drilling technologies division providing drilling solutionsmy-spread.com/files... · providing...
TRANSCRIPT
Frank’s International [page 1 ]
This document contains confidential and proprietary information which is property of Frank’s International. None of the information contained herein may be disclosed, reproduced, distributed or used without prior written consent from Frank’s International. © 2016 Frank’s International. All rights reserved.
Drilling Technologies Division
Providing drilling solutions
Frank’s International [page 2 ]
This document contains confidential and proprietary information which is property of Frank’s International. None of the information contained herein may be disclosed, reproduced, distributed or used without prior written consent from Frank’s International. © 2016 Frank’s International. All rights reserved.
THE HARMONIC ISOLATION TOOL (HI TOOL™)
Frank’s International [page 3 ]
This document contains confidential and proprietary information which is property of Frank’s International. None of the information contained herein may be disclosed, reproduced, distributed or used without prior written consent from Frank’s International. © 2016 Frank’s International. All rights reserved.
THE HI TOOL™ DESIGN
Frank’s International [page 4 ]
This document contains confidential and proprietary information which is property of Frank’s International. None of the information contained herein may be disclosed, reproduced, distributed or used without prior written consent from Frank’s International. © 2016 Frank’s International. All rights reserved.
THE HI TOOL™ PRINCIPAL
Increased envelope
of operations
Stops bit tilt
Frank’s International [page 5 ]
This document contains confidential and proprietary information which is property of Frank’s International. None of the information contained herein may be disclosed, reproduced, distributed or used without prior written consent from Frank’s International. © 2016 Frank’s International. All rights reserved.
HI TOOL™ AT NB FOR ANTI-SLIP-STICK
STOP BIT ‘TILT’ / STOP BIT ‘SLIP-STICK’
Frank’s International [page 6 ]
This document contains confidential and proprietary information which is property of Frank’s International. None of the information contained herein may be disclosed, reproduced, distributed or used without prior written consent from Frank’s International. © 2016 Frank’s International. All rights reserved.
ENERGY EFFICIENT SYSTEM (MSE)
Definition: Energy required to destruct the rock (system efficiency)
CCS = Eb*MSE
MSE = (WoB/ ���)+(120*N*T/��*RoP)
Where: (At bit measurements - important)
CCS - Confined compressive rock strength
MSE - psi
WoB - lbs
r - hole radii (in)
N - rpm
T - torque (ft-lbs)
Eb - Efficiency at bit (%) (35% @ horizontal - 60% in vertical)
decreases further as the bit wears or gets damaged from vibration
The HI Tool™ improves Eb by increasing the
energy getting to the bit; reducing the system
energy loss from vibration.
Frank’s International [page 7 ]
This document contains confidential and proprietary information which is property of Frank’s International. None of the information contained herein may be disclosed, reproduced, distributed or used without prior written consent from Frank’s International. © 2016 Frank’s International. All rights reserved.
RSSRotary
HI PLACEMENT
Coring
OR
Frank’s International [page 8 ]
This document contains confidential and proprietary information which is property of Frank’s International. None of the information contained herein may be disclosed, reproduced, distributed or used without prior written consent from Frank’s International. © 2016 Frank’s International. All rights reserved.
UR/HO BHA’sHS motor/turbine
HI PLACEMENT
Milling
Frank’s International [page 9 ]
This document contains confidential and proprietary information which is property of Frank’s International. None of the information contained herein may be disclosed, reproduced, distributed or used without prior written consent from Frank’s International. © 2016 Frank’s International. All rights reserved.
Case StudyHI-2600-N tools utilised
26” Baker packed motor BHA
UK-NNS
Frank’s International [page 10 ]
This document contains confidential and proprietary information which is property of Frank’s International. None of the information contained herein may be disclosed, reproduced, distributed or used without prior written consent from Frank’s International. © 2016 Frank’s International. All rights reserved.
VIBE RECORDERS FOR 26” SECTION
VR directly above the HI Tool
Description
DP
(VR) sub
HWDP
Jars
DC’s
Saver/float sub
IB stab
Navi/Gamma
NM pony
NM stab
Motor
Sub (VR)
HI-2600-N
Sub (VR)
26” RC bit
Vibe direction
coming up from bit
VR directly below the HI Tool
HI Tool
Frank’s International [page 11 ]
This document contains confidential and proprietary information which is property of Frank’s International. None of the information contained herein may be disclosed, reproduced, distributed or used without prior written consent from Frank’s International. © 2016 Frank’s International. All rights reserved.
