⁄16”
33⁄4”
Additional Dimensions: ( Part # 3310 )• Exterior Projection is 25⁄8”• Interior Projection Depends on Handle Style• Overall Grip thickness: 1” • Clearance between door & grip is 13⁄8”• Plates thickness: 1⁄2”
Standard interior trimPart #3310*
21⁄4”
Same dimensions for dummy function
Entrance Handlesets - Brass Mills Mortise
* Available in Lever By Lever/ Knob by Knob Mortise Entrance Handlesets. Same dimensions as interior trim of standard mortise entrance handlesets.
Emtek Products, Inc. 15250 Stafford St. City of Industry, CA 91744 Tel: 800.356.2741 Fax: 800.577.5771 www.emtek.com
Standard Door Thickness: 13⁄4”Standard Components:• 1 3⁄8” Threaded Cylinder• 2” Long Spindle• 2” Top Rosette Screw• 1 1⁄2” Bottom Rosette Screw• Thumbpress• Strikeplate
Extended Door Thickness: 1 7/8”- 2 1⁄4”Extended Components:• 1 1⁄2” Threaded Cylinder• 2” Long Spindle• 2 1⁄2” Top Rosette Screw• 2” Bottom Rosette Screw• Thumbpress• Strikeplate
Extended Door Thickness: 2 3⁄8”- 2 3⁄4”Extended Components:• 1 3⁄4” Threaded Cylinder• 2 1⁄4” Long Spindle• 2 1⁄2” Top Rosette Screw• 2” Bottom Rosette Screw• Extended Thumbpress• Extended Strikeplate
Door Thickness Specifications
12
Same dimensions for dummy function
Entrance Handlesets - Brass Manhattan & Melrose Mortise
Melrose Mortise Trim StylePart # 3305
171⁄4”
10”
23⁄4”
21⁄4”
25⁄8”
Additional Dimensions: ( Part # 3306 & 3305 )• Exterior Projection is 25⁄8”• Interior Projection Depends on Handle Style• Overall Grip thickness: 1” • Clearance between door & grip is 13⁄8”• Plates thickness: 1⁄2”
23⁄8”
181⁄2”
3”
10”
23⁄4”
39⁄16”
33⁄4”
Standard interior trimPart # 3306/3305*
Manhattan Trim StylePart # 3306
21⁄4”
* Available in Lever By Lever/ Knob by Knob Mortise Entrance Handlesets. Same dimensions as interior trim of standard mortise entrance handlesets.
Emtek Products, Inc. 15250 Stafford St. City of Industry, CA 91744 Tel: 800.356.2741 Fax: 800.577.5771 www.emtek.com
Standard Door Thickness: 13⁄4”Standard Components:• 1 3⁄8” Threaded Cylinder• 2” Long Spindle• 2” Top Rosette Screw• 1 1⁄2” Bottom Rosette Screw• Thumbpress• Strikeplate
Extended Door Thickness: 1 7/8”- 2 1⁄4”Extended Components:• 1 1⁄2” Threaded Cylinder• 2” Long Spindle• 2 1⁄2” Top Rosette Screw• 2” Bottom Rosette Screw• Thumbpress• Strikeplate
Extended Door Thickness: 2 3⁄8”- 2 3⁄4”Extended Components:• 1 3⁄4” Threaded Cylinder• 2 1⁄4” Long Spindle• 2 1⁄2” Top Rosette Screw• 2” Bottom Rosette Screw• Extended Thumbpress• Extended Strikeplate
Door Thickness Specifications
13
Regency Trim StylePart # 3307
Versailles Trim StylePart # 3309
175⁄8”
123⁄16”
3”
31⁄8”
17⁄16”
123⁄16”
47⁄8”
51⁄16”
3”
201⁄2”
31⁄8”
3”
Additional Dimensions: ( Part # 3307 & 3309 )• Exterior Projection is 23⁄4”• Interior Projection Depends on Handle Style• Overall Grip thickness: 13⁄8” • Clearance between door & grip is 19⁄16”• Plates thickness: 1⁄2”
Standard interior trimPart # 3307/3309*
Same dimensions for dummy function
Entrance Handlesets - Brass Regency & Versailles Mortise
* Available in Lever By Lever/ Knob by Knob Mortise Entrance Handlesets. Same dimensions as interior trim of standard mortise entrance handlesets.
