[en] the ultimative guide by fishy

72
Page 1 of 72 The ultimate guide Everything about pvpTool by fishy 0.1 May 5 / 2010 – Began to translate the german guide into english (10h) 0.2 May 20 / 2010 – Translation done. Need some improvements still but readable. (5h) 0.3 August 31 / 2010 – Some Guides removed / Mail Guide added (1h) 0.4 November 21 / 2010 – Updated for Piroxbots Cataclysm (2h) 0.5 November 28 / 2010 – Advanced CommandLine (3h)

Upload: toplvl

Post on 03-Mar-2015

636 views

Category:

Documents


2 download

TRANSCRIPT

Page 1: [en] the Ultimative Guide by Fishy

Page 1 of 72

The ultimate guide Everything about pvpTool

by fishy

0.1 May 5 / 2010 – Began to translate the german guide into english (10h)

0.2 May 20 / 2010 – Translation done. Need some improvements still but readable. (5h)

0.3 August 31 / 2010 – Some Guides removed / Mail Guide added (1h)

0.4 November 21 / 2010 – Updated for Piroxbots Cataclysm (2h)

0.5 November 28 / 2010 – Advanced CommandLine (3h)

Page 2: [en] the Ultimative Guide by Fishy

Page 2 of 72

Any kind of questions, feedback or can be added here

http://www.piroxbots.com/forum/179-allgemein/17255-der-ultimative-guide-feedbackthread.html

Page 3: [en] the Ultimative Guide by Fishy

Page 3 of 72

Table of content

General *Beginning* ................................................................................................................................ 5 *Make a Decision* ..................................................................................................................... 6 *How do I use pvpTool* ............................................................................................................. 8

Example Config................................................................................................................. 11 passIDs One Click.................................................................................................................. 13

*Language Switch* .................................................................................................................. 14 *Important Keys* ..................................................................................................................... 15 *Download profiles and learn how to use them*.................................................................... 16 *Edit profiles out-of-the-box*.................................................................................................. 18 *My pvpTool-Key*.................................................................................................................... 20 *My Key is banned!* ................................................................................................................ 21 *HardwareID* .......................................................................................................................... 22 *The pvpTool Addon* .............................................................................................................. 24 *Command Line* ..................................................................................................................... 25

*Advanced Commandline* .................................................................................................. 26

Basic.................................................................................................................................... 28

*Get specific mobs as your target*.......................................................................................... 29 *How to create your own profiles* ......................................................................................... 30 *How do I ignore Mobs* .......................................................................................................... 40

Elite...................................................................................................................................... 41

*Background Mode* ................................................................................................................ 42 *Correct looting*...................................................................................................................... 44 *PvP with pvpTool* .................................................................................................................. 46 *How to use the FishBot?* ......................................................................................................47 *Useage of the flighmaster* .................................................................................................... 49 *Automatically enchanting* .................................................................................................... 50 *Guildbank in an profile* ......................................................................................................... 52 *Improve profiles* ................................................................................................................... 53 *Mail things to an Alt* ............................................................................................................. 54 *pvpTool with private server* ................................................................................................. 54 *pvpTool with private server* ................................................................................................. 55 *How to activate Elite/Premium*............................................................................................ 56 *Relog function* ...................................................................................................................... 57

Page 4: [en] the Ultimative Guide by Fishy

Page 4 of 72

Premium......................................................................................................................... 58

*2 Profiles at the same time* .................................................................................................. 59 *Spirit healer* .......................................................................................................................... 60 *Premium: Chatting* ............................................................................................................... 61 *Mining/Herbing* .................................................................................................................... 62 *The best way to herb with a druid* ....................................................................................... 65 *Tips* ....................................................................................................................................... 67 *Computer security*................................................................................................................ 68 *Pictures* + *Links* ................................................................................................................. 70 *End*........................................................................................................................................ 72 *And the Oscar goes to …* ......................................................................................................72

Page 5: [en] the Ultimative Guide by Fishy

Page 5 of 72

*Beginning*

My name is fishy and I completely wrote this guide from my own knowledge.

If theres anything I copied out of the forum, I have marked those sources in the end of the

current guide.

If I have made mistakes (in translation or old guides) I am sorry. Please contact me and

report the mistake.

I’m just a human being.

Or maybe a fish(y)?

Page 6: [en] the Ultimative Guide by Fishy

Page 6 of 72

*Make a Decision*

Who am I?

I think there are 2 “groups” of Bot users.

Group A Group B

Farm a few hours a day to buy a new

part of a Set (Gear).

Run the whole night to buy / create new

gems to sell them.

Let the Bot run on a Pet (Ingame Pets)

from time to time, because farming is

annoying.

