electrical-engineering-portal.comhttp://electrical-engineering-portal.com/uk-electrical-industry-british-standards-bs

Brit ish Standards (BSI)

UK Electrical Industry British Standards (BS)

These standards are the whole of the prescript ions on the basis of which machines, apparatus,materials and the installat ions should be designed, manufactured and tested so that ef f iciencyand funct ion safety are ensured – and all according to the UK Electrical Industry Brit ishStandards (BS).

The technical standards, published by BS, are circumstant ially drawn up and can have legalforce when this is at t ributed by a legislat ive measure.

British Standards (BS) – The List

BS 88-2Published 2007Low-voltage fuses: Supplementary requirements for fuses for use by authorized persons(fuses mainly for industrial applicat ion). Examples of standardized systems of fuses A to I

BS 88-3Published 2007Low-voltage fuses: Supplementary requirements for fuses for use by unskilled persons (fusesmainly for household or similar applicat ions). Examples of standardized systems of fuses A to F

BS 4363Published 1998, Conf irm Date 01 December 2007Specif icat ion for distribut ion assemblies for reduced low voltage electricity supplies forconstruct ion and building sites

BS 4737-3.2Publicat ion Date 31 May 1977, Conf irm Date 01 November 2007Intruder alarm systems. Specif icat ions for components. Foil on glass

BS 4737-3.3Publicat ion Date 31 May 1977, Conf irm Date 01 November 2007Intruder alarm systems. Specif icat ions for components. Protect ive switches

BS 4737-3.5Publicat ion Date 30 November 1978, Conf irm Date 01 November 2007Intruder alarm systems. Specif icat ions for components. Ult rasonic movement detectors

BS 4737-3.6Publicat ion Date 30 November 1978, Conf irm Date 01 November 2007Intruder alarm systems. Specif icat ions for components. Acoust ic detectors

BS 4737-3.8Publicat ion Date 29 December 1978, Conf irm Date 01 November 2007Intruder alarm systems. Specif icat ions for components. Volumetric capacit ive detectors

BS 4737-3.9Publicat ion Date 30 November 1978, Conf irm Date 01 November 2007Intruder alarm systems. Specif icat ions for components. Pressure mats

BS 4737-3.10Publicat ion Date 30 November 1978, Conf irm Date 01 November 2007Intruder alarm systems. Specif icat ions for components. Vibrat ion detectors

BS 4737-3.12Publicat ion Date 30 November 1978, Conf irm Date 01 November 2007Intruder alarm systems. Specif icat ions for components. Beam interrupt ion detectors

BS 4737-4-3Publicat ion Date 30 December 1988, Conf irm Date 01 November 2007Intruder alarm systems in buildings. Codes of pract ice. Code of pract ice for exterior alarmsystems

BS 4737-5.2Publicat ion Date 31 August 1988, Conf irm Date 01 November 2007Intruder alarm systems. Terms and symbols. Recommendat ions for symbols for diagrams

BS 5266-1(replaces BS 5266-1:2005, BS 5266-10:2008)Publicat ion Date 30 November 2011Emergency light ing. Code of pract ice for the emergency light ing of premises

BS 5266-4Publicat ion Date 15 July 1999, Conf irm Date 01 February 2004Emergency light ing. Code of pract ice for design, installat ion, maintenance and use of opt icalf ibre systems

BS 5308-1Publicat ion Date 28 November 1986, Conf irm Date 01 November 2005Instrumentat ion cables. Specif icat ion for polyethylene insulated cables

BS 5308-2Publicat ion Date 28 November 1986, Conf irm Date 01 November 2005Instrumentat ion cables. Specif icat ion for PVC insulated cables

BS 5467Publicat ion Date 15 October 1997 +A3:2008Electric Cables: Thermosett ing insulated, armoured cables for voltages of 600/1000V and1900/3300V

BS 5839-1Publicat ion Date 15 October 2002 +A2:2008Fire detect ion and f ire alarm systems for buildings. Code of pract ice for system design,installat ion, commissioning and maintenance

BS 5839-3Publicat ion Date 29 April 1988 (Conf irm Date 01 October 2008)Fire detect ion and alarm systems for buildings. Specif icat ion for automat ic release mechanismsfor certain f ire protect ion equipment