Emtek Products, Inc. 15250 Stafford St. City of Industry, CA 91744 Tel: 800.356.2741 Fax: 800.577.5771 www.emtek.com
Standard Door Thickness: 13⁄4”Standard Components:• 1 3⁄8” Threaded Cylinder• 2” Long Spindle• 2” Top Rosette Screw• 1 1⁄2” Bottom Rosette Screw• Thumbpress• Strikeplate
Extended Door Thickness: 1 7/8”- 2 1⁄4”Extended Components:• 1 1⁄2” Threaded Cylinder• 2” Long Spindle• 2 1⁄2” Top Rosette Screw• 2” Bottom Rosette Screw• Thumbpress• Strikeplate
Extended Door Thickness: 2 3⁄8”- 2 3⁄4”Extended Components:• 1 3⁄4” Threaded Cylinder• 2 1⁄4” Long Spindle• 2 1⁄2” Top Rosette Screw• 2” Bottom Rosette Screw• Extended Thumbpress• Extended Strikeplate
Door Thickness Specifications
14
Same dimensions for dummy function
Entrance Handlesets - Brass Craftsman Mortise
18”
11”
11”
47⁄16”
49⁄16”
3”
Additional Dimensions: ( Part # 3308 )• Exterior Projection is 25⁄8”• Interior Projection Depends on Handle Style• Overall Grip thickness: 11⁄8”• Clearance between door & grip is 13⁄8”• Plates thickness: 1⁄2”
Standard Interior TrimPart # 3308*
Craftman Trim StylePart # 3308
* Available in Lever By Lever/ Knob by Knob Mortise Entrance Handlesets. Same dimensions as interior trim of standard mortise entrance handlesets.
3”
3”
Emtek Products, Inc. 15250 Stafford St. City of Industry, CA 91744 Tel: 800.356.2741 Fax: 800.577.5771 www.emtek.com
Standard Door Thickness: 13⁄4”Standard Components:• 1 3⁄8” Threaded Cylinder• 2” Long Spindle• 2” Top Rosette Screw• 1 1⁄2” Bottom Rosette Screw• Thumbpress• Strikeplate
Extended Door Thickness: 1 7/8”- 2 1⁄4”Extended Components:• 1 1⁄2” Threaded Cylinder• 2” Long Spindle• 2 1⁄2” Top Rosette Screw• 2” Bottom Rosette Screw• Thumbpress• Strikeplate
Extended Door Thickness: 2 3⁄8”- 2 3⁄4”Extended Components:• 1 3⁄4” Threaded Cylinder• 2 1⁄4” Long Spindle• 2 1⁄2” Top Rosette Screw• 2” Bottom Rosette Screw• Extended Thumbpress• Extended Strikeplate
Door Thickness Specifications
15
Same dimensions for dummy function
Entrance Handlesets - Brass Craftsman Full Length Mortise
Craftsman Full Length Trim StylePart # 3349
Additional Dimensions: ( Part # 3349 )• Exterior Projection is 25⁄8”• Interior Projection Depends on Handle Style• Overall Grip thickness: 11⁄8”• Clearance between door & grip is 13⁄8”• Plates thickness: 1⁄2”
Standard Interior TrimPart # 3349*
* Available in Lever By Lever/ Knob by Knob Mortise Entrance Handlesets. Same dimensions as interior trim of standard mortise entrance handlesets.
19”
11”
47⁄16”
49⁄16”
3”3”
3”
Emtek Products, Inc. 15250 Stafford St. City of Industry, CA 91744 Tel: 800.356.2741 Fax: 800.577.5771 www.emtek.com
Standard Door Thickness: 13⁄4”Standard Components:• 1 3⁄8” Threaded Cylinder• 2” Long Spindle• 2” Top Rosette Screw• 1 1⁄2” Bottom Rosette Screw• Thumbpress• Strikeplate
Extended Door Thickness: 1 7/8”- 2 1⁄4”Extended Components:• 1 1⁄2” Threaded Cylinder• 2” Long Spindle• 2 1⁄2” Top Rosette Screw• 2” Bottom Rosette Screw• Thumbpress• Strikeplate
Extended Door Thickness: 2 3⁄8”- 2 3⁄4”Extended Components:• 1 3⁄4” Threaded Cylinder• 2 1⁄4” Long Spindle• 2 1⁄2” Top Rosette Screw• 2” Bottom Rosette Screw• Extended Thumbpress• Extended Strikeplate
Door Thickness Specifications
16
Valley Forge Mortise Trim StylePart # 3341
18”
111⁄4”111⁄4”
25⁄8”
213⁄16”
17⁄16”
213⁄16”
31⁄2”
53⁄8”
Additional Dimensions: ( Part # 3341 )• Exterior Projection is 3”• Interior Projection Depends on Handle Style• Overall Grip thickness: 17⁄16”• Clearance between door & grip is 11⁄4”• Plates thickness: 1⁄2”
Standard interior trimPart # 3341*
Same dimensions for dummy function
Entrance Handlesets - Brass Valley Forge Mortise
* Available in Lever By Lever/ Knob by Knob Mortise Entrance Handlesets. Same dimensions as interior trim of standard mortise entrance handlesets.
