energy & technology corp. technical...

ENERGY & TECHNOLOGY Corp.

TECHNICAL INDUSTRIES, Inc.

ENERGY PIPE, LLC.

.

ENERGY TECHNOLOGY THREADING, LLC.

1 • ENERGY & TECHNOLOGY CORP.

OUR PRODUCTS

IN GOD WE TRUST

ENERGY & TECHNOLOGY CORP.

Energy & Technology Corp.

Rigs & Equipments

ZJ70/4500LDB Drilling Rig is suitable for 7000m (23000ft)

well with 114mm (4.5in) drill pipe, in which the rotary tableis driven by AC frequency conversion independence. The

draw works and mud pumps are driven by mechanical.

Specifications of Drilling Rigs:

Model ZJ130/1700L ZJ40/2250L ZJ50/3150L ZJ70/4500L

Nominal Drilling Depth(114mm pipe) 5250-9850 ft 8200-13200 ft 11500-16500 ft 14800-23000 ft

Max hook load kN 1700 2250 3150 4500

Number of lines of Hoisting System 10 10 12 12

Dia. of Wire Line mm(in) 29(11/8) 32(11/4) 35(13/8) 38(11/2)

Max. Pull of Fast Line kN 210 280 340 485

Model of Drawworks JC30L JC40L JC40LDB JC50L JC50LDB JC70L JCLDB

Rated Power of Drawworks kW 550 735 1100 1470

Speed of Drawworks 4Foward+2Reverse 4Foward+2Reverse 4Foward+2Reverse 4Foward+2Reverse

Main Brake of Drawworks Hydraulic Disc Hydraulic Disc Hydraulic Disc Hydraulic Disc

Auxiliary Brake of Drawworks Eddy Brake Eddy Brake or EATON Eddy Brake or EATON Eddy Brake or EATON

Crown Block TC170 TC225 TC315 TC450

Traveling Block YC225 YC225 YC315 YC450

Hook DG225 DG225 DG315 DG450

Swivel SL225-II SL225-II SL450-II SL450-II

Model of Rotary Table ZP520 or ZP275 ZP520 or ZP275 ZP375 ZP375

Dia. of Opening of Rotary Table 520.7(201/2)or698.5(271/2) 520.7(201/2)or698.5(271/2) 952.5(371/2) 952.5(371/2)

Speed of Rotary Table 4Foward+2Reverse 4Foward+2Reverse 4Foward+2Reverse 4Foward+2Reverse

Model*Number of Mud Pump F-1300 x 1 F-1300 x 2 F-1600 x 2 F-1600 x 2

Drive Mode of Mud Pump Compound drive Compound drive Compound drive Compound drive

Type of Mast K K K K

Working Height of Mast ft 136 141 148 148

Height of Drilling Floor ft 14.8 or 19.68 19.68 or 24.6 24.6 or 29.53 29.53 or 34.45

Drilling Rigs

OUR PRODUCTS

IN GOD WE TRUST


-Three sets of diesel engine coupling and whole chain box are

united to drive the drawworks, mud pump, rotary table, auto-

mated air compressor and energy saving electric generator.

- Diesel + saving energy generators provide the electric.

- The plate brake with the electromagnetism eddying brake

(or Eton brake) is used together with the auxiliary device to the

mast.

- 600kW, 400V AC frequency conversion motor drive the

rotary table to adjust the speed .

- The mast is K type structure. It can go up and down as one

block, and is satisfied for installing a 500 tons top drive.

- The height of drilling floor is 10.5m, and it is assembly with

one operation in lower position.

- The Drilling rig could be equipped with VFD and MCC sys-

tem. VFD is used to control the rotary table motor and auto-

matic bit feed motor.

Five areas of rig layout:1.Drilling floor zone: includes mast, base, rotary table and

independent drive devices, lifting system, wellhe ad mechani-

cal tools, hydraulic casing stabilizer and dog house, driller’s

console.

2.Engine house power zone: includes three A12V190PZL-3/O

diesel engine coupler sets, whole chain box, drawworks,

power saving generator sets, automatic air compressor sets,

diesel engine sets, air source cle aning devices, variable fre-

quency drive, VFD, and MCC control house.

3.Mud pump zone: includes 2 F-1600 mud pumps, drilling flu-

ids valves, manifold and so on.

4.Mud processing and water tank zone: includes mud circula-

tion tank, mud cle aning devices, water tanks and so on.

5.Oil tank zone: includes different types of oil tanks, pumps

and lines.



OUR PRODUCTS

The mud pumps mainly have three models as

SL3NB-1600A, SL3NB-1300A, SL3NB-1000, all of

which are triples single acting pistons. The charac-

teristic of design is that to optimize parameter,

appropriately incre ase stroke and re asonably

lower stroke number to improve the performance of

suctions of pumps.

IN GOD WE TRUST


Mud Pumps

Model SL3NB-1600A SL3NB-1300A SL3NB-1000

Mode Triplex Single Acting Piston Triplex Single Acting Piston Triplex Single Acting Piston

Rated Power kW(hp) 1176(1600) 956(1300) 735(1000)

Rated Strokes Per Minute 120 120 110

Stroke Length mm(in) 305(12) 305(12) 273(103/4)

Ge ar Ratio 3.657/4.206 3.657 3.482

Rated Rotating Speed r/min 438 438 383

Dia. of Suction Inlet inch 12 12 10

Dia. of Discharge Outlet inch 4 4 4

External Size mxmxm 4.72 x 2.82 x 2.66 4.30 x 2.05 x 2.45 3.75 x 2.16 x 2.05

Weight t 27.1 20.8 15.8

Specifications of Mud Pumps:

OUR PRODUCTS

IN GOD WE TRUST


The downhole screw motor is a kind of power tool that trans-

forms the pressure of liquid to mechanical energy in the down-

hole. When the power liquid flows into the screw motor, a

pressure difference is produced between the inlet and outlet of

the motor. The differential pressure drives the motor rotating

round the stator, providing torque moment and speed to the

drill bit, thus the drilling process is performed. The drill pipe is

not rotating during work process, so the advantages are obvi-

ous if comparing with conventional drilling system. The down-

hole screw motor is suitable for vertical, directional and hori-

zontal wells.

Downhole Screw Motors

Model Flow Rate Pressure Rating Max Bit Power Diameter Length WeightI/S Difference Torque Torque Weight kW mm(in) m kg

MPa Nx m Nx m kN

Specifications of Downhole Screw Motors:


5 • ENERGY & TECHNOLOGY CORP

OUR PRODUCTS

The ROTA FLEX pumping units have demonstrated major fe a-

tures and advantages of all kind of pumping units through ye ars

of rese arch and development. As a unique engineering bre ak-

through, the 100% mechanical ROTA FLEX is especially suit-

able for producing high volume fluid in deep wells with rod

pumps.

IN GOD WE TRUST


ROTAFLEX Pumping Units

Main Advantages:

1. Slow, Long Strokes

2. Belt Transmission

3. Low Torque Demand

4. Optimum Structure Design

5. High Reliability and Low Maintenance

Model 1100 1000 900 800 700 600 500

Stroke Length m 8 8 7.3 7.0 6.0 5.0 4.5

Pe ak Polished

Rod load t

22.7 20 16.3 14 12 10 8

Max of Strokes

Per Minute

4 4 4 4 4 5 5

Min of Strokes

Per Minute

Very Low Very Low Very Low Very Low Very Low Very Low Very Low

Conunteweight

Base t

6.1 4.6 4.2 2.7 2.4 1.9 1.7

Counterweight-

Max Aux. t

8.6 9.0 7.2 7.1 6.4 4.8 3.5

Shipping Weight t 26.5 22 19.5 16.5 15.5 12.0 11.0

External Size

(L x W x H)

7.4 x 2.6 x 13.4 7.4 x 2.4 x 13.4 6.6 x 2.4 x 12.4 6.1 x 2.1 x 11.8 5.5 x 2.1 x 10.8 5.5 x 1.9 x 8.9 5.2 x 1.9 x 2.5

Shipping Size

(L x W x H)

13.4 x 2.6 x 3.1 13.4 x 2.4 x 2.8 12.4 x 2.4 x 2.8 11.8 x 2.1 x 2.6 10.8 x 2.1 x 2.5 8.9 x 1.9 x 2.5 8.2 x 1.9 x 2.5

Motor Power kW 75 75 55 45 37 22 18.5

Torque of

Ge arbox

37 37 37 26 26 18 13

Electromagnetism

AutomaticBraking

Yes Yes Yes Yes Yes N/A N/A

Specifications of ROTAFLEX Pumping Units:

OUR PRODUCTS

IN GOD WE TRUST


The PC Pump with surface drive is a new type of production

equipment, which consists of surface drive equipment and a

downhole progressive cavity pump. The surface drive equip-

ment transmits the power to the downhole through the rotat-

ing motion of the suck rod, then drives the rotor to rotate in

the stator downhole. PC pump is a positive displacement

pump. The rotor rotates within the stator, thus a series of

cavities are formed and these cavities progress gradually

from the bottom (suction end) to the top (discharge end), car-

rying the formation fluids through the pump and into the tub-

ing.

Surface Drive Progressive Cavity Pumps

Electric Submersible Progressive Cavity

Pumps

The electric submersible progressive cavity pump (ESPCP) is a

new bre akthrough in artificial lift systems, which combines the

flexibility of the progressive cavity pump with the reliability of the

electric submersible motor to handle your most difficult artificial

lift. It has a wide fluid range, more suitable for deviated and hori-

zontal wells, especially with viscous crude oil, high sand cut and

gas oil. The we ar of tubing and sucker rod is eliminated and ener-

gy cost is reduced significantly.

Type Casing size Rated

Rotating

Speed rpm

PCP

Displacement

m3/d

Lifting

Capacity m

Motor

Power kW

QLB5-1/2 5.1/2”

above

80-360 10-60 1000-1800 12-30

QLB7 7” above 80-360 30-120 1000-1800 22-43

QLB9-5/8 9.5/8”

above

80-360 50-200 900-1800 32-80



OUR PRODUCTS

The workover process of the tubing pump is as follows:

firstly the barrel being connected to the tubing is direct-

ly run into the well at desired depth and then the plunger

is run into the barrel with the sucker rod. The applicable

tubing pump is larger in size than a corresponding rod

pump typically used for the same diameter pipe, The

tubing pump also has a simple structure, g iving it a

gre ater displacement and making it most suitable for

shallow wells with high production.

The THD type of tubing pump me ans that its standing

valve is directly connected to the barrel and it cannot be

pulled up separately with the barrel. The THC or THM

type of tubing pump me ans that its standing valve can

be pulled up separately with the barrel. The se ating

assembly of THC pump is cup type and for THM is

mechanical type. The THC and THM type of tubing

pump are suitable for the frequently work-over wells.

IN GOD WE TRUST


Sub-Surface Sucker Rod Pumps

Specifications of Tubing Pumps:

Model Nominal Dia.mm(in)

Plunger Lengthm(ft)

Stroke m Pump Constant

m3/d

Tubing AndThread

Sucker Rod

20-125TH 32(1.25) 1.2-1.8(4-6) 0.6-7.3 1.14 2 3/8 3/4

25-125TH 32(1.25) 1.2-1.8(4-6) 0.6-7.3 1.14 2 7/8 3/4

20-150TH 38(1.50) 1.2-1.8(4-6) 0.6-7.3 1.64 2 3/8 3/4

25-150TH 38(1.50) 1.2-1.8(4-6) 0.6-7.3 1.64 2 7/8 3/4

20-175TH 44(1.74) 1.2-1.8(4-6) 0.6-7.3 2.24 2 3/8 3/4

25-175TH 44(1.75) 1.2-1.8(4-6) 0.6-7.3 2.24 2 7/8 3/4

25-225TH 57(2.25) 1.2-1.8(4-6) 0.6-7.3 3.69 2 7/8 3/4

30-275TH 70(2.75) 1.2-1.8(4-6) 0.6-7.3 5.50 3 1/2 7/8

35-325TH 83(3.25) 1.2-1.8(4-6) 0.6-7.3 7.70 4 7/8

40-375TH 95(3.75) 1.2-1.8(4-6) 0.6-7.3 10.26 4 1/2 1

OUR PRODUCTS

IN GOD WE TRUST


The rod pump is connected to the sucker rod after being

assembled on the surface then it is lowered down to the well

bottom through the tubing. Thus it is convenient for inspection

and workover because it can be pulled up and down through

the tubing and is therefore suitable for deeper well. The lifes-

pan of the tubing can also be prolonged due to the reduction

of the number of makeup cycles. The rod pump can be clas-

sified into two types: mechanical se ating and cup se ating.

Also it is divided into three types: RHA (stationary he avy well

barrel top anchor rod pump), RHB (stationary he avy well bar-

rel bottom anchor rod pump) and RHT (traveling he avy well

barrel bottom anchor rod pump).

Sub-surface Rod Pumps

Sucker Rod

The sucker rod is an important part of the rod production

equipment which drives the downhole pump from the motor of

the pumping units. We produce the continuous sucker rod,

ordinary sucker rod, pony rod, hollow sucker rod, special

sucker rod, and polished rod.

Grade Yield Strengh

MPa

Tensile

Strengh MPa

Elogation

%

Reduction

of Area %

C larger or equal

to 414

620-793 larger or

equal to 13

larger or

equal to50D larger or equal

to 586

793-965 larger or

equal to 10

larger or

equal to 48

H larger or equal

to 793-862

larger to equal

to 966-1136

larger or

equal to 12

45-55

Mechanical Properties:


1 • ENERGY PIPE. LLC.

INTRODUCTION

IN GOD WE TRUSTENERGY PIPE, LLC.

Energy Pipe, LLC., a subsidiary of Energy & Technology Corp.

has been providing the best pipe for the best price ever since

its inception. Energy Pipe LLC carries an inventory of various

se amless and ERW pipe including OCTG (Oil Country Tubular

Goods) tubing, casing, line-pipe and drill pipe. What sets

Energy Pipe, LLC. apart from other oilfield tubular goods sup-

pliers is our ability to provide superior quality pipe by using

superior quality inspection. All the tubular that Energy Pipe,

LLC has on inventory goes through a rigorous and detailed

inspection conducted by highly experienced inspectors at

Technical Industries, Inc. Technical Industries, Inc. is an ISO

9001:2000 certified company, the first to invent a full length

pipe inspection system approved by the major oil & gas com-

panies, the first to invent the 64 points pipe wall thickness

moving average, the first to invent the 3D VisonArray full

length ultrasonic unit needed to re ach deep oil & gas wells

present technology cannot re ach and provide 3D imaging

inspection of Expandable Pipe in order to complete the first

Expandable Well recently drilled for BP in Oklahoma. Rest

assured that the inspection quality is yet to be matched by

other inspection companies.

We pride ourselves in providing the best experience for our

customers. By making available tools such as our proprietary

online inventory system, customers can e asily see what's

available in an instant. Our quick and e asy contact us form

enables our potential customers to contact us within matter of

few button clicks. Our highly experienced sales te am is

always available for our customers. Ple ase call us at (337)

984-2000 with any questions/concerns and we will make sure

it is taken care of. If you would like to visit us, our physical

address is following:

Petroleum Tower, Suite 530

3639 Ambassador Caffery

Lafayette, LA 70503

Or mail us at following address:

P.O. Box 52523

Lafayette, LA 70505

To view our pipe inventory, log on to:

www.energypipellc.com

And click on the inventory icon.

Energy Pipe LLC.

Best Pipe For The Best Price

OUR PRODUCTS


Specifications Of Tubing And Casing

No. Outside Diameter

inch mm

Wall Thickness

inch mm

Type of end-finish Grade Type of Pipe


1 2 3/8 60.3 0.190 4.83 NUE, EUE J55, N80,L80, P110 Seamless

2 2 7/8 73 0.217 5.51 NUE, EUE J55, N80,L80, P110 Seamless

3 3 1/2 88.9 0.254 6.45 NUE, EUE J55, N80,L80, P110 Seamless

4 4 1/2 114.3 0.205 5.21 STC J55 ERW

5 4 1/2 114.3 0.224 5.69 STC, BTC J55 ERW

6 4/1/2 114.3 0.224 5.69 STC, BTC J55, K55 Seamless

7 4 1/2 114.3 0.250 6.35 STC, LTC, BTC J55 ERW

8 4 1/2 114.3 0.250 6.35 STC, LTC, BTC J55, K55, N80, L80, P110 Seamless

9 4 1/2 114.3 0.290 7.37 LTC, BTC N80, L80, P110 Seamless


11 5 1/2 139.7 0.244 6.20 STC J55 ERW

12 5 1/2 139.7 0.275 6.98 STC, LTC, BTC J55 ERW

13 5 1/2 139.7 0.275 6.98 STC, LTC, BTC J55, K55 Seamless

14 5 1/2 139.7 0.304 7.72 STC, LTC, BTC J55 ERW




18 7 177.8 0.231 5.87 STC J55 ERW

19 7 177.8 0.271 6.91 STC J55 ERW

20 7 177.8 0.317 8.05 STC, LTC, BTC J55 ERW

21 7 177.8 0.317 8.05 STC, LTC, BTC J55, K55, N80, L80, P110 Seamless

22 7 177.8 0.362 9.19 STC, LTC, BTC J55 ERW

23 7 177.8 0.362 9.19 LTC, BTC J55, K55, N80, L80, P110 Seamless

24 7 177.8 0.408 10.36 LTC, BTC N80, L80, P110 Seamless

25 8 5/8 219.1 0.264 6.71 STC J55 ERW

26 8 5/8 219 1 0.304 7.72 STC J55 ERW

27 8 5/8 219.1 0.304 7.72 STC J55, K55 Seamless

OUR PRODUCTS



28 8 5/8 219.1 0.352 8.94 STC, LTC, BTC J55 ERW


30 8 5/8 219.1 0.400 10.16 STC, LTC, BTC J55 ERW



33 9 5/8 244.5 0.312 7.92 STC J55 ERW

34 9 5/8 244.5 0.352 8.94 STC, LTC, BTC J55 ERW


36 9 5/8 244.5 0.395 10.03 STC, LTC, BTC J55 ERW


38 9 5/8 244.5 0.435 11.05 STC, LTC, BTC N80, L80, P110 Seamless

39 9 5/8 244.5 0.472 11.99 STC, LTC, BTC N80, L80, P110 Seamless

40 10 3/4 273.1 0.279 7.09 STC J55 ERW

41 10 3/4 273.1 0.350 8.89 STC, BTC J55 ERW

42 10 3/4 273.1 0.350 8.89 STC, BTC J55, K55 Seamless

43 10 3/4 273.1 0.400 10.16 STC, BTC J55 ERW


45 10 3/4 273.1 0.450 11.43 STC, BTC J55, K55, N80, L80 Seamless

46 13 3/8 339.7 0.330 8.38 STC J55 ERW

47 13 3/8 339.7 0.380 9.65 STC, BTC J55 ERW


49 13 3/8 339.7 0.430 10.92 STC, BTC J55 ERW


51 13 3/8 339.7 0.480 12.19 STC, BTC J55, K55, N80 Seamless

52 13 3/8 339.7 0.514 13.06 STC, BTC N80 Seamless

OUR PRODUCTS


No. Outsider Diameter

inch mm

Grade

Specifications Of Drill Pipe

Casing, tubing and drill pipe are essential items during the

drilling and producing process in the oilfield. The he at tre at-

ment, end upset of smooth pipe, and the machining of the

pipe are performed thoroughly according to related API

Specifications. The production line, equipped with advanced

monitoring instruments can process pipe with the sizes 2 3/8”

through 7”. This production line, the end upset equipment

working jointly with the he at tre atment, is one of the le ading

technology lines among few manufactures. Seven advanced

flow production lines are able to machine 200,000 tons of

tubing, casing, couplings, sieve tube, etc with the sizes 2 3/8”

through 20” and grades J55, K55, N80, L80, P110 annually.


1 2 7/8 73.0 G105, S135

2 3 1/2 88.9 G105, S135

3 4 101.6 G105, S135

4 4 1/2 114.3 G105, S135

5 5 127.0 G105, S135

OUR PRODUCTS


Petroleum Casing Thread Slipping Test Petroleum Casing Tensile Test

Petroleum Casing Blow Test

Quality Assurance Test


OUR PRODUCTS


Inspection Instruments

Photoelectric Length Gauge NDT Flux Leakage Test Meter

Magnetic Particle Defection Test Device Measuring Instrument for Petroleum Casing


OUR PRODUCTS


Production Site and Oversea Market

Large And Wide Worshop

Storage Place Casing for Delivery

Casing for Delivery


1 • TECHNICAL INDUSTRIES

IN GOD WE TRUST

TECHNICAL INDUSTRIES INC.

páåÅÉ= çìê= ÑçìåÇáåÖ= áå= NVTNI= qÉÅÜåáÅ~ä= fåÇìëíêáÉëI= fåÅKI= Ü~ëÄÉÅçãÉ=~=êÉÅçÖåáòÉÇ=äÉ~ÇÉê=áå=ìäíê~ëçåáÅ=éáéÉ=áåëéÉÅíáçå=íÉÅÜJåçäçÖóK=pÉêîáÅÉë=áåÅäìÇÉ=ÑìääJäÉåÖíÜ=ÉäÉÅíêçã~ÖåÉíáÅ=áåëéÉÅíáçåÑçê= çáäJÑáÉäÇ= éáéÉ= ~åÇ= ÉèìáéãÉåí= ~åÇ= Ñìää= äÉåÖíÜ= ìäíê~ëçåáÅáåëéÉÅíáçå=ëóëíÉãë=Ñçê=åÉï=~åÇ=ìëÉÇ=Çêáää=éáéÉI=íìÄáåÖI=Å~ëáåÖ~åÇ=äáåÉJéáéÉK

tÉí= çê= Çêó= jmf= Ej~ÖåÉíáÅ= m~êíáÅäÉ= fåëéÉÅíáçåFX= mq= EaóÉmÉåÉíê~åí= qÉëíáåÖF= çê=rq=pb^= Eräíê~ëçåáÅ= qÉëíáåÖ=çÑ= íÜÉ= ÉåÇ~êÉ~ëF=çÑ=éä~áå=ÉåÇ=~åÇ= íÜêÉ~ÇÉÇ=ÅçååÉÅíáçåëI= áåÅäìÇáåÖ=ÇêáääÅçää~êë= ~åÇ= ÇêáääáåÖ= êáÖ= áåëéÉÅíáçåX= ãáää= ëóëíÉãë= ~åÇ= jáääpìêîÉáää~åÅÉX=íÉëíáåÖ=~åÇ=ÅçåëìäíáåÖ=ëÉêîáÅÉëK

qÉÅÜåáÅ~ä= fåÇìëíêáÉëD=ÉñéÉêáÉåÅÉÇ=ÉåÖáåÉÉêë=~åÇ=íÉÅÜåáÅá~åëIÇÉëáÖå= ~åÇ=ã~åìÑ~ÅíìêÉ= íÜÉ=ãçëí= ~Çî~åÅÉÇ=ìäíê~ëçåáÅ= éáéÉáåëéÉÅíáçå= ÉèìáéãÉåí= ìëÉÇ= áå= íÜÉ=ïçêäÇ= íçÇ~óK=rëÉÇ=Äó= íÜÉïçêäÇDë=ä~êÖÉëí=ëíÉÉä=ãáääë=~åÇ=éêÉÑÉêêÉÇ=Äó=íÜÉ=ïçêäÇDë=ä~êÖÉëíçáä= Åçãé~åáÉëI= íÜáë= éáéÉ= áåëéÉÅíáçå= ÉèìáéãÉåí= áë= íÜÉ= ãçëííÉëíÉÇ= ~åÇ= ~ééêçîÉÇ= ëóëíÉã= áå= íÜÉ= áåÇìëíêóK= lìê= ìäíê~ëçåáÅáåëéÉÅíáçå=ëóëíÉãë=Ü~îÉ= êÉéÉ~íÉÇäó=ëÜçïå= íç=Ü~îÉ=ëìéÉêáçêÑä~ï=ÇÉíÉÅíáçå=Å~é~ÄáäáíáÉëK=qÉÅÜåáÅ~ä= fåÇìëíêáÉëI= fåÅK=ï~ë=íÜÉÑáêëí=Åçãé~åó=íç=ÇÉëáÖå=~åÇ=éêçîáÇÉ=íÜÉ=ìäíê~ëçåáÅ=áåëéÉÅíáçå

a~í~= bî~äì~íáçå= pçÑíï~êÉI= Éå~ÄäáåÖ= íÜÉ= ïçêäÇDë= ä~êÖÉëí= çáäÅçãé~åáÉë= íç=ãÉíáÅìäçìëäó=ëÅêìíáåáòÉ= íÜÉáê= áåëéÉÅíÉÇ=éáéÉ= áåçêÇÉê= íç= ë~ÑÉäó= Çêáää= ~åÇ= ÅçãéäÉíÉ= íÜÉ= ïçêäÇDë= ãçëí= ÅêáíáÅ~äïÉääëK

lìê=ìäíê~ëçåáÅ=ëóëíÉãë=Ü~îÉ= íÜÉ= ä~êÖÉëí=la=~åÇ=éáéÉ= äÉåÖíÜáåëéÉÅíáçå=Å~é~ÄáäáíáÉë=áå=íÜÉ=áåÇìëíêó=Ñçê=éä~áå=ÉåÇ=~åÇ=íÜêÉ~ÇJÉÇ= éáéÉI= ~åÇ= íÜÉ= ÇÉÉéÉëí= éÉåÉíê~íáçå= Å~é~Äáäáíó= çÑÑÉêÉÇ= Ñçêï~ää= íÜáÅâåÉëë= ãÉ~ëìêÉãÉåíK= lìê= ä~êÖÉ= áåëéÉÅíáçå= Ñ~ÅáäáíóIäçÅ~íÉÇ=áå=eçìëíçåI=qÉñ~ë=éêçîáÇÉë=ÉñÅÉääÉåí=éáéÉ=~åÇ=ÉèìáéJãÉåí=ëíçê~ÖÉ=~åÇ=ã~áåíÉå~åÅÉ=ëÉêîáÅÉëK

Our people...our technology...our serv-

ice...our performance. qÜáë=áë=íÜÉ=ÜÉ~êí=çÑ=qÉÅÜåáÅ~äfåÇìëíêáÉëI= fåÅK= = lìê= räíê~ëçåáÅ= póëíÉãë= Ü~îÉ= êÉéÉ~íÉÇäóëÜçïå=íç=Ü~îÉ=ëìéÉêáçê=Ñä~ï=ÇÉíÉÅíáçå=Å~é~ÄáäáíáÉëK

vçì=ÇÉëÉêîÉ=íÜÉ=ÄÉëí=ïÜÉå=áí=ÅçãÉë=íç=éêçíÉÅíáåÖ=íÜÉ=ë~ÑÉíóçÑ= óçìê= éÉçéäÉ= ~åÇ= óçìê= áåîÉëíãÉåíK= cçê= ìåé~ê~ääÉäÉÇ= kaqáåëéÉÅíáçå=Ñçê=ïÉääëI=íìÄìä~êë=~åÇ=ÉèìáéãÉåíëI=Å~ää=íÜÉ=ÉñéÉêíë~í=qÉÅÜåáÅ~ä=fåÇìëíêáÉëI=íÜÉ=fåëéÉÅíáçå=qÉÅÜåçäçÖó=iÉ~ÇÉêK

Welcome to Technical Industries, Inc.

