ecss - esa.vpsearch.nlesa.vpsearch.nl/.../6293/ecss-doc-001_issue7.115october2014.pdf · finally,...

ECSS-DOC-001/ES Issue 7.1 15 October 2014

ECSS ECSS Document Tree and Status (ST, HB, TM) - Overview

ECSS Secretariat ESA-ESTEC

Requirements & Standards Division Noordwijk, The Netherlands


Change log

ECSS-DOC-001/ES Issue 7

13 October 2014

Update to account for the new published ECSS documents:

- ECSS-Q-ST-20-07C

- ECSS-Q-ST-20-08C, and

- ECSS-E-AS-11C

ECSS-DOC-001/ES Issue 7.1

15 October 2014

Update to account for the new published ECSS documents:

- ECSS-Q-ST-70C Rev.1

- ECSS-Q-ST-70-71C, and

- ECSS-E-ST-32-08C Rev.1

Table of contents

Change log ................................................................................................................. 2

1 Introduction ........................................................................................................... 3

2 ECSS Disciplines ................................................................................................... 4

3 Standards ............................................................................................................... 5

3.1 Management branch: Standards ............................................................................... 5

3.2 Product assurance branch: Standards ...................................................................... 6

3.3 Engineering branch: Standards................................................................................. 8

3.4 Sustainability branch ............................................................................................... 10

4 Handbooks and Technical Memoranda ............................................................. 11

4.1 Product assurance branch: Handbooks and TMs ................................................... 11

4.2 Engineering branch: Handbooks and TMs .............................................................. 12

5 ECSS Policy and Configuration and information mangement documents .... 13

2


1 Introduction This document is targeting ECSS users and developers to be used as a dashboard to summarize the status of published documents, documents in the ongoing Work-plan (new and to be updated), and identifies potential documents to be updated (e.g. because CRs where provided and not yet closed).

The ECSS standards are organized in three branches: Management, Engineering and Product Assurance, and each branch is organized in disciplines (see section 2).

The identification of the different standards published, under production (i.e. to be updated or to be issued for the first time), or later to be modified is provided in section 3.1 for the Management standards, in section 3.2 for the Product Assurance standards, and in section 3.3 for the Engineering standards. On the figures the situation for each standard is identified as follows:

Standard published where no update is ongoing (valid issue of standard identified)

Published standard that will be modified due to near term

publication of other standard

Standard published where an update is ongoing (will be

republished as per Work-plan)

Note: Updates are done based on dispositioned document Change Requests

New standard under drafting (will be published as per Work-plan)

The identification of the different Handbook and TMs published or under production is provided in section 4.1 for the Product Assurance standards, and in section 4.2 for the Engineering standards.

Finally, section 5 lists the active version of the ECSS standards, section 3.2 lists the standards under update or drafting, and section 3.3 lists all previous version superseded.

LEGEND:

• ST – Standard

• AS – Adopted Standard

• HB – Handbook

• AH – Adopted Handbook

• TM – Technical Memorandum

3


2 ECSS Disciplines ECSS-S-ST-00C

System descriptionECSS-S-ST-00-01C

Glossary of terms

Space project management branch

Space product assurance branch

Space engineering branch

M-10 disciplineProject planning and implementation

M-40 disciplineConfiguration and information management

M-60 disciplineCost and schedule management

M-70 disciplineIntegrated logistic support

M-80 disciplineRisk management

Q-10 disciplineProduct assurance management

Q-20 disciplineQuality assurance

Q-30 disciplineDependability

Q-40 disciplineSafety

Q-60 disciplineEEE components

Q-70 disciplineMaterials, mechanical parts and processes

E-10 disciplineSystem engineering

E-20 disciplineElectrical and optical engineering

E-30 disciplineMechanical engineering

E-40 disciplineSoftware engineering

E-50 disciplineCommunications

E-60 disciplineControl engineering

E-70 disciplineGround systems and operations

Q-80 disciplineSoftware product assurance

LEGENDLEGEND

Ongoing update of an existing document

U

Space sustainability branch

U-10 disciplineSpace debris

U-20 disciplinePlanetary protection

(as of 6 May 2014)