SIGNIFICANT SHOCK RISK REDUCTION
0
1000
2000
3000
4000
5000
6000
7000
8000
9000
10000
Low Bit Low After HI
15% Low Level Shock
Reduction
0
200
400
600
800
1000
1200
1400
1600
1800
Med Bit Med After HI
61% Medium Level Shock
Reduction
0
50
100
150
200
250
300
High Bit High after HI Tool
84% High Level Shock
Reduction
G
ONE SECTION – ONE BIT/BHA
Frank’s International [page 12 ]
This document contains confidential and proprietary information which is property of Frank’s International. None of the information contained herein may be disclosed, reproduced, distributed or used without prior written consent from Frank’s International. © 2016 Frank’s International. All rights reserved.
Case StudyHI-800-S TOOLS UTILIZED
8½” LATERALS (RSS BHA)
OFFSHORE NORWAY PROJECT
Frank’s International [page 13 ]
This document contains confidential and proprietary information which is property of Frank’s International. None of the information contained herein may be disclosed, reproduced, distributed or used without prior written consent from Frank’s International. © 2016 Frank’s International. All rights reserved.
HI Tool™ run summary
(1)8½” section
NO HI (benchmark)
(2)8½” section
HI-800-S
(3)8½” section
HI-800-S
Depth In (mMD) 4,121 m 4,125 m 4,557 m
Depth out (mMD) 5,084 m 5,104 m 5,500 m
Meterage (m) 348m + 615 m 979 m 943 m
RoP (m/hr) 17.97 m/hr 18.45 m/hr 18.29 m/hr
Bit type / dull outATK - FXD65R
(8,3,CR,N,X,In,BT,PR)ATK - FXD65RDR
(1,1,No,A,X,In,No,TD)ATK - FXD65DR
(1,0,No,X,In,No,TD)
Frank’s International [page 14 ]
This document contains confidential and proprietary information which is property of Frank’s International. None of the information contained herein may be disclosed, reproduced, distributed or used without prior written consent from Frank’s International. © 2016 Frank’s International. All rights reserved.
1ST LATERAL RESULTS (NO HI TOOL)
We recommended that they increase the rpm’s slightly to get rid of the
slip-stick (15-20rpm increase).
Frank’s International [page 15 ]
This document contains confidential and proprietary information which is property of Frank’s International. None of the information contained herein may be disclosed, reproduced, distributed or used without prior written consent from Frank’s International. © 2016 Frank’s International. All rights reserved.
2ND LATERAL RESULTS (HI INCLUDED)
New bit & same BHA RIH to TD the section with great results on all vibes.
Frank’s International [page 16 ]
This document contains confidential and proprietary information which is property of Frank’s International. None of the information contained herein may be disclosed, reproduced, distributed or used without prior written consent from Frank’s International. © 2016 Frank’s International. All rights reserved.
Small increase in rpm gave great vibe results in all fields.
3RD LATERAL RESULTS (HI INCLUDED)
Frank’s International [page 17 ]
This document contains confidential and proprietary information which is property of Frank’s International. None of the information contained herein may be disclosed, reproduced, distributed or used without prior written consent from Frank’s International. © 2016 Frank’s International. All rights reserved.
3 RUN COMPARISON
93.73%
6.14% 0.13%
Lateral
100.00%
0.00% 0.00%
Axial
67.78%
19.37%
12.85%
Slip-stick
1 (NO HI)
98.74%
0.76% 0.50%
Lateral
98.75%
0.50% 0.75%
Axial
93.30%
5.09% 1.61%
Slip-stick
2 (HI)
96.95%
2.63% 0.42%
Lateral
99.47%
0.11% 0.42%
Axial
97.60%
1.97% 0.43%
Slip-stick
3 (HI)
Frank’s International [page 18 ]
This document contains confidential and proprietary information which is property of Frank’s International. None of the information contained herein may be disclosed, reproduced, distributed or used without prior written consent from Frank’s International. © 2016 Frank’s International. All rights reserved.