Let the Bot run the whole night to get

the maximum of gold for the own

usage.

Farm some Gold to buy Flasks etc fort

he raid

Let the Bot run the whole night to get

the maximum of gold to sell it for real

money (possible more then one

account)

As you can see I would call Group A as “Normal user” and G B as “efficient user” (Which

means they wanna know, or know what they do).

Group A – If they receive a ban they would probably cry, because it is their personal account

they have played from the start.

Group B – If they receive a ban they would probably laugh about it and ask themselves

“WTF, why did this happen” – but wont cry.

I’ve created under those explanations a little maths task.

The decision

On which horse should I bet...?

Not every user in Group A would like to have the Premium pack, which is okay, but you

could try it for about a month which will be about 6€. If you like these premium features and

got some “blood on your mouth” then you probably wanna switch to G B. You will know how

to get the maximum of gold within some hours.

Group B should get the complete package – lifetime if you want to do it for along time.

Page 7: [en] the Ultimative Guide by Fishy

Page 7 of 72

Here is a little maths task I created for myself.

plus / Amount minus / time

Ø 50 EUR / Ø 25.000 WoW Gold

- / Ø less then 1 Week*

= Total

50 EUR

- / -

* I’ve got 2 accounts farming in night.

Account:

1 Week = 25.000 Gold x 4 = 100.000 Gold a month.

At a gold price for 2 – 2,5 USD / 1000 Gold (depends on realm and goldbuyer) is that = 200

USD to 250 USD.

As you can see the price of all packages (basic, elite, and premium at lifetime)

have been filled (75euro). Nice, isn’t it?

Information

All those prices depend on your current realm. If it’s a PvP realm for example it can be that

the other faction kill you all the time, which means little gold gained in that time. If you are

on a ‘high population’ realm it would be that you are not the only one who uses a bot, and

then sells things on the AH. This means that there is less gold gained even if you spend more

time.

Page 8: [en] the Ultimative Guide by Fishy

Page 8 of 72

*How do I use pvpTool*

First visit www.piroxbots.com

Login to your account (if didnt happend so far)

Click on “My Products”

Check pvpTool DL & Key

Click on Download.

And you will see something like that:

Once the download is finished [Attention: Disable the virus scanner for this time. It can be

that your virus scanner kills / deletes pvpTool while downloading, which is not very nice!!]

Extract this archive somewhere on your hard drive disk. Eg: *C*:\*Games*\*Whatever*\ * You should rename that folder name^^

Page 9: [en] the Ultimative Guide by Fishy

Page 9 of 72

Then your folder looks like that:

Page 10: [en] the Ultimative Guide by Fishy

Page 10 of 72

After you started your pvpTool you will see this:

In this circle you can choose which faction you play and which profile you want to use.

After you clicked through the GUI you can validate your key so you can start using pvpTool

Add the Key under Options> Main and then click on “Validate Key”.

Now setup your Keys (for the combat etc).

Page 11: [en] the Ultimative Guide by Fishy

Page 11 of 72

Example Config

We choose a setup for our class. E.g. for a Paladin.

Open up your pvpTool, and setup everything in those key fields.

Page 12: [en] the Ultimative Guide by Fishy

Page 12 of 72

It looks more complicated than it is!

Then log in to WoW and do the same (create macros which the input you get from the topic)

For example the “Spam” macro

/castsequence reset=target Crusader Strike, Templar ’s Verdict, Crusader Strike, Crusader Strike

Put the macro somewhere on your actionbar and bind it to a key. For example to “1” (you

have to setup the “1” on First in pvpTool too!)

Do this with every macro.

Page 13: [en] the Ultimative Guide by Fishy

Page 13 of 72

passIDs One Click

This is created by a user of our community: passID. Huge thanks!

OneClick (MacroEdit feature)

All information can be found in the thread (click on the link…).

Page 14: [en] the Ultimative Guide by Fishy

Page 14 of 72

*Language Switch* Currently there are 2 languages supported: German and English. If you like to add a specific Language please contact us on the forums. But for now, I will show you how to switch the language in pvpTool. Switch to Advanced>Gui so you’ll see this:

And as you can see on that Image you can selet „Deutsch“ (which is German) and „English“.

Page 15: [en] the Ultimative Guide by Fishy

Page 15 of 72

*Important Keys*

Interact with target

+

Target last hostile

Which can be setup here:

Page 16: [en] the Ultimative Guide by Fishy

Page 16 of 72

*Download profiles and learn how to use them*

To start off with we search for a profile (oh yes..)

After we have downloaded the profile we need to copy it to our Profiles Folder

Self explanatory, no?!

