drs enhanced overview - 2016
TRANSCRIPT
DRS PLATFORM OVERVIEW 2016
2
DRS Platform Introduction
EATON | DRS SERIES
Eaton’s Optimal Data centre solution.
The DRS Rack System offers the optimum solution for Data centre and IT Infrastructure whitespace. Designed to meet the demands of ever increasing equipment densities, whilst maintaining the benefits in cabling access and ease of installation. The DRS design is aesthetically pleasing, adaptable and reconfigurable. It will serve the user well over time as the IT environment changes and your data centre needs evolve.
3
DRS KEY FEATURES
EATON | DRS SERIES
Re-configurability & Remediation
• Available in 39U, 42U, 45U, 47U & 52U• Widths available: 600, 800 & 1000mm• Depths available: 600, 800, 1000, 1200 & 1400• Server door option enabling door to be opened 180° when
bayed together• Unit height labels and earth bonding kits as standard• 4-Point locking available with 4-Post offset• 2-Point locking as standard• Static load rating: 1500Kg• Dynamic load rating: 750Kg• Bolt together aluminium construction• Air management baffles to optimise and control airflow • Tool-less 19-Inch Mounting Rails• 19-Inch measurement strips for quick and accurate
positioning• Split side panels making it easier to service the rack
enclosure• Patented configurable frame: Centre, 4-Post &
offset frame options
4
DRS Rack System Frame Configurations
EATON | DRS SERIES
Various Options available to suit application
Centre Frame 4 Post Frame Centre & Rear Frame
5
DRS SERIES RACK ENCLOSURESInternal Rack Features
EATON | DRS SERIES
DRS racks can be bolted together with a simple bolt. 4 baying positions to enable maximum rigidity
Integral ratchet lever allows tool-less adjustment of the 19” Rails without the need of any tools.
M6 threaded channel and T-Slots offer unlimited fixing
positions for accessories
19” Rail position indicators & measurement strips
6
DRS SERIES RACK ENCLOSURESExternal Rack Features
EATON | DRS SERIES
4-Point locking available on 4 post configurations.
2-Point locking as standard.
DRS doors can be fitted with a range of locking options including unique, combination, electronic & networked locking.
Unique pin release system enables quick and easy removal and fitting.
Split and hinged side panels are simple to install & remove.
Locking pins enable the side panels to be fully or partially opened / removed.
7
DRS SERIES RACK ENCLOSURESDRS Integrated air management
EATON | DRS SERIES
DRS Vertical & horizontal baffles promote the
segregation of the cold air feed from the hot air
return and the avoidance of hot spots, which promotes improved cooling capabilities.
DRS can extend the 19” mounting rails in the base
of the rack to provide options for air blanking &
cable management
Interchangeable panels designed to meet the requirements of various
applications.
8
DRS SERIES RACK ENCLOSURESGeneral rack applications.
Eaton has developed a range of application led rack platforms to help shorten and simplify the decision making process. Many of the application configurations follow industry “best practices” offering best in class operation and efficiency .
• Basic Rack 600 & 800mm(w) • Network Rack 600 & 800mm(w)
• Active Rack 600mm(w) only• Active+ 600mm(w) only
• Switch Rack 800mm(w) only • Switch+ Rack 800mm(w) only • Cabling Rack 800mm(w) only
Heights: 42U, 47U & 52UDepths: Basic | Network | Switch | Cabling 875 - 1400mm(d)Depths: Active 1000 – 1400mm(d)
EATON | DRS SERIES
9
DRS GENERAL RACK ENCLOSURESGeneral Rack Portfolio
Available in 600mm and 800mm wide variants the Basic Rack is configured with solid doors front and rear. With the solid doors limiting air flow through the rack a ”Basic Rack” has the capability to support active equipment densities of up to 1.5kW, (subject to the room environment). A Basic Rack has limited overhead service entry points, typically offering entry points capable of servicing cabling volumes of around 120 cables, with optional accessories available to support backbone or patch cabling as appropriate. The base of the rack is open and the rack is configured with Nylon skids. A Basic Rack configuration typically provides the lowest cost configuration option but also has the lowest application flexibility.
EATON | DRS SERIES
DRS BASIC RACK (DB) - FEATURES
10
DRS GENERAL RACK ENCLOSURESGeneral Rack Portfolio
• Centre post configuration• Two pairs of 19” mounting rails • Unit height labels fitted to front and rear 19”mounting rails (numbered bottom to top) • Nylon skids • Doors configured LH hinged as standard • Doors fitted with standard key locking swing handle with 2-point locking • Glazed front door • Plain steel rear door• Top panel configuration: grommet entry panel rear all other panels are plain • Quick release side panels both sides • Earth bonding kit • Available in standard light grey or black
EATON | DRS SERIES
DRS BASIC RACK (DB) - SPECIFICATION
11
DRS GENERAL RACK ENCLOSURESGeneral Rack Portfolio
Available in both 600mm and 800mm wide variants, a “Network Rack” differs from a “Basic Rack” in that it is typically configured with vented doors front and rear. Configuring the rack with vented doors allows greater air flow through the rack space, increasing the rack’s ability to cope with active equipment densities to around 3kW per rack*. With regards to cabling infrastructure the “Network Rack” is configured to accept overhead cabling volumes of up to 120 cables and like the “Basic Rack” has an open base with fixed feet. A “Network Rack” configuration typically provides greater application flexibility at a moderately higher cost when compared to the “Basic Rack”. With equipment densities on the rise this configuration provides a more “future proof” option.
