electrical-engineering-portal.com-electrical safety standards for lvmvhv part2
TRANSCRIPT
-
7/30/2019 Electrical-Engineering-portal.com-Electrical Safety Standards for LVMVHV Part2
1/13
electrical-engineering-portal.com
http://electrical-engineering-portal.com/electrical-safety-standards-for-lvmvhv-part-2
Electrical Saf ety Standards f or LV/MV/HV part 2 (on photo Downtown LA dist ribution power
lines; pho to by Hal Bergman Photography @Flickr)
Electrical Safety Standards for LV/MV/HV(Part-2)
Continued from part 1 Electrical Safety Standards for LV/MV/HV (Part-1)
Content
Standard: Northern Ireland Electricity (NIE), 6/025 ENA
1. Clearances of Electrical Line to Ground and Roads
2. Clearances of Electrical Line to Other Objects
http://electrical-engineering-portal.com/electrical-safety-standards-for-lvmvhv-part-2#2http://electrical-engineering-portal.com/electrical-safety-standards-for-lvmvhv-part-2http://electrical-engineering-portal.com/electrical-safety-standards-for-lvmvhv-part-2#2http://electrical-engineering-portal.com/electrical-safety-standards-for-lvmvhv-part-2#1http://electrical-engineering-portal.com/electrical-safety-standards-for-lvmvhv-part-1http://electrical-engineering-portal.com/electrical-safety-standards-for-lvmvhv-part-2 -
7/30/2019 Electrical-Engineering-portal.com-Electrical Safety Standards for LVMVHV Part2
2/13
3. Clearances of Electrical Line to T rees and Hedges
4. Clearances of Electrical Line to Street Lighting
5. Clearances of Electrical Line to Waterways
6. Clearances to Railways
7. Clearances of Electrical Line to Fuel Tanks8. Clearances of Electrical Lines to other Electrical Lines
9. Vert ical Passing Clearance (sites where vehicles will pass below the lines)
10. Horizontal Clearance (sites where there will be no work or passage of plant under lines)
11. Distance between Conductors of Same/Different Circuit (On Same Support)
12. Vertical Distance between Conductors of different Circuit (On Different Support)
13. Distance between Conductors (Taken down f rom Pole to ot her Support, on Transformer)
14. Horizontal Distance of Telecommunication Line & Overhead Line
15. Passage Way for Metal-Clad Switchgear
16. Safe approach distance for Person from Exposed Live Parts
Standard: Northern Ireland Electricity (NIE), 6/025 ENA
Clearances ofElectrical Line to Ground and Roads
DescriptionofClearance
0.4 KV 11 KV 33KV 110KV 220 KV 400KV
Lineconductorto any pointnot overroad
5.2Meter
6.1Meter
6.4Meter
6.4Meter
7.0Meter
7.0Meter
Lineconductorto roadsurface
5.8Meter
6.1Meter
6.4Meter
6.4Meter
7.4Meter
8.1Meter
Lineconductorto roadsurface ofhigh loadroutes
6.9Meter
6.9Meter
6.9Meter
7.2Meter
8.5Meter
9.2Meter
http://electrical-engineering-portal.com/effect-of-lightning-strike-on-electrical-lineshttp://electrical-engineering-portal.com/electrical-safety-standards-for-lvmvhv-part-2#16http://electrical-engineering-portal.com/electrical-safety-standards-for-lvmvhv-part-2#15http://electrical-engineering-portal.com/electrical-safety-standards-for-lvmvhv-part-2#14http://electrical-engineering-portal.com/electrical-safety-standards-for-lvmvhv-part-2#13http://electrical-engineering-portal.com/electrical-safety-standards-for-lvmvhv-part-2#12http://electrical-engineering-portal.com/electrical-safety-standards-for-lvmvhv-part-2#11http://electrical-engineering-portal.com/electrical-safety-standards-for-lvmvhv-part-2#10http://electrical-engineering-portal.com/electrical-safety-standards-for-lvmvhv-part-2#9http://electrical-engineering-portal.com/electrical-safety-standards-for-lvmvhv-part-2#8http://electrical-engineering-portal.com/electrical-safety-standards-for-lvmvhv-part-2#7http://electrical-engineering-portal.com/electrical-safety-standards-for-lvmvhv-part-2#6http://electrical-engineering-portal.com/electrical-safety-standards-for-lvmvhv-part-2#5http://electrical-engineering-portal.com/electrical-safety-standards-for-lvmvhv-part-2#4http://electrical-engineering-portal.com/electrical-safety-standards-for-lvmvhv-part-2#3 -