U-30 disciplineSpace situation awareness

4


3 Standards 3.1 Management branch: Standards

M-10 disciplineProject planning and implementation

M-40 disciplineConfiguration and information management

M-60 disciplineCost and schedule management

M-70 disciplineIntegrated logistic support

M-80 disciplineRisk management

Space project management branch

ECSS-M-ST-10C Rev.1Project planning and implementation

ECSS-M-ST-40C Rev.1Configuration and information management

ECSS-M-ST-60CCost and schedule management

ECSS-M-70AIntegrated logistic support

ECSS-M-ST-80CRisk management

ECSS-M-ST-10-01COrganization and conduct of reviews

Published

LEGENDLEGEND


New document in production NU

(as of 25 March 2010)

Document affected by update of other doc.

M

5


3.2 Product assurance branch: Standards









ECSS-Q-ST-10C Product assurance management

ECSS-Q-ST-60-13CCommercial electrical, electronic and electromechanical (EEE) components

ECSS-Q-ST-10-04CCritial-item control

ECSS-Q-ST-30-09CAvailability analysis

ECSS-Q-ST-40-12CFault tree analysis - Adoption notice ECSS/IEC 61025

ECSS-Q-ST-60-02CASIC and FPGA development

ECSS-Q-ST-60-05C Rev.1Generic procurement requirements for hybrids

ECSS-Q-ST-60-12CDesign, selection, procurement and use of die form monolithic microwave integrated circuits

ECSS-Q-ST-60C Rev.2Electrical, electronic and electromechanical (EEE) components

ECSS-Q-ST-10-09CNonconformance control system

ECSS-Q-ST-20C Rev.1Quality assurance

ECSS-Q-ST-30-02CFailure modes, effects (and criticality) analysis

ECSS-Q-ST-30CDependability

ECSS-Q-ST-40-02CHazard analysis

ECSS-Q-ST-40CSafety

ECSS-Q-ST-80CSoftware product assurance

ECSS-Q-ST-60-14CRelifing procedure – EEE components

NOTE: Q-70 discipline is detailed in the next chart

NOTE: Q-70 discipline is detailed in the next chart

ECSS-Q-ST-20-10COff-the-shelf items utilization in space systems

ECSS-Q-ST-20-07CQuality and safety assurance for space test centres

ECSS-Q-ST-60-15CRadiation hardness assurance – EEE components

(as of 13 October 2014)

Published

LEGENDLEGEND




M

ECSS-Q-ST-20-08CStorage, handling and transportation of spacecraft hardware

ECSS-Q-ST-30-11C Rev.1Derating - EEE components

ECSS-Q-ST-10C Rev.1 U

ECSS-Q-ST-20C Rev.2

ECSS-Q-ST-30C Rev.1

ECSS-Q-ST-40C Rev.1U U ECSS-Q-ST-80C

Rev.1U U

6


ECSS-Q-ST-70-03CBlack-anodizing of metals with inorganic dyes

ECSS-Q-ST-70-06CParticle and UV radiation testing for space materials


ECSS-Q-ST-70-09CMeasurements of thermo-optical properties of thermal control materials

ECSS-Q-ST-70-20CDetermination of the susceptibility of silver-plated copper wire and cable to "red-plague" corrosion

ECSS-Q-ST-70-22CControl of limited shelf-life materials

ECSS-Q-ST-70C Rev.1 Materials, mechanical parts and processes

ECSS-Q-ST-70-26CCrimping of high-reliability electrical connections

ECSS-Q-ST-70-28CRepair and modification of printed circuit board assemblies for space use

ECSS-Q-ST-70-30CWire wrapping of high-reliability electrical connections

ECSS-Q-ST-70-38CHigh-reliability soldering for surface-mount and mixed technology

ECSS-Q-ST-70-45CMechanical testing of metallic materials

ECSS-Q-ST-70-46C Rev.1Requirements for manufacturing and procurement of threaded fasteners