BS 5839-6Publicat ion Date 15 September 2004Fire detect ion and f ire alarm systems for buildings. Code of pract ice for the design, installat ionand maintenance of f ire detect ion and f ire alarm systems in dwellings

BS 5839-8Publicat ion Date 30 May 2008 (Replaces BS 5839-8:1998)Fire detect ion and f ire alarm systems for buildings. Code of pract ice for the design, installat ion,commissioning and maintenance of voice alarm systems

BS 5839-9Publicat ion Date 31 January 2011

Fire detect ion and alarm systems for buildings. Code of pract ice for the design, installat ion,commissioning and maintenance of emergency voice communicat ion systems

BS 6004(Partially replaced by BS EN 50525-1:2011 BS EN 50525-2-31:2011 and BS EN 50525-2-51:2011)Publicat ion Date 15 December 2000, Conf irm Date 01 May 2006Electric cables. PVC insulated, non-armoured cables for voltages up to and including 450/750 V,for electric power, light ing and internal wiring

BS 6007(Replaced by BS EN 50525-1:2011 BS EN 50525-2-41:2011 and BS EN 50525-2-42:2011 butremains current)Publicat ion Date 17 February 2006Electric cables. Single core unsheathed heat resist ing cables for voltages up to and including450/750 V, for internal wiring

BS 6266Publicat ion Date 31 August 2011Fire protect ion for electronic equipment installat ions. Code of pract ice

BS 6231Publicat ion Date 31 July 2006Electric cables: Single core PVC insulated f lexible cables of rated voltage 600/1000 V forswitchgear and controlgear wiring

BS 6387Publicat ion Date 15 January 1994, Conf irm Date 01 October 2005Specif icat ion for performance requirements for cables required to maintain circuit integrityunder f ire condit ions

BS 6396Publicat ion Date 25 July 2008Electrical systems in of f ice furniture and of f ice screens. Specif icat ion

BS 6485Publicat ion Date 15 February 1999, Conf irm Date 01 October 2005PVC-covered conductors for overhead power lines

BS 6622Publicat ion Date 30 March 2007Electric cables: Armoured cables with thermosett ing insulat ion for rated voltages from 3.8/6.6kV to 19/33 kV. Requirements and test methods

BS 6651

Publicat ion Date 15 September 1999, withdrawn 31 August 2008, Replaced by BS EN62305:2006Code of pract ice for protect ion of structures against lightning

BS 6724Publicat ion Date 15 September 1997, +A3:2008Electric cables: Thermosett ing insulated, armoured cables for voltages of 600/1000 V and1900/3300 V, having low emission of smoke and corrosive gases when af fected by f ire

BS 7211(Partially Replaced by BS EN BS EN 50525-1:2011 and BS EN 50525-3-41:2011)Publicat ion Date 15 October 1998, Conf irm Date 01 October 2005Electric cables. Thermosett ing insulated, non-armoured cables for voltages up to and including450/750 V, for electric power, light ing and internal wiring, and having low emission of smoke andcorrosive gases when af fected by f ire

BS 7346-6(Replaced By BS 8519:2010)Publicat ion Date 31 March 2005Components for smoke and heat control systems. Specif icat ions for cable systems

BS 7375Publicat ion Date 15 November 1996Code of pract ice for distribut ion of electricity on construct ion and building sites

BS 7430Publicat ion Date 15 November 1998Code of pract ice for earthing

BS 7629-1Publicat ion Date 15 April 1997, Conf irm Date 01 August 2007Specif icat ion for 300/500 V f ire resistant electric cables having low emission of smoke andcorrosive gases when af fected by f ire. Mult icore cables

BS 7671:2008 +A1Publicat ion Date 01 July 2011Requirements for electrical installat ions. IEE Wiring Regulat ions. Seventeenth edit ion

BS 7767Publicat ion Date 15 July 1994Method for assessing the short-circuit withstand strength of part ially type-tested assemblies(PTTA)

BS 7889Publicat ion Date 15 October 1997, Conf irm Date 01 November 2007

Electric cables. Thermosett ing insulated, unarmoured cables for a voltage of 600/1000 V

BS 8431Publicat ion Date 31 May 2010Electrical stat ic meters for secondary metering and sub-metering. Specif icat ion

BS 8434-2Publicat ion Date 14 August 2003Methods of test for assessment of the f ire integrity of electric cables. Test for unprotectedsmall cables for use in emergency circuits. BS EN 50200 with 930 deg f lame and with waterspray