7/30/2019 Electrical-Engineering-portal.com-Electrical Safety Standards for LVMVHV Part2
3/13
Bare livemetalwork (transformerterminals,
jumperconnections,etc)
4.6Meter
4.6Meter
4.6Meter
- - -
Go t o Content
Clearances of Electrical Line to Other Objects
Description ofClearance
-
7/30/2019 Electrical-Engineering-portal.com-Electrical Safety Standards for LVMVHV Part2
4/13
Line conductorsto CaravanSites
9.0 Meter 9.0 Meter 9.0 Meter 9.0 Meter 9.0 Meter
Horizontalclearances towells
15.0Meter
15.0Meter
15.0Meter
15.0Meter
15.0 Meter
Go t o Content
Clearances of Electrical Line to Trees and Hedges
Description ofClearance
-
7/30/2019 Electrical-Engineering-portal.com-Electrical Safety Standards for LVMVHV Part2
5/13
-
7/30/2019 Electrical-Engineering-portal.com-Electrical Safety Standards for LVMVHV Part2
6/13
hangingverticallyonly
(3) Columnfallingtowards line
- 0.4Meter
0.4Meter
0.8Meter
1.4Meter
1.9Meter
Go t o Content
Clearances of Electrical Line to Waterways
Descriptionof Clearance
0.4 KV 11 KV 33KV 110KV 220 KV 400KV
NavigableWaters:Lower bank toconductor orearth wire
10.5Meter
10.5Meter
10.5Meter
10.5Meter
10.5Meter
10.5Meter
MinorWatercourses
: Lower bankto conductoror earth wire
7.6Meter
7.6Meter
7.6Meter
7.6Meter
7.6Meter
7.6Meter
Go t o Content
Clearances to Railways
DescriptionofClearance
0.4 KV 11 KV 33KV 110KV 220 KV 400KV
Lineconductorto groundlevel
6.1Meter
6.1Meter
6.1Meter
6.7Meter
7.0Meter
7.6Meter
Lineconductorto groundlevel on or
7.6Meter
8.5Meter
8.5Meter
9.1Meter
9.4Meter
10.1Meter
http://electrical-engineering-portal.com/electrical-safety-standards-for-lvmvhv-part-2#contenthttp://electrical-engineering-portal.com/qatar-general-electricity-water-corporation-safety-clearancehttp://electrical-engineering-portal.com/electrical-safety-standards-for-lvmvhv-part-2#content -
7/30/2019 Electrical-Engineering-portal.com-Electrical Safety Standards for LVMVHV Part2
7/13
acrossvehicleparks
Lineconductorto ground
level atroads andyards,where roadmobilecranes arelikely to beemployed
10.7Meter
10.7Meter
10.7Meter
11.2Meter
11.5Meter
12.2Meter
Line
conductorto Rail level
7.3
Meter
7.3
Meter
7.3
Meter
8.0
Meter
8.2
Meter
8.8
Meter
Lineconductorto the levelof buildings,gantries orotherstructures
(includingthosecarryingtractionwires) onwhich a manmay be
3.0Meter
3.0Meter
3.0Meter
3.7Meter
4.6Meter
6.1Meter
Lineconductor
to polesand ot herprojections.
2.4Meter
2.7Meter
2.7Meter
3.0Meter
3.7Meter
5.5Meter
Lineconductorto any otherwire otherthantraction
wires.
1.8Meter
1.8Meter
1.8Meter
2.4Meter
3.0Meter
3.7Meter
Go t o Content
http://electrical-engineering-portal.com/electrical-safety-standards-for-lvmvhv-part-2#content -
7/30/2019 Electrical-Engineering-portal.com-Electrical Safety Standards for LVMVHV Part2
8/13
Clearances of Electrical Line to Fuel Tanks>
DescriptionofClearance
0.4 KV 11 KV 33KV 110KV 220 KV 400KV
Horizontalclearancefrom lineconductorsto petroltanks andvents
15Meter
15Meter
15Meter
15Meter
15Meter
15 Meter
Horizontalclearancefrom lineconductorsto liquid gastanks
(1) 459 to2273 litrecapacity
3.0Meter
3.0Meter
3.0Meter
3.4Meter
4.6Meter
5.3Meter
(2) 2274 to9092 litrecapacity
7.6Meter
7.6Meter
7.6Meter
7.6Meter
7.6Meter
7.6Meter
(3) Morethan 9093litre.