Case StudyHI TOOL™ UTILIZED ON SEVERAL BHA’S WITH
ROTARY/RSS & RSS/UR
ONSHORE ITALY (VAL D’AGRI)
Frank’s International [page 19 ]
This document contains confidential and proprietary information which is property of Frank’s International. None of the information contained herein may be disclosed, reproduced, distributed or used without prior written consent from Frank’s International. © 2016 Frank’s International. All rights reserved.
HI Tool™
Section #1
22”
HI-2600-S
HI Tool™
Section #2
17½”
HI-1700-S
HI Tool™
Section #3
14¾”
HI-1200-S
HI Tool™
Section #4
12¼” x
13⅛”
HI-1200-S
HI Tool™
Section #5
10⅝”
HI-1200-S
HI Tool™
Section #6
8½”
HI-800-S
D in (mMD) 83 403 1,107 2,056 2,860 3,141
Meterage
(m)320 704 949 804 281 1,177
RoP (m/hr)
Benchmark
Actual
Improve
3.1
3.7
(20%)
2.9
10.0
(344%)
2.1
2.2
(5%)
0.7
3.2
(447%)
0.9
1.6
(78%)
1.7
4.2
(147%)
HI Tool™ run summary
Frank’s International [page 20 ]
This document contains confidential and proprietary information which is property of Frank’s International. None of the information contained herein may be disclosed, reproduced, distributed or used without prior written consent from Frank’s International. © 2016 Frank’s International. All rights reserved.
HI Tool™ with UR and VR’s
VR above the HI Tool
VR below the HI Tool
HI Tool between VR’s
Vibe direction
coming from UR
Frank’s International [page 21 ]
This document contains confidential and proprietary information which is property of Frank’s International. None of the information contained herein may be disclosed, reproduced, distributed or used without prior written consent from Frank’s International. © 2016 Frank’s International. All rights reserved.
SHOCK RISK RESULTS (UR SECTION)
4.6% less LOW level lateral shocks
89.1% less MEDIUM level lateral shocks
70% less HIGH level lateral shocks
G
Improved RoP 0.7m/h to 3.2m/h
Frank’s International [page 22 ]
This document contains confidential and proprietary information which is property of Frank’s International. None of the information contained herein may be disclosed, reproduced, distributed or used without prior written consent from Frank’s International. © 2016 Frank’s International. All rights reserved.
LONGEST 6” LATERAL RUN
MONTE ALPI 1B, ITALY
THE HI TOOL™ ON AN RSS
Depth In
(m)
Drilled
(m)
ROP
(m/hr)
Bit type
Dull out
Inclination
In/Out
Azimuth
In/Out
HI position
In BHAFormations
3,677m 795m 6 m/hrPDC
(1,1,BHA)89.5°/89.5° 352°/334° Above RSS
Hard
Limestone
HI Tool™ run
Record 6” section (ROP & Footage)
4x 2x
Frank’s International [page 23 ]
This document contains confidential and proprietary information which is property of Frank’s International. None of the information contained herein may be disclosed, reproduced, distributed or used without prior written consent from Frank’s International. © 2016 Frank’s International. All rights reserved.
Case StudyHI TOOL™ UTILIZED ON SEVERAL BHA’S WITH
ROTARY & RSS
ONSHORE SICILY
Frank’s International [page 24 ]
This document contains confidential and proprietary information which is property of Frank’s International. None of the information contained herein may be disclosed, reproduced, distributed or used without prior written consent from Frank’s International. © 2016 Frank’s International. All rights reserved.
HI TOOL’S USED IN 12¼” SECTION
Benchmark Tresauro-2 Tresauro-3
Bit type 547 547 537 447 437 437 417
Depth in (mMD) 675 850 1,025 695 1,190 820 1,071
Depth out (mMD) 850 1,025 1,200 1,190 1,528 1,071 1,506
Meterage (m)
(m improvement)175/run 495
(183%)338
(193%)251
(43%)435
(149%)
Drilling (hours) 58/run 97 52 73.8 74.7
RoP (m/hr)
(% improvement)3.0 5.1
(70%)
6.8
(126%)
3.4
(14%)
5.9
(96%)
Bit dull grade out 3,4,bt,a,ct,hr 1,1,wt,hr 1,1,wt,td 2,1,wt,hr 1,2,bt,td
Frank’s International [page 25 ]
This document contains confidential and proprietary information which is property of Frank’s International. None of the information contained herein may be disclosed, reproduced, distributed or used without prior written consent from Frank’s International. © 2016 Frank’s International. All rights reserved.