BS 8436Publicat ion Date 12 August 2004Electric cables. 300/500 V screened electric cables having low emission of smoke and corrosivegases when af fected by f ire, for use in walls, part it ions and building voids. Mult icore cables

BS 8488-128 February 2009Prefabricated wiring systems intended for permanent connect ion in f ixed installat ions.Specif icat ion

BS 8512Publicat ion Date 31 March 2008Electric cables. Code of pract ice for the storage, handling, installat ion and disposal of cables onwooden drums

BS 8519Publicat ion Date 28 February 2010Select ion and installat ion of f ire-resistant power and control cable systems for life safety andf ire-f ight ing applicat ions. Code of pract ice

BS EN 13032-3Publicat ion Date 30 November 2007Measurement and presentat ion of photometric data of lamps and luminaires. Presentat ion ofdata for emergency light ing of work places

BS EN 15265Publicat ion Date 28 September 2007Energy performance of buildings. Calculat ion of energy needs for space heat ing and coolingusing dynamic methods. General criteria and validat ion procedures

BS EN 16001Publicat ion Date 31 July 2009Energy management systems. Requirements with guidance for use

BS EN 1838 (BS 5266-7:1999)Publicat ion Date 15 October 1999Light ing applicat ions. Emergency light ing

BS EN 50110-1Publicat ion Date 31 May 2007Operat ion of electrical installat ions

BS EN 50117-1Publicat ion Date 06 September 2002Coaxial cables. Generic specif icat ion

BS EN 50131-1:2006+A1:2009Publicat ion Date 30 November 2006 (Amendment August 2009. Amends and replaces BS EN50131-1:2006)Alarm systems. Intrusion and hold-up systems. System requirements

BS EN 50160Publicat ion Date 31 August 2010 (Amended March 2011)Voltage characterist ics of electricity supplied by public electricity networks

BS EN 50174-1:2009Publicat ion Date 31 July 2009Informat ion technology. Cabling installat ion. Installat ion specif icat ion and quality assurance

BS EN 50272Publicat ion Date 28 February 2011Safety requirements for secondary batteries and battery installat ions.General safety informat ion

BS EN 50274Publicat ion Date 23 July 2002Low-voltage switchgear and controlgear assemblies. Protect ion against electric shock.Protect ion against unintent ional direct contact with hazardous live parts.

BS EN 50295 (Withdrawn)Withdrawn Date 01 February 2005, Replaced By BS EN 62208:2003Low-voltage switchgear and controlgear. Controller and device interface systems. Actuatorsensor interface (AS-i)

BS EN 50298 (Withdrawn)Withdrawn Date 01 February 2005 Replaced By BS EN 62208:2003Empty enclosures for low-voltage switchgear and controlgear assemblies. Generalrequirements

BS EN 50300 (withdrawn)

Withdrawn Date 30 November 2006Low-voltage switchgear and controlgear assemblies. General requirements for low-voltagesubstat ion cable distribut ion boards

BS EN 50368Publicat ion Date 31 October 2003Cable cleats for electrical installat ions

BS EN 50393 (Supercedes BS 7888 -3)Publicat ion Date 31 August 2006Test methods and requirements for accessories for use on distribut ion cables of rated voltage0,6/1,0 (1,2) kV

BS EN 50464-2-1Publicat ion Date 31 August 2007Three-phase oil-immersed distribut ion t ransformers 50 Hz, f rom 50 kVA to 2500 kVA withhighest voltage for equipment not exceeding 36 kV. Distribut ion t ransformers with cable boxeson the high-voltage and/or low-voltage side. General requirements

BS EN 50464-2-2Publicat ion Date 31 August 2007Three-phase oil-immersed distribut ion t ransformers 50 Hz, f rom 50 kVA to 2 500 kVA withhighest voltage for equipment not exceeding 36 kV. Distribut ion t ransformers with cable boxeson the high-voltage and/or low-voltage side. Cable boxes type 1 for use on distribut iontransformers meet ing the requirements of EN 50464-2-1

BS EN 50464-2-3Publicat ion Date 31 August 2007Three-phase oil-immersed distribut ion t ransformers 50 Hz, f rom 50 kVA to 2500 kVA withhighest voltage for equipment not exceeding 36 kV. Distribut ion t ransformers with cable boxeson the high-voltage and/or low-voltage side. Cable boxes type 2 for use on distribut iontransformers meet ing the requirements of EN 50464-2-1