EATON | DRS SERIES
DRS NETWORK RACK (DN) - FEATURES
12
DRS GENERAL RACK ENCLOSURESGeneral Rack Portfolio
• 4 post frame configuration • Two pairs of 19” mounting rails • Unit height labels fitted to front and rear 19”mounting rails (numbered bottom to top) • Nylon skids • Doors configured LH hinged as standard • Doors fitted with standard key locking swing handle with 2-point locking • Hi-Flo curved vented front door • Flat vented rear door • Top panel configuration: grommet entry panel rear all other panels are plain • Quick release side panels both sides • Earth bonding kit • Available in standard light grey or black
EATON | DRS SERIES
DRS NETWORK RACK (DN) - SPECIFICATION
13
DRS GENERAL RACK ENCLOSURESGeneral Rack Portfolio
The “Cabling Rack” is a 800mm wide rack, configured with solid doors front and rear with the facility to accommodate active equipment densities of up to 1.5kW*. As most cabling structures are passive there is little need to provide higher levels of cooling capability, afforded with vented doors, indeed vented doors in this application could lead to poor installation efficiency. “Cabling Racks” are configured with overhead service entry points designed to accommodate cabling volumes of more than 120 cables, with optional accessories available to support backbone or patch cabling as appropriate. The “Cabling Rack” configuration provides the ideal specification for moderate density cabling application, promoting optimum system efficiency
EATON | DRS SERIES
DRS CABLING RACK (DC) - FEATURES
14
DRS GENERAL RACK ENCLOSURESGeneral Rack Portfolio
• Centre post configuration • Two pairs of 19” mounting rails • Unit height labels fitted to front and rear 19”mounting rails (numbered bottom to top) • Nylon skids • Doors configured LH hinged as standard • Doors fitted with standard key locking swing handle with 2-point locking • Glazed front door & plain steel rear door• Front vertical cable management fingers • Quick release side panels both sides • Top panel configuration, 2 plain and 2 enhanced brush strip • Earth bonding kit • Available in standard light grey or black
EATON | DRS SERIES
DRS CABLING RACK (DC) - SPECIFICATION
15
DRS GENERAL RACK ENCLOSURESGeneral Rack Portfolio
The “Active Racks are a 600mm wide rack configured for conventional server hosting, where the cooling air flow operates in a front to rear direction. The “Active Racks” are configured with vented doors front and rear, making it ideal for applications where space may be limited. The “Active Racks” include internal air management baffles promoting the segregation of the cold air feed from the hot air return and the avoidance of hot spots. Air segregation offers improved system efficiency by ensuring the cold air reaches the equipment at the lowest temperature, which promotes improved cooling capabilities, facilitating the housing of equipment densities of up to 5kW per rack*. Overhead service entry points are configured to allow data and power entries to be segregated in volumes of up to 120 cables. “Active Racks” provide for systems with moderate equipment density capabilities for efficient system operation. These configurations also provide the ideal basis for upgrade to contained aisles, offering further improvements in operational efficiency.
EATON | DRS SERIES
DRS ACTIVE RACKS – FEATURES
16
DRS GENERAL RACK ENCLOSURESGeneral Rack Portfolio
• Centre post frame configuration • Two pairs of 19” mounting rails • Unit height labels fitted to front and rear 19” mounting rails (numbered bottom to top) • Nylon skids • Doors configured LH hinged as standard • Doors fitted with standard key locking swing handle with 2-point locking • Hi-Flo curved vented front door, flat vented rear door • Quick release side panels both sides • Top panel configuration: enhanced brush entry panel rear all other panels are plain • Air management baffle kit• Earth bonding kit • Available in standard light grey or black
EATON | DRS SERIES
DRS ACTIVE RACK - (DA) SPECIFICATION
17
DRS GENERAL RACK ENCLOSURESGeneral Rack Portfolio
• Centre post frame configuration • Two pairs of 19” mounting rails • Unit height labels fitted to front and rear 19” mounting rails (numbered bottom to top) • Nylon skids • Single doors configured LH hinged as standard • Doors fitted with standard key locking swing handle with 2-point locking • Hi-Flo curved vented front door, double vented rear door • Top panel configuration: enhanced brush entry panel rear all other panels are plain • Quick release side panels both sides • Air management baffle kit • Earth bonding kit • Available in standard light grey or black
EATON | DRS SERIES
DRS ACTIVE+ (DE) RACK - SPECIFICATION
18
DRS GENERAL RACK ENCLOSURESGeneral Rack Portfolio
The “Switch Racks” are 800mm wide racks, arranged to deal with multi directional cooling demands, often encountered with network switches, where cooling equipment strategies run front to rear as well as left to right. “Switch Racks” are configured with vented doors. Like the “Active Rack” variants, the “Switch Racks” incorporate internal air management baffles designed to be able to cope with a mixture of styles of active equipment, whilst still supporting equipment densities of up to 5kW per rack*. Like the “Active Rack” the “Switch Racks” are configured to allow overhead data and power entries to be segregated. The default configuration allows the entry of around 120 cables but higher volumes can be accommodated if needed. Like the “Active Rack” the “Switch Racks” are able to manage moderate equipment densities and provide the ideal basis for upgrade to contained aisles.