INSPECTION TECHNOLOGY LEADER

kaq=máéÉ=fåëéÉÅíáçå=áåÅäìÇÉë=riqo^plkf`I=bjfI=jmfI=tjmfI=mqI=láäÑáÉäÇ=pÉêîáÅÉëI=~åÇ=píçê~ÖÉKláäÑáÉäÇ=pÉêîáÅÉë=áåÅäìÇÉë=kaq=máéÉ=fåëéÉÅíáçå=çÑ=qìÄáåÖI=`~ëáåÖI=iáåÉJéáéÉI=aêáää=máéÉI=_e^=E_çííçã=eçäÉ^ëëÉãÄäóFI=oÉJÑ~ÅáåÖI=aêáääáåÖ=oáÖëI=qççäë=C=bèìáéãÉåíI=aÉÉé=t~íÉêI=~åÇ=`êáíáÅ~ä=tÉääëK=jáää=pÉêîáÅÉë=áåÅäìÇÉë=ã~åìÑ~ÅíìêáåÖ=çÑ=máéÉ=fåëéÉÅíáçå=bèìáéãÉåí=C=`çåëìäíáåÖK


IN GOD WE TRUST


=====sáëçå^êê~óqj íÉÅÜåçäçÖó=Å~å=ÜÉäé=óçì=ìëÉ=éáéÉ=íÜ~í=éêÉëÉåííÉÅÜåçäçÖó=ÇçÉë=åçí=~ääçï=óçì=íç=ìëÉI=~åÇ=êÉ~ÅÜ=ÇÉéíÜë=íÜ~íçíÜÉêïáëÉ=Å~ååçí=ÄÉ=êÉ~ÅÜÉÇI=~åÇ=ãìÅÜ=ãçêÉK=rëÉ=çÑ=l`qdIÇêáää= éáéÉ= ~åÇ= ä~åÇáåÖ= ëíêáåÖë= ~í= ÇÉÉéÉê= ÇÉéíÜë= áë= äáãáíÉÇ=ÄóÅìêêÉåí= ^mf= ëíêÉåÖíÜ= Ñçêãìä~ëK= tÉ= ~ää= âåçï= íÜ~í= íÜÉêÉ= áë= ìåêÉ~ÇÒ= = = ëíêÉåÖíÜ= êÉã~áåáåÖ= áå= íÜÉëÉ=ã~íÉêá~äë=ïÜÉå= ìëáåÖíÜÉëÉ= Ñçêãìä~ëK=råíáä=åçïI=åç=éáéÉ= áåëéÉÅíáçå=ãÉíÜçÇë=ïÉêÉ~ÄäÉ=íç=ëÜçï=~ÅÅìê~íÉ=êÉã~áåáåÖ=ãÉí~ä=ã~ëë=EÅêçëëJëÉÅíáçå~äJ~êÉ~F=ÉîÉêó=NLQ=áåÅÜ=ÜÉäáñ=~äçåÖ=íÜÉ=äÉåÖíÜ=çÑ=íÜÉ=éáéÉI=íç=~ääçïãçÇáÑáÉÇ= Ñçêãìä~ë= ~åÇ= ~äÖçêáíÜãë= íç= ~ÅÅìê~íÉäó= ÇÉíÉêãáåÉ~Åíì~ä=éáéÉ=ëíêÉåÖíÜK

håçïáåÖ=Éñ~Åí=Åêçëë=ëÉÅíáçå~ä=~êÉ~=åçï=~ääçïë=ÉåÇ=ìëÉêë=~åÇÇêáääáåÖ=Åçåíê~Åíçêë=íç=ìíáäáòÉ=íÜÉáê=ÉñáëíáåÖ=íìÄìä~ê=~åÇ=Çêáää=éáéÉíç=ÇÉÉéÉê=ÇÉéíÜëK

få=çêÇÉê=íç=~ÅÜáÉîÉ=ÇÉÉé=ïÉää=ÇêáääáåÖ=óçì=ã~ó=åÉÉÇ=íç=âåçïíÜÉ=é~ê~ãÉíÉêë=çÑ=íÜÉ=ÑçääçïáåÖWJ tîi=qef`hkbppJ òlppJpb`qflkîJôb^J b``bkqof`fqvJ crii=ibkdqe=la=jb^profkdJ pqo^fdeqkbppJ qeobâ=jb^profkdJ cirfa=slirjbJ fa=jb^probjbkqp

^ää==çÑ=íÜÉ=~ÄçîÉ=é~ê~ãÉíÉêë=Å~å=åçï=ÄÉ=ÇÉíÉêãáåÉÇ=ïáíÜ=íÜÉsfplkôo^vqj PJa= crii= ibkdqe= riqo^plkf`= mfmbfkpmb`qflk=pvpqbj=~î~áä~ÄäÉ=~í=qÉÅÜåáÅ~ä= fåÇìëíêáÉëI= fåÅKEïïïKíÉÅÜåáÅ~äáåÇìëíêáÉëKÅçãF=få=~ÇÇáíáçå=íç=íÜÉ=~ÄçîÉ=Å~é~JÄáäáíáÉëI= éáéÉ= ~åçã~äáÉë= çêáÉåíÉÇ= íê~åëîÉêëÉäóI= äçåÖáíìÇáå~ääó~åÇ=~í=î~êáçìë=çÄäáèìÉ=~åÖäÉë=~êÉ=~äëç=ÇÉíÉÅíÉÇ=~åÇ=Éî~äì~íJÉÇ=Ñçê=~ÅÅÉéí~åÅÉ=çê=êÉàÉÅíáçåK

^ìíçã~íÉÇ=ìäíê~ëçåáÅ=áåëéÉÅíáçå=Ü~ë=~äï~óë=ÄÉÉå=~=íÉÅÜåçäçJÖó= íÜ~í= Ü~ë= Ä~ÑÑäÉÇ= éÉçéäÉK= qÉÅÜåáÅ~ä= fåÇìëíêáÉëI= fåÅK= Ü~ëÇÉëáÖåÉÇ=~=ëóëíÉã=íÜ~í=ïáää=~ääçï=óçì=íç=îáëì~ääó=ëÉÉ=íÜ~í=É~ÅÜáåëéÉÅíáçå= áë= ÇçåÉ= éêçéÉêäóK= kÉáíÜÉê= íÜÉ= áåëéÉÅíáçå= çéÉê~íçêåçê=íÜÉ=ÅìëíçãÉê=Ü~ë=ÉîÉê=ÄÉÉå=~ÄäÉ=íç=î~äáÇ~íÉ=É~ÅÜ=áåëéÉÅJíáçå=ìåíáä=åçïK

qÜáë=íÉÅÜåçäçÖó=ÖáîÉë=íÜÉ=áåëéÉÅíáçå=çéÉê~íçê=~åÇ=ÅìëíçãÉê=~ãÉ~åë=íç=áåëìêÉ=ÉîÉêó=íÉëí=áë=ÅçãéäÉíÉ=~åÇ=íÜçêçìÖÜK=_ó=ÄÉáåÖ~ÄäÉ=íç=îáÉï=íÜÉ=ï~ää=Ç~í~=Ñêçã=íÜÉ=ìäíê~ëçåáÅ=áåëéÉÅíáçåI=íÜÉáåëéÉÅíáçå=çéÉê~íçê=Å~å=ÇÉíÉêãáåÉ=áÑ=ÉîÉêóíÜáåÖ=ïÉåí=ïÉää=ÇìêJáåÖ=íÜÉ=ÉåíáêÉ=áåëéÉÅíáçå=éêçÅÉëëK=qÜáë=~ääçïë=íÜÉ=áåëéÉÅíçê=íçÄÉ=ÅçåÑáÇÉåí=íÜ~í=íÜÉ=ÅçåÇáíáçåë=~êÉ=éÉêÑÉÅí=Ñçê=íÜÉ=Ñä~ï=íê~åëJ

ÇìÅÉêë=íç=íê~åëãáí=íÜÉáê=ëçìåÇ=ï~îÉë=áåíç=íÜÉ=ãÉí~äK

The Process is as follows:

t~ää=íÜáÅâåÉëë=Ç~í~=áë=ë~îÉÇ=áå=~=ã~íêáñK=qÜáë=ã~íêáñ=áë=PSM=ìåáíáå=ïáÇíÜ=Äó= íÜÉ= äÉåÖíÜ=çÑ= íÜÉ=éáéÉ=ÇáîáÇÉÇ=Äó=NLQÒ= K=qÜÉ=PSMìåáíë= áå=ïáÇíÜ= êÉéêÉëÉåí= ÉîÉêó=ÇÉÖêÉÉ= ~êçìåÇ= íÜÉ= ÅáêÅìãÑÉêJÉåÅÉ=çÑ=íÜÉ=éáéÉK=^ë=íÜÉ=éáéÉ=ëéáåë=~åÇ=íÜÉ=íê~åëÇìÅÉêë=íê~JîÉêëÉ=Ççïå=íÜÉ=äÉåÖíÜ=çÑ=íÜÉ=éáéÉI=íÜÉ=ï~ää=íÜáÅâåÉëë=Ç~í~=áëêÉÅçêÇÉÇ=~åÇ=ëíçêÉÇK=^ÑíÉê=íÜÉ=ê~ï=Ç~í~=áë=ÅçääÉÅíÉÇI=íÜÉ=Ç~í~áë=ã~ëë~ÖÉÇ=~åÇ=ëíçêÉÇ=áå=~=ã~íêáñK=qÜáë=ã~íêáñ=Ç~í~=áë=íÜÉåìëÉÇ=íç=î~äáÇ~íÉ=íÜÉ=áåëéÉÅíáçå=~åÇ=íç=Å~äÅìä~íÉ=íÜÉ=ÅêçëëJëÉÅJíáçå~äI=ÉÅÅÉåíêáÅáíó=~åÇ=ã~åó=çíÜÉê=é~ê~ãÉíÉêëK

qÉÅÜåáÅ~ä=fåÇìëíêáÉëI=fåÅK=Ü~ë=ÇÉîÉäçéÉÇ=~=íÉÅÜåáèìÉ=íÜ~í=ïáääãÉ~ëìêÉ= íÜÉ= çìíëáÇÉ= Çá~ãÉíÉê= ElaFI= Ñìää= äÉåÖíÜ= çÑ= ~= àçáåí= çÑéáéÉK=qÜÉ=la=ãÉ~ëìêáåÖ=ëóëíÉã=ïáää=~ÅÅìê~íÉäó=ãÉ~ëìêÉ= íÜÉçìíëáÇÉ=Çá~ãÉíÉê=ÉîÉêó=ÇÉÖêÉÉ=~êçìåÇ=íÜÉ=ÅáêÅìãÑÉêÉåÅÉ=~åÇÉîÉêó=MKORÒ==ëäáÅÉ=Ççïå=íÜÉ=äÉåÖíÜ=çÑ=íÜÉ=éáéÉK=qÜÉ=la=ãÉ~ëJìêÉãÉåí=áë=Éñ~Åí=íç=KMNMÒ=K=qÜÉ=ÉåÇ=êÉëìäí=áë=~å=Éñ~Åí=éÜóëáÅ~äêÉéêÉëÉåí~íáçå=çÑ=íÜÉ=íêìÉ=la=Ççïå=íÜÉ=äÉåÖíÜ=çÑ=íÜÉ=éáéÉK=qÜáëáåÑçêã~íáçå=~ääçïë=Ñçê=íÜÉ=èìáÅâ=Å~äÅìä=~íáçå=çÑ=ÇÉÖêÉÉ=çÑ=çî~äáíóK

qÜáë=ë~ãÉ=ëóëíÉã=áë=~äëç=Å~é~ÄäÉ=çÑ=ÇÉíÉêãáåáåÖ=~åÇ=ãÉ~ëìêJáåÖ=éáéÉ=ëíê~áÖÜíåÉëëK=få=~ÇÇáíáçåI=áÑ=ÉåÇ=ÅçååÉÅíáçåë=~êÉ=ïÉäÇJÉÇ=íç=íÜÉ=éáéÉI=íÜÉ=ëóëíÉã=ïáää=ÇÉíÉêãáåÉ=áÑ=íÜÉ=ÅçååÉÅíáçåë=~êÉïÉäÇÉÇ=é~ê~ääÉä=íç=íÜÉ=~ñáë=çÑ=íÜÉ=éáéÉ=~åÇ=ïÜÉíÜÉê=çê=åçí=íÜÉÅçååÉÅíáçåë=~êÉ=é~ê~ääÉä=íç=É~ÅÜ=çíÜÉêK=fÑ=åçí=é~ê~ääÉäI=íÜÉ=ëóëJíÉã= Å~å= ãÉ~ëìêÉ= íÜÉ= ~ãçìåí= çÑ= çìíJçÑJíçäÉê~åÅÉK= táíÜ= íÜÉÅçãÄáåÉÇ=Ç~í~=çÑ=ï~ää=íÜáÅâåÉëëI=ëíê~áÖÜíåÉëë=~åÇ=la=ãÉ~ëJìêÉãÉåíI=ÑáåáíÉ=ÉäÉãÉåí=~å~äóëáë=Å~å=~äëç=ÄÉ=éÉêÑçêãÉÇK

táíÜ= íÜÉ= ÅçãÄáå~íáçå= çÑ= ~ää= çÑ= íÜáë= íÉÅÜåçäçÖóI= qÉÅÜåáÅ~äfåÇìëíêáÉëI=fåÅK=áë=~ÄäÉ=íç=ãÉ~ëìêÉ=fa=áåÑçêã~íáçå=~ë=ïÉääK=qÜáëíÉÅÜåçäçÖó=~ääçïë=~=îáêíì~ä=ÇêáÑí=íç=ÄÉ=é~ëëÉÇ=Ççïå=íÜÉ=áåëáÇÉçÑ=íÜÉ=éáéÉK=_ó=Ü~îáåÖ=fa=áåÑçêã~íáçåI=ïÉ=~êÉ=~ÄäÉ=íç=ÇÉíÉêãáåÉîçäìãÉK= qÜáë= Å~å=ãçêÉ= ~ÅÅìê~íÉäó= ÇÉíÉêãáåÉ= íÜÉ= ~ãçìåí= çÑÇêáääáåÖ=ãìÇ=çê=ÅÉãÉåí=åÉÉÇÉÇ=Ñçê=óçìê=ïÉääK

aáÑÑÉêÉåí= áã~ÖÉë= ~åÇ= ãçêÉ= áåÑçêã~íáçå= Å~å= ÄÉ= çÄí~áåÉÇ= ~íïïïKíÉÅÜåáÅ~äáåÇìëíêáÉëKÅçãK= lå= íÜÉ= ÜçãÉ= é~ÖÉI= ÅäáÅâ`ìëíçãÉê= fåîÉåíçêóI= ÅäáÅâ= çå= qÉñ~ë= ~åÇ= Ççïåäç~Ç= íÜÉmçïÉêmçáåí= éêÉëÉåí~íáçåK= lå= íÜáë= ë~ãÉ= é~ÖÉ= óçì= Å~å= ~äëçÇçïåäç~Ç=íÜÉ=îáÉïÉê=~åÇ=~=ë~ãéäÉ=éáéÉK

What can VisonArrayTM 3-D Virtual

Imaging technology do for you?


OUR SERVICES

IN GOD WE TRUST


1.- (TI-18) FULL BODY ULTRASONIC.

qfJNU=räíê~ëçåáÅ=áåëéÉÅíáçå=éêçÅÉëë=áåÅäìÇÉë=ëáñíÉÉå=ENSF=Ñä~ïÇÉíÉÅíáçå= íê~åëÇìÅÉêëI= ÅçìéäÉÇ= ïáíÜ= íïç= EOF= ÅçãéêÉëëáçåï~îÉ=íÜáÅâåÉëë=íê~åëÇìÅÉêë=éêçîáÇÉ=~å=áåëéÉÅíáçå=ìåÉèì~äÉÇáå= íçÇ~óDë= ã~êâÉíéä~ÅÉK= cä~ï= ÇÉíÉÅíáçå= íê~åëÇìÅÉêëI= ëÉí= ~íáåÅêÉãÉåíë=çÑ=íïÉåíóJíïç=~åÇ=çåÉ=Ü~äÑ=ÇÉÖêÉÉë=éêçîáÇÉ=íçí~ä~å~äóëáë= Ñçê= ~ää= áãéÉêÑÉÅíáçåë= êÉÖ~êÇäÉëë= çÑ= íÜÉáê= çêáÉåí~íáçåKqê~åëÇìÅÉêë=~í=É~ÅÜ=ÉåÇ=çÑ=íÜÉ=áåëéÉÅíáçå=~êê~ó=~êÉ=Å~é~ÄäÉ=çÑáåíÉêêçÖ~íáçå= çÑ= áãéÉêÑÉÅíáçåë= ïáíÜáå= íïç= EOF= áåÅÜÉë= çÑ= íÜÉÉñéçëÉÇ=éä~áå=ÉåÇ=çÑ=íÜÉ=éáéÉK=aìÉ=íç=íÜÉ=áåÜÉêÉåí=ÑäÉñáÄáäáíó=çÑíÜÉ=~êê~ó=ëÉíìéI=êÉèìÉëíÉÇ=ÅìëíçãÉê=ëéÉÅáÑáÅ~íáçåë=Å~å=É~ëáäó~åÇ=èìáÅâäó=ÄÉ=ëÉíKqÜÉ=ïáÇíÜ=çÑ=íÜÉ=íê~åëÇìÅÉêDë=ÄÉ~ãI=ÑêÉèìÉåÅó=~åÇ=ëáòÉI=~êÉìëÉÇ=íç=Å~äÅìä~íÉ=íÜÉ=ã~ñáãìã=ÜÉäáñ=éÉêãáëëáÄäÉ=Ñçê=~åó=ÖáîÉåÇá~ãÉíÉê=~åÇ=ï~ää=íÜáÅâåÉëë=çÑ=ã~íÉêá~ä=ÄÉáåÖ=áåëéÉÅíÉÇK=qÜáëÜÉäáñ=áë=Åçåëí~åíäó=ÄÉáåÖ=êÉÅçãéìíÉÇ=~åÇ=Çáëéä~óÉÇ=çå=~=ÇáÖJáí~ä=êÉ~Ççìí=Äó=~=ãáÅêçéêçÅÉëëçê=ÇêáîÉå=íçí~äáòÉêK


qfJNM=räíê~ëçåáÅ=fåëéÉÅíáçå=éêçÅÉëë=áë=áåíÉåÇÉÇ=Ñçê=íÜçëÉ=ÅìëJíçãÉêë=íÜ~í=ï~åí=~å=áåëéÉÅíáçå=íÜ~í=áë=Éèìáî~äÉåí=íç=ëí~åÇ~êÇräíê~ëçåáÅ=fåëéÉÅíáçå=çÑÑÉêÉÇ=áå=íçÇ~óDë=ã~êâÉíéä~ÅÉK=kçí=çåäóáë=íÜáë=éêçÅÉëë=ëÉåëáíáîÉ=íç=íÜçëÉ=áãéÉêÑÉÅíáçåë=íÜ~í=çÅÅìê= áåíÜÉ= äçåÖáíìÇáå~ä=~åÇ= íê~åëîÉêëÉ=ÖÉçãÉíêáÅI=Äìí=~äëç= áåÅäìÇÉÇ~êÉ= Ñçìê= EQF= çÄäáèìÉ= Ñä~ï= ÇÉíÉÅíáçå= íê~åëÇìÅÉêëI= ëÉí= ~åÖäÉëÉëí~ÄäáëÜÉÇ=Äó=ÅìëíçãÉê=ëéÉÅáÑáÅ~íáçåëK=qÜÉ=~ëëçÅá~íÉÇ=éêçJÇìÅíáçå= ëéÉÉÇë= ~ééêç~ÅÜ= íÜçëÉ= çÄí~áå~ÄäÉ= Äó= bjfEbäÉÅíêçã~ÖåÉíáÅ=fåëéÉÅíáçåFK=^äíÜçìÖÜ=íÜÉ=qfJNM=áåëéÉÅíáçå=ìëÉë=äÉëë=íê~åëÇìÅÉêëI=~ää=çíÜÉê~ëëçÅá~íÉÇ=ÅêáíÉêá~=çÑ= íÜÉ=qfJNU= áåëéÉÅíáçå= áë= áåÅçêéçê~íÉÇ= íçáåëìêÉ=íÜÉ=ÜáÖÜÉëí=èì~äáíó=~î~áä~ÄäÉ=áå=íÜÉ=ã~êâÉíéä~ÅÉ=íçÇ~óK


qfJS=räíê~ëçåáÅ=fåëéÉÅíáçå=éêçÅÉëë=Ü~ë=~ää=íÜÉ=ÑÉ~íìêÉë=çÑ=íÜÉqfJNM=éêçÅÉëë=ÇÉëÅêáÄÉÇ= áå= íÜÉ=éêÉîáçìë=é~ê~Öê~éÜI=ïáíÜ= íÜÉÉñÅÉéíáçå=íÜ~í=åç=çÄäáèìÉ=~åÖäÉë=~êÉ=áåÅäìÇÉÇK=qÜáë=áåëéÉÅíáçåéêçÅÉëë=áë=éêçîáÇÉÇ=ëéÉÅáÑáÅ~ääó=Ñçê=íÜÉ=ÅäáÉåí=ïÜç=áë=éêáã~êáäóáåíÉêÉëíÉÇ= áå= ~å= áåëéÉÅíáçå= Éèìáî~äÉåí= íç= bjfI= Äìí= ïáíÜáãéêçîÉÇ= ëÉåëáíáîáíó= íç= áåíÉêå~ä= áãéÉêÑÉÅíáçåë= ~åÇ= ~åÉåÜ~åÅÉÇ= ï~ää= íÜáÅâåÉëë= ãÉ~ëìêÉãÉåíK= d~ãã~= ëóëíÉãëìëÉÇ= áå=íçÇ~óDë=bjf=ã~ÅÜáåÉë= áåÇáÅ~íÉ=êÉä~íáîÉ=ï~ää=ÅÜ~åÖÉëÄ~ëÉÇ=ìéçå=~=âåçïå=~êÉ~=íÜáÅâåÉëëK=^í=ÄÉëíI=ÅçîÉê~ÖÉ=çÑ=íÜÉéáéÉ=ï~ää=áë=~Äçìí=íïÉåíóJÑáîÉ=éÉêÅÉåí=EORBFK=qÜÉ=qfJS=áåëéÉÅJíáçåI= ìåäáâÉ= íÜÉ= Ö~ãã~= ëóëíÉãëI= çÑÑÉêë= êÉ~ä= íáãÉ= ìäíê~ëçåáÅíÜáÅâåÉëë=áåëéÉÅíáçå=Ä~ëÉÇ=çå=íÜÉ=~Åíì~ä=îÉäçÅáíó=çÑ=íÜÉ=ã~íÉJ

