embedded designer's forum 2009 rev 1 mrf49xa
DESCRIPTION
Embedded designer forum in Hungary 2009.TRANSCRIPT
![Page 1: Embedded Designer's Forum 2009 Rev 1 MRF49XA](https://reader034.vdocuments.us/reader034/viewer/2022042717/55cf9bd6550346d033a78e69/html5/thumbnails/1.jpg)
“Taking the RF out of Wireless”
![Page 2: Embedded Designer's Forum 2009 Rev 1 MRF49XA](https://reader034.vdocuments.us/reader034/viewer/2022042717/55cf9bd6550346d033a78e69/html5/thumbnails/2.jpg)
Typical problems of a wireless application designer
Need to solve Common Alternatives– Hire RF Consultant ?
– Buy expensive equipments and calibrate every units ?
– Use larger battery pack ?
– Spend lot of development time with uncertain results ?
– Design automatic calibration ?
– Output RF matching
– Eliminate TX/RX offset
– Keep Battery life in hand
– Lowest time to market
– Expensive production tuning
![Page 3: Embedded Designer's Forum 2009 Rev 1 MRF49XA](https://reader034.vdocuments.us/reader034/viewer/2022042717/55cf9bd6550346d033a78e69/html5/thumbnails/3.jpg)
Global ISM Bands
2.4GHz is the Worldwide Standard
![Page 4: Embedded Designer's Forum 2009 Rev 1 MRF49XA](https://reader034.vdocuments.us/reader034/viewer/2022042717/55cf9bd6550346d033a78e69/html5/thumbnails/4.jpg)
MRF49XASub-GHz Transceiver
Feature Highlights433/868/915 MHz Support with FSK ModulationFully integrated (low BOM, easy design-in) Fast-settling, programmable, high-resolution PLL synthesizer Integrated power amplifier (+7 dBm Tx pwr)High receiver sensitivity ( -110 dB)Analog and digital RSSI outputs Automatic frequency control (AFC) 2.2 – 3.8V operating voltageLow Power Consumption, Standby Current 0.3uACompact 16-pin TSSOP package
ApplicationsAMR - Remote meter readingHome, Building, Industrial AutomationRKE and Tire Pressure MonitoringPOS, Toy, and HID
AvailabilityAvailable Now atwww.microchipdirect.com
![Page 5: Embedded Designer's Forum 2009 Rev 1 MRF49XA](https://reader034.vdocuments.us/reader034/viewer/2022042717/55cf9bd6550346d033a78e69/html5/thumbnails/5.jpg)
Certified RF Transceiver Module Reference Design –IN DEVELPOMENT
Module features:Microchip’s MRF49XA 868/915 MHz transceiver Integrated PCB antennaMatching circuit componentsFCC (U.S.A.), IC (Canada), and ETSI (Europe) compliantSurface-mountable PCBReceiver Sensitivity -110 dBm
Supports Microchip Wireless stacks:
MiWi™ and MiWi P2P
Similar in Design to the MRF24J40MASame Foot Print
Same size
![Page 6: Embedded Designer's Forum 2009 Rev 1 MRF49XA](https://reader034.vdocuments.us/reader034/viewer/2022042717/55cf9bd6550346d033a78e69/html5/thumbnails/6.jpg)
MRF49XA Main Parameters
No external antenna switch needed2 x 8-bit Transmit register16-bit Receive RegisterAutomatic antenna tuningNo external RF parts (excl. 10 MHz quartz crystal and balun)
![Page 7: Embedded Designer's Forum 2009 Rev 1 MRF49XA](https://reader034.vdocuments.us/reader034/viewer/2022042717/55cf9bd6550346d033a78e69/html5/thumbnails/7.jpg)
MRF49XA Architectural Diagram
![Page 8: Embedded Designer's Forum 2009 Rev 1 MRF49XA](https://reader034.vdocuments.us/reader034/viewer/2022042717/55cf9bd6550346d033a78e69/html5/thumbnails/8.jpg)
Standard SPI Operation
Simple SPI based communication:Setup the RF parameters
Frequency Band selectDeviation, BBW, etc…
Control the power saving modesEnable / Disable internal blocks
Read / write data in FIFO modeDirect RX FIFO access
![Page 9: Embedded Designer's Forum 2009 Rev 1 MRF49XA](https://reader034.vdocuments.us/reader034/viewer/2022042717/55cf9bd6550346d033a78e69/html5/thumbnails/9.jpg)
Data Transmitting (Using TX Register)
Internal bit rate generator:300 bps – 115 kbps
MCU communication:Standard SPI command to access TX registerInterrupt driven MCU routines
Advantages:Less load of the MCULower clock rate for the MCU -> save battery
![Page 10: Embedded Designer's Forum 2009 Rev 1 MRF49XA](https://reader034.vdocuments.us/reader034/viewer/2022042717/55cf9bd6550346d033a78e69/html5/thumbnails/10.jpg)
Data Receiving (Using RX Register)
Advantages:Significantly less load on the MCUAutomatic frame synchronization MRF49XA
PICMCU
SPI pins
nIRQ
nFFS (optional)
• RX Register is automatically filled with the received data • RX Synchronous Pattern Recognition• FIFO Interrupt if new data available in RX Register• Data can be read by standard SPI command
![Page 11: Embedded Designer's Forum 2009 Rev 1 MRF49XA](https://reader034.vdocuments.us/reader034/viewer/2022042717/55cf9bd6550346d033a78e69/html5/thumbnails/11.jpg)
Keep Battery Life in hand
What affects battery life ?Radio chip related parameters
Current consumption in different operating modesMicrocontroller related parameters
Current consumption in different operating modesProtocol related parameters
Bit rateFrame size
Battery capacity
![Page 12: Embedded Designer's Forum 2009 Rev 1 MRF49XA](https://reader034.vdocuments.us/reader034/viewer/2022042717/55cf9bd6550346d033a78e69/html5/thumbnails/12.jpg)
How does the radio chip help to extend battery life?