GoTo (A to B) goes in goto Level profiles in lvl PvP goes in PvP

Page 17: [en] the Ultimative Guide by Fishy

Page 17 of 72

Let pvpTool show the new profiles

Just click on the green arrow.

Done!

Page 18: [en] the Ultimative Guide by Fishy

Page 18 of 72

*Edit profiles out-of-the-box*

Just enable “Dlick Profile to Edit” here:

Then Double click a profile to edit it:

Once it is Double Clicked, something similar to this will appear:

Page 19: [en] the Ultimative Guide by Fishy

Page 19 of 72

Page 20: [en] the Ultimative Guide by Fishy

Page 20 of 72

*My pvpTool-Key*

To find your key (so you can use pvpTool) just visit www.piroxbots.com

Then login into your account.

I have protected my key with a black border. I hope you have your own key. Just add this key under „Options>Main“: 1 = add the Key into the field 2 = click on „Validate Key“

Page 21: [en] the Ultimative Guide by Fishy

Page 21 of 72

*My Key is banned!*

This is the error message you will get when your key is banned

It means that you have to wait 40 minutes until you can use pvpTool again.

Why am I banned?

Maybe you shared your key or someone is using the key at the same time that you want to

use it.

One IP = unlimited instances of pvpTool

But if 2 IPs want use it at the same time it’s a key ban. If you do that too often we (piroxbots)

can ban your key permanently.

Page 22: [en] the Ultimative Guide by Fishy

Page 22 of 72

*HardwareID*

What is the HardwareID?

The HardwareID is a ID from your computer. It is unique to each computer.

With the ID it is then possible that only YOUR computer can use that key.

Where do I find the HardwareID?

Where do I save the HardwareID? In your Forum Account:

Page 23: [en] the Ultimative Guide by Fishy

Page 23 of 72

Scroll down until you see this field. Add there your HardwareID (copy it from that Account Status window).

Restart pvpTool (and save your Profile on the forums) and you’r done.

Page 24: [en] the Ultimative Guide by Fishy

Page 24 of 72

*The pvpTool Addon*

In this Guide I tried to explain you the pvpTool AddOn.

To create the AddOn just switch to Addon>Main of your pvpTool.

The name of the Addon.

Name it whatever you want.

The command to use

pvpTool. Default is “pt” –

which is okay.

Be sure you load out of date AddOns.

This is the name of my AddOn. (Be sure it’s

checked. Checked means that it will be load when

you login to your character)

After you are on your character you can start the AddOn. (The Bot will

check if the AddOn is disabled or not)

If you type in “/pt help” you will see some Commands and explainations of what they do.

Page 25: [en] the Ultimative Guide by Fishy

Page 25 of 72

*Command Line* What is a command line? A command line is for program you want to be started on a specific time or event. This is a small example on how you can use the Command Line. First copy this to a .bat file (no specific name needed. Eg. *bla.bat*) at 10:41 /interactive “startpvpTool.bat”

If you doubleclick that file the CMD windows would show up and do nothing until the time you have added there. For this example its 10:41. So it would start the “startpvpTool.bat” at 10:41. The „startpvpTool.bat“ could look like this: start 2.3.2.8.exe -setup SetupA -profile lvl\1-80\Start.ini -run pve The blue text are parameters, but there are 2 types of it. One is “MUST-HAVE” and the other is “optional”. The orange text are data information (about filenames, setupnames etc).

More Parameters (optional)

-webmonitor Starts the webmonitor after the Bot is running -shutdown HH:MIN shutdown the PC in HH:MM (hours:min) -pausebot HH:MIN pauses the Bot in HH:MM (hours:min) -closewow HH:MIN closes WoW in HH:MIN (hours:min) -hibernate HH:MIN hibernate the PC in HH:MIN (hours:min)

-hearthstone HH:MIN uses the Hearthstone in HH:MM (hours:min) -standby HH:MIN shutdown PC in StandBy-Mode in HH:MIN (hours:min)

-run pve/pvp/pvepvp Starts the Bot in this Modus: pve,pvp or pvepvp

Page 26: [en] the Ultimative Guide by Fishy

Page 26 of 72

*Advanced Commandline* I wanna show you an advanced version of the CommandLine. It supports Multibox, so if you have more than 2 WoW Accounts it’ll save you much time. First get the file here http://fishy.piroxbots.org under „Misc“. Open the file (I suggest you „Notepadd++“) And edit your things:

You can also find an example here:

After you did that, you can start using that „Tool“ by using this .bat Create a new file, name it whatever you want and paste this to it: @echo off start Priest.bat timeout /T 2 > nul start Druide.bat exit Its for Windows Vista + 7, Windows XP users shall use this:

Page 27: [en] the Ultimative Guide by Fishy

Page 27 of 72

@echo off start Priest.bat ping -n 5 127.0.0.1 >nul start Druide.bat exit IMPORTANT: This currently only work on one account. You need to copy that file to use it with 2 accounts. If you copy it another time you can use it with 3 accounts and so on.. (don’t forget to edit the settings and your new created .bat above) However, if you want to use “Ö” and so on, you need to edit them just like that: ä = „ ö = ” Ä = Ž Ö = ™ Ü = š ß = á ü = �

Page 28: [en] the Ultimative Guide by Fishy

Page 28 of 72

Basic

Very useful for beginners.