êá~ä=ÄÉáåÖ=áåëéÉÅíÉÇK=qÜÉ=Ç~í~=éêçîáÇÉÇ=Äó=íÜáë=íóéÉ=áåëéÉÅíáçåçÑÑÉêë= ~ÅÅìê~Åó= çÑ= ~ééêçñáã~íÉäó= éäìë= çê= ãáåìë= çåÉ= íÜçìJë~åÇíÜ=çÑ=~å=áåÅÜ=EKMMN?FK=qÜÉ=áåëéÉÅíáçå=ÅçîÉê~ÖÉ=áë=~=ãáåáJãìã= çÑ= çåÉ= ÜìåÇêÉÇ= ~åÇ= íÉå= éÉêÅÉåí= ENNMBFI= ~åÇ= áëìåÉèì~äÉÇ=Äó=íçÇ~óDë=Ö~ãã~=ëóëíÉãëK=

4.- (LAMSCAN) FULL LENGTH UT WELD

LAMINATION.

räíê~ëçåáÅ=ëÅ~åë=çÑ=íÜÉ=ïÉäÇ=~êÉ~=çÑ=íÜÉ=éáéÉI=ìëáåÖ=íÜÉ=éêçéJÉê=íê~åëÇìÅÉêë=~åÇ= áåëéÉÅíáçå=~ÅÅçêÇáåÖ=íç=qf=Éî~äì~íáçåë=çÑíÜÉ=ã~íÉêá~äK=péÉÅá~ä=ÅìëíçãÉê=êÉèìáêÉãÉåíë=ïáää=ÄÉ=éêçîáÇÉÇïáíÜ=áåÇáîáÇì~ä=èìçíÉëK

5.- (3D-VISONARRAYSM) 3D-VISONARRAYSM

VIRTUAL IMAGING.

qÜÉ=ä~íÉëí=íÉÅÜåçäçÖó=êÉèìáêÉÇ=íç=êÉ~ÅÜ=íÜÉ=ïçêäÇÛë=ÇÉÉéÉëí=çáä~åÇ=Ö~ë=ïÉää=ÇÉéíÜëI=áë=qÉÅÜåáÅ~ä=fåÇìëíêáÉëI=fåÅKI=éêçéêáÉí~êóä~íÉëí= áååçî~íáçåK= kçï= çìê= ÅìëíçãÉêë= Å~å= îáÉïI= Et~äâF= íÜÉéáéÉ= Ñêçã= íÜÉ= áåëáÇÉI= çìíëáÇÉI= ~åÇ= ~ë= Ñä~í= éä~íÉI= ëíçé= ~í= ~åóéçáåí= ~åÇ= îáÉï= íÜÉ=ï~ää= íÜáÅâåÉëëI= ~åÇ= íÜÉ= ÅçåÇáíáçå= çÑ= íÜÉéáéÉK===`~äÅìä~íÉ=íÜÉ=Äìêëí=ê~íÉI=Åçää~éëÉ=ê~íÉI=éìää=ê~íÉ=çÑ=É~ÅÜàçáåíI=çÄí~áå=~=éÉêã~åÉåí=êÉÅçêÇI=~åÇ=Åçãé~êÉ=ÑìíìêÉ=áåëéÉÅJíáçåëI=íÜìë=Éå~ÄäáåÖ=íÜÉ=ÅäáÉåí=íç=éêçàÉÅí=ÑìíìêÉ=äáÑÉ=ÉñéÉÅí~åÅóI~åÇ=ìë~ÖÉ=çÑ=íÜÉ=éáéÉK

6.- (TI-DATA) FULL BODY COMPUTERIZED

DIGITAL DATA WALL PACKAGE.

qÉÅÜåáÅ~ä=fåÇìëíêáÉëI=fåÅKI=áë=íÜÉ=Ñáêëí=íç=ÇÉîÉäçé=íÜáë=íÉÅÜåçäçJÖó= êÉèìáêÉÇ=Äó=ëçãÉ=çÑ= íÜÉ=ã~àçê=çáä= Åçãé~åáÉë= íç=ÇÉîÉäçéëçãÉ=çÑ=íÜÉ=ïçêäÇÛë=ãçëí=ÅêáíáÅ~ä=çáä=C=Ö~ë=ÑáÉäÇëK===qÜÉ=íÉÅÜJåçäçÖó= áåÅäìÇÉë= íÜÉ= Ö~íÜÉêáåÖ= çÑ= åìãÉêçìë= ï~ää= íÜáÅâåÉëëêÉ~ÇáåÖë= ÖêçìéÉÇ= áå= NLQ?= ÜÉäáñ= ~äçåÖ= íÜÉ= äÉåÖíÜ= çÑ= íÜÉ= éáéÉïÜáäÉ= ëÅ~ååáåÖ= íÜÉ= éáéÉ= ÄçÇó= Ñçê= ÇÉÑÉÅíëK= qÜÉ= ÅçãéìíÉêêÉÅçêÇë=íÜÉ=äçïÉëíI=íÜÉ=ÜáÖÜÉëíI=~åÇ=íÜÉ=SQ=éçáåí=~îÉê~ÖÉ=ï~ääíÜáÅâåÉëë=çÑ=íÜÉ=éáéÉK=t~ää=íÜáÅâåÉëë=áë=Çáëéä~óÉÇ=~ë=~=ÅçåíáåJìçìë=Öê~éÜ=ïÜçëÉ=ÜÉáÖÜí= áë=ÇáêÉÅíäó= êÉä~íÉÇ= íç= íÜáÅâåÉëëK=^ääa q̂̂ =ã~ó=ÄÉ=ëíçêÉÇ=áåÇÉÑáåáíÉäó=çå=~=Çáëâ=~åÇ=ã~ó=ÄÉ=îáÉïÉÇ~í=íÜÉ=ÅìëíçãÉêDë=ÅçåîÉåáÉåÅÉK

7.- VisonicTM VIRTUAL IMAGING TI-18.

qÜáë= qÉÅÜåáÅ~ä= fåÇìëíêáÉëI= fåÅKI= éêçéêáÉí~êó= íÉÅÜåçäçÖó= éêçJîáÇÉë=~=îáêíì~ä=áã~ÖÉ=çÑ=íÜÉ=áåëéÉÅíÉÇ=éáéÉ=áå=~=NLQÒE`p^F=ÜÉäáñKqÜÉ=Ç~í~=áë=ëíçêÉÇ=çå=~=ëÉêîÉêK=qÜáë=éêçîáÇÉë=íÜÉ=ÅìëíçãÉê=ïáíÜ~=Pa=îáÉï=çÑ=íÜÉ=éáéÉ=ÅçåÇáíáçå=çÑ=íÜÉ=áåëáÇÉ=~åÇ=íÜÉ==çìíëáÇÉK

Our Services


OUR SERVICES

IN GOD WE TRUST


^äëç=íÜÉ=éáéÉ=Å~å=ÄÉ=îáÉïÉÇ=~ë=~=Ñä~í=éä~íÉK=qÜÉ=ÅìëíçãÉê=Å~åëíçé=~í=~åó=éçáåí=~åÇ=Éñ~ãáåÉ=íÜÉ=ÅçåÇáíáçå=~åÇ=êÉ~Ç=íÜÉ=ï~ääíÜáÅâåÉëë=ïáíÜáå=OLNMMMÒ=~ÅÅìê~ÅóK=_ó=ìëáåÖ=íÜÉ=éêçéÉê=~äÖçJêáíÜãI=íÜÉ=ÅìëíçãÉê=Å~å=Å~äÅìä~íÉ=íÜÉ=ÄìêëíI=Åçää~éëÉI=~åÇ=íÉåJëáäÉ=ëíêÉåÖíÜ=çÑ=É~ÅÜ=éáéÉK=qÜÉ=ÅìëíçãÉê=ïáää=ÄÉ=~ÄäÉ=íç=ÅçãJé~êÉ=éêÉîáçìë=ÅçåÇáíáçåë=íç=~=êÉÅÉåí=çåÉ=~åÇ=ÄÉ=~ÄäÉ=íç=éêçàJÉÅí=ÑìíìêÉ=äáÑÉ=ÉñéÉÅí~åÅó=çÑ=íÜÉ=éáéÉK=qÜáë=ëÉêîáÅÉÇ=áë=éêçîÉÇJÉÇ= ïáíÜ= cìää= iÉåÖíÜ= rq= qfJNU= ïÜáÅÜ= áåÅäìÇÉë= ëÅ~ååáåÖ= íÜÉéáéÉë=Ñçê=ÇÉÑÉÅíë=ÉîÉêó=OOKR=ÇÉÖêÉÉë=~äçåÖ=íÜÉ=ëìêÑ~ÅÉ=çÑ=íÜÉéáéÉK

8.- ELECTRONIC DATA TRANSMISSIONThis technology includes the recordation of all wall thickness

data of the pipe, and provides 360 wall thickness readings for

each 1/4”CSA slice all along the length of the pipe. One read-

ing for each degree along the circumference of the 1/4”CSA

slice. The data is compiled using Technical Industries, Inc.,

proprietary software in order to display the pipe in 3D virtual

imaging. This service is offered in conjunction with Full Length

UT TI-18 VisonicTM Services.

9.- (TECHLOG®)TECHLOG FULL BODY ELEC-

TROMAGNETIC INSPECTION, FOUR (4) FUNC-

TIONS. rëì~ääó=ìëÉÇ=Ñçê=éáéÉ=ïáíÜ=ï~ää=íÜáÅâåÉëë=åçí=íç=ÉñÅÉÉÇ=MKQPM?ìëáåÖ= qÉÅÜåáÅ~ä= fåÇìëíêáÉëD= ÑçìêJÑìåÅíáçå= ÉäÉÅíêçã~ÖåÉíáÅáåëéÉÅíáçå= ìåáíI= çáä= Åçìåíêó= íìÄìä~êI= áå= ëáòÉë= OJNLNS= áåÅÜíÜêçìÖÜ=NPJPLU=áåÅÜ=Çá~ãÉíÉêI=Å~å=ÄÉ=ëÅ~ååÉÇ=Ñçê=äçåÖáíìÇáå~äIíê~åëîÉêëÉ=~åÇ=ï~ää=íÜáÅâåÉëë=~åçã~äáÉëI=éäìë=éáéÉ=Öê~ÇÉ=îÉêJáÑáÅ~íáçåK=qç= äçÅ~íÉ= äçåÖáíìÇáå~ä= ~åçã~äáÉëI= ~= íê~åëîÉêëÉäó= çêáÉåíÉÇ~ÅíáîÉ=ã~ÖåÉíáÅ=ÑáÉäÇ=áë=áåÇìÅÉÇ=áåíç=íÜÉ=íìÄìä~ê=íç=ÄÉ=áåëéÉÅíJÉÇ= ~ë= íÜÉ= éáéÉ= áë= ÅçåîÉóÉÇ= íÜêçìÖÜ= íÜÉ= áåëéÉÅíáçå= ìåáíKqê~åëÇìÅÉêëI=ÑáñÉÇ=~í=~=åáåÉíóJÇÉÖêÉÉ=EVMçF=~åÖäÉ=~ë=êÉÑÉêÉåÅÉÇíç= íÜÉ= ã~ÖåÉíáÅ= ÑáÉäÇI= ÇÉíÉÅí= ?Ñäìñ= äÉ~â~ÖÉ?= Å~ìëÉÇ= Äó= ~åóáãéÉêÑÉÅíáçå=ïÜçëÉ= ÇÉéíÜ= ~åÇ= çêáÉåí~íáçå= ÅçáåÅáÇÉ=ïáíÜ= íÜÉäçåÖáíìÇáå~ä=Å~äáÄê~íáçå=~åÇ=~êÉ= êÉÅçêÇÉÇ=çå=~=ëíêáé=ÅÜ~êí= Ñçêä~íÉê=áåîÉëíáÖ~íáçåK=qç=äçÅ~íÉ=íê~åëîÉêëÉ=~åÇ=íÜêÉÉJÇáãÉåëáçå~ä=~åçã~äáÉëI=~=äçåJÖáíìÇáå~ä=ã~ÖåÉíáÅ=ÑáÉäÇ=áë=áåÇìÅÉÇ=áåíç=íÜÉ=éáéÉ=ÄçÇóI=ÖÉåÉêJ~íáåÖ=~=ã~ÖåÉíáÅ= ÑáÉäÇ= áå=ÉñÅÉëë=çÑ=URM= ÑêÉÉ=~áê=Ö~ìëëK=báÖÜíÇÉíÉÅíáçå=ëÜçÉëI=Åçåí~áåáåÖ= íê~åëÇìÅÉêëI= êáÇÉ=çå=íÜÉ=çìíëáÇÉëìêÑ~ÅÉ= çÑ= íÜÉ= íìÄìä~ê= ÄÉáåÖ= áåëéÉÅíÉÇK= ^ää= ?Ñäìñ= äÉ~â~ÖÉ?Å~ìëÉÇ= Äó= íê~åëîÉêëÉ= çê= íÜêÉÉJÇáãÉåëáçå~ä= ~åçã~äáÉë= ~êÉêÉÅçêÇÉÇ=çå=~=ëíêáé=ÅÜ~êí=Ñçê=ÑìêíÜÉê=áåîÉëíáÖ~íáçåK=qç=Éñ~ãáåÉ=íÜÉ=éáéÉ=ï~ää=íç=ÇÉíÉêãáåÉ=~ÅÅÉéí~ÄäÉ=ï~ää=íÜáÅâJåÉëëI=~=ê~Çáç~ÅíáîÉ=ÄÉ~ã=~åÇ=~=ÇÉíÉÅíçê=ãÉÅÜ~åáëã=~êÉ=ìëÉÇEd~ãã~=o~óFK=lìíéìí=çÑ=íÜáë=ï~ää=íÜáÅâåÉëë=ÇÉíÉÅíáçå=ëóëíÉã

áë=êÉÅçêÇÉÇ=çå=~=ëíêáé=ÅÜ~êí=êÉÅçêÇÉê=Ñçê=ÑìêíÜÉê=áåîÉëíáÖ~íáçåK=qç=îÉêáÑó=éáéÉ=Öê~ÇÉI=~=ëóëíÉã=ãÉ~ëìêáåÖ=ã~íÉêá~ä=éÉêãÉ~ÄáäáJíó= ~Ö~áåëí= ~= âåçïå= ëí~åÇ~êÇI= áë= ìëÉÇK= fÑ= ~= ÇáëÅêÉé~åÅó= áëåçíÉÇI= ~å= ~ìÇáÄäÉ= ï~êåáåÖ= áë= ÖÉåÉê~íÉÇ= ~åÇ= áë= ÑçääçïÉÇ= Äóã~åì~ä=ÅçåÑáêã~íáçå=çÑ=íÜÉ=éáéÉ=Öê~ÇÉK=

10.- (TECHSCOPE®) TECHSCOPE®

ELECTROMAGNETIC TRANSVERSE RACK

INSPECTION. báÖÜí=ÉäÉÅíêçã~ÖåÉíáÅ=íê~åëÇìÅÉêë=ãçìåíÉÇ= áåëáÇÉ=~=ÅáêÅìãJÑÉêÉåíá~ä=~äìãáåìã=ÅóäáåÇÉê=ÇÉëáÖåÉÇ= íç= Ñáí= Ñáêãäó=çå= íÜÉ=çìíJëáÇÉ=ëìêÑ~ÅÉ=çÑ=íÜÉ=éáéÉI=íê~îÉäë=~äçåÖ=íÜÉ= äÉåÖíÜ=çÑ=íÜÉ=éáéÉëÉ~êÅÜáåÖ=Ñçê=íê~åëîÉêëÉ=ÇÉÑÉÅíë=ÖÉåÉê~íÉÇ=Äó=ÇáëêìéíÉÇ=äçåJÖáíìÇáå~ä=ã~ÖåÉíáÅ=ÑáÉäÇI=íÜÉ=éêçÅÉëë=áë=ìëì~ääó=ìëÉÇ=íç=áåëéÉÅíìëÉÇ=aêáää=máéÉ= Eqç=ë~íáëÑó=^mf=om=Td=pÉÅíáçå=NM=~åÇ=rpbaaofii=mfmb=apJN=fkpmb`qflk=` q̂bdlov=PI=Q=C=RK=qe=eáääapJN=pq̂ kaôaK

11.- (FL-OD) FULL LENGTH OD GAUGE.qÜÉ=ÉåíáêÉ=äÉåÖíÜ=çÑ=íÜÉ=íìÄÉ=ÉñÅäìÇáåÖ=íççä=àçáåíë=çê=ÅçååÉÅJíáçåë=ïáää= êÉÅÉáîÉ=la=Ö~ìÖÉ= áåëéÉÅíáçåK= = = fÑ= ~Äåçêã~ä=la= áëÇÉíÉÅíÉÇI=~å=ìäíê~ëçåáÅ=ÅçãéêÉëëáçå=áåëíêìãÉåí=Ñçê=ï~ää=íÜáÅâJåÉëë=~í=íÜÉ=ã~ñáãìã=ïÉ~ê=ïáää= áåëéÉÅí=íÜÉ=~êÉ~=íÜ~í=êÉÅçêÇëíÜÉ=ãçëí=la=ïÉ~êI=~åÇ=íÜÉ=êÉ~ÇáåÖë=ïáää=ÄÉ=êÉÅçêÇÉÇK

12.- (FL-MPI-L ID OR OD) FULL BODY MAGNETIC

PARTICLE INSPECTION. ilkdfqrafkî= abcb`qp

la=lo=fa=lc=qeb=bkqfob=qr_b=buìrafkd=qeobâpK^=ÅáêÅìãÑÉêÉåíá~ä=ÑáÉäÇ=çê=äçåÖáíìÇáå~ä=ÑáÉäÇ=áë=áåÇìÅÉÇ=áåíç=íÜÉéáéÉ=íç=ÄÉ=áåëéÉÅíÉÇI=ìëáåÖ=~=Å~é~ÅáíáîÉ=ÇáëÅÜ~êÖÉ=ëóëíÉã=ÑçêäçåÖáíìÇáå~ä= ÇÉÑÉÅíë= çÑ= ~ÇÉèì~íÉ= ëáòÉ= Ñçê= íÜÉ=ã~íÉêá~ä= ÄÉáåÖáåëéÉÅíÉÇK=qÜÉ=Ñìää=äÉåÖíÜ=çÑ=íÜÉ=íìÄìä~ê=áë=îáëì~ääó=ÅÜÉÅâÉÇ=çåíÜÉ=çìíëáÇÉ=çê=íÜÉ=áåëáÇÉ=Ñçê=~åó=ÇáëÅçåíáåìáíáÉëK=aêó=áêçå=éçïJÇÉê=áë=íÜ~å=~ééäáÉÇ=íç=íÜÉ=ÉåíáêÉ=çìíëáÇÉ=çê=áåëáÇÉ=ëìêÑ~ÅÉK=^ääéçïÇÉê=~ÅÅìãìä~íáçåë=Å~ìëÉÇ=Äó=?Ñäìñ=äÉ~â~ÖÉ?=~í=íÜÉ=ëáíÉ=çÑ~å=~åçã~äó=áë=éêçÄÉÇ=~åÇ=áÑ=áåëìÑÑáÅáÉåí=íç=Å~ìëÉ=êÉàÉÅíáçå=çÑíÜÉ=ã~íÉêá~äI=~êÉ=êÉãçîÉÇ=~åÇ=íÜÉ=ëìêÑ~ÅÉ=ÅçåíçìêÉÇK=

13.- (FL-MPI-L ID & OD) FULL BODY MAGNETIC

PARTICLE INSPECTION. ilkdfqrafkî= abcb`qp

la=C=fa=lc=qeb=bkqfob=qr_b=buìrafkd=qeobâpK==^=ÅáêÅìãÑÉêÉåíá~ä=ÑáÉäÇ=áë=áåÇìÅÉÇ=áåíç=íÜÉ=éáéÉ=íç=ÄÉ=áåëéÉÅíJÉÇI=ìëáåÖ=~=Å~é~ÅáíáîÉ=ÇáëÅÜ~êÖÉ=ëóëíÉã=çÑ=~ÇÉèì~íÉ=ëáòÉ=ÑçêíÜÉ=ã~íÉêá~ä=ÄÉáåÖ=áåëéÉÅíÉÇK=qÜÉ=Ñìää= äÉåÖíÜ=çÑ=íÜÉ=íìÄìä~ê=áëîáëì~ääó=ÅÜÉÅâÉÇ=çå=íÜÉ=áåëáÇÉ=~åÇ=çìíëáÇÉ=Ñçê=~åó=ÇáëÅçåíáåìJáíáÉëK=aêó=áêçå=éçïÇÉê=áë=íÜ~å=~ééäáÉÇ=íç=íÜÉ=ÉåíáêÉ=çìíëáÇÉ=ëìêJÑ~ÅÉK=^ää= éçïÇÉê=~ÅÅìãìä~íáçåë=Å~ìëÉÇ=Äó= ?Ñäìñ= äÉ~â~ÖÉ?=~í


OUR SERVICES

íÜÉ=ëáíÉ=çÑ=~å=~åçã~äó= áë=éêçÄÉÇ=~åÇ= áÑ= áåëìÑÑáÅáÉåí= íç=Å~ìëÉêÉàÉÅíáçå= çÑ= íÜÉ=ã~íÉêá~äI= ~êÉ= êÉãçîÉÇ= ~åÇ= íÜÉ= ëìêÑ~ÅÉ= ÅçåJíçìêÉÇK=

14.- (FL-MPI-L&T OD) FULL BODY MAGNETIC

PARTICLE INSPECTION. ilkdfqrafkî= C= qo^kpJ

sbopb=la=abcb`qp=lc=qeb=bkqfob=qr_b=fkìrafkd=rmJ

pbqpI=^ka=buìrafkd=qeobâpK^=ÅáêÅìãÑÉêÉåíá~ä=ÑáÉäÇ=áë=áåÇìÅÉÇ=áåíç=íÜÉ=éáéÉ=íç=ÄÉ=áåëéÉÅíJÉÇI=ìëáåÖ=~=Å~é~ÅáíáîÉ=ÇáëÅÜ~êÖÉ=ëóëíÉã=~åÇ=~=a`=Åçáä=áë=ìëÉÇÑçê=áåÇìÅáåÖ=~=äçåÖáíìÇáå~ä=ÑáÉäÇ=çÑ=~ÇÉèì~íÉ=ëáòÉ=Ñçê=íÜÉ=ã~íÉJêá~ä=ÄÉáåÖ= áåëéÉÅíÉÇK=qÜÉ= Ñìää= äÉåÖíÜ=çÑ= íÜÉ= íìÄìä~ê= áë=îáëì~ääóÅÜÉÅâÉÇ=çå=íÜÉ=çìíëáÇÉ=Ñçê=~åó=ÇáëÅçåíáåìáíáÉëK=aêó=áêçå=éçïJÇÉê=áë=íÜ~å=~ééäáÉÇ=íç=íÜÉ=ÉåíáêÉ=çìíëáÇÉ=~åÇ=áåëáÇÉ=ëìêÑ~ÅÉK=^ääéçïÇÉê=~ÅÅìãìä~íáçåë=Å~ìëÉÇ=Äó=?Ñäìñ=äÉ~â~ÖÉ?=~í=íÜÉ=ëáíÉ=çÑ~å=~åçã~äó=áë=éêçÄÉÇ=~åÇ=áÑ=áåëìÑÑáÅáÉåí=íç=Å~ìëÉ=êÉàÉÅíáçå=çÑíÜÉ=ã~íÉêá~äI=~êÉ=êÉãçîÉÇ=~åÇ=íÜÉ=ëìêÑ~ÅÉ=ÅçåíçìêÉÇK=