HI TOOL’S USED IN 8½” SECTION
Benchmark Cammarana-1 Giaurone-7
Bit type 637 617 547 517 517 PDC
Depth in (mMD) 2,400 2,525 2,650 2,446 2,557 2,453
Depth out (mMD) 2,525 2,650 2,775 2,552 2,807 3,222
Meterage (m)
(% improvement)125/run 106
(11%)250
(100%)769
(515%)
Drilling (hours) 39/run 18.3 50.1 126.1
RoP (m/hr)
(% improvement)3.2/run 5.8
(81%)
5.0
(56%)
6.1
(91%)
Bit dull grade on POOH 3,4,bt,a,ct,hr 1,1,wt,cp 1,1,wt,td 1,2,bt,td
Frank’s International [page 26 ]
This document contains confidential and proprietary information which is property of Frank’s International. None of the information contained herein may be disclosed, reproduced, distributed or used without prior written consent from Frank’s International. © 2016 Frank’s International. All rights reserved.
Case StudyHI-800-S TOOLS UTILIZED
BAKER CORING BHA
DEEPEST OFFSHORE GOM CORING
Frank’s International [page 27 ]
This document contains confidential and proprietary information which is property of Frank’s International. None of the information contained herein may be disclosed, reproduced, distributed or used without prior written consent from Frank’s International. © 2016 Frank’s International. All rights reserved.
HI Tool™ placement in BHA
Coring BHA
DP to surface
X-over
HWDP
DC’s
Jars
DC’s
HI Tool
Safety joint
Top stab
Core-barrel
Mid stab
Core-barrel
Mid stab
Core-barrel
NB stab
PDC core-head
Vibe direction
coming from string
Frank’s International [page 28 ]
This document contains confidential and proprietary information which is property of Frank’s International. None of the information contained herein may be disclosed, reproduced, distributed or used without prior written consent from Frank’s International. © 2016 Frank’s International. All rights reserved.
HI Tool™ coring summary
Deepest ever core run
in the GoM
HI Tool™
Core #1
8½” by 4”
HI-800-S
270ft barrel
HI Tool™
Core #2
8½” by 4”
HI-800-S
270ft barrel
HI Tool™
Core #3
8½” by 4”
HI-800-S
180ft barrel
Depth In (ftMD) 32,149 ft 32,372 ft 32,631 ft
Depth out (ftMD) 32,372 ft 32,631 ft 32,810 ft
Cored footage (ft) 223 ft 259 ft 179 ft
RoP (ft/hr) 10.3 ft/hr 9.6 ft/hr 10.4 ft/hr
Recovery 99.6 %
Efficiency 91.8 %
Frank’s International [page 29 ]
This document contains confidential and proprietary information which is property of Frank’s International. None of the information contained herein may be disclosed, reproduced, distributed or used without prior written consent from Frank’s International. © 2016 Frank’s International. All rights reserved.
HI Tool 100% Rigid 100% Rigid
Effective Dampening Zone
Theoretical
EFFECTIVE HI TOOL™ DAMPENING ZONE
Effective
Dampening/protected Zone
HI Tool™
Frank’s International [page 30 ]
This document contains confidential and proprietary information which is property of Frank’s International. None of the information contained herein may be disclosed, reproduced, distributed or used without prior written consent from Frank’s International. © 2016 Frank’s International. All rights reserved.
Less Trips, Less Cost,
Improved Safety
HI-NBNO-HI
WHAT’S IN IT FOR THE CLIENT (KPI’S)
Frank’s International [page 31 ]
This document contains confidential and proprietary information which is property of Frank’s International. None of the information contained herein may be disclosed, reproduced, distributed or used without prior written consent from Frank’s International. © 2016 Frank’s International. All rights reserved.
Over 800 runs globally,
81% improvement in
RoP &/or footage !(Nothing left down hole)
PROVEN TRACK RECORD
Frank’s International [page 32 ]
This document contains confidential and proprietary information which is property of Frank’s International. None of the information contained herein may be disclosed, reproduced, distributed or used without prior written consent from Frank’s International. © 2016 Frank’s International. All rights reserved.
Drilling Technologies Division
Providing drilling solutions