Page 29: [en] the Ultimative Guide by Fishy

Page 29 of 72

*Get specific mobs as your target*

This does only work with enabled old target system!

If you wanna just farm a specific Mobtype just use this method.

Just use another TargetEnemy Macro.

Before:

/targetenemy

After:

/target Mobname

This way works with the new Target system!

Open the profile and add in “[BeforeStart] this” (like this)

[BeforeStart]

z=IgnoreMob(“Staubteufel”) ; Mob with name “Staubteufel” (german name) will be ignored

z=IgnoreFaction(12) ; Mob with ID 12 will be ignored

z=IgnoreFaction(11) ; ^^^^^^^^^^^^^^^^^^^^^^^^^^^

;z=IgnoreFaction(factionID) ;ignore the faction with that ID EXAMPLE

Page 30: [en] the Ultimative Guide by Fishy

Page 30 of 72

*How to create your own profiles*

Click on me

Profile Maker

Switch to the Profile Maker Tab.

If you have more then 1 WoW window open (even if it’s just the explorer title) you have

choose the right WoW Window. If it’s done, you will see this GUI:

First of all choose a correct profile Name.

Ex: 10-15 Westfall.ini

Settings

Here are some important commands to use:

You can get couple of explanations if you hold your mouse

over the checkbox!

To Start with a profile we just hit the button “Set Waypoint”. To let the bot set an waypoint

Page 31: [en] the Ultimative Guide by Fishy

Page 31 of 72

automaticly just check “Auto Set Waypoint”. WP Distance “15” is a nice value. On an bridge

for example I’ll suggest you to use a smaller value, for eg. “5”.

This is how a profile can look like:

[Profile]

Faction=Both; For Both Factions

DisableSearchTargets=1; 1= on; take enemys as targets

DisableCombat=1; 1=on; the bot can attack enemys

UseFlyMount=0 ;0=off; the bot wont use a flying mount in this profile

[GoTo]

z=UseBuff(); the Bot buff himself and other party members (if in BG)

z=MountingUp(0)

z=Loop()

z=WPX( -9219.217, 180.412, 69.61 ) (Waypoint)

z=WPX( -9207.035, 173.398, 73.083 ) (Waypoint)

z=WPX( -9196.193, 165.004, 73.318 ) (Waypoint)

z=Loop(); End loop

Path

Can contain these

- Normal Way. (A to B)

- Improved Way (A to B to C to A ….)

- [Ghost] Path

Page 32: [en] the Ultimative Guide by Fishy

Page 32 of 72

The normal Way

This is the easiest way. Just run from A to B and back to A.

As you can see in this picture, like a circle.

Page 33: [en] the Ultimative Guide by Fishy

Page 33 of 72

Improved Way

On the guide above the Bot will just run straight in a circle. From time to time this could look

like a Bot.

Just pretend you are a normal Player, and you see another player who runs for ever and ever

the same way. Don’t you think then WTF is he crazy?

In Wow-Language: Botter.

To gain more ways theres a command called “Jump2Path”. Which basicly means if he is at

circle A he can jump2 circle B. (If the waypoints aren’t that far away)

But in fact we need something like a “Hotspot” – a middle way where all waypoints (Path)

can cross in, called an intersection. Look at the image under this and you’ll see what I mean,

the intersection is in red.

Page 34: [en] the Ultimative Guide by Fishy

Page 34 of 72

So we have our Profile then. With the intersection in the middle. To let the Bot choose which

Path he shall use now simply use this command:

z=Jump2Path(“A|B|C”)

This choose randomly which Path he uses now. A, B or C.