ECSS-Q-ST-70-01CCleanliness and contamination control

ECSS-Q-ST-70-02CThermal vacuum outgassing test for the screening of space materials

ECSS-Q-ST-70-04CThermal testing for the evaluation of space materials, processes, mechanical parts and assemblies

ECSS-Q-ST-70-05CDetection of organic contamination surfaces by IR spectroscopy

ECSS-Q-ST-70-08CManual soldering of high-reliability electrical connections

ECSS-Q-ST-70-10CQualification of printed circuit boards

ECSS-Q-ST-70-11CProcurement of printed circuit boards

ECSS-Q-ST-70-13C Rev.1Measurements of the peel and pull-off strength of coatings and finishes using pressure-sensitive tapes

ECSS-Q-ST-70-18CPreparation, assembly and mounting of RF coaxial cables

ECSS-Q-ST-70-21CFlammability testing for the screening of space materials

ECSS-Q-ST-70-29CDetermination of offgassing products from materials and assembled articles to be used in a manned space vehicle crew compartment

ECSS-Q-ST-70-31CApplication of paints and coatings on space hardware

ECSS-Q-ST-70-36CMaterial selection for controlling stress-corrosion cracking

ECSS-Q-ST-70-37CDetermination of the susceptibility of metals to stress-corrosion cracking

ECSS-Q-ST-70-07CVerification and approval of automatic machine wave soldering

ECSS-Q-ST-70-71CMaterials, processea and their data selection

ECSS-Q-ST-70-50CParticle contamination monitoring for spacecraft systems and cleanrooms

ECSS-Q-ST-70-12CDesign rules for printed circuit boards

Cleanliness Material testing Material processes Assembling processes Parts


Published

LEGENDLEGEND




M

Planetary protection

ECSS-Q-ST-70-53CMaterials and hardware compatibility tests for sterilization processes

ECSS-Q-ST-70-55CMicrobiological examination of flight hardware and cleanrooms

ECSS-Q-ST-70-58CBioburden control in cleanrooms

ECSS-Q-ST-70-56CVapour phase bioburden reduction for flight hardware

ECSS-Q-ST-70-57CDry heat bioburden reduction for flight hardware

ECSS-Q-ST-70-54CUltra cleaning of flight hardware N

ECSS-Q-ST-70-38C Rev.1 UECSS-Q-ST-70-39CProcessing and quality assurance requirements for welding of metallic materials for flight hardware N

ECSS-Q-ST-70-10C Rev.1

ECSS-Q-ST-70-11C Rev.1

U

U

ECSS-Q-ST-70-26C Rev.1 U

ECSS-Q-ST-70-15CNon-destructive testing or non-destructive inspectionN

ECSS-Q-ST-70-14CCorrosion

N

7


3.3 Engineering branch: Standards Space engineering

branch








ECSS-E-ST-10-09CReference coordinate system

ECSS-E-ST-10-11CHuman factors engineering

ECSS-E-ST-20-06CSpacecraft charging

ECSS-E-ST-20-07C Rev.1Electromagnetic compatibility

ECSS-E-ST-20-08C Rev.1Photovoltaic assemblies and components

ECSS-E-ST-20CElectrical and electronic

ECSS-E-ST-50-01CSpace data links - Telemetry synchronization and channel coding

ECSS-E-ST-50-02CRanging and Doppler tracking

ECSS-E-ST-50-03CSpace data links - Telemetry transfer frame protocol

ECSS-E-ST-50-04CSpace data links - Telecommand protocols, synchronization and channel coding

ECSS-E-ST-50-05C Rev.2Radio frequency and modulation

ECSS-E-ST-50-12C (see NOTE 1)SpaceWire - Links, nodes, routers and networks

ECSS-E-ST-50-14CSpacecraft discrete interfaces

ECSS-E-ST-50CCommunications

ECSS-E-ST-60-20C Rev.1Star sensor terminology and performance specification

ECSS-E-ST-70-11CSpace segment operability

ECSS-E-ST-70-31CGround systems and operations - Monitoring and control data definition