15Meter
15Meter
15Meter
15Meter
15Meter
15 Meter
Verticalclearancefrom lineconductorsto fuel oiltanks
Please refer Clearances to Objects
Go t o Content
Clearances of Electrical Lines to other Electrical Lines
http://electrical-engineering-portal.com/electrical-safety-standards-for-lvmvhv-part-2#content -
7/30/2019 Electrical-Engineering-portal.com-Electrical Safety Standards for LVMVHV Part2
9/13
DescriptionofClearance
0.4 KV 11 KV 33KV 110KV 220 KV 400KV
Lowest lineconductoror earth
wire ofupper line tohighest lineconductorof lowerline.
1.0Meter
1.8Meter
2.0Meter
2.5Meter
3.7Meter
4.4Meter
Lowest lineconductoror earth
wire ofupper line toearth wireof lower linewhereerected.
0.7Meter
1.4Meter
1.6Meter
2.5Meter
3.7Meter
4.4Meter
Lowest lineconductoror earth
wire ofupper line toany pointon asupport ofthe lowerline onwhich aperson maystand.
2.7Meter
2.8Meter
3.0Meter
3.4Meter
4.6Meter
5.3Meter
Support ofupper lineand anyconductorof lowerline.
7.5Meter
7.5Meter
7.5Meter
15Meter
15Meter
15Meter
Go t o Content
Vertical Passing Clearance (sites where vehicles will pass belowthe lines)
http://electrical-engineering-portal.com/electrical-safety-standards-for-lvmvhv-part-2#content -
7/30/2019 Electrical-Engineering-portal.com-Electrical Safety Standards for LVMVHV Part2
10/13
Descript ion of Clearance 1 KV 2.0 Meter
Above 110 KV All 2.5 Meter
Go t o Content
http://electrical-engineering-portal.com/electrical-safety-standards-for-lvmvhv-part-2#contenthttp://electrical-engineering-portal.com/electrical-safety-standards-for-lvmvhv-part-2#contenthttp://electrical-engineering-portal.com/electrical-safety-standards-for-lvmvhv-part-2#content -
7/30/2019 Electrical-Engineering-portal.com-Electrical Safety Standards for LVMVHV Part2
11/13
Vertical Distance between Conductors of different Circuit (OnDifferent Support)
Higher Voltage of either Circuit Distance betweenCircuits
< 1 KV 0.6 Meter
1 KV to 33 KV 1.2 Meter
33 KV to 66 KV 1.8 Meter
110 KV 2.4 Meter
220 KV 2.8 Meter
Go t o Content
Distance between Conductors (Taken down from Pole to otherSupport, on Transformer)
Voltage Distancebetween Circuits
11 KV & LV Line 0.60 Meter
22 KV & LV Line 0.75 Meter
33 KV & LV Line 0.90 Meter
Go t o Content
Horizontal Distance of Telecommunication Line & Overhead Line
Descript ion of Clearance Distance
Telecommunication Line(Not insulated) to HV Line Min 1.6 Meter
http://electrical-engineering-portal.com/electrical-safety-standards-for-lvmvhv-part-2#contenthttp://electrical-engineering-portal.com/electrical-safety-standards-for-lvmvhv-part-2#content -
7/30/2019 Electrical-Engineering-portal.com-Electrical Safety Standards for LVMVHV Part2
12/13
Telecommunication Line (Bare) to LV (Bare) Line Min 1.2 Meter
Telecommunicat ion Line (Covered) to LV (Bare) Line Min 0.6 Meter
Telecommunication Line (Bare) to Stay (Bare) Wire Min 0.3 Meter
Go t o Content
Passage Way for Metal-Clad Switchgear
Descript ion of Clearance Distance
Clean &unobstructed Passages at the front of any Low/High VoltageSwitchgear.
1.0 Meter wide& 2.5 Meterhigh
Clean &unobstructed Passages at side or under any earthedenclosure cont aining Bare Conductor
0.8 Meter wide& 2.2 Meterhigh
Go t o Content
Safe approach distance for Person from Exposed Live Parts
Circuit Voltage Distance
< 1 KV 0.5 Meter
11 KV 1.5 Meter
22 KV 2.0 Meter
33 KV 2.5 Meter
66 KV 3.0 Meter
110 KV 4.0 Meter
>220 KV 6.0 Meter
http://electrical-engineering-portal.com/electrical-safety-standards-for-lvmvhv-part-2#contenthttp://electrical-engineering-portal.com/electrical-safety-standards-for-lvmvhv-part-2#content -
7/30/2019 Electrical-Engineering-portal.com-Electrical Safety Standards for LVMVHV Part2
13/13
Go t o Content
Recommended by others
http://electrical-engineering-portal.com/electrical-safety-standards-for-lvmvhv-part-2#content