15.- (FL-MPI-L&T- OD & ID) FULL BODY MAG-

NETIC PARTICLE INSPECTION. ilkdfqrafkî= C

qo^kpsbopb= abcb`qp= la= C= fa= lc= qeb= bkqfob= qr_b

fkìrafkd=rmJpbqpI=buìrafkd=qeobâpK^=ÅáêÅìãÑÉêÉåíá~ä=ÑáÉäÇ=áë=áåÇìÅÉÇ=áåíç=íÜÉ=éáéÉ=íç=ÄÉ=áåëéÉÅíJÉÇI=ìëáåÖ=~=Å~é~ÅáíáîÉ=ÇáëÅÜ~êÖÉ=ëóëíÉã=Ñçê= íê~åëîÉêëÉ= ÑáÉäÇI~åÇ= ~=a`= Åçáä= Ñçê= äçåÖáíìÇáå~ä= ÑáÉäÇ= çÑ= ~ÇÉèì~íÉ= ëáòÉ= Ñçê= íÜÉã~íÉêá~ä=ÄÉáåÖ=áåëéÉÅíÉÇK=qÜÉ=Ñìää=äÉåÖíÜ=çÑ=íÜÉ=íìÄìä~ê=áë=îáëìJ~ääó= ÅÜÉÅâÉÇ= áåëáÇÉ= ~åÇ=çìí= Ñçê= ~åó=ÇáëÅçåíáåìáíáÉëK=aêó= áêçåéçïÇÉê=áë=íÜ~å=~ééäáÉÇ=íç=íÜÉ=ÉåíáêÉ=çìíëáÇÉ=ëìêÑ~ÅÉK=^ää=éçïJÇÉê=~ÅÅìãìä~íáçåë=Å~ìëÉÇ=Äó=?Ñäìñ=äÉ~â~ÖÉ?=~í=íÜÉ=ëáíÉ=çÑ=~å~åçã~äó=áë=éêçÄÉÇ=~åÇ=áÑ=áåëìÑÑáÅáÉåí=íç=Å~ìëÉ=êÉàÉÅíáçå=çÑ=íÜÉã~íÉêá~äI=~êÉ=êÉãçîÉÇ=~åÇ=íÜÉ=ëìêÑ~ÅÉ=ÅçåíçìêÉÇK=

16.- (TI CAMERA) CAMERA.sáëì~ä=áåëéÉÅíáçå=çÑ=íÜÉ=áåëáÇÉ=ëìêÑ~ÅÉ=çÑ=íÜÉ=íìÄìä~êI=ìëáåÖ=~Å~ãÉê~=ëáãáä~ê=íç=Å~ãîáëáçåK=fã~ÖÉë=Å~å=ÄÉ=êÉÅçêÇÉÇ=Ñçê=ä~íÉêîáÉïáåÖK

17- (FLD) FULL LENGTH DRIFT IN OR NOT IN

CONJUNCTION WITH FULL BODY UT OR EMI. qÜÉ=äÉåÖíÜ=çÑ=íÜÉ=íìÄÉ=áë=Ö~ìÖÉÇ=ïáíÜ=~=ã~åÇêÉä=íç=ÇÉíÉêãáåÉÅçãéäá~åÅÉ=ïáíÜ=^mf=çê=ÅìëíçãÉê=ëéÉÅáÑáÅ~íáçå=áåíÉêå~ä=Çá~ãJÉíÉê=ëéÉÅáÑáÅ~íáçåëK=fÑ=ëéÉÅá~ä=Çá~ãÉíÉê=ã~åÇêÉä=áë=êÉèìáêÉÇI=íÜÉÅçëí=çÑ=ã~åìÑ~ÅíìêáåÖ=ïáää=ÄÉ=êÉJÄáääÉÇ=íç=íÜÉ=ÅäáÉåíK=

18.- (LAMSCAN) LAMINATION SCANS.qç=áåëìêÉ=íÜ~í=åç=áåàìêáçìë=ä~ãáå~íáçå=áë=éêÉëÉåí=áå=íÜÉ=ÉåÇ=~êÉ~

çÑ=éä~áå=ÉåÇ=éáéÉ=íÜ~í=ïáää=ä~íÉê=ÄÉ=íÜêÉ~ÇÉÇ=çê=ïÉäÇÉÇK==rëáåÖìäíê~ëçåáÅ= áåëíêìãÉåí~íáçåI= áå= ÅçåàìåÅíáçå= ïáíÜ= éêçéÉê= ìäíê~JëçåáÅ=íê~åëÇìÅÉêI=íÜÉ=ÅáêÅìãÑÉêÉåÅÉ=çÑ=íÜÉ=éáéÉ=áë=ÅçãéäÉíÉäóëÅ~ååÉÇ=Ñçê=çåÉ=áåÅÜ=Ñêçã=íÜÉ=éáéÉ=ÉåÇK

19.- (DrySEA-2) DRY SEA MAGNETIC PARTI-

CLE SPECIAL END AREA INSPECTION FOR

THREADED PIPE CRITICAL APPLICATION.qÜÉ=Çêó=ëéÉÅá~ä=ÉåÇ=~êÉ~=áåëéÉÅíáçå=áë=éÉêÑçêãÉÇ=çå=ÑÉêêçã~ÖJåÉíáÅ=ã~íÉêá~äK= qÜÉ=~êÉ~= íç=ÄÉ= áåëéÉÅíÉÇ=ãìëí=ÄÉ= íÜçêçìÖÜäóÅäÉ~åÉÇ=ÄÉÑçêÉ=ÄÉÖáååáåÖ=íÜÉ=áåëéÉÅíáçå=éêçÅÉëëK=^ÑíÉê=~=îáëìJ~ä=íÜêÉ~Ç=áåëéÉÅíáçå=áë=éÉêÑçêãÉÇI=~=a`=ã~ÖåÉíáÅ=ÑáÉäÇI=éêçéÉêJäó= çêáÉåíÉÇ= ~ÅÅçêÇáåÖ= íç= íÜÉ= áåëéÉÅíáçå= íç= ÄÉ= éÉêÑçêãÉÇI= áëáåÇìÅÉÇ=áåíç=íÜÉ=éáéÉK=aêó=áêçå=éçïÇÉê=áë=~ééäáÉÇ=íç=íÜÉ=~êÉ~K^åó= ~ÅÅìãìä~íáçå= çÑ= éçïÇÉê= ~í= íÜÉ= éçáåí= çÑ= Ñäìñ= äÉ~â~ÖÉIÅ~ìëÉÇ=Äó=~å=~åçã~äóI=ïáää=ÄÉ=éêçÄÉÇK=pÜçìäÇ=íÜÉ=~åçã~äó=ÄÉáåëìÑÑáÅáÉåí=Ñçê=êÉàÉÅíáçå=çÑ=íÜÉ=ã~íÉêá~äI=íÜÉ=áãéÉêÑÉÅíáçå=ïáää=ÄÉêÉãçîÉÇ=~åÇ=íÜÉ=~êÉ~=ÅçåíçìêÉÇK

20.- (Dry Mag. AC Threaded-NC) DRY SEA

MAGNETIC PARTICLE FOR THREADED & COU-

PLED PIPE NON-CRITICAL APPLICATION. qÜÉ= Çêó= ëéÉÅá~ä= ÉåÇ= ~êÉ~= áåëéÉÅíáçå= áë= éÉêÑçêãÉÇ= çå= ÑÉêêçJã~ÖåÉíáÅ=ã~íÉêá~äK= qÜÉ= ~êÉ~= íç= ÄÉ= áåëéÉÅíÉÇ=ãìëí= ÄÉ= íÜçêJçìÖÜäó=ÅäÉ~åÉÇ=ÄÉÑçêÉ=ÄÉÖáååáåÖ=íÜÉ=áåëéÉÅíáçå=éêçÅÉëëK=^ÑíÉê~=îáëì~ä= íÜêÉ~Ç= áåëéÉÅíáçå= áë=éÉêÑçêãÉÇI=^K`K=ã~ÖåÉíáÅ= ÑáÉäÇIìëáåÖ=~=óçâÉ=çê=çíÜÉê=áåëíêìãÉåí=éêçéÉêäó=çêáÉåíÉÇ=~ÅÅçêÇáåÖíç= íÜÉ= áåëéÉÅíáçå= íç=ÄÉ=éÉêÑçêãÉÇI= áë= áåÇìÅÉÇ= áåíç= íÜÉ=éáéÉKaêó= áêçå=éçïÇÉê= áë=~ééäáÉÇ= íç= íÜÉ=~êÉ~K=^åó=~ÅÅìãìä~íáçå=çÑéçïÇÉê=~í=íÜÉ=éçáåí=çÑ=Ñäìñ=äÉ~â~ÖÉI=Å~ìëÉÇ=Äó=~å=~åçã~äóI=ïáääÄÉ=éêçÄÉÇK=pÜçìäÇ=íÜÉ=~åçã~äó=ÄÉ=áåëìÑÑáÅáÉåí=Ñçê=êÉàÉÅíáçå=çÑíÜÉ=ã~íÉêá~äI= íÜÉ= áãéÉêÑÉÅíáçå=ïáää= ÄÉ= êÉãçîÉÇ= ~åÇ= íÜÉ= ~êÉ~ÅçåíçìêÉÇK

21.- (DrySEA-2-PE-CA) DRY SEA MAGNETIC

PARTICLE FOR PLAIN END PIPE CRITICAL

APPLICATION.

qÜÉ= Çêó= ëéÉÅá~ä= ÉåÇ= ~êÉ~= áåëéÉÅíáçå= áë= éÉêÑçêãÉÇ= çå= ÑÉêêçJã~ÖåÉíáÅ=ã~íÉêá~äK= qÜÉ= ~êÉ~= íç= ÄÉ= áåëéÉÅíÉÇ=ãìëí= ÄÉ= íÜçêJçìÖÜäó=ÅäÉ~åÉÇ=ÄÉÑçêÉ=ÄÉÖáååáåÖ=íÜÉ=áåëéÉÅíáçå=éêçÅÉëëK=^ÑíÉê~=îáëì~ä=áåëéÉÅíáçå=áë=éÉêÑçêãÉÇI=~=a`=ã~ÖåÉíáÅ=ÑáÉäÇI=éêçéÉêJäó= çêáÉåíÉÇ= ~ÅÅçêÇáåÖ= íç= íÜÉ= áåëéÉÅíáçå= íç= ÄÉ= éÉêÑçêãÉÇI= áëáåÇìÅÉÇ=áåíç=íÜÉ=éáéÉK=aêó=áêçå=éçïÇÉê=áë=~ééäáÉÇ=íç=íÜÉ=~êÉ~K^åó= ~ÅÅìãìä~íáçå= çÑ= éçïÇÉê= ~í= íÜÉ= éçáåí= çÑ= Ñäìñ= äÉ~â~ÖÉIÅ~ìëÉÇ=Äó=~å=~åçã~äóI=ïáää=ÄÉ=éêçÄÉÇK=pÜçìäÇ=íÜÉ=~åçã~äó=ÄÉáåëìÑÑáÅáÉåí= Ñçê= êÉàÉÅíáçå=çÑ= íÜÉ=ã~íÉêá~äI= íÜÉ= áãéÉêÑÉÅíáçå=ïáääÄÉ=êÉãçîÉÇ=~åÇ=íÜÉ=~êÉ~=ÅçåíçìêÉÇK

IN GOD WE TRUST



OUR SERVICES

IN GOD WE TRUST


22.- (Wet-SEA-2-Threaded CA) WET SEA FOR

THREADED PIPE FOR CRITICAL APPLICATIONS.qÜáë=áåëéÉÅíáçå=éêçÅÉëëI=ìëáåÖ=ÑáåÉäó=ÖêçìåÇ=áêçå=éçïÇÉê=ëìëJéÉåÇÉÇ=áå=~=ÑäìáÇI=áë=ìëÉÇ=íç=áåëéÉÅí=íÜÉ=ÉåÇë=çÑ=ÑÉêêçã~ÖåÉíJáÅ= íìÄìä~êK= qÜÉ= ~êÉ~= íç= ÄÉ= áåëéÉÅíÉÇ= ãìëí= ÄÉ= íÜçêçìÖÜäóÅäÉ~åÉÇ=ÄÉÑçêÉ=ÄÉÖáååáåÖ=íÜÉ=áåëéÉÅíáçå=éêçÅÉëëK=qÜáë=áë=ÑçäJäçïÉÇ=Äó=~=îáëì~ä=íÜêÉ~Ç=áåëéÉÅíáçåK=^=ã~ÖåÉíáÅ=ÑáÉäÇI=ïÜçëÉÇáêÉÅíáçå=áë=~ééêçéêá~íÉ=Ñçê=íÜÉ=áåëéÉÅíáçå=ÄÉáåÖ=éÉêÑçêãÉÇI=áëíÜ~å=áåÇìÅÉÇ=áåíç=íÜÉ=íìÄìä~êK=^=Ä~íÜ=ïáíÜ=íÜÉ=ëìëéÉåÇÉÇ=ÑäìJçêÉëÅÉåí= áêçå= é~êíáÅäÉë= áë= íÜ~å= ~ééäáÉÇ= ~åÇ= íÜÉ= ~êÉ~= îáÉïÉÇìåÇÉê=~å=ìäíê~îáçäÉí=ä~ãéK=^åó=~åçã~äáÉë=ÑçìåÇ=ïáää=ÄÉ=éêçÄÉÇÑçê=ÇÉéíÜK=få=íÜÉ=ÉîÉåí=íÜÉ=~åçã~äó=áë=áåëìÑÑáÅáÉåí=Ñçê=êÉàÉÅíáçåçÑ=íÜÉ=ã~íÉêá~äI=íÜÉ=~åçã~äó=ïáää=ÄÉ=êÉãçîÉÇ=~åÇ=íÜÉ=~êÉ~=ÅçåJíçìêÉÇK

23.- (WetSEA-2-PE-CA) WET SEA FOR PLAIN

END PIPE FOR CRITICAL APPLICATIONS. qÜáë=áåëéÉÅíáçå=éêçÅÉëëI=ìëáåÖ=ÑáåÉäó=ÖêçìåÇ=áêçå=éçïÇÉê=ëìëJéÉåÇÉÇ=áå=~=ÑäìáÇI=áë=ìëÉÇ=íç=áåëéÉÅí=íÜÉ=ÉåÇë=çÑ=ÑÉêêçã~ÖåÉíJáÅ= íìÄìä~êK= qÜÉ= ~êÉ~= íç= ÄÉ= áåëéÉÅíÉÇ= ãìëí= ÄÉ= íÜçêçìÖÜäóÅäÉ~åÉÇ=ÄÉÑçêÉ=ÄÉÖáååáåÖ=íÜÉ=áåëéÉÅíáçå=éêçÅÉëëK=qÜáë=áë=ÑçäJäçïÉÇ=Äó=~=îáëì~ä=íÜêÉ~Ç=áåëéÉÅíáçåK=^=ã~ÖåÉíáÅ=ÑáÉäÇI=ïÜçëÉÇáêÉÅíáçå=áë=~ééêçéêá~íÉ=Ñçê=íÜÉ=áåëéÉÅíáçå=ÄÉáåÖ=éÉêÑçêãÉÇI=áëíÜ~å=áåÇìÅÉÇ=áåíç=íÜÉ=íìÄìä~êK=^=Ä~íÜ=ïáíÜ=íÜÉ=ëìëéÉåÇÉÇ=ÑäìJçêÉëÅÉåí= áêçå= é~êíáÅäÉë= áë= íÜ~å= ~ééäáÉÇ= ~åÇ= íÜÉ= ~êÉ~= îáÉïÉÇìåÇÉê=~å=ìäíê~îáçäÉí=ä~ãéK=^åó=~åçã~äáÉë=ÑçìåÇ=ïáää=ÄÉ=éêçÄÉÇÑçê=ÇÉéíÜK=få=íÜÉ=ÉîÉåí=íÜÉ=~åçã~äó=áë=áåëìÑÑáÅáÉåí=Ñçê=êÉàÉÅíáçåçÑ=íÜÉ=ã~íÉêá~äI=íÜÉ=~åçã~äó=ïáää=ÄÉ=êÉãçîÉÇ=~åÇ=íÜÉ=~êÉ~=ÅçåJíçìêÉÇK=

24.- (Dye Pen Threaded) DYE PENETRANT

SEA FOR THREADED PIPE.

få=íÜÉ=ÉîÉåí=íÜ~í=íÜÉ=ã~íÉêá~ä=íç=ÄÉ=áåëéÉÅíÉÇ=áë=åçí=ÑÉêêçã~ÖJåÉíáÅ=~åÇ=~å=ìäíê~ëçåáÅ=ÉåÇ=~êÉ~= áåëéÉÅíáçå= áë= áå~ééêçéêá~íÉIíÜÉ= ìëÉ=çÑ= ÇóÉ=éÉåÉíê~åí= áåëéÉÅíáçå=ã~ó=ÄÉ= ÉãéäçóÉÇK= qÜÉã~íÉêá~ä=áë=Ñáêëí=ÅäÉ~åÉÇ=çîÉê=íÜÉ=ÉåíáêÉ=ëìêÑ~ÅÉ=íç=ÄÉ=áåëéÉÅíJÉÇK=^=ÑäìçêÉëÅÉåí=ÇóÉ=çÑ=íÜÉ=éêçéÉê=íóéÉ=Ñçê=íÜÉ=ã~íÉêá~ä=ïáää=ÄÉ~ééäáÉÇK= fåëéÉÅíáçå= ïáää= éêçÅÉÉÇ= ìåÇÉê= ìäíê~îáçäÉí= äáÖÜíK^åçã~äáÉë= ÑçìåÇ= íÜêçìÖÜ= íÜáë= áåëéÉÅíáçå=ïáää=ÄÉ=éêçÄÉÇ=~åÇêÉãçîÉÇ= áÑ= íÜÉáê= ÇÉéíÜ= áë= áåëìÑÑáÅáÉåí= Ñçê= íÜÉ= êÉàÉÅíáçå= çÑ= íÜÉã~íÉêá~äK=

25.- (Dye Pen) DYE PENETRANT SEA FOR

PLAIN END PIPE. få=íÜÉ=ÉîÉåí=íÜ~í=íÜÉ=ã~íÉêá~ä=íç=ÄÉ=áåëéÉÅíÉÇ=áë=åçí=ÑÉêêçã~ÖJåÉíáÅ=~åÇ=~å=ìäíê~ëçåáÅ=ÉåÇ=~êÉ~= áåëéÉÅíáçå= áë= áå~ééêçéêá~íÉIíÜÉ= ìëÉ=çÑ= ÇóÉ=éÉåÉíê~åí= áåëéÉÅíáçå=ã~ó=ÄÉ= ÉãéäçóÉÇK= qÜÉã~íÉêá~ä=áë=Ñáêëí=ÅäÉ~åÉÇ=çîÉê=íÜÉ=ÉåíáêÉ=ëìêÑ~ÅÉ=íç=ÄÉ=áåëéÉÅíJ

ÉÇK=^=ÑäìçêÉëÅÉåí=ÇóÉ=çÑ=íÜÉ=éêçéÉê=íóéÉ=Ñçê=íÜÉ=ã~íÉêá~ä=ïáää=ÄÉ~ééäáÉÇK= fåëéÉÅíáçå= ïáää= éêçÅÉÉÇ= ìåÇÉê= ìäíê~îáçäÉí= äáÖÜíK^åçã~äáÉë= ÑçìåÇ= íÜêçìÖÜ= íÜáë= áåëéÉÅíáçå=ïáää=ÄÉ=éêçÄÉÇ=~åÇêÉãçîÉÇ= áÑ= íÜÉáê= ÇÉéíÜ= áë= áåëìÑÑáÅáÉåí= Ñçê= íÜÉ= êÉàÉÅíáçå= çÑ= íÜÉã~íÉêá~äK

26.- (UT SEA-L-or-T) ULTRASONIC SPECIAL

END AREA INSPECTION, TEN INCHES (10")

EACH END NOT INCLUDING THREADS.

räíê~ëçåáÅ=ÉåÇ=~êÉ~=áåëéÉÅíáçå=áë=éÉêÑçêãÉÇ=çå=ã~íÉêá~ä=íÜ~í=áëÉáíÜÉê=åçåJÑÉêêçã~ÖåÉíáÅ=çê=ïÜÉêÉ=íÜÉ=ÅìëíçãÉê=áë=ÅçåÅÉêåÉÇ~Äçìí=áãéÉêÑÉÅíáçåë=íÜ~í=~êÉ=åçí=êÉ~Çáäó=ÇáëÅÉêå~ÄäÉ=ïáíÜ=çíÜÉêáåëéÉÅíáçå=ãÉíÜçÇë=EáKÉKI=ä~ãáå~íáçåëFK=qÜÉ=ÉåíáêÉ=ëìêÑ~ÅÉ=~êÉ~áë=ëÅ~ååÉÇI=Ñçê=íÉå==áåÅÜÉë=Ñêçã=íÜÉ=ÉåÇ=çÑ=éä~áå=ÉåÇ=éáéÉ=çêÑêçã=íÜÉ= ä~ëí= íÜêÉ~Ç=çå=íÜêÉ~ÇÉÇ=éáéÉI=ìëáåÖ=íÜÉ=~ééêçéêá~íÉíê~åëÇìÅÉê= ÅçìéäÉÇ= íç= ëÜÉ~ê= ï~îÉ= áåëíêìãÉåí~íáçåKfãéÉêÑÉÅíáçåë=ÑçìåÇ=ÇìêáåÖ=íÜÉ=áåëéÉÅíáçå=éêçÅÉëë=~êÉ=ÑìêíÜÉêéêçÄÉÇ= íç= Éî~äì~íÉ= íÜÉáê= ëÉîÉêáíóK= fÑ= íÜÉ= áãéÉêÑÉÅíáçå= áë= åçíëÉîÉêÉ= ÉåçìÖÜ= íç= Å~ìëÉ= êÉàÉÅíáçå= çÑ= íÜÉ= íìÄìä~ê= ~åÇ= áí= áëêÉãçî~ÄäÉI= áí= áë= íÜÉå= êÉãçîÉÇ= ~åÇ= íÜÉ= ~êÉ~= ÅçåíçìêÉÇKfåÅäìÇÉë=éêÉé~ê~íáçåK

27.- (C&V) CLEAN AND VISUAL THREAD

INSPECTION.

qÜêÉ~Çë=~åÇ=ëÜçìäÇÉêë=~êÉ=ÅäÉ~åÉÇ=~åÇ=îáëì~ääó=áåëéÉÅíÉÇ=ÑçêëÉêîáÅÉJáåÇìÅÉÇ=ÇÉÑÉÅíëI=ÅçêêçëáçåI=ãÉÅÜ~åáÅ~äI=çê=ã~åìÑ~ÅJíìêáåÖ= áêêÉÖìä~êáíáÉëK= qÜêÉ~Ç= ÅçãéçìåÇ= áë= êÉJ~ééäáÉÇI= ~åÇíÜêÉ~Ç=éêçíÉÅíçêë=êÉJáåëí~ääÉÇI=ïÜÉå=éêçîáÇÉÇK=

28.- (EA-PREP) END AREA PREPARATION

FOR PLAIN END AND THREADED PIPE.