BS EN 50525-1Publicat ion Date 30 September 2011Electric cables. Low voltage energy cables of rated voltages up to and including 450/750 V(U0/U). General requirements

BS EN 60076-2Publicat ion Date 31 May 2011Power t ransformers. Temperature rise for liquid-immersed transformers

BS EN 60079-14Publicat ion Date 31 January 2009Explosive atmospheres. Electrical installat ions design, select ion and erect ion

BS EN 60079-15Publicat ion Date 30 September 2010Explosive atmospheres. Equipment protect ion by type of protect ion “n”

BS EN 60079-17Publicat ion Date 31 October 2007Explosive atmospheres. Electrical installat ions inspect ion and maintenance

BS EN 60079-18Publicat ion Date 30 September 2010Explosive atmospheres. Equipment protect ion by encapsulat ion “m”

BS EN 60081 + Amendment 4 (2010)Publicat ion Date 15 April 1998Double-capped f luorescent lamps. Performance specif icat ions

BS EN 60204-1Publicat ion Date 30 June 2006Safety of machinery. Electrical equipment of machines. General requirements

BS EN 60238 2004+A1:2009Publicat ion Date 20 January 2005 (Amendment June 2009. Amends and replaces BS EN60238:2004.)Edison screw lampholders

BS EN 60269-1 (BS 88-1:2007)Publicat ion Date 29 June 2007Low-voltage fuses. General requirements

BS EN 60309-2Publicat ion Date 15 October 1999Plugs, socket-out lets and couplers for industrial purposes. Dimensional interchangeabilityrequirements for pin and contact-tube accessories

BS EN 60309-4Publicat ion Date 31 July 2007Plugs, socket-out lets and couplers for industrial purposes. Switched socket-out lets andconnectors, with or without interlock

BS EN 60439-1Publicat ion Date 15 December 1999Low-voltage switchgear and controlgear assemblies. Type-tested and part ially type-testedassemblies

BS EN 60439-2

Publicat ion Date 15 September 2000Specif icat ion for low-voltage switchgear and controlgear assemblies. Part icular requirementsfor busbar t runking systems (busways)

BS EN 60439-3Publicat ion Date 28 June 1991Specif icat ion for low-voltage switchgear and controlgear assemblies. Part icular requirementsfor low-voltage switchgear and controlgear assemblies intended to be installed in places whereunskilled persons have access to their use. Distribut ion boards

BS EN 60439-4Publicat ion Date 11 January 2005Specif icat ion for low-voltage switchgear and controlgear assemblies . Part icular requirementsfor assemblies for construct ion sites (ACS)

BS EN 60439-5Publicat ion Date 30 November 2006Low-voltage switchgear and controlgear assemblies. Part icular requirements for assemblies forpower distribut ion in public networks

BS EN 60529Publicat ion Date 31 January 1992, Conf irm Date 01 October 2004Specif icat ion for degrees of protect ion provided by enclosures (IP code)

BS EN 60546-1Publicat ion Date 28 February 2011Controllers with analogue signals for use in industrial-process control systems.Methods of evaluat ing the performance

BS EN 60598-1 (2008)Publicat ion Date 16 November 2004 (Amendment November 2009)Luminaires. General requirements and tests

BS EN 60598-2-5Publicat ion Date 15 July 1998Luminaires. Part icular requirements. Floodlights

BS EN 60598-2-13Publicat ion Date 29 September 2006Luminaires. Part icular requirements. Ground recessed luminaires

BS EN 60598-2-22Publicat ion Date 15 March 1999Luminaires. Part icular requirements. Luminaires for emergency light ing

BS EN 60664-1

Publicat ion Date 31 August 2007Insulat ion coordinat ion for equipment within low-voltage systems. Principles, requirements andtests

BS EN 60664-5Publicat ion Date 31 December 2007Insulat ion coordinat ion for equipment within low-voltage systems. Comprehensive method fordetermining clearances and creepage distances equal to or less than 2 mm

BS EN 60715Publicat ion Date 15 August 2001Dimensions of low-voltage switchgear and controlgear. Standardized mount ing on rails formechanical support of electrical devices in switchgear and controlgear installat ions

BS EN 60898-1Publicat ion Date 09 September 2003, A1 2004Electrical accessories. Circuit breakers for overcurrent protect ion for household and similarinstallat ions. Circuit -breakers for a.c. operat ion

BS EN 60898-2Publicat ion Date 31 October 2006Electrical accessories. Circuit -breakers for overcurrent protect ion for household and similarinstallat ions. Circuit -breakers for a.c and d.c. operat ion.

