electricity and the devices that carry it.. power electricity and the devices that carry it. rules...
TRANSCRIPT
Electricity and the devices that carry it.
POWER
Electricity and the devices that carry it.
Rules of Lighting Design Law of Reflection Law of Refraction Inverse Square Law POWER FORMULA
Electricity
Electricity Watts -- Measurement of power
required to do work We often measure the amount
of Electricity we use in watts. Amps (Amperes) –
Measurement of the flow of electrons (capacity)
Volts –Measurement of electrical potential (push)
Electricity
Power Formula Is: P= IE But my favorite is: W=VA Watts = Volts(Amps)
Electricity
Amperage is the measurement of electrical flow and is dictated by the capacity of the electrical devices we use.
Everything has a capacity.
Dimmers, Lights, Lamps, And . . .
CABLE!!!
Electricity
Cable Gage is Very Important. We use 12 Gage Cable in the
Theatre. It’s actually 12/3 cable. (that’s 12 gage, 3 wire) 12 Gage has a capacity of 20A Other gages have other capacities
(there’s a chart on page 81 of your book).
Stage Pin Connectors
Hot = or Red Neutral = White Ground = Green
http://www.d.umn.edu/~mharvey/th1501connectors.html
Electricity
So using this formula, let’s calculate some situations.
How Many Cables? How many 12/3 Cables do you need
to connect the following lamps? 3 – 1000w (or 1K) 5 – 750w 2 – 500w 3 – 250w Please show your work!
How Many Cables?
How many 12/3 Cables do you need to connect the following lamps?
2– 1000w (or 1K) 3 – 750w 5– 500w 3 – 250w 6 – 100w Please show your work!