ECSS-E-ST-70-32CTest and operations procedure language

ECSS-E-ST-70CGround systems and operations

ECSS-E-ST-10-02CVerification

ECSS-E-ST-10-03CTesting

ECSS-E-ST-10-04CSpace environment

ECSS-E-ST-10-06CTechnical requirements specification

ECSS-E-ST-10-12CMethod for the calculation of radiation received and its effects, and a policy for design margins

ECSS-E-ST-10CSystem engineering general requirements

ECSS-E-ST-40CSoftware general requirements

ECSS-E-ST-50-13CInterface and communication protocol for Mil std 1553B

ECSS-E-ST-60-10CControl performances

ECSS-E-ST-10-24CInterface management

ECSS-E-ST-60-21CGyros terminology and performance

Note: E-30 discipline is detailed in the next chart

Note: E-30 discipline is detailed in the next chart

ECSS-E-ST-70-01COn-board control procedures

E-20-01A Rev.1Multipaction design and test

ECSS-E-ST-50-15CCAN bus extension protocol

N

N

ECSS-E-70-41ATelemetry and telecommand packet utilization

ECSS-E-ST-70-41C U

NOTE 1: At next issue, the document might be renumbered to: ECSS-ECSS-E-ST-50-50

ECSS-E-ST-50-52CSpaceWire - Remote memory access protocol

ECSS-E-ST-50-53CSpaceWire - CCSDS packet transfer protocol

N

ECSS-E-ST-50-51CSpaceWire protocol identification


Published

LEGENDLEGEND




M

MECSS-E-ST-50-12C Rev.1 U

M

ECSS-E-ST-20-20CInterface requirements for electrical power N

ECSS-E-ST-60-30CAttitude and orbit control systems (AOCS) requirements

ECSS-E-ST-10C Rev.1

ECSS-E-ST-10-02C Rev.1

U

U

ECSS-E-ST-20C Rev.1 UECSS-E-AS-11CAdoption Notice of ISO 16290 – Definition of TRLs and their criteria of assessment

8



ECSS-E-ST-32-02C Rev.1Structural design and verification of pressurized hardware

ECSS-E-ST-32-03CStructural finite element models

ECSS-E-ST-32-08C Rev.1Materials

ECSS-E-ST-32-10C Rev.1Structural factors of safety for spaceflight hardware

ECSS-E-ST-32-11CModal survey assessment

ECSS-E-ST-32C Rev.1Structural general requirements

ECSS-E-ST-33-11CExplosive systems and devices

ECSS-E-ST-34CEnvironmental control and life support

ECSS-E-ST-35-06C Rev.1Cleanliness requirements for spacecraft propulsion hardware

ECSS-E-ST-31CThermal control general requirements

ECSS-E-ST-32-01C Rev.1Fracture control

ECSS-E-ST-33-01CMechanisms

ECSS-E-ST-35-01CLiquid and electric propulsion for spacecraft

ECSS-E-ST-35-10CCompatibility testing for liquid propulsion systems

ECSS-E-ST-35C Rev.1Propulsion general requirements

ECSS-E-ST-31-02CTwo-phase heat transport equipment

ECSS-E-ST-35-02CSolid propulsion for spacecraft and launchers

ECSS-E-ST-35-03CLiquid propulsion for launchers


Published

LEGENDLEGEND




M



U

U

ECSS-E-ST-31-02C Rev.1U

ECSS-E-ST-31-04CExchange of thermal model data for space applications N

9


3.4 Sustainability branch

Space sustainability branch

U-10 disciplineSpace debris

Published Document affected by update of other doc.