[Profile]

Faction=Both

DisableSearchTargets=1

DisableCombat=1

[BeforeStart]

z=UseBuff() (setzt die Buffs)

z=MountingUp() (aufsitzen)

[AfterStart]

z=Jump2Path(“A|B|C”) ;3 Paths

[A]

z=WPX( -8219.217, 180.412, 69.61 )

z=WPX( -4207.035, 173.398, 73.083 )

z=WPX( -9196.193, 165.004, 73.318 )

[B]

z=WPX( -4219.217, 180.412, 69.61 )

z=WPX( -2207.035, 173.398, 73.083 )

(z=WPX( -8196.193, 165.004, 73.318 )

[C]

z=WPX( -1219.217, 180.412, 69.61 )

z=WPX( -7207.035, 173.398, 73.083 )

z=WPX( -6196.193, 165.004, 73.318 )

Page 35: [en] the Ultimative Guide by Fishy

Page 35 of 72

After starting the Bot will choose different paths. Always. (It’s random so it’s secure because

you don’t go the same way for ever and ever)

Ghost Path

To create the Ghost path simply restart the Profile Maker (“New file”) and setup like this:

Run from the GraveYard to your Corpse.

Ps: The body needs to lay down in GoTo path. If its like this

WPs

Graveyard

Body

GoTo

Page 36: [en] the Ultimative Guide by Fishy

Page 36 of 72

It can’t run, because the Body is way outside. (The Bot can’t find the Body)

So be sure if theres more then 1 Graveyard that you put these also inside the profile though.

This is how it will work:

Why ? Because the Bot runs from GoTo Path up ahead. If he cant find your corpse while on GoTo

Path the Bot will pause. Hard to explain for me, sorry. �

This is an default profile:

[Profile]

faction=Both

loot=1

walktoloot=1

[BeforeStart]

z=IgnoreFaction() ;ignore all players

[GoTo]

z=Loop()

z=UseBuff()

;wps

z=Loop()

[Ghost]

;wps

WPs

Graveyard

Body

GoTo

Page 37: [en] the Ultimative Guide by Fishy

Page 37 of 72

Here the Bot will keep running until theres a servercrash or something. ;)

No Vendor, just keep running.

Until the doc calls you, or a GM.

So keep an eye on your profile. I you are a GameMaster at Blizzard, you would act like this: oh, he runs for 2 hours in this

area.The same way, for ever and ever. It is a bot!

So don’t Circle the Bot from A to B, A to B .. For ever and ever.

Page 38: [en] the Ultimative Guide by Fishy

Page 38 of 72

Vendor profile This is how a vendor profile can look like

[Profile]

faction=Both

loot=1

walktoloot=1

[BeforeStart]

z=MountingDown()

z=IgnoreFaction() ;ignore all players

[GoTo]

z=UseBuff()

z=Loop()

z=WPX( 8184.458, -167.916, 853.331, 3, 1, 5 )

..

z=GoToVendor(1) (= 1 means reverse the profile)

z=Loop()

[Vendor]

z=WPX( 8228.417, -169.609, 856.432, 3, 1 )

..

z=WPX( 8445.271, -324.159, 906.978, 4, 1 )

z=MountingDown()

z=WPX( 8443.753, -335.776, 906.608, 4, 1 )

z=UseVendor(“Mag”) (= vendorname)

z=WPX( 8420.481, -362.09, 906.402, 4, 1 )

z=UseVendor(“Horg”) (= vendorname)

z=WPX( 8401.517, -390.799, 902.987, 4, 0 )

z=UseVendor(“Dar”) (= vendorname)

z=WPX( 8390.456, -386.843, 903.049, 4, 1 )

z=WPX( 8407.372, -375.13, 903.119, 4, 1 )

..

[Ghost]

:gy1

z=WPX( 8375.83, -205.999, 840.038, 4, 1 )

..

z=GoToVendor(1) = he runs the [Vendor] Path backwards (reverse).

If you do not want to go to vendor, simply replace the “(1)” with a “(0)”. This will disable it.

Page 39: [en] the Ultimative Guide by Fishy

Page 39 of 72

Here you can choose when the bot shall go to the vendor:

Page 40: [en] the Ultimative Guide by Fishy

Page 40 of 72

*How do I ignore Mobs*

There are 2 ways to ignore mobs.

a) By ID

z=IgnoreFaction(ID)

b) By Name

z=IgnoreMob(Name)

Both have advantages and disadvantages. Here are two:

a)

- Maybe there is a Mobtype who has the same ID

b)

- The name is based off the client. If you play with the enGB client the

name is totally different to the deDE client (for example)

You need to put these Ignore code here:

[Profile]

..

..

[BeforeStart]

z=IgnoreMob(Gnoll)

z=IgnoreFaction(24)

[GoTo]

;WPs

Why is this good?

If you need to kill one single mob type (for a quest for example) it’s great to do this.

Just an

example

“24“ – just

an example

Page 41: [en] the Ultimative Guide by Fishy

Page 41 of 72

Elite

More power for our Bots!