cçê= íÜÉ= ÖêÉ~íÉëí= é~êí= çÑ= ~ää= íÜÉ= áåëéÉÅíáçåë= éÉêÑçêãÉÇ= ÄóqÉÅÜåáÅ~ä= fåÇìëíêáÉëI= fåÅKI= áí= áë=åÉÅÉëë~êó= íÜ~í= íÜÉ=éáéÉ= íç=ÄÉáåëéÉÅíÉÇ=ÄÉ=ÑêÉÉ=çÑ=~åó=ÑçêÉáÖå=ã~íÉêá~ä= íÜ~í=ÅçìäÇ=ÇÉÖê~ÇÉíÜÉ=áåëéÉÅíáçå=éêçÅÉëëK=qÜáë=áë=ÉëéÉÅá~ääó=íêìÉ=Ñçê=íÜÉ=ÉåÇ=~êÉ~áåëéÉÅíáçåK===qÜÉ=éêÉé~ê~íáçå=éêçÅÉëë=êÉèìáêÉë=íÜ~í=íÜÉ=éáéÉ=ÄÉÅäÉ~åÉÇ=íÜçêçìÖÜäó=Ñçê=~=Çáëí~åÅÉ=çÑ=íïÉåíóJÑçìê=áåÅÜÉë=EOQ?FÑêçã=É~ÅÜ=ÉåÇ=çÑ= íÜÉ=éáéÉ=çå=ÄçíÜ= íÜÉ=ÉñíÉêå~ä=~åÇ= áåíÉêå~äëìêÑ~ÅÉëK= cçê= íÜêÉ~ÇÉÇ= éáéÉI= íÜÉ= ÅçãéäÉíáçå= çÑ= íÜÉ= éêçÅÉëëêÉèìáêÉë=~=ëéÉÅáÑáÅ=ÅçãéçìåÇ=~ééäáÉÇ=íç=íÜÉ=íÜêÉ~Çë=~åÇ=íÜÉéêçíÉÅíçêë=êÉéä~ÅÉÇ=~åÇ=íáÖÜíÉåÉÇ=íç=íÜÉ=~ééêçéêá~íÉ=íçêèìÉK=

29.- (C&D) CLEAN AND REDOPE THREAD

qÜêÉ~Çë=~êÉ=ÅäÉ~åÉÇ=ëéÉÅáÑáÉÇ=ÅçãéçìåÇ=~ééäáÉÇ=~åÇ=íÜÉ=éêçJíÉÅíçêë=êÉéä~ÅÉÇ=~åÇ=íáÖÜíÉåÉÇ=íç=íÜÉ=~ééêçéêá~íÉ=íçêèìÉK=

30.- (API-TG) A.P.I. THREAD GAUGING.

fåÅäìÇÉë=íÜÉ=áåëéÉÅíáçå=çÑW=iÉ~Ç=d~ìÖÉ=qïáÅÉI=qÜêÉ~Ç=eÉáÖÜíI


OUR SERVICES

IN GOD WE TRUST


q~éÉêI=qêá~åÖäÉI=j~âÉJìéI=ÅçìéäáåÖ=äÉåÖíÜ=C=éáå=êìå=çìí=Ö~ìÖÉKEkç=ÅäÉ~åáåÖKF

31.- (MRP-TG) MRP THREAD GAUGING.

jom=Ö~ìÖáåÖ=áåÅäìÇÉë=~=ÅÜÉÅâ=çÑ=íÜÉ=éáíÅÜ=Çá~ãÉíÉê=~åÇ=îÉêJáÑáÅ~íáçå=çÑ=íÜÉ=çî~äáíó=çå=íÜêÉ~ÇÉÇ=éáéÉKNKF=pÉîÉê~ä=la=êÉ~ÇáåÖë=çÑ=Äçñ=C=éáå=íç=ÇÉíÉêãáåÉ=íÜÉ=ÜáÖÜÉëíêÉ~ÇáåÖ=C=íÜÉ=äçïÉëí=êÉ~ÇáåÖK=OKF=`~äÅìä~íáçå=çÑ=íÜÉ=ÇáÑÑÉêÉåÅÉÄÉíïÉÉå= íÜÉ= ÜáÖÜÉëí= êÉ~ÇáåÖ= C= íÜÉ= äçïÉëí= êÉ~ÇáåÖK= PKFj~áåí~áåáåÖ= íÜÉ= íçäÉê~åÅÉ= ïáíÜáå= íÜÉ= ëéÉÅáÑáÅ~íáçåëK= kl`ib^kfkdK

32.- (HT) HARDNESS TESTING.

rëáåÖ=ëéÉÅá~ä=áåëíêìãÉåíëI=ã~ÇÉ=Äó=oçÅâïÉää=çê=çíÜÉê=ã~åìJÑ~ÅíìêÉêëI=Ü~êÇåÉëë=íÉëíáåÖ=ïáää=ÄÉ=éÉêÑçêãÉÇI=~åÇ=íÜÉ=áåëíêìJãÉåí=ïáää=ÄÉ=ìëÉÇ=~ÅÅçêÇáåÖ=íç=ã~åìÑ~ÅíìêÉê=áåëíêìÅíáçåë=~åÇëéÉÅáÑáÅ~íáçåë=íç=ÇÉíÉêãáåÉ=íÜÉ=éêçéÉê=Ü~êÇåÉëë=çÑ=íÜÉ=ã~íÉJêá~äK

33.- (UT-Spot) ULTRASONIC WALLTHICKNESS

SPOT INSPECTION.

^ÅÅçêÇáåÖ= íç= ã~åìÑ~ÅíìêÉê= áåëíêìÅíáçåë= ~åÇ= ëéÉÅáÑáÅ~íáçåëIãÉÅÜ~åáÅ~äI= çê= ìäíê~ëçåáÅ= áåëíêìãÉåíë= çéÉê~íÉÇ= Äó= íê~áåÉÇéÉêëçååÉä=éÉêÑçêã=ï~ää=íÜáÅâåÉëë=péçíJ`ÜÉÅâI=~åÇ=êÉÅçêÇ=íÜÉêÉ~ÇáåÖëK

34.- (DP 013 Bi-Dry-SEA) DRY SEA BI-DIREC-

TIONAL TOOL JOINT INSPECTION.

j~ÖåÉíáÅ= ÑáÉäÇ= áë= áåÇìÅÉÇ= áåíç= íÜÉ= íççä= àçáåí= ìëáåÖ=ã~ÖåÉíáÅÉèìáéãÉåí= áå= ëÉé~ê~íÉ= ëí~ÖÉë= äçåÖáíìÇáå~ä= ~åÇ= íê~åëîÉêëÉÑáÉäÇëK= qÜÉ= íê~åëîÉêëÉ= ã~ÖåÉíáÅ= é~êíáÅäÉ= áåëéÉÅíáçå= áë= éÉêJÑçêãÉÇ=çå=íÜÉ=íÜêÉ~ÇëI=~åÇ=íÜÉ=äçåÖáíìÇáå~ä=áåëéÉÅíáçå=áë=éÉêJÑçêãÉÇ=çå=íÜÉ=íççä=àçáåí=laK

35.- (DP 015 Dry-S&C) DRY SEA SLIP & CHAIN

AREAS.

qÜÉ=la=ëìêÑ~ÅÉ=çÑ=íÜÉ=ëäáé=~åÇ=ÅÜ~áå=~êÉ~ë=çÑ=íÜÉ=éáéÉ=ïáää=ÄÉã~ÖåÉíáòÉÇ= Ñçê= ã~ÖåÉíáÅ= é~êíáÅäÉ= áåëéÉÅíáçå= çÑ= íê~åëîÉêëÉÇÉÑÉÅíëK

36.- (DP 018 Bi-Wet-TJ) WET FLUORESCENT

BI-DIRECTIONAL MAGNETIC PARTICLE TOOL

JOINT INSPECTION.

máå=íÜêÉ~Çë=C=_çñ=ïáää=ÄÉ=ã~ÖåÉíáòÉÇ=~åÇ=áåëéÉÅíÉÇ=Ñçê=íê~åëJîÉêëÉ=ÇÉÑÉÅíëI=máå=C=_çñ=Ñçê=la=äçåÖáíìÇáå~ä=ÇÉÑÉÅíëKqÜÉ=ã~ÖåÉíáÅ=ÑáÉäÇ=ïáää=ÄÉ=çêáÉåíÉÇ=íïáÅÉ=çåÉ=Ñçê= äçåÖáíìÇáå~ä~åÇ=~åçíÜÉê=Ñçê=íê~åëîÉêëÉ=ÇÉÑÉÅíëI=~åÇ=ïÉí=ÑäìçêÉëÅÉåí=ÑäìáÇ

ïáää=ÄÉ=~ééäáÉÇ=íç=äçÅ~íÉ=ÑáåÉ=ÇÉÑÉÅíëK

37.- (DP 020 Wet-S&C) WET FLUORESCENT

MAGNETIC PARTICLE INSPECTION OF SLIP &

CHAIN AREAS.

la=ëìêÑ~ÅÉ=ïáää= ÄÉ= áåëéÉÅíÉÇ= Ñçê= íê~åëîÉêëÉ=ÇÉÑÉÅíë= ìëáåÖ=~ã~ÖåÉíáÅ= ÑáÉäÇ= çêáÉåíÉÇ= Ñçê= íÜÉ= ~ééäáÅ~íáçåI= ~åÇ=ïÉí= ÑäìçêÉëJÅÉåí=ÑäìáÇ=ïáää=ÄÉ=~ééäáÉÇ=íç=äçÅ~íÉ=ÑáåÉ=ÇÉÑÉÅíëK

38.- (DP 21 UT-TJ) ULTRASONIC INSPECTION

OF TOOL JOINT WELDS.

räíê~ëçåáÅ= pÜÉ~ê= t~îÉ= áåëíêìãÉåí= ïáää= ÄÉ= Å~äáÄê~íÉÇI= ~åÇçéÉê~íÉÇ=Äó=~=íê~áåÉÇ=áåëéÉÅíçê=íç=ÇÉíÉÅí=íê~åëîÉêëÉ=ÇÉÑÉÅíë=áåíÜÉ=ïÉäÇ=~êÉ~=çÑ=íÜÉ=íççä=àçáåíK

39.- (DP 024) ULTRASONIC BI-DIRECTIONAL

END AREA SCAN OF SLIP & CHAIN AREAS.

rq=pÜÉ~ê=t~îÉ=áåëíêìãÉåí=ïáää=ÄÉ=Å~äáÄê~íÉÇI=~åÇ=çéÉê~íÉÇ=Äó~= íê~áåÉÇ= áåëéÉÅíçê= íç= ÇÉíÉÅí= íê~åëîÉêëÉ= ~åÇ= äçåÖáíìÇáå~äÇÉÑÉÅíë=áå=íÜÉ=ëäáé=C=ÅÜ~áå=~êÉ~ë=NO?=é~ëí=ìéëÉí=áåÅäìÇáåÖ=íççäàçáåí=ïÉäÇK==

40.- (DP 026 UT-SEA-TRI) ULTRASONIC TRI-

DIRECTIONAL END AREA SCAN OF SLIP AND

CHAIN AREAS.

rq=pÜÉ~ê=t~îÉ=áåëíêìãÉåí=ïáää=ÄÉ=Å~äáÄê~íÉÇI=~åÇ=çéÉê~íÉÇ=Äó~= íê~áåÉÇ= áåëéÉÅíçê= íç= ÇÉíÉÅí= íê~åëîÉêëÉ= ~åÇ= äçåÖáíìÇáå~äÇÉÑÉÅíë=áå=íÜÉ=ëäáé=C=ÅÜ~áå=~êÉ~ë=é~ëí=íÜÉ=íççä=àçáåí=ïÉäÇI=~åÇÅçãéêÉëëáçå=ï~îÉ=t~ää=qÜáÅâåÉëë=áåëíêìãÉåí=ïáää=áåëéÉÅí=íÜÉï~ää=íÜáÅâåÉëë=NO?=é~ëí=ìéJëÉí=~êÉ~=áåÅäìÇáåÖ=íççä=àçáåí=ïÉäÇK==

41.- (DP 027 TJ-OD) TOOL JOINT OD MEAS-

UREMENT.

qç=ÇÉíÉêãáåÉ=la=~í=íÜÉ=íççä=àçáåí=ëÜçìäÇÉê=ïáÇíÜK===få=çêÇÉê=íç~îçáÇ= Ççïå= ÜçäÉ= Ñ~áäìêÉI= íÜÉ= íççä= àçáåí= la= ïáää= ÄÉ= îÉêáÑáÉÇ~ÅÅçêÇáåÖ=íç=E^mf=omTd=pÉÅíáçå=NMF=

42.- (DP 028 TJ-FC) TOOL JOINT (Face) VISU-

AL EXAMINATION.

sáëì~ä=Éñ~ãáå~íáçå=çÑ=íççä=àçáåí=Ñ~ÅÉ=ÉñÅäìÇáåÖ=íÜêÉ~Çë=çê=íççäàçáåí=ÄçÇóI=íÜÉ=Ñ~ÅÉ=ïáää=ÄÉ=îáëì~ääó=Éñ~ãáåÉÇ=Ñçê=Ç~ã~ÖÉë=íÜ~íÅçìäÇ=Å~ìëÉ=ëÉ~ä=ï~ëÜçìíI=~åÇ=ÉîÉåíì~ääó= Ñ~áäìêÉI= áåëéÉÅíáçåéÉêÑçêãÉÇ=~ÅÅçêÇáåÖ=íç==E^mf=omTd=pÉÅíáçå=NMFK

43.- (DP 029 TJ-FC-WD) TOOL JOINT SHOUL-

DER (Face) WIDTH.


OUR SERVICES

IN GOD WE TRUST


jÉ~ëìêÉãÉåí=çÑ=íÜÉ=íççä=àçáåí=ëÜçìäÇÉê=ëÉ~äI=íç=ÇÉíÉêãáåÉ=áÑ=áíáë=ïáÇÉ=ÉåçìÖÜI=~åÇ=ïáíÜáå=íçäÉê~åÅÉ=Ñçê=ÑìêíÜÉê=ìëÉK

44.- (DP 030 WDG) TOOL JOINT WELDING

DATE//GRADE MARK EXAMINATION.

mÉêÑçêãÉÇ=çå=éáå=ÉåÇ=çåäó=~ÅÅçêÇáåÖ= íç= E^mf=omTd=pÉÅíáçåNMF

45.- (DP 032 C&V) TOOL JOINT CLEAN &

VISUAL EXAMINATION.

qÜêÉ~Çë=~åÇ=ëÜçìäÇÉêë=~êÉ=ÅäÉ~åÉÇ=~åÇ=îáëì~ääó=áåëéÉÅíÉÇ=ÑçêëÉêîáÅÉJáåÇìÅÉÇ=ÇÉÑÉÅíëI=ÅçêêçëáçåI=ãÉÅÜ~åáÅ~äI=çê===ã~åìÑ~ÅJíìêáåÖ= áêêÉÖìä~êáíáÉëI= íÜêÉ~Ç= ÅçãéçìåÇ= áë= êÉJ~ééäáÉÇI= ~åÇíÜêÉ~Ç=éêçíÉÅíçêë=êÉJáåëí~ääÉÇI=ïÜÉå=éêçîáÇÉÇK

46.- (DP 033 TJ-PS) TOOL JOINT PIN

STRETCH INSPECTION.

qÜÉ=àçáåí=éáå= áë=ÅäÉ~åÉÇ=~åÇ=íÜêÉ~Çë=~êÉ=îáëì~ääó=îÉêáÑáÉÇ=íç=~Ü~åÇ=ÜÉäÇ=ãÉÅÜ~åáÅ~ä= íÜêÉ~Ç=éêçÑáäÉ= äÉ~Ç=Ö~ìÖÉI= íÜÉ= áåëéÉÅJíáçå=éêçÅÉÇìêÉ=éÉêÑçêãÉÇ=Äó=íê~áåÉÇ=áåëéÉÅíçêK

47.- (DP 034 TJ-B-SWL) TOOL JOINT BOX

SWELLING AND MEASUREMENT & COUNTER

BORE Qc.

^= íê~áåÉÇ= áåëéÉÅíçê=ïáää= í~âÉ=ãÉ~ëìêÉãÉåí=~Åêçëë= íÜÉ= áåëáÇÉÄçêÉ= çÑ= íÜÉ= Äçñ= ~åÇ= Åçãé~êÉÇ= íç= ^mf= péÉÅK= T= Ñçê= éçëëáÄäÉëïÉääáåÖ=áåÇáÅ~íáçåK=

48.- (DP 036 RSC-DIM) RSC DIMENSIONAL

INSPECTION OF CONNECTIONS.

^= íê~áåÉÇ= áåëéÉÅíçê=ïáää= îáëì~ääó= áåëéÉÅí= É~ÅÜ= ÉåÇ= ~åÇ= îÉêáÑóíççä=àçáåí=la=C=faI=íççä=àçáåí=äÉåÖíÜI=ÄÉîÉä=Çá~ãÉíÉêI=éáå=ÅóäáåJÇÉê= Çá~ãÉíÉêI= íÜêÉ~Ç= äÉåÖíÜI= íÜêÉ~Ç= éêçÑáäÉ= ~åÇ= Ü~êÇ= Ä~åÇãÉ~ëìêÉãÉåíëK=aáãÉåëáçåë=íç=ÄÉ===êÉÅçêÇÉÇ=~ÅÅçêÇáåÖ=íç=^mfomTd= pÉÅíáçå= NMK= açÉë= kçí= fåÅäìÇÉI= `äÉ~åáåÖI= _ìÑÑáåÖIpçäîÉåíI=`çãéçìåÇI=~åÇ=båîáêçåãÉåí~äK

49.- (DP 037 RSC-RFC) REFACING OF ROTARY

SHOULDER CONNECTIONS.

qÉÅÜåáÅ~ä= fåÇìëíêáÉëI= fåÅKI= éêçîáÇÉë= íê~áåÉÇ= áåëéÉÅíçêë= ïáíÜp~åÇ=m~éÉê= çê= ä~íÜÉ= íóéÉ= êÉJÑ~ÅÉê= Ñçê= ëáåÖäÉ= ëÜçìäÇÉê= ÅçåJåÉÅíáçåK= mêçéêáÉí~êó= Çì~ä= ëÜçìäÇÉê= ÅçååÉÅíáçå= êÉJÑ~ÅÉê= áë~î~áä~ÄäÉK

50.- (DP 038 M-STP) METAL STAMPING.

jÉí~ä=ëí~ãéáåÖ=áåÅäìÇÉë=íÜÉ=åìãÄÉêáåÖ=çÑ=É~ÅÜ=àçáåíI=~åÇ=íÜÉã~êâáåÖ= çÑ= íÜÉ= áåëéÉÅíáçå= Åçãé~åó= áåáíá~äëI=ãçåíÜ= ~åÇ= óÉ~ê

éáéÉ=áåëéÉÅíÉÇK

51.- (DP 040 DRY-SEA) HEAVYWEIGHT DRILL

PIPE INSPECTION DRY MAGNETIC PARTICLE

INSPECTION FOR END AREAS.

aêó= ã~ÖåÉíáÅ= é~êíáÅäÉë= ~ééäáÉÇ= ~ÅÅçêÇáåÖ= íç= qÉÅÜåáÅ~äfåÇìëíêáÉëI=fåÅK=ëéÉÅáÑáÅ~íáçåë=fåëéÉÅíáçå=mêçÅÉÇìêÉë=Ñçê=båÇ^êÉ~ë=~êÉ=éÉêÑçêãÉÇ=çå=ÑÉêêçã~ÖåÉíáÅ=ã~íÉêá~äK=qÜÉ=~êÉ~=íçÄÉ= áåëéÉÅíÉÇ=ãìëí=ÄÉ=íÜçêçìÖÜäó=ÅäÉ~åÉÇ=ÄÉÑçêÉ=ÄÉÖáååáåÖíÜÉ= áåëéÉÅíáçå= éêçÅÉëëK= ^ÑíÉê= ~= îáëì~ä= íÜêÉ~Ç= áåëéÉÅíáçå= áëéÉêÑçêãÉÇI=~=a`=ã~ÖåÉíáÅ=ÑáÉäÇI=éêçéÉêäó=çêáÉåíÉÇ=~ÅÅçêÇáåÖíç=íÜÉ=áåëéÉÅíáçå=íç=ÄÉ=éÉêÑçêãÉÇI=áë=áåÇìÅÉÇ=áåíç=íÜÉ=éáéÉKaêó=áêçå=éçïÇÉê=áë=~ééäáÉÇ=íç=íÜÉ=~êÉ~K=^åó=~ÅÅìãìä~íáçå=çÑéçïÇÉê=~í=íÜÉ=éçáåí=çÑ=Ñäìñ=äÉ~â~ÖÉI=Å~ìëÉÇ=Äó=~å=~åçã~äóIïáää=ÄÉ=éêçÄÉÇK=pÜçìäÇ=íÜÉ=~åçã~äó=ÄÉ=áåëìÑÑáÅáÉåí=Ñçê=êÉàÉÅJíáçå=çÑ=íÜÉ=ã~íÉêá~äI=íÜÉ=áãéÉêÑÉÅíáçå=ïáää=ÄÉ=êÉãçîÉÇ=~åÇ=íÜÉ~êÉ~=ÅçåíçìêÉÇK

52.- (DP 041 HWDP-WET- SEA) HEAVYWEIGHT

DRILL PIPE TOOL JOINT BLACKLIGHT

INSPECTION.

fåëéÉÅíáçå= áåÅäìÇÉë= íÜÉ= îáëì~ä= Éñ~ãáå~íáçå= ~åÇ= ÇáãÉåëáçå~äáåëéÉÅíáçå=çÑ=íÜÉ=ÅçååÉÅíáçåI=Ää~ÅâäáÖÜí=ÅçååÉÅíáçå=áåëéÉÅíáçå~ÅÅçêÇáåÖ=íç=`~íÉÖçêó=PJRK=qÜáë=áåëéÉÅíáçå=éêçÅÉëë=áåÅäìÇÉëIìëáåÖ=ÑáåÉäó=ÖêçìåÇ=áêçå=éçïÇÉê=ëìëéÉåÇÉÇ=áå=~=ÑäìáÇI=áë=ìëÉÇíç= áåëéÉÅí= íÜÉ=ÉåÇë=çÑ= ÑÉêêçã~ÖåÉíáÅ= íìÄìä~êK=qÜÉ=~êÉ~= íç=ÄÉáåëéÉÅíÉÇ=ãìëí=ÄÉ= íÜçêçìÖÜäó= ÅäÉ~åÉÇ=ÄÉÑçêÉ=ÄÉÖáååáåÖ= íÜÉáåëéÉÅíáçå=éêçÅÉëëK=qÜáë=áë=ÑçääçïÉÇ=Äó=~=îáëì~ä=íÜêÉ~Ç=áåëéÉÅJíáçåK=^=ã~ÖåÉíáÅ=ÑáÉäÇI=ïÜçëÉ=çêáÉåí~íáçå=áë=~ééêçéêá~íÉ=Ñçê=íÜÉáåëéÉÅíáçå=ÄÉáåÖ=éÉêÑçêãÉÇI=áë=íÜ~å=áåÇìÅÉÇ=áåíç=íÜÉ=áåëéÉÅíJÉÇ=íççäK===^=Ä~íÜ=ïáíÜ=íÜÉ=ëìëéÉåÇÉÇ=ÑäìçêÉëÅÉåí=áêçå=é~êíáÅäÉëáë=íÜ~å=~ééäáÉÇ=~åÇ=íÜÉ=~êÉ~=îáÉïÉÇ=ìåÇÉê=~å=ìäíê~îáçäÉí=ä~ãéK^åó=~åçã~äáÉë=ÑçìåÇ=ïáää=ÄÉ=éêçÄÉÇ=Ñçê=ÇÉéíÜK=få=íÜÉ=ÉîÉåí=íÜÉ~åçã~äó=áë=áåëìÑÑáÅáÉåí=Ñçê=êÉàÉÅíáçå=çÑ=íÜÉ=ã~íÉêá~äI=íÜÉ=~åçãJ~äó=áÑ=~ÅÅÉëëáÄäÉ=ïáää=ÄÉ=êÉãçîÉÇ=~åÇ=íÜÉ=~êÉ~=ÅçåíçìêÉÇK=

53.- (DP 042 FL-DRY- SEA&MOI) DRILL COL-

LARS, KELLYS AND STABILIZERS, FULL

LENGTH DRY MAGNETIC PARTICLE INSPEC-

TION & MECHANICAL OPTICAL INSPECTION.