M


UNew document in production N

ECSS-U-AS-10CAdoption Notice of ISO 24113: Space systems - Space debris mitigation requirements


U-20 disciplinePlanetary protection

ECSS-U-ST-20CPlanetary protection

N

U-30 disciplineSpace situation awareness

10


4 Handbooks and Technical Memoranda 4.1 Product assurance branch: Handbooks and TMs









LEGENDLEGEND

ECSS-Q-HB-80-01AReuse of existing software

ECSS-Q-HB-80-02 Part 1ASoftware process assessment and improvement – Part 1: Framework

ECSS-Q-HB-80-03AMethods and techniques to support the assessment of software dependability and safety

ECSS-Q-HB-80-04ASoftware metrication programme definition and implementation

ECSS-Q-TM-30-12AEnd-of-life parameters drifts – EEE components

ECSS-Q-TM-70-52AKinetic outgassing of materials for space

TM made availableHB Published(as of 4 February 2014)

ECSS-Q-TM-70-51ATermination of optical fibres

ECSS-Q-TM-40-04 Part 1ASneak analysis – Part 1: Principles and requirements

ECSS-Q-TM-40-04 Part 2ASneak analysis – Part 2: Clue list ECSS-Q-HB-80-02 Part 2A

Software process assessment and improvement – Part 2: Assessor instrument

ECSS-Q-HB-30-01AWorst case analysis

ECSS-Q-HB-30-08AComponent reliability data sources and their use

ECSS-Q-HB-30-03AHuman error analysis handbook

ECSS-Q-HB-60-02ATechnique for radiation effects mitigation in ASICs and FPGAs handbook



NN

11


4.2 Engineering branch: Handbooks and TMs Space engineering

branch








ECSS-E-TM-10-21ASystem modelling and simulation

ECSS-E-HB-50ACommunications guidelines

ECSS-E-HB-10-02AVerification guidelines

ECSS-E-HB-40ASoftware engineering handbook

ECSS-E-HB-20-07ASpacecraft electromagnetic compatibility handbook

ECSS-E-TM-10-20AProduct data exchange

ECSS-E-TM-10-23ASpace system data repository

ECSS-E-HB-10-12ACalculation of radiation and its effects, and margin policy handbook

ECSS-E-HB-20-05AHigh voltage engineering and design handbook

ECSS-E-HB-32-20AStructural design data handbook (8 parts)

ECSS-E-HB-31-01AThermal design data handbook (16 parts)

ECSS-E-HB-32-24ABuckling handbook

ECSS-E-HB-32-21AAdhesive bonding handbook

ECSS-E-HB-32-22AInsert design handbook

ECSS-E-HB-32-23AThreaded fasteners handbook

ECSS-E-HB-60AControl engineering handbook

ECSS-E-HB-60-10AControl performance guidelines

ECSS-E-TM-40-07ASimulation modelling platform (5 volumes)

ECSS-E-HB-32-26ASpacecraft mechanical loads analyses handbook

(as of 4 February 2014)

ECSS-E-TM-10-10ALogistics engineering

ECSS-E-TM-10-25AEngineering design model data exchange

ECSS-E-HB-32-25AShock analysis and testing handbook

ECSS-E-HB-20-02A Li-ion battery handbook

ECSS-E-HB-20-03A Magnetic cleanliness handbook

ECSS-E-HB-10-03A Testing handbook

ECSS-E-HB-31-03A Thermal analysis handbook

LEGENDLEGEND



HB Published TM made available

N N

N N

N

12


5 ECSS Policy and Configuration and information mangement documents

P-00 disciplineECSS Policy

D-00 disciplineConfiguration and information

management

ECSS Documentation

ECSS-P-00CStandardization objectives, policies and organization

ECSS-D-00AECSS processes

Published

LEGENDLEGEND



(as of 20 May 2014)


M

ECSS-D-00C UECSS-D-00-01CDrafting rules and template for ECSS Standards

ECSS-D-00-02ADrafting rules and template for ECSS Handbooks

ECSS-D-00-11ACriteria for acceptance for Public Review and Criteria for Handbook relase for publication

13

ecss - esa.vpsearch.nlesa.vpsearch.nl/.../6293/ecss-doc-001_issue7.115october2014.pdf · finally,...

Documents