EATON | DRS SERIES
DRS SWITCH RACKS - FEATURES
19
DRS GENERAL RACK ENCLOSURESGeneral Rack Portfolio
• Offset rear frame configuration • Two pairs of 19” mounting rails • Unit height labels fitted to front and rear 19” mounting rails (numbered bottom to top) • Nylon skids • Single doors configured LH hinged as standard • Doors fitted with standard key locking swing handle with 2-point locking • Hi-Flo curved vented front door, flat double vented rear door • Quick release side panels both sides • Top panel configuration: enhanced brush strip rear all other panels plain • Air management baffle kit • Earth bonding kit • Available in standard light grey or black
EATON | DRS SERIES
DRS SWITCH RACK (DS) - SPECIFICATION
20
DRS GENERAL RACK ENCLOSURESGeneral Rack Portfolio
• Offset rear frame configuration • Two pairs of 19” mounting rails • Unit height labels fitted to front and rear 19” mounting rails (numbered bottom to top) • Nylon skids • Doors fitted with standard key locking swing handle with 2-point locking • Double vented doors front and rear • Quick release side panels both sides • Top panel configuration: enhanced brush strip rear all other panels plain • Air management baffle kit • Earth bonding kit • Available in standard light grey or black
EATON | DRS SERIES
DRS SWITCH+ RACK (DP) - SPECIFICATION
21
DRS SERIES RACK AISLE CONTAINMENTGeneral Aisle applications.
Following the same principle as in-rack air management, the management and segregation of air in a room environment can offer some significant improvements in cooling effectiveness and efficiency helping to significantly reduce operational costs.
EATON | DRS SERIES
CONTAINED
Contained segregation avoids the mixing of supply and return air ensuring maximum equipment cooling effectiveness and efficiency. Supply air only has one direction to flow and that's through the active equipment.
UN-CONTAINED
Un-contained systems allow supply air to bypass the rack. Bypass air provides no cooling effect to the equipment and reduces the ambient room temperature, reducing cooling plant efficiency.
22
DRS SERIES RACK AISLE CONTAINMENTGeneral Aisle applications.
The DRS rack and aisle containment pod provides the optimum solution to the most testing Data Centre applications. Our pods are a completely modular approach to air containment allowing racks and components to be added as a facility changes and expands.
• Sliding Aisle Doors (Self Closing / Manual)
• Fixed Roof panels• Barrier Panels (To close off access to
EOA)
EATON | DRS SERIES
23
RACK ACCESSORIES Understanding what accessories are available & what is their purpose
EATON | 19” RACK EQUIPMENT
As mentioned in the 19-Inch Rack overview, there are a number of infrastructure accessories available to further improve, enhance & maintain rack efficiency. These are drilled down into 6 key segments
1. Top panels.2. Cable management. 3. Earthing. 4. Thermal.5. Shelving.6. Power.
24
TOP PANELSTop Panel Thermal & Cabling options
EATON | TOP PANELS
Vented Vented brush
2 or 3 way fan
Brush strip
Enhanced Brush strip Grommet Knockouts
25
SHELVING 19” Shelving Accessories
EATON | 19” RACK EQUIPMENT
Heavy duty sliding shelf Quick fit fixed shelf
Cantilever Shelf
Fixed Shelf Sliding Shelf
26
EARTHING Earthing Accessories that conform to BS EN60297-3-100:2009
EATON | 19” RACK EQUIPMENT
Earth bonding Kit
Earth bar & Earth Clamp
27
Thermal 19” Thermal Accessories
EATON | 19” RACK EQUIPMENT
19” Blanking PanelsRack Chimney
19” Fan Tray
28
CABLE MANAGEMENT Zero U cable management options.
EATON | 19” RACK EQUIPMENT
Trough SystemVertical Cable Tray
Horizontal Managers
Zero U
Finger Managers
JRP
29
CABLE MANAGEMENT Zero U and 19” mounting cable management options.
EATON | 19” RACK EQUIPMENT
Finger managers
Cable Hoops / Rings
30
CABLE MANAGEMENT 19” mounting cable management options.
EATON | MARK MATTHEWS
Finger managers
Cable Hoops / Rings
After