17
Emtek Products, Inc. 15250 Stafford St. City of Industry, CA 91744 Tel: 800.356.2741 Fax: 800.577.5771 www.emtek.com
Standard Door Thickness: 13⁄4”Standard Components:• 1 3⁄8” Threaded Cylinder• 2” Long Spindle• 2” Top Rosette Screw• 1 1⁄2” Bottom Rosette Screw• Thumbpress• Strikeplate
Extended Door Thickness: 1 7⁄8”- 2 1⁄4”Extended Components:• 1 1⁄2” Threaded Cylinder• 2” Long Spindle• 2 1⁄2” Top Rosette Screw• 2” Bottom Rosette Screw• Thumbpress• Strikeplate
Extended Door Thickness: 2 3⁄8”- 2 5⁄8”Extended Components:• 1 3⁄4” Threaded Cylinder• 2 1⁄4” Long Spindle• 2 1⁄2” Top Rosette Screw• 2” Bottom Rosette Screw• Extended Thumbpress• Extended Strikeplate• 2 3/4” TD Requires 2” Threaded Cylinder
Door Thickness Specifications
Sonoma Entryset Part # 3329
21⁄4”
10”
213⁄16”
23⁄16”
23⁄4”
Longmont EntrysetPart # 3330
213⁄16”
10”
213⁄16”
37⁄16”
45⁄16”
Order any Sandcast Bronze knob or lever for the inside trim.
Additional Dimensions: (Part # 3329 & 3330)• Exterior Projection is 31⁄8”• Interior Projection Depends on Handle Style• Overall Grip thickness: 13⁄4”• Clearance between door & grip is 13⁄4”• Plates thickness: 1⁄2”
Standard with Mortise Locks• 2 ½” or 2 ¾” backsets• Standard Mortise Door Prep ANSI A115.1• Schlage C Keyway
Entrance Handlesets - Sandcast Bronze Sonoma & Longmont Mortise
171⁄2” 19”
Same dimensions for dummy function
21⁄4”
18
Emtek Products, Inc. 15250 Stafford St. City of Industry, CA 91744 Tel: 800.356.2741 Fax: 800.577.5771 www.emtek.com
Standard Door Thickness: 13⁄4”Standard Components:• 1 3⁄8” Threaded Cylinder• 2” Long Spindle• 2” Top Rosette Screw• 1 1⁄2” Bottom Rosette Screw• Thumbpress• Strikeplate
Extended Door Thickness: 1 7⁄8”- 2 1⁄4”Extended Components:• 1 1⁄2” Threaded Cylinder• 2” Long Spindle• 2 1⁄2” Top Rosette Screw• 2” Bottom Rosette Screw• Thumbpress• Strikeplate
Extended Door Thickness: 2 3⁄8”- 2 5⁄8”Extended Components:• 1 3⁄4” Threaded Cylinder• 2 1⁄4” Long Spindle• 2 1⁄2” Top Rosette Screw• 2” Bottom Rosette Screw• Extended Thumbpress• Extended Strikeplate• 2 3/4” TD Requires 2” Threaded Cylinder
Door Thickness Specifications
Morgan Entryset Part # 3327
21⁄4”
10”
213⁄16”
3”
23⁄16”
Rockford EntrysetPart # 3328
213⁄16”
21⁄4”
10”
213⁄16”
37⁄16”
45⁄16”
Standard interior trimPart # 3327/3328
Additional Dimensions: (Part # 3327 & 3328)• Exterior Projection is 31⁄8”• Interior Projection Depends on Handle Style• Overall Grip thickness: 13⁄4”• Clearance between door & grip is 13⁄4”• Plates thickness: 1⁄2”
Entrance Handlesets - Sandcast Bronze Morgan & Rockford Mortise
161⁄4” 19”
Same dimensions for dummy function
19