BS EN 60947-1Publicat ion Date 31 August 2007Specif icat ion for low-voltage switchgear and controlgear. General rules

BS EN 60947-2Publicat ion Date 29 September 2006Amendment A1: December 2009Low-voltage switchgear and control gear. Circuit -breakers

BS EN 60947-3Publicat ion Date 31 July 2009Low voltage switchgear and controlgear. Switches, disconnectors, switch-disconnectors andfuse-combinat ion units

BS EN 60947-4-1Publicat ion Date 15 August 2001Low-voltage switchgear and controlgear. Contactors and motor-starters. Electromechanicalcontactors and motor-starters

BS EN 60947-4-2Publicat ion Date 15 June 2000

Low-voltage switchgear and controlgear. Contactors and motor-starters. AC semiconductormotor controllers and starters

BS EN 60947-4-3Publicat ion Date 15 August 2000Low-voltage switchgear and controlgear. Contactors and motor-starters. AC semiconductorcontrollers and contactors for non-motor loads

BS EN 60947-5-1Publicat ion Date 28 June 2004Low-voltage switchgear and controlgear. Control circuit devices and switching elements.Electromechanical control circuit devices

BS EN 60947-5-2Publicat ion Date 29 February 2008Low-voltage switchgear and controlgear. Control circuit devices and switching elements.Proximity switches

BS EN 60947-5-3Publicat ion Date 15 September 1999Low-voltage switchgear and controlgear. Control circuit devices and switching elements.Requirements for proximity devices with def ined behaviour under fault condit ions (PDF)

BS EN 60947-5-4Publicat ion Date 18 December 2003Low-voltage switchgear and controlgear. Control circuit devices and switching elements.Method of assessing the performance of low-energy contacts. Special tests

BS EN 60947-5-6Publicat ion Date 18 December 2003Low-voltage switchgear and controlgear. Control circuit devices and switching elements. DCinterface for proximity sensors and switching amplif iers (NAMUR). DC interface for proximitysensors and switching amplif iers (NAMUR)

BS EN 60947-5-7Publicat ion Date 16 October 2003Low-voltage switchgear and controlgear. Control circuit devices and switching elements.Requirements for proximity devices with analogue output

BS EN 60947-5-8Publicat ion Date 31 January 2007Low-voltage switchgear and controlgear. Control circuit devices and switching elements. Three-posit ion enabling switches

BS EN 60947-5-9

Publicat ion Date 31 January 2008Low-voltage switchgear and controlgear. Control circuit devices and switching elements. Flowrate switches

BS EN 60947-6-1Publicat ion Date 01 February 2006Low-voltage switchgear and controlgear. Mult iple funct ion equipment. Transfer switchingequipment

BS EN 60947-6-2Publicat ion Date 26 June 2003Low-voltage switchgear and controlgear. Mult iple funct ion equipment. Control and protect iveswitching devices (or equipment) (CPS)

BS EN 60947-7-1Publicat ion Date 28 November 2002Specif icat ion for low-voltage switchgear and controlgear. Ancillary equipment. Terminal blocksfor copper conductors

BS EN 60947-7-2Publicat ion Date 27 November 2002Specif icat ion for low-voltage switchgear and controlgear. Ancillary equipment. Protect iveconductor terminal blocks for copper conductors

BS EN 60947-7-3Publicat ion Date 27 November 2002Specif icat ion for low-voltage switchgear and controlgear. Ancillary equipment. Safetyrequirements for fuse terminal blocks

BS EN 61000-3-2 + Amendment 2: 2009Publicat ion Date 31 May 2006Electromagnet ic compat ibility (EMC). Limits. Limits for harmonic current emissions (equipmentinput current ≤ 16 A per phase)

BS EN 61000-4-2Publicat ion Date 31 May 2009Electromagnet ic compat ibility (EMC). Test ing and measurement techniques. Electrostat icdischarge immunity test

