en-ss-1227 railway products for great...
TRANSCRIPT
ELECTRIFIED RAILWAYSProduct Catalogue
Transportation Infrastructure Solutions
Supporting, Protecting, Terminating
and Splicing High Performance
Solutions for Railway Infrastructure.
G
R E AT B RITAIN
Distribution-Grip Dead-end
Description
PLP helical fi ttings are used across the rail network to terminate and protect conduc-tors used in Overhead Line Electrifi cation (OLE).
Conductor Dead-Ends and Distribution
The PREFORMED™ Grips and Dead-ends are used for terminating conductors used in OLE construction. The Grips and Dead-Ends are made from compatible materials for the aluminium or copper based conductors upon which they will be used. Lay direction must be the same as that of the outer stranding of the conductor to which it is applied.
PLP® Railway Products
Helical Fittings for use on UK Rail Infrastructure
World Headquarters660 Beta DriveCleveland, Ohio 44143
Mailing Address:Preformed Line Products Great Britain Ltd.East Portway Andover EnglandSP10 3LH01264 366234
Telephone: 440.461.5200Fax: 440.442.8816Web Site: www.preformed-gb.com
© 2017 Preformed Line ProductsPrinted in U.S.A.EN-SS-122708.17.IH
Conductor Dead-Ends / Line Guards / Patch Rods
PLP CatalogueNumber
Network Rail Drawing
PADS Material number
Conductor Type Description
CDE 1103016R 121 091 005 0091/011682 Copper Conductor Dead-end 10.54 dia.
CDE 5515012R 121 091 011 0091/012093 Copper Conductor Dead-end 15.88 - 16.25 dia.
PR 2305931R 91/11326/1 0091/011326 Copper Patch Rod Brass 6.30 - 6.49 dia.
PR 2305949R 91/11582/1 0091/011582 Copper Patch Rod Brass 10.29 - 10.56 dia.
LG 2205819R 121 094 011 0091/012116 Copper Line Guard Brass 8.97 - 9.46 dia.
LG 5520006R 121 094 003 0091/011990 Copper Line Guard Brass 10.39 - 10.81 dia.
SPELG 5520001R 121 094 016 0091/011998 Copper Special Line Guard Brass 10.39 - 10.81 dia.
Line Guards
Patch Rods
Line Guards and Patch Rods
PLP Line Guards are intended to protect conductors/strands against bending, com-pression, abrasion and arc over damage and to provide restorative repair. The de-gree of protection needed on a specifi c line depends upon a number of factors such as, line design, temperature, tension, exposure to wind fl ow and vibration history on similar construction in the same area.
Patch Rods are designed to restore full conductivity and mechanical strength to conductors/strands where damage does not exceed 25% of the outer strand layer.
Distribution-Grip Dead-Ends
PLP Catalogue Number
Network Rail Number
PADS Material number
Conductor Type Description
DDE 5011725R 121 091 012 0091/012092 Aluminium Distribution-Grip 24.08 - 27.22 dia.
DDE 5115702R 121 091 002 0091/011181 Aluminium Distribution-Grip 14.68 - 16.59 dia.
DDE 5115710R 121 091 001 0091/011180 Aluminium Distribution-Grip 11.76 - 12.24 dia.
DDE 5115714R 121 091 003 0091/011182 Aluminium Distribution-Grip "COCKROACH"
LG 5320001R 121 094 001 0091/011266 Aluminium Line Guard Aluminium 11.79 - 12.46 dia.
LG 5320002R 121 094 002 0091/011267 Aluminium Line Guard Aluminium 11.79 - 12.46 dia.
LG 2005628R 121 094 013 0091/046044 Aluminium Line Guard Aluminium 16.03 - 16.65 dia.
LG 2005632R 121 094 014 0091/046045 0 Aluminium Line Guard Aluminium 18.82 - 20.13 dia.
LG 2005638R 121 094 015 0091/011271 Aluminium Line Guard Aluminium 25.83 - 27.04 dia.
Always check the PADSnet Database for current part numbers and revision status.
Brass Patch Rods
NOTES:• Where the catalogue denotes a PADS number,
the parts have approval from network rail.• PREFORMED™ line fi ttings should not be used
as tools and are designed for single use only.