aêó=ã~ÖåÉíáÅ=é~êíáÅäÉë=~ÅÅçêÇáåÖ=íç=qÉÅÜåáÅ~ä=fåÇìëíêáÉëI=fåÅKëéÉÅáÑáÅ~íáçåë=fåëéÉÅíáçå=mêçÅÉÇìêÉë=Ñçê=cìää=iÉåÖíÜ=ÉñÅäìÇáåÖÉåÇ=~êÉ~ë=áë=éÉêÑçêãÉÇ=çå=ÑÉêêçã~ÖåÉíáÅ=ã~íÉêá~äK=qÜÉ=çìíëáÇÉëìêÑ~ÅÉ= çÑ= íÜÉ= íççä= áë= ÅäÉ~åÉÇ= ~åÇ= îáëì~ääó= Éñ~ãáåÉÇ= ÑçêÇÉÑÉÅíëK===qÜÉ=áåëáÇÉ=ëìêÑ~ÅÉ=çÑ=íÜÉ=íççä=áë=Éñ~ãáåÉÇ=ïáíÜ=éêçJéêáÉí~êó= Å~ãÉê~= çê= ëéÉÅá~ä= çéíáÅ~ä= áåëíêìãÉåí= Ñçê= îáëáÄäÉÇÉÑÉÅíëK= = qÜÉ= ~êÉ~= íç= ÄÉ= áåëéÉÅíÉÇ= ãìëí= ÄÉ= íÜçêçìÖÜäóÅäÉ~åÉÇ=ÄÉÑçêÉ=ÄÉÖáååáåÖ=íÜÉ=áåëéÉÅíáçå=éêçÅÉëëK=^ÑíÉê=~=îáëìJ


OUR SERVICES

IN GOD WE TRUST


~ä=íÜêÉ~Ç=áåëéÉÅíáçå=áë=éÉêÑçêãÉÇI=~=a`=ã~ÖåÉíáÅ=ÑáÉäÇI=éêçéJÉêäó=çêáÉåíÉÇ=~ÅÅçêÇáåÖ=íç=íÜÉ=áåëéÉÅíáçå=íç=ÄÉ=éÉêÑçêãÉÇI= áëáåÇìÅÉÇ=áåíç=íÜÉ=éáéÉK=aêó=áêçå=éçïÇÉê=áë=~ééäáÉÇ=íç=íÜÉ=~êÉ~K^åó= ~ÅÅìãìä~íáçå= çÑ= éçïÇÉê= ~í= íÜÉ= éçáåí= çÑ= Ñäìñ= äÉ~â~ÖÉIÅ~ìëÉÇ=Äó=~å=~åçã~äóI=ïáää=ÄÉ=éêçÄÉÇK=pÜçìäÇ=íÜÉ=~åçã~äó=ÄÉáåëìÑÑáÅáÉåí= Ñçê= êÉàÉÅíáçå= çÑ= íÜÉ= ã~íÉêá~äI= íÜÉ= áãéÉêÑÉÅíáçå= áÑ~ÅÅÉëëáÄäÉ=ïáää=ÄÉ=êÉãçîÉÇ=~åÇ=íÜÉ=~êÉ~=ÅçåíçìêÉÇK

54.- (DP 043 FL-MOI + MPI & SEA) DRILL COL-

LARS, KELLY AND STABILIZERS, FULL

LENGTH MECHANICAL OPTICAL & END AREA

INSPECTION.

qÜÉ=çìíëáÇÉ=ëìêÑ~ÅÉ=çÑ=íÜÉ=íççä=áë=ÅäÉ~åÉÇ=~åÇ=îáëì~ääó=Éñ~ãJáåÉÇ= Ñçê= ÇÉÑÉÅíëK= qÜÉ= áåëáÇÉ= ëìêÑ~ÅÉ=çÑ= íÜÉ= íççä= áë= Éñ~ãáåÉÇïáíÜ= éêçéêáÉí~êó= Å~ãÉê~= çê= çéíáÅ~ä= áåëíêìãÉåí= Ñçê= îáëáÄäÉÇÉÑÉÅíëI=íÜÉ=ÉåÇë=~êÉ=áåëéÉÅíÉÇ=~ë=ÇÉëÅêáÄÉÇ=áå=aêó=j~ÖåÉíáÅm~êíáÅäÉ=båÇ=^êÉ~=fåëéÉÅíáçåK==

55.- (DP 044 C&V - RSCD3 –WET – SEA) DRILL

COLLARS AND SUBS.

sáëì~ä=ÅçååÉÅíáçåI=ÇáãÉåëáçå~ä=PI=~åÇ=Ää~ÅâäáÖÜí=áåëéÉÅíáçå=çÑÅçååÉÅíáçåë= `~íÉÖçêó= PJRI= ~ë= ÇÉëÅêáÄÉÇ= áå= ëÉêîáÅÉ= äáåÉ= PNÅçÇÉ=amMNUK

56.- (DP 045 MOI + MPI) CORE BARRELS

MECHANICAL OPTICAL & MAGNETIC PARTI-

CLE INSPECTION.

aêó= ã~ÖåÉíáÅ= é~êíáÅäÉë= ~ééäáÉÇ= ~ÅÅçêÇáåÖ= íç= qÉÅÜåáÅ~äfåÇìëíêáÉëI= fåÅK= ëéÉÅáÑáÅ~íáçåë= áåëéÉÅíáçå= éêçÅÉÇìêÉë= Ñçê= ÑìäääÉåÖíÜ= ÉñÅäìÇáåÖ= ÉåÇ= ~êÉ~ë= áë= éÉêÑçêãÉÇ= çå= ÑÉêêçã~ÖåÉíáÅã~íÉêá~äK=qÜÉ=çìíëáÇÉ=ëìêÑ~ÅÉ=çÑ=íÜÉ=íççä=áë=ÅäÉ~åÉÇ=~åÇ=îáëì~ääó=Éñ~ãJáåÉÇ= Ñçê= ÇÉÑÉÅíëK= qÜÉ= áåëáÇÉ= ëìêÑ~ÅÉ=çÑ= íÜÉ= íççä= áë= Éñ~ãáåÉÇïáíÜ=éêçéêáÉí~êó=Å~ãÉê~=çê=ëéÉÅá~ä=çéíáÅ~ä=áåëíêìãÉåí=Ñçê=îáëáJÄäÉ= ÇÉÑÉÅíëK= qÜÉ= ~êÉ~= íç= ÄÉ= áåëéÉÅíÉÇ= ãìëí= ÄÉ= íÜçêçìÖÜäóÅäÉ~åÉÇ=ÄÉÑçêÉ=ÄÉÖáååáåÖ=íÜÉ=áåëéÉÅíáçå=éêçÅÉëëK=^ÑíÉê=~=îáëìJ~ä=íÜêÉ~Ç=áåëéÉÅíáçå=áë=éÉêÑçêãÉÇI=~=aK`K=ã~ÖåÉíáÅ=ÑáÉäÇ=éêçéJÉêäó=çêáÉåíÉÇ=~ÅÅçêÇáåÖ=íç=íÜÉ=áåëéÉÅíáçå=ÄÉáåÖ=éÉêÑçêãÉÇI=áëáåÇìÅÉÇ=áåíç=íÜÉ=éáéÉK=aêó=áêçå=éçïÇÉê=áë=~ééäáÉÇ=íç=íÜÉ=~êÉ~K

^åó= ~ÅÅìãìä~íáçå= çÑ= éçïÇÉê= ~í= íÜÉ= éçáåí= çÑ= Ñäìñ= äÉ~â~ÖÉIÅ~ìëÉÇ=Äó=~å=~åçã~äóI=ïáää=ÄÉ=éêçÄÉÇK=pÜçìäÇ=íÜÉ=~åçã~äó=ÄÉáåëìÑÑáÅáÉåí= Ñçê= êÉàÉÅíáçå= çÑ= íÜÉ= ã~íÉêá~äI= íÜÉ= áãéÉêÑÉÅíáçå= áÑ~ÅÅÉëëáÄäÉ=ïáää=ÄÉ=êÉãçîÉÇ=~åÇ=íÜÉ=~êÉ~=ÅçåíçìêÉÇK

57.- (DP 046 MOI+MPI) DRILL BIT INSPEC-

TION, MECHANICAL OPTICAL & MAGNETIC

PARTICLE INSPECTION.

p~ãÉ=~ë=áå=kçK=RP=jlfHjmf=éêçÅÉÇìêÉ=ïáää=ÄÉ=~ééäáÉÇK=p~ãÉ~ë=áå=kçK=RP=jlfHjmf=éêçÅÉÇìêÉ=ïáää=ÄÉ=~ééäáÉÇK=tÜ~í=áë=éêÉJëÉåíÉÇ=ÜÉêÉ=áë=~=ÖÉåÉê~äáòÉÇ=Ñçêã~íK=fí=ëÜçìäÇ=ÄÉ=åçíÉÇ=íÜ~í=ïÉ~êÉ= ~ÄäÉ= íç= ÇÉîÉäçé= ëéÉÅá~ä= áåëéÉÅíáçå= ëóëíÉãë= Ñçê= ëéÉÅá~äåÉÉÇë= ~åÇLçê= ëéÉÅá~ä= éêçàÉÅíëI= ÇÉéÉåÇáåÖ= çå= çìê= ÅäáÉåíDëìåáèìÉ=êÉèìáêÉãÉåíë=^ë=~å=çêáÖáå~ä=ÉèìáéãÉåí=ã~åìÑ~ÅíìêÉêI=áíáë=çìê=éçäáÅó= íç=ìëÉ=~ë=ã~åó=çÑÑJíÜÉJëÜÉäÑ= áíÉãë=~ë=éçëëáÄäÉKoÉÇìÅáåÖ= çìê= ã~åìÑ~ÅíìêáåÖ= Åçëíë= ~åÇ= éêçîáÇáåÖ= ëáãéäáÑáÉÇã~áåíÉå~åÅÉ==~åÇ==êÉé~áê==Ñçê==çìê=ÅäáÉåíë=áë=çåÉ=çÑ=çìê=ã~àçêÖç~äëK=^å=~ÇÇáíáçå~ä=ÄÉåÉÑáí=íç=íÜáë=~ééêç~ÅÜ=áë=íÜÉ=ÇçÅìãÉåJí~íáçå=éêçîáÇÉÇ=Äó=íÜÉ=çêáÖáå~ä=ã~åìÑ~ÅíìêÉê=çÑ=áåÇáîáÇì~ä=ÅçãJéçåÉåíëKe~îáåÖ=íÜÉ=ÄÉëí=áåëéÉÅíáçå=ëóëíÉã=~î~áä~ÄäÉI=áë=áå=áíëÉäÑI=åçí=íÜÉëçäÉ=~åëïÉê=áå=çÄí~áåáåÖ=~=èì~äáíó=áåëéÉÅíáçåK=tÉ=ÑÉÉä=íÜ~í==íÜÉáåëéÉÅíáçå==ëóëíÉã==áë==çåäó==~å=ÉñíÉåëáçå=çÑ=íÜÉ=éÉêëçå=ïÜç=áëÅçåÇìÅíáåÖ=~åÇ=ïÜç=áë=ìäíáã~íÉäó=êÉëéçåëáÄäÉ=Ñçê=íÜÉ=èì~äáíó=çÑíÜÉ=áåëéÉÅíáçåK=cçê=íÜáë=êÉ~ëçå=~åÇ=~ë=é~êí=çÑ=íÜÉ=íçí~ä=é~ÅâJ~ÖÉI=ïÉ=Ü~îÉ=áåÅçêéçê~íÉÇ=~å=ÉñíÉåëáîÉ=íê~áåáåÖ=éêçÖê~ãK=qÜáëáåëìêÉë=íÜÉ=ìäíáã~íÉ=ëìÅÅÉëë=çÑ==íÜÉ==ÉåíáêÉ==éêçÖê~ãK==`ÉêíáÑáÉÇéÉêëçååÉä==ïáää==ÅçåÇìÅí==íÜÉ=íê~áåáåÖ==~äçåÖ==ïáíÜ==~å==áåëéÉÅJíáçå==ëìéÉêîáëçê==ïÜç==áë==ïÉää=~Åèì~áåíÉÇ=ïáíÜ=íÜÉ=çéÉê~íáçå=çÑíÜÉ=áåëéÉÅíáçå=ëóëíÉãKtÉ ïáää ~äï~óë ÄÉ ~î~áä~ÄäÉI íç íÜÉ ÄÉëí çÑ çìê ~ÄáäáíóI íç éêçJîáÇÉ çåÖçáåÖ ëìééçêíI íê~áåáåÖI éÉêëçååÉäI íÉÅÜåçäçÖáÅ~äáãéêçîÉãÉåíI=~åÇLçê=ÜÉäé=áå=~åó=~êÉ~=ïÜÉêÉ=áí=áë=ÑÉäí=ïÉ=ÅçìäÇÄÉ=çÑ=~ëëáëí~åÅÉK


TECHNICAL

INFORMATION

IN GOD WE TRUST


ET-Series Ultrasonic Inspection

qÜÉ=bqJpbofbp=riqo^plkf`=fkpmb`qflk=pvpqbj=áë=~=ÅìäJãáå~íáçå=çÑ=óÉ~êë=çÑ= íêá~ä=~åÇ=ÉêêçêK=páåÅÉ=NVURI=ïÜÉå=íÜÉ=ÑáêëíbqJpbofbp=pvpqbj=ï~ë=ÇÉîÉäçéÉÇ=~åÇ=éä~ÅÉÇ=áåíç=çéÉê~íáçåIã~åó= áãéêçîÉãÉåíë= Ü~îÉ= ÄÉÉå=ã~ÇÉ= íç= áåÅêÉ~ëÉ= ëéÉÉÇ= ~åÇáãéêçîÉ=~ÅÅìê~Åó=~åÇ=êÉäá~ÄáäáíóK=tÉ=ÄÉäáÉîÉ=çìê=ÅìêêÉåí=ëí~íÉJçÑíÜÉJ~êí= bqJpbofbp= riqo^plkf`= fkpmb`qflk= pvpqbj= åçíçåäó= ãÉÉíë= íçÇ~óDë= áåëéÉÅíáçå= åÉÉÇëI= Äìí= íÜçëÉ= çÑ= óÉ~êë= íçÅçãÉK

tÜ~í= áë= éêÉëÉåíÉÇ= ÜÉêÉ= áë= ~= ÖÉåÉê~äáòÉÇ= Ñçêã~íK= fíëÜçìäÇ= ÄÉ= åçíÉÇ= íÜ~í=ïÉ= ~êÉ= ~ÄäÉ= íç= ÇÉîÉäçé= ëéÉÅá~äáåëéÉÅíáçå= ëóëíÉãë= Ñçê= ëéÉÅá~ä= åÉÉÇë= ~åÇLçê= ëéÉÅá~äéêçàÉÅíëI= ÇÉéÉåÇáåÖ= çå= çìê= ÅäáÉåíDë= ìåáèìÉ= êÉèìáêÉJãÉåíëK=

^ë=~å=çêáÖáå~ä=ÉèìáéãÉåí=ã~åìÑ~ÅíìêÉêI=áí=áë=çìê=éçäáÅóíç= ìëÉ= ~ë= ã~åó= çÑÑJíÜÉJëÜÉäÑ= áíÉãë= ~ë= éçëëáÄäÉKoÉÇìÅáåÖ=çìê=ã~åìÑ~ÅíìêáåÖ=Åçëíë=~åÇ=éêçîáÇáåÖ=ëáãJéäáÑáÉÇ=ã~áåíÉå~åÅÉ=~åÇ=êÉé~áê=Ñçê=çìê=ÅäáÉåíë=áë=çåÉ=çÑçìê=ã~àçê=Öç~äëK=^å=~ÇÇáíáçå~ä=ÄÉåÉÑáí=íç=íÜáë=~ééêç~ÅÜáë= íÜÉ= ÇçÅìãÉåí~íáçå= éêçîáÇÉÇ= Äó= íÜÉ= çêáÖáå~ä=ã~åìJÑ~ÅíìêÉê=çÑ=áåÇáîáÇì~ä=ÅçãéçåÉåíëK=

e~îáåÖ= íÜÉ= ÄÉëí= áåëéÉÅíáçå= ëóëíÉã= ~î~áä~ÄäÉI= áë= áåáíëÉäÑI=åçí=íÜÉ=ëçäÉ=~åëïÉê=áå=çÄí~áåáåÖ=~=èì~äáíó=áåëéÉÅJíáçåK= tÉ= ÑÉÉä= íÜ~í= íÜÉ= áåëéÉÅíáçå= ëóëíÉã= áë= çåäó= ~åÉñíÉåëáçå=çÑ=íÜÉ=éÉêëçå=ïÜç=áë=ÅçåÇìÅíáåÖ=~åÇ=ïÜç=áë

ìäíáã~íÉäó=êÉëéçåëáÄäÉ=Ñçê=íÜÉ=èì~äáíó=çÑ=íÜÉ=áåëéÉÅíáçåK=cçê=íÜáëêÉ~ëçå=~åÇ=~ë=é~êí=çÑ=íÜÉ=íçí~ä=é~Åâ~ÖÉI=ïÉ=Ü~îÉ=áåÅçêéçê~íÉÇ~å= ÉñíÉåëáîÉ= íê~áåáåÖ= éêçÖê~ãK= qÜáë= áåëìêÉë= íÜÉ= ìäíáã~íÉ= ëìÅJÅÉëë=çÑ=íÜÉ=ÉåíáêÉ=éêçÖê~ãK=`ÉêíáÑáÉÇ=éÉêëçååÉä=ïáää=ÅçåÇìÅí=íÜÉíê~áåáåÖ= ~äçåÖ= ïáíÜ= ~å= áåëéÉÅíáçå= ëìéÉêîáëçê= ïÜç= áë= ïÉää~Åèì~áåíÉÇ=ïáíÜ=íÜÉ=çéÉê~íáçå=çÑ=íÜÉ=áåëéÉÅíáçå=ëóëíÉãK=

tÉ=ïáää=~äï~óë=ÄÉ=~î~áä~ÄäÉI=íç=íÜÉ=ÄÉëí=çÑ=çìê=~ÄáäáíóI=íç=éêçîáÇÉçåÖçáåÖ= ëìééçêíI= íê~áåáåÖI= éÉêëçååÉäI= íÉÅÜåçäçÖáÅ~ä= áãéêçîÉJãÉåíëI=~åÇLçê=ÜÉäé= áå=~åó=~êÉ~=ïÜÉêÉ= áí= áë= ÑÉäí=ïÉ=ÅçìäÇ=ÄÉ=çÑ~ëëáëí~åÅÉK=


TECHNICAL

INFORMATION

IN GOD WE TRUST


General Overview

NKN pfwbI=ibkdqeI=^ka=tîi=qef`hkbppNKO `lsbo^dbNKP abqb`q̂ _fifqvNKQ molar`qflk=pmbbapNKR riqo^plkf`=qbpq=fkpqorjbkqpNKS qo^kpar`bopNKT qo^kpar`bo=ebâ=^ppbj_ivNKU pfdkî=jlkfqlofkdNKV pvpqbj=`lkqoliNKNM lmqflkî=afdfq̂ i=`ljmrqbo=bke^k`bjbkq=

m^`h^dbNKNN sfplkf`»=sfoqrî=fj^dfkd=fkpmb`qflk

1.1 SIZE, LENGTH, AND WALL THICKNESS

qÉÅÜåáÅ~ä= fåÇìëíêáÉë= fåÅKI= bqJpbofbp= räíê~ëçåáÅ= fåëéÉÅíáçåpóëíÉãë=~êÉ=ÇÉëáÖåÉÇ=íç=áåëéÉÅí=çáäÑáÉäÇ=íìÄìä~êëI=^pqjI=~åÇçíÜÉê=íìÄìä~êë=ê~åÖáåÖ=áå=ëáòÉë=Ñêçã=NKVV=áåÅÜ=íç=OQ=áåÅÜ=laIïáíÜ=ÅçìéäáåÖëK=iÉåÖíÜ=Å~é~ÄáäáíáÉë=ê~åÖÉ=Ñêçã=R=ÑÉÉí=íÜêçìÖÜSM=ÑÉÉíK=t~ää=íÜáÅâåÉëë=ãáåáãìãë=~åÇ=ã~ñáãìãë=~êÉ=~=ÑìåÅJíáçå=çÑ=íê~åëÇìÅÉê=ÑêÉèìÉåÅóI=ëÜÉ~ê=ï~îÉ=~åÖäÉI=~åÇ=éáéÉ=çìíJëáÇÉ= Çá~ãÉíÉêK=táíÜ= íÜÉ= bqJpbofbp= áåëéÉÅíáçå= ÜÉ~Ç= ÇÉëáÖåIíê~åëÇìÅÉêë= ~êÉ= É~ëáäó= áåíÉêÅÜ~åÖÉÇ= ïáíÜ= ÑÉï= äáãáí~íáçåë= çåéáéÉ= ëáòÉI= ëÜÉ~ê=ï~îÉ= ~åÖäÉ= ~åÇ= íê~åëÇìÅÉê= ÑêÉèìÉåÅóK= qÜáëÇÉëáÖå=~ääçïë=èìáÅâ=ÅÜ~åÖÉçîÉêë=íç=~ÅÅçããçÇ~íÉ=~=î~êáÉíó=çÑï~ää=íÜáÅâåÉëëÛK

1.2 COVERAGE

få= íÜÉ=êÉÅçããÉåÇÉÇ=ëí~åÇ~êÇ=?cìää=pÅ~å?=ÅçåÑáÖìê~íáçåI= íÜÉíê~åëÇìÅÉêë= ~êÉ= çêáÉåíÉÇ= íç= éêçîáÇÉ= PSMl Ñä~ï= ÇÉíÉÅí~ÄáäáíóïáíÜáå=NQ= EÑçìêíÉÉåF= áåÅÜÉë=Ñêçã=íÜÉ=ÉåÇë=~åÇ=ï~ää= íÜáÅâåÉëëãÉ~ëìêÉãÉåíë=ïáíÜáå=O=EíïçF=áåÅÜÉë=çÑ=íÜÉ=éáéÉ=ÉåÇëK=s~êá~ÄäÉ

ëéÉÉÇ= Åçåíêçäë= Ñçê= éáéÉ= êçí~íáçå= ~åÇ= Ö~åíêó= íê~îÉä= ~ääçï= ÑçêÉ~ëó=~åÇ=~ÅÅìê~íÉ=Åçåíêçä=çÑ=íÜÉ=áåëéÉÅíáçå=ÜÉäáñK=

1.3. DETECTABILITY

qê~åëÇìÅÉêë=Å~å=ÄÉ=ëÉäÉÅíÉÇ= íç=éêçÇìÅÉ=î~êáçìë=ÇÉÖêÉÉë=çÑÇÉíÉÅí~Äáäáíó=~åÇ=ëÉåëáíáîáíóK=táíÜ=éêçéÉê=íê~åëÇìÅÉê=ëÉäÉÅíáçåI~ää= bqJpbofbp= ëóëíÉãë= ~êÉ= Å~é~ÄäÉ= çÑ= êÉéÉ~íÉÇäó= ÇÉíÉÅíáåÖëã~ää= êÉÑäÉÅíçêë= çå= ÄçíÜ= íÜÉ= fKaK= ~åÇ= lKaK= ëìêÑ~ÅÉëK= qÜÉëÉëã~ää= êÉÑäÉÅíçêë= áåÅäìÇÉ=NLU?=Çá~ãÉíÉê=RB=êçìåÇ=Äçííçã=éáíë~åÇ=NLQ?=ñ=MKMNM?=ñ=R=B=baj=åçíÅÜÉë=~í=~åó=çêáÉåí~íáçåK=

