egg drop ix-diamond mhs (group 2-einstein)
TRANSCRIPT
EGG DROP
Objectives
To prove that the egg which is drop in a five-storey building will not break.
To prevent the egg from breaking through the use of indirect contact.
Materials Needed
EGG
•••••••••••••••
RUBBER BANDS
•••••••••••••••
TAPE
•••••••••••••••
PAPERS
•••••••••••••••
SPONGES
•••••••••••••••
STUFFED TOY
•••••••••••••••
AREA OF DROPPING
5 Storey Building
Procedures
Procedures: 1) Place the egg between two sponges using a rubber bond. 2) Roll the product into pieces of paper until it is secured. 3) Place it inside the stuffed toy for it to be protected. 4) Close the opening of the toy and use a tape to seal it. 5) Now you could easily drop it without breaking the egg.
Performance
Why didn’t the egg break?What kind of object should be used to prevent
the impact?
••••••••••••••••••••••••••••••••••
Questions to be asked
Explanation
Properties
• It is because of the properties of the object used and it’s ability to absorb the force the egg will take from dropping.
1st
Physics
• When other forces are combined with gravity, such as motion , inertia, or power, it may be impossible to prevent an impact which will cause damage.
Use light and
strong materials.
This device
must be protective
.
Reduce the force of impact.
Can absorb the energy
the egg gathers as it accelerates towards the
ground.
2nd
CONCEPTS
Properties of an object
used is responsible
for it’s reaction.
Indirect process
should be used for the
egg drop experiment.
Shock absorber
lessen the impact.
Momentum is a measurement of a tendency of an object to move a
t a constant speed along a straight line.
Gravity provides the necessary
downward force which create
friction between the object and
the ground.
The properties of an object
should be airy and soft
Jester CADEVIDAKatherine ELBO
Nicole BORCELISThomas JIMENEZ
Allan VILLARANAyana DEL VALLE
Josh PILAR Sofia MENDOZA
EGG DROP
Group Einstein