BS EN 61000-4-3 + Amendment 2: 2010Publicat ion Date 31 July 2006Electromagnet ic compat ibility (EMC) -. Part 4-3: Test ing and measurement techniques –Radiated, radio-frequency, electromagnet ic f ield immunity test

BS EN 61000-4-4 + Amendment 1: 2010

Publicat ion Date 02 February 2005Electromagnet ic compat ibility (EMC). Test ing and measurement techniques. Electrical fastt ransient/burst immunity test

BS EN 61000-4-6Publicat ion Date 31 May 2009Electromagnet ic compat ibility (EMC). Test ing and measurement techniques. Immunity toconducted disturbances, induced by radio-frequency f ields

BS EN 61008 -1Publicat ion Date 28 April 2006Residual current operated circuit -breakers without integral overcurrent protect ion forhousehold and similar used (RCCBs). General rules

BS EN 61008-2-1Publicat ion Date 15 March 1995Specif icat ion for residual current operated circuit -breakers without integral overcurrentprotect ion for household and similar uses (RCCBs). Applicability of the general rules to RCCBsfunct ionally independent of line voltage

BS EN 61009 -1Publicat ion Date 15 March 2005Residual current operated circuit -breakers with integral overcurrent protect ion for householdand similar uses (RCBO’s). General rules

BS EN 61009-2-1Publicat ion Date 15 March 1995Specif icat ion for residual current operated circuit -breakers with integral overcurrent protect ionfor household and similar uses (RCBOs). Applicability of the general rules to RCBOs funct ionallyindependent of line voltage

BS EN 61347-2-11Publicat ion Date 07 March 2002Lamp controlgear. Part icular requirements for miscellaneous electronic circuits used withluminaires

BS EN 61386-1(Replaces BS EN 61386-1:2004 )Publicat ion Date 30 September 2008Conduit systems for cable management. General requirements

BS EN 61439-1Publicat ion Date 31 January 2010Low-voltage switchgear and controlgear assemblies. General rules

BS EN 61439-2Publicat ion Date 31 January 2010Low-voltage switchgear and controlgear assemblies. Power switchgear and controlgearassemblies

BS EN 61439-1Low-voltage switchgear and controlgear assemblies. General rulesPublicat ion Date January 2010

BS EN 61508-1Publicat ion Date 30 June 2010Funct ional safety of electrical/electronic/ programmable electronic safety-related systemsGeneral requirements

BS EN 61508-2Publicat ion Date 30 June 2010Funct ional safety of electrical/electronic/ programmable electronic safety-related systemsRequirements for electrical/ electronic/ programmable electronic safety-related systems

BS EN 61508-3Publicat ion Date 30 June 2010Funct ional safety of electrical/electronic/ programmable electronic safety-related systemsSoftware requirements

BS EN 61508-4Publicat ion Date 30 June 2010Funct ional safety of electrical/electronic/ programmable electronic safety-related systemsDef init ions and abbreviat ions

BS EN 61508-5Publicat ion Date 30 June 2010Examples of methods for the determinat ion of safety integrity levels

BS EN 61508-6Publicat ion Date 30 June 2010Funct ional safety of electrical/electronic/ programmable electronic safety-related systemsGuidelines on the applicat ion of IEC 61508-2 and IEC 61508-3

EN 61508-7Publicat ion Date 30 June 2010Funct ional safety of electrical/electronic/ programmable electronic safety-related systemsOverview of techniques and measures

BS EN 61535:2009(Replaces BS 61535:2006)

Publicat ion Date 30 September 2009Installat ion couplers intended for permanent connect ion in f ixed installat ions

BS EN 61558:2009-1:2005+A1:2009Publicat ion Date 28 April 2006Safety of power t ransformers, power supplies, reactors and similar products. Generalrequirements and tests

BS EN 61915-1Publicat ion Date 31 March 2008Low-voltage switchgear and controlgear. Device prof iles for networked industrial devices.General rules for the development of device prof iles

BS EN 61921Publicat ion Date 27 October 2003Power capacitors. Low-voltage power factor correct ion banks

BS EN 61958Publicat ion Date 08 April 2002High-voltage prefabricated switchgear and controlgear assemblies. Voltage presence indicat ingsystems

BS EN 62026-1Publicat ion Date 31 October 2007Low-voltage switchgear and controlgear. Controller-device interfaces (CDIs). General rules