1.4 PRODUCTION SPEEDS

mêçÇìÅíáçå= ëéÉÉÇë= ~êÉ= ~= ÑìåÅíáçå= çÑ= åìãÉêçìë= î~êá~ÄäÉëIëçãÉ= çÑ=ïÜáÅÜ= ~êÉW= íê~åëÇìÅÉê= ëáòÉ= ~åÇ= ÑêÉèìÉåÅóI=ã~íÉêá~äëáòÉI= ã~íÉêá~ä= äÉåÖíÜI= ã~íÉêá~ä= ÅçåÇáíáçåI= ëóëíÉã= ëÉåëáíáîáíóëÉííáåÖëI= åìãÄÉê= ~åÇ= ëÉîÉêáíó= çÑ= Ñä~ïë= ÉñÅÉÉÇáåÖ= íÜêÉëÜçäÇIéáéÉ=ëíê~áÖÜíåÉëëI=ÉíÅK=råÇÉê=åçêã~ä=ÅçåÇáíáçåI=ìëáåÖ=íÜÉ=êÉÅJçããÉåÇÉÇ= ?Ñìää= ëÅ~å?I= åçåJëíçé= ëÅ~ååáåÖ= ëéÉÉÇë= ~îÉê~ÖÉ~ééêçñáã~íÉäó=PM=EíÜáêíóF=ëÉÅçåÇë=éÉê=áåÅÜ=çÑ=çìíëáÇÉ=Çá~ãÉíÉêK=

bu^jmibW= PM= ëÉÅK= ñ= T?= Z= ^ééêçñK= PKR=ãáåìíÉë= éÉê= QM= ÑççíäÉåÖíÜK

rëáåÖ= íÜÉ= ?ãáää= ëÅ~å?I= åçåJëíçé= ëÅ~ååáåÖ= ëéÉÉÇë= ~îÉê~ÖÉ~ééêçñáã~íÉäó=NM=EíÉåF=ëÉÅçåÇë=éÉê=áåÅÜ=çÑ=çìíëáÇÉ=Çá~ãÉíÉêK=

bu^jmibW= NM= ëÉÅK= ñ= T?= Z= ^ééêçñK= TM= ëÉÅçåÇë= éÉê= QM= ÑççíäÉåÖíÜK=

cçê= ÅçãéäÉíÉ= ÅóÅäÉ= íáãÉI= ìëáåÖ= íÜÉ= ëí~åÇ~êÇ= äç~ÇáåÖ= ~åÇìåäç~ÇáåÖ=éêçÅÉÇìêÉëI=~ééêçñáã~íÉäó=N=EçåÉF=ãáåìíÉ=áë=~ÇÇÉÇÑçê=äç~ÇáåÖ=~åÇ=ìåäç~ÇáåÖK=

1.5 ULTRASONIC TEST INSTRUMENTS

qÜÉ=bqJpbofbp=íÉëí=ëóëíÉãë=Ü~îÉ=OQ=ÅÜ~ååÉä=Ñä~ïLíÜáÅâåÉëëÅ~é~ÄáäáíóK=_~ëÉÇ=çå= íÜÉ= àçÄ= êÉèìáêÉãÉåíI=~åó=ÅÜ~ååÉä=åìãJÄÉêë=çÑ=OQ=Å~å=ÄÉ=~ëëáåÖÉÇ=íç=Ñä~ï=çê=íÜáÅâåÉëëK=fí=Ü~ë=~=ã~ñJáãìã=éìäëÉ=êÉéÉíáíáîÉ=ÑêÉèìÉåÅó=çÑ=OM=heòK=qÜÉ=çåÄç~êÇ=Ç~í~éêçÅÉëëáåÖ=Å~é~Äáäáíó=éêçîáÇÉë=êÉ~ä=íáãÉ=ìäíê~ëçåáÅ=íÉëíáåÖ=ÑçêçáäÑáÉäÇ=íìÄìä~ê=ÖççÇëK

1.6 TRANSDUCERS

qÜÉ=bqJpbofbp= íÉëí= ëóëíÉãë=ìíáäáòÉ=ëéÉÅá~ääó=ÇÉëáÖåÉÇI=ÅìëJíçã=Äìáäí=íê~åëÇìÅÉêëK=qÜÉ=Åêóëí~ä=áë=ëÉí=áå=~=ÅóäáåÇêáÅ~ä=ÜçìëJáåÖ=~åÇ=éêÉJëÉí= íç=~= ÑáñÉÇI=ëéÉÅáÑáÉÇ=~åÖäÉ=~í=ã~åìÑ~ÅíìêáåÖKj~åó=ÇáÑÑÉêÉåí=ëáòÉëI=ÑêÉèìÉåÅáÉë=~åÇ=~åÖäÉë=Å~å=ÄÉ=ìíáäáòÉÇ=íç~ÅÅçããçÇ~íÉ=ãçëí=~åó=åÉÉÇK=


TECHNICAL

INFORMATION

IN GOD WE TRUST


1.7 TRANSDUCER HEAD ASSEMBLY

qÜÉ= íê~åëÇìÅÉê= ÜÉ~Ç= ~ëëÉãÄäáÉë= ~êÉ= ìåáèìÉäó= ÇÉëáÖåÉÇ= ~åÇ

ÑáÉäÇJéêçîÉå=Ñçê=êìÖÖÉÇåÉëë=~åÇ=Åçåíáåìçìë=éêçÇìÅíáçå=ëÉêîJáÅÉK=`çåëíêìÅíáçå=áë=çÑ=ÅçêêçëáçåJêÉëáëí~åí=ã~íÉêá~äK=eáÖÜJÇÉåJëáíó= éä~ëíáÅ=ïÉ~êJëÜçÉë= éêçíÉÅí= íÜÉ= íê~åëÇìÅÉêë= ~åÇ= Åçåí~áåíÜÉ= Åçìéä~åí= íç= éêçîáÇÉ= íÜÉ= ÇÉëáêÉÇ=ï~íÉê= Ö~é= ÄÉíïÉÉå= íÜÉíê~åëÇìÅÉê=~åÇ=íÜÉ=éáéÉ=ëìêÑ~ÅÉK=lêáÉåí~íáçå=~åÇ=îÉêíáÅ~ä=éçëáJíáçå= çÑ= íÜÉ= íê~åëÇìÅÉêë= ~êÉ= ~Çàìëí~ÄäÉK= táíÜ= íÜÉìåáèìÉ= bqJpbofbp= ÜÉ~Ç= ÇÉëáÖåI= íê~åëÇìÅÉêë= ~êÉÉ~ëáäó= áåíÉêÅÜ~åÖÉÇ= ïáíÜ= ÑÉï= äáãáí~íáçåë= çå= ëáòÉI~åÖäÉ=~åÇ=ÑêÉèìÉåÅóK=qÜáë=ÇÉëáÖå=~ääçïë=Ñçê=èìáÅâëÉíJìéë= ~åÇLçê= ÅÜ~åÖÉçîÉêë= íç= ~ÅÅçããçÇ~íÉ= ~î~êáÉíó=çÑ=åÉÉÇëK=

1.8 SIGNAL MONITORING

qÜÉ= bqJpbofbp= ìäíê~ëçåáÅ= áåëéÉÅíáçå= ëóëíÉãëáåÅçêéçê~íÉ= îáëì~ä= Çáëéä~óëI= îáëì~ä= ~ä~êãëI= ~ìÇáç~ä~êãëI= ~åÇ= êÉÅçêÇÉÇ= ~å~äçÖ= íç= áåÇáÅ~íÉ= ëìëéÉÅíéáéÉ= ÅçåÇáíáçåëK= sáëì~ä= Çáëéä~óë= ~êÉ= çÑ= êÉ~äJíáãÉ~å~äçÖ=Ñêçã=~ää=ÅÜ~ååÉäë=~åÇ=ÇáÖáí~ä=ãçåáíçêáåÖ=çÑíÜáÅâåÉëë= êÉ~ÇáåÖëK= sáëì~ä= ~ä~êãë=Åçåëáëí= çÑ= êÉ~äJíáãÉ=ibaDëI=ä~íÅÜáåÖ=ibaDë=~åÇ=êÉÅçêÇÉÇ=~ä~êãë=íçáåÇáÅ~íÉ= íÜÉ= ÇÉíÉÅíáçå= çÑ= ÅçåÇáíáçåë= ÉñÅÉÉÇáåÖíÜêÉëÜçäÇ=äÉîÉäëK=^ìÇáç=~ä~êãë=~êÉ=ëçìåÇÉÇ=áå=êÉ~äJíáãÉ=Ñçê=ÅçåÇáíáçåë=ÉñÅÉÉÇáåÖ=íÜêÉëÜçäÇ=äÉîÉäë=~åÇ~êÉ= çÑ= ÇáÑÑÉêÉåí= íçåÉë= íç= ÇáëíáåÖìáëÜ= ÄÉíïÉÉå= faÑä~ïëI=la=Ñä~ïë=~åÇ=ï~ää=íÜáÅâåÉëë=ãÉ~ëìêÉãÉåíëKoÉÅçêÇÉÇ=~å~äçÖ= áë=Åçåíáåìçìë= Ñçê=ï~ää= íÜáÅâåÉëë~åÇ= Å~å= ÄÉ= ëÅ~äÉÇ= íç= íÜÉ= çéÉê~íçê= çê= ÅìëíçãÉêë

çïå= êÉèìáêÉãÉåíëK= qÜÉ= ~å~äçÖ= ëáÖå~ä= Ñä~ï= ÅÜ~ååÉäë= ~êÉêÉÅçêÇÉÇ= ~í= íÜÉ= éêçéÉê= ~ãéäáíìÇÉ= ïÜÉåÉîÉê= íÜÉ= ëáÖå~äÉñÅÉÉÇë= íÜêÉëÜçäÇ= äÉîÉäëK= qÜÉ= íÜêÉëÜçäÇ= äÉîÉä= Å~å= ÄÉ= ëÉí= íç

òÉêç=EMF=Ñçê=Åçåíáåìçìë=ãçåáíçêáåÖ=çÑ=íÜÉ=~å~äçÖ=ëáÖJå~äK

1.9 SYSTEM CONTROL

qÜÉ=bqJpbofbp=ìäíê~ëçåáÅ=áåëéÉÅíáçå=ëóëíÉãë=áåÅçêJéçê~íÉ=~=éêçÖê~ãã~ÄäÉ= äçÖáÅ=ÅçåíêçääÉê= íç= Ñ~Åáäáí~íÉáå= ÄçíÜ= éáéÉ= Ü~åÇäáåÖ= ~åÇ= íÜÉ= áåëéÉÅíáçå= éêçÅÉëëKqÜÉ= ìëÉ= çÑ= ~= ÅçãéìíÉê= ÖÉåÉê~íÉÇ= íçìÅÜ= ëÅêÉÉåÖêÉ~íäó=ÉåÜ~åÅÉë=íÜÉ=çîÉê~ää=ëóëíÉã=Å~é~ÄáäáíóI=~ÉëJíÜÉíáÅëI=~åÇ=åçáëÉ=áããìåáíó=íÜ~í=áë=åçêã~ääó=~ëëçÅáJ~íÉÇ= ïáíÜ= ãÉÅÜ~åáÅ~ä= ëïáíÅÜÉëK= cìêíÜÉê= ëóëíÉããçÇáÑáÅ~íáçåë= ~êÉ= ã~ÇÉ= ãìÅÜ= ãçêÉ= É~ëáäóI= ~ë= åçëóëíÉã= êÉïáêáåÖ= áë= êÉèìáêÉÇK= tÜáäÉ= ìëáåÖ= íÜáë~Çî~åÅÉÇ=ÑÉ~íìêÉ=~ää=áåëéÉÅíáçå=ÅêáíÉêá~=áë=Åçåëí~åíäóãçåáíçêÉÇ=Äó=íÜÉ=mi`=íç=áåëìêÉ=íÜ~í=åç=~êÉ~=çÑ=íÜÉáåëéÉÅíáçå= áë= äÉÑí= íç= ÅÜ~åÅÉK= qÜÉ= íçí~ääó= ~ìíçã~íáÅÑÉ~íìêÉ=~äëç=Ü~ë=íÜÉ=~ÇÇÉÇ=ÄÉåÉÑáí=çÑ=êÉÇìÅáåÖ=çéÉêJ~íçê=Ñ~íáÖìÉK=

TECHNICAL

INFORMATION


1.10 OPTIONAL DIGITAL COMPUTER

ENHANCEMENT PACKAGE

oÉ~ä=íáãÉ=ÅçãéìíÉê=ÉåÜ~åÅÉãÉåí=çÑ=íÜÉ=áåëéÉÅíáçå=áë=éçëëáJÄäÉ=ìëáåÖ= íÜÉ= ä~íÉëí= áå= íçÇ~óDë= íÉÅÜåçäçÖóK=qÜÉ=ÇáÖáí~ä=ÅçãJéìíÉê= ÉåÜ~åÅÉãÉåí= é~Åâ~ÖÉ= ~î~áä~ÄäÉ= Ñçê= íÜÉ= bqJpbofbpáåëéÉÅíáçå=ëóëíÉãëI=áåíÉÖê~íÉë=íÜÉ=ìäíê~ëçåáÅ=ÉäÉÅíêçåáÅë=ïáíÜ~=éêçéêáÉí~êó=íáãÉ=Ççã~áå=Ñ~ÅáäáíóI=âåçïå=~ë=íÜÉ=bqJOS=ãçÇJìäÉK=qçÖÉíÜÉê=ïáíÜ=íÜÉ=ÅçãéìíÉê=ëçÑíï~êÉ=é~Åâ~ÖÉI=ìäíê~ëçåJáÅ=ëáÖå~äë=~êÉ=ÅçåîÉêíÉÇ=áåíç=ÇáÖáí~ä=áåÑçêã~íáçå=~åÇ=Çáëéä~óÉÇçå=~=Åçäçê=ÅçÇÉÇI=ÅçãéìíÉêJ~åáã~íÉÇ=ëÅêÉÉåK=qÜáë=áåÑçêã~Jíáçå=áë=Çáëéä~óÉÇ=~ÅÅìê~íÉäó=áå=ÄçíÜ=íÜÉ=u=~åÇ=vJ~ñáëI=Ä~ëÉÇçå=íÜÉ=`ìëíçãÉêDë=êÉèìáêÉãÉåíëI=~åÇ=ëíçêÉÇ=çå=íÜÉ=ÅçãéìíJÉêë= áåíÉêå~ä= Ü~êÇ=ÇêáîÉI= çéíáÅ~ä= Ñäçééó=ÇêáîÉI= çê= íÜÉ= ä~íÉëí= áåÅçãé~Åí=Çáëâ=íÉÅÜåçäçÖóK=

tÜÉå=~ÅÅìê~Åó=~åÇ=ëéÉÉÇ=~êÉ=çÑ=íÜÉ=ìé=ãçëí=áãéçêí~åÅÉ=ÑçêéêçîÉJìé=çÑ=áåÇáÅ~íáçåë=ÑçìåÇ=ÇìêáåÖ=íÜÉ=Ñìää=ÄçÇó=áåëéÉÅíáçåéêçÅÉëëI= íÜÉ= ÅçãéìíÉê= ÖÉåÉê~íÉÇ= êÉéçêíáåÖ= ëóëíÉã= ïáääÄÉÅçãÉ= ~å= áåî~äì~ÄäÉ= íççäK= aÉí~áäÉÇ= áåÑçêã~íáçå= çÑ= áåÇáÅ~Jíáçåë= ïÜáÅÜ= ÉñÅÉÉÇ= íÜêÉëÜçäÇ= äÉîÉäëI= áë= ÖÉåÉê~íÉÇ= ~ë= Ü~êÇÅçéó=çå=éêçîÉJìé=ëÜÉÉíëK=qÜÉ=ÇÉí~áäÉÇ=áåÑçêã~íáçå=áåÅäìÇÉëíÜÉ= àçÄ= åìãÄÉêI= äÉåÖíÜ= åìãÄÉêI= Ç~íÉI= íáãÉI= Ñä~ï= åìãÄÉêIíê~åëÇìÅÉê= åìãÄÉêI= íê~åëÇìÅÉê= ~åÖäÉI= ëáÖå~ä= ~ãéäáíìÇÉIfaLla= áåÑçêã~íáçåI= u= éçëáíáçåI= v= éçëáíáçåI= ~åÇ= íçí~ä= í~ääóäÉåÖíÜK=^å=~êÉ~=Ñçê=Ñáå~ä=Åä~ëëáÑáÅ~íáçå=çÑ=íÜÉ=äÉåÖíÜ=áë=~äëç=éêçJîáÇÉÇ=çå= íÜÉ=éêçîÉJìé=ëÜÉÉíK= cáå~ä= Åä~ëëáÑáÅ~íáçå= áë= ÉåíÉêÉÇáåíç=íÜÉ=ÅçãéìíÉê=ÖÉåÉê~íÉÇ=êÉéçêíáåÖ=ëóëíÉãK=^í=íÜÉ=ÅçãJéäÉíáçå=çÑ=íÜÉ=àçÄI=íÜáë=áåÑçêã~íáçå=áë=ÖÉåÉê~íÉÇ=áå=Ü~êÇ=Åçéó~ë=íÜÉ=Ñáå~ä=áåëéÉÅíáçå=êÉéçêíK=

a~í~=ÇÉêáîÉÇ=Ñêçã=ÄçíÜ=Ñä~ï=ìåáíë=~åÇ=íÜÉ=ï~ää=ãÉ~ëìêÉãÉåíìåáí= áë=êçìíÉÇ=íç=~å=çéíáÅ~ä=Çáëéä~ó=é~åÉäK=`çåí~áåÉÇ=çå=íÜáëÇáëéä~ó=é~åÉä=áë=~=ëÉêáÉë=çÑ=ëÉãáÅçåÇìÅíçê=ä~ãéëK=b~ÅÜ=ÅÜ~åJåÉä=çÑ= áåÅçãáåÖ= áåÑçêã~íáçå= áë=éêçîáÇÉÇ=~ë= íïç= EOF=ÇáÑÑÉêÉåíáåÇáÅ~íáçåëK=qÜÉ=Ñáêëí=áë=~=ä~ãé=ïáíÜ=î~êá~ÄäÉ=Çìê~íáçå=Ñêçã=Míç=TR=ëÉÅçåÇëK=qÜáë=ä~ãé=~Åíë=~ë=~=Üáëíçêó=áåÇáÅ~íçê=Ñçê=áåÇáJÅ~íáçåë=ÑçìåÇ=ÇìêáåÖ=íÜÉ= áåëéÉÅíáçå=éêçÅÉëëK= få=íÜÉ=Å~ëÉ=çÑÑä~ï=ÅÜ~ååÉäëI=íïç=EOF=Üáëíçêó=ä~ãéë=~êÉ=ìëÉÇ=áå=ÅçåàìåÅíáçåïáíÜ= íÜÉ=bqJOS=ãçÇìäÉ= íç=ÇÉíÉêãáåÉ=ïÜÉíÜÉê= íÜÉ= áåÇáÅ~íáçåï~ë= çå= íÜÉ= fa= çê= íÜÉ=la= ëìêÑ~ÅÉK= ^ìÇáÄäÉ= ~ä~êãë= ~êÉ= ëóåJÅÜêçåáòÉÇ=ïáíÜ=íÜÉ=êÉ~ä=íáãÉ=áåÅçãáåÖ=Ç~í~=~åÇ=ìëÉ=ãìäíáéäÉíçåÉë=íç=ÇáëíáåÖìáëÜ=ÄÉíïÉÉå=fa=~åÇ=la=áåÇáÅ~íáçåëK=

a~í~= ÖÉåÉê~íÉÇ= Äó= íÜÉ= aáÖáí~ä= `çãéìíÉê= båÜ~åÅÉãÉåím~Åâ~ÖÉ=áë=êçìíÉÇ=Ñçê=ëíçê~ÖÉ=áå=íÜÉ=ÅìëíçãÉêDë=ÇÉëáêÉÇ=ÑçêJã~íK=qÜáë=áåÑçêã~íáçå=Å~å=ÄÉ=êÉÅ~ääÉÇ=~åÇ=Çáëéä~óÉÇ=Ñçê=ÑìíìêÉêÉÑÉêÉåÅÉ= Äó= íÜÉ= éçëí= áåëéÉÅíáçå= ëçÑíï~êÉ= é~Åâ~ÖÉK= j~åóçíÜÉê= ëçÑíï~êÉ= éêçÖê~ãë= ~êÉ= éêçîáÇÉÇ= ïáíÜ= íÜÉ= `çãéìíÉêbåÜ~åÅÉãÉåí=m~Åâ~ÖÉK=qÜÉëÉ=Åçåëáëí=çÑ= áåëíêìãÉåí=ëÉííáåÖí~ÄäÉë=Ñçê=íÜÉ=hpbDë=~åÇ=tajI=ÉåÅçÇÉê=ëÅêÉÉåëI=íê~åëÇìÅÉêÇÉëáÖå=ëçÑíï~êÉI=~åÇ=ÜÉäáñ=Å~äÅìä~íáçå=ëçÑíï~êÉK=^ää=çÑ=íÜÉëÉé~Åâ~ÖÉë=~êÉ=Åìëíçã=ÇÉëáÖåÉÇ=íç=ãÉÉí=íÜÉ=ÅìëíçãÉêDë=áåÇáJîáÇì~ä=ëéÉÅáÑáÅ~íáçåë

1.11 VISONIC Virtual Imaging Inspection

qÜÉ=ä~íÉëí=íÉÅÜåçäçÖó=êÉèìáêÉÇ=íç=êÉ~ÅÜ=íÜÉ=ïçêäÇDë=ÇÉÉéÉëíçáä= ~åÇ=Ö~ë=ïÉää=ÇÉéíÜI= áë=qÉÅÜåáÅ~ä= fåÇìëíêáÉëI= fåÅKI=éêçéêáJÉí~êó=ä~íÉëí= áååçî~íáçåK=kçï=çìê=ÅìëíçãÉêë=Å~å=îáÉïI=Eï~äâFíÜÉ=éáéÉ=Ñêçã=áåëáÇÉI=çìíëáÇÉI=~åÇ=~ë=~=Ñä~í=éä~íÉI=ëíçé=~í=~åóéçáåí=~åÇ=îáÉï=íÜÉ=ï~ää=íÜáÅâåÉëëI=~åÇ=ÅçåÇáíáçå=çÑ=íÜÉ=éáéÉK=

TECHNICAL INDUSTRIES INC.IN GOD WE TRUST


TECHNICAL

INFORMATION

IN GOD WE TRUST


`~äÅìä~íÉ= íÜÉ= Äìêëí= ê~íÉI= Åçää~éëÉ= ê~íÉI= íÉåëáäÉ= ëíêÉåÖíÜ= Eéìääê~íÉF=çÑ=É~ÅÜ= àçáåíI=çÄí~áå=~=éÉêã~åÉåí= êÉÅçêÇI=~åÇ=Äó=ÅçãJé~êáåÖ=êÉÅÉåí=áåëéÉÅíáçåë=íç=éêÉîáçìë=çåÉëI=íÜìë=Éå~ÄäáåÖ=íÜÉÅäáÉåí=íç=éêçàÉÅí=ÑìíìêÉ=äáÑÉ=ÉñéÉÅí~åÅóI=~åÇ=ìë~ÖÉ=çÑ=íÜÉ=éáéÉK

éáÅíìêÉë=ÄÉäçï=~êÉ=sfplkf`»=Pa=áã~ÖÉë=çÑ=áåëéÉÅíÉÇ=éáéÉI=íÜÉäáÖÜíÉê=íÜÉ=ÅçäçêI=íÜÉ=íÜáååÉê=íÜÉ=ï~ää=íÜáÅâåÉëë=çÑ=íÜÉ=éáéÉI~åÇ=íÜÉ=Ç~êâÉê=íÜÉ=áã~ÖÉ=íÜÉ=íÜáÅâÉê=íÜÉ=ï~ää=íÜáÅâåÉëë=çÑ=íÜÉéáéÉK=

Inside View Outside View

Inside, outside, DATA, cross sectional Plane View



TECHNICAL

INFORMATION


Company

Information

IN GOD WE TRUST


Welcome Customers,

qÉÅÜåáÅ~ä= fåÇìëíêáÉëI= fåÅKI= ï~ë= Éëí~ÄäáëÜÉÇ= áå= NVTNI= ~åÇ= íÜÉÅçãé~åó=áë=ïÉää=âåçïå=íÜêçìÖÜçìí=íÜÉ=ïçêäÇ=Ñçê=ÇÉîÉäçéáåÖI~åÇ=áåíêçÇìÅáåÖ=íÜÉ=bqJpÉêáÉë=Ñìää=ÑìåÅíáçå=Ñìää=äÉåÖíÜ=ìäíê~ëçåJáÅ= éáéÉ= áåëéÉÅíáçå= ëóëíÉã= ïÜáÅÜ= áë= Ñ~îçêÉÇ= Äó= ãçëí= çÑ= íÜÉã~àçê=çáä=Åçãé~åáÉëK=

qÉÅÜåáÅ~ä= fåÇìëíêáÉëI= fåÅKI= ï~ë= íÜÉ= Ñáêëí= íç= áåíêçÇìÅÉ= íÜÉ`çãéìíÉê=a~í~=m~Åâ~ÖÉ=ëéÉÅáÑáÉÇ=Äó=ã~àçê=çáä=Åçãé~åáÉëK=

Company Locations:

Louisiana:

mKlK=_çñ=ROROPI=i~Ñ~óÉííÉ=i^=TMRMRqÉä=PPTJVUQ=OMMM=c~ñ=PPTJVUU=NTTTmä~åíWNNMM=kK=^áêéçêí=oç~Ç^ÄÄÉîáääÉ=i^=TMRNM

Texas:

NRQPU^=jáääÉê=låÉ=oç~Çeçìëíçå=qu=TTMQVqÉä=OUNJUSO=OUMMléÉê~íáçåë=Ñ~ñK=OUNJUSO=OUOUpÜáééáåÖ=C=oÉÅÉáîáåÖ=Ñ~ñK=OUNJUSO=MMPM

Mexico:

OOO=fåÇÉéÉåÇÉåÅá~`KmK=VQOVM_çÅ~=ÇÉä=oáçIsÉê~ÅêìòI=jÉñáÅçqÉäKLc~ñK=EROF=EOVF=USMTPP

Saudi Arabia:

^äJpìï~áâÉí=bëíKI=mKlK=_çñ=PON^äJhÜçÄ~ê=PNVROp~ìÇá=^ê~Äá~qÉäK=EVSSF=EPF=UVUJRMMMc~ñK=EVSSF=EPF=UVUJRRMM

Company Information

Technical Industries, Inc., policy is to offer the customers

the highest quality, and the best services possible.