Special mode of operation of the receiver (Low-Power Duty Cycle Mode):
MRF49XA periodically wakes up and scans the air and wakes up the microcontroller only if needed.MCU doesn’t wake up unless a valid packet arrives (noise doesn’t cause the micro to wake up!)Note:
• Time base is from the internal wake-up timer (1.5uA)
• Sleep and scan periods are programmable in wide range (from 1ms to more than days)
![Page 13: Embedded Designer's Forum 2009 Rev 1 MRF49XA](https://reader034.vdocuments.us/reader034/viewer/2022042717/55cf9bd6550346d033a78e69/html5/thumbnails/13.jpg)
Receiver Low Power Duty Cycle Mode
![Page 14: Embedded Designer's Forum 2009 Rev 1 MRF49XA](https://reader034.vdocuments.us/reader034/viewer/2022042717/55cf9bd6550346d033a78e69/html5/thumbnails/14.jpg)
MRF49XADevelopment Boards
MRF49XA PICtail™/PICtail Plus Daughter Boards
Part # AC164137-1 (433 MHz),Part # AC164137-2 (868/915 MHz)
Explorer 16 Dev BoardPart # DM240002
![Page 15: Embedded Designer's Forum 2009 Rev 1 MRF49XA](https://reader034.vdocuments.us/reader034/viewer/2022042717/55cf9bd6550346d033a78e69/html5/thumbnails/15.jpg)
MRF49XA Radio Utility Program
RF link configurationTransmit modeReceive modePing-Pong andPER testDownloadablefrom WEB soon
![Page 16: Embedded Designer's Forum 2009 Rev 1 MRF49XA](https://reader034.vdocuments.us/reader034/viewer/2022042717/55cf9bd6550346d033a78e69/html5/thumbnails/16.jpg)
Design Resources on WEB
AN1252 - Interfacing the MRF49XA Transceiver to PIC Microcontrollers AN1283 - Microchip Wireless (MiWi) Media Access Controller - MiMACAN1284 - Microchip Wireless (MiWi) Application Programming Interface - MiAppMRF49XA Demo Application MRF49XA PICtail/PICtail Plus Daughter Board User's Guide
![Page 17: Embedded Designer's Forum 2009 Rev 1 MRF49XA](https://reader034.vdocuments.us/reader034/viewer/2022042717/55cf9bd6550346d033a78e69/html5/thumbnails/17.jpg)
TrademarksThe Microchip name and logo, the Microchip logo, dsPIC, KeeLoq, KeeLoq logo, MPLAB, PIC, PICmicro, PICSTART, rfPIC and UNI/O are registered trademarks of Microchip Technology Incorporated in the U.S.A. and other countries.FilterLab, Hampshire, HI-TECH C, Linear Active Thermistor, MXDEV, MXLAB, SEEVAL and The Embedded Control Solutions Company are registered trademarks of Microchip Technology Incorporated in the U.S.A.Analog-for-the-Digital Age, Application Maestro, CodeGuard, dsPICDEM, dsPICDEM.net, dsPICworks, dsSPEAK, ECAN, ECONOMONITOR, FanSense, HI-TIDE, In-Circuit Serial Programming, ICSP, ICEPIC, Mindi, MiWi, MPASM, MPLAB Certified logo, MPLIB, MPLINK, mTouch, nanoWatt XLP, Omniscient Code Generation, PICC, PICC-18, PICkit, PICDEM, PICDEM.net, PICtail, PIC32 logo, REAL ICE, rfLAB, Select Mode, Total Endurance, TSHARC, WiperLock and ZENA are trademarks of Microchip Technology Incorporated in the U.S.A. and other countries.SQTP is a service mark of Microchip Technology Incorporated in the U.S.A.All other trademarks mentioned herein are property of their respective companies.© 2009, Microchip Technology Incorporated, Printed in the U.S.A., All Rights Reserved.