Emtek Products, Inc. 15250 Stafford St. City of Industry, CA 91744 Tel: 800.356.2741 Fax: 800.577.5771 www.emtek.com
Standard Door Thickness: 13⁄4”Standard Components:• 1 3⁄8” Threaded Cylinder• 2” Long Spindle• 2” Top Rosette Screw• 1 1⁄2” Bottom Rosette Screw• Thumbpress• Strikeplate
Extended Door Thickness: 1 7⁄8”- 2 1⁄4”Extended Components:• 1 1⁄2” Threaded Cylinder• 2” Long Spindle• 2 1⁄2” Top Rosette Screw• 2” Bottom Rosette Screw• Thumbpress• Strikeplate
Extended Door Thickness: 2 3⁄8”- 2 5⁄8”Extended Components:• 1 3⁄4” Threaded Cylinder• 2 1⁄4” Long Spindle• 2 1⁄2” Top Rosette Screw• 2” Bottom Rosette Screw• Extended Thumbpress• Extended Strikeplate• 2 3/4” TD Requires 2” Threaded Cylinder
Door Thickness Specifications
Denver Mortise Entryset Part # 3323
13⁄4”
27⁄16”
31⁄2”
41⁄2”
23⁄4”
3”
21⁄8”
91⁄2”
213⁄16”
31⁄2”
35⁄8”
Additional Dimensions: (Part # 3323)• Exterior Projection is 3”• Interior Projection Depends on Handle Style• Overall Grip thickness: 1”• Clearance between door & grip is 11⁄2”• Plates thickness: 1⁄2”
Standard interior trimPart # 3323*
161⁄4”
Entrance Handlesets - Bronze Denver Mortise
Same dimensions for dummy function
* Available in Lever By Lever/ Knob by Knob Mortise Entrance Handlesets. Same dimensions as interior trim of standard mortise entrance handlesets.
20
Emtek Products, Inc. 15250 Stafford St. City of Industry, CA 91744 Tel: 800.356.2741 Fax: 800.577.5771 www.emtek.com
Standard Door Thickness: 13⁄4”Standard Components:• 1 3⁄8” Threaded Cylinder• 2” Long Spindle• 2” Top Rosette Screw• 1 1⁄2” Bottom Rosette Screw• Thumbpress• Strikeplate
Extended Door Thickness: 1 7⁄8”- 2 1⁄4”Extended Components:• 1 1⁄2” Threaded Cylinder• 2” Long Spindle• 2 1⁄2” Top Rosette Screw• 2” Bottom Rosette Screw• Thumbpress• Strikeplate
Extended Door Thickness: 2 3⁄8”- 2 5⁄8”Extended Components:• 1 3⁄4” Threaded Cylinder• 2 1⁄4” Long Spindle• 2 1⁄2” Top Rosette Screw• 2” Bottom Rosette Screw• Extended Thumbpress• Extended Strikeplate• 2 3/4” TD Requires 2” Threaded Cylinder
Door Thickness Specifications
Topeka Entryset Part # 3322
Cheyenne EntrysetPart # 3321
23⁄4”
161⁄4”
91⁄2”
21⁄8”
23⁄4”
3”
195⁄16”
3”
Additional Dimensions: (Part # 3321& 3322)• Exterior Projection is 31⁄8”• Interior Projection Depends on Handle Style• Overall Grip thickness: 13⁄4”• Clearance between door & grip is 13⁄4”• Plates thickness: 1⁄2”
21⁄8”
91⁄2”
213⁄16”
31⁄2”
35⁄8”
Standard interior trimPart # 3321/3322*
Entrance Handlesets - Bronze Cheyenne & Topeka Mortise
Same dimensions for dummy function
* Available in Lever By Lever/ Knob by Knob Mortise Entrance Handlesets. Same dimensions as interior trim of standard mortise entrance handlesets.