CONTACT

INFORMATION

IN GOD WE TRUST


Contact Information

Send us an e-mail:

qÉÅÜåáÅ~ä=fåÇìëíêáÉëI=fåÅK=íÉÅÜåáÅ~äáåÇìëíêáÉë]íÉÅÜåáÅ~äáåÇìëíêáÉëKÅçã

Management & Engineering

dÉçêÖÉ=jK=pÑÉáê `blsÉêåçå=_~ìã sáÅÉ=mêÉëáÇÉåí=j~êâÉíáåÖg~ãÉë=tK=_É~ÇäÉ ^ÇîáëçêLaáêÉÅíçêpÜ~ïå=_Éåçáí iÉÖ~ä=^ÇîáëçêLaáêÉÅíçêbÇ=_~ìÇçáå qêÉ~ëìêÉêLaáêÉÅíçê`Üêáë=gçÜåëçå===================mêçàÉÅí=aÉîÉäçéãÉåí=^åÇ=^ëëÉíë=j~å~ÖÉãÉåíLaáêÉÅíçêgçóÅÉ=wÜì `cl=pÉÅêÉí~êó=lÑÑáÅÉêt~óåÉ=e~ää cáå~åÅá~ä=^ÇîáëçêL`çãéíêçääÉêm~ìä=cçêêÉëí ^ÅÅçìåíáåÖ=aÉé~êíãÉåíoçå=máéÉê pÉåáçê=^ÅÅçìåí=bñÉÅìíáîÉoçÄÉêí=`çñ _ìëáåÉëë=aÉîÉäçéãÉåí=mKoKt~äíÉê=tçòåá~â mêçàÉÅí=båÖáåÉÉêmê~Äáå=gçëÜá båÖáåÉÉêLfpl=`ìëíçÇá~åaêK=cê~åâ=t~åÖ oCa=båÖáåÉÉê=mÜÇKh~áäì=d~ç båÖáåÉÉêL`çãéìíÉê=aÉëáÖåë=jKpKjçÜ~ãÉÇ=p~äÜá båÖáåÉÉêLbèìáéãÉåí=aÉëáÖåë=jKpKlÅí~îáç=jçê~äÉë léÉê~íáçå=pìéÉêáåíÉåÇÉåíbÇÖ~ê=dìíáÉêêÉò kaq=pìéÉêáåíÉåÇÉåíbäáÖáç=jçåíÉåÉÖêç kaq=péÉÅá~äáëíLn^gçëÉ=sáää~äçÄçë kaq=péÉÅá~äáëígçëÉ=oçãÉêç kaq=péÉÅá~äáëíLp~ÑÉíó======gçëÉ=sáää~ÑìÉêíÉ kaq=péÉÅá~äáëío~ó=oáÅÜ~êÇ p~ÑÉíó=fåëíêìÅíçêgçêÖÉ=jçê~äÉë j~áåíÉå~åÅÉ=pìéÉêáåíÉåÇÉåí

Board Members

dÉçêÖÉ=jK=pÑÉáê K`Ü~êäÉë=jK=pÑÉáêkáÇ~=nK=pÑÉáêjáÅÜÉä=bK=pÑÉáê


CUSTOMERS

PqÉÉPa=aáêÉÅíáçå~ä=aêáääáåÖ^ãÉê~Ç~=eÉëë=`çêéK^ãÉêáÅ~å=`çãÉíê~I=fåÅK^ãÉáêÅ~å=fåíK=`çêéK^å~Ç~êâç=mÉíêçäÉìã=`êçéK^é~ÅÜÉ=`çêéçê~íáçå^ééäáÉÇ=aêáääáåÖ=qÉÅÜåçäçÖóI=fåÅK^ëéÉå=bñéäçê~íáçåI=fåÅK^ëíêçÄçåÇ=`çK^íÜ~åçê=qÉñ~ë=fåÅK^íä~ë=qìÄìä~êI=imq̂m=láä=C=d~ë=`çêéK^îÉëí~mçä~êáí=máéÉ=`çK_=C=q=oÉåí~äë_KmK=^ãÉêáÅ~_KmK=aÉÉéï~íÉê_KmK=låëÜçêÉ_KmK=pÜÉäÑ_~âÉê=láä=qççäë=C=pÉêîáÅÉë_~Äáå=oÉåí~ä=qççäë=J=i^_~âÉê=láä=qççäë=J=qu_Éää=pìééäó=fI=iKmK_em=mÉíêçäÉìãJ^ãÉêáÅ~ëI=fåÅK_km=mÉíêçäÉìã_çáë=ÇÛ^êÅ_çìêä~åÇ=C=iÉîÉêáÅÜ=pìééäó=`çãé~åóI=fåÅK_mLLs^pq̂ o_m^LaêáääáåÖ_êáíáëÜ=_çêåÉç=bñéäçê~íáçåI=fåÅK_ìêäáåÖíçå=J=låëÜçêÉ_ìêäáåÖíçå=lÑÑëÜçêÉ=oÉëçìêÅÉë`Ce=máéÉ=pÉêîáÅÉë`KaK=aìåå=máéÉ=C=pìééäó`~Äçí=láä=C=d~ë=`çêéK`~Åíìë=máéÉ=C=pìééäó`~ääçå=mÉíêçäÉìã=léÉê~íáåÖ=`çK`çãéÄÉää=bäÉÅíêáÅ=jçíçêë=iíÇ`~éêçÅâ=máéÉ`af=j~êáåÉ`Éåíìêó=bñéäçê~íáçå=kÉï=lêäÉ~åëI=fåÅK`Ü~ãéáçåë=máéÉ=C=pìééäó`ÜÉë~éÉ~âÉ=båÉêÖó=`çêéK`ÜÉîêçå=`çêéK`ÜáÅâ~ë~ï=aáëíêáÄìíçêëI=fåÅK`ÜáäÉë=lÑÑëÜçêÉ

`áåÅç=máéÉ=C=pìééäó`kd=mêçÇìÅáåÖ=`çãé~åó`ç~ëí~ä=láä=C=d~ë`çÄê~=láä=C=d~ë`çåÉëíçÖ~`çåçÅçmÜáääáéëI=fåÅK`çåëçäáÇ~íÉÇ=båÖáåÉÉêáåÖ=pÉêîáÅÉëI=fåÅK`çåíáåÉåí~ä=^ääçóë=~åÇ=pÉêîáÅÉë`çåíáåÉåí~ä=`~ëáåÖ=iíÇK`çåíáåÉåí~ä=bãëÅç`çêêçëáçå=oÉëáëí~åí=^ääçóëI=im`ìëíçã=qÜêÉ~ÇáåÖaÉÉé=dìäÑ=båÉêÖóaÉîçå=båÉêÖó=`çêéKaá~ãçåÇ=lÑÑëÜçêÉaáêÉÅíáçå~ä=oÉåí~äaçÄåáâ~ê=p~äÉëI=fåÅKaçãáåáçå=bCmI=fåÅKaçïåÜçäÉ=máéÉ=C=bèìáéãÉåíI=ii`aêáääJnìáéIfåÅKaêáää=`ççä=póëíÉãI=fåÅaêáää=jçíçê=pÉêîáÅÉëI=låÅKaóå~ëíó=qê~åëéçêí~íáçåbKlKdK=oÉëçìêÅÉëIfåÅKbä=m~ëç=láä=C=d~ëbä=m~ëç=mêçÇìÅíáçå=`çKbäÑ=bñéäçê~íáçåbåÉêÖÉå=oÉëçìêÅÉë=j^nI=fåÅKbåÉêÖó=^ääçóëbåÉêÖó=máéÉ=ii`bkf=mÉíêçäÉìã=`çKI=fåÅbî~åë=eçìëíçå=`çêéKbñéäçêÉÅç=fåíÉêå~íáçå~ä=iiKbåÉêéêç=fåíÉêå~íáçå~äbññçå=`çãé~åóI=rKpK^Kbññçå=jçÄáäÉ=`çêéçê~íáçåbññçåjçÄáä=aÉîÉäçéãÉåí=`çãé~åóbññçåjçÄáäÉ=oÉëÉ~êÅÜ=rp^cáå~=láä=C=`ÜÉãáÅ~äcáå~åÅá~ä=^ëëáëí~åÅÉI=fåÅKcj`=qÉÅÜåçäçÖáÉëI=fåÅKcçêÉëí=láäcìÖêçJjÅ`äÉää~åÇ=jd=fåÅKdJ_=qìÄìä~êëI=fåÅKd~íÉï~ó=içÖáëíáÅë=dêçìéI=fåÅKdäçÄ~ä=`çãéäÉíáçåë=pÉêîáÅÉëI=fåÅK

Some of our Customers



CUSTOMERS


däçÄ~ä=j~êáåÉdê~åí=mêáÇÉÅçdìáåÉ~=`çãé~åódìäÑ=pí~íÉë=qìÄÉe~ääáÄìêíçåe~ääáÄìêíçå=`ÉåíÉêÑçêãe~ãáäíçå=jÉí~äeÉëë=bCm=`çêéKeáäÅçêé=båÉêÖóeçï~êÇ=C=^ëëçÅá~íÉëeìåíáåÖ=láäÑáÉäÇeìåíáåÖ=mÉíêçíìÄÉfåÅç=^ääçófåíÉêÖê~íÉÇ=aáêÉÅíáçå~ä=oÉëçìêÅÉëfåíÉêå~íáçå~ä=láäÑáÉäÇ=pÉêîáÅÉëfåíÉêã~êáåÉ=pÉêîáÅÉëI=fåÅKhÉêê=jÅdÉÉ=`çêéçê~íáçåhåáÖÜí=fåëéÉÅíáçå=`çãé~åóhçééÉä=píÉÉäiçåÉ=pí~ê=píÉÉä=`çêéçê~íáçåiçìáëá~å~=i~åÇ=C=bñéäçê~íáçåjC=d=qÉëíáåÖ=C=pÉêîáÅÉëjK`K=qìÄìä~êj~ÖÉää~å=bñéäç~íáçåj~ååÉëã~åå=láäÑáÉäÇ=qìÄìä~êëj~êáåÉê=båÉêÖóI=fåÅKj~êìÄÉåá=qìÄìä~êëI=fåÅKj~ñìë=_çäáîá~jÅc~êä~åÇ=mìãé=`çKjÅgìåâáå=^éé~ä~ÅÜá~åjÅjçê~å=láä=C=d~ëI=ii`jáÇä~åÇ=máéÉI=ii`KjáääÉê=máéÉäáåÉ=ÇÉ=jÉñáÅçI=p^=ÇÉ=`sjáíëìá=qìÄìä~ê=mêçÇìÅíëjçÄáä=bñéäçê~íáçå=C=mêçÇìÅíáçåjçê~åJdìäÑ=pÜáééáåÖ=^ÖÉåáÅáÉëjìÇp~îÉêI=fåÅKjìêéÜó=bCmjta=pÉêîáÅÉëk~íáçå~ä=láäïÉääkÉïÑáÉäÇ=bñéäçêÉêI=fåÅkçÄäÉ=aêáääáåÖ=E`~å~Ç~F=iíÇKkçÄäÉ=aêáääáåÖ=rKpK=fåÅKkçÄäÉ=båÉêÖóI=fåÅKkçêíÜ=pí~ê=píÉÉä=eçìëíçålÇóëëÉó=oÉëçìêÅÉ=j~åÖÉãÉåíI=fåÅKlcpI=fåÅKláä=`çìåíêó=qìÄìä~ê

láä=qÉÅÜåçäçÖó=pÉêîáÅÉëláä=qççäë=fåÅKláä=tÉää=aáêÉÅíáçå~äláäÑáêäÇ=máéÉ=C=oÉåí~äI=ii`lãÉÖ~=k~íÅÜáèI=fåÅKlãëÅç=fåÇìëíêáÉëlìíçhìãéì=pí~áåäÉëë=máéÉI=fåÅKmÉäáÅ~å=máéÉCpìééäó=fåÅKmÉäJqÉñ=láä=`çKI=fåÅmÉåí~Öçå=cêÉáÖÜí=pÉêîáÅÉëI=fåÅKmÉíêç=^ãáÖçëmÉíêçèìÉëí=båÖêÖóI=fåÅKmÜçÉåáñ=bñéäçê~íáçåmáçåÉÉê=k~íìê~ä=oÉëçìêÅÉëmáéÉÅç=pÉêîáÅÉëmçïÉê=pçäìíáçåëI=ii`mêÉãáÉê=máéÉmêÉãáÉê=máéÉJ=eçëíçåmêáãÉ=qìÄìä~êëI=fåÅKmìãé=bèìáéãÉåíI=fåÅKmêáÇÉÅçI=fåÅKmóê~ãáÇ=L=bññçå=jçÄáä=`çKmóê~ãáÇ=qìÄìä~ê=mêçÇìÅíënì~áä=qççäëI=iimoÉÄÉä=aêáääáåÖ=`çãé~åóoÉÇã~å=pìééäóoçÅâó=jçìåí~áå=píÉÉä=jáääëoçï~å=aêáääáåÖ=`çãé~åóI=fåÅKoìíÜÉêÑçêÇ=láä=`çêéçê~íáçåp~äòÖáííÉêJj~ååÉëã~åå=fåíÉêå~íáçå~äp~åíçë=rKpK^KpÉ~Öìää=båÉêÖó=`çêéçê~íáçåpÉåíáåÉä=fåëíêìãÉåí=rp^=fåÅKpÜÉåÖäá=eáÖÜä~åÇ=mÉíêçäÉìã=bèìáéK=rp^påóÇÉê=láä=C=d~ëpçÅçíÜÉêã=i~_~êÖÉI=ii`pççåÉê=máéÉ=C=pìééäópé~êí~å=píÉÉä=mêçÇìÅíëI=fåÅKpéÉÅá~äíó=oÉåí~ä=qççäI=fåÅKpíÉÉä=pÉêîáÅÉë=láäÑáÉäÇ=qìÄìä~êI=fåÅKpíÉêäáåÖ=qçïÉêë=C=i~=oçìÖÉ=qçïÉêëpíçåÉ=båÉêÖó=`çêéKI=ii`pìãáíçãç=`çêéçê~íáçåpìéÉêáçê=aêáääéáéÉpóëíÉã=máéÉ=C=pìééäóqKeK=eáää=C=^ëëçÅá~íÉëqÉñ~ë=^Cj=oÉëÉ~êÅÜ=cçìåÇ~íáçåqÉñ~ë=^ê~áI=fåÅK

IN GOD WE TRUST


qÉñ~ë=píÉÉä=`çåîÉêëáçåqÜÉ=^åëÅÜìíò=`çêéçê~íáçåqÜÉ=pÅçÑáÉäÇ=dêçìéqÜÉêã~ä=péê~ó=péÉÅá~äáëíëqÜóëëÉå=píÉÉäqçã=_êçïåI=fåÅKqçã~Ü~ïâ=båíÉêéêáëÉqççä=mìëÜÉê=pìééäóqçêèìÉiçÅâ=`çêéKqçí~ä=jáåÉíçãÉ=`çêéçê~íáçåqçí~ä=mêÉãáÉê=pÉêîáÅÉëI=fåÅKqê~åëçÅÉ~å=lÑÑëÜçêÉ=fåÅKqêá~Ç=máéÉ=C=píÉÉä=ii`Kqêá~Ç=máéÉ=C=pìééäóqêáíçå=båÖáåÉÉêáåÖ=pÉêîáÅÉëqêáÖçå=qìÄìä~êëI=fåÅKqìÄÉ=pìééäóqìÄçëÅçéÉqìÄìä~ê=`çêéK=çÑ=^ãÉêáÅ~qìÄìä~ê=qÉÅÜåçäçÖóI=fåÅKqìêåÉê=_êçëK=qêìÅâáåÖrKpK=jÉí~äërKpK=píÉÉärKpK=píÉÉä=dêçìéråçÅ~ä=bñéäçê~íáçås~ääçìêÉÅ=C=j~ååÉëã~åå=qìÄÉ=`çêéKs^j=aêáääáåÖ=Eljp`lFs^j=rp^Ks~ëí~ê=oÉëÅçìêÅÉëI=fåÅKs^j=mqp=`çKsáäÅçI=fåÅKsáåëçå=pìééäó=`çãé~åótCq=lÑÑëÜçêÉ=fåÅKtKgK=_çååÉê=pìééäó=`çãé~åót~ÖåÉê=C=_êçïåI=iíÇKtÉ~íÜÉÑçêÇ=fåíDä=ilo=aáîKtáäÇÅ~í=máéÉ=C=pìééäótáäëçå=pìééäóI=fåÅKtçêâëíêáåÖëI=ii`ui=póëíÉãëI=fåÅKw~Åâëçå=oÉëçìêÅÉëwÉåÉêÖó=oÉëçìêÅÉë=iíÇ

CUSTOMERS


PROJECTS

IN GOD WE TRUST



B.P. America

mêçàÉÅíW qêçáâ~ dìäÑ=çÑ=jÉñáÅçmêçàÉÅíW mçãé~åç dìäÑ=çÑ=jÉñáÅçmêçàÉÅíW mçãé~åç=mÜ~ëÉ=ff dìäÑ=çÑ=jÉñáÅçmêçàÉÅíW ^ëéÉå dìäÑ=çÑ=jÉñáÅçmêçàÉÅíW eçêå=jçìåí~áå dìäÑ=çÑ=jÉñáÅçmêçàÉÅíW ^ãÄÉêà~Åâ dìäÑ=çÑ=jÉñáÅçmêçàÉÅíW j~êäáå dìäÑ=çÑ=jÉñáÅçmêçàÉÅíW háåÖ= dìäÑ=çÑ=jÉñáÅçmêçàÉÅíW háåÖ=tÉëí dìäÑ=çÑ=jÉñáÅçmêçàÉÅíW háåÖDë=mÉ~â dìäÑ=çÑ=jÉñáÅçmêçàÉÅíW j~êäáå=pìÄ=pÉ~ dìäÑ=çÑ=jÉñáÅçmêçàÉÅíW qÜìåÇÉê=eçêëÉ dìäÑ=çÑ=jÉñáÅçmêçàÉÅíW _äáåÇ=c~áíÜ dìäÑ=çÑ=jÉñáÅçmêçàÉÅíW mçãé~åç=aÉÉé=pìÄ=p~äí dìäÑ=çÑ=jÉñáÅçmêçàÉÅíW aá~å~LeççîÉê dìäÑ=çÑ=jÉñáÅçmêçàÉÅíW jáÅ~ dìäÑ=çÑ=jÉñáÅçmêçàÉÅíW sçäÖ~ oìëëá~mêçàÉÅíW=j~Ç=açÖ dìäÑ=çÑ=jÉñáÅçmêçàÉÅíW j~êÖ~êáí~ _çäáîá~

ConocoPhilips

mêçàÉÅíW t~äâÉê=oáÇÖÉ

Coastal Oil & Gas

mêçàÉÅíW k~Äçêë=ROM=C=TPOmêçàÉÅíW jÉÅçã=NNR w~é~í~=`çìåíó=qumêçàÉÅíW dêìó=@P aìî~ää=`çìåíó=qumêçàÉÅíW rp^JN pí~êê=`çìåíó=qumêçàÉÅíW rp^JP=_çÄ=tÉëí=cáÉäÇ w~é~í~=`çìåíó=qumêçàÉÅíW mÉíÉê=bëí~íÉë

Chiles Offshore

mêçàÉÅíW _m=qêáåáÇ~Ç

Chesapeake Energy Corp.

mêçàÉÅíW läáîÉ=NJPP

Elf Exploration

mêçàÉÅíW sáçëÅ~=håçää

ExxonMobil

mêçàÉÅíW eáÄÉêåá~ `~å~Ç~mêçàÉÅíW jçÄáäÉ=_~ó ^ä~Ä~ã~mêçàÉÅíW p~âÜ~äáå=fëä~åÇ oìëëá~mêçàÉÅíW qáãÄÉê=tçäÑ dìäÑ=çÑ=jÉñáÅçmêçàÉÅíW hÉäíáÅë dìäÑ=çÑ=jÉñáÅçmêçàÉÅíW e~ïâë dìäÑ=çÑ=jÉñáÅçmêçàÉÅíW d~ëéá~å=pÉ~ oìëëá~mêçàÉÅíW pçìíÜ=qáãÄ~äáÉê=RQ=g~îÉäáå

Grant Prideco

mêçàÉÅíW _m=eçêå=jçìåí~áå dìäÑ=çÑ=jÉñáÅç

Noble Drilling, Ltd.-Canada

mêçàÉÅíW eáÄÉêåá~ kçî~=pÅçíá~=`~å~Ç~

Noble Drilling, Inc.-Usa

mêçàÉÅíW gáã=qÜçãëçå=oáÖ

Omega Natchiq, Inc.

mêçàÉÅíW båÖáåÅçå dìäÑ=çÑ=jÉñáÅç

T.H. Hill & Associates

mêçàÉÅíW açãáåáçå=láä=C=d~ë=lÑÑëÜçêÉ=oÉëÉ~êÅÜ

The Anschutz Corporation

mêçàÉÅíW `äçÇáåÉ=d~ë=cáÉäÇ aÉåîÉê=`çäçê~Çç

Transocean Offshore

mêçàÉÅíW jK`K=OU=q_P

Wagner & Brown, Ltd.

mêçàÉÅíW i~ìêç=içéÉò tÉëí=qÉñ~ëmêçàÉÅíW sÉä~=@N tÉëí=qÉñ~ëmêçàÉÅíW `~î~ëçë=@O tÉëí=qÉñ~ë

XL Systems, Inc.Project: Mustang Island

Zackson ResourcesProject: Camp Cooley

Some of our Projects

IN GOD WE TRUST

Louisiana

Petroleum Tower Suite #530P.O Box 52523Lafayette LA 70505Tel. 337-984 2000Fax. 337-988 1777Plant:1100 N. Airport RoadAbbeville LA 70510

Texas15438A Miller One RoadHouston TX 77049Tel. 281-862 2800Operation fax. 281-862 2828Shipping & Receiving fax. 281-862 0030

Mexico222 IndependenciaC.P. 94290Boca del Rio,Veracruz, MexicoTel./Fax. (52) [29] 860733

Al-Suwaiket Est.P.O Box 321Al-Khobar 31952Saudi ArabiaTel. (966) [3] 898-5000Fax. [966] [3] 898-5500

Saudi Arabia:

ENERGY & TECHNOLOGY Corp. TECHNICAL INDUSTRIES Inc.

ENERGY PIPE, LLC.

.

ENERGY TECHNOLOGY THREADING

energy & technology corp. technical...

Documents