Page 42: [en] the Ultimative Guide by Fishy

Page 42 of 72

*Background Mode*

First you need to bind those 2 keys in WoW and setup them in pvpTool:

Then you need to activate this:

Page 43: [en] the Ultimative Guide by Fishy

Page 43 of 72

If you wish that you dont see your WoW window then I’ll suggest you to use another

desktop. This can be done by the programs here:

DarkDesktop

Page 44: [en] the Ultimative Guide by Fishy

Page 44 of 72

*Correct looting*

All you need to do is check here you chose „MemLooting” or „Interact” – both are nice but

Memory Looting is better. (and secure)

You need to activate CTM:

And these 2 keys:

Page 45: [en] the Ultimative Guide by Fishy

Page 45 of 72

Page 46: [en] the Ultimative Guide by Fishy

Page 46 of 72

*PvP with pvpTool*

Download new profiles, or create your own. Copy them to the correct folder.

Then just choose “World signup BG Mode” – the Bot will do everything by itself:

Page 47: [en] the Ultimative Guide by Fishy

Page 47 of 72

*How to use the FishBot?*

Ingame screen of what it could look like:

The first icon is the skill “Fishing” (from the Spellbook). The second is the lure. The third is

the Rod itself (from the Character window).

You need to bind “Interact with target” in WoW & in pvpTool. Also be sure you activated

AutoLoot in WoW.

Page 48: [en] the Ultimative Guide by Fishy

Page 48 of 72

Then I’ll suggest you to run the Fishbot by Memory. Its 100% secure atm. If not you will see a

message:

Isnt the memory based Bot dangerous?

No its not. It’s just dangerous if you Bot the whole night in a town, or the whole night in

Wintergrasp for example. But for 3 hours it’s not dangerous.

Ad/Disadvantages?

Advantages of Memory:

- 100% Loot successrate

- Looks nice to other people (like a real player)

Disadvantages of Memory:

- uses memory writing (no injection!)

Advantages of Color:

- Warden Safe. It uses simply pixelsearching.

Disadvantages of Color:

- No Loot successrate. It can work, or not. (Depends on weather, night

and sun and and and..)

Page 49: [en] the Ultimative Guide by Fishy

Page 49 of 72

*Useage of the flighmaster*

To use the flighmaster use this code:

z=UseNPC("Name of Flighmaster ") z=ClipboardPut ("/click TaxiButton11") z=SendIt("{Enter}") z=SleepIt(1000) z=SendIt("^{v}", 1) z=SleepIt(1000) z=SendIt("{Enter}")

To get the ID of the flighpath its simple do this:

1) Create a new Macro with this input:

/run ChatFrame1:AddMessage(GetMouseFocus():GetName())

3) Bind it to a key

4) Hold the mouse over the flighpath and press that button

5) in the Chat there is now something like this: Flighpath XX

X= the ID

Good to do that when you want to use two Spots (Farming).

Page 50: [en] the Ultimative Guide by Fishy

Page 50 of 72

*Automatically enchanting*

Hey,

Today I want to show u how to Disenchant items, automatically with no input.

Things you will need:

- Auctioneer (Enchantrix)

- The Profile (below)

- 5min

So.. Now load this Addon from here for example:

TUhttp://auctioneeraddon.com/?p=homeUTH

or from curse HTUCurse *click me*UTH

Lets Go:

/script Enchantrix.Settings.SetSetting('AutoDisench antEnable', not Enchantrix.Settings.GetSetting('AutoDisenchantEnabl e'))

Get this under „UserVar1“.

Then this

/click AutoDEPromptYes

Into UserVar2. Now let the Profile below run.

Page 51: [en] the Ultimative Guide by Fishy

Page 51 of 72

Profil: [Profile] faction=Both StartPath=GoTo [GoTo] z=J2PIf(ReadVar("fSondieren", 1), 1, "Run") z=SendChat($Ini_UserVar1) z=SetVar("fSondieren", 1, 1) z=Jump2Path("Run") [Run] z=SendChat($Ini_UserVar2) z=SleepIt(2600,2800) z=Jump2Path("Run")

Page 52: [en] the Ultimative Guide by Fishy

Page 52 of 72

*Guildbank in an profile*

http://www.piroxbots.com/forum/60-guides/18816-advanced-guild-vault-depositing-current-zone-back-background-mode.html

Page 53: [en] the Ultimative Guide by Fishy

Page 53 of 72

*Improve profiles*

To not look like „OMG I am a Bot” it’s smart to use the jump2path

We can use Jump2Path!

z=Jump2Path(“Way1|Way2|Way3”)

The bot can choose 3 different ways. Its randomly.