21
Emtek Products, Inc. 15250 Stafford St. City of Industry, CA 91744 Tel: 800.356.2741 Fax: 800.577.5771 www.emtek.com
Standard Door Thickness: 13⁄4”Standard Components:• 1 3⁄8” Threaded Cylinder• 2” Long Spindle• 2” Top Rosette Screw• 1 1⁄2” Bottom Rosette Screw• Thumbpress• Strikeplate
Extended Door Thickness: 1 7⁄8”- 2 1⁄4”Extended Components:• 1 1⁄2” Threaded Cylinder• 2” Long Spindle• 2 1⁄2” Top Rosette Screw• 2” Bottom Rosette Screw• Thumbpress• Strikeplate
Extended Door Thickness: 2 3⁄8”- 2 5⁄8”Extended Components:• 1 3⁄4” Threaded Cylinder• 2 1⁄4” Long Spindle• 2 1⁄2” Top Rosette Screw• 2” Bottom Rosette Screw• Extended Thumbpress• Extended Strikeplate• 2 3/4” TD Requires 2” Threaded Cylinder
Door Thickness Specifications
Rectangular Monolithic MortisePart # 3325
Rectangular Sectional MortisePart # 3324
161⁄4”
11⁄2”
23⁄8” 3”
2 13⁄16”
43⁄4”
3”
2 3⁄16”
161⁄4”
10”213⁄16”
21⁄4”
3”
21⁄8”
10”
213⁄16”
37⁄16”
45⁄16”
Additional Dimensions: (Part # 3324, 3325)• Exterior Projection is 31⁄8”• Interior Projection Depends on Handle Style• Overall Grip thickness: 13⁄4”• Clearance between door & grip is 13⁄4”• Plates thickness: 1⁄2”
Standard interior trimPart # 3324/3325*
* Available in Lever By Lever/ Knob by Knob Mortise Entrance Handlesets. Same dimensions as interior trim of standard mortise entrance handlesets.
Entrance Handlesets - Bronze Rectangular Sectional & Monolithic Mortise
Same dimensions for dummy function
22
Emtek Products, Inc. 15250 Stafford St. City of Industry, CA 91744 Tel: 800.356.2741 Fax: 800.577.5771 www.emtek.com
Standard Door Thickness: 13⁄4”Standard Components:• 1 3⁄8” Threaded Cylinder• 2” Long Spindle• 2” Top Rosette Screw• 1 1⁄2” Bottom Rosette Screw• Thumbpress• Strikeplate
Extended Door Thickness: 1 7⁄8”- 2 1⁄4”Extended Components:• 1 1⁄2” Threaded Cylinder• 2” Long Spindle• 2 1⁄2” Top Rosette Screw• 2” Bottom Rosette Screw• Thumbpress• Strikeplate
Extended Door Thickness: 2 3⁄8”- 2 5⁄8”Extended Components:• 1 3⁄4” Threaded Cylinder• 2 1⁄4” Long Spindle• 2 1⁄2” Top Rosette Screw• 2” Bottom Rosette Screw• Extended Thumbpress• Extended Strikeplate• 2 3/4” TD Requires 2” Threaded Cylinder
Door Thickness Specifications
Rectangular Full Length MortisePart # 3326
10”
213⁄16”
37⁄16”
45⁄16”
213⁄16”
21⁄4”
19”
Additional Dimensions: (Part # 3326)• Exterior Projection is 31⁄8”• Interior Projection Depends on Handle Style• Overall Grip thickness: 13⁄4”• Clearance between door & grip is 13⁄4”• Plates thickness: 1⁄2”
Standard interior trimPart # 3326*
* Available in Lever By Lever/ Knob by Knob Mortise Entrance Handlesets. Same dimensions as interior trim of standard mortise entrance handlesets.
