enercon.de

ELECTRIC VEHICLEFAST CHARGING STATION

Powerful. Grid-friendly. Reliable.

ENERCON E-CHARGER 600

350 kW

150 kW

100 kW

50 kW

The most important technological preconditions for the success of electric mobility include sophisti-cated batteries that guarantee an adequate range and are quick to charge, as well as a comprehen-sive rapid charging infrastructure. Only the upcoming standard known as ‘High Power Charging 2’ (e.g. HPC 250) with a charging capacity of up to 350 kW (DC) is genuinely quick; it allows vehicle batteries to reach a charge of eighty percent in just a few minutes. The rapid charging solution developed by ENERCON already meets this advanced rapid charging standard and is suited for next-generation e-vehicles even now. In addition, ENERCON’s rapid charging solution is not just an electrical load but can contribute to grid stability by providing reactive power as required at the same time. This is an important factor for practice-oriented expansion of the rapid charging infrastructure.

E-Charger 600 for flexible power supply to current and future vehicle types

FAST CHARGING SOLUTION(600 kW SYSTEM POWER)

WIND FARM

ENERCONSYSTEM SUPPLIER FOR RENEWABLE ENERGIES

As a provider of system solutions for renewable energies ENERCON is driving renewable energy supply solutions on a global scale and is involved in technologies of the future such as energy storage, electric mobility and smart grids. It is our goal to provide more added value in relation to our core product, wind energy.

As one of the leading manufacturers of wind energy converters we can draw on more than 30 years of experience in the renewable energies sector. Thanks to their intelligent interface technology, all ENERCON products stand out by their extraordinary level of grid-friendliness.

ENERGY PRODUCTION

ENERGY STORAGE

ENERGY LOGISTICS

H2

CLEVER CHARGING ENERCON E-CHARGER 600

• Smart grid integration technology enables the E-Charger 600 to contribute to the stability of the electric network

• Optional battery energy storage system can be added to reduce impact on electric network

• Each charging point can supply up to 350 kW of power

• Charging at 350 kW leads to significantly reduced charging times

• Charging for a 400 km driving range within just 10 minutes is possible

// CHARGING DURATION

// ELECTRICAL GRID

MODULAR DESIGN: • Central power electronic unit that can be expanded in 60 kW increments to up to 600 kW total power

• Variable distribution of charging power to up to 4 charging points

• Components with proven track record ensure high quality

// CONSTRUCTION

ENERCON FAST CHARGING STATION FOR ELECTRIC VEHICLES

OPTIONSSupport of latest standards for DC charging

ENVIRONMENTAL CONDITIONSAmbient temperature for normal operation -35°C to + 35°C

Ambient humidity 5 % to 95 %

Altitude up to 2,000 m

Sound emission level < 60 dBA

CONTAINER SPECIFICATIONSNominal voltage 400 V AC

Nominal frequency 50/60 Hz

Nominal apparent power 660 kVA

Nominal active power 600 kW

Maximum reactive power up to 500 kVAr

Number of charging points 1 to 4

Efficiency 0,94

Weight < 7 t

CHARGING POINT SPECIFICATIONSCharging standard CCS / CHAdeMO

Connection standard EN61851-23

Connector type Combo-2 / CHAdeMO

Power per charging point up to 350 kW

Charging voltage 200 to 920 V DC

Cable length up to 4 m

Cooled cable optional

COMMUNICATIONCommunication Protocol OCPP 1.6

RFID System optional

Network connection GSM / 3 G Modem, Ethernet

Smart Charging ISO15118

CCS CHAdeMO / CCS

CONTACT: ENERCON GmbH • Energiewirtschaft • Dreekamp 5 • D-26605 Aurich • Phone +49 49 41 - 927 - 131 • emobility@enercon.de

Last updated: 04/2018. Technical information subject to change.TECHNICAL DATA

795 mm703 mm

1920

mm

WEIGHT OF CHARGING POINT:approx. 300 kg

WEIGHT OF CONTAINER:< 7 t

2895

mm

2508 mm 2438 mm