[GoTo]

z=Jump2Path(„Way1|Way2|Way3”)

[Way1]

;wps

[Way2]

;wps

[Way3]

;wps

[Ghost]

;wps

Here you can get a list of all commands

This is how an Arathi Basin Profile could look like:

..

After start the Bot can choose 3 different Paths: AfterStart1, AfterStart2 or AfterStart3).

Up there you can start thinking: let him go to the mine, to the stables or somewhere else.

[Profile]

bg=Arathi

faction=Alliance

[BeforeStart]

z=UseBuff()

z=WP( 1300.041, 1298.333, 3, 1 )

z=WP( 1286.77, 1284.061, 3, 1 )

z=MountingUp()

[AfterStart]

z=Jump2Path(“AfterStart1|AfterStart2|AfterStart3”)

[AfterStart1]

z=Jump2Path(“xy”)

[AfterStart2]

z=Jump2Path(“xy”)

[Afterstart3]

z=Jump2Path(“xy”)

Page 54: [en] the Ultimative Guide by Fishy

Page 54 of 72

*Mail things to an Alt*

In this Guide I’d like to show you how to mail things to an alt. What does that mean and for what is it nice to have? Well.. if you farm all night long I am very sure your inventory gets full. So there we go. We could implement a part in the profile where all my stuff gets to my Bankalt for eg. Lets go! Get to “Main>Vendor” and add there your information.

1) Add your bank alts name to “Mail to:” 2) Check everything what you want to send it to this Alt below.

Of course you can add names of Object/Items to a list which will be send to your alt too. Add it in that textbox and check if you have “Enable” enabled. Usage in a profile: [GoTo] z=Loop() ;farm wps z=GoToVendor() z=Loop() [Vendor] ;Vendor WPXs z=UseMailbox()

Picutures made by

rainamnkk

Page 55: [en] the Ultimative Guide by Fishy

Page 55 of 72

*pvpTool with private server*

You need 2 things to Bot on a private server with pvpTool:

a) *Basic*

and/or

b) *Elite*

Patches?

With Basic it is possible to Bot on a 2.4.3 server. With Elite everything is possible, from 2.4.3

to present WoW Patch.

1) Then open pvpTool and switch to Advanced>Main

Choose your WoW Patch

3) Save the current setup (“Save”-Button)!

Tip:

If you bot on Blizzard Realm and on a Private Server; simply use 2 configs, so you can’t get

confused.

Page 56: [en] the Ultimative Guide by Fishy

Page 56 of 72

*How to activate Elite/Premium*

If you bought Elite/Premium you can activate pvpTool this way:

Enter your key (didnt change at upgrading!)

Click on Validate Key.

After the Key is validated your can use the Elite/Premium functions.

Page 57: [en] the Ultimative Guide by Fishy

Page 57 of 72

*Relog function*

How to use the Relog function? It’s easy.

Simple set your account name + password, bnet wowacc position and character position.

pvpTool will find the realmname by itself.

Don’t forget to set the “Action” functions to “Relog”.

! We are not going to harm you in any way.

We do not steal your account data. If you

don’t trust us, simply don’t use this feature

or save your WoWAcc name in WoW and

just set the password.

Page 58: [en] the Ultimative Guide by Fishy

Page 58 of 72

Premium

Contains more powerful features for pvpTool eg Gathering, Chatting (secure Botting) and

more in Future.

Page 59: [en] the Ultimative Guide by Fishy

Page 59 of 72

*2 Profiles at the same time*

Open your pvpTool.

And select a LVL Profile and a Battleground on the left. Then click on “Run lvl and Pvp”.

Thats it.

Page 60: [en] the Ultimative Guide by Fishy

Page 60 of 72

*Spirit healer*

If you want to wait X (time) after the spirit healer saved you simply add this to the profile:

[Spirithealer]

z=UseBuff()

z=Jump2Path(“Wait”)

[Wait]

z=SleepIt(5000)

z=MountingUp()

z=SleepIt(1000)

z=SendIt(“SPACE down”)

z=SleepIt(4000)

z=SendIt(“SPACE up”)

z=AntiAfk(600000, 0, 0,

601000)

z=Jump2Path(“GoTo”)

Credits go to

“onkelfrisko“!

Page 61: [en] the Ultimative Guide by Fishy

Page 61 of 72

*Premium: Chatting*

Go to MSGs>Chatting:

And edit the functions to whatever you want.

Create a new wordlist Open the wordlist.ini and add a new Path. Here it’s called [My Wordlist]

[My Wordlist]

(Here comes the wordlist)

[Example wordlist]

hi|there=hi sure|hi yes

whisper/hi=hi

whisper/hi,muh=hi whats up;<-- the bot will never reach this check, because 'whisper/hi=hi'

will be used!!!!