Entrance Handlesets - Bronze Rectangular Full Length Mortise
Same dimensions for dummy function
23
Emtek Products, Inc. 15250 Stafford St. City of Industry, CA 91744 Tel: 800.356.2741 Fax: 800.577.5771 www.emtek.com
Standard Door Thickness: 13⁄4”Standard Components:• 1 3⁄8” Threaded Cylinder• 2” Long Spindle• 2” Top Rosette Screw• 1 1⁄2” Bottom Rosette Screw• Thumbpress• Strikeplate
Extended Door Thickness: 1 7⁄8”- 2 1⁄4”Extended Components:• 1 1⁄2” Threaded Cylinder• 2” Long Spindle• 2 1⁄2” Top Rosette Screw• 2” Bottom Rosette Screw• Thumbpress• Strikeplate
Extended Door Thickness: 2 3⁄8”- 2 5⁄8”Extended Components:• 1 3⁄4” Threaded Cylinder• 2 1⁄4” Long Spindle• 2 1⁄2” Top Rosette Screw• 2” Bottom Rosette Screw• Extended Thumbpress• Extended Strikeplate• 2 3/4” TD Requires 2” Threaded Cylinder
Door Thickness Specifications
Entrance Handlesets - Tuscany Naple & Da Vinci Mortise
Same dimensions for dummy function
Da Vinci EntrysetPart # 3331
Naples Mortise EntrysetPart # 3334
181⁄2”
21⁄2”
113⁄16”
3”
41⁄2”
35⁄8”
3”
113⁄16”
181⁄2”
10”3”
21⁄4”
3”
113⁄16”
10”
37⁄16”
47⁄16”
3”
Additional Dimensions: (Part # 3334, 3331)• Exterior Projection is 39⁄32”• Interior Projection Depends on Handle Style• Overall Grip thickness: 19⁄16”• Clearance between door & grip is 17⁄8”• Plates thickness: 11⁄16”
Standard interior trimPart # 3331/3334*
* Available in Lever By Lever/ Knob by Knob Mortise Entrance Handlesets. Same dimensions as interior trim of standard mortise entrance handlesets.
24
Emtek Products, Inc. 15250 Stafford St. City of Industry, CA 91744 Tel: 800.356.2741 Fax: 800.577.5771 www.emtek.com
Standard Door Thickness: 13⁄4”Standard Components:• 1 3⁄8” Threaded Cylinder• 2” Long Spindle• 2” Top Rosette Screw• 1 1⁄2” Bottom Rosette Screw• Thumbpress• Strikeplate
Extended Door Thickness: 1 7⁄8”- 2 1⁄4”Extended Components:• 1 1⁄2” Threaded Cylinder• 2” Long Spindle• 2 1⁄2” Top Rosette Screw• 2” Bottom Rosette Screw• Thumbpress• Strikeplate
Extended Door Thickness: 2 3⁄8”- 2 5⁄8”Extended Components:• 1 3⁄4” Threaded Cylinder• 2 1⁄4” Long Spindle• 2 1⁄2” Top Rosette Screw• 2” Bottom Rosette Screw• Extended Thumbpress• Extended Strikeplate• 2 3/4” TD Requires 2” Threaded Cylinder
Door Thickness Specifications
Entrance Handlesets - Tuscany Octagon & Art Nouveau Mortise
Same dimensions for dummy function
* Available in Lever By Lever/ Knob by Knob Mortise Entrance Handlesets. Same dimensions as interior trim of standard mortise entrance handlesets.
Octagon Mortise EntrysetPart # 3333
171⁄2”
101⁄2”
3”
211⁄16”
11⁄2”
37⁄8”
43⁄8”
3”
Standard interior trimPart # 3333*
18”
11”
27⁄8”
3”
2”
21⁄2”
11”
3”
35⁄8”
37⁄8”
Standard interior trimPart # 3332*
Art Nouveau Mortise EntrysetLeft Hand Grip
Part # 3332
10”
Additional Dimensions: (Part # 3333 & 3332)• Exterior Projection is 31⁄16”• Interior Projection Depends on Handle Style• Overall Grip thickness: 21⁄8”• Clearance between door & grip is 19⁄16”• Plates thickness: 1⁄2”
25
Emtek Products, Inc. 15250 Stafford St. City of Industry, CA 91744 Tel: 800.356.2741 Fax: 800.577.5771 www.emtek.com
Standard Door Thickness: 13⁄4”Standard Components:• 1 3⁄8” Threaded Cylinder• 2” Long Spindle• 2” Top Rosette Screw• 1 1⁄2” Bottom Rosette Screw• Thumbpress• Strikeplate
Extended Door Thickness: 1 7⁄8”- 2 1⁄4”Extended Components:• 1 1⁄2” Threaded Cylinder• 2” Long Spindle• 2 1⁄2” Top Rosette Screw• 2” Bottom Rosette Screw• Thumbpress• Strikeplate
Extended Door Thickness: 2 3⁄8”- 2 5⁄8”Extended Components:• 1 3⁄4” Threaded Cylinder• 2 1⁄4” Long Spindle• 2 1⁄2” Top Rosette Screw• 2” Bottom Rosette Screw• Extended Thumbpress• Extended Strikeplate• 2 3/4” TD Requires 2” Threaded Cylinder
Door Thickness Specifications
Entrance Handlesets - Wrought Steel Sectional Mortise
Same dimensions for dummy function
Same dimensions for dummy functionSame dimensions for dummy function
* Available in Lever By Lever/ Knob by Knob Mortise Entrance Handlesets. Same dimensions as interior trim of standard mortise entrance handlesets.