BS EN 62040-1-2Publicat ion Date 24 February 2003Uninterrupt ible power systems (UPS). General and safety requirements for UPS used inrestricted access locat ions

BS EN 62208Publicat ion Date 16 February 2004Empty enclosures for low-voltage switchgear and controlgear assemblies. Generalrequirements

BS EN 62271-1Publicat ion Date 31 March 2009High-voltage switchgear and controlgear. Common specif icat ions

BS EN 62271-100Publicat ion Date 31 July 2009High-voltage switchgear and controlgear. Alternat ing current circuit -breakers

BS EN 62271-105Publicat ion Date 02 September 2004

High-voltage switchgear and controlgear. Alternat ing current switch-fuse combinat ions

BS EN 62271-107Publicat ion Date 31 March 2006High-voltage switchgear and controlgear. Alternat ing current fused circuit -switchers for ratedvoltages above 1 kV up to and including 52 kVHigh-voltage switchgear and controlgear

BS EN 62271-108Publicat ion Date 31 May 2006High-voltage switchgear and controlgear. High-voltage alternat ing current disconnect ing circuit -breakers for rated voltages of 72,5 kV and above

BS EN 62271-109Publicat ion Date 28 February 2007High-voltage switchgear and controlgear. Alternat ing-current series capacitor by-pass switches

BS EN 62271-110Publicat ion Date 31 March 2006High-voltage switchgear and controlgear. Induct ive load switching

BS EN 62271-200Publicat ion Date 31 October 2005High-voltage switchgear and controlgear. AC metal-enclosed switchgear and controlgear forrated voltages above 1 kV and up to and including 52 kV

BS EN 62271-201Publicat ion Date 31 January 2007High-voltage switchgear and controlgear. A.C. insulat ion-enclosed switchgear and controlgearfor rated voltages above 1 kV and up to and including 52 kV

BS EN 62271-202Publicat ion Date 30 March 2007High-voltage switchgear and controlgear. High voltage/low voltage prefabricated substat ion

BS EN 62271-207Publicat ion Date 31 March 2008High-voltage switchgear and controlgear. Seismic qualif icat ion for gas-insulated switchgearassemblies for rated voltages above 52 kV

BS EN 62271-209Publicat ion Date 29 February 2008High-voltage switchgear and controlgear. Cable connect ions for gas-insulated metal-enclosedswitchgear for rated voltages above 52 kV. Fluid-f illed and extruded insulat ion cables. Fluid-f illed and dry-type cable-terminat ions

BS EN 62271-3

Publicat ion Date 29 December 2006High-voltage switchgear and controlgear. Digital interfaces based on IEC 61850

BS EN 62305-1Publicat ion Date 30 June 2011Protect ion against lightning. General principles

BS EN 62305-2Publicat ion Date 29 September 2006Protect ion against lightning. Risk management

BS EN 62305-3Publicat ion Date 30 June 2011Protect ion against lightning. Physical damage to structures and life hazard

BS EN 62305-4Publicat ion Date 30 June 2011Protect ion against lightning. Electrical and electronic systems within structures

BS EN 62341-1-1Publicat ion date 31 July 2009Organic light emit t ing diode (OLED) displays. Generic specif icat ions

BS EN 62384Publicat ion Date 30 November 2006Amendment: A1 December 2009DC or AC supplied electronic control gear for LED modules. Performance requirements

BS EN ISO 11161 (Amendment April 2010)Publicat ion Date 29 June 2007Safety of machinery. Integrated manufacturing systems. Basic requirements

BS EN ISO 13943Publicat ion Date 31 December 2010Fire safety. Vocabulary

BS EN ISO 16484-5Publicat ion Date 31 March 2008Building automat ion and control systems. Data communicat ion protocol

BS ISO 26382:2010Publicat ion Date February 2010Cogenerat ion systems. Technical declarat ions for planning, evaluat ion and procurement

BS ISO 50001:2011Publicat ion Date 15 June 2011

Energy management systems. Requirements with guidance for use

PD CLC/TR 50479Publicat ion Date 29 June 2007Electrical installat ion guide. Select ion and erect ion of electrical equipment. Wiring systems.Limitat ion of temperature rise of connect ing interfaces

The informat ion above was provided by the BSI. For more informat ion, please use the followinglink.