*=hohoho ;<-- the bot will replies this on each chat message, because filter = * allows all…

To get information just open the wordlist.ini – examples + more can find inside the file!

If you click on this

button you can edit

the selected wordlist.

Page 62: [en] the Ultimative Guide by Fishy

Page 62 of 72

*Mining/Herbing*

Just edit the settings I highlighted.

3) If it is a flighmount Profile be sure you set a flying mount key!

Page 63: [en] the Ultimative Guide by Fishy

Page 63 of 72

4) Set

And

Page 64: [en] the Ultimative Guide by Fishy

Page 64 of 72

5) Choose a profile

6)

Page 65: [en] the Ultimative Guide by Fishy

Page 65 of 72

*The best way to herb with a druid*

Druids have the capacity to herb even in their other forms, here I show how it can be used in

pvpTool.

First, the set the following keys:

You will find Move Down here:

You need Move Down + Flying Mount

Key.

As a Druid you don’t have a Casttime

if you morph into another form.

If you use a normal mount the Casttime

should be 2000.

Page 66: [en] the Ultimative Guide by Fishy

Page 66 of 72

We Use MemLooting as the lootmethod because it is the best choice:

And change de object distance.

For a ground profile 60 is nice. For a flying profile 200+ is needed.

Page 67: [en] the Ultimative Guide by Fishy

Page 67 of 72

*Tips*

Tip 1

If you like your Account don’t bot 24h 7days a week!

Tip 2

• Rename your Folder to anything other than “pvpTool”.

• Don’t let the Bot run 5hours straight with one profile! (Tip: use jump2path)

• Always keep your eyes on the Bot. (Babysit it)

• Create your own profiles

• Always keep your eyes on Logs and Screenshots (Player Whisper)

Tip 3

Rename the pvpTool Addon

Wrong = Bot Addon, Bot, Blizzard, Schneesturm, 2 Squares help me..

Right = Questhelper, Quest!, AtlasExt...

Tip 4

If you create your own profiles always think about what other player will see. (Hours and

hours the same way …)

Tip 5

Don’t use the Fishbot A WHOLE NIGHT. Seriously.^^

Page 68: [en] the Ultimative Guide by Fishy

Page 68 of 72

*Computer security*

Information

How can a ‘Hacker’ steal my account data?

a) Filesharing (P2P,Torrent, eMule, Rapidshare)

b) “Friends” who sent you “a nice tool”

c) AddOns.

d) Trojan (PleaseClickMe.exe)

Filesharing

If you are in a P2P network (Peer to Peer) you always can get a virus. You can hide a

malicious tool in quite a lot of things, like games, crack versions of software... What happens

if you execute a file which contains a virus?

Well... Then a Trojan will be activated (or delayed so you don’t notice) and search for

account specific data on your computer.

Friends

Nice if you have friends. But maybe some of them have an Evil “Friend” inside. Maybe they

create a virus and just want to fuck you off.

If you get a virus from your friend he can steal any data he wanted to.

AddOns

Yep. Many AddOns CAN contain viruses. (Some of them can contain LUA code which steals

your account data).

Check every AddOn before you install an AddOn.

Trojaner

You can find them all over the internet and they are the main method of stealing your

account data, although they usually will steal your credit and bank account details!!

Page 69: [en] the Ultimative Guide by Fishy

Page 69 of 72

Disclaimer We (piroxbots) don’t want harm you in any way. We don’t use injection in our software; we

don’t use Trojans or something like that ever, and won’t ever use something like that.

Page 70: [en] the Ultimative Guide by Fishy

Page 70 of 72

*Pictures* + *Links*

Our (both) auth servers are currently not available - please be patient until they can

contacted again.

It could be your internet connection too. Or you use a proxy server...

Page 71: [en] the Ultimative Guide by Fishy

Page 71 of 72

FAQ *click*

(By PiroX and Jackson and fishy)

Waiting for updates thx to nitsud7294

Page 72: [en] the Ultimative Guide by Fishy

Page 72 of 72

*End*

Thank you for reading. It took so much time to create this guide (in fact, it was just translation, but hey!) – I have to

update both Guides if everything needs to be updated. So ;P please say “thank yoooouu! ;P”

*And the Oscar goes to …*

PiroX

Thank you for the wonderful Bot!

Thanks for everything!

Thanks for the nice conversation in teamspeak, ICQ, or via SMS ☺

Team

Sizzla, dergringo, m0x, mirko2002, trollp, Krateos, jazerix, Caniz, BotOperator

Thanx!

Thanks goes to PiroX, jidgo, Caniz, zutto and a lot of other

members. It’s so much fun with you in this forum!