Lafayette GripPart # 3314
35⁄8”
25⁄16”
33⁄4”
Additional Dimensions: (Part # 3315)• Exterior Projection is 31⁄2”• Interior Projection Depends on Handle Style• Overall Grip thickness: 3⁄4”• Clearance between door & grip is 2”• Plates thickness: 1⁄2”
Standard interior trimPart # 3314/3315/3316*
San Carlos GripPart # 3315
95⁄8”
13⁄4”
Normandy GripPart # 3316
Additional Dimensions: (Part # 3314)• Exterior Projection is 31⁄8”• Interior Projection Depends on Handle Style• Overall Grip thickness: 11⁄2”• Clearance between door & grip is 11⁄4”• Plates thickness: 1⁄2”
Additional Dimensions: (Part # 3316)• Exterior Projection is 3”• Interior Projection Depends on Handle Style• Overall Grip thickness: 1”• Clearance between door & grip is 15⁄8”• Plates thickness: 1⁄2”
17”
13⁄4” 31⁄2”
21⁄2”
29⁄16”43⁄8”
13⁄4”
21⁄8”
3”
26
Emtek Products, Inc. 15250 Stafford St. City of Industry, CA 91744 Tel: 800.356.2741 Fax: 800.577.5771 www.emtek.com
Standard Door Thickness: 13⁄4”Standard Components:• 1 3⁄8” Threaded Cylinder• 2” Long Spindle• 2” Top Rosette Screw• 1 1⁄2” Bottom Rosette Screw• Thumbpress• Strikeplate
Extended Door Thickness: 1 7⁄8”- 2 1⁄4”Extended Components:• 1 1⁄2” Threaded Cylinder• 2” Long Spindle• 2 1⁄2” Top Rosette Screw• 2” Bottom Rosette Screw• Thumbpress• Strikeplate
Extended Door Thickness: 2 3⁄8”- 2 5⁄8”Extended Components:• 1 3⁄4” Threaded Cylinder• 2 1⁄4” Long Spindle• 2 1⁄2” Top Rosette Screw• 2” Bottom Rosette Screw• Extended Thumbpress• Extended Strikeplate• 2 3/4” TD Requires 2” Threaded Cylinder
Door Thickness Specifications
Entrance Handlesets - Wrought Steel Monolithic Mortise
Same dimensions for dummy function
Same dimensions for dummy function
Same dimensions for dummy function
* Available in Lever By Lever/ Knob by Knob Mortise Entrance Handlesets. Same dimensions as interior trim of standard mortise entrance handlesets.
17”
21⁄16”
25⁄16”
13⁄4”
95⁄8”
25⁄16”
35⁄8”
33⁄4”
13⁄4”
Standard interior trimPart # 3311, 3312, 3313*
Lafayette GripPart # 3311
Normandy GripPart # 3313
95⁄8”
San Carlos GripPart # 3312
Additional Dimensions: (Part # 3311)• Exterior Projection is 31⁄8”• Interior Projection Depends on Handle Style• Overall Grip thickness: 11⁄2”• Clearance between door & grip is 11⁄4”• Plates thickness: 1⁄2”
Additional Dimensions: (Part # 3313)• Exterior Projection is 3”• Interior Projection Depends on Handle Style• Overall Grip thickness: 1”• Clearance between door & grip is 15⁄8”• Plates thickness: 1⁄2”
Additional Dimensions: (Part # 3312)• Exterior Projection is 31⁄2”• Interior Projection Depends on Handle Style• Overall Grip thickness: 3⁄4”• Clearance between door & grip is 2”• Plates thickness: 1⁄2”
21⁄8”
3”